More Than Just A Dental Lab...CAD/CAM dentistry. DTS International now operates as an intergrated group of companies which includes DTS, Core3dcentres, and Cordent (our sales company

More Than Just A Dental Lab

Our History ---------------------------------------------------------- 01DTS Today ----------------------------------------------------------- 02

Crown and Bridge ----------------------------------------------------- 03Crystalite ------------------------------------------------------------------ 04Opalite -------------------------------------------------------------------- 05Enamic ------------------------------------------------------------------- 06IPS e.max CAD ----------------------------------------------------------- 07Lava Classic -------------------------------------------------------------- 08Layered Zirconia ---------------------------------------------------------- 09Standard PFM ------------------------------------------------------------ 10Shade taking with Digital Photography ---------------------------------- 11

Implants --------------------------------------------------------------- 12Full Arch Restorative and Bars ------------------------------------------- 13Implant Restorative ------------------------------------------------------- 14Fixed Price Implant Solutions -------------------------------------------- 15IC Simplicity --------------------------------------------------------------- 17

Acrylic ----------------------------------------------------------------- 18Full Acrylic Dentures ------------------------------------------------------ 19Flexible Dentures --------------------------------------------------------- 20Partial Acrylic dentures --------------------------------------------------- 21Peek Dentures ------------------------------------------------------------ 22Digital Smile Design ------------------------------------------------------ 23Implant Guide Service ---------------------------------------------------- 24

Chrome Casting ------------------------------------------------------ 25Tooth-Coloured / Clear Clasps ------------------------------------------- 26

Orthodontics ---------------------------------------------------------- 27Whitening ----------------------------------------------------------------- 28Functional Appliances, Retainers, Expansion Appliances --------------- 29Fixed Appliances, Splints, Sleep Apnea Devices, Models --------------- 30

Specialist Services ---------------------------------------------------- 31Mouthguards ---------------------------------------------------------- 32

TABLE OF CONTENTS

Our HistoryIn 1945, my father W M R Littlejohn started his ownsmall laboratory after serving his apprenticeship with his ambitions to be his own boss after the war.

The NHS was the main provider of dentistry with dentures and a few orthodonics the only restorations made. I had served a good part of my apprenticeship working in the school holidays by the time I was 16. It was a natural progression to continue in the business when I left school.

When I joined the laboratory, the busi-ness comprised of four employees. We expanded the business gradually until my father retired in 1969. My wife Sheena was also involved in the busi-ness. As well as bringing up our three sons, she was responsible for running the wages department.

The lab joined the Dental Laboratories Association (DLA), where I served on the council for 20 years and was Vice Chairman, Chairman, and Past Chairman for six years. After much discussion with others on the council it was decided that the DLA had to change in order to allow its member laboratories to progress and grow.

First, the structure of the DLA was altered with Trevor Roadley being appointed the full-time director. More transitions were made and - as I was out of the laboratory for considerable periods of time - I delegated some parts of the business. The experience I gained in delegating and organising the DLA during this period I believe laid the management foundations which have helped me build the laboratory to the position it is in today.

When expanding the company, I needed to be aware of any new tech-niques that were coming on to the market. I travelled extensively abroad to seminars and dental exhibitions. My three sons are now part of the company and run the day-to-day operations. They still pursue this strategy which gives DTS an edge on its competitors, and has propelled the laboratory to where it is today. DTS now has over 100 employees and we serve much of Europe alongside the UK. Over the last decade we have built up a dedicated team who specialise in all major implant systems. My son, Sandy Littlejohn, heads up this team having spent time working with many of the major implant centres globally.

DTS became the first lab in the UK to install Lava milling machines which quickly became an outsourcing centre for more than 200 labs across the country. The following year, in 2005, this area of the business became an independent part of DTS trading as ZMC (the Zirconia Milling Centre).

In 2007, we began expanding our laboratory space to accomodate our digital operations. All of our digital systems were moved into what is now one of the most modern and fully digital laboratories in the UK and Europe. Along with my sons we founded the Core3dcentres group in 2008. In March of that year, we invited other dental labs from across

the world to start a collaboration of businesses and machinery to allow us to compete in this developing market. Core3dcentres is now in over 10 countries and is still growing, and it is recognised as the world leader in CAD/CAM dentistry. DTS International now operates as an intergrated group of companies which includes DTS, Core3dcentres, and Cordent (our sales company which I founded in 1984).

We believe that having good working relationships with our customers is essential, and the transition from the wax knife and Bunsen to CAD/CAM and Rapid Prototyping is quite amazing. It is difficult to imagine what the future will bring - but given our track record I am confident that DTS and its group of companies will remain at the forefront.

Alex Littlejohn, Managing Director

1

With more than 75 years of industry experience spanningfour generations, the DTS team boasts an unsurpassedrecord of excellence and performance in the realm of dental technology.

Our motto is “more than just a dental lab” and we pride ourselves on providing industry leading adoption of new technology, and ongoing training and development of key people to efficiently deliver a full suite of traditional and digital laboratory services.

We also offer a wide range of support services, workshops, and seminars, laboratory visits and marketing assistance.

More than just a Dental Lab 0141 556 5619 for local support dts-international.com

IMPRESSION OPTIONSAs one of the most advanced laboratories in the UKwe can accept all types of impressions - from those taken using traditional methods to fully digital scan files.

DTS Today

More than just a Dental Lab | 0141 556 5619 for local support | dts-international.com

2

Crownand Bridge

MATERIAL OPTIONS

DTS offers you access to all of the traditional and modern materials however you choose to take impressions. We have a wide range of handmade metal and metal free resto-rations to digitally manufactured metal and metal free restorations. For optimal results we recommend the full digital workflow.

STANDARD AND INDEPENDENTOPTIONS

DTS offer the broadest range of different systems with various levels of customisation to suit your requirements and budget.


DTS offers a large range of traditional and moderncrown and bridge restoration services.

3

SANDY LITTLEJOHNDirector

Why place a Premium Restoration?

“Premium restorations are the very best replacement for natural dentition both functionally and aesthetically.”


The new Crystalite crown is a material revolution for dentists who love aesthetics and excellence. A highly biocompatible material with outstanding transparency. The Crystalite system combines known positive properties of zirconia with significant increase in translucency as is known only from lithium disilicate. This material is perfect for all highly aesthetic treatments in anterior and posterior tooth regions.

4

CrystaliteImpression technique Digital or traditionalMaterial Monolithic super translucent zirconiaIndications Full mouth, crowns, implantsRecommended use Full mouth, single crownsMargins Feather edge, chamfer or shoulderCementation Conventional cementationEtch N/ARecommended adhesive 3M™ RelyX™ Unicem 2Turnaround time 5 lab daysMethod of manufacture Digitally designed and manufacturedAesthetics Shades / colouring No internal effects, standard shadesStrengthAdd-on options Fit to dentureBenefits High durability extreme strength metal-free,exceptional accuracyWarranty 10 yearsType Premium crownPopularityStrength >750MPa

Opalite™ is monolithic zirconia andrequires much less preparation space than traditional crowns. Every dentist has experienced challenging situations with bruxers and grinders. With an exceptional fleural strength of 1100MPa Opalite restorations are virtually clinically unbreakable. Opalite all-zirconia crowns and bridges are designed digitally and milled from zirconia using CAD/CAM technology before being polished to a smooth finish with a similar lustre to a full gold crown for minimal abrasion.

OpaliteTM


5

Impression technique Traditional or DigitalMaterial Monolithic translucent zirconiaIndications Full mouth, crowns, bridges, implantsRecommended use Full mouth, crowns, bridges, implantsMargins Feather edge, chamfer or shoulderCementation Conventional cementationEtch N/ARecommended adhesive 3MTM RelyXTM Unicern 2Turnaround time 5 lab daysMethod of manufacture Digitally designed and manufacturedAestheticsShades / colouring No internal effects, standard shadesStrengthAdd-on options Fit to dentureBenefits High durability, extreme strength, metal-free, exceptional accuracyWarranty 15 yearsType Standard CrownPopularityStrength 1200MPa

Full Crown

VITA ENAMIC® is the first dental hybrid ceramic in the world with a dual network structure. In this dental material. the dominant ceramic network is strengthened by a polymer network. with both networks fully integrated with one another. In addition to a high degree elasticity, this innovative hybrid ceramic guarantees particularly high load capacity after adhesive bonding.

Features/Benefits• Enormous load capacity since masticatory forces are absorbed• Reduction of wall thickness possible to

achieve restorations that are gentle on oral substance

• Highly precise and particularly accurate results• Tooth-like material properties


6

Impression technique Digital or traditional

Material Hybrid ceramic

Indications Full mouth, crowns, inlays, onlays, implants

Recommended use Posterior crowns, implants

Margins Feather edge, chamfer, shoulder

Cementation Adhesively bonded

Etch Hydrofluoric acid

Recommended adhesive 3M™ RelyX™ Ultimate

Turnaround time 5 lab days

Method of manufacture Digitally designed and manufactured

Aesthetics

Shades / colouring No internal effects, standard shades

Strength

Add-on options N/A

Benefits Minimally invasive, shock absorbing

Warranty 5 years

Type Standard crown

Popularity

Strength 150-160MPa

Enamic®

Full Crown


IPS e.max® CAD utilises the same high performance lithium discilate ceramic material as traditional pressed IPS e.max® matching its aesthetic qualities, while also giving all advantages of CAD/CAM manufacture including accurate fit and consistent quality.

These single unit crowns are milled by Core3dcentres, an Ivoclar Vivadent authorised milling centre, with DMG - HSC 20 Ultrasonic machines. This innovative crown is 2.5 to 3 times stronger than layered porcelain crowns at 360-400 MPa.

IPS e.max® CAD is an ideal material for crowns as it exhibits aesthetic properties of both translucency and opalescence.

7


Material Ivoclar™ e.max lithium disilicate

Indications Full mouth, crowns,

Recommended use Full mouth, single crowns

Margins Chamfer or shoulder

Cementation Conventional cementation or adhesively bonded

Etch Hydrofluoric acid

Recommended adhesive 3M™ RelyX™ Ultimate


Method of manufacture Digitally designed and manufactured

Aesthetics

Shades / colouring Customised shading

Strength

Add-on options N/A

Benefits Premium aesthetics, excellent fit, metal-free

Warranty 5 years

Type Premium crown

Popularity

Strength 360±60MPa

IPS e.max® CAD

Full Crown


8

Impression technique Digital or traditionalMaterial Premium 3M™ zirconia coping, with multi-layered porcelain overlayIndications Full mouth, crowns, bridges, implantsRecommended use Full mouth, crowns, bridges, implantsMargins Chamfer or shoulderCementation Conventional cementationEtch N/ARecommended adhesive 3M™ RelyX™ Unicem 2Turnaround time 5 lab daysMethod of manufacture Digitally designed and manufactured then built up with porcelain by handAestheticsShades / colouring Internal effects customised shading multi-layeredStrengthAdd-on options Fit to denture, rests and ledgesBenefits Premium aesthetics, excellent fit, metal-freeWarranty 1 year complete, 15 years for frameworkType Premium crownPopularityStrength 90-120MPa

The Lava™ system from 3M™ is one of our most prestigous Premium crown and bridge options. All Lava™ products are created using 3 shape software in conjunc-tion with CAD/CAM technology. The CAM process results in excellent fit, due to high milling accuracy and calculation of the sintering shrinkage via the system’s software. Lava™ closely mimics nature in appearance, with a choice of individually coloured, translucent frameworks in eight dif-ferent shades. The fracture strength of zirconium oxide is many times higher than that of conventional all-ceramic materials, far exceeding the stress requirements of the oral cavity.

Full Crown

LavaTM Classic

The Layered zirconia is an aesthetically pleasing and cost-effective restoration.

The zirconium oxide used is fully biocompatible and meets high aesthetic expectations due to its tooth-like colour. CAD/CAM manufactured for excellent fit and the material used is exceptionally strong it can be used to make single copings and large-span bridges with up to 14 units as well as abutments and primary components.

Layered Zirconia


9

Impression technique Digital or traditionalMaterial Zirconia (layered) coping with porcelain overlayIndications Full mouth, crowns, bridges, implantsRecommended use Full mouth, crowns, bridges, implantsMargins Feather edge, chamfer or shoulderCementation Conventional cementationEtch N/ARecommended adhesive 3M™ RelyX™ Unicem 2Turnaround time 5 lab daysMethod of manufacture Digitally designed and manufactured (Framework) & built up by handAestheticsShades / colouring No internal effects, standard shadesStrengthAdd-on options Fit to denture, rests and ledgesBenefits Good fit, metal-freeWarranty 1 yearType Standard crownPopularityStrength 90-120MPa

Full Crown

PFM crowns are available as standard or premium varieties depending on you budget and the required level of customisation.

The standard PFM restoration covers all the basics in standard VITA classic shades. Made to the same high quality as every DTS Dental crown, standard PFM’s are a cost effective restoration using traditional materials.

Standard PFM


10

METAL FREE ALTERNATIVE:- Opalite- Layered Zirconia- Lava™ Plus- VITA Enamic®- Celtra® Duo


Material Semi-precious or precious alloy coping

with layered porcelain overlay

Indications Full mouth, crowns, bridges, implant

Recommended use Full mouth, crowns, bridges, implant

Margins Feather edge, chamfer or shoulder

Cementation Conventional cementation

Etch Sand blast

Recommended adhesive 3M™ RelyX™ Unicem 2


Method of manufacture Hand layered

Aesthetics

Shades / colouring Internal effects customised shading multilayered

Strength

Add-on options Fit to denture, attachments etc. Charges apply

Benefits Traditional method, choice of alloys

5x microscope fit

Warranty 6 years

Type Standard crown

Popularity

Strength 90-120MPa

Full Crown


11

Shade Taking withDigital PhotographyDigital photography has become a priceless tool in the dental industry.Its uses can provide much more consistent results when trying to match shades.It can be done easily and quickly and helps with more than just the shade. Other information it provides the tech-nician include a labial characterisation. soft tissue blanching, gingival hue, glaze texture, and internal character-istics such as mamelons and check lines. Any digital camera or smart phone can be used.

Shade photos should be taken prior to commencing preparation so the tooth does not dry out and lighten in colour. First decide which tooth you wish to match. If the 11 is being restored, it is best to photograph the 21 as it is

tooth that the crown should match. Decide which shade tab is most like the patients tooth which will be matched. invert the shade tab(s) and sit it (them) edge to edge With the tooth to be matched. Ensure the patients mouth is open to create a black background behind tooth and shade tab and take your tirst photo. Notice the finish on the teeth which allows the technician to know what texture and glaze techniques to use. It also shows the labial characterisa-tion in detail ensuring the light reflec-tion will be matched With accuracy.

Shape and contour Will be designed from the teeth on the model therefore not making it necessary to photo-graph any other teeth. A second and third photo with different shade tabs can help too. For all ceramic crowns and veneers please proVide pho-tos of the underlying preparation so it can be masked when necessary. A black and white photo can also help with getting the value correct but this can be done in the laboratory.


12

DTS Provides a wide range of implant- supported restorations, fixed or removable crowns and bridges, over dentures and full-arch restorations. We continuously strive to keep up to date on the latest techniques and components on all available systems. DTS has been able to support its customers with state of the art im-plant-supported prosthetic work for many years.

Implants


13

DTS DENTAL LABORATORY HAS SPENT MANY YEARS PERFECTING THE ART OF FULL ARCH RESTORATIVE RECONSTRUCTION.

Full arch implant supported restorations are becoming increasingly popular due to the accuracy and predictability CAD /CAM solutions can provide. DTS Dental Laboratory is able to provide patients with the latest innovations in implantology through our partnership with core3dcentres. We provide a wide range of full arch fixed removable overdentures, fixed removable overdentures, fixed hybrid dentures and full arch zirconia or porcelain fused to metal bridges.

All of our solutions are designed and created with the latest CAD /CAM technology and are in turn manufactured using industrial milling technologies. This innovation provides complete stress and distortion free results which are created when using traditional manufacturing techniques. Thanks to CAD / CAM milling techniques, frameworks are now stronger than ever and show no solder or laser welds, meaning corrosion and fracture hazards are no longer a factor.

Full Arch Restorative and Bars

REMOVABLE OVERDENTURES FIXED HYBRID DENTURES

FULL ARCH FIXED BRIDGESFIXED REMOVABLE OVERDENTURES


14

DTS Dental Laboratory specialises in implant dentristry. Our specialist team is highly trained in all aspects of implant resorative manufacture and are dedicated in finding solutions to even the most challenging cases. Our expertise in this field has seen us work with some of the most respected Implant Surgeons, Maxillofacial Surgeons and Prosthodontists in the country and has allowed us to become one of the leading implant laboratories throughout UK. The technical support from DTS Dental Laboratory will provide invaluable support when planning your more difficult cases and we like to ensure each case is looked at with a holistic approach to ensure the best possible outcomes for your patients.

We ensure all our restorations function correctly and maintain stability long term in the mouth. We focus on high end cosmetics and proper phonetics; and ensure correct soft tissue management for hygiene and aesthetic.

We work with all implant brands currently available in UK and we are happy to be involved with the case planning of each and every case.

Implant Restorative

15


16



17

AcrylicDTS Dental Laboratory acrylic department has been servicing dentists since 1936. Acrylic work is the foundation of the company and what we do best! Our four senior acrylic supervisors have over 110 years experience between them and together they ensure that all acrylic work maintains a high level of quality, professionalism and individual service. we accept all varieties of acrylic work and our large and dedicated team of techinicians and supervisors are always available to assist yo in providing well fitting and aesthetically pleasing work.


18


19

FULL ACRYLIC DENTURESDesigned to replace dentition in an edentulous mouth. Dentures can be constructed in a combination of metal and acrylic, or purely out of the diverse acrylics. Now available in Vertex.

MATERIALS:• Heraeus Paladent 20 heat cured acrylic• Heraeus. Vita and Ivoclar teeth• Cast metal: full palate, full mesh palate• High impact acrylics• Soft linings• Gold inlays• Vertex

PROCESSES:• Cold cured• Heat cured• Injection moulded• Pressure and heat packed• Characterisation: rugae. labial buccal carving and tinting


20

FLEXIBLEDENTURESThermo-plastics are a versatile materialoften prescribed for flexible removable partial dentures, as they are stronger, more flexible and reduce chair time. The invasive procedures and the cumbersome materials associated with rigid partials are eliminated and there are fewer steps in the treatment process because preparation of natural teeth is unnecessary. As there is no metal frame, the fabrication and try-in processes are simplified. The choice of a thermo-plastic partial also avoids the use of metal, for higher patient satisfaction. Thermo-plastics are appropriate for a wide range of challenging cases due to their adaptability and the virtually invisible support which they provide.


21

Partial dentures are designed to replace missing dentition and prevent healthy dentition frommigrating due to a loss of proximal or opposing teeth. The general objective with partial dentures is to prevent problems which might occur if teeth migrate out of their natural dimension and position. Various problems can arise due to migrating dentition, such as issues with occlusion, Temporomandibular Joint (TMJ) headaches, ear aches, or even difficulty moving the jaw due to extreme pain. These issues can sometimes be initially identified by a clicking or popping sound. Generally, partial dentures have appropriately placed retaining clasps, which can be made of chrome, stainless steel or flexible clear/tooth coloured matched material for aesthetic purposes. Partial dentures can be constructed in a combination of metal and acrylic, or purely out of the diverse range of acrylics available.

PARTIAL ACRYLIC DENTURES


22

PEEK provides patients with an innovative alternative solution tocobalt chrome dentures. PEEK dentures are made from a medicalgrade polymer and have a high strength to weight ratio. PEEK is available in a natural, non-contrasting colour, meaning it looks more natural in the patient’s mouth.

Advantages• PEEK is stronger than metal per gram and has been replacing metal in medical and industrial applications for over a decade.• It has a long term clinical history and has been used in over 4 million implants in orthopedics.• PEEK material eliminates the metal taste and hot or cold sensations when eating and drinking. The flexibility of the material ensures the denture is easy to insert and remove.• Can be used for Temporary implant placement.• Can be used for Unilateral implant dentures.

Indications:• Partial Removable Dentures• Implant Dentures and Implant Bars• PEEK cannot be made through traditional methods

PEEK Dentures

Allow DTS to take control of your case for you.

Full Face Retracted

12 O’clock View Occlusal View/Model or DigitalImpression

Please provide distance in mm between distal of the centrals

Full Face Smile

Contact us for more information on0141 556 5619


23

the DSD seeks to present to the public a new face of dentistry, more humanistic, emotional and artistic, further enhancing our noble profession before the society, because after all there are not many things in life more important than a healthy, natural, confident and beautiful smile!

The concept aims to assistthe dentist in 3 aspects:- Improve the Aesthetic Planning and Smile Design.- Improve communication between specialists involved in the case.- Improve communication with the patient, increasing their participation in the designing process of their own smile design, motivating and educating them about the benefits of the treatment and increasing the case acceptance.

What is DSD?

Implant Guide ServiceDTS are proud to introduce our new Implant Guide Service.

At DTS we have devised another

even more straightforward. Simply send your scans to us and we will provide you with a fully planned case and guide.This service is available either partially or fully guided and can be tailored to your requirements.

Our Implant Guide Service is available for only £250. Contact us for more information.

How Does it Work?

Step 3: Our specialist will fully plan the case and guide for you.

Step 4: They will then contact you at the time of your choosing for a consultation to discuss and

review your implant case. These are available from 4:30pm - 9:00pm.

Step 5: This info will then be sent to DTS who

will send it back to you.

Included in the guide will be a fully printedproctocol complete with images.

Our new guide material uses the latest colour code technology to enhance protocol in that it will only turn clear when it has been sterilised in an auto clave.Contact us today for more information.


24

23


25

Chrome CastingOur highly-trained technicians are at the forefront of technology with regards to cast partial design. We use high tensile strength cobalt chromium, the finest ultra thin frameworks, and strong flexible clasps that are strain resistant, lightweight and have proven bio-compatibility. We can also provide masking for anterior backings to improve function and make the restoration more natural in colour. DTS Dental Laboratory offers 5 lab-day turnaround times for chrome cast partials.

Tooth Coloured / Clear Clasps


DTS Dental Laboratory delivers a broad variety of tooth-coloured, tissue-coloured and translucent clasps that exhibit incredible colour stability.Tooth-coloured clasping makes a viable alternative to metal clasps. They possess high tensile and shock strength with excellent resiliency, allowing the clasp to flex over extreme undercuts while still providing a comfortable fit. They offer an array of tooth-coloured and tissue coloured clasps that exhibit incredible co-lour stability. These shaded clasps may also be used on existing metal partial dentures for an aesthetically enhanced yet highly functional result. They have excellent elastic memory and can be used in situtations where metals are contra-indicated.

26

PARTIAL UPPER / LOWER

CHROME CASTING

UNILATERAL

MESH PLATE

NEW CAD / CAM CHROME PROCESS

OrthodonticsDTS Dental Laboratory provides a wide range of orthodontic appliances. We understand that orthodontics is a specialised area which requires technicians to have a greater understanding of how to make the appliances. We also realise that it is crucial to provide a quick and professional service for the busy Orthodontic clinician.


27

28



29

We Now Accept Digital Impressions for Orthodontic Work

30



31


32


33

Would you like a more convenient wayof managing your accounts? CALL

Register for our customer portal todayto pay, review or print your accounts ata time convenient to you.dts-international.com/accounts

0141 556 5619

Documents

More Than Just A Dental Lab...CAD/CAM dentistry. DTS International now operates as an intergrated group of companies which includes DTS, Core3dcentres, and Cordent (our sales company