Upload
nguyendung
View
213
Download
0
Embed Size (px)
Citation preview
Complete Family of Posts and Core for Any Clinical Situation
| [email protected] | coltene.com 2
ParaPost®
ParaCore®
ParaPost Fiber Lux®Light transmitting, esthetic and metal-free
ParaPost® XHIdeal for glass-ionomer/composite core build-ups that require the safety of a passive post
ParaPost® XPIdeal for multi-rooted post/core build-ups
Dual-cured, glass-reinforced composite for post cementing, core build-ups and crown & bridge cementation.
3 Indications – 1 Material3 Colors – 2 Timings – 1 Material
Parallel
Complete Family of Posts and Core for Any Clinical Situation
| [email protected] | coltene.com 3
ParaForm®
ParaPost Taper Lux®Light transmitting, esthetic, metal-free tapered restorations
ParaPost®XTIdeal for glass-ionomer/composite core build-ups that require extra retention and safety
ParaPost® XP - CastingIdeal for clinical situations requiring the additional strength of a precise, one-piece cast post/core and choice of alloy
Plastic core build-up forms.
Ideal for direct core build-upsAvailable in 10 sizes
TaperLab Threaded
| [email protected] | coltene.com 4
Fiber Posts
ParaPost Fiber PostsParaPost Fiber Posts are made of translucent fiber resin material that reflects the natural hues of the tooth and eliminates shadows through composite restorations at the gingival/crown interface.
Fast On-Command CementationThe translucent, light transmitting fiber resin material in ParaPost Fiber Lux and ParaPost Taper Lux posts allows them to be used with light-cured cements and core materials. This gives greater control over cement set time, and the convenience of being able to use dual- or self-cured materials.
Superior Head DesignThe rounded head design of the Fiber Posts reduces stress in the core material. Posts that have heads with sharp edges or angles create stress points in the core material that can lead to micro-fractures. Using computer analysis* and imaging, areas of stress concentrations can be predicted. Red indicates areas of greatest stress. Note the stress points at each sharp edge of the post with a non-rounded head design.
Comprehensive Range of SizesParaPost Fiber Lux comes in six sizes and ParaPost Taper Lux in four. This range of sizes allows a good match of post to canal size, minimizing the amount of dentin that needs to be removed. Each post is color coded for easy identification.
Superior StrengthThe high percentage of unidirectional fiber gives the ParaPost Fiber Lux and ParaPost Taper Lux posts excellent strength characteristics, without compromising flexibility.
Excellent RadiopacityThe radiopacity of the ParaPost Fiber Lux and ParaPost Taper Lux material allows the posts to be seen clearly on a radiograph.
Cross Section of Fiber Lux Post
Restoration with metal post
Restoration with Fiber Lux
ParaPost Fiber Lux Other Post
* Finite Element Analysis by SAS Ingenieurbüro AG, Switzerland
Radiograph of Fiber Lux, Taper Lux and three other fiber posts.
Superior Esthetics
| [email protected] | coltene.com 5
Fiber Posts
Material Composition (by weight)Glass Fiber 33%Resin 67%
Physical PropertiesFlexural Strength 1,125 MPaFlexural Modulus 21,256 MPaExcellent Radiopacity 272%
Fiber Post Drills
* Finite Element Analysis by SAS Ingenieurbüro AG, Switzerland
ParaPost Fiber LuxUses standard ParaPost Drills (parallel).
ParaPost Taper LuxUses ParaPost Taper Lux Drills (tapered). ParaPost Taper Lux drills are distinguishable by an additional black color band.
Tenax Starter DrillUse for fiber post removal.
7 9 11 mm
Tapered Drillidentification band - black
7 9 11 mm
1.5 mm
.04 Taper
RetentionLedges
ParaPost Fiber LuxStandard ParaPost parallel design for universal post applications
Provides greatest surface area for post cementation
Rounded, undercut head design for optimal core retention
ParaPost Taper LuxTapered post design for narrow canals
Rounded, undercut head design for optimal core retention
Three head design for easy post length adjustment
ParaPost Taper Lux
“ParaPost kit is one of the most organized kits on the market…”
“The posts come in a useful variety of sizes, and are radiopaque.”
“I love the taper design for narrow canals.”
| [email protected] | coltene.com 6
ParaPost X System
ParaPost X SystemA complete family of posts for any clinical situation
State-of-the-art universal endodontic post system for all direct and casting techniquesStandardized system with seven sizes including two intermediate sizesNon-end cutting, depth-calibrated drills for precise canal preparation Diamond pattern design, multiple venting channels
ParaPost XP ParaPost XHStandard ParaPost flat head is ideal for multi-rooted core build-ups.
Patented, raised diamond-shape retention pattern provides: Resistance to rotation* Superior tensile retention Improved cement venting
Unique manufacturing technique provides: Increased resistance to oblique forces.
Available in titanium alloy or stainless steel.
Chamfered for ease of insertion.
Rounded edges of the head minimize stress points that could lead to core failure.
Undercut, slotted head securely locks on glass ionomer and composite core materials firmly and easily.
Patented, raised diamond-shape retention pattern (identical to ParaPost XP) provides maximum retention and venting of excess cement.
Parallel sides distribute functional stress equally along the entire length of the post.
More retentive head adds additional undercuts to facilitate “locking on” of glass-ionomer and composite core build-ups.
Two intermediate sizes, 4.5 and 5.5, permit fitting the post to the canal versus the canal to the post.
Chamfered for ease of insertion.
*Source: Lucius Pitkin Inc., Consulting Engineers, Testing Laboratories
| [email protected] | coltene.com 7
ParaPost XT ParaPost XP Casting Rounded edges of the head minimize stress points that could lead to core failure.
Undercut, slotted head securely locks-on glass-ionomer and composite core materials firmly and easily.
Broad, flat shoulder stop provides security against over-insertion and the build up of apical stress.
Patented, low-profile threads cut a clear path through the dentin, minimizing insertional stress. The interruptions permit venting of excess cement and dentin debris to relieve hydrostatic pressure.
Threads are located only in the stronger coronal section where root canal walls are thick. Apical trimming of post will not affect mechanical retention.
Passive, raised diamond-shape retention pattern in the apical section, where root canal walls are more sensitive to fracture, provides additional retention and greater resistance against rotation.
Parallel sides distribute functional stress equally along the entire length of the post.
Chamfered for ease of insertion.
Parallel-sided castings evenly distribute functional stress while eliminating the wedging effect of tapered cast posts.
All system components are color-coded to the drills, ensuring accurate matching of posts to drills.
Chamfered for each of insertion.
| [email protected] | coltene.com 8
ParaPost XP Casting System
ParaPost XP Casting System
1.5 mm(min.)
5 mm
11 mm
9 mm
7mm
Step 1Prepare using the One-Office-Visit technique. Starting with the ParaPost X Drill that corresponds to the last Gates-Glidden or Peeso Drill used, gradually step up to the next larger drill until the pre-planned diameter and depth are achieved.
Step 2Use a corresponding plastic impression post to take the impression. This eliminates the need to fill the post space with impression material and ensures replication of the entire length of the post space without any undercuts.
ResultThe result is a predictable and precise fitting cast post and core which eliminates the need for adjustments and remakes.
Step 3The precision-fit of the titanium temporary post allows the temporary restoration to be placed without temporary cement on the post itself. This permits easy removal of the temporary restoration, eliminates time consuming removal of temporary cement from the post space and preserves the integrity of the post space preparation.
Step 4On the master model, the impression post is replaced with a corresponding burn-out post. This provides a precise post pattern with a retention pattern and venting channels. The entire length of the post space is replicated. This eliminates the need to fill the post space with wax and avoids breakage of the wax post/core build-up during removal.
The ParaPost XP Casting System ensures clinical success with a predictable and precise fitting cast post and core that eliminates the need for adjustments and remakes.
| [email protected] | coltene.com 9
ParaPost XP Casting System Components
ParaPost XP Casting System
ParaPostX SystemStainless Steel Drills
ParaPostXPPlastic Impression Posts
ParaPostXPTitanium Temporary Posts
Secure retention of temporary crowns
Friction grip for snug placement, eliminating the need for temporary cement in the canal
Avoids time consuming removal of temporary cement from post space, preserving the diameter of preparation
Color-coded for quick and reliable identification
Precise, time-saving impressions
Impression of entire length of post space without undercuts
Color-coded for easy identification of post sizes
Depth-calibrated drills for precise channel depth measurement (7, 9, 11 mm from apical end)
Color-coded for quick and reliable identification
Non-end cutting for low perforation risk
Precisely matched to each post for optimal cement film thickness
| [email protected] | coltene.com 10
ParaCore
ParaCoreParaCore is a dual-cured, radiopaque glass-reinforced composite available in three shades — dentin, white and translucent. This integrated bond and cement system complements all COLTENE post systems for clinically sound, long-lasting post and core restorations.
1
2
34
0
ParaPost Fiber Post
ParaCore cement
Dentin
Source: internal data
1. Dr. B. Millar, Dr. S. Deb, King`s College London Dental Institute, Oct. 2008
Dye penetration comparison after thermal cycling1
Cementation without bonding application
Cementation with ParaBond
1
2
3
4
0
Optimal Handling PropertiesWith its creamy, smooth and non-slumping consistency, ParaCore is the ideal all-in-one material. Due to its thixotropic formulation, ParaCore is also eminently suitable for free-hand application. Due to its grindability, similar to natural dentin, there are no grooves or notches.
Superior SealingApplying ParaBond adhesive prior to cementation with ParaCore effectively seals and protects the restoration against marginal microleakage and minimizes the risk of postoperative complications. An independent in-vitro study1 compared the amount of microleakage present following cementation of all-ceramic crowns using different composite luting cements. Cross-sectioned human molars demonstrated significant differences in the amount of dye penetration (marginal microleakage) after thermal cycling.
No leakageLeakage from crown margin reaching axial wallLeakage on axial wall, but not occlusal surfaceLeakage as far as occlusal surfaceLeakage to mid point of occlusal surface
Optimal Bond InterfaceApplying ParaBond inside the root canal before post cementation creates an optimal dentin-cement-post bond interface to enhance retention of the post inside the root canal.
| [email protected] | coltene.com 11
0.0 1.0 2.0 3.0 4.0 5.0 6.0
0 25 50 75 100 125 150
0 50 100 150 200 250 300 350
The Mann-Whitney non-parametric test showed ParaCore with statistically significant better scores (e.g. less dye leakage) than: seT (P < 0.001) Maxcem Elite (P = 0.002) But not statistically significant for: SmartCem2 (P = 0.170) RelyX Unicem (P = 0.170)
ParaCore 5 ml
RelyX Unicem*
SmartCem2*
Maxcem Elite*
seT*
Comparison of Color Penetration1
ParaCore 25 ml
ParaCore 5 ml
Luxacore 2*
Core Paste XP*
Flexural Strength
Core Paste XP*
Compressive Strength
Source: internal dataMPa
Source: internal data MPa
ParaCore 25 ml
ParaCore 5 ml
Luxacore 2*
* Not a registered trademark of Coltène/Whaledent
CompositionMethacrylatesDental GlassAmorphous Silicic Acid
Technical DataComplies with ISO 4049Shrinkage 3.5%Layer Thickness 5 ml | 25 ml 15 µm Water Absorption 5 ml | 25 ml 18 | 16 µg/mm³Solubility in water 5 ml | 25 ml 0.7 | 0.6 µg/mm³
Storage
Shade / Set Times
Dentin Slow
Transparent Slow
Working time73°F ................ ≤160s98.6°F ............ ≤60s
Curing time (not including working time)98.6°F ............ >200s
Working time73°F ............... ≤80s98.6°F ........... ≤30s
Curing time (not including working time)98.6°F .......... <120s
Dentin
White
| [email protected] | coltene.com 12
ParaCore
ParaCore Clinical Applications
Clinical photos: Ass. Prof. Dr. med. dent. Stefan J. Paul
Application of the chemical cured ParaBond adhesive into the post space preparation of the root canal and onto the contact surfaces.
Application of ParaCore directly into the root canal using the root canal tip.
Cementation of the ParaPost Fiber Lux Post into the root canal.
Removal of excess ParaCore.
Post cementation 5 ml
25 ml
ParaCore simplifies the post and core restorative technique with its ability to be used as a 3-in-1 material for post cementation, core build-ups and crown & bridge cementation. ParaCore can also be used to cement inlays and onlays.
Using one material for cementation and core build-ups provides an optimal “monoblock bond interface” between the dentin-post-crown, resulting in one cohesive restoration with outstanding durability and strength.
Mono-block restorationPost cementing Core build-up Cementing of crowns, bridges, inlays and onlays
5 ml
25 ml
5 ml
25 ml
5 ml
| [email protected] | coltene.com 13
Freehand core build-up using ParaCore.
Manual contouring of the core build-up. Crown preparation using different types of Alpen® diamonds.
Completed crown preparation.
Core build-ups
Cementing of crowns, bridges, inlays and onlays
5 ml
25 ml
5 ml
Application of the chemical cured ParaBond Adhesive onto the crown preparation.
Application of ParaCore directly into the all ceramic crown restoration.
Cementation of the final crown with excess ParaCore material being removed afterwards.
Postoperative clinical situation.
“The ParaCore material matches closely in shade to dentin and is very strong. It also saves time when used as a cement and core build-up material. The use of an adhesive component insures a predictable bond to tooth structure. “Dr. James Braun
| [email protected] | coltene.com 14
Order InformationParaPost XH
Introductory Kit P880 3 ø 0.90 mm Brown 4 pcs 4 ø 1.00 mm Yellow 5 pcs 4.5 ø 1.14 mm Blue 5 pcs 5 ø 1.25 mm Red 5 pcs 5.5 ø 1.40 mm Purple 2 pcs 6 ø 1.50 mm Black 2 pcs 7 ø 1.75 mm Green 2 pcs ParaPost Drills (one of each size) 7 pcs Universal Hand Driver L590 1 pc
Titanium Alloy Posts Refill 10 pcs 25 pcs3 ø 0.90 mm Brown P883 P883B 4 ø 1.00 mm Yellow P884 P884B 4.5 ø 1.14 mm Blue P8845 P8845B 5 ø 1.25 mm Red P885 P885B 5.5 ø 1.40 mm Purple P8855 P8855B 6 ø 1.50 mm Black P886 P886B 7 ø 1.75 mm Green P887 P887B
ParaPost Drills Refill Two-Fluted 3 pcs 3 ø 0.90 mm Brown P423 4 ø 1.00 mm Yellow P424 4.5 ø 1.14 mm Blue P4245 5 ø 1.25 mm Red P425 5.5 ø 1.40 mm Purple P4255 6 ø 1.50 mm Black P426 7 ø 1.75 mm Green P427 Assorted 3–6 (one of each size) 6 pcs P42A
ParaPost XP
Introductory Kit Stainless Steel Posts P780Introductory Kit Titanium Alloy Posts P780T 3 ø 0.90 mm Brown 4 pcs 4 ø 1.00 mm Yellow 5 pcs 4.5 ø 1.14 mm Blue 5 pcs 5 ø 1.25 mm Red 5 pcs 5.5 ø 1.40 mm Purple 2 pcs 6 ø 1.50 mm Black 2 pcs 7 ø 1.75 mm Green 2 pcs ParaPost Drills (one of each size) 7 pcs Universal Hand Driver L590 1 pc
Stainless Steel Posts Refill 10 pcs 25 pcs3 ø 0.90 mm Brown P7443 P7443B 4 ø 1.00 mm Yellow P7444 P7444B 4.5 ø 1.14 mm Blue P74445 P74445B 5 ø 1.25 mm Red P7445 P7445B 5.5 ø 1.40 mm Purple P74455 6 ø 1.50 mm Black P7446 7 ø 1.75 mm Green P7447 P7447B
Titanium Alloy Posts Refill 10pcs 25 pcs3 ø 0.90 mm Brown P7843 P7843B 4 ø 1.00 mm Yellow P7844 P7844B 4.5 ø 1.14 mm Blue P78445 P78445B 5 ø 1.25 mm Red P7845 P7845B 5.5 ø 1.40 mm Purple P78455 6 ø 1.50 mm Black P7846 P7846B 7 ø 1.75 mm Green P7847
ParaPost Drills Refill Two-Fluted 3 pcs 3 ø 0.90 mm Brown P423 4 ø 1.00 mm Yellow P424 4.5 ø 1.14 mm Blue P4245 5 ø 1.25 mm Red P425 5.5 ø 1.40 mm Purple P4255 6 ø 1.50 mm Black P426 7 ø 1.75 mm Green P427 Assorted 3–6 (one of each size) 6 pcs P42A
ParaPost Fiber Lux
Introductory Kit PF170 3 ø 0.90 mm Brown 2 pcs 4 ø 1.00 mm Yellow 3 pcs 4.5 ø 1.14 mm Blue 3 pcs 5 ø 1.25 mm Red 3 pcs 5.5 ø 1.40 mm Purple 2 pcs 6 ø 1.50 mm Black 2 pcs Universal Hand Driver L590 1 pc ParaPost Drills (one of each size) 6 pcs
Fiber Lux Posts Refill 5 pcs3 ø 0.90 mm Brown PF1713 4 ø 1.00 mm Yellow PF1714 4.5 ø 1.14 mm Blue PF17145 5 ø 1.25 mm Red PF1715 5.5 ø 1.40 mm Purple PF17155 6 ø 1.50 mm Black PF1716
ParaPost Drills Refill Two-Fluted 3 pcs 3 ø 0.90 mm Brown P423 4 ø 1.00 mm Yellow P424 4.5 ø 1.14 mm Blue P4245 5 ø 1.25 mm Red P425 5.5 ø 1.40 mm Purple P4255 6 ø 1.50 mm Black P426 7 ø 1.75 mm Green P427 Assorted 3–6 (one of each size) 6 pcs P42A
Starter Drill and Universal Hand Driverfor Fiber Post Removal TEDC1Includes: Starter Drill 1 pcUniversal Hand Driver L590 1 pc
| [email protected] | coltene.com 15
ParaPost Taper Lux
Introductory Kit PF180 4.5 ø 1.14 mm Blue 5 pcs 5 ø 1.25 mm Red 5 pcs 5.5 ø 1.40 mm Purple 3 pcs 6 ø 1.50 mm Black 2 pcs Universal Hand Driver L590 1 pc Taper Lux Drills (one of each size) 4 pcs
Taper Lux Posts Refill 5 pcs4.5 ø 1.14 mm Blue PF18145 5 ø 1.25 mm Red PF1815 5.5 ø 1.40 mm Purple PF18155 6 ø 1.50 mm Black PF1816
Taper Lux Drills Refill 3 pcs4.5 ø 1.14 mm Blue P8245 5 ø 1.25 mm Red P825 5.5 ø 1.40 mm Purple P8255 6 ø 1.50 mm Black P826 One each size 4.5 - 6 (4 pcs) P82A
Starter Drill and Universal Hand Driverfor Fiber Post Removal TEDC1Includes: Starter Drill 1 pcUniversal Hand Driver 1 pc
Order InformationParaPost XT
Introductory Kit P680T 3 ø 0.90 mm Brown 3 pcs 4 ø 1.00 mm Yellow 5 pcs 4.5 ø 1.14 mm Blue 5 pcs 5 ø 1.25 mm Red 5 pcs 5.5 ø 1.40 mm Purple 4 pcs 6 ø 1.50 mm Black 3 pcs ParaPost® XT Drills (one of each size) 6 pcs Universal Hand Driver 1 pc Metal Wrench A for size 3, 4, 4.5 1 pc Metal Wrench B for size 5, 5.5, 6 1 pc
Metal WrenchesWrench A for sizes 3, 4, 4.5 1 pc L594 Wrench B for sizes 5, 5.5, 6 1 pc L595 Wrench A+B 2 pcs L596Universal Hand Driver 1pc L590
Titanium Alloy Posts Refill 10 pcs 30 pcs3 ø 0.90 mm Brown P6830 P6830B 4 ø 1.00 mm Yellow P6840 P6840B 4.5 ø 1.14 mm Blue P6845 P6845B 5 ø 1.25 mm Red P6850 P6850B 5.5 ø 1.40 mm Purple P6855 P6855B 6 ø 1.50 mm Black P6860 P6860B
ParaPost XT Drills Refill Three-Fluted 3 pcs3 ø 0.90 mm Brown P6230 4 ø 1.00 mm Yellow P6240 4.5 ø 1.14 mm Blue P6245 5 ø 1.25 mm Red P6250 5.5 ø 1.40 mm Purple P6255 6 ø 1.50 mm Black P6260 Assorted 3–6 (one of each size) P682A
ParaPost XP Casting System*
Introductory Kit - 25 pcs P781Impression Posts (Size 3–7) Temporary Posts (Size 3–7) Burnout Posts (Size 3–7) ParaPost XP Drills (one of each size) 7 pcs
Plastic Impression Posts Refill 20 pcs3 ø 0.90 mm Brown P7433 4 ø 1.00 mm Yellow P7434 4.5 ø 1.14 mm Blue P74345 5 ø 1.25 mm Red P7435 5.5 ø 1.40 mm Purple P74355 6 ø 1.50 mm Black P7436 7 ø 1.75 mm Green P7437
Titanium Temporary Posts Refill 20 pcs3 ø 0.90 mm Brown P7463 4 ø 1.00 mm Yellow P7464 4.5 ø 1.14 mm Blue P74645 5 ø 1.25 mm Red P7465 5.5 ø 1.40 mm Purple P74655 6 ø 1.50 mm Black P7466 7 ø 1.75 mm Green P7467
Plastic Lab Burnout Posts Refill 10 pcs / 25 pcs3 ø 0.90 mm Brown P7513 / P7513B 4 ø 1.00 mm Yellow P7514 / P7514B 4.5 ø 1.14 mm Blue P75145 / P75145B 5 ø 1.25 mm Red P7515 / P7515B 5.5 ø 1.40 mm Purple P75155 / P75155B 6 ø 1.50 mm Black P7516 / P7516B 7 ø 1.75 mm Green P7517 / P7517B
ParaPost Drills Refill Two-Fluted 3 pcs 3 ø 0.90 mm Brown P423 4 ø 1.00 mm Yellow P424 4.5 ø 1.14 mm Blue P4245 5 ø 1.25 mm Red P425 5.5 ø 1.40 mm Purple P4255 6 ø 1.50 mm Black P426 7 ø 1.75 mm Green P427 Assorted 3–6 (one of each size) 6 pcs P42A
*ParaPost XP casting system is only available in the United States.
www.coltene.com
Coltène/Whaledent Inc.235 Ascot ParkwayCuyahoga Falls, OH 44223 / USATel. USA & Canada +1 800 221 3046 +1 330 916 8800Fax +1 330 645 [email protected]
Coltène/Whaledent AGFeldwiesenstrasse 209450 Altstätten / SwitzerlandTel. +41 (0)71 757 53 00Fax +41 (0)71 757 53 [email protected]
Coltène/Whaledent GmbH + Co. KGRaiffeissenstrasse 3089129 Langenau / GermanyTel. +49 (0)7345 805 0Fax +49 (0)7345 805 [email protected] 31
473A
• 3.
17
ParaCore
5 ml Intro Kit 5885 Syringe White 5 ml 1 pc Syringe Dentin 5 ml 1 pc Syringe Dentin SLOW 5 ml 1 pc Syringe Trans SLOW 5 ml 1 pc ParaBond A & B non-rinse 3 ml 3 pcs Mixing Tip Brown short super fine 20 pcs
SLOW 5 ml Intro Kit 6001 3753 Syringe Dentin SLOW 5 ml 2 pc Syringe Trans SLOW 5 ml 2 pc ParaBond A & B non-rinse 3 ml 3 pcs Mixing Tip Brown short super fine 20 pcs
5 ml Syringe Refills 2 x 5ml5 ml White Syringe Refill 5886 5 ml Dentin Syringe Refill 5887 5 ml Dentin SLOW Syringe Refill 6001 1391
5 ml Trans SLOW Syringe Refill 6001 1392Each 5 ml Refill Includes: Mixing Tip Brown Short Super Fine 20 pcs
5 ml AccessoriesMixing Tip Brown Short Super Fine 40 pcs 6747Mixing Tip Brown Short Fine 40 pcs 6759
Order Information
ParaForm
Complete Kit 50 pcs (5 of each ParaForm) P5860
ParaCore
25 ml Dentin Intro Kit 1500 Cartridge Dentin 1 pcIncludes: ParaBond A & B non-rinse 3 ml 3 pcs Mixing Tip/Yellow Oral Tips 20 pcs
25 ml White Intro Kit 1502 Cartridge White 1 pcIncludes: ParaBond A & B non-rinse 3 ml 3 pcs Mixing Tip/Yellow Oral Tips 20 pcs
25 ml Cartridge Refills 1 pc25 ml Single Dentin Cartridge 585325 ml Single White Cartridge 5854Each 25 ml Refill Includes: Mixing Tip/Yellow Oral Tips 20 pcs
25 ml AccessoriesMixing Tip/Yellow Oral Tips 100 pcs 6555Universal Mixing Tips 40 pcs 60019663 COLTENE Dispenser 25 ml 1 pc 4470