Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
MORE THAN 110 YEARS OF EXPERIENCE IN THEMANUFACTURING OF CHAIN
www.marit.frOUR FLEXIBILITY HAS ALWAYS BEEN OUR STRENGTH
Anchor chain, chain fittings and anchors for Navies,
Military Shipyards, or Ministries of Defence, made
in High Resistance (HR) grade, non-magnetic steel or stainless steel used on
Aircraft Carriers, Warships, Frigates, Corvettes,
Destroyers, Battleships Mine Sweepers or Minehunters.
MILITARYAPPLICATIONS
MARINE APPLICATIONS
Mooring chain, anchor chain, fittings and
accessories in grade U2 & U3 for commercial cargo
or Passenger Vessels such as Cruise Liners, container
Ships, Ferries, Tankers, Carriers, Barges, as well as for any other marine
or maritime or application such as Aquaculture.
Supplying to Shipyards, Operators and Contractors.
Buoy mooring chain made of bridle chain, pendant and ground chain with anchors or sinkers for Lighthouses, maritime, Coast Guards or coastal Administrations,
Maritime Safety Authorities, marine aids to navigation
systems, Directorates of Navigation, and also
for buoys & beacons manufacturers.
LIGHTHOUSES ADMINISTRATIONS
Fender chain made of stud link chain or open link chain,
used on fenders for ship-to-quay operations for the
berthing of large vessels on Harbour Quays, Docks Piers, Pontoons, Wharves and on
any other marine vessel port entrance. Also used
on fenders for ship-to-ship operations.
PORTAPPLICATIONS
Mooring & anchor chain, chafe chains, fittings, Drag Embedment Anchors and
Mooring Bridle assembly for Offshore Mooring, Drilling
and Subsea applications, in grade R3, R3S, R4 and R4S, used on Hawsers for Single
Point Moorings (SPMs), on CALM Buoys, Semi-Sub
Rigs, FPSO, FSO, FPU, SPAR, Mid Water Arches (MWAs).
OFFSHORE APPLICATIONS
Mooring & anchor chain, chain fittings and anchors for the Marine Renewable Energy (MRE) like Floating
Offshore Wind Turbines (FOWT), Floating wind
testing devices or buoys, Floating wave power
stations or generators, Floating tidal energy Platforms (turbines,
converters or plants).
High Quality chain made of galvanised steel or stainless steel, including chain fittings
and anchors, tailored or customised to the customer requirements, and used for Yachting, Leisure marine,
or Luxury Boats, berthed in Marinas, or distributed by Yachts or Ship Chandlers.
RENEWABLE ENERGY
YACHTING APPLICATIONS
Coupling To Chain Locker
Cast Steel Mooring Sinkers
Chain Tensioner
Dog Bone Shackle
Long Link Chain
Short Link Chain
Elongated Closed Swivel
Closed Swivel
Pneumatic Fender
Cell Fender
Kenter Anchor Shackle
Danforth Anchor
AC-14 anchor
Shackles (Bow or D Type)
Swivel Forerunner
Kenter Shackle
Studlink Chain
Shackle (Bolt or Screw Pin)
Plough Anchor
Yacht AnchorStainless Steel
ShackleStainless Steel Studlink Chain
Yachting Deck Equipment
Stainless Steel Swivel
Anchor Chain Sailing
Pear Shaped Link
Triplate Quadplate Oblong Plate
Drag Embedment Anchor
Flipper Delta Anchor
H-LinkMooring Bridle
Assembly
C-Link
Central Triangular Plate
Danforth AnchorStudless
Chain
www.marit.fr
230, avenue Désandrouins 59300 Valenciennes - FRANCE
+33 3 27 19 32 70 +33 3 27 19 32 71
NOTRE FLEXIBILITÉ A TOUJOURS FAIT NOTRE FORCEwww.marit.fr
FRANCE541 Orchard Road, #09-01 Liat Towers, SINGAPORE
+65 6933 1350 +65 6933 1398
OUR FLEXIBILITY HAS ALWAYS BEEN OUR STRENGTHwww.marit.fr
SINGAPORE
Headquarters & Factory (FR)
Representative Office Asia-Pacific (SG)