CONNECTOR PRODUCT OVERVIEW FOR ADVANCED INTERCONNECTS

2 www.molex.com

MOLEX SOLUTIONSALWAYS AHEAD OF THE CURVE

Molex is a leading global supplier of innovative interconnect solutions. To meet the needs of customers all over the world, we have developed one of the industry’s largest product portfolios, including over 100,000 connectors, interface solutions, application tooling and more.

3www.molex.com

Connector Product Overviewfor advanced interconnects

Molex innovative portfolio is always growing. Every

year, we design and manufacture solutions that set

new standards and drive innovation in a wide array

of markets – from telecom and computer networking,

to transportation and consumer goods, to medical

and lighting. We’re committed to looking ahead and

anticipating the needs of our customers.

Innovation through intensive research

With our state-of-the-art product design centers, Molex

has made a serious commitment to research and

development. All of our products are designed to meet

the demands of next-generation applications and are

based on a deep understanding of industry trends.

At Molex, we use the latest systems and technology,

including advanced Computer Aided Engineering

software and predictive engineering tools. It’s all part

of our focus on delivering tomorrow’s technologies,

today.

A strong commitment to sustainability

We believe the global environment is an important

issue for everyone. That’s why we not only adhere

to all environmental regulations, but also insist on

ecofriendly and safety-focused business practices.

4 www.molex.com

EdgeLine® Mezzanine Connectors

Micro-Fit 3.0™ Power Products

Mini-Fit® Power Products

SL™ (Stackable Linear) Modular Connectors

KK® Power and Signal Connectors

Mini-Fit Sr.™ Power Products

ConnectorOverview

5 www.molex.com

MLX™ Power Connectors

Mezzanine Products

EXTreme Power™ Products

SlimStack™Products

Power Products

Consumer I/O Products

ConnectorOverview

6www.molex.com

Backplane Board-to-Board Products

Orthogonal Backplane Products

Modular Jacks and Plugs

Microminiature Wire-to-Board Connectors

FFC/FPC Products

RF Products

ConnectorOverview

7www.molex.com

Memory Card Products

High-Speed I/O Connectors

Standard Antennas

DDR3 and DDR4 DIMM Sockets

iPass+™ HD Interconnects

zQSFP+™ Interconnect Solutions

ConnectorOverview

8 www.molex.com

NEW PRODUCT INTRODUCTIONS

9www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

The Micro-Lock™ 1.25mm Wire-to-Board System is available in straight- and right-angle styles for both single and dual rows with a maximum current rating of 1.5A. The damage-proof pin protection feature prevents header pins from being bent or crushed while the wide mating latch with two-point positive lock provides secure mating retention.

1.25mm 1.5A2-16

16-40

•Automotive•Consumer•Data/Communications

A dual contact, right angled non ZIF FPC/FFC connector with a mated height of only 1.00mm and a width of only 2.55mm. The dual contact feature allows the same connector to be used on parallel boards simplifying design and sourcing. The staggered contact design allows for easier soldering and lower cable insertion forces.

0.30mm 0.3A11, 13, 17, 19

•Consumer•Medical

Idealfortightpackagingconstraints,low-profileSolderRight™ Direct-Solder Terminals enable right-angle connections onto a PCB. Available in multiple terminal / wire size ranges (14 to 28 AWG) and also in a straddle mount version, this product provides an extremely low cost way of connecting wires to a PCB with a very low ‘z’ axis height.

N/A14.0A max.

1

•Automotive•Consumer•Industrial•Medical•Telecom/Networking

Eliminating the need for mating headers, EdgeMate™ Power Connectors offer positive PCB-locking and significantcostsavingsforwire-to-edge-cardterminations. Added electrical reliability is achieved with the crimp terminal known for its cantilever beam and dual-contact-point design for high normal-force and current-carrying capacity.

3.96mm 7.0A 2-12•Consumer•Industrial•Lighting

Achieve exceptionally reliable, convenient wireterminationswithfixed-mount,push-buttonEurostyle™Terminal Blocks, ideal for a variety of industries and applications. Available in 2.50 to 10.00mm pitch and from 2 to 24 circuits in vertical, horizontal and 45° angle orientations. Modular construction also offers ultimate designflexibility.

2.50mm – 10.00mm

10.0Amax.

2-24

•Industrial•Lighting•Consumer•Networking•Security

Simplify the LED installation process with SlimRay™ pre-wired COB LED array holders. Including LED pre-hold featuresalongwithalow-profiledesign,theseproductsare ideal for use with Lumileds LUXEON* and similar next-generation COB arrays. The holders also feature a screw-mount attachment method for securing the array to a heat sink.

*LUXEON is a registered trademark of Lumileds

N/A N/A N/A •Lighting

The Pico-Lock™ 1.00mm Pitch Wire-to-Board System offers a mated height of just 1.50mm combined with a current carrying capacity of 1.5A per contact. Secure mating is achieved by side positive locks. Wide, robust fittingnailsfacilitateincreasedboardretention.Headersand housings are polarised to prevent mismating.

1.00mm 1.5A 2-12

•Automotive•Consumer•Lighting•Industrial•Telecoms

Miniature and mechanically resilient Compression Connectors provide excellent electrical contact for reliable operations in ultra-slim mobile devices. Featuringlowlevelcontactresistance,low-profileheights and high terminal retention forces. These connectors also save PCB real estate due to their small PCB footprints.

Various 1.0A 4, 6, 8•Consumer•Medical

Micro-Lock™ 1.25mm

Eurostyle™Terminal Blocks

0.30mm FPC Connector

SlimRay™ LED Array Holders

SolderRight™ Direct-Solder Terminals

Pico-Lock™ 1.00mm

EdgeMate™ Power Connectors

Compression Connectors

New Product Introductions

10 www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Delivering high density and excellent frequency performance, SMPM RF Blind-Mate and SMP Connectors reduce system weight and increase manufacturability withmultipleportconfigurationoptions.WorkingoverafrequencyrangefromDCto65GHztheseconnectorsare 30% smaller than existing SMP families.

N/A N/A N/A

•Aerospace and Defence•Telecom•Medical•Networking

The Impel™ Backplane Connector system will handle data rates scalable from 25 to 40 Gbps. Multiple pitch options include 1.90mm pitch broad-edge-coupled; 2.35mm pitch orthogonal; 3.00mmpitch quad-route. Two compliant-pin attach optionsand 18 to 72 differential pairs per orthogonal node are available.

N/A N/A N/A

•Data Communications•Telecom•Aerospace and

Defence

Idealfortight-packagingapplications,fine-pitchSlimStack™ SSB6 Board-to-Board Connectors offermaximum space savings, mating guidance, andsecure electrical and mechanical contact for all typesof mobile devices. With a stacking height of 0.60mm and a width of 2.00mm these connectors also come with a dual contact design.

0.35mm 0.3A 10-50•Consumer•Medical•Mobile Devices

Ideal for tight-packaging applications, the ultra-compact FPCconnectorsoffersimplifiedcableassemblyandretention to meet the design needs of mobile device manufacturers. Available in either 0.95mm or 0.75mm heights these series offer a BackFlip™ actuator and dual contacts all packaged in a low halogen material housing.

0.30mm 0.2A 7-61•Consumer•Medical•Mobile Devices

Halvingthetoolingandoperationalcostsofplug-and-receptacle power systems, Ditto™ Wire-to-Wire Interconnects and pre-assembled harnesses increase cost-savingsandoperationalefficiencyoflow-amperageconsumer and lighting applications. This hermaphroditic connector system features polarised housings with friction locks.

2.50mm8.0A max.

2-8•Consumer•Lighting

SlimStack Armor™ 0.35mm Pitch Connectors deliver up to 3.0A of extra power through protective metal covers, and provide superior mating guidance and electrical contact assurance for mobile device and other tight-packaging applications. Featuring a stack height of just 0.60mm, tactile and audible mating feedback and a dual contact design.

0.35mm3.0A max.

6-48•Consumer•Medical•Mobile Devices

The rugged ML-XT™ Connection System with market-leading high-performance seal technology is a cost-competitive solution offering superior reliability for critical vehicle-wiring applications in harsh environments. Advanced two-shot LSR molded one-pieceplugandplugseal,plusrearHCRsealswithcoverguards guarantee optimum seal positioning at all times.

N/A 13.0A 2-18•Automotive•Commercial Vehicle•Industrial

Block-Style SIM Card Connectors are available in a wide rangeofprofileheightsandareallofferedinahalogenfree material. Other features include high-contact normal forces and gold-plated rounded geometry contacts. N/A 0.5A 6 & 8

•Consumer•Medical•Mobile Devices

SMPM Blind-Mate and SMP RF Connectors

Ditto™ Wire-to-Wire Interconnects

Impel™ Backplane Connectors

SlimStack Armor™ 0.30mm Pitch Connectors

SlimStack™ SSB6 Board-to-Board Connectors

ML-XT™ Sealed Connection System

0.30mm FPC Dual Contact, BackFlip™

Block-Style SIM Card Connectors

New Product Introductions

11www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Achieve up to 6.0A of power and electrical reliability inanultra-compactdesignwithSlimStack™HybridPower Connectors designed for battery and other power applications in mobile devices. Featuring a stack height of just 0.75mm and dual-contact design for both signal and power contacts which ensures a reliable electrical and mechanical connection.

0.40mm6.0A Power0.3A Signal

8•Consumer•Medical•Mobile Devices

Designed for large-scale data-center storage systems, industry-leadingiPass+™HDInterconnectssupportSAS3.0 signaling up to 100m with low power consumption, while reducing cable-management challenges. Featuring afullyintegratedpress-fitreceptacledesignavailablein1-by-1,1-by-2and1-by-4configurations.

N/A 0.5A 1, 2, 4•Data Communications•Telecom•Networking

The sleek TermiMate™ Wire-to-Board and Board-to-Board Connector System minimizes shadowing in LED lighting applications while providing space-savings and reduced component costs. This single-circuit system islowprofileandcompactinsize.Itfeaturesasecurefriction lock and its unique shaped terminals provide a floatingmatingtolerance.

N/A 3.0A 1•Consumer•Lighting

Molex’s 0.50mm Pitch FFC/FPC Connectors with double the contacts per circuit offer the best combination of signal reliability, compactness, wide circuit size range and cable style choices of any similar version in the market. These zero insertion force (ZIF) connectors also include a cable ear-tab locking feature.

0.50mm 0.5A 20-80•Consumer•Medical•Mobile Devices

High-Durability-ClassUSB3.0CableAssembliesproviderobust connectivity to support high speed computing, consumer and automotive applications. Available in standard lengths of 1.0m, 1.5m and 2.0m these assemblies are rated for up to 5,000 mating cycles. All cable assemblies are available in halogen-free versions.

N/A N/A N/A•Consumer•Medical•Mobile Devices

Highdurabilityspringclipsoffermobiledevicemakersmaximum cost savings with superb interconnect performance over a wide working range. Other features include anti-snag design, narrow clip widths, high durability (1,500 cycles) and device to PCB grounding contact.

N/A1.5A max.

1

•Consumer•Telecom•Security•Industrial

High-densityUltra-Fit™PowerConnectorsofferlowmating forces, eliminate same-circuit-size cross mating, optimize space savings and reduce terminal back-out.This feature packed system offers single- and dual row wire-to-board options with vertical- and right angle headers. The positive locking housings are also available with TPA retainers.

3.50mm14.0A max.

2-16

•Consumer•HomeAppliance•Telecom•Transportation•Industrial•Medical

Leveraging full keying and color-pairing features,foolproof CP-6.5 Wire-to-Board Connectors enhanceuser-safety while speeding up consumer and industrialinterconnect assembly applications. Features include positive locking, terminal position assurance (TPA) clips and kinked solder tails for pre solder board retention. The headers are 260° wave solder compliant.

6.50mm10.0A max.

2-6•Consumer•HomeAppliance•Industrial

SlimStack™ Hybrid Power Connectors

USB 3.0 Cable Assemblies

iPass+™ HD Interconnects

Spring Clips for Mobile Devices

TermiMate™ Connector System

Ultra-Fit™ Power Connectors

0.50mm Pitch FFC Connectors

CP-6.5 Wire-to-Board Connector System

New Product Introductions

12 www.molex.com

molex.comprovidesafirststopforcomprehensive overviews of our industrial products. Some of the tools you'llfindare:

Capabilities VideosShort online videos highlight key industry products, as well as our unique cross-functional design and manufacturing capabilities.

Featured ProductsTofindoutaboutnewproductsthatcan take your design to the next level, look no further than this convenient product spotlight.

Other Time-Saving Site Features

Monthly E-nouncementsElectronic newsletter keeps you up-to-date on our latest innovations

Favorite Products Feature Let you select and save up to 200 products as you browse

New Videos, Webinars, Articles and MoreAvailable right from our home page

Detailed Application Pages

Instant Access to Product Specs

For the most in-depth and up-to-date information on all our products, visit molex.com. It’s designed to help you get more done in less time withadvancedsearchcapabilities,3Dmodels,productspecifications,easy sample ordering and more.

Find the Latest Innovations and Information at molex.com

13www.molex.com

Wire-To-Board .................................................................................................................................14 Wire-To-Board Microminiature ...................................................................................................................................14 Wire-To-Board Signal .................................................................................................................................................16 Wire-To-Board Power .................................................................................................................................................18 Wire-To-Board Ribbon Cable / Wire Trap ...................................................................................................................19 Wire-To-Board Storage ..............................................................................................................................................19

Wire-to-Wire ..................................................................................................................................20 Wire-to-Wire Power ...................................................................................................................................................20 Wire-to-Wire Signal ...................................................................................................................................................21

Board-to-Board ..............................................................................................................................22 Board-to-BoardHighSpeed ......................................................................................................................................22 Board-to-Board Microminiature ................................................................................................................................23 Board-to-Board Power ..............................................................................................................................................24 Board-to-Board Signal ..............................................................................................................................................25 Board-to-Board Storage ............................................................................................................................................26

Power up to 5A ...............................................................................................................................26

Power up to 20A .............................................................................................................................27.

Power up to 21A+...........................................................................................................................28.

I/O Connectors ...............................................................................................................................30 I/O Connectors Consumer/PC ...................................................................................................................................30 I/O Connectors Networking/Telecommunications .....................................................................................................31 I/O Connectors Mobile Products ...............................................................................................................................32 I/O Connectors Industrial Products ...........................................................................................................................34

Backplane ......................................................................................................................................34 BackplaneConnectorsHighSpeed ..........................................................................................................................34 Backplane Connectors Cable Assemblies.................................................................................................................35

FFC/FPC .........................................................................................................................................36

Modular Jacks .................................................................................................................................40

Solderless Terminals .......................................................................................................................41

Terminal Blocks ..............................................................................................................................42

RF Products ...................................................................................................................................43

Sealed Connectors..........................................................................................................................44

Memory Module Sockets .................................................................................................................46

Memory Card Sockets .....................................................................................................................47.

Standard Antennas .........................................................................................................................48.

Solid State Lighting ........................................................................................................................49.

Switch Products .............................................................................................................................50

Custom Solutions / Application Tooling ............................................................................................51

TABLE OF CONTENTS

14 www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Flexible, high-performance microminiature IDT coaxial connectors feature a double-clamp wire grounding method that provides both electrical and mechanical grounding. This method offers a more reliable termination than hand-soldering and up to 60% less transmission(dB)lossatfrequenciesbetween1-3MHz.

0.40mm N/A 30-50 •Consumer

Pico-Clasp™ is a compact wire-to-board system, offered in both single and dual-row versions. Friction and (inner and outer) positive locks are offered for various application needs. Other features include mating guides, solder tabs and footprint compatibility with some competitive versions.

1.00mm 1.0A 2-15

20-50•Consumer

Pico-EZmate™connectorsarecompactandlow-profile;ideal for miniature, tight packaging, wire-to-board applications. Locking features and vertical mating between the receptacle housing and header enables secure and easy placement in tight spaces. 1.20mm 1.5A 2-6

•Transportation•Consumer•Mobile Devices

PanelMate™offersthelowestprofileofanyfully-shrouded wire-to-board system from Molex. The series features an SMT header with robust solder tabs and solder-conducingSMTfillettaildesignforsecurePCBretention. The housing includes a friction lock for secure mating and housing lance for safe and secure terminal retention.

1.25mm 1.0A2-30

12-14 15-20

•Transportation•Consumer•Medical•Mobile Devices

PicoBlade™ is offered in wire-to-board and wire-to-wire options, single row, with both SMT and through-hole headers. The system saves about 45% of PCB space versus typical 2.00mm wire-to-board systems whilst providing the same amperes of current. (Semi-) automatic and manual tooling is available to support crimp harness assembly.

1.25mm 1.0A 2-15

•Transportation•Consumer•Industrial Automation•Medical

Mini Mi II™ is a compact multi-harness system available in both wire-to-board and wire-to-wire options. Custom lengthsandwireconfigurations,single/dualrowandSMT/ through-hole styles available. Other features includeAPQPcertified,internalpositivelockforsecure retention, and IDT housings for cost effective termination.

1.25mm 1.0A 2-40•Transportation•Consumer•Data/Communications

CLIK-Mate™ wire-to-board connectors are designed for applications that require higher pin-count connectors to carry more signal lines in less space. A tuning-fork terminal design provides low insertion force and a secure mating contact. Reinforced metal solder tabs ensure a secure PCB retention and solder joint strain relief.Note:*singlerow†dualrow.

1.25mm

1.50mm

2.00mm

1.0A

2.0A

3.0A

2-15

2-15* 16-34†

4-15

•Consumer

Duo-Clasp™ dual-row, SMT connectors offer secure positive lock-system for superior mating retention and gold plating for increased durability. The dual-lock design prevents the housing from being dislodged from the PCB connector in case the wires are pulled, thus ensuring high signal contact. Suitable for high volume pick-and-place production.

1.25mm 1.0A 20-40 •Consumer

Micro IDT Coaxial Connectors

PicoBlade™

Pico-Clasp™

Mini Mi II™

Pico-EZmate™

CLIK-Mate™

PanelMate™

Duo-Clasp™

Wire-To-Board Microminiature

15www.molex.com

Product Name Description Pitch Current Rating

Circuits Size Applications

The Pico-Spox™ system includes crimp terminal, receptacle housings and PCB headers. The box style terminal makes contact with the header pin via two inward-facing dimples ensuring high reliability. Vertical andright-angleheadersofferdesignflexibility.Frictionlock and polarising features provide secure retention and proper mating.

1.50mm 3.0A 2-15•Consumer•Data/Communications•Medical

The Pico-Lock™ 1.50mm pitch wire-to-board system offers a mated height of just 2.00mm combined with a current carrying capacity of 3.0A per contact. Secure mating is achieved by side positive locks and top friction locks. Increased board retention is helped by way of widerobustfittingnails.Headersandhousingsarepolarised to prevent mis-mating.

1.50mm 3.0A4, 6, 7, 8 and 10

•Automotive•Consumer•Solid State Lighting•Industrial•Telecoms

The Flexi-Mate™ connector system provides a full range of co-planar wire-to-board, board-to-board and terminator options for the lighting industry. Key features include a dual-contact terminal design for secure electrical contact and space-saving positive side locks. Guide features help facilitate mating and protect terminals.

3.70mm 2.0A 2 •Consumer

Pico-Spox™

Pico-Lock™

Flexi-Mate™

Wire-To-Board Microminiature

16 www.molex.com

Wire-To-Board Signal

Product Name Description Pitch CurrentRating

Circuits Size Applications

The Milli-Grid™ family saves up to 40% in PCB real estate over traditional 2.54mm pitch connectors. Suitable for wire-to-board, board-to-board and IDT cable-to board connections. Features include early entry (long wipe) terminals, center polarisation key and locking ramps, SMT and through-hole headers.

2.00mm 2.0A 4 -50

•Automotive•Consumer•Networking•Telecommunications

iGrid™ wire-to-board dual-row system comes with an anti-tangle internal positive lock providing space savings and secure mating retention, in a compact and robust design to withstand rugged handling and high vibration. Includes crimp terminals, receptacle housings and fully shrouded PCB headers in straight and right-angleconfigurations.

2.00mm 2.0A 10-40

•Automotive•Consumer•Industrial•Medical•Smart Phones and

Mobile Devices

DuraClik™ connectors meet various space constraints and harness installation needs due to the right-angle andverticalconfigurationoptions.Featuresincludewide solder tabs, positive inner-lock and an audible mating sound, footprint compatibility, dust and damage reppelent contact design and an open area for pick-and-place.

2.00mm 3.0A 2-12•Automotive•Commercial Vehicle•Industrial Automation

MicroClasp™ wire-to-board system includes a unique inner positive lock that provides latch protection, secure retention and an audible mating “click”. The terminal design offers low insertion and withdrawal forces. Single and dual-row crimp receptacles and PCB headers are availableinSMTandthrough-holeconfigurations.

2.00mm 3.0A 2-40•Consumer•Industrial•Medical

MicroBlade™ system offers a reliable box-type terminal that provides secure electrical contact, optional IDT receptacle and fully shrouded headers in straight, right-angle and bottom-entry versions. Features include a low-profilematedheightforspacesavings,user-friendlyfriction lock with housing windows and polarisation options to prevent mis-mating.

2.00mm 2.0A 2-15•Consumer•Data/Communications

Micro-Lock™ connectors feature a wide mating latch with two-point positive lock for secure mating retention. The system provides the optimal combination of pinprotection,lowprofileandlow-insertionforceenablingeasy mating and unmating. ‘Crash Free’ mating design protects housing terminals and header pins from damage.

2.00mm 3.0A 4-15•Consumer•Data/Communications

The Sherlock™ family consists of vertical and right-angle headers, crimp housings and reliable box-style terminals. Key features include a positive locking latch that withstands high vibration and permits unmating onlywhenactivated,alowmatedprofileforspacesaving, and polarised sidewalls that prevent mismating and provide mating guidance.

2.00mm 2.0A 2-20•Automotive•Consumer

Micro-Latch™ connectors ensure durable mating and protection of the electrical circuits due to a friction-lock mechanism where the noses on the latching receptacle housing slide into the header wall openings. Through-hole versions are available for both right-angle and surface-mount compatible vertical headers. Polarising features help prevent mis-mating.

2.00mm 2.0A 2-15•Automotive•Consumer

Milli-Grid™

MicroBlade™

iGrid™

Micro-Lock™

DuraClik™

Sherlock™

Micro-Clasp™

Micro-Latch™

17www.molex.com

Wire-To-Board Signal

Product Name Description Pitch Current Rating

Circuits Size Applications

Versatile wire-to-board and wire-to-wire system including terminals, crimp housings and fully-shrouded straight and right-angle headers available in tray and radial tape packaging. Features include a four-point contact design for electrical reliability, guide walls and pulltabsforeasymating/unmating,anti-fishhookingcontact for safe harness assembly.

2.50mm 3.0A 2-15•Consumer•Industrial

SPOX BMI™ (Blind-Mate Interface) connectors offer low-profile,dual-row,wire-to-wireandwire-to-boardsolutions. Self-aligning features and mated stack distance of only 11.00mm allow for secure use in both horizontal and vertical directions. Multiple pin counts permitdesignflexibilityandprovidesolutionsforbothpower and signal applications.

2.54mm 3.0A 6-16•Networking•Telecommunications

The SPOX™ family features Mini-SPOX™, including crimp and IDT housings, wire-to-wire and wire-to-board options, and Macro-SPOX™, including unshrouded and partially shrouded headers, along with board-to-board options. The “spring box“-shaped terminals provide multiple points of contact assuring excellent signal integrity.

2.50- 5.08mm

3.0-7.0A 2-16

•Transportation•Consumer•Data/Communications •Industrial Automation

The 3rd generation C-Grid III™ system offers unique design features including 3 different plating options - a termination technique supporting discrete wire and ribbon cable connectors, inter-mateability with Molex‘s QF-50 product line and full compatibility with DIN41651, HE-13/14standardconnectorsystems.

2.54mm 3.0A 2-130•Transportation•Consumer

SL™ (Stackable Linear) is a modular, single-row, wire-to-wireandwire-to-boardsystemincludingpress-fit(compliant-pin), through-hole and SMT PCB termination. Latching vertical/right-angle headers; discret wire, FFC and IDT crimp housings are available. SL™ intermates with CGrid® and KK® product families in same pitch to providedesignflexibilityandconfigurationoptions.

2.54mm 3.0A 2-25

•Transportation•Consumer•Data/Communications•Industrial Automation•Medical•Networking

A versatile single-row wire-to-board and board-to-board crimp contact system. Vertical and right-angle PCB headers with or without polarisation and friction locks. Right-angle top- and bottom-entry PCB connectors mate with standard headers to facilitate board-to-board configurations.

2.50mm/ 2.54mm

4.0A 2-28

•Transportation•Consumer•Data/Communications•Industrial Automation•Medical•Networking

Wire-to-Board

Connectors

Product Name Description PitchCurrent Rating

Circuits Size

Applications

2.50mm 3.0A 2-15

10.0mm(0.393”)

30.0A(PowerBlade)

2

10.0mm(0.393”)

30.0A(PowerBlade)

1

10.0mm(0.393”)

30.0A(PowerBlade)

1

10.0mm(0.393”)

30.0A(PowerBlade)

3

10.0mm(0.393”)

30.0A(PowerBlade)

3

10.0mm(0.393”)

30.0A(PowerBlade)

3

10.0mm(0.393”)

30.0A(PowerBlade)

3

Versatile wire-to-board and wire-to-wire system

including terminals, crimp housings and fully

shrouded straight and right-angle headers available

in tray and radial tape packaging. Features include:

four-point contact design for electrical reliability;

guide walls and pull tabs for easy mating/unmating;

anti-fishhooking contact for safe harness assembly. Mini-Lock

Product

Image

Duplicate

Spox BMI

Product

Image

Duplicate

Spox

Product

Image

Duplicate

C-Grid III

Product

Image

Duplicate

SL

Product

Image

Minctor endisqu aesequos sandanim lat ant qui vel

magnam qulaccus, solorep, blablablubbblubb,

tatemolorum rem, Aceaque, veni, vidi, vici, endisqu

aesequos sandanim lat ant qui vel magnam

qulaccus, lat ant qui vel magnam Aceaque, veni, vidi,

vici, endisqu aesequos sandanim lat ant qui vel

magnam qulaccus, XYZ product name

product name

Product

Image

Minctor endisqu aesequos sandanim lat ant qui vel

magnam qulaccus, solorep, blablablubbblubb,

tatemolorum rem, Aceaque, veni, vidi, vici, endisqu

aesequos sandanim lat ant qui vel magnam

qulaccus, lat ant qui vel magnam Aceaque, veni, vidi,

vici, endisqu aesequos sandanim lat ant qui vel

magnam qulaccus, XYZ product name

product name

Product

Image

Minctor endisqu aesequos sandanim lat ant qui vel

magnam qulaccus, solorep, blablablubbblubb,

tatemolorum rem, Aceaque, veni, vidi, vici, endisqu

aesequos sandanim lat ant qui vel magnam

qulaccus, lat ant qui vel magnam Aceaque, veni, vidi,

vici, endisqu aesequos sandanim lat ant qui vel

magnam qulaccus, XYZ product name

product name

Product

Image

Note: do not

change font size

in this template

Consumer

Industrial

Mini-Lock™

SPOX BMI™

C-Grid III™

SLSL™ Modular Connectors

KK®

SPOX™

18 www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Mini-Fit Sr.™ power connectors offer a compact wire-to-wire and wire-to-board high-current system capable of handling up to 50.0A per contact. This single- and dual-row system is UL, CSA and TUV approved. Features include integrally molded TPA’s on single-row products, positive locking and polarised housings across all circuit sizes.

10.00mm 50.0A 2 – 14

•Commercial Vehicles•Consumer•Industrial Automation•Medical•Networking

Molex offers the full range of RAST IDT connectors and headers. RAST 5 for indirect mating in either 10.0A or 16.0A versions. RAST 2.5 for direct and indirect mating and RAST Power in both 6.0A and 10.0A versions for direct or indirect mating. Multiple polarisation and coding options are available as standard and all products are Glow Wire compliant.

2.50mm 5.00mm

4.0A 16.0A

1 - 20•HomeAppliance•Consumer•Automotive

Able to handle up to 13.0A per contact when using the MarKK terminal the KK® 396 wire-to-board and board-to-board system is ideal for use in many varied applications.RPC(reflowprocesscompatible)headersare also available in vertical and right-angle friction-lock variations. UL 94V-0 and Glow wire compliant versions are also available.

3.96mmUp to 13.0A

2-24

•Automotive•Consumer•Industrial•Medical

Industry standard .093” pin-and-socket power connectors are suitable for wire-to-wire and wire-to-boardconfigurations.Terminalscanbeusedinbothplugorreceptaclehousingsallowingfordesignflexibility.PCB headers are also available. Features include panel mount and free hanging housings with positive locks and fully isolated contacts.

5.03mm 17.0A 1-15•Consumer•Data/Communications•Networking

The Mini-Fit® family is designed for higher-current / higher-density applications which require design flexibilityforwire-to-wire,wire-to-boardandboard-to-boardconfigurations.Featuresincludefullyisolatedterminals, positive locking, low-engagement forces and polarised housings and receptacles. Glow wire compliantandHalogenfreeversionsareavailable.

4.20mm 13.0A 2 - 24

•Consumer•Data/Communications•Industrial Automation•Networking•Medical•Automotive•Commercial Vehicle•Military/Aerospace•Telecommunications•Alternative Energy

Source

The MLX™ series is interchangeable, intermateable and intermountable with industry standard products. This allowsgreaterflexibilityinmatingwithexistingwireharnesses, connectors or PCB headers. The housings are designed for both male and female terminals. Housingsarefullypolarisedandofferpositivelocking.

6.35mm 13.5A 1-15

•Commercial Vehicle•Consumer•Industrial Automation

Networking

The Micro-Fit™ family is a wire-to-wire, wire-to-board and board-to-bord connector system in single- and dual-rowconfigurations.Featuresincludeblindmate(BMI),compliant pin (CPI) and reduced mating force (RMF) options. PCB-mount headers are available in straight and right angle, SMT and through-hole types, halogen-free and glow-wire compliant materials.

3.00mm 5.0A 2-24

•Alternative Energy Source•Consumer•Data/Communications•Medical•Military/Aerospace•Telecommunications

Mega-Fit Power Connectors deliver cutting-edge current density at 23.0A per circuit; terminals provide six independent contact points for long-term reliability in virtually every industry and application. Available in awire-to-boardconfigurationwithverticalandright-angled headers along with UL94V-0 and glow-wire compliant housings.

5.70mm 23.0A 2-12

•Consumer•HomeAppliance•Commercial Vehicle•Industrial•Telecom

Mini-Fit Sr.™

Mini-Fit® Products

RAST Connectors

MLX™

KK® 39.6

Micro-Fit™ Products

Mega-Fit

Standard .09.3’’

Wire-To-Board Power

19www.molex.com

Wire-To-Board Ribbon Cable / Wire Trap

Product Name Description Pitch CurrentRating

Circuits Size Applications

The iPass™ Interconnect System offers bothconnectorsandcableassembliesthatenableflexiblespeed compatibility for applications ranging from 1.5 Gbps up through 10.0 Gbps. Cable assemblies provide 100 Ohm differential impedance with tight skew control and low crosstalk, available in multiple standard / custom cable lengths.

0.75mm 0.80mm 1.27mm

N/A Multiple•Data/Communications•Networking•Telecommunications

Molex leads the way with an ever growing family of SATA interconnect solutions including latching cable receptacles in both straight- and right-angle versions for Parallel ATA to Serial ATA conversion, locking PCB plugs that are backwards-compatible in right-angle and vertical options, and combo external SATA and USB receptacles for effective storage.

Multiple N/A Multiple•Consumer•Networking•Storage

Low-Insertion-Force Micro SATA Revision 3.0 Specification-compliantinterconnectsdeliverhigh- speed data at 6 Gbps with uncompromised quality for 1.80” Solid State Drives, mobile computing and consumer applications. Features include FMLB, guide post and pockets, friction locks, solder tabs and high temperature thermoplastic housings.

1.27mm 1.32mm 5.08mm

1.5A AC or DC 14, 16 •Consumer

•Data/Communications

Also known as SAS Backplane Connector, this connector has the same form factor as Serial ATA with the addition ofa“bump”tokeyitspecificallyforSAS.Featuresinclude point-to-point topology, disk/ backplane interoperability with Serial ATA, hot plug, blind-mate connections, 3.0 Gbps transfer rate, compact cabling and multiple receptacle options.

0.80mm, 1.27mm

N/A Multiple•Data/Communications•Networking•Telecommunications

Serial Attach SCSI uses a point-to-point architecture which works in conjunction with PCI Express and other high-speed architectures on the market such as Serial ATA. Molex offers a broad range of connectors ranging from SAS Multi-Lane cable assemblies to SAS vertical and right angle Internal Multi-Lane connectors.

Multiple N/A Multiple•Consumer•Networking

iPass™

Serial Attached SCSI – SFF 8.48.4

Serial ATA

Micro SATA

Serial Attached SCSI – SFF 8.48.2

Product Name Description Pitch CurrentRating

Circuits Size Applications

The8versatileseriesofPicoflex® receptacles and headers, including the reverse-footprint SMT headers in standard and latched versions, enable maximum design flexibility.Picoflexoffersexcellentpolarisationtoboththe PCB and between the female connector and header. Plating options include tin and palladium nickel with goldflash.

1.27mm 1.2A 4-26

•Alternative Energy Source•Automotive•Consumer•Data/Communications•Industrial Automation •Medical

Lite-Trap™isalowprofile(4.20mm)SMTwire-to-boardconnector ideal for the lighting industry. A stripped wire is inserted into the connector and pushes open a gate-style terminal that “traps” the wire. To unmate, a button-style lever on the housing top is pushed down to allow the wire to be removed. The connector also features a compact industry standard PCB layout pattern.

4.0mm 9.0A 1 and 2•Solid State Lighting•Consumer•Industrial

Picoflex®

Wire-To-Board Storage

Lite-Trap™

20 www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Offered in wire-to-wire, wire-to-panel and wire-to-boardconfigurations,theIP67-ratedMX150L™systemprovidesdesignflexibilityforlowlevelsignaltohighpower applications. Key features include pre-assembled connector housings, integral TPA and two-way mat seal on mating connector, sealed panel-mount plugs and proven blade-type terminals.

5.84mm, 7.62mm

Up to 18.0A and

40.0A

2-16•Commercial Vehicle•Consumer•Industrial Automation

The Versablade™ wire-to-wire connector system consistsofwideflatbladetabterminals(1.78mm),multi-configuredmodularhousingsandterminalpositionassuranceinsertsformodularityanddesignflexibilityinvarious applications. Other features include positive lock and TPA secondary lock, single-row system and spring style mounting ears.

Various 4.0A -15.0A 1-9•Consumer•Industrial Automation

The MLX™ series is interchangeable, intermateable and intermountable with industry standard products. This allowsgreaterflexibilityinmatingwithexistingwireharnesses, connectors or PCB headers. The housings are designed for both male and female terminals. Housingsarefullypolarisedandofferpositivelocking.

6.35mm 13.5A 1 - 15

•Commercial Vehicle•Consumer•Industrial Automation

Networking

The Mini-Fit® family is designed for higher-current / higher-density applications which require design flexibilityforwire-to-wire,wire-to-boardandboard-to-boardconfigurations.Featuresincludefullyisolatedterminals, positive locking, low-engagement forces and polarised housings and receptacles. Glow wire compliant andHalogenfreeversionsareavailable.

4.20mm 13.0A 2 - 24

•Consumer•Data/Communications•Industrial Automation•Networking•Medical•Automotive•Commercial Vehicle•Military/Aerospace•Telecommunications•Alternative Energy

Source

Industry standard .093” pin-and-socket power connectors are suitable for wire-to-wire and wire-to-boardconfigurations.Terminalscanbeusedinbothplugorreceptaclehousingsallowingfordesignflexibility.PCB headers are also available. Features include panel mount and free hanging housings with positive locks and fully isolated contacts.

5.03mm 17.0A 1-15•Consumer•Data/Communications•Networking

The Industry standard 0.62“ pin-and-socket wire-to-wire connector system provides a robust economical solution to applications needing a current handling capability of upto5.0A.Housingswillacceptbothmaleandfemaleterminals and are polarised to eliminate mismating. 3.68mm 5.0A 1-36

•Consumer•Data/Communications•Networking

Smallest pitch wire-to-wire connector system for 100 to 300 V signal and power applications when using 2.60mm diameter wire. The system features a positive lock design for secure mating, fully shrouded contacts and an optional TPA retainer. 3.30mm 4.0A 2-6

•Consumer•Industrial Automation

Beau™ plug and socket blade-type connectors provide superior durability over hollow-pin connectors, allowing repetitive mating without any damage. Thermoplastic backshells provide greater dielectric strength and safety,uniformfloatcontactsenablemaximumsurfaceengagement, low contact resistance and easier mating.

6.35mm 10.0A 2-24•Consumer•Industrial Automation

MX150L™

Standard .09.3’’

Versablade™

Standard .062’’

MLX™

Inertia Lock 3.30mm

Mini-Fit® Products

Beau™ Power Connectors

Wire-To-Wire Power

21www.molex.com

Product Name Description Pitch Current Rating

Circuits Size Applications

The Micro-Fit™ family is a wire-to-wire, wire-to-board and board-to-bord connector system in single- and dual-rowconfigurations.Featuresincludeblindmate(BMI),compliant pin (CPI) and reduced mating force (RMF) options. PCB-mount headers are available in straight andrightangle,SMTandthrough-holetypes,HalogenFree and Glow Wire compliant materials.

3.00mm 5.0A 2-24

•Alternative Energy Source•Consumer•Data/Communications•Medical•Military/Aerospace•TelecommunicationsMicro-Fit™

Products

Wire-To-Wire Power

Product Name Description Pitch CurrentRating

Circuits Size Applications

The SPOX™ family features Mini-SPOX™, including crimp and IDT housings, wire-to-wire and wire-to-board options and Macro-SPOX™, including unshrouded and partially shrouded headers, along with board-to-board options. The “spring box“-shaped terminals provide multiple points of contact assuring excellent signal integrity.

2.50- 5.08mm

3.0-7.0A 2-16

•Transportation•Consumer•Data/Communications •Industrial Automation

SPOX BMI™ (Blind-Mate Interface) connectors offer low-profile,dual-row,wire-to-wireandwire-to-boardsolutions. Self-aligning features and mated stack distance of only 11.00mm allow for secure use in both horizontal and vertical directions. Multiple pin counts permitdesignflexibilityandprovidesolutionsforbothpower and signal applications.

2.54mm 3.0A 6-16•Networking•Telecommunications

Mizu-P25™ wire-to-wire connector system is IP67 certified.Thefamilyincludessystemsratedupto125 V and 250 V. Due to their small dimensions both systems are ideal for wire-to-wire applications in confinedspaces.Otherfeaturesincludepositivelocking,polarisation and special terminal designs for high vibration applications.

2.50mm 3.0/4.0A 2-4•Transportation•Consumer•Industrial Automation

SL™ (Stackable Linear) is a modular, single-row, wire-to-wireandwire-to-boardsystemincludingpress-fit(compliant-pin), through-hole and SMT PCB termination. Latching vertical/right-angle headers; discret wire, FFC and IDT crimp housings are available. SL™ intermates with CGrid® and KK® product families insamepitchtoprovidedesignflexibilityandconfigurationoptions.

2.54mm 3.0A 2-25

•Transportation•Consumer•Data/Communications•Industrial Automation•Medical•Networking

SPOX™

SPOX BMI™

Mizu-P25™

SL™ Modular Connectors

Wire-To-Wire Signal

22 www.molex.com

Product Name Description Speed Density Orien-tation Applications

The Impact™ backplane connector system for con-ventional,coplanarandmezzanineconfigurationsprovides data rates up to 25 Gbps and superior signal density up to 80 differential pairs per inch. Achieve low cross-talk and high signal bandwidth while minimising channel-performance variation across every differential pair within the system.

25 Gbps80 diff

pair / sq inch

ConvenCoplanar

Mezz

•Data Communications•Telecommunications•Military/Aerospace

GBX I-Trac™ system, available in standard backplane, orthogonal midplane, high-current power modules, invertedandcoplanarconfigurationsprovidesdesignflexibilityandenablesfuturesystemperformanceupgrades without requiring platform re-design. Capable of supporting next-generation applications with data rates of 12.5 Gbps or higher.

12.5 Gpbs69 diff

pair / sq inch

ConvenCoplanarInvertedOrthog

•Networking•Telecommunications

TheZ-PACKTinMan’spress-fit,flexible,mono-blockbased system can be stacked end-to-end to meet customer pin-count requirements. The system delivers integrated shielding, differential-pair density, 85 Ohm impedance and lower crosstalk and insertion loss versus 100 Ohm backplane systems.

*Z-PACK and Z-PACK TinMan are trademarks of Tyco Electronics

12.5 Gbps66 diff

pair / sq inchConvenMezz

•Data Communications•Medical•Networking•Telecommunications

GbX® backplane connectors deliver high-density and high-speedsupto10Gbpsandarecustom-configurable.Bifurcated contact beams in daughtercard receptacles ensure greater reliability with 2 points of contact to each header pin. †GbX® is a registered trademark of Amphenol Corporation

10 Gbps69 diff

pair / sq inch

ConvenCoplanarOrthog

•Data Communications•Medical•Networking•Telecommunications

VeryHighDensityMetricconnectorsachievehigh- speed signal integrity via interstitial signal and ground shieldsbetweencolumns.StandardVHDM®* connectors support data rates of 3.125 Gbps with less than 5% crosstalk;H-seriessupportsupto6.25Gbps.

*VHDMisaregisteredtrademarkofAmphenolCorporation

Up to 6.25 Gbps

100 diff pair / sq inch

ConvenCoplanar

•Data Communications•Industrial Automation•Medical•Military/Aerospace•Networking•Telecommunications

MicroTCAdeliversalow-cost,flexibleandscaleablesolution with 10.0 Gbps data rate for a wide variety of lowtomid-rangetelecomapplications.Thispress-fit,vertical, edge-card connector provides 170 contacts on 0.75mm pitch and enables AdvancedMC (AMC) cards to be plugged directly to a backplane.

10Gbps 1.5A 170 ckt.•Medical•Instrumentation•Telecommunications

Impact™

MicroTCA

VHDM®

GbX I-Trac™

Z-PACK TinMan*

GbX®†

Board-To-Board High Speed

23www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Molex’s SlimStack™ family of board-to-board connectors offers stacking heights from 0.70mm to 20.00mm. All versions are gold-plated for high reliability over multiple mating cycles. Other features include a durable blade-on-beam contact, SMT tails that create strong solder fillets,andafrictionlockingfeatureforaddedmatingretention.

0.40/0.50 0.635/

1.00mm 0.4/0.5A 6-140

•Transportation•Consumer

Standardised PCI mezzanine card connectors have a fully shrouded leaf-style design which minimizes the chance of damaging plug contacts. Receptacle contacts feature a low mating force that reduces PCB stress. Gold over Nickel contact plating enhances long-term reliability.LCPhousingsenableSMTreflowprocessing.

1.00mm 1.0A 64-256•Consumer• Networking•Telecommunications

Molex’scompressionconnectorsofferdesignflexibility,reduced component counts and a high degree of manufacturability. The range includes parts with a height above the board of 0.60mm and contact pitches as small as 0.70mm. The high temperature materials used in the manufacturing process enable the parts to beIRreflowsoldered.

0.7mm - 4.5mm

1.5-7.0A 2-10•Transportation•Consumer•Mobile Devices

The Flexi-Mate™ connector system provides a full range of co-planar wire-to-board, board-to-board and terminator options for the lighting industry. Key features include a dual-contact terminal design for secure electrical contact and space-saving positive side locks. Guide features help facilitate mating and protect terminals.

3.70mm 2.0A 2 •Consumer

MicroTCAdeliversalow-cost,flexibleandscaleablesolution with 10.0 Gbps data rate for a wide variety of lowtomid-rangetelecomapplications.Thispress-fit,vertical, edge-card connector provides 170 contacts on 0.75mm pitch and enables AdvancedMC (AMC) cards to be plugged directly to a backplane.

0.75mm 1.5A 170•Medical•Instrumentation•Telecommunications

MicroTCA

SlimStack™

PMC

Compression Connectors

Flexi-Mate™

Board-To-Board Microminiature

24 www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

EXTreme PowerMass™ is a high-current, board-to-board, modular connector system, providing customer-specificinterconnectsolutionsforACandDC power requirements. The system offers a density of up to 350.0A per inch while providing minimum heat generation due to extremely low plane-to-plane resistance.

Various150.0A, 80.0A, 40.0A

Multiple power and

signal

•Networking•Telecommunications

EXTremeTen60Power™iseasilyconfiguredtomeetspecial design requirements with no tooling costs! The system is a modular high-current power and signal connector system in a coplanar and right-angle board-to-boardorientation.Thelowprofile(10.0mmheight)helpstoenhancethesystemairflowwithinthepowersystem.

Various 60.0A Multiple•Industrial Automation•Networking•Telecommunications

EXTreme ZPower™ is a high-current, rigid, board-to-board and wire-to-board mezzanine style interconnect designed to transfer power loads from one PCB to another.Theconnectorispress-fitintothePCbaseboard. The PC top board is then screwed down on top of the EXTreme ZPower connector, forming a high-pressure interface.

10.30mm 30.0A 1•Industrial Automation•Power Supplies•Telecommunications

EXTreme PowerEdge™ is a one-piece vertical card edge styleconnector,usedwitheithergoldfingerpcboards,or as a bus bar interconnect for power supply and power distribution applications. Connectors are available in power only, signal only and power/signal combinations andcanbeconfiguredforACandDCpowersystems.

Various 40.0A Multiple •Networking•Telecommunications

EXTreme PowerDock™ interconnects include guide pins for blind mating, mounting ears option for mechanical attachment to the PCB, power blades and signal pins inmultiplelengthsandpress-fittails.Thisfamilycanbe used as a drop-in replacement in many existing applicationsduetoitscustomconfigurablenature.

Various40.0A 3.0A

Multiple

•Consumer•Data Communications•Industrial Automation•Networking•Telecommunications

TheEXTremeLPHPower™connectorisamixed,high-current power and signal connector system with power blades parallel to the PC board. Its extremely low-profileheightofonly7.50mmallowsgreatersystemairflowwhiletakingup53%lessspacethantraditionalconnectors with the same current rating. Right-angle, coplanarorverticalconfigurationsareavailable.

Various35.0A 3.0A

Multiple

•Data Communications•Industrial Automation•Networking•Telecommunications

EXTreme PowerPlus™ series conforms to the Server SystemInfrastructure(SSI)openspecification.Featuresinclude recessed signal-pins and sequential mating (LMFB) that allows the hot-swapping of power supply units on the male side, guide pockets (headers) or guide posts (receptacles) and fully shrouded headers.

Various30.0A 1.0A

Multiple

•Data Communications•Industrial Automation•Networking•Telecommunications

The Mini-Fit® family is designed for higher-current / higher-density applications which require design flexibilityforwire-to-wire,wire-to-boardandboard-to-boardconfigurations.Featuresincludefullyisolatedterminals, positive locking, low-engagement forces and polarised housings and receptacles. Glow wire compliant andHalogenfreeversionsareavailable.

4.20mm 13.0A 2 - 24

•Consumer•Data/Communications•Industrial Automation•Networking•Medical•Automotive•Commercial Vehicle•Military/Aerospace•Telecommunications•Alternative Energy

Source

EXTreme PowerMass™

EXTreme PowerDock™

EXTreme Ten60Power™

EXTreme LPHPower™

EXTreme ZPower™

EXTreme PowerPlus™

EXTreme PowerEdge™

Mini-Fit® Products

Board-To-Board Power

25www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

The Milli-Grid™ family, saves up to 40% in PCB real estate over traditional 2.54mm pitch connectors. Suitable for wire-to-board, board-to-board and IDT cable-to board connections. Features include early entry (long wipe) terminals, center polarisation key and locking ramps, SMT and through-hole headers.

2.00mm 2.0A 4 -50

•Automotive•Consumer•Networking•Telecommunications

A versatile single-row wire-to-board and board-to-board crimp contact system. Vertical and right-angle PCB headers with or without polarisation and friction locks. Right-angle top- and bottom-entry PCB connectors mate with standard headers to facilitate board-to-board configurations.

2.54mm 5.0A 2-36

•Transportation•Consumer•Data/Communications•Industrial Automation•Medical•Networking

The 3rd generation C-Grid III™ system offers unique design features including 3 different plating options, a termination technique supporting discrete wire and ribbon cable connectors, inter-mateability with Molex‘s QF-50 product line and full compatibility with DIN41651, HE-13/14standardconnectorsystems.

2.54mm 3.0A 2-130•Transportation•Consumer

SL™ (Stackable Linear) is a modular, single-row, wire-to-wireandwire-to-boardsystemincludingpress-fit(compliant-pin), through-hole and SMT PCB termination. Latching vertical/right-angle headers; discret wire, FFC and IDT crimp housings are available. SL™ intermates with CGrid® and KK® product families insamepitchtoprovidedesignflexibilityandconfigurationoptions.

2.54mm 3.0A 2-25

•Transportation•Consumer•Data/Communications•Industrial Automation•Medical•Networking

Milli-Grid™

KK® 254

C-Grid III™

SL™ Modular Connectors

Board-To-Board Power

Product Name Description Pitch Current Rating

Circuits Size Applications

Able to handle up to 13.0A per contact when using the MarKK™ terminal the KK® 396 wire-to-board and board-to-board system is ideal for use in many varied applications.RPC(reflowprocesscompatible)headersare also available in vertical and right-angle friction-lock variations. UL 94V-0 and Glow Wire compliant versions are also availble.

3.96mm Up to 13.0A 2-24

•Automotive•Consumer•Industrial•Medical

KK® 39.6

Board-To-Board Signal

26 www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Molex leads the way with an ever growing family of SATA interconnect solutions including latching cable receptacles in both straight- and right-angle versions for Parallel ATA to Serial ATA conversion, locking PCB plugs that are backwards-compatible in right-angle and vertical options, and combo external SATA and USB receptacles for effective storage.

Multiple N/A Multiple•Consumer•Networking•Storage

Low-Insertion-Force Micro SATA Revision 3.0 Specification-compliantinterconnectsdeliverhigh- speed data at 6 Gbps with uncompromised quality for 1.80” Solid State Drives, mobile computing and consumer applications. Features include FMLB, guide post and pockets, friction locks, solder tabs and high temperature thermoplastic housings.

1.27mm 1.32mm 5.08mm

1.5A AC or DC

14, 16•Consumer•Data/Communications

Molex‘s versatile low-cost EBBI™ 50D series are unshielded, high density, leaf-style connectors available in vertical, right-angle, blind-mating and SMT configurations.HousingsareUL94V-0approved,theIDTreceptacles mate to standard .062 inch pc card edge and terminals are plated with 30µ“ minimum gold in the mating area.

1.27mm 1.0A 30 - 130•Data communication•Telecommunication

Serial ATA

Micro SATA

EBBI™ 50D

Board-To-Board Storage

Product Name Description Pitch CurrentRating

Circuits Size Applications

The Micro-Fit™ family is a wire-to-wire, wire-to-board and board-to-bord connector system in single and dual rowconfigurations.Featuresincludeblindmate(BMI),compliant pin (CPI) and reduced mating force (RMF) options. PCB mount headers available in straight and rightangle,SMTandT/Htypes.Halogen-freeandglow-wire compliant materials.

3.00mm 5.0A 2-24

•Alternative Energy Source•Consumer•Data/Communications•Medical•Military/Aerospace•Telecommunications

A versatile single-row wire-to-board and board-to-board crimp contact system. Vertical and right-angle PCB headers with or without polarisation and friction locks. Right-angle top- and bottom-entry PCB connectors mate with standard headers to facilitate board-to-board configurations.

2.54mm 5.0A 2-36

•Transportation•Consumer•Data/Communications•Industrial Automation•Medical•Networking

The Industry standard 0.62“ pin-and-socket wire-to-wire connector system provides a robust economical solution to applications needing a current handling capability of upto5.0A.Housingswillacceptbothmaleandfemaleterminals and are polarised to eliminate mismating. 3.68mm 5.0A 1-36

•Consumer•Data/Communications•Networking

Micro-Fit™ 3.0

KK 245®

Standard .062’’

Power ConnectorsCurrent up to 5A

27www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

The Mini-Fit® family is designed for higher-current / higher-density applications which require design flexibilityforwire-to-wire,wire-to-boardandboard-to-boardconfigurations.Featuresincludefullyisolatedterminals, positive locking, low-engagement forces and polarised housings and receptacles. Glow Wire compliantandHalogenfreeversionsareavailable.

4.20mm 13.0A 2 - 24

•Consumer•Data/Communications•Industrial Automation•Networking•Medical•Automotive•Commercial Vehicle•Military/Aerospace•Telecommunications•Alternative Energy

Source

The MLX™ series is interchangeable, intermateable and intermountable with industry standard products. This allowsgreaterflexibilityinmatingwithexistingwireharnesses, connectors or PCB headers. The housings are designed for both male and female terminals. Housingsarefullypolarisedandofferpositivelocking.

6.35mm 13.5A 1 - 15

•Commercial Vehicle•Consumer•Industrial Automation

Networking

Industry standard .093” pin-and-socket power connectors are suitable for wire-to-wire and wire-to-boardconfigurations.Terminalscanbeusedinbothplugorreceptaclehousingsallowingfordesignflexibility.PCB headers are also available. Features include panel mount and free hanging housings with positive locks and fully isolated contacts.

5.03mm 17.0A 1-15•Consumer•Data/Communications•Networking

RAST 5 IDT and crimp connectors are extremely reliable power connectors meeting all industry standards and testing requirements. Features include Glow Wire compliant, low-insertion force, colour-coded polarisation, multiplekeyingandlatchingconfigurations,verticalandright-angle headers are also available in tin and silver plating.

5.00mm10.0A, 16.0A

1 - 8 •Consumer

Sabre™ is a high-current wire-to-wire and wire-to-board connector family with a built-in TPA feature that prevents terminal backout. Crimp terminals are available to suit a wide range of wire guages and insulation thicknesses and terminals are fully isolated. The system is UL recognised, CSA approved, TUV licensed.

7.50mm 18.0A 2 - 8

•Alternative Energy Source•Consumer•Industrial Automation•Medical•Military/Aerospace•Networking•Telecommunications

Able to handle up to 13.0A per contact when using the MarKK™ terminal the KK® 396 wire-to-board and board-to-board system is ideal for use in many varied applications.RPC(reflowprocesscompatible)headersare also available in vertical and right-angle friction-lock variations. UL 94V-0 and Glow Wire compliant versions are also available.

3.96mmUp to 13.0A

2-24

•Automotive•Consumer•Industrial•Medical

Mini-Fit® Products

MLX™

Standard .09.3’’

RAST 5

Sabre™

KK™ 39.6

Power ConnectorsCurrent up to 20A

28 www.molex.com

Power ConnectorsCurrent up to 21A+

Product Name Description Pitch CurrentRating

Circuits Size Applications

EXTreme PowerMass™ is a high-current, board-to-board, modular connector system, providing customer-specificinterconnectsolutionsforACandDC power requirements. The system offers a density of up to 350.0A per inch while providing minimum heat generation due to extremely low plane-to-plane resistance.

Various150.0A, 80.0A, 40.0A

Multiple power and

signal

•Networking•Telecommunications

EXTremeTen60Power™iseasilyconfiguredtomeetspecial design requirements with no tooling costs! The system is a modular high-current power and signal connector system in a coplanar and right-angle board-to-boardorientation.Thelowprofile(10.0mmheight)helpstoenhancethesystemairflowwithinthepowersystem.

Various 60.0A Multiple•Industrial Automation•Networking•Telecommunications

EXTreme ZPower™ is a high-current, rigid, board-to-board and wire-to-board mezzanine style interconnect designed to transfer power loads from one PCB to another.Theconnectorispress-fitintothePCbaseboard. The PC top board is then screwed down on top of the EXTreme ZPower connector, forming a high-pressure interface.

10.30mm 30.0A 1•Industrial Automation•Power Supplies•Telecommunications

EXTreme PowerEdge™ is a one-piece vertical card edge styleconnector,usedwitheithergoldfingerpcboards,or as a bus bar interconnect for power supply and power distribution applications. Connectors are available in power only, signal only and power/signal combinations andcanbe,configuredforACandDCpowersystems.

Various 40.0A Multiple •Networking•Telecommunications

EXTreme PowerDock™ interconnects include guide pins for blind mating, mounting ears option for mechanical attachment to the PCB, power blades and signal pins inmultiplelengthsandpress-fittails.Thisfamilycanbe used as a drop-in replacement in many existing applicationsduetoitscustomconfigurablenature.

Various40.0A 3.0A

Multiple

•Consumer•Data Communications•Industrial Automation•Networking•Telecommunications

TheEXTremeLPHPower™connectorisamixed,high-current power and signal connector system with power blades parallel to the PC board. Its extremely low-profileheightofonly7.50mmallowsgreatersystemairflowwhiletakingup53%lessspacethantraditionalconnectors with the same current rating. Right-angle, coplanarorverticalconfigurationsareavailable.

Various35.0A 3.0A

Multiple

•Data Communications•Industrial Automation•Networking•Telecommunications

EXTreme PowerPlus™ series conforms to the Server SystemInfrastructure(SSI)openspecification.Featuresinclude recessed signal-pins and sequential mating (LMFB) that allows the hot-swapping of power supply units on the male side, guide pockets (headers) or guide posts (receptacles) and fully shrouded headers.

Various30.0A 1.0A

Multiple

•Data Communications•Industrial Automation•Networking•Telecommunications

Exceed high-current and reliability requirements in top-end server and high-power applications with Molex’s compact, EXTreme Guardian™ Power Connector System, providing EMI/RFI shielding, overmolding and discrete-wireoptionsfordesignflexibility.Thiswire-to-boardsystemalsofeatures‘firstmate,lastbreak’contactarrangements.

11.00mm 80.0A 2 and 3

•Automotive•Consumer•Telecom•Datacom

EXTreme PowerPlus™

EXTreme LPHPower™

EXTreme PowerMass™

EXTreme Ten60Power™

EXTreme ZPower™

EXTreme PowerEdge™

EXTreme PowerDock™

EXtreme Guardian™

29www.molex.com

Power ConnectorsCurrent up to 21A+

Product Name Description Pitch Current Rating

Circuits Size Applications

Mini-Fit Sr.™ power connectors offer a compact wire-to-wire and wire-to-board high-current system capable of handling up to 50.0A per contact. This single- and dual-row system is UL, CSA and TUV approved. Features include integrally molded TPA’s on single-row products, positive locking and polarised housings across all circuit sizes.

10.00mm 50.0A 2-14

•Commercial Vehicles•Consumer•Industrial Automation•Medical•Networking

Mega-Fit Power Connectors deliver cutting-edge current density at 23.0A per circuit; terminals provide six independent contact points for long-term reliability in virtually every industry and application. Available in awire-to-boardconfigurationwithverticalandright-angled headers along with UL94V-0 and Glow Wire compliant housings.

5.70mm 23.0A 2-12

•Consumer•HomeAppliance•Commercial Vehicle•Industrial•Telecom

Sabre™ is a high-current wire-to-wire and wire-to-board connector family with a built-in TPA feature that prevents terminal backout. Crimp terminals are available to suit a wide range of wire gauges and insulation thicknesses and terminals are fully isolated. The system is UL recognised, CSA approved, TUV licensed.

7.50mm 18.0A 2-8

•Alternative Energy Source•Consumer•Industrial Automation•Medical•Military/Aerospace•Networking•Telecommunications

Mini-Fit Sr.™

Mega-Fit

Sabre™

30 www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Industry standard USB connectors and cable assemblies provide connection for power and data exchange without the need for a host PC across a variety of industries. Available in standard, mini and micro versions.

2.00mm 2.50mm

1.5A 5

•Consumer•Medical•Smart Phones and

Mobile Devices

The DisplayPort solution consists of SMT external receptacles with a polarised D-shape mating interface and PCB retention features. Receptacles are mountable on the device side and the overmolded plug connects to the display device. The cable assemblies come in both latching and non-latching versions.

*DisplayPort is a trademark of Video Electronics Standards Association (VESA)

0.50mm 0.5A 20•Consumer•Data/Communications

HighDefinitionMultimediaInterface(HDMI*)Connectorscome in a compact, user-friendly fully shielded design. A single cable bandwidth of 5 Gbps carries both uncompressed audio and video. Other features include backwardcompatibleHDMItoDVIcables,mountingflangesandtriadsignallayout.

*HDMI,theHDMILogo,andHighDefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMILicensingLLC in the US and other countries.

0.40mm 0.50mm

0.8A 19 •Consumer

A 19-pin interconnect in a stainless steel shell, half the size of the current Mini connector, offering all the advan- tagesoftheHDMI1.4specification.AvailableinfullSMT,through-hole shell tabs and hybrid SMT and through-hole shell tab versions; receptacles offer friction lock and terminal hold-down features. Cable assemblies available.

*HDMI,theHDMILogo,andHighDefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMILicensingLLC in the US and other countries

0.40mm 0.8A 19

•Automotive •Consumer•Smart phones and

Mobile Devices

The Molex MicroCross DVI system provides a high-bandwidth video interface for host and display devices.TheruggedLFH(LowForceHelix)contactdesign provides two points of contact for optimal signal integrity and reduces insertion force to ensure high reliability. A full range of connectors, cables and adaptors is available.

N/A 3.0A 29 •Consumer

USB Products

DisplayPort*

MicroCross DVI

HDMI*

Micro HDMI*

I/O ConnectorsConsumer / PC

31www.molex.com

Product Name Description Pitch Current Rating

Circuits Size Applications

The iPass™ Interconnect System offers bothconnectorsandcableassembliesthatenableflexiblespeed compatibility for applications ranging from 1.5 Gbps up through 10 Gbps. Cable assemblies provide 100 Ohm differential impedance with tight skew control and low crosstalk, available in multiple standard / custom cable lengths.

0.75mm 0.80mm 1.27mm

N/A Multiple•Data/Communications•Networking•Telecommunications

iPass+™HD,alsonamedmini-SAS,improvessystemairflowandsignalintegritybyeliminatingmidplaneconnections.Thislow-profilesystem,meetsSAS-3next-generation speed and density requirements, with signals enabling active copper and optical cable modules. iPass+HDconnectorsmatetoallcurrentminiSASHDcable assemblies.

0.75mm N/A36, 62, 72, 144

•Data/Communications•Networking•Telecommunications

The newest addition to the iPass+™ family enables pluggable copper/optical options, thereby increasing theflexibilityofsystem-levelhardwareforendusers.Offeredasone-piecepress-fitconnectorandcage assembly in both single and stacked dual-port configurations.AdoptedbyInfiniband*CXP12xQDRand IEEE 802.3ba.

*TrademarkoftheInfiniBandTradeAssociation

0.80mm N/A 84, 168•Networking•Telecommunications

The Quad Small Form-factor Pluggable Plus (QSFP+) Interconnect system is designed for high density applications. The QSFP+ connector, cage and cable assemblies (copper and optical) and loopbacks are part of a highly-integrated system that combines effective use of space, power and port density for high-density applications.

0.80mm N/A N/A•Automotive•Networking•Telecommunications

ThepatentedLowForceHelix(LFH)malepininterfaceswith a split-beam receptacle contact giving a low insertion force with 2-point contact reliability. The system will accept various wire sizes and is available in vertical and right-angle header versions. Optional hardware for docking applications is also available.

1.27mm (Matrix 50),

1.90mm (Matrix 75)

1.0A

60-200 (Matrix 50);

96-130 (Matrix 75)

•Data/Communications •Medical•Networking•Telecommunications

TDP® connectors provide a shielded, dual-row, cable-to-board interface offering mid-range speed (up to 5Gbps) and 100 Ohm controlled impedance. Fully shielded vertical (through-hole) and right-angle (SMT) receptacles plus fully shielded plugs and cable kits are available. Overmolded cable assemblies complete the range.

1.27mm 1.5A18, 28, 38,

48, 72

•Consumer•Data/Communications•Industrial Automation•Medical

TheUltra+™VeryHighDensityCableInterconnect system features “blade on beam” style contact, reduced size (27% smaller than SCSI-3), increased robustness, improved electrical performance and higher density. Superior leaf/ribbon style contact, meetsEIA,ANSI/SFF-8441andSPI-4specificationstoensure intermatability with conforming products.

0.80mm N/A 68, 136

•Data/Communications•Industrial Automation•Medical•Networking•Telecommunications

Molex offers jacks in a variety of styles and configurations,includingright-angle,top-andbottom-entry, through-hole and SMT, shielded and un-shielded using gold or high durability palladium-nickel plating. Modular jacks with integrated magnetics with or without LED’s that support Power-over-Ethernet (PoE) are also available.

Various Various Various

•Consumer•Data/Communications•Industrial Automation•Medical•Networking

iPass™

LFH

IPass+™ HD

TDP® (Triad™ Differential Pair)

IPass+™ High Speed Channel (HSC)

Ultra+™ VHDCI

QSFP+

Modular Plugs - Jacks

I/O ConnectorsNetworking / Telecomm

32 www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Molex has developed seven series of Micro-USB Type ‘B’ and Type ‘AB’ receptacles in a selection of top-, bottom- and mid-mount versions, and a new series of USB ‘A’ to Micro-USB ‘B’ cable assemblies. These connectors include a lead-in feature in the connector housing for blind-mating of the receptacle to the plug.

0.65mm1.0 (Signal), 1.8 (Power)

5•Consumer•Smart Phones and

Mobile Devices

Key features of the USB OTG are compact and light-weight design (about 1/8th the size of standard USB-B connectors), fully shielded, fully compliant with USB 2.0specifications,detentlockandkeyingfeature,5-pindesign and high durability of 5,000 mating cycles, UL certified.Cableassembliesavailable.

0.80mm 1.0A 5•Consumer•Smart Phones and

Mobile Devices

Mini DisplayPort* is 50% of the size of standard DisplayPort connectors, delivering pure digital connections quickly and seamlessly to external displays and offering plug-and-play performance while supporting VGA, DVI and dual-link DVI connections.

*DisplayPort is a trademark of Video Electronics Standards Association (VESA)

0.60mm 0.5A 20 •Consumer•Data/Communications

A 19-pin interconnect in a stainless steel shell, half the size of the current Mini connector, offering all the advan- tagesoftheHDMI1.4specification.AvailableinfullSMT,through-hole shell tabs and hybrid SMT and through-hole shell tab versions; receptacles offer friction lock and terminal hold-down features. Cable assemblies available.

*HDMI,theHDMILogo,andHighDefinitionMultimediaInterfacearetrademarksorregisteredtrademarksofHDMILicensingLLC in the US and other countries

0.40mm 0.8A 19

•Automotive •Consumer•Smart phones and

Mobile Devices

TheHandyLink™USB2.0compatiblefamilyincludesa right-angle SMT receptacle, a wire and PCB version of the plug, perpendicular and parallel mounted cradle connectors for docking applications and a wide array of cableassemblies.HandyLinkwire-to-boardsolutionsandboard-to-boarddockingsolutionsareRoHScompliant.

0.80mm 1.5 – 3.0A 16

•Aerospace and Defence•Automotive•Consumer•Data/

Communications•Medical•Smart Phones and

Mobile Devices

Micro USB

HandyLink™

USB OTG (On-The-Go)

Mini DisplayPort*

Micro HDMI*

I/O ConnectorsMobile Products

33www.molex.com

Product Name Description Pitch Current Rating

Circuits Size Applications

Molex’s CRC™ rectangular I/O connector system provides a compact solution for small industrial robots and factory automation equipment. The system includes panel-mount and wire-to-wire versions, and takes up only about 1/15th the space of industry-standard heavy-duty connectors.

Various 7.0, 15.0A

12, 20, 30, 50

(signal); 4, 15

(power)

•Aerospace and Defence•Automotive•Data/Communications•Industrial Automation•Medical•Telecommunications

Molex’slineofHMC™HeavyDutyRectangularConnectors offer a unique new design and user-friendly features compared to traditional-style heavy duty connectors for robotic and other industrial applications. Multi-module types allow gender interchanging of housings,aswellashybridconfigurationsusingdifferent terminal inserts.

N/A6.0, 10.0,

12.0A12, 36, 40, 48, 52, 72

•Industrial Automation

ThecompactsizedMini-HMC™familyincorporatesthe same unique features of Molex’s standard HMC™connectorssuchasaone-touchlockandinterchangeable housings with the same solderless crimp terminals as Molex’s CRC™ connectors. Other features include a braided wire clamp for additional ESD shielding and a hard-shell hood.

3.00mm 7.0A 10, 40•Data/Communications•Industrial Automation•Medical

High-densityCommercialMicro-Dshieldedmicrominiature connectors provide 4 times the density of standard D-sub connectors. Commercial versions available in right-angle (single row and stacked) and verticalconfigurations,cableassembliesinsingle-anddouble-ended Commercial Micro-D to standard D-Sub connectors.

1.27mm 1.0A Various

•Aerospace and Defence•Commercial Vehicle•Data/Communications•Industrial General•Medical

Compact Robotic Connector - CRC™

Heavy Duty Rectangular Connector - HMC™ Connectors

Mini-HMC™

Commercial Micro-D

I/O ConnectorsIndustrial Products

34 www.molex.com

Product Name Description Speed Density Orientation Applications

The Impact™ backplane connector system for con-ventional,coplanarandmezzanineconfigurationsprovides data rates up to 25 Gbps and superior signal density up to 80 differential pairs per inch. Achieve low cross-talk and high signal bandwidth while minimising channel-performance variation across every differential pair within the system.

25 Gbps80 diff

pair / sq inch

ConvenCoplanar

Mezz

•Data Communications•Telecommunications•Military/Aerospace

GBX I-Trac™ system, available in standard backplane, Orthogonal midplane, high-current power modules, InvertedandCoplanarconfigurationsprovidesdesignflexibilityandenablesfuturesystemperformanceupgrades without requiring platform re-design. Capable of supporting next-generation applications with data rates of 12.5 Gbps or higher.

12.5 Gpbs69 diff

pair / sq inch

ConvenCoplanarInvertedOrthog

•Networking•Telecommunications

TheZ-PACKTinMan’spress-fit,flexible,mono-blockbased system can be stacked end-to-end to meet customer pin-count requirements. The system delivers integrated shielding, differential-pair density, 85 Ohm impedance and lower crosstalk and insertion loss versus 100 Ohm backplane systems.

*Z-PACK and Z-PACK TinMan are trademarks of Tyco Electronics

12.5 Gbps66 diff

pair / sq inchConvenMezz

•Data Communications•Medical•Networking•Telecommunications

GbX® backplane connectors deliver high-density and high-speedsupto10Gbpsandarecustom-configurable.Bifurcated contact beams in daughtercard receptacles ensure greater reliability with 2 points of contact to each header pin. †GbX® is a registered trademark of Amphenol Corporation

10 Gbps69 diff

pair / sq inch

ConvenCoplanarOrthog

•Data Communications•Medical•Networking•Telecommunications

VeryHighDensityMetricconnectorsachievehigh- speed signal integrity via interstitial signal and ground shieldsbetweencolumns.StandardVHDM®* connectors support data rates of 3.125 Gbps with less than 5% crosstalk;H-seriessupportsupto6.25Gbps.

*VHDMisaregisteredtrademarkofAmphenolCorporation

Up to 6.25 Gbps

100 diff pair / sq inch

ConvenCoplanar

•Data Communications•Industrial Automation•Medical•Military/Aerospace•Networking•Telecommunications

TheHighDensityMetric(HDM®*) connector system suits applications that require high interconnect density and high-speed signal integrity. Daughter card modules are combined on a metal stiffner enabling very high circuit count assemblies to be handled as one connector. Power, guidance and coding function modules are also available.

*HDMisaregisteredtrademarkofAmphenolCorporation

N/A 30 Contacts/CM

Right AngleVertical •Networking

MicroTCA™deliversalow-cost,flexibleandscaleablesolution with 10.0 Gbps data rate for a wide variety of lowtomid-rangetelecomapplications.Thispress-fit,vertical, edge-card connector provides 170 contacts on 0.75mm pitch and enables AdvancedMC (AMC) cards to be plugged directly to a backplane.

10Gbps N/A Card Edge•Medical•Instrumentation•Telecommunications

Impact™

VHDM®*

GBX I-Trac™

HDM®*

Z-PACK TinMan*

GbX®†

Backplane ConnectorsHigh Speed

MicroTCA™

35www.molex.com

Product Name Description Speed Density Circuits Size Applications

TheVeryHighDensityMetric(VHDM*)systemcomprises arrays of individual wafers that incorporate the signal pins as well as strip-line shielding. The shielding allows 100% of the signal pins to be used for signal transmission. Accommodates micro coaxial, micro twisted pair and micro twin axial cable constructions.

*VHDMisatrademarkofAmphenolCorporation

2.5 Gbps 100 real signals/inch

Contact Molex

•Data/Communications•Networking•Telecommunications

Impact™ cable assemblies use a low-impedance, localised ground-return path in an optimised differential-pair array. Shielded and isolated, the pairs are tightly coupled to, and surrounded by, ground structures, leading to reduced cross-talk and increased overall bandwidth performance, with minimal performance variance across the system.

25 Gbps 80 diff pair/inch

Contact Molex

•Data/Communications•Telecommunications

Impact™ Cable Assemblies

VHDM* Cable Assemblies

Backplane ConnectorsCable Assemblies

36 www.molex.com

Product Name Description Pitch (mm) Series Conn T&R

(Tray)ContactPlating

TailPlating

H(mm)

Depth(mm)

FPC T(mm)

Cable Type

Contact Pos.

Actuatortype

Voltage(V)

Current(A)

Temp.(min.)

Temp.(max.) Note

Ideal for tight-packaging applications, Molex’s line of FFC/FPC connectors come in various pitch options ranging from 0.20mm pitch up to 1.00mm and include features to meet a wide variety of space and usage needs for applications in all markets.

Molex’s FFC/FPC connectors are availablewithpushandflip-styleactuators, which are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. Molex is continuallydevelopinglower-profileand higher-density versions to meet the downsizing needs of electronic equipment makers.

Other features include Molex’s unique BackFlip™ actuator design, which provides easy cable insertion and extraction even in tight packaging applications, top, bottom and dual contact versions are available.

Through-hole versions are avai-lable in vertical and right-angle configurations,ZIFandnonZIFversions and various pitch options ranging from 1.00mm to 2.54mm. Circuit sizes range from 1 to 50.

0.20 503419 -0xx8 -0xx0 Au Au 0.9 2.85 0.2 FPC Bottom Frontflip 50 0.2 -40°C +85°C FPC with tabs

0.25502078

-xx18 -xx10Au Au 1.0 2.75 0.2 FPC Bottom Frontflip 50 0.2 -20°C +85°C

Low-Halogen

-xx68 -xx60 Longer actuator

503320 -xx68 -xx60 Au Au 1.65 2.98 0.2 FPC Bottom Frontflip 50 0.3 -40°C +85°C

0.30

502250 -xx20 -xx91

Au Au

0.9 4.19 0.2 FPC Dual Backflip 50 0.2 -25°C +85°CFPC with notches

-xx21 -xx92 Low-Halogen

503566 -xx08 -xx00 0.95 2.85 0,2 FPC Bottom Frontflip 50 0.2 -40°C +85°C FPC with tabs

502598 -xx11 -xx91 1.15 3.8 0.2 FPC Dual Backflip 50 0.2 -40°C +85°C

503425 -xx11 -xx91 1.2 4.6 0.2 FPC Dual Backflip 50 0.2 -40°C +85°C FPC with notches

501912 -xx10 -xx90 1.8 3.85 0.2 FPC Bottom Frontflip 50 0.2 -20°C +85°C

0.50RA0.50RA0.50

RA

501461 -xx09 -xx01 Au Au

0.8 3.2 0.12 FPC Bottom Backflip 50 0.3 -40°C +85°CFPC with notches

-xx08 -xx02 Au Au increased act lock F, 8ckt only

503480 -xx09 -xx00 Au Au 1.0 4.0 0.3 FFC/FPC Dual Back Flip 50 0.5 -40°C +85°C

51281 -xx30 -xx92 SnBi SnBi

1.2 4.05 0.3 FFC/FPC Dual Non ZIF 50 0.5 -20°C +85°C -xx40 -xx94 Au Au

54548 -xx19 -xx33 SnBi SnBi

1.2 3.85 0.3 FFC/FPC Bottom Pull up 50 0.5 -20°C +85°C -xx29 -xx71 Au Au

54550 -xx22 -xx33 SnAgBi SnAgBi

1.2 3.85 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx29 -xx71 Au Au

503366 -xx19 -xx11 Au Au 2.0 5.6 0.3 FFC/FPC Bottom Frontflip 50 0.5 -20°C +85°C FPC with tabs

52435 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.2 0.3 FFC/FPC Top Push pull 50 0.5 -40°C +85°C -xx29 -xx71 Au Au

52437 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.2 0.3 FFC/FPC Bottom Pull up 50 0.5 -40°C +85°C -xx29 -xx71 Au Au

52745 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.0 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx59 -xx97 Au Au

52746 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.0 0.3 FFC/FPC Bottom Pull up 50 0.5 -20°C +85°C -xx39 -xx71 Au Au

54104 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.6 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx29 -xx31 Au Au

54132 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.6 0.3 FFC/FPC Bottom Push pull 50 0.5 -20°C +85°C -xx68 -xx62 Au Au

502790 -xx11 -xx91 Au Au 2.5 5.3 0.3 FPC Bottom Frontflip 50 0.5 -20°C +85°C FPC with tabs, 2 contacts

502611 -xx29 -xx21 Au Au 3.9 7.9 0.3 FPC Bottom Front Flip 100 0.3 -10°C +100°C FPC with tabs

501864

-xx21 -xx80SnBi SnBi

4.85 8.0 0.3 FFC/FPC Bottom Jacket 50 0.3 -40°C +85°C

Jacket:501783,Cover:501784

-xx51 -xx81

-xx11 -xx90

Au Au-xx31 -xx91 Shield FFC

-xx41 -xx92 Sealing treat

FFC/FPC Connectors

FFC/FPC Connectors Core Micro Products

37www.molex.com

Product Name Description Pitch (mm) Series Conn T&R

(Tray)ContactPlating

TailPlating

H(mm)

Depth(mm)

FPC T(mm)

Cable Type

Contact Pos.

Actuatortype

Voltage(V)

Current(A)

Temp.(min.)

Temp.(max.) Note

Ideal for tight-packaging applications, Molex’s line of FFC/FPC connectors come in various pitch options ranging from 0.20mm pitch up to 1.00mm and include features to meet a wide variety of space and usage needs for applications in all markets.

Molex’s FFC/FPC connectors are availablewithpushandflip-styleactuators, which are pre-assembled covers that secure the connection between the FFC/FPC and the connector terminals. Molex is continuallydevelopinglower-profileand higher-density versions to meet the downsizing needs of electronic equipment makers.

Other features include Molex’s unique BackFlip™ actuator design, which provides easy cable insertion and extraction even in tight packaging applications, top, bottom and dual contact versions are available.

Through-hole versions are avai-lable in vertical and right-angle configurations,ZIFandnonZIFversions and various pitch options ranging from 1.00mm to 2.54mm. Circuit sizes range from 1 to 50.

0.20 503419 -0xx8 -0xx0 Au Au 0.9 2.85 0.2 FPC Bottom Frontflip 50 0.2 -40°C +85°C FPC with tabs

0.25502078

-xx18 -xx10Au Au 1.0 2.75 0.2 FPC Bottom Frontflip 50 0.2 -20°C +85°C

Low-Halogen

-xx68 -xx60 Longer actuator

503320 -xx68 -xx60 Au Au 1.65 2.98 0.2 FPC Bottom Frontflip 50 0.3 -40°C +85°C

0.30

502250 -xx20 -xx91

Au Au

0.9 4.19 0.2 FPC Dual Backflip 50 0.2 -25°C +85°CFPC with notches

-xx21 -xx92 Low-Halogen

503566 -xx08 -xx00 0.95 2.85 0,2 FPC Bottom Frontflip 50 0.2 -40°C +85°C FPC with tabs

502598 -xx11 -xx91 1.15 3.8 0.2 FPC Dual Backflip 50 0.2 -40°C +85°C

503425 -xx11 -xx91 1.2 4.6 0.2 FPC Dual Backflip 50 0.2 -40°C +85°C FPC with notches

501912 -xx10 -xx90 1.8 3.85 0.2 FPC Bottom Frontflip 50 0.2 -20°C +85°C

0.50RA0.50RA0.50

RA

501461 -xx09 -xx01 Au Au

0.8 3.2 0.12 FPC Bottom Backflip 50 0.3 -40°C +85°CFPC with notches

-xx08 -xx02 Au Au increased act lock F, 8ckt only

503480 -xx09 -xx00 Au Au 1.0 4.0 0.3 FFC/FPC Dual Back Flip 50 0.5 -40°C +85°C

51281 -xx30 -xx92 SnBi SnBi

1.2 4.05 0.3 FFC/FPC Dual Non ZIF 50 0.5 -20°C +85°C -xx40 -xx94 Au Au

54548 -xx19 -xx33 SnBi SnBi

1.2 3.85 0.3 FFC/FPC Bottom Pull up 50 0.5 -20°C +85°C -xx29 -xx71 Au Au

54550 -xx22 -xx33 SnAgBi SnAgBi

1.2 3.85 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx29 -xx71 Au Au

503366 -xx19 -xx11 Au Au 2.0 5.6 0.3 FFC/FPC Bottom Frontflip 50 0.5 -20°C +85°C FPC with tabs

52435 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.2 0.3 FFC/FPC Top Push pull 50 0.5 -40°C +85°C -xx29 -xx71 Au Au

52437 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.2 0.3 FFC/FPC Bottom Pull up 50 0.5 -40°C +85°C -xx29 -xx71 Au Au

52745 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.0 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx59 -xx97 Au Au

52746 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.0 0.3 FFC/FPC Bottom Pull up 50 0.5 -20°C +85°C -xx39 -xx71 Au Au

54104 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.6 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx29 -xx31 Au Au

54132 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.6 0.3 FFC/FPC Bottom Push pull 50 0.5 -20°C +85°C -xx68 -xx62 Au Au

502790 -xx11 -xx91 Au Au 2.5 5.3 0.3 FPC Bottom Frontflip 50 0.5 -20°C +85°C FPC with tabs, 2 contacts

502611 -xx29 -xx21 Au Au 3.9 7.9 0.3 FPC Bottom Front Flip 100 0.3 -10°C +100°C FPC with tabs

501864

-xx21 -xx80SnBi SnBi

4.85 8.0 0.3 FFC/FPC Bottom Jacket 50 0.3 -40°C +85°C

Jacket:501783,Cover:501784

-xx51 -xx81

-xx11 -xx90

Au Au-xx31 -xx91 Shield FFC

-xx41 -xx92 Sealing treat

FFC/FPC Connectors Core Micro Products

38 www.molex.com

Pitch (mm) Series Conn T&R

(Tray)ContactPlating

TailPlating

H(mm)

Depth(mm)

FPC T(mm)

Cable Type Contact Pos. Actuator

typeVoltage

(V)Current

(A)Temp.(min.)

Temp.(max.) Note

0.20 503419 -0xx8 -0xx0 Au Au 0.9 2.85 0.2 FPC Bottom Frontflip 50 0.2 -40°C +85°C FPC with tabs

0.25502078

-xx18 -xx10Au Au 1.0 2.75 0.2 FPC Bottom Frontflip 50 0.2 -20°C +85°C

Low-Halogen

-xx68 -xx60 Longer actuator

503320 -xx68 -xx60 Au Au 1.65 2.98 0.2 FPC Bottom Frontflip 50 0.3 -40°C +85°C

0.30

502250 -xx20 -xx91

Au Au

0.9 4.19 0.2 FPC Dual Backflip 50 0.2 -25°C +85°CFPC with notches

-xx21 -xx92 Low-Halogen

503566 -xx08 -xx00 0.95 2.85 0.2 FPC Bottom Frontflip 50 0.2 -40°C +85°C FPC with tabs

502598 -xx11 -xx91 1.15 3.8 0.2 FPC Dual Backflip 50 0.2 -40°C +85°C

503425 -xx11 -xx91 1.2 4.6 0.2 FPC Dual Backflip 50 0.2 -40°C +85°C FPC with notches

501912 -xx10 -xx90 1.8 3.85 0.2 FPC Bottom Frontflip 50 0.2 -20°C +85°C

0.50RA0.50RA0.50

RA

501461 -xx09 -xx01 Au Au

0.8 3.2 0.12 FPC Bottom Backflip 50 0.3 -40°C +85°CFPC with notches

-xx08 -xx02 Au Au increased act lock F, 8ckt only

503480 -xx09 -xx00 Au Au 1.0 4.0 0.3 FFC/FPC Dual Back Flip 50 0.5 -40°C +85°C

51281 -xx30 -xx92 SnBi SnBi

1.2 4.05 0.3 FFC/FPC Dual Non ZIF 50 0.5 -20°C +85°C -xx40 -xx94 Au Au

54548 -xx19 -xx33 SnBi SnBi

1.2 3.85 0.3 FFC/FPC Bottom Pull up 50 0.5 -20°C +85°C -xx29 -xx71 Au Au

54550 -xx22 -xx33 SnAgBi SnAgBi

1.2 3.85 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx29 -xx71 Au Au

503366 -xx19 -xx11 Au Au 2.0 5.6 0.3 FFC/FPC Bottom Frontflip 50 0.5 -20°C +85°C FPC with tabs

52435 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.2 0.3 FFC/FPC Top Push pull 50 0.5 -40°C +85°C -xx29 -xx71 Au Au

52437 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.2 0.3 FFC/FPC Bottom Pull up 50 0.5 -40°C +85°C -xx29 -xx71 Au Au

52745 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.0 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx59 -xx97 Au Au

52746 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.0 0.3 FFC/FPC Bottom Pull up 50 0.5 -20°C +85°C -xx39 -xx71 Au Au

54104 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.6 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx29 -xx31 Au Au

54132 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.6 0.3 FFC/FPC Bottom Push pull 50 0.5 -20°C +85°C -xx68 -xx62 Au Au

502790 -xx11 -xx91 Au Au 2.5 5.3 0.3 FPC Bottom Frontflip 50 0.5 -20°C +85°C FPC with tabs, 2 contacts

502611 -xx29 -xx21 Au Au 3.9 7.9 0.3 FPC Bottom Front Flip 100 0.3 -10°C +100°C FPC with tabs

501864

-xx21 -xx80SnBi SnBi

4.85 8.0 0.3 FFC/FPC Bottom Jacket 50 0.3 -40°C +85°C

Jacket:501783,Cover:501784

-xx51 -xx81

-xx11 -xx90

Au Au-xx31 -xx91 Shield FFC

-xx41 -xx92 Sealing treat

FFC/FPC Connectors Core Micro Products

39www.molex.com

Pitch (mm) Series Conn T&R

(Tray)ContactPlating

TailPlating

H(mm)

Depth(mm)

FPC T(mm)

Cable Type Contact Pos. Actuator

typeVoltage

(V)Current

(A)Temp.(min.)

Temp.(max.) Note

0.20 503419 -0xx8 -0xx0 Au Au 0.9 2.85 0.2 FPC Bottom Frontflip 50 0.2 -40°C +85°C FPC with tabs

0.25502078

-xx18 -xx10Au Au 1.0 2.75 0.2 FPC Bottom Frontflip 50 0.2 -20°C +85°C

Low-Halogen

-xx68 -xx60 Longer actuator

503320 -xx68 -xx60 Au Au 1.65 2.98 0.2 FPC Bottom Frontflip 50 0.3 -40°C +85°C

0.30

502250 -xx20 -xx91

Au Au

0.9 4.19 0.2 FPC Dual Backflip 50 0.2 -25°C +85°CFPC with notches

-xx21 -xx92 Low-Halogen

503566 -xx08 -xx00 0.95 2.85 0.2 FPC Bottom Frontflip 50 0.2 -40°C +85°C FPC with tabs

502598 -xx11 -xx91 1.15 3.8 0.2 FPC Dual Backflip 50 0.2 -40°C +85°C

503425 -xx11 -xx91 1.2 4.6 0.2 FPC Dual Backflip 50 0.2 -40°C +85°C FPC with notches

501912 -xx10 -xx90 1.8 3.85 0.2 FPC Bottom Frontflip 50 0.2 -20°C +85°C

0.50RA0.50RA0.50

RA

501461 -xx09 -xx01 Au Au

0.8 3.2 0.12 FPC Bottom Backflip 50 0.3 -40°C +85°CFPC with notches

-xx08 -xx02 Au Au increased act lock F, 8ckt only

503480 -xx09 -xx00 Au Au 1.0 4.0 0.3 FFC/FPC Dual Back Flip 50 0.5 -40°C +85°C

51281 -xx30 -xx92 SnBi SnBi

1.2 4.05 0.3 FFC/FPC Dual Non ZIF 50 0.5 -20°C +85°C -xx40 -xx94 Au Au

54548 -xx19 -xx33 SnBi SnBi

1.2 3.85 0.3 FFC/FPC Bottom Pull up 50 0.5 -20°C +85°C -xx29 -xx71 Au Au

54550 -xx22 -xx33 SnAgBi SnAgBi

1.2 3.85 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx29 -xx71 Au Au

503366 -xx19 -xx11 Au Au 2.0 5.6 0.3 FFC/FPC Bottom Frontflip 50 0.5 -20°C +85°C FPC with tabs

52435 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.2 0.3 FFC/FPC Top Push pull 50 0.5 -40°C +85°C -xx29 -xx71 Au Au

52437 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.2 0.3 FFC/FPC Bottom Pull up 50 0.5 -40°C +85°C -xx29 -xx71 Au Au

52745 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.0 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx59 -xx97 Au Au

52746 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.0 0.3 FFC/FPC Bottom Pull up 50 0.5 -20°C +85°C -xx39 -xx71 Au Au

54104 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.6 0.3 FFC/FPC Top Push pull 50 0.5 -20°C +85°C -xx29 -xx31 Au Au

54132 -xx22 -xx33 SnAgBi SnAgBi

2.0 5.6 0.3 FFC/FPC Bottom Push pull 50 0.5 -20°C +85°C -xx68 -xx62 Au Au

502790 -xx11 -xx91 Au Au 2.5 5.3 0.3 FPC Bottom Frontflip 50 0.5 -20°C +85°C FPC with tabs, 2 contacts

502611 -xx29 -xx21 Au Au 3.9 7.9 0.3 FPC Bottom Front Flip 100 0.3 -10°C +100°C FPC with tabs

501864

-xx21 -xx80SnBi SnBi

4.85 8.0 0.3 FFC/FPC Bottom Jacket 50 0.3 -40°C +85°C

Jacket:501783,Cover:501784

-xx51 -xx81

-xx11 -xx90

Au Au-xx31 -xx91 Shield FFC

-xx41 -xx92 Sealing treat

FFC/FPC Connectors Core Micro Products

40 www.molex.com

Style Description Number of Ports Catagory Circuits /

Contacts Applications

Available with and without shielding in through-hole or SMT mounting. Optional integrated LED‘s or light pipes also available. Mounting options include inboard or outboardfittingnails.Invertedtypesandtypeswith RJ11 keep out features also available. Standard and low profileversionsandgoldandpalladiumnickel/goldflashplatingisoffered.

1, 2, 3, 4, 5, 6, 8, 12, 16

3, 5, 5e, 6

4/2, 4/4, 6/2, 6/4, 6/6, 8/2, 8/4, 8/6, 8/8, 8/10

•Telecom•Networking•Medical•Consumer•Data/Computing

Available with and without shielding in through-hole or SMTmountingwithflushorflangedpaneloptions.Lowprofile(12.70mmheight)versionsandtypeswithSMTsolder tabs for increased board retention.A single port bottom entry type is also availabe for space constrained applications. Gold or palladium nickel /goldflashplatingisoffered.

1 3, 5

4/2, 4/4, 6/2, 6/4, 6/6, 8/2, 8/4, 8/6, 8/8, 8/10

•Telecom•Networking•Medical•Consumer•Data/Computing

Magnetic modular jacks, available in single- and multi-port versions, simplify customer board layouts by reducing the number of components required. All parts are IEEE 802.3 compilant and hence Ethernet 10/100/1000 compatible. Available with or without integratedLED’sandalsoavailabeinlow-profile13.45mm heights.

1, 8, 12Gigabit

Magnetics8/8

•Telecom•Networking•Medical•Consumer•Data/Computing

Molex offers a range of Integrated Jacks or ICMs that provide a cost-effective, plug-and-play solution for customers implementing PoE and PoE Plus (PoE+). Available in single port (1-by-1), 8-port (2-by-4), and 12-port(2-by-6)configurationsandwithLEDoptions,the ICMs provide PoE+ Power Source Equipment (PSE) capability.

1, 8, 12PSE - PoE+

8/8

•Telecom•Networking•Medical•Consumer•Data/Computing

PDJack™ with integrated ‘Power Device’ controllercircuitryplusEthernetconnectivitysimplifiesPoEPlusimplementation for any network device. The PDJack supplies 54 V of power up to 25.5 watts. Two pins output power and standard signal pins provide Ethernet connectivity. Additional pins allow power-up of external DC to DC converter.

1PD – PoE+

8/8

•Telecom•Networking•Medical•Consumer•Data/Computing

Right Angle

PoE PD Magnetic Jacks

Vertical

Right Angle with Magnetics

PoE / PoE+ Magnetic Jacks

Modular Jacks

41www.molex.com

Product Name Description

•An all-weather solderless terminal•Provides waterproof crimp connections•NiAc™ heat-shrinkable insulation

•Solutions for splicing and tapping of magnet and aluminum wire•Terminates magnet wire without removing insulation•Open barrel permits easy access

•WireAWG:10-22•Available in non-insulated, PVC insulated and nylon insulated wires•Provides a reliable, vibration-proof connection

•WireAWG:8AWG-250MCM•Available with or without tin plating•For heavy-duty 600V applications

•WireAWG:22AWG-600MCM•Seamless crimp barrel•Heavy-dutyterminalswithtinplating

•High-quality,seamless-barrelmetricringterminals•Insulated Avikrimp™ and un-insulated VersaKrimp™ seamless barrel types•Suitable for terminations using metric studs up to 10mm in diameter and wire size up to 6mm²

•Designed for high-temperature applications from +343 to +649°C•Nickle-plated copper•Butt seamed and barrel styles

Perma-Seal™

VersaKrimp™

MagKrimp™

Metric Ring Terminals

Wire Pins

High Temperature Terminals and Splices

Battery Cable Lugs

Solderless Terminals

42 www.molex.com

Product Name Description

•Currentrating:10.0A•WireGauge:12to30AWG•Voltagerating:300V•Circuits:2to24•Pitch:4.00to5.00mm•Operatingtemperature:-40to+115°C•ULFileNo.:E48521

•Currentrating:12.0to15.0A•WireGauge:12to22AWG•Voltagerating:300V•Circuits:3to24•Pitch:3.81to5.08mm•Operatingtemperature:-40to+120°C•ULFileNo.:E48521

•Currentrating:20.0to115.0A•WireGauge:11to30AWG•Voltagerating:300Vor600V•Circuits:2to16•Pitch:5.08to15.00mm•Operatingtemperature:-40to+130°C•ULFileNo.:E48521

•Currentrating:85.0A•WireGauge:3to14AWG•Voltagerating:600V•Circuits:2to12•Pitch:12.00mm•Operatingtemperature:-40to+130°C•ULFileNo.:E48521

•Currentrating:20.0to63.0A•WireGauge:6to22AWG•Voltagerating:300Vor600V•Circuits:2to12•Pitch:8.00to15.00mm•Operatingtemperature:-40to+105°C•ULFileNo.:E48521

•Currentrating:8.0to30.0A•WireGauge:12to30AWG•Voltagerating:300V•Circuits:2to48•Pitch:3.50to9.53mm•Operatingtemperature:-40to+115°C•ULFileNo.:E48521

•Currentrating:10.0to65.0A•WireGauge:8to30AWG•Voltagerating:300Vor600V•Circuits:2to32•Pitch:6.37to17.48mm•ULFileNo.:E48521

Positive Locking System

Eurostyle™ Two-Screw Terminal Strips

Beau™ EuroMate™ Pluggable

Eurostyle™ PCB Pluggable

Beau™ Eurostyle™ High-Power Fixed Mount

Beau™ Barrier Strips

EuroMax™ Pluggable High-Power

Terminal Blocks

43www.molex.com

RF Microminiature & Subminiature Products

RF Miniature, Medium and Large Products

44 www.molex.com

SealedConnectors

Product Name Description Pitch CurrentRating

Circuits Size Applications

The pre-assembled, fully-submersible MX150™ family is available with housing matte seals or cable seals. It offers a reduced package size and is ideal for SAE- and ISO-stylewireinsingle-anddual-rowconfigurationssupporting both signal and power applications up to 22.0A. Features include integral TPA and optional CPA.

3.50mm 22.0A 2- 20•Automotive•Commercial Vehicle

Offered in wire-to-wire, wire-to-panel and wire-to-boardconfigurations,theIP67-ratedMX150L™systemprovidesdesignflexibilityforlowlevelsignaltohighpower applications. Key features include pre-assembled connector housings, integral TPA and two-way mat seal on mating connector, sealed panel-mount plugs and proven blade-type terminals.

5.84mm, 7.62mm

Up to 18.0A and

40.0A

2-16•Commercial Vehicle•Consumer•Industrial Automation

The MX123™ is a fully sealed, high-performance connection system designed for transportation power-train applications in the most challenging under-hood environments. Features include integral TPA and CPA, lever ‘mate assist’ receptacles and ‘anti-scoop’ housings topreventterminaldamage.Headersanddresscoverscomplete the range.

2.54mm 25.0A Max

56, 66, 73, 80,

•Automotive•Commercial Vehicle

High-densityallopticalMXL38999™providesMIL-DTL-38999 solutions for APC, UPC single mode and PC multi-mode applications. The connectors include precision-machined and plated all-metallic inserts with zero plastic distortion. Available in all standard shell materials and plating options. Designed with Molex’s LumaCore™ optical terminus technology.

N/A N/A 4 - 64

•Industrial Automation•Military/Aerospace•Networking•Telecommunications

The Sealed SFP (Small Form-factor Pluggable) assembly is an optical and electrical-integrated connection system, designed to maximize valuable real estate on the PCB while providing an environmentally rugged interface rated to IP67. Compatible with ODVA optical and copper assemblies.

N/A N/A N/A

•Data/Communications•Industrial Automation•Networking•Telecommunications

Molex’s IP67 and NEMA 6P rated Industrial type A and type B Universal Serial Bus (USB) connectors are ideal for industrial and harsh commercial applications. The rugged plug and receptacle designs feature bayonet-style latches, encapsulated PCB receptacles and fully shielded cable assemblies to help keep out dust, debris and water.

N/A N/A N/A•Industrial Automation•Medical

The IP67 rated Extra Rugged Circular (XRC™) system includes plastic plugs and receptacles and new low-insertion-force stamped terminals. Features include tactile and audible mating feedback, visual markings on outer shell, seal retainer collar, imprinted wire seals and bayonet-latch design in shell sizes 18 (14 contact) and 24 (31 contact) types.

N/A13.0A Max

14, 31•Automotive•Commercial Vehicle

Molex’s SRC (Sealed Rectangular Connectors), with single-handed blind-mate functionality offer a hybrid, high power-and-signal, high circuit-count interface for harsh applications in commercial vehicles. The SRC system uses proven MX150™ terminals with current ratings up to 18.0A and MX150L™ terminals with current ratings up to 40.0A.

4.20mm 40.0A max 38, 66, 84•Commercial Vehicle•Industrial

SRC

MXL38.9.9.9.™

MX150™

Sealed SFP

MX150L™

Industrial USB

MX123™

XRC™

45www.molex.com

SealedConnectors

Product Name Description Pitch CurrentRating

Circuits Size Applications

Mizu-P25™ wire-to-wire connector system is IP67 certified.Thefamilyincludessystemsratedupto125 V and 250 V. Due to their small dimensions both systems are ideal for wire-to-wire applications in confinedspaces.Otherfeaturesincludepositivelocking,polarisation and special terminal designs for high vibration applications.

2.50mm 3.0/4.0A 2-4

•Automotive•Commercial Vehicle•Consumer•Industrial

TheMolexfamilyofCMCHybridConnectorsprovidesa sealed, high-density, modular and cost-effective connection system for heavy-duty, powertrain and body-electronics applications in the transportation industry. Traditionally a wire-to-board system, Molex has recently introduced a 32-circuit wire-to-wire version and new 28-circuit R/A headers.

Various2.5 - 26.0A

(PowerBlade)

22 - 154•Automotive•Commercial Vehicle•Industrial

Robust, high-density CMX connectors provide IP6K9K interfacial-seal protection in a compact, cost-effective lean design for electronic control units and other wire-to-board transportation applications. Features include a robust TPA™ design, different color codings and polarisation, lever-actuated movable seal protector and sealing dummy cavity plugs.

2.50mm 3.70mm 7.50A max 55, 65 •Automotive

•Commercial Vehicle

MIL-T-7928 approved Perma-Seal™ terminals and splices give long-lasting, moisture-proof connections that withstand corrosive compounds and heat. The NiAc™ insulation material (shrinks up to 40% faster thancomparablenylon/polyolefinproducts)andspecialhot-melt adhesive used in the inner wall of the sleeve provide a tough and durable seal.

N/A N/A N/A

•Industrial Automation•Military/Aerospace•Networking•Telecommunications

The MXP120™ Sealed Connector System is a high-performance 1.20mm terminal in-line connection system for automotive and commercial vehicles. Female receptacles feature an integral locking-latch with bridge protection and independent secondary locking while the male connectors feature primary lock reinforcement.

4.00mm 13.0A 2, 6•Automotive•Commercial Vehicle•Consumer

Perma-Seal™

MXP120™

Mizu-P25™

CMC

CMX

46 www.molex.com

Product Name Description Angle CurrentRating

Circuits Size Applications

MolexoffersDDR3DIMMsocketsinlow-profileandvery-low-profileSMTandpress-fitaerodynamicversionswith2.40mmseatingplane,thatmaximiseairflowaroundmemorymodulesduringoperation,andultra-low-profileDDR3 DIMM sockets with 1.10mm seating plane for optimumdesignflexibility.AcceptsJEDECspecifications,ATCA recognised.

Vertical 25°

1.0A 240

•Data/Communications•Industrial•Medical•Networking•Telecommunications

DDR2 increases the data bandwidth over DDR by doubling the data fetch rate at the same bus frequency. It is able to deliver data throughput beyond 3.2 Gbps. Features include high-temperature thermoplastic housing, dual ejector latches, added contact wipe and beveled metal pins.

Vertical 25°

22.5°1.0A 200, 244

•Consumer•Data/Communications•Networking•Telecommunications

The MiniDIMM saves PCB real estate over full size DIMMs whilst ensuring the same reliable features. Features include card guide style latch, direct module insertion into connector, integral vibration damping, SMTfittingnailsatbothends,andstandardandreverseconfigurationsinvertical,angledandright-angledversions.

Vertical Right Angle

22.5°1.0A 200, 244

•Consumer•Networking•Telecommunications

FB DIMM combines the high-speed internal architecture of DDR2 with a bi-directional point-to-point serial memory interface which links each FB DIMM module together in a chain. The system is available in various coloroptionsandacceptsJEDECdefinedmodulestoensure 100% industry compatibility.

Vertical 28.5°

0.5A 240•Data/Communications•Networking

Molex’s DIMM modules feature high-temperature thermoplastic housing to withstand lead-free solder processing, dual ejector latches to ensure easy module insertion/removal with minimal micro-motion, added contact wipe for oxidation wipe-off and forklocks for secure PCB retention.

Vertical Right Angle

25°1.0A 168

•Consumer•Data/Communications•Networking•Telecommunications

MeetingJEDECspecifications,Molex’sDDR4high-speedsockets offer greater PCB real-estate and cost savings with excellent assembly-processing compatibility. The sockets feature high dimensional stability and excellent compatibility in lead-free and halogen-free technologies. Vertical

0.75A(Per pin)

288•Telecom•Datacom

DDR3 DIMM

DIMM

DDR4

DDR2 DIMM

MiniDIMM

Fully Buffered DIMM

Memory ModuleSockets

47www.molex.com

Product Name Description Pitch CurrentRating

Circuits Size Applications

Availableinvariousprofiles,Molex’spush-push,hingedand push-pull microSD* connectors reduce card sticking andmemorycardfly-out.Featuresincludeultrasmallsize, detect terminal with wiping function, metal shielding, gold-plated beveled contacts, solder nails and detect switch.

*microSD is a trademark of the SD Card Association

1.09mm 1.10mm 1.27mm

0.5A 8 / 9

•Automotive •Consumer•Data/Communications•Industrial•Medical

Molex‘s compact size, user-friendly SD memory card connectors provide space savings and features like push-push eject for smooth card extraction and with the newest design allowing the card to extend to 6.00mm outside the shell in the locked position. The family includes card polarisation features and gold-plated beveled contacts.

2.50mm 0.5A 9

•Automotive •Consumer•Data/Communications•Industrial•Medical

This combo connector enables the user to combine two connector form factors into one, thus saving space. Push-push reverse-mount microSD* with detect switch combined with push-pull normal-mount SIM provide designflexibilitywithleft-entryandright-entryversions.Reliablecoplanarityof0.1mmmaxafterreflowensuresassemblyprocessefficiency.

*microSD is a trademark of the SD Card Association

1.09mm 1.27mm

0.5A 16 / 18

•Automotive •Consumer•Data/Communications•Industrial•Medical

Molex’slow-profilemicro-SIMcardsocketscomein hinged, push-pull and push-push styles offering optimum space and cost-savings. Features include smallfootprintandlow-profileheight,terminal-beamdesign with gradual lead-in, anti-shorting feature, card polarisation and multiple soldering hold-down points.

1.35mm 1.40mm 2.54mm

0.5A 6 / 8

•Automotive •Consumer•Data/Communications•Industrial•Medical

Molex‘s SIM card connectors are made of high-temperature thermoplastic material and feature a range of standard options plus the ability to custom design partsinspecificapplications.Thenewblock-typedesignintegrates the SIM card into the mobile application via the connector.

1.09mm 1.27mm 2.54mm

0.5A 6, 8

•Automotive •Consumer•Data/Communications•Industrial•Medical

Molex offers ChipSIM connectors in standard and custom designs for both the connector and cardholder. Optionally, the connector comes with an active- or passive-latch mechanism, location tabs and various button designs and colors; the cardholder fascia is modifiableforshortercustomerassemblyprocess.

2.54mm 0.5A 6

•Automotive •Consumer•Data/Communications•Industrial•Medical

microSD*

SIM

SD

ChipSIM

microSD*/ SIM Combo

micro-SIM

Memory CardSockets

48 www.molex.com

Product Name Description

•Ground-plane independent design•Poly-flexible,double-sidedadhesivetapeonantenna•Robustcoaxialcabletoflexi-antennawithPullForceofover18.0N•Choice of several miniature coaxial cable length options

•Smallest on-ground plastic antenna in the market measuring only 3.00 by 3.00 by 4.00mm •No removal of ground layers from beneath the antenna needed•Fully SMD-compatible•Application of Laser Direct Structuring (LDS) chip antenna technology in manufacturing

•BuiltonproprietaryMobliquA™technologyenablesignificantantennavolumereduction•Balanced design minimises ground-plane effects•Minimumtotalradiationefficiencyof50%and67%(respectively)forthe868and915MHzbands•Poly-flexible,double-sidedadhesivetapeforeasypeel-and-stickmounting

•Totalaverageefficiencyof80%atthelowband(GSM850,GSM900)and70%atthehighband(GSM1800,GSM1900and LTE band-7)•Balanced design minimises ground-plane effects•Poly-flexibledouble-sidedadhesivetapeforeasypeel-and-stickmounting•Robustcoaxialcabletoflexi-antennawithapull-forceofover18N

•Simple 50 Ohm passive antenna interface provides complete CMMB band coverage•Internal antenna design enhances mobile device appearance•ProductisRoHScompliantandhalogen-freeforenvironmentalsustainability•Specially-designed housing slots reduce antenna radiation loss

2.4/5 GHz Wifi Standalone Antenna

Mobile TV Standard Antenna

2.4GHz Surface Mount Device (SMD) On Ground Antenna

8.68./9.15MHz ISM Standalone Antenna

Cellular 6 Band Standalone Antenna

Standard Antennas

49www.molex.com

Product Name Description

•MolexLEDArrayHoldersavailableforBridgelux*,Citizen†, Cree‡, Nichia and Sharp** •CertifiedandtestedtoUL496OLFB2lampholderspecification•SimplifiestheCOB(chiponboard)LEDinstallationprocess,reducingqualityconcernsassociatedwithother

installation methods such as hand solder• Compression contacts to power array provide a reliable electrical connection• Double-ended wire-trap terminal to attach power source, allows for wiring single or serial LED sequences to ensure easeofassemblyanddesignflexibility•NewelegantdesignfeaturesprovideacleanandfinishedlooktoCOBLEDarrayinstallation•MolexLEDholderdesignsaddresseveryaspectofCOBLEDinstallation:thermalmanagement,reliableelectrical

connection and optical requirement

•New designs available for Cree XLamp‡ series CXA1507, CXA1512, CXA2520, CXA2530•Mechanical attachment for directional optics (Optional CXA25)• Pre-load feature allows for attachment of COB LED to holder prior to attaching to heat sink, simplifying installation•Elegantdesignwithflatlandingsurfaceforsecondaryopticsandbeveledareatoallowforanuninterruptedbeam

pattern from lightsource •Hightemperaturethermalplastichousingtoresisthighheatenvironments

•Designed to accommodate Nichia L series COB LED arrays• Clearance provided around LED to easily incorporate secondary optics • Concealed wire trap cap protects electrical contacts and provides additional voltage isolation when incorporating metal reflectors•Hightemperaturethermalplastichousingtoresisthighheatenvironments

•Solderless connection design minimises handling of arrays during installation, greatly reducing the possibility of damage•Eliminates specialised operator training and solder-joint inspection•Vertical snap-to-mate connection enables a fast, easy and reliable connection to the LED array holder•Low-profile1.40mmconnectorheightprovidesaslimdesignforspace-limitedapplicationsandminimisesriskof

affecting light output•Positive-locklatchingfeatureprovidesanaudibleclicktoconfirmconnection•Availablein3wiregaugesandseverallengthoptionsfordesignflexibility(BridgeluxVero*exampleshowninphoto)

LED ArrayHolders

Cree ‡ LED ArrayHolders

Nichia LED ArrayHolders

Pico-EZmate™Harness

Solid StateLighting

* Bridgelux and Vero are trademarks or registered trademarks of Bridgelux, Inc.† Citizen is a registered trademark of Citizen Electronics Co., Ltd.‡ Cree and XLamp are registered trademarks of Cree, Inc. ** Sharp is a registered trademark of Sharp Electronics Corporation.

50 www.molex.com

Switch Technology Description

•Elegant design - Unique backlighting solution with seamless overlays allow for easy cleaning - Unlimited cosmetic options including colors, textures and backlighting•Robust and durable

- No moving parts to wear out; can sense through the protection of glass or thick plastic overlays - Resistant to harsh chemical exposure, the effects of EMI and contaminants on overlays - Can be sealed and protected from environmental effects•Designflexibility

- Circuit can be constructed using polyester, polyimide or PCB and can be mounted to curved surfaces -Shapeandsizeofbuttonscanbetailoredtocustomerspecifications

•Extremely reliable contact system withstands even the most rugged commercial environment•Dome designs are produced with auto-placement in mind to ensure product reliability•Lightweightandlowprofile;easytointegrateintosmallerandthinnerpackages

•Extremely resistant to shock and vibration; excellent for commercial applications•Durable to meet the needs of rugged and high-usage applications•Can be shielded to offer protection against static discharge and EMI/RFI

•Extremely reliable contact system that withstands even the most rugged commercial environment•Dome designs are produced with auto-placement in mind to ensure product reliability•Can be shielded to offer protection against static discharge and EMI/RFI

•Allowsadditionofsimpleelectroniccomponentsontotheflexibleswitchsubstrate,whichofteneliminatestheneedforan additional LED or display board mounted below the switch substrate•Washable and well-suited for medical, industrial and commercial applications•Can be shielded to offer protection against static discharge and EMI/RFI

•Combines both the switch contact system and custom electronics into one complete package, eliminating the need for an additional LED indicator board•Keypadcanbedesignedusingvariousinterfacesystems,suchas3-dimensional(rubberkeypad)buttonsorflatpanels•PCB substrate offers additional rigidity in front panel applications, which may eliminate the need for a metal backer

•Combines both the switch contact system and custom electronics into once complete package, eliminating the need for an additional motherboard or display board•Keypadcanbedesignedusingvariousinterfacesystems,suchas3-dimensional(rubberkeypad)buttonsorflatpanels•Can be shielded to offer protection against static discharge and EMI/RFI

•Insert molded contact system can be combined with molded assembly packages, which is well-suited for end products such as cellular telephone volume controls and special, sealed product applications•Front panel may be backlit by electroluminescent panels•Washable and well-suited for medical, industrial and commercial applications

Capacitive Sensing

Bonded Membrane Switch Assemblies

Metal Dome Arrays

Hybrid Switch Assemblies

Membrane Switches Non-Tactile

Control Panel Assemblies

Membrane Switches Tactile

Insert Molded Switch Assemblies

SwitchProducts

51www.molex.com

Switch Technology Description

•AlternativetoPCBsorpolyimide,whichreducesthecostandallowsprintedflexibletailintegrationaspartoftheswitchsubstrate•Eliminates the need for an additional interconnect method•Easytointegrateintolow-profileapplicationssoproductscanbedesignedintotightlycontrolledareas•Designers may add optional cosmetic enhancements such as rubber keypads or graphic overlays

SwitchProducts

Flexible Circuits

Application Tooling

CustomSolutions

Molex offers a wide variety of production equipment designed and tested to ensure a high quality electrical connection. From fully automatic equipment that provides productionflexibilityandworksinmostindustrystandardwireprocessorstosemi-automatic equipment and hand tools for prototyping, Molex offers the solution for all your application needs.

When it comes to investing in research and development, Molex is an industry leader. We know that by leveraging our internal product technology, we can drive acontinuoussupplyofinnovationdirectlytoyou.Ifyouarefacedwithaspecificchallenge that cannot be solved through our existing portfolio of connectors and integrated products, please contact Molex.

Getmoreinsightsat:www.molex.com

©2014 MolexOrder No. 987651-0991 Rev.1 EU/PDF/2015.08