Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
CAT.200.01.T.E For more information contact Cutler-Hammer at:
www.ch.cutler-hammer.com/catalog
12-73
January 2001
Molded Case Circuit Breakers
12
300 – 800 Amperes
M-Frame
Vol. 1, Ref. No. [0539]
Table 12-117. Types MDLB and HMDLB Electronic Circuit Breakers with Non-interchangeable Trip Units
1
1
Factory sealed, suitable for reverse feed application.
2
Ampere rating is established by rating plug.
Note:
Instruction Leaflet/FRED Number 29C111 for Breaker; 29C615 for MES Trip Unit
100% Rated Types CMDL and CHMDL Electronic Circuit Breakers with Non-interchangeable Trip Units
The NEC allows the breaker to be rated at 100% of its frame size in an assembly, provided that 90°C wire is applied at the 75°C ampacity. All 100% rated circuit breakers have electronic trip units. Order as individual components: breaker frame, trip unit, rating plug and terminals.
Table 12-118. 100% Rated Types CMDL and CHMDL Electronic Circuit Breakers with Non-interchangeable Trip Units
3
3
See
Table 12-119
below for prices.
4
Ampere rating is established by rating plug.
5
For AC use only.
Note:
Instruction Leaflet/FRED Number 29C111 for Breaker; 29C615 for MES Trip Unit
Table 12-119. 100% Rated Types CMDL and CHMDL Electronic Circuit Breakers with Non-interchangeable Trip Units Prices
Maximum Continuous Ampere Rating @ 40°C
2
Factory Assembled Circuit Breaker Consisting of Frame and Trip Unit
LS LSI LSG LSIG
CatalogNumber
PriceU.S. $
CatalogNumber
PriceU.S. $
CatalogNumber
PriceU.S. $
CatalogNumber
PriceU.S. $
3-Pole Standard Interrupting Capacity 600V AC Rated 50 kAIC @ 480V AC
800
MDLB3800T33W
6,900.
MDLB3800T32W
8,350.
MDLB3800T35W
9,210.
MDLB3800T36W
10,670.
3-Pole High Interrupting Capacity 600V AC Rated 65 kAIC @ 480V AC
800
HMDLB3800T33W
8,810. HMDLB3800T32W 10,260. HMDLB3800T35W 11,120. HMDLB3800T36W 12,580.
Maximum ContinuousAmpereRating@ 40°C 4
Circuit Breaker Frame Only Digitrip RMS 310 Trip Unit Only 5 Digitrip RMS 310 Trip Unit Only Terminals
Standard Inter-rupting Capacity50 kAIC @480V AC
High Interrupting Capacity 65 kAIC @ 480V AC
Standard Options Ampere Rating
Fixed Rating Plug
Adjustable Rating Plug
Adjustable Short Time Pickup with I2t Short Delay Ramp
Indepen-dently Adjustable Short Time Pickup and Delay Ground FaultProtection
Adjustable Short Time Pickup with I2t Short Delay and Ground Fault Protection
Indepen-dently Adjustable Short Time Pickup and Ground Fault Protection
Ampere Rating
Catalog Number Catalog Number Catalog Number
3-Pole800 CMDL3800F CHMDL3800F MES3800LS MES3800LSI MES3800LSG MES3800LSIG 400
500600700800
8MES400T8MES500T8MES600T8MES700T8MES800T
400/500/600/800A8MES800T
See Page 12-74for Standard and Optional Terminals
Catalog Number
PriceU.S. $
Catalog Number
PriceU.S. $
Catalog Number
PriceU.S. $
A8MES800TCHMDL3800FCMDL3800FMES3800LSMES3800LSG
168.6,360.4,620.3,235.5,550.
MES3800LSIMES3800LSIG8MES400T8MES500T8MES600T
4,685.7,010.
108.108.108.
8MES700T8MES800T———
108.108.
———
Discount Symbol . . . . . . . . . . . . . . . . . . . . . . . . . CB-2
TAB1203.fm Page 73 Wednesday, October 25, 2000 9:33 PM
12-68
For more information contact Cutler-Hammer at:
www.ch.cutler-hammer.com/catalog
CAT.200.01.T.E
January 2001
Molded Case Circuit Breakers
1212
300 – 800 Amperes
M-Frame
Vol. 1, Ref. No. [0534]
Contents
Description Page
Product Description
. . . . . . . . .
12-68
Technical Data and Specifications
. . . . . . . . .
12-68
Dimensions/Weights
. . . . . . . .
12-70
Product Selection
. . . . . . . . . . .
12-70
M-Frame
Typical M-Frame Circuit Breaker
Product Description
■
All M-Frame Circuit Breakers are HACR rated.
■
MDL-Frame circuit breakers are available as individual components (Frame, Trip Unit, Terminals), or factory assembled complete breakers.
■
M-Frame circuit breakers with non-interchangeable trip units are suitable for reverse feed use.
Technical Data and Specifications
Table 12-107. UL489/CSA Interrupting Capacity Ratings
1
1
Utilization category A circuit breakers.
2
2-pole or two poles of 3-pole circuit breaker. Thermal-magnetic trip units only, MDL, HMDL break-ers with electronic trip unit are not DC rated.
3
Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds at 22 kA.
Table 12-108. IEC 947-2 Interrupting Capacity Ratings
4
4
Utilization category A circuit breakers.
5
2-pole or two poles of 3-pole circuit breaker. Thermal-magnetic trip units only, MDL, HMDL break-ers with electronic trip unit are not DC rated.
6
Time constant is 3 milliseconds minimum at 10 kA and 8 milliseconds at 22 kA.
CircuitBreakerType
Number of Poles
Interrupting Capacity (Symmetrical Amperes) (kA)
Volts AC (50/60 Hz) Volts DC
23
240 480 600 250
MDLCMDL
2, 32, 3
6565
5050
2525
2222
HMDLCHMDL
2, 32, 3
100100
6565
3535
2525
CircuitBreakerType
Number of Poles
Interrupting Capacity — RMS Symmetrical Amperes (kA) I
CU
= I
CS
Volts AC (50/60 Hz) Volts DC
56
240 480 600 250
MDLCMDL
2, 32, 3
8585
5050
2020
2020
HMDLCHMDL
2, 32, 3
100100
6565
2525
2020
TAB1203.fm Page 68 Wednesday, October 25, 2000 9:33 PM
CAT.200.01.T.E For more information contact Cutler-Hammer at:
www.ch.cutler-hammer.com/catalog
12-69
January 2001
Molded Case Circuit Breakers
12
300 – 800 Amperes
M-Frame
Vol. 1, Ref. No. [0535]
MDL-Frame Digitrip Specifications
Table 12-109. Specifications
1
Adjust by rating plug. In = Rating Plug
Trip Unit Type Digitrip RMS 310
RMS Sensing Yes
Breaker Type
Frame MDL, CMDL, HMDL, CHMDL
Ampere Range 400 – 800A
Interrupting Rating @ 480V 50, 65 (kA)
Protection
Ordering Options LS, LSG LSI, LSIG
Fixed Rated Plug (In) Yes Yes
Overtemperature Trip Yes Yes
Long Delay Protection (L)
Adjustable Rating Plug (In) Yes Yes
Long Delay Pickup 0.5 – 1.0 (In)
1
0.5 – 1.0 (In)
1
Long Delay Time I
2
t 12 Seconds 12 Seconds
Long Delay Time I
4
t No No
Long Delay Thermal Memory Yes Yes
High Load Alarm No No
Short Delay Protection (S)
Short Delay Pickup 200 – 800% x (In) 200 – 800% x (In)
Short Delay Time I
2
t 100 ms No
Short Delay Time Flat No Inst – 300 ms
Short Delay Time Zone Selective Interlocking No No
Instantaneous Protection (I)
Instantaneous Pickup No 200 – 800% x (In)
Discriminator No No
Instantaneous Override Yes Yes
Ground Fault Protection (G)
Ground Fault Alarm No No
Ground Fault Pickup Varies by Frame Varies by Frame
Ground Fault Delay I
2
T No No
Ground Fault Delay Flat Inst – 500 ms Inst – 500 ms
Ground Fault Zone Selective Interlocking No No
Ground Fault Thermal Memory Yes Yes
System Diagnostics
Status LEDs Yes Yes
Cause of Trip LEDs No No
Magnitude of Trip Information No No
Remote Signal Contacts — Ground Alarm Yes Yes
System Monitoring
Digital Display No No
Current No No
Power and Energy No No
Power Quality — Harmonics No No
Power Factor No No
Communications
Cutler-Hammer PowerNet No No
Testing
Testing Method Test Set
TAB1203.fm Page 69 Wednesday, October 25, 2000 9:33 PM
12-70
For more information contact Cutler-Hammer at:
www.ch.cutler-hammer.com/catalog
CAT.200.01.T.E
January 2001
Molded Case Circuit Breakers
12
300 – 800 Amperes
M-Frame
Vol. 1, Ref. No. [0536]
Dimensions/Weights
Table 12-110. Dimensions in Inches (mm)
Table 12-111. Approximate Shipping Weight in Lbs. (Kg)
1
Thermal-magnetic only.
Product Selection
This information is presented only as an aid to understanding Catalog Numbers. It is not to be used to build Catalog Numbers for circuit breakers or trip units.
Table 12-112. Circuit Breaker/Frame Catalog Numbering System
2
Thermal-magnetic only.
Table 12-113. Thermal-Magnetic Trip Unit Catalog Numbering System
3
Thermal-magnetic only.
Number of Poles Width Height Depth
2, 3 8.250 (210)
16.000 (406)
4.062 (103)
BreakerType
Complete Breaker Frame Only Trip Unit
1
Number of Poles
2 3 2 3 2 3
MDL, HMDL(T/M T.U.)
26.5(12.0)
29(13.2)
24.5(11.1)
26(11.8)
2.5(1.1)
3(1.4)
MDL, HMDL(Elec. T.U.)
— 30(13.6)
— 26(11.8)
— 4(1.8)
M D L 3 8 0 0 F
Circuit Breaker/Frame Type
MDLHMDL
Number of Poles
2 = 2 Poles3 = 3 Poles
Circuit Breaker/Frame Ampere
Rating
300 2
350 2
400450500600700800
Suffix
F = Frame OnlyK = High Magnetic
Molded Case SwitchV = 50°C (Thermal-Magnetic
Trip Units Only)W = Without TerminalsX = Load Side Terminals
OnlyY = Line Side Terminals
Only
M T 3 8 0 0 T
Trip Unit Type
MTMES
Number of Poles
2 = 2 Poles3 = 3 Poles
Trip UnitRating/Plug
Ampere Rating
300 3
350 3
400450500600700800
Suffix
T = Thermal MagneticV = 50°C (Thermal-Magnetic
Trip Units Only)LS = Digitrip RMS 310LSI = Digitrip RMS 310LSG = Digitrip RMS 310LSIG = Digitrip RMS 310
TAB1203.fm Page 70 Wednesday, October 25, 2000 9:33 PM