Upload
halien
View
229
Download
0
Embed Size (px)
Citation preview
Universal scaffolding system plettac-pl PDM
Application
distribution
R
1
A characteristic feature of plettac PDM system is the use of wedge joint which provides quick and safe assembly. The connection of PDM joint is performed by sliding the transom head over the vertical standard rosette and inserting the wedge.
Plettac PDM modular scaffolding may be used as:
• spatial construction• facade scaffolding• working platforms at heights• supporting structures• mobile scaffolding• hanging scaffolding
In addition, based on PDM scaffolding we may built exterior stairways to create communication between scaffolding floors. Stairways may be used as free-standing construction or construction built into the modular scaffold PDM.
Advantages of modular PDM scaffolding:
• quick jointing technique • functionality of components• easy and quick assembly and disassembly• unlimited range of unusual designs constructions
This type of scaffolding may be combined with the frame system plettac PD 70/100.
Table of contents
Introduction
Steps for assembly
Examples of solutions
Horizontals
Bracing
Decks
Toeboards
Base Plate
Vertical Standards
2
2-3
4-5
7-9
9-10
11-13
14
14
6-7
Page
Side Brackets
Lattice, Girders
Couplers
Ties
Other
Staircases
15
15-16
18
18-19
19
17
distribution
R
2
Universal joint
It is possible to use O type transom, U type transom and PDM platform transom.
Scaffolding joint is created by sliding the head into the rosette and inserting the wedge into one of the holes. This protects the component from falling out or shifting. By gently tapping the wedge with a hammer we create a rigid connection between the components.
Fig. 1
Step 1 Step 2
Step 3 Step 4
Placing the base plates and specifying the distance of fields Installing transoms at the base and levelling
Installing standards and PDM platform transoms Installing vertical bracing
Introduction
Steps for assembly
distribution
R
3
Step 5
Installing transoms and bracing at the first level
Step 6
Installing PD deck
Step 7
Installing standards at the next level of scaffolding Properly assembled scaffolding
Step 8
Scaffolding in a corner arrangement
Step 9
Scaffolding with aluminium stairways
Step 10
Steps for assembly
distribution
R
4
Examples of solutions
Suspensions
Grouping of standards to reinforce load capacity
Fixation for Base Plate Fixation for Base Plate
Rack for making suspensions
Connection frame scaffolding with modular scaffolding
Free-standing stair tower Mobile scaffolding
Horizontal bracing
distribution
R
5
Examples of solutions
Steel Filler Deck Steel Filler Deck
PDM system can be used with a wide range of transoms Deck Retainer is available for each width
Toeboards may be installed in the Deck Retainer Intermediate Ledger allow field shortening
Posibility to use many Decks at the same time PDM system combines the advantages of various types of solutions
Vertical Standards
Vertical StandardThe main support component of the PDM scaffolding, with rosettes at every 0,5 m a fora maximum eight connections.
Ramy
50100150200250300400
3,20 kg5,40 kg7,70 kg9,90 kg
12,10 kg14,40 kg18,80 kg
PDM 100 050PDM 100 100PDM 100 150PDM 100 200PDM 100 250PDM 100 300PDM 100 400
Name Dimensions (cm) Weight Catalogue No.
Starting CollarEnables and easier basing out of the scaffoldbefore longer standards are used to build.
33 2,10 kg PDM 033 033
Base StandardSupport component with a Starting Collar.
66116216316416
4,20 kg6,50 kg
11,00 kg15,40 kg19,90 kg
PDM 110 066PDM 110 116PDM 110 216PDM 110 316PDM 110 416
distribution
R
6
Top StandardSupport component used mainly for building platforms and stages.
4696
196296396
2,10 kg4,30 kg8,80 kg
13,30 kg17,70 kg
PDM 120 046PDM 120 096PDM 120 196PDM 120 296PDM 120 396
Standard with bolted SpigotStandard used for building suspended scaffoldings.
50100150200250300400
3,90 kg6,50 kg8,70 kg
11,00 kg13,20 kg15,40 kg19,90 kg
PDM 130 050PDM 130 100PDM 130 150PDM 130 200PDM 130 250PDM 130 300PDM 130 400
Connecting Spigot for Vertical Standard 52 2,00 kg PDM 150 050
distribution
R
7
Vertical Standards
Ramy Name Dimensions (cm) Weight Catalogue No.
Suspended Scaffold Connector Used for increasing the resistance connections of suspended scaffolding joints.
50 3,00 kg PDM 160 050
Horizontals
LedgerConstruction element of the scaffolding, as well as guard rails.
Ramy
1525415074
110125139150175200250300
1,10 kg1,40 kg2,00 kg2,20 kg3,00 kg4,30 kg4,90 kg5,40 kg5,40 kg6,60 kg7,00 kg8,50 kg
10,10 kg
PDM 400 015PDM 400 025PDM 400 041PDM 400 050PDM 400 074PDM 400 110PDM 400 125PDM 400 139PDM 400 150PDM 400 175PDM 400 200PDM 400 250PDM 400 300
Name Dimensions (cm) Weight Catalogue No.
O type Double LedgerUsed to attach Decks with O type coupling.
150200250300
9,50 kg12,70 kg15,80 kg19,00 kg
PDM 411 150PDM 411 200PDM 411 150PDM 411 300
O type Intermediate Transom Tube - TubeMounted on O-transom is used for shortening of the field.
7475
100110139150200250300
3,80 kg3,90 kg4,80 kg5,00 kg6,20 kg6,60 kg8,30 kg
10,10 kg11,90 kg
PDM 420 074PDM 420 075PDM 420 100PDM 420 110PDM 420 139PDM 420 150PDM 420 200PDM 420 250PDM 420 300
O type Intermediate Transom Deck to Deck2-deck3-deck
Suspended between the decks is used for shortening of the field.
81113
3,80 kg5,00 kg
PDM 421 074PDM 421 110
O type Reinforced Transom 110Used to attach Decks with O type coupling.
110 5,00 kg PDM 411 110
Horizontals
Ramy Name Dimensions (cm) Weight Catalogue No.
distribution
R
8
O type Intermediate Transom Tube - Deck2-deck3-deck
Suspended between the decks and O-transom is used for shortening of the field.
83115
3,80 kg5,00 kg
PDM 422 074PDM 422 110
PDM Transom3-decks4-decks
Horizontal components of the scaffolding used for the assembly of PD decks.
110139
5,90 kg7,70 kg
PDM 424 110PDM 424 139
Double Transom PDMdeckUsed to attach s with PD coupling.
150200250300
9,80 kg12,70 kg15,80 kg18,60 kg
PDM 425 150PDM 425 200PDM 425 250PDM 425 300
Intermediate PDM Transom Deck to Deck2-deck3-deck
Suspended between the platforms is used for shortening of the field.
81113
3,70 kg4,80 kg
PDM 423 074PDM 423 110
Intermediate PDM ransom ube - eckT T D2-decks3-decksSuspended between the deck and transom is used for shortening of the field.
80112
3,70 kg4,90 kg
PDM 426 074PDM 426 110
PDM Transom1-deck2-deck
Horizontal components of the scaffolding used for the assembly of PD decks.
4074
2,10 kg3,20 kg
PDM 424 040PDM 424 074
distribution
R
9
Bracing
Vertical Brace H200Used for vertical bracing with tiltable wedgeconnection heads at both ends. Designed toreinforce the scaffold.
Ramy
74/75110139150200250300
8,20 kg8,50 kg9,00 kg9,20 kg
10,10 kg11,20 kg12,40 kg
PDM 300 074PDM 300 110PDM 300 139PDM 300 150PDM 300 200PDM 300 250PDM 300 300
Name Dimensions (cm) Weight Catalogue No.
U type PDM TransomHorizontal component of the scaffolding used for the assembly of U type PDM decks.
4174
113
9,80 kg12,70 kg15,80 kg
PDM 428 041PDM 428 074PDM 428 110
Double Transom U type PDMUsed to attach decks with U type PDM couplin.
150200250300
9,80 kg12,70 kg15,80 kg18,60 kg
PDM 429 150PDM 429 200PDM 429 250PDM 429 300
Deck Retainer of PDM Decks type UUsed for the protection of decksin U type PDM system.
74110139150200250300
2,70 kg3,30 kg3,90 kg4,10 kg5,00 kg5,90 kg6,80 kg
PDM 430 074PDM 110PDM 139
430430
PDM 430 150PDM 430 200PDM 430 250PDM 430 300
Deck Retainer of PDMUsed for the protection of decks.
74110139150200250300
2,70 kg3,30 kg3,90 kg4,10 kg5,00 kg5,90 kg6,80 kg
PDM 427 074PDM 427 110PDM 427 139PDM 427 150PDM 427 200PDM 427 250PDM 427 300
Horizontals
Ramy Name Dimensions (cm) Weight Catalogue No.
Vertical Brace H150Used for vertical bracing with tiltable wedgeconnection heads at both ends. Designed toreinforce the scaffold.
74/75110150200250300
6,70 kg7,10 kg7,90 kg9,10 kg
10,30 kg11,60 kg
PDM 310 074PDM 310 110PDM 310 150PDM 310 200PDM 310 250PDM 310 300
distribution
R
10
Vertical Brace Used for vertical bracing with tiltable wedgeconnection heads at both ends. Designed toreinforce the scaffold.
H100 74/75110125150200250300
5,30 kg5,90 kg6,30 kg6,90 kg8,20 kg9,60 kg
11,00 kg
PDM 320 074PDM 320 110PDM 320 125PDM 320 150PDM 320 200PDM 320 250PDM 320 300
Vertical Brace Used for vertical bracing with tiltable wedgeconnection heads at both ends. Designed toreinforce the scaffold.
H50 110150200250300
4,80 kg6,20 kg7,60 kg8,60 kg
10,60 kg
PDM 330 110PDM 330 150PDM 330 200PDM 330 250PDM 330 300
Horizontal BraceUsed for bracing the scaffold structure in the horizontal plane. Used in scaffolds where no system decks can be assembled.
74/75 x 11074/75 x 15074/75 x 200
100 x 200150 x 20074 x 250
100 x 250110 x 250139 x 250150 x 250200 x 25074 x 300
100 x 300110 x 300139 x 300150 x 300200 x 300250 x 300
4,60 kg6,00 kg7,50 kg7,80 kg8,60 kg9,00 kg9,30 kg9,30 kg9,80 kg
10,00 kg10,90 kg10,60 kg10,80 kg10,80 kg11,20 kg11,40 kg12,20 kg13,10 kg
PDM 340 100PDM 341 150PDM 342 074PDM 342 100PDM 342 150PDM 343 074PDM 343 100PDM 343 110PDM 343 139PDM 343 150PDM 343 200PDM 344 074PDM 344 100PDM 344 110PDM 344 139PDM 344 150PDM 344 200PDM 344 250
Bracing
Ramy Name Dimensions (cm) Weight Catalogue No.
distribution
R
11
Decks
O type Steel Deck B32Perforated deck with forged connectingclaws for O-profile.
Ramy
7,60 x 757,60 x 1007,60 x 1107,60 x 1257,60 x 1397,60 x 1507,60 x 2007,60 x 2507,60 x 300
7,20 kg7,10 kg9,10 kg9,80 kg
11,10 kg11,70 kg14,80 kg17,80 kg20,80 kg
PDM 203 075PDM 203 100PDM 203 110PDM 203 125PDM 203 139PDM 203 150PDM 203 200PDM 203 250PDM 203 300
O type Steel Filler Deck B24Perforated deck with forged connectingclaws for O-profil, used for close decking.
7,50 x 757,50 x 1007,50 x 1107,50 x 1507,50 x 2007,50 x 2507,50 x 300
7,00 kg8,20 kg8,90 kg
12,10 kg15,10 kg18,40 kg22,30 kg
PDM 201 075PDM 201 100PDM 201 110PDM 201 150PDM 201 200PDM 201 250PDM 201 300
O type Steel Filler DeckPerforated deck with forged connectingclaws for O-profil, used for close decking.
B14 7,50 x 757,50 x 1007,50 x 1107,50 x 1507,50 x 2007,50 x 2507,50 x 300
7,00 kg8,20 kg8,90 kg
12,10 kg15,10 kg18,40 kg22,30 kg
PDM 202 075PDM 202 100PDM 202 110PDM 202 150PDM 202 200PDM 202 250PDM 202 300
Steel DeckPerforated deck for PD system.
7,60 x 747,60 x 1107,60 x 1257,60 x 1507,60 x 2007,60 x 2507,60 x 300
6,10 kg8,20 kg9,30 kg
11,20 kg14,30 kg17,40 kg20,50 kg
PD 210 070PD 210 110PD 210 125PD 210 150PD 210 200PD 210 250PD 210 300
Steel Filler Deck B24Perforated steel deck for PD system,
.used for close decking
5 x 745 x 1105 x 1255 x 1505 x 2005 x 2505 x 300
4,70 kg6,70 kg7,90 kg
12,50 kg16,40 kg20,50 kg24,60 kg
PDM 211 074PDM 211 110PDM 211 125PDM 211 150PDM 211 200PDM 211 250PDM 211 300
Name Dimensions (cm) Weight Catalogue No.
distribution
R
12
Timber DeckImpregnated, waterproof, glued forPD system.
4,8 x 744,8 x 1104,8 x 1504,8 x 2004,8 x 250
5 x 300
6,20 kg8,40 kg
11,40 kg14,90 kg18,30 kg22,60 kg
PD 200 070PD 200 110PD 200 150PD 200 200PD 200 250PD 200 300
Alu Access Deck without Ladder 8,1 x 1508,1 x 200
16,00 kg16,60 kg
PDM 221 150PDM 221 200
Alu Access Deck w. Plywood Surface and LadderFor PDM scaffold.
7,3 x 2507,3 x 300
23,90 kg29,80 kg
PD 220 250PD 220 300
U type Steel DeckPerforated deck for U type PDM system.
8,1 x 748,1 x 1108,1 x 1508,1 x 2008,1 x 2508,1 x 300
5,60 kg7,60 kg
11,20 kg14,40 kg17,70 kg21,00 kg
PDM 204 074PDM 204 110PDM 204 150PDM 204 200PDM 204 250PDM 204 300
Alu Access Deck w. Plywood Surface and LadderFor U type PDM scaffold.
7,3 x 2507,3 x 300
23,90 kg29,80 kg
PDM 222 250PDM 222 300
Steel Filler Deck B15Perforated steel deck for PD system,used for close decking.
5 x 1505 x 2005 x 2505 x 300
9,40 kg12,50 kg15,60 kg18,70 kg
PDM 212 150PDM 212 200PDM 212 250PDM 212 300
Decks
Ramy Name Dimensions (cm) Weight Catalogue No.
Internal Ladder Steel 9,00 kg PDM 226 100
distribution
R
13
Alu Access Deck w. Plywood Surface w/o LadderFor PDM O type scaffold.
8,1 x 1508,1 x 200
16,00 kg16,60 kg
PDM 225 150PDM 225 200
Alu Access Deck w. Plywood Surface and LadderFor PDM O type scaffold.
7,3 x 2507,3 x 300
23,90 kg29,80 kg
PDM 224 250PDM 224 300
Internal Ladder Steel with Hooks 10,80 kg PDM 227 100
Alu Access Deck w. Plywood Surface w/o LadderFor PDM U type scaffold.
8,1 x 1508,1 x 200
16,00 kg16,60 kg
PDM 223 150PDM 223 200
Decks
Ramy Name Dimensions (cm) Weight Catalogue No.
Toeboards
Ramy
Toeboard for DecksImpregnated, with steel fittings. Mounted at theheight of the deck to complement the three-level protection of workplace as required by applicable regulations.
15 x 7415 x 11015 x 15015 x 20015 x 25015 x 300
1,80 kg2,40 kg3,20 kg4,10 kg5,00 kg5,90 kg
PD 500 074PD 500 110PD 500 150PD 500 200PD 500 250PD 500 300
Toeboard for Decks PDMImpregnated, with steel fittings. Mounted at theheight of the deck.
15 x 7415 x 11015 x 13915 x 15015 x 20015 x 25015 x 300
1,50 kg1,90 kg2,40 kg2,50 kg3,20 kg4,00 kg4,80 kg
PDM 510 074PDM 510 110PDM 510 139PDM 510 150PDM 510 200PDM 510 250PDM 510 300
Base Plate
Base PlateTubular spindle with round thread fitted withwing nut 15x15cm base plate.
Ramy
406080
100
2,25 kg3,00 kg3,50 kg4,30 kg
PD 070 040PD 070 060PD 070 080PD 070 100
Name Dimensions (cm) Weight Catalogue No.
Fixation for Base PlateUsed to secure base plates when liftingscaffold with crane.
60 3,10 kg PDM 070 120
Swivel Base PlateUsed on sloping areas.
56,80 6,10 kg PD 070 110
distribution
R
14
Name Dimensions (cm) Weight Catalogue No.
Side Brackets
O type Side BracketExtend the O type PDM scaffolding.
Ramy
4175
3,70 kg6,00 kg
PDM 620 041PDM 620 075
Lattice, Girders
Ramy Name Dimensions (cm) Weight Catalogue No.
PDM Lattice GirderEnables fast assembly of horizontal planes.
50 x 25050 x 30050 x 40050 x 45050 x 50050 x 60050 x 750
29,90 kg34,30 kg44,80 kg51,10 kg55,40 kg66,20 kg84,70 kg
PDM 831 250PDM 831 300PDM 831 400PDM 831 450PDM 831 500PDM 831 600PDM 831 750
Steel Lattice Girderheight 45 cm, made of a Ö 48,3 mm steel tube, hot-dip galvanized
length: length: length: length: length:
320420520620770
30,30 kg39,20 kg48,20 kg57,10 kg71,20 kg
PDM 830 320PDM 830 420PDM 830 520PDM 850 620PDM 850 770
U type Side BracketExtend the U type PDM scaffolding.
4175
3,70 kg6,00 kg
PDM 610 041PDM 610 075
PDM Side BracketExtend the PDM scaffolding.
4175
3,70 kg6,00 kg
PDM 600 040PDM 600 075
distribution
R
15
Steel Lattice Girderheight 45 cm, made of a 48,3 mm steel tube , hot-dip galvanized.
Ölength: 310length: 410length: 510length: 610length: 760
30,00 kg39,00 kg49,00 kg58,00 kg73,00 kg
PD 830 310 PD 830 410PD 830 510PD 850 610PD 850 760
Aluminium Lattice Girderheight 45 cm, made of a 48,3 mm aluminium tube.
Ölength: 310length: 410length: 510length: 610length: 810
12,00 kg15,50 kg19,60 kg23,00 kg30,30 kg
PD 840 310 PD 850 410PD 860 510PD 860 610PD 860 810
Name Dimensions (cm) Weight Catalogue No.
Lattice, Girders
Ramy
Aluminium Lattice Girderheight 45 cm, made of a Ö 48,3 mm aluminium tube
length: 320420520620770820
length: length: length: length: length:
12,60 kg16,30 kg19,90 kg23,60 kg29,40 kg31,20 kg
PD 880 320PD 880 420PD 880 520PD 880 620PD 880 770PD 880 820
Connecting Spigot Straight for Lattice Girderwith 4 connection bolts.Allows connection of lattice girders of different lengths.
2,20 kg PD 880 200
Connecting Spigot Curved for Lattice Girderupperlowerwith 4 connection bolts.Used for the construction of roofs, buildings and tents.
3,50 kg2,80 kg
PD 880 300PD 880 400
Special Bolt M12x70 with Self-Locking Nut 0,10 kg PDM 880 500
Support Spigot for Ledger with Couplerfor screw 22Mounted on girders or O-transoms to change the lenght of the field.
1,60 kg PDM 880 60030
Support Spigot for Ledger with Wedge JointMounted on girders or O-transoms to change the lenght of the field.. NOTE: Used also for U-transoms.
2,10 kg PDM 880 61036
distribution
R
16
Heavy Steel Lattice Girderheight 75 cm, made of a 48,3 mm steel tube, hot-dip galvanized
Ölength: 400length: 500length: 600length: 700
45,20 kg55,30 kg65,40 kg77,20 kg
PD 870 400 PD 870 500PD 870 600PD 870 700
Name Dimensions (cm) Weight Catalogue No.
Staircases
Ramy
O type Alu StaircaseFor comfortable climbing in to the scaffolding and transportation of materials.
200 x 65 x 250200 x 65 x 300
28,50 kg33,50 kg
PDM 251 250PDM 251 300
PD Alu StaircaseFor comfortable climbing in to the scaffolding and transportation of materials.
200 x 250200 x 300
27,50 kg32,50 kg
PD 250 250PD 250 300
Single Guard Rail for StaircaseProvides a safe entry and exit from the staircase.
250300
10,70 kg12,20 kg
PDM 253 250PDM 253 300
Stair Head Guard RailProvides a safe entry and exit from the stairway.
250300
12,00 kg14,40 kg
PD 260 250PD 260 300
Inner Guard RailProvides a safe entry and exit from the stairway.
250300
11,00 kg13,90 kg
PD 265 250PD 265 300
distribution
R
17
U type Alu StaircaseFor comfortable climbing in to the scaffolding and transportation of materials.
200 x 250200 x 300
27,50 kg32,50 kg
PDM 252 250PDM 252 300
Name Dimensions (cm) Weight Catalogue No.
Couplers
Double Couplerwith flanged nuts for tubes with an externaldiameter of 48,3 mm acc. to EN-74Ö
Ramy
1,00 kg PD 710 100
Swivel Couplerwith flanged nuts for tubes with an external diameter of Ö 48,3 mm acc. to EN-74
1,20g PD 710 110
Tension Couplerwith flanged nuts for tubes with an external diameter of 48,3 mmÖ
1,30g PD 710 120
Tube Connecting Spigotfor tubes with an external diameter of 48,3 mmÖ
1,30g PD 710 130
Toeboard BracketFor fitting toeboards where deck retainers are not needed.
1,10g PD 710 140
Ties
Name Dimensions (cm) Weight Catalogue No.
Scaffold Tie 1,70 kg2,00 kg2,80 kg4,00 kg4,80 kg
PD 700 040PD 700 050PD 700 080PD 700 110PD 700 130
length: length: length:
length: length:
305080
110150
Eyebolt 0,10 kg0,20 kg0,30 kg0,40 kg0,50 kg0,60 kg
PD 720 230PD 720 240PD 720 250PD 720 260PD 720 270PD 720 280
12 x 95120160190230350
12 x 12 x 12 x 12 x 12 x
distribution
R
18
L type Curved CouplerUsed for the suspension of lattice girders or steel structural elements, e.g. l-sections for scaffold structures.
1,10g PD 710 150
The scaffold must be tied to the building with resistant to tension and compression. The tie shall be made according to the mounting instructions. One anchoring point requires one spacer anchor with one double coupler or one anchor with two double couplers.
Name Dimensions (cm) Weight Catalogue No.
Ties
Expansion Anchor
Ramy
70 mm - PD 730 070
Plastic Cap PD 740 100
Other
Head Jack
Ramy
PDM 070 000
Name Dimensions (cm) Weight Catalogue No.
50 6,70 kg
Castor 1200 PD 880 5008,40 kg
Ratchet Spanner19/22
PD 710 1800,80 kg30
Stack Pallete PD 880 70042,20 kg116 x 66 x 93
Grid Box Palletefor small items
PD 880 71060,00 kg120 x 80 x100
distribution
R
19
85
Name Dimensions (cm) Weight Catalogue No.
distribution
RPlettac Distribution Sp. z o.o.
ul. Koœciuszki 31, 63-500 OstrzeszówTel. +48 62 586 06 40, fax +48 62 586 06 50
E-mail: [email protected] www.plettac.com.pl, www.rusztowanie.com
Commercial Department
Sales director
Tel. +48 602 488 589 [email protected]
Western region
Tel. +48 602 283 [email protected]
Central region
Tel. +48 602 283 [email protected]
Southern region
Tel. +48 602 632 [email protected]
Eastern region
Tel. +48 602 490 214 [email protected]