Modular Mini Fragment LCP System.2.0 mm, 2.4 mm and 2.7 mm instrument and implant modules.

Plates with locking compression technology

Locking andcortex screws

Instrumentsdesigned for usewith mini fragmentLCP implants

Synthes Modular Mini Fragment LCP System

The Modular Mini Fragment LCP System consists of 2.0 mm, 2.4 mmand 2.7 mm LCP instrument and implant module sets.

Plates– Low profile reduces soft tissue

irritation

– Cut-to-length feature minimizes inventory

– LCP (locking compression plate) holedesign for use with cortex or lockingscrews

– Available in implant-quality 316Lstainless steel and commercially pure(CP) titanium

Modular Mini Fragment LCP System

* Ti-6Al-7Nb

Locking screws– Self-tapping design for easy insertion

– Self-retaining StarDrive recess allowsimproved torque transmission and increased resistance to stripping

– Threaded head profile used with LCP plates creates a fixed-angle construct, particularly beneficialin osteopenic bone

– Available in implant-quality 316Lstainless steel and titanium alloy*

Cortex screws– Self-tapping design for easy insertion

– Self-retaining StarDrive recess allowsimproved torque transmission and increased resistance to stripping

– Available in implant-quality 316Lstainless steel and titanium alloy*

Indications

The Synthes Modular Mini FragmentLCP System is intended for fixation of fractures, osteotomies, nonunions,replantations, and fusions of smallbones and small bone fragments, particularly in osteopenic bone. Examples include, but are not limitedto, the hand, wrist, foot and ankle.

Synthes 1

2 Synthes Modular Mini Fragment LCP System

2.0 mm LCP Modular Mini Fragment Instrument and Implant Module Sets Stainless Steel (01.111.121) and Titanium (01.111.141)

Graphic Case60.111.001 2.0 mm LCP Module Case

Instruments310.201 2.0 mm Drill Bit, mini quick coupling,

65 mm, 2 ea.

310.507 1.5 mm Drill Bit with Depth Mark, mini quick coupling, 96 mm, 2 ea.

310.972 Countersink, for 2.0 mm/2.4 mm screws

313.843 2.0 mm Screwdriver Blade, self-retaining,StarDrive, long, 2 ea.

323.034 1.5 mm Threaded Drill Guide, with Depth Gauge, 2 ea.

329.921 Threaded Bending Pin, for 2.0 mm LCP Plates, 2 ea.

Implants2.0 mm Locking Screws, self-tapping, with T6 StarDrive recess, 3 ea.Stainless Steel Titanium Length (mm)201.876 401.876 6201.877 401.877 7201.878 401.878 8201.879 401.879 9201.880 401.880 10201.881 401.881 11201.882 401.882 12201.883 401.883 13201.884 401.884 14201.886 401.886 16201.888 401.888 18201.890 401.890 20201.892 401.892 22201.894 401.894 24201.896 401.896 26201.898 401.898 28201.900 401.900 30

Note: For additional information, please refer to package insert.

For detailed cleaning and sterilization instructions, please refer tohttp://www.synthes.com/sites/NA/MedicalCommunity/Pages/Cleaning_and_Sterilization.aspxor to the below listed inserts which will be included in the shipping container:—Processing Synthes Reusable Medical Devices—Instruments, Instrument Trays and Graphic

Cases—DJ1305—Processing Non-sterile Synthes Implants—DJ1304

Synthes 3

2.0 mm LCP Plates

Stainless Steel Titanium Holes Length (mm)

247.344 447.344 4 31247.345 447.345 5 38 247.346 447.346 6 45247.347 447.347 7 52247.348 447.348 8 59247.360 447.360 10 73

2.0 mm LCP Condylar Plate

Stainless Steel Titanium Description

247.349 447.349 7 holes shaft, 54 mm

2.0 mm LCP Adaption Plate

247.362 447.362 12 holes, 81 mm

2.0 mm LCP T-Plate

247.615 447.615 3 holes head, 7 holes shaft, 53 mm

Also Available03.111.010 1.5 mm LCP Solid Threaded Drill Guide,

for 2.0 mm LCP Plates

Stainless Steel Titanium Description247.350 447.350 2.0 mm LCP Y-Plate,

3 holes head, 7 holes shaft, 55 mm247.351 447.351 2.0 mm LCP T-Plate,

2 holes head, 7 holes shaft, 53 mm

304.106– Screw Length Markers (10/pkg), 6 mm–40 mm,304.140 6 mm–28 mm in 1 mm increments,

30 mm–40 mm in 2 mm increments

310.161 1.5 mm Drill Bit with Depth Mark, Stryker J-latch, 110 mm

310.203 2.0 mm Drill Bit, Stryker J-latch, 75 mm

Alternative Set Compatibility105.100 Modular Foot System

or

105.200/ Modular Hand System/

145.200 Titanium Modular Hand System

Implants continued

2.0 mm Cortex Screws, self-tapping, with T6 StarDrive recess, 3 ea.Stainless Steel Titanium Length (mm)201.356.97 401.356.97 6201.357.97 401.357.97 7201.358.97 401.358.97 8201.359.97 401.359.97 9201.360.97 401.360.97 10201.361.97 401.361.97 11201.362.97 401.362.97 12201.363.97 401.363.97 13201.364.97 401.364.97 14201.366.97 401.366.97 16201.368.97 401.368.97 18201.370.97 401.370.97 20201.372.97 401.372.97 22201.374.97 401.374.97 24201.375.97 401.375.97 26201.376.97 401.376.97 28201.377.97 401.377.97 30201.378.97 401.378.97 32201.379.97 401.379.97 34201.380.97 401.380.97 36201.381.97 401.381.97 38201.382.97 401.382.97 40

4 Synthes Modular Mini Fragment LCP System

2.4 mm LCP Modular Mini Fragment Instrument and Implant Module Sets Stainless Steel (01.111.122) and Titanium (01.111.142)

Graphic Case60.111.002 2.4 mm LCP Module Case

Instruments310.509 1.8 mm Drill Bit with Depth Mark,

quick coupling, 110 mm, 2 ea.

310.530 2.4 mm Drill Bit, quick coupling, 100 mm, 2 ea.

310.972 Countersink, for 2.0 mm/2.4 mm screws

314.467 StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.

323.029 1.8 mm Threaded LCP Drill Guide, withDepth Gauge, 2 ea.

329.922 Bending Pin, for 2.4 mm and 2.7 mmLocking Plates, 2 ea.

Implants

2.4 mm Locking Screws, self-tapping, with T8 StarDrive recess, 3 ea.Stainless Steel Titanium Length (mm)

212.806 412.806 6212.807 412.807 7212.808 412.808 8212.809 412.809 9212.810 412.810 10212.811 412.811 11212.812 412.812 12212.813 412.813 13212.814 412.814 14212.816 412.816 16212.818 412.818 18212.820 412.820 20212.822 412.822 22212.824 412.824 24212.826 412.826 26212.828 412.828 28212.830 412.830 30

Synthes 5

Implants continued

2.4 mm Cortex Screws, self-tapping, with T8 StarDriverecess, 3 ea.Stainless Steel Titanium Length (mm)

201.756 401.756 6201.757 401.757 7201.758 401.758 8201.759 401.759 9201.760 401.760 10201.761 401.761 11201.762 401.762 12201.763 401.763 13201.764 401.764 14201.766 401.766 16201.768 401.768 18201.770 401.770 20201.772 401.772 22201.774 401.774 24201.776 401.776 26201.778 401.778 28201.780 401.780 30201.782 401.782 32201.784 401.784 34201.786 401.786 36201.788 401.788 38201.790 401.790 40

2.4 mm LCP Plates

Stainless Steel Titanium Holes Length (mm)

249.674 449.674 4 36247.375 447.375 5 44249.676 449.676 6 52247.377 447.377 7 60249.678 449.678 8 68247.364 447.364 10 84

2.4 mm LCP Condylar Plate

Stainless Steel Titanium Description

249.679 449.679 7 holes shaft, 59 mm

2.4 mm LCP Adaption Plate

247.366 447.366 12 holes, 88 mm

2.4 mm LCP T-Plate

249.615 449.615 3 holes head, 7 holes shaft, 58 mm

Also Available03.111.011 1.8 mm LCP Solid Threaded Drill Guide,

for 2.4 mm LCP Plates

Stainless Steel Titanium Description

249.669 449.669 2.4 mm LCP Y-Plate, 3 holes head, 7 holes shaft, 60 mm

249.670 449.670 2.4 mm LCP T-Plate, 2 holes head, 7 holes shaft, 58 mm

304.106– Screw Length Markers (10/pkg), 6 mm–40 mm,304.140 6 mm–28 mm in 1 mm increments,

30 mm–40 mm in 2 mm increments

310.162 1.8 mm Drill Bit with Depth Mark, Stryker J-latch, 110 mm

317.872 2.4 mm Drill Bit, Stryker J-latch, 90 mm

Alternative Set/Instrument Compatibility105.100 Modular Foot System

or

105.200/ Modular Hand System/145.200 Titanium Modular Hand Systemand

311.43 Handle, with quick coupling

or

105.515/ 2.4 mm LCP Distal Radius Plate Instrumentand Implant Set

145.515 2.4 mm Titanium LCP Distal Radius PlateInstrument and Implant Set

6 Synthes Modular Mini Fragment LCP System

2.7 mm LCP Modular Mini Fragment Instrument and Implant Module Sets Stainless Steel (01.111.123) and Titanium (01.111.143)

Graphic Case60.111.003 2.7 mm LCP Module Case

Instruments310.26 2.7 mm Drill Bit, quick coupling, 100 mm,

2 ea.

310.87 Countersink, for 2.7 mm Cortex Screws

314.467 StarDrive Screwdriver Shaft, T8, 105 mm, 2 ea.

323.061 2.0 mm Threaded Drill Guide, with Depth Gauge, 2 ea.

323.062 2.0 mm Drill Bit with Depth Mark, quick coupling, 140 mm, 2 ea.

329.922 Bending Pin, for 2.4 mm and 2.7 mmLocking Plates, 2 ea.

Implants

2.7 mm Locking Screws, self-tapping, with T8 StarDrive recess, 3 ea.

Stainless Steel Titanium Length (mm)202.210 402.210 10202.212 402.212 12202.214 402.214 14202.216 402.216 16202.218 402.218 18202.220 402.220 20202.222 402.222 22202.224 402.224 24202.226 402.226 26202.228 402.228 28202.230 402.230 30202.232 402.232 32202.234 402.234 34202.236 402.236 36202.238 402.238 38202.240 402.240 40202.242 402.242 42202.244 402.244 44202.246 402.246 46202.248 402.248 48202.250 402.250 50202.255 402.255 55202.260 402.260 60

Synthes 7

2.7 mm LCP Plates

Stainless Steel Titanium Holes Length (mm)249.680 449.680 4 40249.681 449.681 5 49249.682 449.682 6 58249.683 449.683 7 67247.372 447.372 8 76247.374 447.374 10 94

2.7 mm LCP Condylar Plate

Stainless Steel Titanium Description

249.684 449.684 7 holes shaft, 66 mm

2.7 mm LCP Adaption Plate

247.370 447.370 12 holes, 97 mm

2.7 mm LCP T-Plate

249.685 449.685 2 holes head, 3 holes shaft, 32 mm

Implants continued

2.7 mm Cortex Screws, self-tapping, with T8 StarDriverecess, 3 ea.

Stainless Steel Titanium Length (mm)202.870 402.870 10202.872 402.872 12202.874 402.874 14202.876 402.876 16202.878 402.878 18202.880 402.880 20202.882 402.882 22202.884 402.884 24202.886 402.886 26202.888 402.888 28202.890 402.890 30202.892 402.892 32202.894 402.894 34202.896 402.896 36202.898 402.898 38202.900 402.900 40202.962 402.962 42202.963 402.963 44202.965 402.965 46202.966 402.966 48202.967 402.967 50202.968 402.968 55202.969 402.969 60

2.7 mm LCP L-Plates

Stainless Steel Titanium Description249.689 449.689 left, 2 holes head,

3 holes shaft, 32 mm249.688 449.688 right, 2 holes head,

3 holes shaft, 32 mm249.687 449.687 oblique left, 2 holes head,

3 holes shaft, 35 mm249.686 449.686 oblique right, 2 holes head,

3 holes shaft, 35 mm

Also Available2.7 mm LCP T-Plate

Stainless Steel Titanium Description

249.697 449.697 2 holes head, 4 holes shaft, 40 mm

2.7 mm LCP L-Plates

249.698 449.698 oblique right, 2 holes head, 4 holes shaft, 42 mm

249.699 449.699 oblique left, 2 holes head, 4 holes shaft, 42 mm

249.701 449.701 right, 2 holes head, 4 holes shaft, 40 mm

249.702 449.702 left, 2 holes head, 4 holes shaft, 40 mm

304.106– Screw Length Markers (10/pkg), 6 mm–40 mm,304.140 6 mm–28 mm in 1 mm increments,

30 mm–40 mm in 2 mm increments

313.353 Drill Sleeve for 2.0 mm Drill Bit

Alternative Set/Instrument Compatibility105.100 Modular Foot Systemor105.200/ Modular Hand System/145.200 Titanium Modular Hand Systemand the following:311.43 Handle, with quick coupling319.01 Depth Gauge323.26 2.7 mm Universal Drill Guideor105.515/ 2.4 mm LCP Distal Radius Plate Instrument

and Implant Set145.515 2.4 mm Titanium LCP Distal Radius Plate

Instrument and Implant Set

8 Synthes Modular Mini Fragment LCP System

LCP Modular Mini Fragment Instrument and Graphic Case Set (01.111.110)

Graphic Case60.111.000 Modular Mini Fragment LCP Graphic Case,

for common instruments and modules

Instruments311.01 Handle, with mini quick coupling

311.43 Handle, with quick coupling

312.20 2.0 mm Parallel Drill Guide and Drill Sleeve

319.006 Depth Gauge, for 2.0 mm and 2.4 mm Cortex Screws

319.01 Depth Gauge, for 2.7 mm and 3.5 mmCortex, and 4.0 mm Cancellous Bone Screws

319.39 Sharp Hook

323.201 2.0 mm Universal Drill Guide

323.202 2.4 mm Universal Drill Guide

323.26 2.7 mm Universal Drill Guide

329.12 Bending Pliers, 140 mm, for 1.5 mm and 2.0 mm plates, 2 ea.

347.985 Screw and Plate Holding Forceps

391.82 Wire-Bending Pliers, 160 mm

391.962 Bending/Cutting Pliers

392.00 Bending Iron, for 1.25 mm, 1.6 mm, 2.0 mm Kirschner Wires

398.40 Reduction Forceps with points, narrow,ratchet, 132 mm length

398.41 Reduction Forceps with Points, broad,Ratchet, 132 mm

398.819 Plate Holding Forceps with swivel foot, 150 mm

398.95 Termite Forceps, 90 mm length

399.18 Hohmann Retractor, 6 mm width, small, short narrow tip, 160 mm length

399.19 Hohmann Retractor, 8 mm width, small, short narrow tip, 160 mm length

399.48 Periosteal Elevator, 3 mm width, curvedblade, straight edge

399.481 Periosteal Elevator, 3 mm, curved blade,round edge

399.97 Reduction Forceps, with points, 130 mmlength, ratchet

Synthes

01.111.120 LCP Modular Mini Fragment Instrument and Implant Set

Set consists of:

01.111.110 LCP Modular Mini Fragment Instruments and Graphic Case Set

01.111.121 2.0 mm LCP Modular Mini FragmentInstrument and Implant Module Set

01.111.122 2.4 mm LCP Modular Mini FragmentInstrument and Implant Module Set

01.111.123 2.7 mm LCP Modular Mini FragmentInstrument and Implant Module Set

Kirschner Wires, trocar point (10/pkg.)

292.08 0.8 mm, 70 mm

292.10 1.0 mm, 150 mm

292.12 1.25 mm, 150 mm

292.16 1.6 mm, 150 mm

292.20 2.0 mm, 150 mm

01.111.140 Titanium LCP Modular Mini Fragment Instrument and Implant Set

Set consists of:

01.111.110 LCP Modular Mini Fragment Instruments and Graphic Case Set

01.111.141 2.0 mm Titanium LCP Modular Mini FragmentInstrument and Implant Module Set

01.111.142 2.4 mm Titanium LCP Modular Mini FragmentInstrument and Implant Module Set

01.111.143 2.7 mm Titanium LCP Modular Mini FragmentInstrument and Implant Module Set

Titanium Kirschner Wires, trocar point (10/pkg.)

492.08 0.8 mm, 70 mm

492.10 1.0 mm, 150 mm

492.12 1.25 mm, 150 mm

492.16 1.6 mm, 150 mm

492.20 2.0 mm, 150 mm

LCP Modular Mini Fragment Instrument and Implant SetStainless Steel (01.111.120) and Titanium (01.111.140)

Synthes (USA)1302 Wrights Lane EastWest Chester, PA 19380Telephone: (610) 719-5000To order: (800) 523-0322Fax: (610) 251-9056

Synthes (Canada) Ltd.2566 Meadowpine BoulevardMississauga, Ontario L5N 6P9Telephone: (905) 567-0440To order: (800) 668-1119Fax: (905) 567-3185

© 2007 Synthes, Inc. or its affiliates. All rights reserved. LCP and Synthes are trademarks of Synthes, Inc. or its affiliates. Printed in U.S.A. 8/11 J7545-E

www.synthes.com