Modu Tek Catalog

TEKNO ALUMINUM VS. STEEL

♦♦♦♦♦ There is no welding required!

♦ ♦ ♦ ♦ ♦ Our hard anodized extruded aluminum does not rust or corrode, so no painting is necessary, EVER!

♦♦♦♦♦ Extruded aluminum beam profiles are designed to be lightweight whilemaintaining exceptional high strength characteristics.

♦♦♦♦♦ Modu-Tek aluminum beam profiles are T-slotted for ease and speed ofassembly.

♦♦♦♦♦ Only three simple hand tools (1/2” wrench, 5/32” Allen Wrench, and a StandardTape Measure) are required to build structural systems.

♦♦♦♦♦ Structures built from Modu-tek aluminum beam can be quickly reconfigured toincorporate design changes.

♦♦♦♦♦ Extruded aluminum beams are are easily expanded or altered to meet therequirements of any on-going project.

♦♦♦♦♦ Additional components and accessories are simple to add at any time.

WHY TEKNO?♦♦♦♦♦ Tekno has the most competitive pricing in the industry. When the overall cost

of completing a project from start to finish are evaluated, Tekno is the trueleader in the price war.

♦♦♦♦♦ Tekno’s components do not require drilling, tapping, or counterboring; savingtime, expense, and labor.

♦♦♦♦♦ Tekno offers a wide variety of hardware to meet every design requirement.

♦♦♦♦♦ Tekno’s extruded aluminum profiles are T-6 grade...the strongest in theindustry!

♦♦♦♦♦ Because our Modu-Tek components were designed with the assemblyprocess in mind, absolutely no other product is faster or easier to assemble.

...but we don’t want you to simply take our word for it...

We want you to let us prove it.

TEKNOTYPICAL ASSEMBLIES

Standard fastening method when joining a 1x1 SlotSupport Beam perpindicular (90 deg.) to another.

High load capacity fastening method whenjoining a 1x1 Slot Support Beam perpindicular(90 deg.) to another. This method should beused when the structure is to be exposed toconsiderable vibration.

Standard fastening method when joining a 1x1 SlotSupport Beam at a 45 deg. angle

High load capacity fastening method whenjoining a 1x1 Slot Support Beam at a 45 deg.angle. This method should be used when thestructure is to be exposed to considerablevibration.

TEKNO

Standard fastening method when mounting a1x1, 1x2, or 1x3 Slot Support Beamperpindicularly (90 deg.) to a 1x1 Slot SupportBeam in cross beam applications.

High load capacity fastening method when mounting a 1x1,1x2, or 1x3 Slot Support Beam perpindicularly (90 deg.) to a1x1 Slot Support Beam in cross beam applications. Thismethod should be used when the structure is to be exposedto considerable vibration.

Standard fastning method when joining 1x1,1x2, and 1x3 Slot Support Beams to oneanother at a perpindicular (90 deg.) angle.

High load capacity fastening method when mount-ing 1x1, 1x2, and 1x3 Slot Support Beams to oneanother at a perpindicular (90 deg.) angle. Thismethod should be used when the structure is to beexposed to considerable vibration.

TYPICAL ASSEMBLIES

TEKNO

Standard fastening method when joining 1x1, 1x2,and 1x3 Slot Support Beams to one another at a 45degree angle.

High load capacity fastening method when mount-ing 1x1, 1x2, and 1x3 Slot Support Beams to oneanother at a 45 degree angle. This method shouldbe used when the structure is to be exposed toconsiderable vibration.

Fastening method for building a clean, stableframework corner from two Support Beams matedend-to-end at a 30 degree mitered joint. The endsof the beams should be cut at 15 degrees to formthe 30 degree mating angle.

Fastening method for building a clean, stableframework corner from two Support Beams matedend-to-end at a 90 degree mitered joint. The endsof the beams should be cut at 45 degrees to formthe 90 degree mating

TYPICAL ASSEMBLIES

TEKNO

An alternative fastening method for building aclean, stable 45 degree framework corner fromtwo Support Beams mated end-to-end or end-to-side. Each end of the two beams can be cutat 22.5 degrees to form the 45 degree matingangle, or one beeam can be cut at 45 degreesand fastened along the side of the adjoiningbeam, allowing lateral positioning of the miteredbeam anywhere along the lenght of the otherbeam.

An alternative fastening method for building aclean, stable 90 degree framework corner fromtwo Support Beams mated end-to-end or end-to-side. Each end of the two beams can be cutat 45 degrees to form the 90 degree matingangle, or one beam can be cut at 90 degreesand fastened along the side of the adjoiningbeam, allowing lateral positioning of the miteredbeam anywhere along the length of the otherbeam.

Assembly of 1x1 slot Fixed Foot to 1x1 SlotSupport Beam leg.

1x1 Teardrop Leveling Foot Assemnly specificallydesigned for mating with 1x1 Slot Support Beamlegs.

TYPICAL ASSEMBLIES

TEKNO

All Metal Leveling FootAssembly with 1/2”-13 Stemspecifically designed for matingwith 1x1 Slot Support Beamlegs.

Leveling Foot Assembly with1/2”-13 Stem designed for lightduty support applications suchas benches and tables.

1x1 Slot Rigid CasterAssembly mounts to the endof a 1x1 Slot Support Beam toprovide fixed caster moblility.

1x1 Slot Swivel Caster Assembly with Brake mountsto the end of a 1x1 Slot Support Beam tp provide“brakeable” swivel caster mobility.

1x1 Slot End Caps are used to cover exposedends of 1x1 Slot Support Beams and to presenta clean, finished look to complete structures.

TYPICAL ASSEMBLIES

TEKNO

T-slot Covers are used to cover open T-slots. T-slotcovers can be used to hold individual cables and airlines in position within the T-slot cavity, thus preventingdamage and/or injury by reducing exposure of the linesand cables.

The Panel Clamp T-Slot insert is used in guardsand enclosures to secure polycarbonate panels inplace within extrusion T-slots.

Top and Bottom 2-Panel Door Slides used inconjunction hold and guide two sliding panelsbetween two parallel beams.

Fastening method for attaching Expanded Mesh and/or Black Plastic Coated Wire Mesh Paneling toSupport Beam extrusions in guards and enclosures.

TYPICAL ASSEMBLIES

TEKNO

Fastening method for attaching solid Plastic/Polycarbonate Paneling to Support Beam extrusionsin guards and enclosures.

Handle Assembly used on sliding panels,doors, and access hatches.

Handle Assembly used when mounting handle toextrusion T-Slots.

Hinge Assembly for doors and swing-out orpivoting structures.

TYPICAL ASSEMBLIES

TEKNO

Hinge Assembly for doors, panels, and swing-out or pivoting structures that provides eitherfree or dampened door swing motion throughadjustment.

Lift-off Hinge Assembly for doors and swing-out orpivoting structures that allows quick and easy doorremoval.

Handle Assembly used to latch and lock doorson cabinets and guarding enclosures.

Magnetic Catch Assembly latches panels in place.Ten punds of force is required to break contactbetween the magnet and striker plate.

TYPICAL ASSEMBLIES

TEKNO

Table Of Contents

1. T-Slotted Extrusions

2. Brackets

3. Adapter/Joining Plates

4. Strap Nuts & Joiner Strips

5. Support Feet & Casters

6. Assembly Hardware

7. Beams & Caps

8. Electrical Components

9. Accessories

10. Additional Products & Services

TEKNO 1-1T - SLOTTED EXTRUSIONS

Support Beams

Tri-Slot Support Beam(1.31 in x 1.00 in)

E0100101Page 1-5

2 x 3 Slot Support Beam(2.50 in x 3.38 in)

E0100601Page 1-10


E0100201Page 1-6


E0100401Page 1-8


E0100701Page 1-11

Snap-on Guide RailE0800121Page 1-14

Guide Rail

2 x 2 Slot Support BeamE0100501

(2.50 in x 2.50 in)Page 1-9

1 x 1 Cross Beam (1.75 in X 1.00 in) E0100801 Page 1-12

1 x 2 Slot Support Beam(1.63in x 2.50 in) E0100301 Page 1-7

Lift Extrusion

Lift Extrusion E1200121 Page 1-13

TEKNO1-2T - SLOTTED EXTRUSIONS

Material Specifications:

Material:6063-T6 Aluminum Alloy

Surface Finish:201 R1 Clear Anodize, 150 RMS with an applicationdepth of 0.001 in - 0.002 in [0.025 mm - 0.051 mm]

Yield Strength:25,000 lbs/in2 [1,758 kg/cm2]

Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2]

Elongation:Maximum of 12% in 2.0 in [50.8 mm] of length

Modulus of Elasticity:10 million lbs/in2 [703,100 kg/cm2]

Brinell Hardness(500 Kg. Load, 10mm Ball):Approximately 73 HB

Straightness:0.0125 in/ft [0.1042 cm/m2], not to exceed 0.25 in[0.64 cm] over a 20 ft [6 m] length.

Twist:1/4° per foot, not to exceed 3° over a 20-foot length.

INTRODUCTIONThe information on this page

pertains to all T-Slotted Extrusions.

TEKNO 1-3T - SLOTTED EXTRUSIONS

L

W

Y

L

W

Y

W

Y

L

CASE 1:

CASE 2:

CASE 3:

T-Slotted Extrusion Load Data:

Typical Load Conditions(see illustrations at right):

• CASE 1: The extrusion is fixed at one end, with adownward load on the other end.

• CASE 2: The extrusion is supported at both ends,with a downward load on the center.

• CASE 3: The extrusion is fixed at both ends, with adownward load on the center.

Notes on Load Conditions:

• CASE 1 cantilever simulates a 5.0 ft [1.5 m] beamspan, while CASES 2 & 3 simulate a 10.0 ft [3.0 m]beam span.

• Gravity was applied, but the results do not accountfor the deflection caused by the weight of each beam.

• The force (W) is applied at the end of the 5.0 ft [1.5m] beam section in CASE 1. The force (W) is appliedat the center of the beam for CASES 2 & 3.

• Maximum stress for each case and each cross-section are shown in the Von Mises Stress Data tableat the right. Maximum deflections are shown on thetable on the next page.

• A diagram detailing “Load 1” and “Load 2” applied toE0400201 s also on the next page.

Part N o . C ase 1 C ase 2 C ase 3

50 2 50 50 0 50 2 50 50 0 50 2 50 50 0 Lb s. F orce

E0100201 8696 43478 86957 4348 21739 43478 2174 10870 21739 Stress(psi)

E0100301 4076 20380 40761 2038 10190 20380 1019 5095 10190 Stress(psi)

E0100401 2435 12175 24351 1218 6088 12175 609 3044 6088 Stress(psi)

E0100501 4115 20576 41152 2058 10288 20576 1029 5144 10288 Stress(psi)

E0100601 1848 9242 18484 924 4621 9242 462 2311 4621 Stress(psi)

E0100701 1519 7595 15190 759 3797 7595 380 1899 3797 Stress(psi)

E0100801 13636 68182 136364 6818 34091 68182 3409 17045 34091 Stress(psi)

E0200101 1024 5121 10242 512 2561 5121 256 1280 2561 Stress(psi)

E0200201 2540 12701 25402 1270 6351 12701 635 3175 6351 Stress(psi)

E0200301 1237 6186 12371 619 3093 6186 309 1546 3093 Stress(psi)

E0400101 467 2334 4668 233 1167 2334 117 583 1167 Stress(psi)E0400201 Load

1 850 4249 8499 425 2125 4249 212 1062 2125 Stress(psi)

E0400201 Load 2 1060 5398 10597 530 2649 5298 265 1325 2649 Stress(psi)

Stress Data

TEKNO1-4T - SLOTTED EXTRUSIONS

Notes:

TEKNOE0100101

Tri-Slot Support Beam1.31 in x 1.00 in

[33.27 mm x 25.40 mm]

Typical Uses:• Structural framework.• Cross supports.• Door and safety screen frames.

Features:• T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts.

Material:6063-T6 Aluminum Alloy

Surface Finish:201 R1 Clear Anodize, 150 RMS with anapplication depth of 0.001 in - 0.002 in[0.025 mm - 0.051 mm]



Cross Sectional Area (A):0.422 in2 [2.723 cm2]

Moments of Inertia:Ix: 0.043 in4 [1.790 cm4]Iy: 0.077 in4 [3.205 cm4]

Sectional Moduli:Wx: 0.084 in3 [1.377 cm3]Wy: 0.113 in3 [1.852 cm3]

Weight Per Foot:0.47 lb [0.21 kg]

Maximum Length Available:20.0 ft [6.1 m]

.

1-5T-SLOTTED EXTRUSIONS

1.31” [33.27mm]

0.81” [20.62mm]

1.00” [25.40mm]

TEKNO1-6T-SLOTTED EXTRUSIONS

E01002011 x 1 Slot Support Beam

1.63 in x 1.63 in[41.40 mm x 41.40 mm]


Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.• Corner holes run throughout the length of theextrusion for the attachment of End Caps, EndPlate Brackets, Leveling Feet, and Casters.

Material: 6063-T6 Aluminum Alloy

Surface Finish:201 R1 Clear Anodize, 150 RMS with an applica-tion depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]




Moments of Inertia:Ix: 0.280 in4 [11.655 cm4]Iy: Symmetric

Sectional Moduli:Wx: 0.345 in3 [5.654 cm3]Wy: Symmetric



.

0.81” [20.65mm]

0.25” [6.35mm]

Ø0.23” [Ø5.72mm]TYP. 4 PLCS.

1.63”[41.28mm]

1.13”[28.58mm]

TEKNOE0100301

1 x 2 Slot Support Beam1.63 in x 2.50 in

[41.40 mm x 63.50mm]


Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.• Corner holes run throughout the length of theextrusion for the attachment of End Caps andEnd Plate Brackets.


Surface Finish:201 R1 Clear Anodize, 150 RMS with an appli-cation depth of 0.001 in - 0.002 in [0.025 mm -0.051 mm]








.


XX

Y

Y

1.63” [41.28mm]

1.13” [28.65mm]

Ø0.23”[Ø5.72mm]

TYP. 4 PLCS.

0.25” [6.35mm]

2.50”[63.50mm]

2.00”[50.80mm]

0.88”[22.23mm]

0.81”[20.65mm]



1.63 in x 3.38 in[41.40 mm x 85.85 mm]

Typical Uses:• Structural framework.• Cross supports.











.

XX

Y

Y

1.63” [41.28mm]

1.13” [28.58mm]

0.25” [6.35mm]

Ø0.23”[Ø5.72mm]

0.88” [22.23mm]

0.81” [20.65mm]

3.38”[85.73mm]

2.88”[73.03mm]

TEKNO 1-9T-SLOTTED EXTRUSIONS


2.50 in x 2.50 in[63.50 mm x 63.50 mm]

Typical Uses:• Structural framework.• Cross supports.• Support legs.











.

0.81” [20.65mm]

0.25” [6.35mm]

Ø0.23”[Ø5.72mm]

2.50”[63.50mm]

2.00”[50.80mm]

0.88”[22.23mm]



2.50 in x 3.38 in[63.50 mm x 85.85 mm]

Typical Uses:• Structural framework.• Cross supports.











.

XX

Y

Y2.50” [63.50mm]

2.00” [50.80mm] 0.25”[6.35mm]

0.81”[20.62mm]

0.88”[22.23mm]

Ø0.23”[Ø5.72mm]

3.38”[86.73mm]

2.88”[73.03mm]

TEKNOE0100701

3 x 3 Slot Support Beam3.38 in x 3.38 in

[85.85 mm x 85.85 mm]

Typical Uses:• Structural framework.• Cross supports.• Support legs.











.


3.38” [85.73mm]

2.88” [73.03mm]

Ø0.23”[Ø5.72mm]

0.25” [6.35mm]

0.88” [22.23mm]

0.81” [20.62mm]


E01008011 x 1 Slot Cross Beam

1.75 in x 1.00 in[44.45 mm x 25.40 mm]


Features:• T-slots for modular assembly with T-bolts,Joiner Strips, and Square Nuts.










.

XX

Y

Y

1.75”[44.45mm]

0.88”[22.23mm]

0.50”[12.70mm]

1.00” [25.40mm]

TEKNO 1-13T-SLOTTED EXTRUSIONS

Typical Use:• Lift mechanisms within structural frameworkapplications.

Features:• T-slots for modular assembly with T-bolts, Joiner Strips, and Square Nuts.* Two embedded larger slots for #60 chain and wearstrip the length of the beam.


Surface Finish: 201 R1 Clear Anodize, 150 RMS with an application depth of 0.001in - 0.002 in [0.025 mm - 0.051 mm]


Tensile Strength:30,000 lbs/in2 [2,109 kg/cm2

Cross Sectional Area (A):8.688 in2

Moments of Inertia:

Sectional Moduli:

Weight Per Foot: 10.17 lb [4.64 kg]

Maximum Length Available:

.

E1200121Lift Extrusion


E0800121Snap-On Guide Rail

Typical Use:• Guiding pallets along lenghts of conveyor.

Features:• Mounts easily to allTekno Guide Rail Brackets

Material: 6063-T6 Aluminim Alloy

Surface Finish:201 R1 Clear Anodize, 150 RMS with anapplication depth of 0.001 in - 0.002 in [0.025mm - 0.051 mm]

Yield Strength:

Tensile Strength:

Cross Sectional Area (A):

Moments of Inertia:

Sectional Moduli:

Weight Per Foot:

Maximum Length Available: 20 ft (240in)

.

TEKNO

Notes:


2-1BRACKETS

90° Web Brackets

2 x 2 Slot Full WebBracket

B0100521Page 2-6

45° Web Brackets

1 x 2 Slot Half WebBracket - Right

B0100221Page 2-3

1 x 2 Slot Half WebBracket - Left

B0100321Page 2-4


B0100421Page 2-5


B0100621Page 2-7


B0100721Page 2-8


B0100821Page 2-9

1 x 1 Slot 45° WebBracket

B0100921Page 2-10


B0101021Page 2-11


B0101121Page 2-12

Angle Bracket

1 x 1 Slot Angle BracketB0200121Page 2-14

1 x 2 Slot Full Web BracketB0100121Page 2-2

Guide Rail Bracket

Guide Rail BracketB0700721Page 2-13

TEKNOTEKNOTEKNOTEKNOTEKNO

TEKNOB0100121

1 x 2 Slot Full Web Bracket

Typical Use:• To join two coplanar lengths of 1-slotSupport Beam perpendicular (90°) to oneanother.

Features:• Raised bosses and slotted holes for easyalignment during installation.

Material:Pressure Die-cast Aluminum

Weight:0.25 lb [0.11 kg]

Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 4each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 4 each.

OR

• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• Double Square Nuts (H0100721), 4 each.

Assembly Note:When using Hex Head Cap Screws andDouble Square Nuts with this bracket inapplications where the hardware may vibrate,apply Locktite™ #262 to the outside thread ofthe Cap Screws before insertion to preventloosening.

.

2-2BRACKETS

Ø0.34”[Ø8.64mm]

0.19”[4.78mm]

0.25”[6.35mm]

0.88” [22.23mm]0.38” [9.52mm]

0.43”[10.97mm]SQUARE

0.06”[1.52mm]

2.31”[58.75mm]

1.38” [34.93mm]0.69” [17.48mm]

0.81”[20.65mm]

TEKNOB0100221

1 x 2 Slot HalfWeb Bracket - Right

Typical Use:• To join two lengths of 1-slot Support Beams,not on the same plane, perpendicular (90°) toone another.

Features:• Raised bosses and slotted holes for easyalignment during installation.• The web of the bracket is on its right side asshown in the illustration at right.



Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 3 each.• 5/16” Flat Washers (68N34WSDZ/089), 3each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 3 each.

OR


Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswhere the hardware may vibrate, applyLocktite™ #262 to the outside thread of the CapScrews before insertion to prevent loosening.

.

2-3BRACKETS

0.38”[9.52mm]

0.19”[4.78mm]


0.25”[6.35mm]

0.06”[1.60mm]

2.31”[58.75mm]

Ø0.34”[Ø8.64mm]

0.88”[22.23mm]

1.38”[34.98mm]0.69”

[17.48mm]

0.81”[20.62mm]

1.47”[37.39mm]

TEKNOB0100321

1 x 2 Slot HalfWeb Bracket - Left

Typical Use:• To join two lengths of 1-slot SupportBeams, not on the same plane, perpendicular(90°) to one another.

Features:• Raised bosses and slotted holes for easyalignment during installation.• The web of the bracket is on its left side asshown in the illustration at left.




OR



.

2-4BRACKETS

Ø0.34”[Ø8.64mm]

0.19”[4.78mm]

0.25”[6.35mm]

0.88”[22.23mm]


0.06”[1.60mm]

1.47”[37.34mm]

0.81”[20.62mm]

0.69”[17.48mm]

1.38”[34.93mm]

0.38”[9.52mm]

2.31”[58.67mm]

TEKNO2-5BRACKETS

B01004212 x 1 Slot Full Web Bracket

Typical Use:• To join two lengths of 2-slot Support Beam,not on the same plane, perpendicular (90°) toone another.





OR


Assembly Note:When using Hex Head Cap Screws andDouble Square Nuts with this bracket inapplications where the hardware may vibrate,apply Locktite™ #262 to the outside threadof the Cap Screws before insertion to preventloosening.

.


0.19”[4.78mm]

0.25”[6.35mm]

2.31”[58.75mm]

0.06”[1.60mm]

0.81”[20.62mm]

0.69”[17.48mm]

2.25” [57.15mm]

0.38”[9.52mm]

Ø0.34”[Ø8.64mm]1.47”

[37.39mm]

TEKNO 2-6BRACKETS


Typical Use:• To join two coplanar lengths of 2-slotSupport Beam perpendicular (90°) to oneanother.





OR



.

0.88” [22.35mm]


Ø0.34”[Ø8.64mm]

0.19”[4.78mm]

0.25”[6.35mm]

0.06”[1.60mm]

2.31”[58.72mm]

0.81”[20.62mm]

0.69”[17.48mm]

2.25” [57.15mm]

0.38”[9.52mm]

TEKNO2-7BRACKETS


Typical Use:• To join a length of 1-slot Support Beamperpendicular (90°), but not coplanar, to alength of 3-slot Support Beam.





OR


Assembly Note:When using Hex Head Cap Screws andDouble Square Nuts with this bracket inapplications where the hardware may vibrate,apply Locktite™ #262 to the outside threadof the Cap Screws before insertion to preventloosening.

.

0.43”[10.97mm]

0.19”[4.78mm]

0.25”[6.35mm]

3.19”[80.98mm]

0.06”[1.60mm]

Ø0.34” [Ø8.64mm]

0.69”[17.48mm]

0.81”[20.62mm]

2.44” [61.93mm]

3.13” [79.38mm]

0.38”[9.52mm]

1.47”[37.39mm]

TEKNO 2-8BRACKETS


Typical Use:• To join a length of 2-slot Support Beamperpendicular (90°), but not coplanar, to a lengthof 3-slot Support Beam.





OR



.

Ø0.34”[Ø8.64mm] 0.88” [22.23mm]

0.19”[4.78mm]


0.25”[6.35mm]

0.06”[1.60mm]

3.19”[80.98mm]

0.69”[17.48mm]

1.19”[30.18mm]

3.13” [79.38mm]

0.38”[9.52mm]

2.35”[59.59mm]

TEKNO2-9BRACKETS


Typical Use:• To join two coplanar lengths of 3-slot SupportBeam perpendicular (90°) to one another.





OR



.

0.38” [9.52mm]0.06” [1.60mm]


1.75”[44.45mm]

1.75”[44.45mm]

Ø0.34”[Ø8.64mm]

0.25”[6.35mm] 0.19”

[4.78mm]

3.19”[80.98mm]

3.13” [79.38mm]0.69”

[17.48mm]

0.81”[20.62mm]

TEKNO 2-10BRACKETS

B01009211 x 1 Slot 45° Web Bracket

Typical Uses:• To join the end of a 1-slot Support Beam to theside of another 1-slot Support Beam at a 45° angle.• Provides support structure sway bracing.

Features:• Provides easy alignment for 45° angle gussets.• Surface “A” depicted in the 2-D illustrationattaches firmly to the end of a 1 x 1 Slot SupportBeam with 1/4 - 20 Socket Head Cap Screws.• Surface “B” attaches firmly to the side of the other1 x 1 Slot Support Beam with fasteners listed below.



Hardware Recommended for Assembly:For attachment to the end of the one support beam:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.

For attachment to the side of the other supportbeam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 2 each.

OR

• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• Double Square Nuts (H0100721), 2 each.

Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applications wherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.

.

0.25” [6.35mm]

0.25”[6.35mm]

1.95”[49.48mm]0.31”

[7.92mm]

1.13”[28.58mm]

SURFACE A

SURFACE B

4.50” [114.30mm]

3.50” [88.90mm] 0.50” [12.70mm]

0.63”[15.88mm]

Ø0.34” [Ø8.64mm]Ø0.22” [Ø5.56mm]

0.75”[19.05mm]

1.63”[41.28mm]

TEKNO2-11BRACKETS



Features:• Provides easy alignment for 45° angle gussets.• Surface “A” depicted in the 2-D illustrationattaches firmly to the end of a 2 x 2 Slot SupportBeam with 1/4 - 20 Socket Head Cap Screws.• Surface “B” attaches firmly to the side of the other2 x 2 Slot Support Beam with fasteners listedbelow.



Hardware Recommended for Assembly:For attachment to the end of the 2 x 2 Slot SupportBeam:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.


OR



.

0.25” [6.35mm]

0.25”[6.35mm]

2.00”[50.80mm]

SURFACE A

SURFACE B

5.38” [136.53mm]

2.57”[65.18mm]

0.31”[7.95mm]

0.50” [12.70mm]4.38” [111.13mm]

2.13”[53.98mm]

2.50”[63.50mm]

0.62”[15.72mm]

0.88”[22.23mm]

Ø0.34”[Ø8.64mm]

Ø0.27” [Ø5.58mm]

TEKNO 2-12BRACKETS



Features:• Provides easy alignment for 45° angle gussets.• Surface “A” depicted in the 2-D illustrationattaches firmly to the end of a 3 x 3 Slot SupportBeam with 1/4 - 20 Socket Head Cap Screws.• Surface “B” attaches firmly to the side of the other3 x 3 Slot Support Beam with fasteners listed below.



Hardware Recommended for Assembly:For attachment to the end of the 3 x 3 Slot SupportBeam:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.


OR



.

0.25” [6.35mm]

0.25”[6.35mm]

3.19”[80.90mm]

0.31”[7.92mm]

2.88”[73.03mm]

SURFACE A

SURFACE B6.00” [152.40mm]

5.00” [127.00mm] 0.50” [12.70mm]

3.00”[76.20mm]

3.38”[85.73mm]

Ø0.27” [Ø5.58mm]Ø0.34” [Ø8.64mm]

0.88”[22.23mm]

0.63”[15.88mm]

TEKNO2-13BRACKETS

B0700721Guide Rail Bracket

Typical Uses:• Mounting bracket for Tekno style guide rail

Material:6061-T6 Aluminum

Surface Finish:Polished


Hardware Recommended for Assembly:For a Support Beam Joint:• 3/4’ T-Bolt (H0100121), (1ea.)• 5/16”-18 NY-LOC Flange nut (31CNNEFW)• Guide Rail Wedge ( H0900121), (1ea)

.

TEKNO 2-14BRACKETS

0.25”[6.35mm]

Ø0.34”[Ø8.74mm]

0.25”[6.35mm]

1.50”[38.10mm]

1.50”[38.10mm]

1.50”[38.10mm] 0.75”

[19.05mm]

0.81”[20.62mm]0.81”

[20.62mm]

B02001211 x 1 Slot Angle Bracket

Typical Uses:• To attach a 1-slot support beam to amachine base.

Material:6061-T6 Aluminum Alloy Angle

Surface Finish:Clear Anodize


Hardware Recommended for Assembly:For a Support Beam Joint:• 5/16” - 18 x 5/8” Button Head Cap Screws(31C62KBCS), 2 each.• 5/16” Double Square Nuts (H0100721), 2each.

OR

For Attachment to a Machine Base:• 5/16” - 18 x 5/8” Button Head Cap Screws(31C62KBCS), 2 each.• 5/16” Double Square Nut (H0100721), 1each.

Assembly Note:When using Cap Screws and Double SquareNuts with this bracket in applications wherethe hardware may vibrate; apply Locktite™#262 to the outside thread of the Cap Screwsbefore insertion to prevent loosening.

.

TEKNO

Stair Tread and WalkoversTekno’s Modu-Tek line also allows you to design and buildcompletely modular stair treads and walkovers for yourapplication. Built of the highest quality extruded anodizedaluminum, these structures provide lightweight, yet ultrasturdy platforms and staircases. Our tread plate materialis designed with a premium on safety; all of our treadplates feature raised rows of “teeth” for extra traction. Wealso offer vented tread plate that allows dirt and otheraccumulates to fall freely through the plate, virtuallyeliminating the risk of slippage. As is the case with anyModu-Tek product, these structures posess incredibleversatility and are easily configured/reconfigured for anyapplication; no drilling or tapping required! Call us today forfurther information on our Modu-Tek Walkovers and StairTreads!This Page

Intentionally LeftBlank

TEKNO

Notes:

TEKNOAdapter Plates

1 x 1 Slot End AdapterPlate

B0300121Page 3-3


B0300321Page 3-5

2 x 3 Slot Ended AdapterPlate

B0300621Page 3-8


B0300721Page 3-9


B0300821Page 3-10


B0300921Page 3-11

90° Corner Joining Plates

1-Slot 90° CornerJoining Plate

B0500121Page 3-12

Heavy DutyJoining Plates


B0300221Page 3-4


B0300421Page 3-6


B0300521Page 3-7


B0500221Page 3-13


B0500321Page 3-14

1-Slot Heavy Duty CornerJoining Plate

B0500421Page 3-15

3-1ADAPTER/JOINING PLATES

TEKNO 3-2ADAPTER/JOINING PLATES

45° Corner Joining Plates

1 x 1 Joining PlateB0501121Page 3-21

1-Slot 45° Right HandCorner Joining Plate

B0500521Page 3-16

1-Slot Left HandCorner Joining Plate

B0500621Page 3-17

2-Slot 45° Right HandCorner Joining Plate

B0500721Page 3-18

2-Slot 45° Left HandCorner Joining Plate

B0500821Page 3-18

3-Slot 45° RightCorner Joining Plate

B0500921Page 3-19

3-Slot 45° LeftCorner Joining Plate

B0501021Page 3-20

1 x 1 (4-Hole Tee) JoiningPlate

B0501221Page 3-22

1 x 1 (6-Hole Tee) JoiningPlate

B0501321Page 3-23

TEKNO3-3ADAPTER/JOINING PLATES

B03001211 x 1 Slot End Adapter Plate

Typical Use:• To mount 1 x 1, 1 x 2, or 1 x 3 Slot Support Beamsperpendicularly to 1 x 1 Slot Support Beams incross beam applications.

Features:• Provides alignment for two perpendicular supportbeams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 1 x 1 Slot Support Beam to the bracketon surface “A”.• T-bolts or Hex Head Cap Screws secure surface“B” of the bracket to the side of the mating 1 x 1, 1 x2, or 1 x 3 Slot Support Beam.

Material:Clear Anodized Aluminum


Hardware Recommended for Assembly:For attachment to the end of the 1 x 1 Slot SupportBeam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.

For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2 each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 2 each.

OR



.

4.25” [107.95mm]3.25” [82.55mm]

1.13”[28.58mm]

0.25”[6.35mm]

1.13”[28.58mm]

0.50”[12.70mm]

Ø0.34” [Ø8.64mm]

DRILLED & COUNTERSUNKFOR 1/4 -20 FHCS

1.56”[39.67mm]

0.81”[20.65mm]

1.63”[41.28mm]

SURFACEA

SURFACEB

0.31”[7.95mm]




Features:• Provides alignment for two perpendicularsupportbeams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 1 x 2 Slot Support Beam to the bracketon surface “A”.• T-bolts or Hex Head Cap Screws secure surface“B” of the bracket to the side of the mating 1 x 1, 1 x2, or 1 x 3 Slot Support Beam.





OR


Assembly Note:When using Hex Head Cap Screws and DoubleSquare Nuts with this bracket in applicationswherethe hardware may vibrate, apply Locktite™ #262 tothe outside thread of the Cap Screws beforeinsertion to prevent loosening.

.









OR



.

SURFACEA

SURFACEB

0.31”[7.95mm]

0.25” [6.35mm] 1.13” [28.58mm]

0.50” [12.70mm]

Ø0.34”[Ø8.64mm]

DRILLED &COUNTERSUNK

FOR1/4-20 FHCS

1.56”[39.67mm]

0.81”[20.65mm]

1.63”[41.28mm]

2.88”[73.03mm]

5.00”[127.00mm]

6.00”[152.40mm]









OR



.









OR



.

TEKNO


Typical Use:• To mount 1 x 2, 2 x 2, or 2 x 3 Slot SupportBeams perpendicularly to 2 x 3 Slot SupportBeams in cross beam applications.

Features:• Provides alignment for two perpendicularsupport beams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 2 x 3 Slot Support Beam to thebracket on surface “A”.• T-bolts or Hex Head Cap Screws securesurface “B” of the bracket to the side of themating 1 x 2, 2 x 2, or 2 x 3 Slot Support Beam.



Hardware Recommended for Assembly:For attachment to the end of the 2 x 3 SlotSupport Beam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.

For attachment to the side of the other matingsupport beam:• 5/16” - 18 x 7/8” T-bolts (H0100221), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.

OR



.

2.50” [63.50mm]SURFACE A

SURFACE B

0.31” [7.95mm]

0.81”[20.65mm]

0.88”[22.23mm]

Ø0.34”[Ø8.64mm] 0.50” [12.70mm]


FOR1/4-20 FHCS

1.56”[39.67mm]

2.00” [50.80mm]

2.88”[73.03mm]

5.00”[127.00mm]

6.00”[152.40mm]





Features:• Provides alignment for two perpendicularsupport beams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screwssecure the end of a 1 x 3 Slot Support Beam tothe bracket on surface “A”.• T-bolts or Hex Head Cap Screws securesurface “B” of the bracket to the side of themating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam.



Hardware Recommended for Assembly:For attachment to the end of the 2 x 3 SlotSupport Beam:• 1/4” - 20 x 1 1/4” Flat Head Thread CuttingCap Screws (25C125TTF), 4 each.


OR



.

SURFACE A

SURFACE B

0.31”[7.95mm]

3.38” [85.73mm]

0.25”[6.35mm]

Ø0.34”[Ø8.64mm]

0.88”[22.23mm]


FOR1/4-20 FHCS

0.50” [12.70mm]

1.56”[39.67mm]

1.75”[44.45mm]

2.88” [73.03mm]

1.13”[28.58mm]

3.25”[82.55mm]

4.25”[107.95mm]

TEKNOB0300821

3 x 2 Slot End Adapter Plate


Features:• Provides alignment for two perpendicularsupport beams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screws securethe end of a 2 x 3 Slot Support Beam to thebracket on surface “A”.• T-bolts or Hex Head Cap Screws securesurface “B” of the bracket to the side of themating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam.



Hardware Recommended for Assembly:For attachment to the end of the 2 x 3 SlotSupport Beam:• 1/4” - 20 x 1 1/4” Flat Head Thread Cutting CapScrews (25C125TTF), 4 each.


OR



.

3.38” [85.73mm]

SURFACE A

0.31” [7.95mm]

SURFACE B

0.88”[22.23mm]

0.81”[20.62mm]

0.50” [12.70mm]

Ø0.34”[Ø8.64mm]

DRILLED &COUNTERSUNKFOR 1/4-20 FHCS

1.56” [39.67mm]

0.25” [6.35mm] 2.88” [73.03mm]

2.00”[50.80mm]

4.13”[104.78mm]

5.13”[130.18mm]





Features:• Provides alignment for two perpendicularsupport beams.• 1/4” - 20 x 1 1/4” Flat Head Cap Screwssecure the end of a 3 x 3 Slot Support Beam tothe bracket on surface “A”.• T-bolts or Hex Head Cap Screws securesurface “B” of the bracket to the side of themating 1 x 3, 2 x 3, or 3 x 3 Slot Support Beam.



Hardware Recommended for Assembly:For attachment to the end of the 3 x 3 SlotSupport Beam:• 1/4” - 20 x 1 1/4” Flat Head Thread CuttingCap Screws (25C125TTF), 4 each.


OR



.

3.38” [85.73mm]

SURFACE A0.31” [7.95mm]

SURFACE B

0.81”[20.65mm]

0.25”[6.35mm]

Ø0.34”[Ø8.64mm]

DRILLED &COUNTERSUNKFOR 1/4-20 FHCS

1.56”[39.67mm]

2.88” [73.03mm]

0.88”[22.23mm]

0.50” [12.70mm]

2.88”[73.03mm]

5.00”[127.00mm]

6.00”[152.40mm]

TEKNOB0500121

1-Slot 90° Corner Joining Plate

Typical Use:• To connect 1 x 1, 1 x 2, and 1 x 3 SlotSupport Beams to one another at a perpen-dicular (90°) angle.

Features:• Recessed tabs allow for the accuratepositioning into beam T-slots to ensuresquareness of the joint.

Material:Mild Steel, Zinc Plated


Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 5each.• 5/16” Flat Washers (68N34WSDZ/089), 5each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 5 each.

Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length of onebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 5 each.• 5/16” Lock Washers (31NLOCZ), 5 each.• Double Square Nuts (H0100721), 5 each.

.

0.63”[15.88mm]

1.75”[44.45mm]

0.88”[22.23mm]

4.56”[115.90mm]

1.25”[31.75mm]

Ø0.34” [Ø8.64mm]

0.13”[3.18mm]

0.06”[1.60mm] 0.43”

[10.97mm]

SECTION A-A

High Load Capacity Fastening Method



B05002212-Slot 90° Corner Joining

PlateB05002212-Slot 90° Corner Joining Plate

Typical Use:• To connect 1 x 2, 2 x 2, and 2 x 3 SlotSupport Beams to one another at aperpendicular(90°) angle.






.


B05003213-Slot 90° Corner Joining Plate

Typical Use:• To connect 1 x 3, 2 x 3, and 3 x 3 SlotSupport Beams to one another at aperpendicular(90°) angle.






.

TEKNOB0500421

1-Slot Heavy Duty CornerJoining Plate

Typical Use:• To connect all T-slotted Support Beams toone another at a perpendicular (90°) anglewith 4 fasteners per beam positionedlinearly.

Features:• Greater plate thickness for increasedstrength and rigidity.• Recessed tabs allow for the accuratepositioning into beam T-slots to ensuresquareness of the joint.


Weight:1.08 lbs [0.49 kg]


Alternate configuration:• 4-Hole Joiner Strips (B0600311), 2 each.• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• 5/16” Lock Washers (31NLOCZ), 8 each.

.


TEKNO

B05005211-Slot 45° Right Hand Corner

Joining Plate

Typical Use:• To connect 1 x 1, 1 x 2, and 1 x 3 SlotSupport Beams to one another at a 45°angle.

Features:• Provides alignment of two support beamsat a 45° angle.• Recessed tabs allow for the accuratepositioning into beam T-slots to ensure acorrect joint angle.





.



B05006211-Slot 45° Left Hand Corner Joining

Plate

Typical Use:• To connect 1 x 1, 1 x 2, and 1 x 3 SlotSupport Beams to one another at a 45° angle.

Features:• Provides alignment of two support beams at a45° angle.• Recessed tabs allow for the accuratepositioninginto beam T-slots to ensure a correct jointangle.



Hardware Recommended for Assembly:Standard Configuration:• 5/16” - 18 x 3/4” T-bolts (H0100121), 5 each.• 5/16” Flat Washers (68N34WSDZ/089), 5each.• 5/16” - 18 Nylon Insert Thin Height Lock Nuts(31CNTEZ), 5 each.

Alternate configuration (used as a high loadingcapacity fastening method which allows for easylateral movement of the bracket and fastenersalong the length of one beam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 5 each.• 5/16” Lock Washers (31NLOCZ), 5 each.• Double Square Nuts (H0100721), 5 each.

.



Joining Plate&

B05008212-Slot 45° Left Hand Corner

Joining Plate







.

B0500721

B0500821



Joining Plate





Hardware Recommended for Assembly:• 5/16” - 18 x 3/4” T-bolts (H0100121), 15each.• 5/16” Flat Washers (68N34WSDZ/089), 15each.• 5/16” - 18 Nylon Insert Thin Height LockNuts (31CNTEZ), 15 each.

Alternate configuration (used as a highloading capacity fastening method whichallows for easy lateral movement of thebracket and fasteners along the length ofonebeam’s T-slot):• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 15 each.• 5/16” Lock Washers (31NLOCZ), 15 each.• Double Square Nuts (H0100721), 15 each.

.


B05010213-Slot 45° Left Hand Corner Joining

Plate







.

TEKNOB0501121

1 x 1 Joining Plate

Typical Use:• To mount 1 x 1 support beams side by sidefor guarding applications.

Features:• T-bolts secure the plate to the supportbeams for ease of assembly.




.

3.00” [76.20mm]

2.31” [58.72mm]0.69”

[17.45mm]

3.00”[76.20mm]

0.63”[15.88mm]

2.38”[60.33mm]

0.25”[6.35mm]


TEKNO

B05012211 x 1 (4-Hole) Tee Joining Plate

Typical Use:• To mount 1 x 1 support beams in a Teeconfiguration for guarding applications.Features:• T-bolts secure the plate to the supportbeams for ease of assembly.




.



B05013211 x 1 (6-Hole) Tee Joining Plate

Typical Use:• To mount 1 x 1 support beams side byside for guarding applications.Features:• T-bolts secure the plate to the supportbeams for ease of assembly.




.

TEKNO

Notes:

TEKNO

Strap Nuts Straight Joiner Strip

2 - Hole Strap NutB0600121Page 4-2

3 - Hole Strap NutB0600221Page 4-3 4 - Hole Joiner Strip

B0600311Page 4-4

Vertical Joiner Strips

30° Vertical JoinerStrip

B0600421Page 4-5


B0600521Page 4-6


B0600621Page 4-7


B0600721Page 4-8

Horizontal Joiner Strips

45° Horizontal JoinerStrip

B0600921Page 4-10


B0601121Page 4-12


B0600821Page 4-9


B0601021Page 4-11

4-1 Strap Nuts & Joiner Strips

TEKNO

B06001212-Hole Strap Nut

Typical Use:• A high-loading fastening method whichallows for easy movement along the length ofa T-slot. The strap nut can function in placeof T-bolts or Double Strap Nuts on WebBrackets, Corner Tab Brackets, etc. when ahigher loading capacity is required.

Features:• Includes two pre-tapped holes for HexHead Cap Screws, Set Screws, or MachineScrews.



Hardware Recommended for Assembly:For a Web Bracket:• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.

For a 45° Web or End Plate Bracket:• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.

For a Corner Tab Bracket:• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 2 each.• 5/16” Lock Washers (31NLOCZ), 2 each.

.

2.50” [63.50mm]

1.75”[44.45mm]

0.38”[9.52mm]

0.25”[6.35mm]

0.75[19.05mm]5/16-18

TAPPED(2 PLACES)

4-2Strap Nuts & Joiner Strips

TEKNOB0600221

3-Hole Strap Nut

Typical Use:• A high-loading fastening method whichallows for easy movement along the length ofa T-slot. The strap nut can function in placeof T-bolts or Double Strap Nuts on WebBrackets, Corner Tab Brackets, etc. when ahigher loading capacity is required. Whenused in this manner, the third pre-tappedhole, secured by a Set Screw, can serve tofurther prevent slippage of the parts along thelength of the T-slot.

Features:• Includes three pre-tapped holes for HexHead Cap Screws, Set Screws, or MachineScrews.



Hardware Recommended for Assembly:For a Web Bracket:• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 2 each.• 5/16” - 18 x 5/16” Stainless Steel SetScrew (31C31KKCS), 1 each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.

For a 45° Web or End Plate Bracket:• 5/16” - 18 x 3/4” Hex Head Cap Screws(31C75HCS5Z), 2 each.• 5/16” - 18 x 5/16” Stainless Steel SetScrew (31C31KKCS), 1 each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.

For a Corner Tab Bracket:• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 2 each.• 5/16” Lock Washers (31NLOCZ), 2 each.

.

4.25” [107.95mm]

1.75”[44.45mm]

0.38”[9.52mm]

0.25”[6.35mm]

5/16-18TAPPED

(3 PLACES)

0.75”[19.05mm]

0.38”[9.52mm]

4-3 Strap Nuts & Joiner Strips

TEKNOB0600311

4-Hole Strap Nut

Typical Uses:• To mate and connect support beams in anend-to-end fashion when inserted into T-slots and fastened.• Can be used as a strap nut, a high-loadingfastening method which allows for easymovement along the length of a T-slot. Thestrap nut can function in place of T-boltsand Double Square Nuts on Web Brackets,Corner Tab Brackets, etc. when a higherloading capacity is required. When used inthis manner, the third and fourth pre-tappedholes, secured by Set Screws, can serve tofurther prevent slippage of the parts along thelength of the T-slot.

Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or Machine Screwsfor connecting beams and attachments.



Hardware Included:• 5/16” - 18 x 5/16” Stainless Steel SetScrew (31C31KKCS), 4 each.

Hardware Recommended for Assembly:For use as a Joiner Strip to join two supportbeams end-to-end:• None (all set screws included).

For attaching to a 3-Slot 90° Corner TabBracket:• 5/16” - 18 x 1/2” Hex Head Cap Screws(31C50HCS5Z), 4 each.• 5/16” Lock Washers (31NLOCZ), 4 each.

.

6.00” [152.40mm]

1.75” [44.45mm]0.38”

[9.52mm]

5/16-18TAPPED

(4 PLACES)

0.38”[9.52mm]

0.75”[19.05mm]

0.25”[6.35mm]


TEKNOB0600421

30° Vertical Joiner Strip

Typical Use:• To build a stable and neat frameworkcorner from two Support Beams mated andconnected end-to-end at a 30° mitered joint.The fitting is placed in the T-slots andclamped against the slot with Set Screws.

Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or MachineScrews for connecting beams and attach-ments.



Hardware Recommended for Assembly:• 5/16” - 18 x 5/16” Stainless Steel SetScrews (31C31KKCS), 4 each.

Assembly Note:The ends of the two Support Beams have tobe cut at 15° to form the 30° mating angle.

.

4.34” [110.24mm]

2.13” [53.98mm]1.81”

[46.05mm]

30°

0.88” [22.23mm]

5/16-18TAPPED

(4 PLACES)

0.75”[19.05mm]

0.38”[9.52mm]

0.38”[9.52mm]

0.25”[6.35mm]


TEKNOB0600521


Typical Use:• To build a stable and neat framework cornerfrom two Support Beams mated and con-nected end-to-end at a 45° mitered joint. Thefitting is placed in the T-slots and clampedagainst the slot with Set Screws.





Assembly Note:The ends of the two Support Beams have tobe cut at 22.5° to form the 45° mating angle.

.

4.16” [105.61mm]

2.13” [53.98mm]

5/16-18TAPPED

(4 PLACES)

2.25” [57.23mm]

45°

0.88” [22.23mm]

0.75”[19.05mm]

0.38”[9.52mm]

0.38”[9.52mm]

0.25”[6.35mm]


TEKNO

B060062160° Vertical Joiner Strip

Typical Use:• To build a stable and neat frameworkcorner from two Support Beams mated andconnected end-to-end at a 60° mitered joint.The fitting is placed in the T-slots andclamped against the slot with Set Screws.

Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or MachineScrews for connecting beams and attach-ments.





.3.84” [97.46mm]

5/16-18TAPPED

(4 PLACES)

2.59”[65.79mm]

60°

2.13” [53.98mm]0.38”

[9.52mm]

0.75”[19.05mm]

0.88”[22.23mm]

0.25”[6.35mm]

0.38”[9.52mm]


TEKNOB0600721


Typical Use:• To build a stable and neat framework cornerfrom two Support Beams mated and con-nected end-to-end at a 90° mitered joint. Thefitting is placed in the T-slots and clampedagainst the slot with Set Screws.






.

0.38”[9.52mm]

2.88”[73.03mm]

0.88”[22.35mm]

0.25”[6.35mm]

0.75”[19.05mm]

0.38”[9.52mm]


TEKNOB0600821

30° Horizontal Joiner Strip

Typical Use:• An alternative to the 30° Vertical JoinerStrip to build a stable and neat frameworkcorner from two Support Beams mated andconnected end-to-end at a 30° mitered joint.The fitting is placed in the T-slots andclamped against the slot with Set Screws.

Features:• Four pre-tapped 5/16” holes accommodateSet Screws, Cap Screws, or MachineScrews for connecting beams and attachments.




Assembly Note:The ends of the two Support Beams have tobe cut at 15° to form the 30° mating angle

.


TEKNOB0600921


Typical Use:• An alternative to the 45° Vertical JoinerStrip to build a stable and neat frameworkcorner or joint from two Support Beamsmated and connected end-to-end or end-to-side. The fitting is placed in the T-slotsand clamped against the slot with SetScrews.





Assembly Note:The 45° Horizontal Joiner Strip may connecttwo beams end-to-end or end-to-side usingtwo different configuration of beam cuts:

• Each end of the two Support Beams to bemated can be cut at 22.5° to form the 45°mating angle.

OR

• One Support Beam can be cut at a 45°miter joint and fastened along the side of theadjoining beam. This allows lateral position-ing of the mitered beam anywhere along thelength of the beam to which it is connected.

.

0.35”[8.76mm]

0.38”[9.52mm]

5/16-18TAPPED

(4 PLACES)

0.75”[19.05mm]

0.88” [22.23mm]

3.80” [96.62mm]

1.75”[44.53mm]

45°

0.25”[6.35mm]


TEKNOB0601021


Typical Use:• An alternative to the 60° Vertical JoinerStrip to build a stable and neat frameworkcorner or joint from two Support Beamsmated and connected end-to-end or endto-side. The fitting is placed in the T-slotsand clamped against the slot with SetScrews.





Assembly Note:The 60° Horizontal Joiner Strip may connecttwo beams end-to-end or end-to-side usingtwo different configuration of beam cuts:• Each end of the two Support Beams to bemated can be cut at 30° to form the 60°mating angle.

OR

• One Support Beam can be cut at a 60°miter joint and fastened along the side of theadjoining beam. This allows lateral positioningof the mitered beam anywhere along thelength of the beam to which it is connected.

.


TEKNOB0601121


Typical Use:• An alternative to the 90° Vertical JoinerStrip to build a stable and neat frameworkcorner or joint from two Support Beamsmated and connected either end-to-end at a90° mitered joint or perpendicular to oneanother end-to-side with square ends. Thefitting is placed in the T-slots and clampedagainst the slot with Set Screws.





Assembly Note:The 90° Horizontal Joiner Strip may connecttwo beams end-to-end or end-to-side usingtwo different configuration of beam cuts:

• Each end of the two Support Beams to bemated can be cut at 45° to form the 90°mating angle.

OR

• One Support Beam can be cut at a normal90° and fastened along the side of theadjoining beam. This allows lateralpositioning of the mitered beam anywherealong the length of the beam to which it isconnected.

.

5/16-18TAPPED

(4 PLACES)

0.38”[9.52mm]

0.35”[8.76mm]

0.75”[19.05mm]

0.88”[22.23mm]

0.25”[6.35mm]

2.38”[60..33mm]


TEKNO



SUPPORT FEET & CASTERS

5-1

1X1 Slot CenterAngle Fixed Foot

H0200121Page 5-4

2X2 Slot CenterAngle Fixed Foot

H0200221Page 5-5

3x3 Slot CenterAngle Fixed Foot

H0200321Page 5-6

1X1 Slot LevelingFoot Support

H0200421Page 5-7


H0200521Page 5-8


H0200621Page 5-9

Teardrop LevelingFoot w/ 1/2”-13

StemH0200721Page 5-10

Teardrop LevelingFoot w/ 3/4”-10

StemH0200821Page 5-11

1X1 Slot TeardropLeveling Foot

AssemblyH0200921Page 5-12





All Metal Leveling Footwith 1/2”-13 Stem

H0201221Page 5-15

All Metal Leveling Footwith 3/4”-10 Stem

H0201321Page 5-16

Leveling Foot with1/2”-13 Stem & Jam Nut

H0201421Page 5-17

TEKNO

Rigid Casters

Rigid Caster with 5”Diameter Wheel

H0300421Page 5-21

Rigid Caster with 3”Diameter Wheel

H0300521Page 5-22

Rigid Caster Assemblies

1X1 Slot RigidCaster Assy.

H0300611Page 5-23


H0300711Page 5-24


H0300811Page 5-25

Rigid Caster Mounting Plates

1X1 Slot RigidCaster PlateH0300121Page 5-18

2X2 Slot RigidCaster PlateH0300221Page 5-19

3X3 RigidCaster PlateH0300321Page 5-20

Swivel Casters W/O Brakes

Swivel Casterwith

1/2” StemH0300921Page 5-26

Swivel Casterwith

3/4” StemH0301021Page 5-27

Swivel Casters with Brakes

Swivel Caster with1/2” Stemand BrakeH0301121Page 5-28

and BrakeH0301221Page 5-29

Swivel Caster with3/4” Stem

TEKNOTEKNOTEKNOTEKNOTEKNOSUPPORT FEET & CASTERS

5-2

Swivel Caster Assemblies W/O Brakes

1X1 Slot Swivel CasterAssemblyH0301311Page 5-30



Swivel Caster Assemblies with Brakes

1X1 Slot Swivel CasterAssembly with Brake

H0301611Page 5-33

2X2 Slot Swivel CasterAssembly with Brake

H0301711Page 5-34

3X3 slot Swivel CasterAssembly with Brake

H0301811Page 5-35

TEKNOTEKNOTEKNOTEKNOTEKNO SUPPORT FEET & CASTERS

5-3

TEKNO5-4SUPPORT FEET & CASTERS

H02001211 x 1 Slot Center Angle

Fixed Foot

Typical Use:• Fixed support base for 1 x 1 slot supportbeam legs. Primarily designed for guardingand lighter-weight, non-load bearing applica-tions.

Features:• Solid base for mounting beam to the floorto provide and anchor for machine guarding,benches, etc.• T-slots on two sides of the support beamare accessible to within 0.25” [6.35mm] ofthe floor.• Pre-drilled holes for lagging to the floor.

Material:Hot Rolled Steel, Black Powder Coated

Weight:3.75 lbs [1.70 kgs]

Hardware Recommended for Assembly:For attachment to support beam:• 5/16” - 18 x 5/8” Button Head Cap Screws(31C62KBC), 4 each.• Double Square Nuts (H0100721), 4 each.

OR

• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 4 each.• Double Square Nuts (H0100721), 4 each.

For attachment to floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 4 each.

.

4.00” [101.60mm]

1.00” [25.40mm]

0.25” [6.35mm]

Ø0.53” [Ø13.46mm](4 PLACES)

1.94” [49.23mm]

Ø0.34” [Ø8.64mm](4 PLACES)

0.81” [20.62mm]

6.25” [158.75mm]4.75” [120.65mm]

1.25” [31.75mm]0.25” [6.35mm]

TEKNO 5-5SUPPORT FEET & CASTERS


Fixed Foot

Typical Use:• Fixed support base for 2 x 2 slot supportbeam legs. Primarily designed for guardingand lighter-weight, non-load bearingapplications.

Features:• Solid base for mounting beam to the floorto provide and anchor for machine guarding,benches, etc.• T-slots on two sides of the support beamare accessible to within 0.25” [6.35mm] ofthe floor.• Pre-drilled holes for lagging to the floor.




OR

• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• Double Square Nuts (H0100721), 8 each.For attachment to floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 4 each.

.



Fixed Foot

Typical Use:• Fixed support base for 3 x 3 slot supportbeam legs. Primarily designed for guardingand lighter-weight, non-load bearing applica-tions.

Features:• Solid base for mounting beam to the floorto provide and anchor for machine guarding,benches, etc.• T-slots on two sides of the support beamare accessible to within 0.25” [6.35mm] of thefloor.• Pre-drilled holes for lagging to the floor.




OR

• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 8 each.• Double Square Nuts (H0100721), 8 each.

For attachment to floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 4 each.

.

6.00” [152.40mm]

Ø0.53” [Ø13.46mm](4 PLACES)1.00” [25.40mm]

0.25”[6.35mm]

2.06” [52.40mm]

Ø0.34” [Ø8.64mm](8 PLACES)

5.50” [139.70mm]

1.25” [31.75mm]

0.25” [6.35mm]

8.25” [209.55mm]


H02004211 x 1 Slot Leveling

Foot Support

Typical Use:• Mounts to 1 x 1 slot support beams toprovide a base for the foot.

Features:• Pre-drilled holes for mounting to 1 x 1 slotsupport beam.• Tapped hole which accepts a 1/2” shaft forvertical adjustment.



Hardware Recommended for Assembly:• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.

Assembly Note:• Surface “A” must be assembled flush withthe end of the 1 x 1 Slot Support Beam, i.e.the flange will not fit into the extrusion cavityfor reverse mounting.

.



Foot Support






Assembly Note:• Unlike the 1 x 1 Slot Leveling FootSupport, either the top or the bottom surfacecan be assembled flush with the end of the2 x 2 Slot Support Beam, i.e. the flange willfit into the extrusion cavity for reversemounting.

.



Foot Support






Assembly Note:• Unlike the 1 x 1 Slot Leveling Foot Support,either the top or the bottom surface can beassembled flush with the end of the 3 x 3 SlotSupport Beam, i.e. the flange will fit into theextrusion cavity for reverse mounting.

.

TEKNOH0200721

Teardrop Leveling Foot1/2” - 13 Stem

Typical Use:• Leveling foot for support beam legs.Specifically designed for mating with 1 x 1Slot Leveling Foot Supports.

Features:• Three holes in the base for use in laggingto the floor.• Teardrop shape facilitates lagging whenclearance for lag bolt drilling is needed.• Easy height adjustment with 1/2” mountingrod and included adjustment nut.

Weight Capacity:1,200 lbs [544 kgs] static load

Materials:• Stem & Leveling Nut: Zinc-plated Steel• Base: Glass-filled Nylon


Hardware Recommended for Assembly:• None.Hardware Recommended for Attachmentto the Floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 3 each.

.

5-10SUPPORT FEET & CASTERS


H0200821Teardrop Leveling Foot

3/4” - 10 Stem

Typical Use:• Leveling foot for support beam legs.Specifically designed for mating with 2 x 2and 3 x 3 Slot Leveling Foot Supports.Intended for supporting heavier loads.

Features:• Three holes in the base for use in laggingto the floor.• Teardrop shape facilitates lagging whenclearance for lag bolt drilling is needed.• Easy height adjustment with 3/4” mountingrod and included adjustment nut.


Materials:• Stem & Leveling Nut: Zinc-plated Steel• Base: Glass-filled Nylon


Hardware Recommended for Assembly:• None.Hardware Recommended for Attachmentto the Floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 3 each.

.

TEKNOH0200911

1 x 1 Slot Teardrop Leveling FootAssembly

Typical Use:• Leveling foot and accompanying 1 x 1 SlotLeveling Foot Support and hardware specificallydesigned for mating with 1 x 1 SlotSupport Beam legs.

Features:• Three holes in the base for use in laggingto the floor.• Teardrop shape facilitates lagging whenclearance for lag bolt drilling is needed.• Easy height adjustment with 1/2” mountingrod and included adjustment nut.• Mounting hardware included as describedbelow.


Materials:• Stem & Leveling Nut: Zinc-plated Steel• Base: Glass-filled Nylon• Support (provides mounting surface forsupport beam): Pressure Die-cast Aluminum• Socket Head Cap Screws: 18 - 8 StainlessSteel


Hardware Included:• Teardrop Leveling Foot with 1/2” - 13 Stem(H0200721), 1 each.• 1 x 1 Slot Leveling Foot Support(H0200421), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 1/2” - 13 Standard Hex Nut (50CNFHZ), 1each.

Hardware Recommended for Attachmentto the Floor:• 3/8” diameter x 3 3/4” length WedgeAnchors (37C375AWG), 3 each.

.


TEKNO SUPPORT FEET & CASTERS

Notes:


H02010112 x 2 Slot Teardrop Leveling Foot

Assembly

Typical Use:• Leveling foot and accompanying 2 x 2 SlotLeveling Foot Support and hardware specificallydesigned for mating with 2 x 2 SlotSupport Beam legs.







.


H02011113 x 3 Slot Teardrop Leveling Foot

Assembly

Typical Use:• Leveling foot and accompanying 3 x 3 SlotLeveling Foot Support and hardware specifi-cally designed for mating with 3 x 3 SlotSupport Beam legs.







.

6.75” [171.45mm]

3.88” [98.43mm]0.50”

[12.70mm]0.53”

[13.46mm]

3.69”[93.73mm]

4.75”[120.65mm]Ø0.50”

[Ø12.70mm](3 PLACES)

2.22” [56.49mm]UPWARD ADJUSTMENT

0.92” [23.42mm]DOWNWARD ADJUSTMENT

6.00”[152.40mm]

8.22”[208.89mm]


H0201221All Metal Leveling Foot with 1/2” -

13 Stem

Typical Use:• Leveling foot for support beam legs.Specifically designed for mating with 1 x 1Slot Leveling Foot Supports (H0200421).

Features:• Easy height adjustment with includedadjustment nut.

Weight Capacity:5,000 lbs [2,268 kgs] static load

Material:Yellow Zinc-plated Steel


Hardware Recommended for Assembly:• None.

.


H0201321All Metal Leveling Foot with 3/4” -

10 Stem

Typical Use:• Leveling foot for support beam legs.Specifically designed for mating with 2 x 2and 3 x 3 Slot Leveling Foot Supports(H0200521 & H0200621 respectively).

Features:• Easy height adjustment with includedadjustment nut.

Weight Capacity:7,400 lbs [3,357 kgs] static load

Material:Yellow Zinc-plated Steel



.


H0201421Leveling Foot with

1/2” - 13 Stem

Typical Use:• Leveling foot for the support of light dutyapplications such as table top applications,small tables, etc.

Features:• Non-skid base.• Easy height adjustment with screw driverand included adjustment nut.

Weight Capacity:700 lbs [318 kgs] static load

Materials:• Stem & Shell: Chrome-plated Steel• Base: Grey Nylon



.


H03001211 x 1 Slot Rigid Caster Adapter

Plate

Typical Use:• To connect a rigid caster to a 1 x 1 SlotSupport Beam.

Features:• Provides a transition plate for the mountingof an appropriate rigid caster to the end of a 1x 1 Support Beam.

Material:• Clear Anodized Aluminum


Hardware Recommended for Assembly:• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.

.



Plate






.



Plate






.


H0300521Rigid Caster with 3.0 in

[76.2 mm] Diameter Wheel

Typical Use:• Fixed caster with a 3.0 in [76.2 mm] wheelfor mating with a 1 x 1 Slot Rigid CasterAdapter Plate (B0500121).

Features:• Heavy gauge cold rolled steel, formed forstrength.

Weight Capacity:150 lbs [68 kgs]

Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.



.


H0300421Rigid Caster with 5.0 in [127.0 mm]

Diameter Wheel

Typical Use:• Fixed caster with a 5.0 in [127.0 mm]wheel for mating with a 2 x 2 or 3 x 3 SlotRigid Caster Mounting Plate (H0300211 &H0300321 respectively).

Features:• Heavy gauge cold rolled steel, formed forstrength.





.


H03006111 x 1 Slot Rigid Caster Assembly

Typical Use:• Assembly mounts to the end of a 1 x 1 SlotSupport Beam (E0100201) to provide fixedcaster mobility.

Features:• All mounting hardware included.


Materials:• Wheel: Cushion Tread Rubber.• Housing: Mild Steel, Bright Zinc Plated.• Mounting Plate: Clear Anodized Aluminum.


Assembly Hardware Included:• Rigid Caster with 3.0” [76.2mm] DiameterWheel (MEAAD0700V015), 1 each.• 1 x 1 Slot Rigid Caster Adapter Plate(H0300121), 1 each.• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.


.

3.63” [92.08mm]

0.50” [12.70mm]

4.13” [104.78mm]

Ø3.00” [Ø76.20mm]

2.38” [60.33mm]








Assembly Hardware Included:• Rigid Caster with 5.0 in [127.0 mm]Diameter Wheel (MEAAD0700V016), 1 each.• 2 x 2 Slot Rigid Caster Adapter Plate(H0300211), 1 each.• 1/4” - 20 x 1” Socket Head Cap Screws(25C100KCSS), 4 each.• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 4 each.


.








Assembly Hardware Included:• Rigid Caster with 5.0 in [127.0 mm]Diameter Wheel (MEAAD0700V016), 1 each.• 3 x 3 Slot Rigid Caster Adapter Plate(H0300321), 1 each.• 1/4” - 20 x 1” Socket Head Cap Screw(25C100KCSS), 4 each.• 1/4” - 20 x 5/8” Socket Head Cap Screw(25C62KCSS), 4 each.


.

3.63” [92.08mm] 3.38” [85.73mm]

0.50” [12.70mm]

6.25” [158.75mm]

Ø5.00”[Ø127.00mm]


H0300921Swivel Caster with 1/2” Stem

Typical Use:• Caster with a 1/2” stem for mating with a 1x 1 Slot Leveling Foot Support.

Features:• Caster swivels 180° upon double ballbearings and hardened raceways.




Hardware Recommended for Assembly:• 9/16” x 2 1/2” Caster Washer(56N250WSDZ/125), 1 each..


H0301021Swivel Caster with 3/4” Stem

Typical Use:• Caster with a 3/4” stem for mating with 2x 2 and 3 x 3 Slot Leveling Foot Supports.

Features:• Caster swivels 180° upon double ballbearings and hardened raceways.




Hardware Recommended for Assembly:• 13/16” x 2 1/2” Caster Washer(81N250WSDZ/125), 1 each.

.


H0301121Swivel Caster with 1/2” Stem with

Brake

Typical Use:• Brakeable caster with a 1/2” stem formating with a 1 x 1 Slot Leveling FootSupport.

Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• Built-in brake mechanism.




Hardware Recommended for Assembly:• 9/16” x 2 1/2” Caster Washer(56N250WSDZ/125), 1 each.

.


H0301221Swivel Caster with 3/4” Stem with

Brake

Typical Use:• Brakeable caster with a 3/4” stem formating with 2 x 2 and 3 x 3 Slot Leveling FootSupports.

Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• Built-in brake mechanism.




Recommended Hardware for Assembly:• 13/16” x 2 1/2” Caster Washer(81N250WSDZ/125), 1 each.

.


H03013111 x 1 Slot Swivel Caster Assembly

Typical Use:• Assembly mounts to the end of a 1 x 1Slot Support Beam to provide swivel castermobility.

Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• 1/2” diameter rod.• Mounting hardware included.




Assembly Hardware Included:• Swivel Caster with 1/2” - 13 Stem(H0300921), 1 each.• 1 x 1 Slot Leveling Foot Support(H0200421), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 9/16” x 2 1/2” Caster Washer(56N250WSDZ/125), 1 each.


.



Typical Use:• Assembly mounts to the end of a 2 x 2 SlotSupport Beam to provide swivel castermobility.







.



Typical Use:• Assembly mounts to the end of a 3 x 3Slot Support Beam to provide swivel castermobility.






Hardware Recommended for Assembly:• None

.



with Brake

Typical Use:• Assembly mounts to the end of a 1 x 1 SlotSupport Beam to provide brakeable swivelcaster mobility.

Features:• Caster swivels 180° upon double ballbearings and hardened raceways.• 1/2” diameter rod.• Built-in on/off brake mechanism.• Mounting hardware included.




Assembly Hardware Included:• Swivel Caster with 1/2” - 13 Stem withBrake (H0301121), 1 each.• 1 x 1 Slot Leveling Foot Support(H0200421), 1 each.• 1/4 - 20 x 1 PanTorx Type F Plated(25C100PTFZ), 4 each.• 9/16” x 2 1/2” Caster Washer(56N250WSDZ/125), 1 each.


.

1/2” - 13 X 1 1/2”STEM

3.96” [100.66mm]SWIVEL RADIUS

1.38” [35.05mm]OFFSET

Ø3.00”[Ø76.20mm]

WHEEL

4.80” [121.82mm]LOAD HEIGHT

1.50” [38.02mm]

3.94” [100.00mm]



with Brake








.

TEKNOH0301811

3 x 3 Slot Swivel Caster Assemblywith Brake








.

3/4” - 10 X 1 3/4”STEM

4.47” [113.49mm]SWIVEL RADIUS

1.44” [36.53mm]OFFSET

Ø5.00”[Ø127.00mm]

WHEEL

7.58” [192.56mm]LOAD HEIGHT

6.06” [153.87mm]

1.75” [44.45mm]


TEKNO SUPPORT FEET & CASTERS

Notes:

TEKNO



TEKNO 6-1ASSEMBLY HARDWARE

T - Bolts Set Screws

Nuts

Torx Screw

T - BoltsPart Nos. Shown in TBOLT

Ordering ChartPage 6-3

Cup Point Socket SetScrews

Part Nos. Shown inSHSS Ordering Chart

Page 6-4

Nylon insert HextLock Nuts

Part Nos. Shown inHLNUT Ordering Chart

Page 6-4

Thin Spring StrutNuts

Part Nos. Shown inSPRING NUT Ordering

ChartPage 6-6

Double Square Nut-5/16”-18 & 1/4”-20

H0100721Page 6-6

Torx Screw1/4-20x1

25C100PTFZPage 6-7

Flange Nut5/16”-18

31CNNEFWPage 6-5

6 Lobe Flat Head ThreadCutting Cap Screw, Type F

1/4” - 20 x 1 1/4”25C125TTFPage 6-4

Self Tapping Screws

Self Tapping ScrewFor Guide Rail

#8 x 1/4”8N25TPCPage 6-4

Screws

Flat Head Cap Screw1/2” - 13 x 7/8”

50C88KFCPage 6-5

Flat WashersPart Nos. Shown inFWASHER Ordering

Chart Page 6-7

Flat Caster WashersPart Nos. Shown inFCWasher Ordering

ChartPage 6-5

Washers

Lock WashersPart Nos. Shown in

LWASHER Ordering ChartPage 6-7

TEKNO6-2ASSEMBLY HARDWARE

Fastener Torque Recommendations

Application Fastener TypeRecommended

Torque (lbs.-ft.)

Corner Tab Bracket into Square Nut

5/16" - 18 Hex Head Cap Screw 16

Corner Tab Bracket into Square Nut

5/16" - 18 Button Head Cap Screw 16

End Plate into Support Beam

1/4" - 20 Flat Head Cap Screw 14

Heavy Duty Corner Tab Bracket into Square Nut

5/16" - 18 Flat Head Cap Screw 17

Square Nut into Support Beam T-slot 1/4" - 20 Socket Set Screw 8

Square Nut into Support Beam T-slot 5/16" - 18 Socket Set Screw 8

Web Brackets, etc. into 5/16" Lock Nut & Washer 5/16" - 18 T-Bolt 12

End of Support Beam 1/4" - 20 x 1 1/4" 6-Lobe Thread Cutting Screw 14

End of Support Beam 1/4" - 20 x 1" Socket Head Cap Screw 14

Web Bracket into Square Nut

5/16" - 18 Hex Head Cap Screw 16


T-BoltsTypical Use:• To secure mounting hardware to support beam T-slots.

Features:• Easy twist and locate installation from the side of the beam.• Indicator slot to identify proper orientation.• The T-Bolt is known to be fastened correctly when the indicator slot is perpendicular to the support beam T-slot.

Material:Low Carbon Steel, Zinc Plated.

0.75” [19.05mm]

0.23” [5.84mm]

5/16 - 18

L

0.42” [10.67mm]

20.22mm [0.80”]

5.34mm [0.21”]

27.34mm [1.08”]

M8 X 125 THD.

10.67mm [0.42”]

Part Number Description Length (L) Weight (lb/kg) List PriceH0100121 3/4" T-Bolt 0.98 in 0.03/0.01H0100221 7/8" T-Bolt 1.10 in 0.04/0.02H0100321 1" T-Bolt 1.23 in 0.04/0.02H0100421 1 1/4" T-Bolt 1.48 in 0.04/0.02H0100521 1 1/2" T-Bolt 1.73 in 0.05/0.02H0100621 M8-1.25 T-Bolt 27.34 mm 0.03/0.01

T-BOLT Ordering Chart:


6-Lobe Flat Head Thread Cutting Cap Screw,Type F

Cup Point SocketSet Screws

SHSS Ordering Chart:

Pa rt Num be r De scription Ma te ria l W e ight (lb/kg) List Price25C125TTF 1/4" - 20 x 1 1/4" Steel, B lack Oxide 0.02/0.01

Part Num ber De scription Materia l W e ight (lb/kg) List Price25C31KKCS 1/4" - 20 x 5/16" 18-8 Stainless S teel 0.01/0.0131C31KKCS 5/16" - 18 x 5/16" 18-8 Stainless S teel 0.01/0.131C37KKCS 5/16" - 18 x 3/8" 18-8 Stainless Steel 0.01/0.0110F100KKCS 10 - 32 x 1" 18-8 Stainless Steel 0.02/0.01

Nylon Insert Hex Lock Nuts

Features:• Nylon Locking Insert.

HLNUT Ordering Chart:Part Number Description Material Weight (lb/kg) List Price

31CNTEZ 5/16" - 18 Thin Height Steel, Zinc Plated 0.01/0.01.80CNNE M8 - 1.25 Steel, Zinc Plated 0.01/0.01

Pa rt Num be r De scription Ma te ria l W e ight (lb/kg) List Price8N25TPC #8 X 1/4" Steel,Black Oxide 0.02/0.01

Self Tapping-Screw, For Snap On Guide Rail


Flange Nuts

Part Number Description Material Weight (lb/kg) List Price31CNNEFW 5/16" - 18 Steel, Zinc Plated 0.01/0.01

Flat Head Cap Screw

Part Number Description Material Weight (lb/kg) List Price50C88KFC 1/2"-13 x 7/8" Steel,Black Oxide 0.01/0.01

Flat Caster Washers* Typical Use: To create a rotation plate between a

caster and a Leveling Foot Support.

Features: Distributes load across the caster’s ballbearings.

FCWASHER Ordering ChartPart Number Description Material Weight

(lb/kg)

56N250WSDZ/125

9/16” X 2 ½” (for ½” stem

caster)

Zinc Plated

Steel

0.01/0.001

81N250WSDZ/125

13/16” X 2 ½” (for ¾” stem

caster)

Zinc Plated

Steel

0.01/0.001


H0100721Double Square Nut -

5/16”-18 & 1/4”-20

Typical Uses:• To secure mounting hardware to supportbeam T-slots.• Used in place of a T-Bolt for increasedsurface contact with the T-slot profile toprovide high loading capacity.• Provides easy movement within the lengthof extrusion T-slots for easier positioning andadjustment of attachments.

Features:• Secured in T-slots with 1/4” - 20 or 5/16” -18 set screws and attached to hardware with1/4” - 20 or 5/16” - 18 screws.


Hardware Recommended for Assembly:• 1/4” - 20 Cup Point Socket Set Screw(25C31KKCS), 1 each.• 5/16” - 18 Cup Point Socket Set Screw(31C31KKCS), 1 each.

.

Thin Spring Strut NutsTypical Use:• To secure mounting hardware to support beam T-slots.

Features:• The design allows for the insertion of the nut into SupportBeam T-slots from the side of the extrusion.• The nut is held in place by the compressed spring untiltightened by a screw.

SPRING NUT Ordering Chart:Pa rt Num be r De scription Ma te ria l W e ight (lb/kg) List Price

/G1534 1/4" - 20" S teel, Zinc P lated 0.03/0.01/G1532 10 32 S teel, Zinc P lated 0.04/0.02

0.38” [9.52mm]

0.38” [9.52mm]

0.38” [9.52mm]

0.25”[6.35mm]

1.00”[25.40mm]

0.75”[19.05mm]


Pa rt Num be r De scription M a te ria l W e ight (lb/kg) List Price25C100P TFZ 1/4" - 20 x 1 Zinc P lated S teel 0.04/0.02

1/4-20 X 1 PAN TORX TYPE F ZINC PLATED

Part Number Description Material Weight (lb/kg) List Price25NWSAZ 1/4" Steel,Zinc Plated,Grade 8 0.01/0.01

68N34WSDZ/089 5/16" Steel,Zinc Plated,Grade 8 0.01/0.0137NWSAZ 3/8" Steel,Zinc Plated,Grade 8 0.01/0.0150NWSAZ 1/2" Steel,Zinc Plated,Grade 8 0.01/0.0175NWSAZ 3/4" Steel,Zinc Plated,Grade 8 0.01/0.01

Lock Washers

LWASHER Ordering Chart:

Part Number Description Material Weight (lb/kg)

25NLOCZ

¼”

Zinc Plated Steel Medium Carbon,

Heat Treated

0.01/0.001

31NLOCZ

5/16”


Heat Treated

0.01/0.001

37NLOCZ

3/8”


Heat Treated

0.01/0.001

TEKNO7-1BEAM END CAPS

Beam End Caps

Typical Uses:• To cover the exposed ends ofSupport Beams.• Presents a neat, finished lookwhen used to complete astructure.

Features:• Push-lock tabs secure the endcaps during assembly withoutthe use of special tools.• The end caps may be removedfrom beam ends without damage,so they can be used again.

Material:Black Nylon.

Hardware or Tools Requiredfor Assembly:• None.

Tri-Slot End CapH0400121Page 7-2

1 x 1 Slot End CapH0400221Page 7-2

1 x 3 Slot EndCapH0400421Page 7-3



Guide Rail Lead InH0900221Page 7-5



TEKNO 7-2BEAM END CAPS

H0400121Tri-Slot End Cap1.28 in x 1.00 in

[32.51 mm x 25.40 mm]


.

H04002211 x 1 Slot End Cap

1.63 in [41.40 mm] Square


.

1.28” [32.61mm]

1.00” [25.40mm]

0.75” [19.05mm]

0.50” [12.70mm]

0.25” [6.35mm]

0.75” [19.02mm]

0.25” [6.35mm]0.25” [6.35mm]

1.63” [41.28mm] 1.13” [28.58mm]

TEKNO


1.63 in x 3.38 in[41.40 mm x 85.85 mm]


.

0.25” [6.35mm]

1.13” [28.58mm]

0.75” [19.05mm]

2.88” [73.03mm]0.25” [6.35mm]

1.62” [41.10mm]

3.38” [85.73mm]

7-3BEAM END CAPS


1.63 in x 2.50 in[41.40 mm x 63.50 mm]


.

TEKNO 7-4BEAM END CAPS


2.50 in x 3.38 in[63.50 mm x 85.85 mm]


.

0.25” [6.35mm]

2.50” [63.50mm]

0.75” [19.02mm]

0.25” [6.35mm]2.88” [73.03mm]

3.37” [85.67mm]

2.00” [50.80mm]




.

TEKNO7-5BEAM END CAPS

0.25” [6.35mm]

3.37” [85.70mm]

0.75” [19.02mm] 0.25” [6.35mm]

2.88” [73.03mm]




.

H0900221Guide Rail Lead In

Weight:0.02 lb

.

Hardware Recommended forAssembly: Self-Tapping Screw forSnap-On Guiderail (pp 6-4)

TEKNONotes:

7-5 BEAM END CAPS

TEKNO7-6 BEAM END CAPS

Notes:

TEKNO 8-1ELECTRICAL COMPONENTS

Standard Aluminum Wireway Components

Wireway Junction Components 45° Wireway Junction Components

Plastic Wireway Junction Boxes

WirewayE0600121Page 8-2

Wireway CoverE0600221Page 8-3

Wireway DividerH0600121Page 8-4

Wireway End PlateH0500121Page 8-5

Wireway JunctionE0600321Page 8-6

Wireway Junction End PlateH0500221Page 8-7

45° Wireway Junction CoverE0600421Page 8-8

45° Wireway Junction End PlateH0500321Page 8-9

Plastic WirewayE0500121Page 8-10

3-Hole 45°Junction Box

V0201111Page 8-11


V0200611Page 8-14


V0200411Page 8-12


V0200511Page 8-13


V0200911Page 8-17


V0200711Page 8-15


V0200811Page 8-16

TEKNOE0600121

Wireway

Typical Use:• For the routing of air and electrical linesbetween termination points.

Features:• The standard Modu-Tek® T-slot configura-tion on each side of the extrusion allows theuse of standard mounting hardware to fastenthe wireway to all T-slotted structuralextrusions.• V-shaped indentation marks running alongthe length of three sides of the extrusionfacilitate the proper alignment of a knockoutpunch for the attachment of conduit fittings.• The standard 3 x 3 Slot End Cap(H0400721) fits the extrusion profile.• The open top with snap-in wireway coverallows easy access for wiring.

Material:6063-T6 Aluminum Alloy with a 201-R1 ClearAnodize Exterior Finish.


Weight Per Foot:1.99 lbs [0.90 kg]

Standard Length:20 ft [6.1 m]

Maximum Length Available:20 ft [6.1 m]

Assembly Notes:• 5/16” - 18 x 3/8” Set Screws(31C37KKCS) are required to be used inplace of 5/16” - 18 x 5/16” Set Screws(31C31KKCS) when joining wireway sec-tions together with joiner strips.• The knockout holes require a special toolto create. Please give the length andlocation of junction knockouts when order-ing.

.

8-2ELECTRICAL COMPONENTS

COVER CAN PIVOT TO 10°FROM THE VERTICAL PLANE

Ø0.23” [Ø5.72mm](4 PLACES)

2.88” [73.03mm] 3.35” [85.19mm]

0.25” [6.35mm]

3.38” [85.73mm]

0.81” [20.62mm]

0.25” [6.35mm] 2.88” [73.03mm]


E0600221Wireway Cover

Typical Use:• Provides a hinged cover for theModu-Tek® Wireway (E0600121).

Features:• Unique profile snaps onto the wirewayextrusion providing a hinged cover along theentire length of the wireway without the use offasteners.• The wireway extrusion is symmetrical,allowing the piece to be attached as either aright hand or left hand cover.• Profile design allows the cover to hingeopen 10° beyond the vertical position toprovide easy access for wiring.• Easy lift-off profile allows the cover to beremoved.






Hardware Required for Attachment toWireway:• None.

.

2.88” [73.03mm]

COVER CAN PIVOT TO 10°FROM THE VERTICAL PLANE

ON WIREWAY’S CYLINDRICAL PROFILE

WIREWAYEXTRUSION

TEKNO8-4ELECTRICAL COMPONENTS

H0600121Wireway Divider

Typical Use:• The steel wall divides Wireway (E0600121)into two equal-sized, parallel chambers.

Features:• Allows separation of electrical wiring andpneumatic air lines.• Can be used to separate wiring to avoidelectrical noise interference that can occurwhen these wires run together for longdistances.

Material:Mild Steel


Hardware Recommended for Assembly toCenter of Wireway Extrusion Trough:• 1” Double-sided Industrial Foam Tape(VHB4941), cut to length of Wireway Divider.

.0.38” [9.52mm]

2.88” [73.03mm]

0.75” [19.05mm]


H0500121Wireway End Plate

Typical Use:• The aluminum plate covers the exposedend of the Modu-Tek® Wireway (E0600121).

Features:• The structural integrity and material compo-sition of the part allows for the tapping of ahole in the center to accept standard conduitfittings.• Although the wireway extrusion end canalso accommodate the 3 x 3 Slot Plastic EndCap (H0400721), the aluminum Wireway EndPlate is the best choice for the secureattachment of conduit fittings.

Material:6063-T6 Aluminum Alloy with a Clear AnodizeFinish.


Hardware Recommended for Assembly toWireway:• 1/4” - 20 x 1 Pan Torx Screw Type F Plated(25C100PTFZ), 4 each.

.3.38” [85.73mm]

2.88” [73.03mm] 0.25” [6.35mm]

Ø0.28” [Ø7.11m](4 PLACES)

0.13” [3.18mm]

3.38” [85.73mm]


E0600321Wireway Junction

Typical Use:• Provides a 90° junction at the end of awireway section for the routing of air andelectrical lines between termination points.

Features:• The symmetrical design of the junctionprovides an open-style extrusion to facilitatethe addition of conduit fitting knockout holesfrom the inside of the extrusion.• Two pieces of the extrusion can be matedtogether and firmly secured between twoWireway Junction End Plates to form a fullyenclosed junction box.• Since the Wireway Junction is an extru-sion, various lengths can be accommodatedto create simple 90° or 45° elbow, “T” configu-rations, or junction boxes with terminationsfrom wireway to field devices.






Assembly Notes:• The junction extrusion halves slide togetherend-to-end.• The knockout holes require a special tool tocreate. Please give the length and location ofjunction knockouts when ordering.

.

4.67” [118.46mm]

4.67” [118.46mm]

4.00” [101.60mm]

4.00” [101.60mm]


H0500221Wireway Junction End Plate

Typical Use:• This aluminum plate covers the exposedends of two identical mated Modu-Tek®Wireway Junction halves (E0500121).

Features:• The structural integrity and material compo-sition of the part allows for the tapping of ahole in the center to accept standard conduitfittings.

Material:6061 Aluminum Alloy with a Clear AnodizeExterior Finish.


Hardware Recommended for Assembly toMated Wireway Junction Extrusions:• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 4 each.

. 4.00” [101.60mm]

4.67” [118.49mm]

Ø0.28” [Ø7.14mm](3 PLACES)

0.13” [3.18mm]

4.67” [118.49mm]


E060042145° Wireway Junction Cover

Typical Use:• Accommodates 45° wireway runs from theWireway Junction (E0600321).

Features:• An indentation mark running the length ofthe inside of the extrusion facilitates theproper alignment of a knockout punch for theattachment of conduit fittings.• The Wireway Junction and cover can bemated and secured firmly in place with themounting of a 45° Wireway Junction EndPlate (EEPPD0600V003) on each end.






Assembly Notes:• The Wireway Junction Cover must slidefrom the end of the Wireway Junction to matethe two parts.• The knockout holes require a special tool tocreate. Please give the length and location ofjunction knockouts when ordering.

.

5.66” [143.69mm]45°

1.11” [28.09mm]

1.79” [45.52mm]

4.67” [118.49mm]

1.79” [45.52mm]


H050032145° Wireway Junction

End Plate

Typical Use:• This aluminum plate covers the exposedends of the mated Modu-Tek® WirewayJunction (E0500121) and 45° WirewayJunction Cover (E060221).

Features:• The structural integrity and material compo-sition of the part allows for the tapping of ahole in the center to accept standard conduitfittings.

Material:6061 Aluminum Alloy with a Clear AnodizeExterior Finish.


Hardware Recommended for Assembly toMated Wireway Junction and 45° Wire-way Junction Cover Extrusions:• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 3 each.

.

4.67” [118.49mm]

4.00” [101.60mm] 0.13” [3.18mm]

Ø0.28” [Ø7.14mm](3 PLACES)

45°


E0500121Plastic Wireway1.00 in x 1.50 in

[25.40 mm x 38.10 mm]

Typical Use:• To neatly contain pneumatic tubes andelectrical cables along the length of supportstructure extrusion T-slots.

Features:• Flexible snap-in profile fits support structureextrusion T-slots.• The flexible hinge and snap-on lid allowseasy access to the wireway.• Witness lines along the full length of theextrusion allow for accurate positioning ofholes for the entry and exit of cables throughthe sides of the wireway.

Material:Black Dual Durometer Polyvinyl Chloride.


Hardware or Tools Recommended forAssembly:• None.

.1.50” [38.10mm]

1.00” [25.40mm]0.06” [1.60mm]

CLOSED VIEW

OPEN VIEW PLASTIC WIREWAY ASSEMBLEDTO 1 X 1 SUPPORT BEAM


V02011113-Hole Junction Box

Typical Use:• An enclosure for the mounting and wiring oftwo electrical components.

Features:• Allows two electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.

Materials:• Junction Box Extrusions: 6063-T6 Alumi-num Alloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.


Hardware Included:• 1-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction(E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.


.


V02004111-Hole 45° Junction Box



Materials:• Junction Box Extrusions: 6063-T6 AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.


Hardware Included:• 1-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction(E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.Hardware Recommended for Assembly:• None.

.





Materials:• Junction Box Extrusions: 6063-T6 AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.


Hardware Included:• 2-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction(E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.Hardware Recommended for Assembly:• None.

.



Typical Use:• An enclosure for the mounting and wiring ofthree electrical components.

Features:• Allows three electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.

Materials:• Junction Box Extrusions: 6063-T6AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.


Hardware Included:• 3-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction(E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.


.







Hardware Included:• 4-Hole 45° Wireway Junction Cover(E0600421), 1 each.• Wireway Junction (E0600321), 1 each.• 45° Wireway Junction End Plates(H0500321), 2 each.• 1/4” - 20 x 1 Pan Torx ScrewType F Plated(25C100PTFZ), 8 each.


.









.




Features:• Allows three electrical components to bemounted at a 45° angle.• Mounts to a Wireway extrusion (E0600121)when wireway knockouts are specified.• Can also be mounted to a conduit.Materials:• Junction Box Extrusions: 6063-T6AluminumAlloy with a Clear Anodize Finish.• End Plates: 6061 Aluminum Alloy with aClear Anodize Finish.• Button Head Cap Screws: 18-8 StainlessSteel.




.

TEKNO



TEKNO 9-1ACCESSORIES

T-Slot Covers

T- Slot Cover, SafetyYellow

E0500221Page 9-4

T-Slot Cover, BlackE0500321Page 9-4

Panels

Clear Polycarbon-ate

PanelH0700121Page 9-8

1” x 1” BlackPlastic-

Coated 12 GuageWire

Mesh PanelH0700421Page 9-9

Panel Retainers

Panel Retainerfor MeshPanels

H0700521Page 9-10

Corne

Panel Clamp

Panel Clamp T-SlotInsert

E0500521Page 9-5

2-Panel Door Slide T-SlotInserts

2 - Panel DoorSlide, TopE0500721Page 9-6

2 - Panel DoorSlide, Bottom

E0500721Page 9-7

Expanded MetalMesh PanelH0700221Page 9-8

1/2” x 1/2” BlackPlastic-

Coated 16 GuageWire

Mesh PanelH0700321Page 9-9

Panel Retainer forPlasticPanels

H0700621Page 9-11

Flat PanelRetainer Strip

E0501021Page 9-14

DoublePanel

RetainerStrip

E0500921Page 9-13

Panel Retainer Strips

PanelRetainer

StripE0500821Page 9-12

TEKNO

Plastic Door Handlefor Extrusion T-Slots

H0800221Page 9-18

Magnetic Catch Assemblies

Lift-Off Door Hinge,Left HandH0800521Page 9-21

Lift-Off Door Hinge,Right HandH0800811Page 9-22

Plastic Door Handles

Plastic Door Handlefor PanelsH0800711Page 9-17

Adjustable Door HingeH0800621Page 9-20

Door HingeH0800521Page 9-19

Nylon Door Hinges

Metal Handle Assemblies

Magnetic CatchAssembly, for Tri-Slot

Support BeamH0801011Page 9-26

Metal Handle Assembly,Non-Locking

H0800411Page 9-23

Metal HandleAssembly,Locking

H0800311Page 9-24

Magnetic CatchAssembly,H0800911Page 9-25

9-2ACCESSORIES

Corner Finishing Cap

Corner Finishing CapH0400821Page 9-15

Guide Wheel

Guide WheelH0801121Page 9-16

TEKNO

Corner ExtrusionE0502021Page 9-27

1x1 End BracketB0700521Page 9-28

Corner Extrusion

1x1 End Brackets

Tool Trolley

Tool Trolley AssemblyH1300311Page 9-29

Covered Roller

Covered RollerH0301921Page 9-27

1x1End Bracket SwivelB0700511Page 9-28

Cam RollerH1300211Page 9-29

9-3ACCESSORIES

TEKNO9-4ACCESSORIES

E0500221T-Slot Cover, Safety Yellow

E0500321T-Slot Cover, Black

Typical Use:• To cover T-slots.• To hold cables and piping in position.

Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.

Material:Rigid Polyvinyl Chloride Extrusion


Standard Length Available:16.0 ft [4.9 m]


Hardware or Tools RequiredFor Assembly:• None: installs by pressing into a standardT-slot of any Modu-Tek® extrusion.

.

0.19” [4.70mm]

0.47” [11.99mm]INSTALLEDIN T-SLOT


E0500521Panel Clamp T-Slot Insert

Typical Use:• To secure 7/32” stationary polycarbonatepanels in place within extrusion T-Slots forguarding and enclosures.

Features:• Flexible profile accepts various widths ofpolycarbonate sheeting.• No hardware required for assembly.

Material:Black Rigid Polyvinyl Chloride Extrusion




Hardware or Tools RequiredFor Assembly:• None.

Assembly Note:• Panels must be inserted before thecompletionof a closed assembly frame. The PanelT-Slot Clamp installs onto the polycarbonatesheet by pressing the open cavity of the PVCextrusion onto the edge of the panel, whilethe mated polycarbonate panel and clampinstalls by pressing into the T-Slot of asupport beam extrusion. A rubber mallet canbe used to tap the extrusion onto the edge ofthe polycarbonate panel.

.

TEKNO9-6ACCESSORIES

E05006212-Panel Door Slide, Top

Typical Use:• Holds the tops of two sliding panels inplace between two parallel beams.

Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.• Panels can be inserted after frameassembly.






Assembly Note:• Installs by pressing into T-slot. The slidingpanel height appropriate for a given spacebetween two parallel beams can be derived bysubtracting 0.81 in [20.57 mm] from thedistance between the bottom edge surface ofthe top beam and the top edge of the lowerbeam.

.


E05007212-Panel Door Slide, Bottom

Typical Use:• Holds the bottoms of two sliding panels inplace between two parallel beams.Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.• Panels can be inserted after frameassembly.






Assembly Note:• Installs by pressing into T-slot. Thesliding panel height appropriate for a givenspace between two parallel beams can bederived by subtracting 0.81 in [20.57 mm]from the distance between the bottom edgesurface of the top beam and the top edge ofthe lower beam.

.

TEKNO9-8ACCESSORIES

H0700221Expanded Metal Mesh Panel

Typical Use:• For guarding enclosure applications with allModu-Tek® extrusions.

Features:• 1.680 in x 0.563 in [42.672 mm x 14.300mm] openings.

Material:0.75 in [19.05 mm] #9 Flattened 0.13 in [3.30mm] Thick Powder Coated Yellow CarbonSteel

Weight Per Square Foot:1.75 lbs [0.79 kg]

Standard / Maximum Size:4.0 ft x 8.0 ft [1.2 m x 2.4 m] sheet

.

H0700121Clear Polycarbonate Panel


Features:• High Impact strength and durablilty, 0.22in [5.59mm] thick.

Weight Per Square Foot:1.50 lb [0.7 kg]


Custom Sizes:Cut sizes smaller than standard are available.

.


H07004211” x 1” Black Plastic-Coated 12

Guage Wire Mesh Panel


Features:• 1.00” [25.40mm] Square openings.



Custom Sizes:Cut sizes smaller than standard are available.

.

H07003211/2” x 1/2” Black Plastic-Coated 16

Guage Wire Mesh Panel


Features:• 0.50” [12.70mm] Square openings.



Custom Sizes:Cut sizes smaller than standard areavailable.

.

TEKNO9-10ACCESSORIES

H0700521Panel Retainer for

Mesh Panel

Typical Use:• To attach expanded metal panel to supportbeam extrusions in guarding enclosures.

Features:• Attaches to all support beams with stan-dard fastener hardware.• The retainer allows the expanded metal tobe seated into the T-slot, providing a com-pletely enclosed guard.

Material:1/8” Thick Mild Seel, Zinc Plated.


Hardware or Tools RequiredFor Assembly:

To Support Beam:• 5/16” - 18 x 3/4” T-Bolts (H0100121), 2each.• 5/16” Flat Washers (68N34WSDZ/089), 2each.• 5/16” Nylon Insert Thin Height Lock Nuts(31CNTEZ), 2 each.

To Mesh Panel:• 5/16” - 18 x 5/8” Hex Head Cap Screws(31C62HCS5Z), 2 each.• 5/16” Lock Washers (31NLOCZ), 2 each.• 2-Hole Strap Nut (B0600121), 1 each.

Assembly Note:• This panel retainer is not compatible withthe Tri-Slot Support Beam (E0100101).

.

0.84”[21.34mm]

Ø0.34”[Ø8.64mm]

0.63”[15.95mm]

1.75”[44.45mm]

2.50” [63.50mm]0.59”

[14.99mm]

1.44”[36.58mm]

3.34”[84.94mm]


H0700721Panel Retainer for

Plastic Panel

Typical Use:• To attach polycarbonate sheeting tosupport beam extrusions in guardingenclosures.

Features:• Attaches to all support beams withstandardfastener hardware.• The retainer allows a polycarbonate sheettobe firmly seated and secured into the Tslot,providing a completely enclosed guard.

Material:1/8” Thick Mild Steel, Zinc Plated.


Hardware or Tools RequiredFor Assembly:

To Support Beam:• 5/16” - 18 x 3/4” T-bolt (H0100121), 1 each.• 5/16” Flat Washer (68N34WSDZ/089), 1each.• 5/16” Nylon Insert Thin Height Lock Nut(31CNTEZ), 1 each.

To Polycarbonate Panel:• 5/16” - 18 x 3/4” Hex Head Cap Screw(31C75HCS5Z), 1 each.• 5/16” Flat Washer (68N34WSDZ/089), 1each.• 5/16” Nylon Insert Thin Height Lock Nut(31CNTEZ), 1 each.

Assembly Note:• This panel retainer is not compatible withthe Tri-Slot Support Beam (E0100101).

.


E0500821Panel Retainer Strip

Typical Use:• To secure 7/32” [5.56 mm] polycarbonatepaneling to T-slotted frame structures inguarding applications.

Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.




Hardware or Tools Required

For Assembly:• A special installation tool is recommendedand available upon request.

.


E0500921Double Panel Retainer Strip

Typical Use:• To secure 7/32” [5.56 mm] polycarbonatepaneling to T-slotted frame structures inguarding applications. Secures paneling toboth sides of the T-slot.

Features:• Flexible snap-in profile.• No hardware or special tools required toinsert into beam extrusions.• Reduces the amount of T-slotted beamrequired to complete a structure.




Hardware or Tools Required

For Assembly:• A special installation tool is recommendedand available upon request.

.


E0501021Flat Panel Retainer Strip

Typical Use:• To secure 7/32” [5.56 mm] polycarbonatepaneling to the flat-surfaced framingstructures,such as tubing, in guarding applications.

Features:• Flexible profile.




Hardware Recommended

For Assembly:• 1/4” - 20 x 3/8” Socket Head Cap Screws(25C37KCSS), quantity as needed per job.

.


H0400821Corner Finishing Cap

Typical Use:• To provide a finished look to individual 90°corners where Panel Retainer Strip,E0500821, is used.

Features:• The Cap covers the exposed ends of thePanel Retainer Strips, thereby, preventingthem from being pulled away from the beamslot.

Material:Black Nylon.

Weight:0.03 lb. [0.01 kg.]


For Assembly:• 1/4” - 20 x 7/8” Button Head Cap Screw(25C87KBC), 1 each.• Double Square Nut (H0100721), 1 each.

.


H0801121Guide Wheel

Typical Use:• As rollers to create panels that slide alongthe standard Modu-Tek® T-slotted extrusion.

Material:Polyamide

Weight:0.26 lb. [0.12 kg.]


For Assembly:• 5/16” x 5/8” Shoulder Bolt (31N62KSS), 1each.• 5/16” Flat Washer (68N34WSDZ/089), 1each.• Double Square Nut (H0100721), 1 each.

.


H0800121Plastic Door Handle

for Panels

Typical Use:• To be mounted as a handle to slidingpanels, doors, and access hatches.

Features:• Lightweight and sturdy.• 1/4” - 20 inserts accept standard screws forattachment to surfaces.

Material:Polypropylene-Copolymer



For Assembly:• 1/4” - 20 x 1/2” Flat Head Cap Screws(25C50KFCS), 2 each.Assembly Note:• Panel holes must be drilled andcountersunkto use handle with Flat Head CapScrews.

.

TEKNOH0800221

Plastic Door Handlefor Extrusion T-Slots

Typical Use:• To be mounted as a handle to extrusion T-slots.

Features:• Lightweight and sturdy.• 1/4” - 20 inserts accept standard screwsfor attachment to extrusions.

Material:Thermoplastic, Glass Fiber Reinforced


Hardware RecommendedFor Assembly:• 1/4” - 20 x 5/8” Socket Head Cap Screws(25C62KCSS), 2 each.• Double Square Nuts (H0100721), 2 each.• 5/16” - 18 x 5/16” Socket Set Screws withCup Points (31C31KKCS), 2 each.

Required in lieu of above listed 5/8” SocketHead Cap Screws (25C62KCSS) whenmounting to the Tri-Slot Support Beam(H0800221):• 1/4” - 20 x 1/2” Socket Head Cap Screws(25C50KCSS), 4 each.

.

1.02” [25.91mm]

Ø0.25” [Ø6.35mm] THROUGH,Ø0.41” [Ø10.41mm] X 0.35” [8.89mm] DEEP

1.61” [40.89mm]

0.24” [6.10mm]

1.34” [34.04mm]

3.75” [95.30mm]

4.61” [117.14mm]

5.47” [138.99mm]

9-18ACCESSORIES


H0800521Door Hinge

Typical Use:• Hinge for doors and swing-out or pivotingstructures.

Features:• Mounts directly to extrusion T-slots.

Material:Leaves: Reinforced Polyamide.Hinge Pin: AISI 304 Stainless Steel



For Assembly:• 1/4” - 20 x 1/2” Socket Head Cap Screws(25C50KCSS), 4 each.• Double Square Nuts (H0100721), 4 each.• 5/16” - 18 x 5/16” Socket Set Screws(31C31KKCS), 4 each.

Assembly Note:• This door hinge provides a wider gapbetween extrusions than the lift off hinges(H0800711 and H0800811).

.


H0800621Adjustable Door Hinge

Typical Use:• Hinge for doors, panels, and swing-out orpivoting structures.

Features:• Mounts directly to extrusion T-slots.• Provides either free or dampened doorswing motion.• Assists in holding door open, closed, orpartially open.

Materials:• Leaves: Black Acetal.• Hinge Pin: Clear Polycarbonate.• Adjusting Screw and Nut: 303 StainlessSteel.



For Assembly:

For attachment to T-Slot:• 1/4” - 20 Thin Spring Strut Nuts (/G1534), 2each.• 1/4 - 20 x 1/2” Socket Head Cap Screws(25C50KCSS), 2 each.

For attachment to polycarbonate sheet(H0700121) with drilled and tapped holes:• 1/4” - 20 x 1/2” Socket Head Cap Screws(25C50KCSS), 2 each.

For attachment to Tri-Slot Support Beam:• 1/4” - 20 x 3/8” Socket Head Cap Screws(25C37KCSS), 2 each.

Assembly Note:• For attachment of this hinge to Tri-SlotSupport Beams (H0800221), drill and tap two1/4” - 20 x 1/4” deep holes into center of solidside of extrusion on 1.88” [47.75mm]centers.

.


H0800711Lift-off Door Hinge, Left Hand


Features:• Attached door can be lifted off of its hinge.

Material:Glass-filled Nylon


Hardware RecommendedFor Assembly:• 3/4” T-Bolts (H0100121), 4 each.• 5/16” Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.

. 3.00” [76.20mm]

0.88” [22.23mm]

1.22” [30.96mm]1.28” [32.56mm]

0.81” [20.62mm]

0.88” [22.23mm]

2.50” [63.50mm]

5.00” [127.00mm]

0.81” [20.62mm]

Ø0.34” [Ø8.64mm]

0.88” [22.23mm]1.50” [38.10mm]


1.28” [32.56mm]

0.88” [22.23mm]

1.22” [30.96mm]

3.00” [76.20mm]

0.88” [22.23mm]

0.81” [20.62mm]

0.88” [22.23mm]

0.81” [20.62mm]

2.50” [63.50mm]

1.50” [38.10mm]Ø0.34” [Ø8.64mm]

5.00” [127.00mm]

H0800811Lift-off Door Hinge, Right Hand


Features:• Attached door can be lifted off of its hinge.

Material:Glass-filled Nylon


Hardware RecommendedFor Assembly:• 3/4” T-Bolts (H0100121), 4 each.• 5/16” Nylon Insert Thin Height Lock Nuts(31CNTEZ), 4 each.• 5/16” Flat Washers (68N34WSDZ/089), 4each.

.


H0800411Handle Assembly,

Non-locking

Typical Use:• To latch doors on cabinets and guarding.

Features:• Corrosion-resistant chrome finish.• 360° turn for right hand or left hand use.

Material:Bright Chrome, Zinc Die Cast.


Hardware Included with Assembly:• Handle (H0800411), 1 each.• 10 - 32 Spring Nuts (/G1532), 2 each.• 10 - 32 x 1/2” Flat Head Cap Screws(10F50KFCS), 2 each.• Nylon Washer (90295A185), 1 each.• Cam (H0800411), 1 each.


.

TEKNO

H0800311Handle Assembly, Locking

Typical Use:• To latch and lock doors on cabinets andguarding.

Features:• Corrosion-resistant chrome finish.• 360° turn for right hand or left hand use.• Keyed lock for security.

Material:Bright Chrome, Zinc Die Cast.


Hardware Included with Assembly:• Handle (H0800411), 1 each.• 10 - 32 Spring Nuts (/G1532), 2 each.• 10 - 32 x 1/2” Flat Head Cap Screws(10F50KFCS), 2 each.• Nylon Washer (90295A185), 1 each.• Cam (H0800411), 1 each.• Two working keys.


.

9-24ACCESSORIES


H0800911Magnetic Catch Assembly

Typical Use:• To latch panels in place.

Features:• Compact and rugged.• Self-aligning magnets assure full contactand maximum holding power.• Ten pounds of pull required to break contactbetween surfaces.

Material:• Body: Plastic.• Magnetic Poles & Striker Plate: Steel.


Hardware Included with Assembly:• Magnet and Striker Plate Set (H0850721), 1each.• 10 - 32 Spring Nuts (/G1532), 2 each.• 10 - 32 x 1/2” Socket Head Cap Screws(10F50KCSS), 2 each.• #6 x 1/4” Self-tapping Screw (6N25TXFZ), 1each.


Note:• To use a magnetic catch assembly with aframe built from Tri-Slot Beam extrusions,refer to the Magnetic Catch Assembly for Tri-Slot Beam (H0801011) on the next page.

.

TEKNOH0801011

Magnetic Catch Assembly for Tri-Slot Support Beam

Typical Use:• To latch panels in place when the Tri-SlotSupport Beam is used in a vertical positionasshown in the “typical installation” illustrationat right.

Note:The standard Magnetic Catch Assembly(H0800911) can be used with the Tri-SlotSupport Beam if the catch is mounted on thelong side of the beam.

Features:• Compact and rugged.• Self-aligning magnets assure full contactand maximum holding power.• Ten pounds of pull required to break contactbetween surfaces.

Material:• Body: Plastic.• Magnetic Poles & Striker Plate: Steel.• Mounting Plate: Aluminum.


Hardware Included with Assembly:• Magnet and Striker Plate Set (H0850721), 1each.• 10 - 32 Spring Nuts (/G1532), 2 each.• 10 - 32 x 3/8” Flat Head Cap Screws(10F37KFC), 2 each.• #6 x 1/4” Self-tapping Screw (6N25TXFZ), 1each.• 10 - 32 x 1/4” Socket Head Cap Screws(10F25KFCS), 2 each.• Mounting Angle Bracket (B0100821),1 each.


.

9-26ACCESSORIES


H0301921Covered Roller

Typical Use:• Cover Roller used on the Assembly of aPallet .

Features:• Excepts 3/8 and 10mm Flat Head Screw

Material:• Urethane,Sealed/Permanet LubricatedSealed Ball Bearing

Weight:

Hardware RecommendedFor Assembly:• 1/2”-13 x 7/8 Flat Head Cap Screw(1 each)

.

E0502021Corner Extrusion

pical Use:•Slide surface, Guide railFeatures:• Slide on corner of any support beam

Material:• High Density Polyethylene (UHMW)

Weight:

.


B07005211x1 End Bracket

Typical Use:Features:• Can attach to 1x1 Beam with self tappingtorx screws.• Can attach by using a 3/4” x 7/8 T-Bolt• Can be used as rollers by attaching acovered roller to it (H0301921).

Material:• Die Cast Zinc

Weight:

Hardware RecommendedFor Assembly:• 1/4 - 20 x 1 Torx Screw• 3/4 x 7/8 T-Bolt• 1/2”-13 x 7/8 Flat Head Cap Screw

.

B07005111x1 End Bracket Swivel

Assembly

Features:• Can attach to 1x1 Beam with self tappingtorx screws.• Can attach by using a 3/4” x 7/8 T-Bolt

Material:• Die Cast Zinc

Weight:

Hardware RecommendedFor Assembly:• 1/4 - 20 x 1 Torx Screw• 3/4 x 7/8 T-Bolt

.


H1300311Tool Trolley Assembly

Typical UseFeatures:• Mounting Over of tool balancers• Fixtures that need to move

Material:• Steel

Weight:

Hardware RecommendedFor Assembly:• 8 cam rollers (H1300211)• 8 Jam nuts

.

H1300211Cam Roller

Material:• Hardened Steel Sealed/Permanet BallBearing Lubrication

Weight:

.

TEKNO



TEKNO 10-1ADDITIONAL PRODUCTS & SERVICES

Stair Tread and WalkoversTekno’s Modu-Tek line also allows you to design and buildcompletely modular stair treads and walkovers for yourapplication. Built of the highest quality extruded anodizedaluminum, these structures provide lightweight, yet ultrasturdy platforms and staircases. Our tread plate materialis designed with a premium on safety; all of our treadplates feature raised rows of “teeth” for extra traction. Wealso offer vented tread plate that allows dirt and otheraccumulates to fall freely through the plate, virtuallyeliminating the risk of slippage. As is the case with anyModu-Tek product, these structures posess incredibleversatility and are easily configured/reconfigured for anyapplication; no drilling or tapping required! Call us today forfurther information on our Modu-Tek Walkovers and StairTreads!

TEKNO10-2ADDITIONAL PRODUCTS & SERVICES

FlowRacks/Gravity Racks

Looking for innovative materialhandling solutions? Modu-Tek byTekno signals the end of yoursearch! Our vast array of extru-sions and brackets have lendedthemselves wonderfully to thecreation of flow racks and gravityracks. These structures providefunctionality and durability thatgoes above and beyond anythingelse in the industry. With a frame-work constructed of our heavy dutyhard-anodized aluminum extrusion,these racks are sturdy enough tohandle virtually any load, yet lightenough to move and/or reconfigureat a moments notice.

As with any Modu-tek structure, ourskilled professionals can design andbuild a flow rack/gravity rack to meetyour specific needs. Or you may preferto have it shipped to you in kit form, andusing three simple hand tools, as-semble it yourself in minutes with nodrilling/tapping required! Regardless ofthe application, Tekno has the solutionto meet your needs. Call us today!


Systems Integration

Tekno Offers Turn-Key Manufacturing &Material Handling Systems IntegrationServices:

Tekno provides systems integration services toclients for projects large and small. With over 15years of experience in mainstream industry, bothdomestically and internationally, we have the provenknow-how, expertise, and product familiarity to makeyour automated production systems a success. Withinternal design, assembly, machining, control panelconfiguration, and programming capabilities, Teknooffers a breadth and depth of services worthy of theworld’s finest manufacturing facilities.

GEMINI® Conveyor Systems

Use Tekno’s own Gemini® Non-synchronous Con-veyor System for Palletized Product Assembly &Conveyance:

Tekno is an Original Equipment Designer and Manufacturer ofa world class line of modular non-synchronous conveyorcomponents. Gemini® conveyors can handle a wide variety ofproduct and carrier types, loads, sizes, and conveyancespeeds. Gemini® conveyors are extremely flexible inapplication, and they’re re-configurable when productionrequirements change. Hundreds of automated conveyance,assembly, and processing systems built from the well-established Gemini® System product line have been fieldedacross North America and beyond.

Custom Control Panels

Tekno has Internal Control Panel Design, Sourcing,Building, Programming, and Installation Capabilities:

Tekno designs and builds custom control panels, operatorinterface terminals, industrial computer enclosures, andfactory communications networks to customer specifications.All design work is performed by qualified engineers andtechnicians on AutoCAD workstations for convenient clientmodification and approval. Tekno’s in-house fabrication andassembly capability can provide enclosures, panel inserts,touch screens, and data collection / charting / display equip-ment of many styles and brands. Using the latest in designtechniques, materials, fabrication equipment, and third-partyhardware and software, Tekno’s engineers and technicianscan deliver the custom controls support you need for yourunique production and materials handling operations.

TEKNO10-4ADDITIONAL PRODUCTS & SERVICES

Custom Product Pallets

Check Out Tekno’s Own Internal Custom Pallet Design,Fabrication, and Build Capabilities:

Tekno can design and build product carriers of almostany size, shape, and composition, to very closetoleracnes. Tekno’s in -house fabrication, machining,and assembly capability can provide special fixtures,pallet electrification equipment, multiple-model cornerand prodcut support blocks, pallet-to-station lockingmethods, status flag, in -line product burn-in and testingfeatures, corner rollers, UHMW-PE glide edging, stoppercutouts, and raised aluminum pedestals, Send yourcustom applications our way.


Special Machinery

Tekno’s Skilled Engineers & Technicians CanDesign, Fabricate, Build, and Install Special

Machinery to Meet Your Needs:

Tekno’s engineering, machining, fabrication,assembly, and documentation departments provide awealth of capabilities in the creation and applicationof custom machinery. With specialists in convey-ance, part fixturing, material flow, heat treatment,furnaces and ovens, vertical product lifts, brazingtechnology, manufacturing processes, in-line gaug-ing, product inspection and testing, automationprogramming and robotic applications, Tekno canhandle many types of special equipment projects.Special machinery is pre-built in our facility, thentested, de-bugged, and run off for the customer priorto shipment and installation of the equipment. Tohelp your operators and maintenance techniciansbetter understand and care for your new machinery,Tekno also offers various levels of custom documen-tation and training packages.

TEKNO

Notes:

Documents

Modu Tek Catalog