Upload
gea-group
View
234
Download
0
Embed Size (px)
DESCRIPTION
http://preview.gea.com/global/en/binaries/model-t-pilot-plant_tcm11-17051.pdf
Citation preview
Membrane Filtration
Standard Features
• 30 gallon balance tank• Single stick ceramic housing, 0.2 to 0.5 M2 membrane area• Feed pump, rotary-lobe type with 1 HP VFD motor• Recirculation pump, centrifugal type with 5 HP motor• Heat exchanger, tubular type• Pressure indicators, feed and recirculation• Temperature indicator• Flowmeters, magnetic type for retentate and permeate
streams• Assembled on a tubular stainless steel base with casters• Control panel
Model T Membrane FiltrationPilot PlantThe GEA Filtration Model T pilot plant is a pilot-scale plantdesigned for application development of ceramic microfiltrationand ultrafiltration.The unit can be configured for evaluation of separation characteristics of up to three different membraneporosities in parallel or it may be used to optimize processparameters once a particular porosity of membrane has beendetermined. The Model T is specially designed to allow for very precise separations utilizing state-of-the-art, gradientlayered ceramic membranes operating under tightly controlledtransmembrane pressure. Alternately, it can be used for moreconventional ceramic membrane filtration applications.
The sophisticated control system design allows for convenientmanipulation of a variety of process variables including cross-flow velocity, operating pressure, temperature andtransmembrane pressure making the plant uniquely suited to complex molecular separations.
Unique Features
• Designed and built to take advantage of third generation,gradient layer ceramic membranes
• Excellent scale-up capabilities and accurate production scalesimulation
• Flexible control scheme for simple and wide variability ofkey process parameters
• Automatic control scheme for continuous operation andautomatic CIP (cleaning-in-place)
Operating Conditions
• Pressure up to 100 psi (7 bar)• Temperature up to 180 degF (80 degC)• Flow up to 5 gpm (1.1 m3/hr)
Optional Features
• Triple stick housing with individual permeate off-takes• Larger module to accommodate up to 1.5 M2 of membrane
area• Steam sterilization• Hazardous area electrical construction
GEA Filtration is part of GEA, an international process engineering leader in thelife sciences industry with more than 150 companies operating worldwide. As ateam member with other technology leaders within the group, GEA Filtration isuniquely positioned to provide both customized membrane filtration plants aswell as complete process lines specifically tailored to each customer’s individualneeds and requirements.
GEA Filtration is world renowned for its design of the most advanced cross-flowmembrane filtration systems available, namely Reverse Osmosis (RO),Nanofiltration (NF), Ultrafiltration (UF) and Microfiltration (MF). We also offer a wide range of system configurations and membrane types to provide thecustomer with the most technically proficient and cost effective solution for eachapplication.
For more information on the capabilities of our pilot plants, consult our websiteat www.geafiltration.com.
PY4016
PCV4016
FT4016
FIC4016
PIC4016
FEM4016
1" (5/16" TUBE)
FO
SAMPLE
FLOW CONTROL
PRESSURE CONTROL
TAMI HOUSING(3) SUNFLOWER TYPE ELEMENTS
PIC4013
VSC4013
M4013
PE4016
PT4016
2"
FEM4603
FY4603
FT4603
FCV4603
FEM4603 FO
SP
1" (5/32" TUBE)SAMPLE
LEGEND
PT4013
PE4013
HX – 4018
2" TC
TE4015
TT4015
FIC4013
FT4013
PIC4405
VSC4405
LC4402
N4405
FEEDPUMP
PT4405
PE4405
FEM4013
TIC4015
TY4015
TCV4015
FY4603
NIRO SUPPLY CUSTOMER SUPPLY
PRODUCT
PERMEATE
UTILITY / CIP
ELECTRICAL
PNEUMATIC
1 – 1/2" TC
1"
1"
2" 1 – 1/2" 1 – 1/2"
20 PSI
1" TC
1/2" FNPT
1" TC 1" TC
1 – 1/2" TC
15 GAL.TK – 4403
15 GAL.TK – 4403
SAMPLE
4"
PRESSURE CONTROL
FLOWCONTROL
RECIRC.PUMP
FC
HOT / COLDWATER
FEED
PUMP DESC.
FEED
RECIRC.
MOTOR HP
1 HP / X RPM
5 HP / 3500 RPM
IMPELLER (mm)
LOBE
125 mm
CONNECTION
1" X 1"
2" X 1 – 1/2"
MODEL#
FLII55S
FPX712
TAG#
M – 4405
M – 4013
Utility Requirements
• Floor Space 5' x 8 1/2' x 8 1/2'• Shipping Wt. 2400 lbs.• Voltage/ph 440V, 3 ph• Total HP 6• Feed Line Fitting 1 1/2" TC• CIP Fitting 1 1/2" TC• CIP Flow 5 - 10 gpm• Drain Fitting 1 1/2" TC• Tank Drain 1 1/2" TC• Product Outlets 1 1/2" TC, FLEX• Sealwater In n/a• Sealwater Out n/a• Sealwater Flow n/a• Cooling In 3/4" NPT• Cooling Out 2" TC• Cooling Flow 5 GPM• Steam In 3/4" NPT• Steam Out 2" TC• Steam Req. Up to 100 pph, 50 psi• Air Inlet 1/4" POLY• Air Req. 80-psi, 2 scfm• Caster Mounted YES
GEA Filtration • 1600 O'Keefe Road • Hudson, WI 54016 • US Telephone: + 1-715-386-9371 • T
GEA Filtration • Norskovvej 1 b • 8660 Skanderborg • DenmarkTelephone: + 45 70 15 2200 • Telefax:+ 45 70 15 2244 • Email: [email protected] Filtration • Am Hardtwald 1 • 76275 Ettlingen • GermanyTelephone: +49-7243 7050 • Telefax: + 49-7243 7053 30 • E-mail: [email protected]