Upload
phamdien
View
214
Download
0
Embed Size (px)
Citation preview
Z
Y
ADA COMPLIANT
A
A
3112"
63"
18"
34"
1"
RIGHT SEATRIGHT PLUMBING
-One piece shower module shall be constructed of gelcoat/fiberglass with full integral plywood backing-Rough-In: Stud opening +1/4" -0" Nominal Dimensions.
C.S.I. FORMAT SPECIFICATION TEXT AVAILABLE
-Colors: White as standard, others to match anymajor fixture manufacturer, also available withsprayable solid surface in many colors-Custom curb heights, other than shown, areavailable (between min. and max.)
INSTALLED AT FACTORY:-Grab bar-Seat, folding-Mixing valve, pressure balanced, lever handle,preplumbed tree to supply elbow-Vacuum breaker-Soap dish
INSTALLED BY OTHERS:-Curtain and rod-Collapsible Rubber Water Retainer-Semi-permanent Threshold Adaptor-Caulkless drain
Designed and manufactured in compliance withthe following standards and codes:
-I.P.C. International Plumbing Code
-Recess as needed to meet code-Adhere to floor as required
311 2"
60"76
34"
-Accessories: Factory installed, unless prone todamage during installation/shipping. Polishedchrome/satin stainless standard, others available. -A.N.S.I. Z124.2 Standards for Plastic Showers
-A.D.A. Accessibility Guildelines for Buildings andFacilities-A.N.S.I. A117.1 Accessible and Usable Buildingsand Facilities-U.P.C. Uniform Plumbing Code
TOP VIEW - SCALE 38" = 1'-0"
PERSPECTIVE VIEW - N.T.S.MODEL SHOWN HERE AS:
FRONT ELEVATION - SCALE: 38" = 1'-0"
MODEL:
Y Z*
* - SEE BACK FOR DETAIL SECTIONS
UNITHEIGHT
THRESHOLDHEIGHT
MODEL #
SEEOVER
Features:
We reserve the right to make revisions without noticein the design of fixtures or in packaging unless thisright has specifically been waived at the time the orderis accepted.
PRODUCT SPECIFICATIONS:
PRODUCT INFORMATION: ACCESSORIES: CODES:
NOTICE OF LIMITATION:
page 1 of 2
2" MAX.3/4" MIN.
79-3/4"78-1/2"
LES6333A2BLES6333A75B
LES6333A75B*ALL ACCESSORIES OPTIONAL
-ADA compliant roll-in shower-Available in various threshold heights-Molded, one piece gelcoat/fiberglassshower module-Eight Inch Tile wall finish, white (standard)-Integral full wood backing for strength andunlimited accessory placement-On all threshold, heights 1-1/2" or taller,no mud set is required-On all threshold, heights 1-1/4" orshorter,no mud set is required, but anepoxy adhesive kit is supplied
*OTHER THRESHOLD HEIGHTSAVAILABLE UPON REQUEST
212"
2"
12"
SEMI-PERMANENT THRESHOLD ADAPTOR (OPTIONAL)BUILD UP OR RECESS
TO MEET CODE
138"
T-SHAPED RUBBER WATER STOPPER (OPTIONAL)
212"
34"
12"
SEMI-PERMANENT THRESHOLD ADAPTOR
INTEGRAL LEVEL SUPPORT (ADHEREDBY OTHERS)
BUILD UP OR RECESSTO MEET CODE
4" 8" DIA. DRAIN CUT-OUT138"
T-SHAPED RUBBER WATER STOPPER (OPTIONAL)
12" MIN.
PLYWOOD
GELCOATFINISH
(COLOR)
FIBERGLASSSKIN
LAMINATE
FIBERGLASSLAMINATE REVEAL FLANGE
WHERE USED
STRAIGHTFLANGE
WHERE USED
SECTION A-A - SCALE: 3" = 1'-0"
SECTION A-A - SCALE: 3" = 1'-0"
**OTHER THRESHOLD HEIGHTS AVAILABLE UPON REQUEST**
DETAIL B - SCALE: 3" = 1'-0" DETAIL C - SCALE: NTSWALL SECTION DETAIL TYPICAL FRAMING
LES6333A75B
LES6333A2B
page 2 of 2