Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•
Rigid one-piece neck/body construction for long-term stability•
Impervious to climate for consistent performance, wherever you go•
22.75” scale length•
14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•
Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•
Proprietary Reinforced Polymer Fretboard with 21 medium stainless steel frets, top dots & side dots•
15 degree headstock pitch•
Optionalpremiumelectronicsforeasyandclearamplification•
Offsetsoundholewithintegratedtopbracingtechnology™(IBT™)•
Ultra-Precise tuning machines with 18:1 ratio•
Handcrafted in the USA by skilled technicians and craftsmen•
Gig bag included•
ShipswithElixr• ®Nanoweb® strings, .012-.053
Model: Composite Acoustics™ CargoAvailable Finishes: High gloss Carbon Burst, Solid Red, Solid Blue, Solid Metallic Charcoal,
SolidWhiteorinourSatinBackRAWcarbonfibertopfinish.
CustomTribalfinishavailableonRed,Blue,WhiteandCharcoalfinishes.
A
C
D
B
RADIUS
NECK DIMENSIONS & STRING HEIGHT SETUP SPECSScale/Length: 22.75”, 21 frets
a.WidthatNut:1.75”(44.45mm)
b.WidthatLastFret:2.25”(57.15mm)
c.Thicknessat1stFret:.81”(20.57mm)
d.Thicknessat12thFret:.86”(21.84mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:CarbonFiber
NeckType:“C”neckshape
HardwareColor:BlackChrome
Fingerboard: Proprietary Reinforced Polymer
Fretboard
Inlays: Side marker, aluminum dot
Frets: 21, 2.13 mm wide, .99mm tall, Stainless
Steel
Bridge:ProprietaryCarbonComposite
Pickup:L.R.BaggsActiveElement*
*Seewww.lrbaggs.comfordetailedspecificationsofon-boardelectronics
CustomTribalfinish
StringHeightSpecification
1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”
CargoBasicDimensions
FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•
Rigid one-piece neck/body construction for long-term stability•
Impervious to climate for consistent performance, wherever you go•
14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•
Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•
15 degree headstock pitch•
Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•
AvailablewiththeL.R.BaggsStageProPick-upsystemwithon-boardEQandTuner•
Center sound hole with brushed stainless sound hole ring•
Performancetunedlightweightcarbonfiberbracing•
Ultra-precise tuning machines with 18:1 ratio•
Handcrafted in the USA by skilled technicians and craftsmen•
Lite case included•
ShipswithElixr• ®Nanoweb® strings, .012-.053
Model: Composite Acoustics™ OXAvailable Finishes:
High gloss Carbonburst, Solid Red, Solid Blue, Solid Metallic, Charcoal, Solid White or
inourSatinBackRAWcarbonfibertopfinish
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 20 frets
a.WidthatNut:1.75”(44.45mm)
b.WidthatLastFret:2.125”(53.98mm)
c.Thicknessat1stFret:.81”(20.57mm)
d.Thicknessat12thFret:.86”(21.84mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:CarbonFiber
NeckType:“C”neckshape
HardwareColor:BlackChrome
Fingerboard: Proprietary Reinforced Polymer
Inlays: Side marker, aluminum dot
Frets: 2.13 mm wide, .99mm tall, Stainless Steel
Bridge:Proprietary Carbon Composite
Pickup:L.R.BaggsStageProElement*
*Seewww.lrbaggs.comfordetailedspecificationsofon-boardelectronics
StringHeightSpecification
1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”
OXBasicDimensions
1.757
2.324
14.978
40.772
2.986
11.108
1.804
.885
3.748
.600
3.583
Action at 12th FretApprox. 0.090"
Drawing NTS All Dimensions Approximate
FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•Rigid one-piece neck/body construction for long-term stability•Impervious to climate for consistent performance, wherever you go•14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•Slenderergonomicdesign,voicedtoextendlowendresponse•15 degree headstock pitch•Availablewith1.75”nutwidthornew“NarrowNeck”1.69”nutwidth•Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•AvailablewiththeFishman®PrefixPlusTorFishmanAura®pickup/preampsystems•Center sound hole with abalone sound hole ring•Performancetunedlightweightcarbonfiberbracing•Ultra-precise tuning machines with 18:1 ratio•Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•Handcrafted in the USA by skilled technicians and craftsmen•Hardshell case included•ShipswithElixr• ®Nanoweb® strings, .012-.053
Model: Composite Acoustics™ GXAvailable Finishes: High gloss Carbon Burst or Wine Red Burst
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 20 frets
a.WidthatNut:
Regular:1.75”(44.45mm)
NarrowNeck:1.69”(42.93mm)
b. Width at Last Fret:
Regular:2.25”(57.15mm)
NarrowNeck:2.125”(53.98mm)
c.Thicknessat1stFret:.81”(20.57mm)
d.Thicknessat12thFret:.86”(21.84mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:CarbonFiber
NeckType:“C”neckshape
HardwareColor:BlackChrome
Fingerboard: Proprietary Reinforced Polymer
Inlays: Side marker, aluminum dot
Frets: 2.13 mm wide, .99mm tall, Stainless Steel
Bridge:Proprietary Carbon Composite
Pickup:FishmanPrefixPlusT(standard)
Fishman®Aura®(premiumupgrade)
*Seewww.fishman.comfordetailedspecificationsofon-boardelectronics
The Fishman Aura system includes 6 images of the GX model:
1. DPA 4011 small diaphragm condenser2.NeumannM147largediaphragmcondenser3.Shure®Beta58®dynamiccardioid4.NeumannKM84smalldiaphragmcondenser5.NeumannU87largediaphragmcondenser6. Schoeps CMC64g small diaphragm condenser
TheAuraallowsforseparateEQ’ngofthepickupandimages,aswellasseparatephasecontrol.
StringHeightSpecification
1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”
GXBasicDimensions
14.14111.386
25.528
5.995
40.600
2.143 1.740
40.600
4.688
20.61219.989
16.014
NarrowNeck
11.386
5.995
40.600
2.268 1.825
25.528
14.141
40.600
4.688
20.61219.989
16.014
WideNeck
FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•
Rigid one-piece neck/body construction for long-term stability•
Impervious to climate for consistent performance, wherever you go•
14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•
Slenderergonomicdesign,voicedtoextendlowendresponse•
15 degree headstock pitch•
Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•
AvailablewiththeFishman®PrefixPlusTorFishmanAura®pickup/preampsystems•
Offsetsoundholewithintegratedtopbracingtechnology™(IBT™)forimprovedbassresponse•
Ultra-precise tuning machines with 18:1 ratio•
Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•
Handcrafted in the USA by skilled technicians and craftsmen•
Hardshell case included•
ShipswithElixr• ®Nanoweb® strings, .012-.053
Model: Composite Acoustics™ GXiAvailable Finishes: High gloss Solid Red, Solid Blue, Solid Metallic Charcoal, Wine Red Burst or Carbon Burst
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 20 frets
a.WidthatNut:
Regular:1.75”(44.45mm)
NarrowNeck:1.69”(42.93mm)
b. Width at Last Fret:
Regular:2.25”(57.15mm)
NarrowNeck:2.125”(53.98mm)
c.Thicknessat1stFret:.81”(20.57mm)
d.Thicknessat12thFret:.86”(21.84mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:CarbonFiber
NeckType:“C”neckshape
HardwareColor:BlackChrome
Fingerboard: Proprietary Reinforced Polymer
Inlays: Side marker, aluminum dot
Frets: 2.13 mm wide, .99mm tall, Stainless Steel
Bridge:Proprietary Carbon Composite
Pickup:FishmanPrefixPlusT(standard)
FishmanAura(premiumupgrade)
*Seewww.fishman.comfordetailedspecificationsofon-boardelectronics
The Fishman Aura system includes 6 images of the GX model:
1. DPA 4011 small diaphragm condenser2.NeumannM147largediaphragmcondenser3.Shure®Beta58®dynamiccardioid4.NeumannKM84smalldiaphragmcondenser5.NeumannU87largediaphragmcondenser6. Schoeps CMC64g small diaphragm condenser
TheAuraallowsforseparateEQ’ngofthepickupandimages,aswellasseparatephasecontrol.
StringHeightSpecification
1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”
GXi*BasicDimensions
14.14111.386
25.528
5.995
40.600
2.143 1.740
40.600
4.688
20.61219.989
16.014
NarrowNeck
11.386
5.995
40.600
2.268 1.825
25.528
14.141
40.600
4.688
20.61219.989
16.014
WideNeck
*GXidimensionssameasGX(shown)
FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•Rigid one-piece neck/body construction for long-term stability•Impervious to climate for consistent performance, wherever you go•14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•Slenderergonomicdesign,voicedtoextendlowendresponse•15 degree headstock pitch•Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•AvailablewiththeL.R.BaggsActiveElementpickupsystem•Center sound hole with abalone sound hole ring•Performancetunedlightweightcarbonfiberbracing•Ultra-precise tuning machines with 18:1 ratio•Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•Handcrafted in the USA by skilled technicians and craftsmen•
Hardshell case included•ShipswithElixr• ®Nanoweb® strings, .012-.053
Model: Composite Acoustics™ XAvailable Finishes: High Gloss Carbon Burst, Wine Red Burst, Solid Red and Solid Blue
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 20 frets
a.WidthatNut:1.75”(44.45mm)
b.WidthatLastFret:2.25”(57.15mm)
c.Thicknessat1stFret:.81”(20.57mm)
d.Thicknessat12thFret:.86”(21.84mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:CarbonFiber
NeckType:“C”neckshape
HardwareColor:BlackChrome
Fingerboard: Proprietary Reinforced Polymer
Inlays: Side marker, aluminum dot
Frets: 2.13 mm wide, .99mm tall, Stainless Steel
Bridge:Proprietary Carbon Composite
Pickup:L.R.BaggsActiveElement
*Seewww.lrbaggs.comfordetailedspecificationsofon-boardelectronics
StringHeightSpecification
1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”
X*BasicDimensions
2.986
14.1
4619
.996
40.5
63
1.757
2.269
25.5
39
15.2543.136
*XdimensionssameasXi(shown)
All Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•Rigid one-piece neck/body construction for long-term stability•Impervious to climate for consistent performance, wherever you go•14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•Slenderergonomicdesign,voicedtoextendlowendresponse•15 degree headstock pitch•Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•AvailablewiththeL.R.BaggsActiveElementpickupsystem•Offsetsoundholewithintegratedtopbracingtechnology™(IBT™)forimprovedbassresponse•Performancetunedlightweightcarbonfiberbracing•Ultra-precise tuning machines with 18:1 ratio•Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•Handcrafted in the USA by skilled technicians and craftsmen•
Hardshell case included•ShipswithElixr• ®Nanoweb® strings, .012-.053
FEATURES
Model: Composite Acoustics™ XiAvailable Finishes: High Gloss Carbon Burst, Wine Red Burst, Solid Red and Solid Blue
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 20 frets
a.WidthatNut:1.75”(44.45mm)
b.WidthatLastFret:2.25”(57.15mm)
c.Thicknessat1stFret:.81”(20.57mm)
d.Thicknessat12thFret:.86”(21.84mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:CarbonFiber
NeckType:“C”neckshape
HardwareColor:BlackChrome
Fingerboard: Proprietary Reinforced Polymer
Inlays: Side marker, aluminum dot
Frets: 2.13 mm wide, .99mm tall, Stainless Steel
Bridge:Proprietary Carbon Composite
Pickup:L.R.BaggsActiveElement
*Seewww.lrbaggs.comfordetailedspecificationsofon-boardelectronics
StringHeightSpecification
1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”
XiBasicDimensions
2.986
14.1
4619
.996
40.5
63
1.757
2.269
25.5
39
15.2543.136
FEATURESAll Composite Acoustically Tailored™ construction for ultimate tone, durability and versatility•Rigid one-piece neck/body construction for long-term stability•Impervious to climate for consistent performance, wherever you go•14frettothebodyCarbonfiberneckforconsistentplayability(Notrussrodadjustmentsneeded,EVER!)•Slenderergonomicdesign,voicedtoextendlowendresponse•15 degree headstock pitch•Proprietarycarbonfiberbridgeandsaddlematerialsformaximumsoundtransfer•AvailablewiththeFishman®PrefixPlusTorFishmanAura®pickup/preampsystems•Center sound hole with abalone sound hole ring•Performancetunedlightweightcarbonfiberbracing•Ultra-precise tuning machines with 18:1 ratio•Proprietary Reinforced Polymer Fretboard with 20 medium stainless steel frets, top dots & side dots•Handcrafted in the USA by skilled technicians and craftsmen•
Hardshell case included•ShipswithElixr• ®Nanoweb® strings, .012-.053
Model: Composite Acoustics™ LegacyAvailable Finishes: High Gloss Carbon Burst, Wine Red Burst, and
SatinbackRAWCarbonFibertop
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 20 frets
a.WidthatNut:1.75”(44.45mm)
b.WidthatLastFret:2.25”(57.15mm)
c.Thicknessat1stFret:.81”(20.57mm)
d.Thicknessat12thFret:.86”(21.84mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:CarbonFiber
NeckType:“C”neckshape
HardwareColor:BlackChrome
Fingerboard: Proprietary Reinforced Polymer
Inlays: Side marker, aluminum dot
Frets: 2.13 mm wide, .99mm tall, Stainless Steel
Bridge:Proprietary Carbon Composite
Pickup:FishmanPrefixPlusT(standard)
FishmanAura(premiumupgrade)
*Seewww.fishman.comfordetailedspecificationsofon-boardelectronics
The Fishman Aura system includes 6 images:
1. DPA 4011 small diaphragm condenser2.NeumannM147largediaphragmcondenser3.Shure®Beta58®dynamiccardioid4.NeumannKM84smalldiaphragmcondenser5.NeumannU87largediaphragmcondenser6. Schoeps CMC64g small diaphragm condenser
TheAuraallowsforseparateEQ’ngofthepickupandimages,aswellasseparatephasecontrol.
StringHeightSpecification
1st Fret 12th Fret E6-0.0240”E6-0.0938”3/32”A5-0.0220“A5-0.0938”3/32”D4-0.0220“D4-0.0938”3/32”G3-0.0220” G3-0.0781” 5/64”B2-0.0200”B2-0.0781”5/64”E1-0.0190”E1-0.0781”5/64”
LegacyBasicDimensions
19.973
25.510
1.75
7
11.35512.746
20.62519.973
40.598
25.510
4.50
915
.989
Model: Composer™ Parlor GuitarAvailableFinishes:Natural,Sunburst
FEATURESParlor style guitar •
Spruce Laminate top•
Rosewood bridge•
Rosewoodfingerboard•
EasternMahoganyneck•
14 degree angled headstock•
24.75” scale•
18 Frets•
Dovetailneckjoint•
NaturalorSunburstfinishes•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:24.75”(628mm)
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.20”(56mm)
c.Thicknessat1stFret:.83”(21mm)
d.Thicknessat9thFret:.90”(24mm)
Radius: 15.75”
SPECIFICATIONSNeckMaterial:EasternMahogany
Hardware Color: Chrome
Fretboard: Rosewood
Inlays: Perloid dots
Frets: 18, 2.2mm nickel
Bridge:Rosewood
Body:SapeleLaminate
Model: Composer™ MandolinAvailable Finishes: Sunburst
FEATURESExclusivePowerPlateincreasessustain•Exclusivesidewingventforextravolume•MapleNeckandBody•Laminate spruce top•Traditional neck shape•Set neck•13.77” Scale length•Rosewoodfingerboard•Flatfingerboardradius•Nutwidth:1.18”•Chrome hardware•Vintagestyleopenmachineheads•Adjustablefloatingrosewoodbridge•Chrome mandolin bridge•Dualexpandingtrussrod•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:13.77”(350mm)
a.WidthatNut:1.18”(30mm)
b.WidthatLastFret:2.75”(44.38mm)
c.Thicknessat1stFret:.85”(21.5mm)
d.Thicknessat9thFret:.97”(24.6mm)
Radius: Flat
SPECIFICATIONSNeckMaterial:Maple
Hardware Color: Chrome
Fretboard: Rosewood
Inlays: White dots
Frets: 2 mm
Bridge:Rosewood
Body:Maple
Top: Laminate Spruce
Model: Composer™ Resonator GuitarAvailable Finishes: Sunburst
FEATURESMaple body•Mahogany neck•Rosewoodfingerboard•Body,Neckbinding•Composerstyle“teardrop”soundholes•25 1/2” Scale length•1.69”Nutwidth•15.75” Radius•Aluminum resonator cone•Chrome hardware•Composerstyle“teardrop”12thfretmarkers•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:25.5”(650mm)
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.2”(56mm)
c.Thicknessat1stFret:.83”(21mm)
d.Thicknessat9thFret:.90”(23mm)
Radius: 15.75”
SPECIFICATIONSNeckMaterial:Mahogany
Hardware Color: Chrome
Fretboard: Rosewood
Inlays: White dots
Frets: 2.3 mm
Bridge:Rosewood
Body:Maple
Top: Laminate Maple
Model: Composer™ GuitaleleAvailableFinishes:Natural
FEATURESMahogany neck•Sapele body•Rosewoodfingerboard•Rosewood bridge•17” Scale length•1.89” nut width•Chrome machine heads•Dualexpandingtrussrod•Intervals tuned like a normal 6 string guitar•1st and 6th strings tuned to A•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:17”(433mm)
a.WidthatNut:1.89”(30mm)
b.WidthatLastFret:2.75”(48mm)
c.Thicknessat1stFret:.85”(21.5mm)
d.Thicknessat9thFret:.92.5”(23.5mm)
Radius: Flat
SPECIFICATIONSNeckMaterial:Mahogany
Hardware Color: Chrome
Fretboard: Rosewood
Inlays: Abalone dots
Frets: 1.65 mm
Bridge:Rosewood
Body:Sapele
Top: Sapele
Model: Composer™ UkuleleAvailableFinishes:Natural
FEATURESLaminate spruce top•
Sapele back and sides•
Mahogany neck•
Rosewoodfingerboard•
Rosewood bridge•
Chrome die cast tuning machines•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:15.66”(398mm)
a.WidthatNut:1.5”(38mm)
b.WidthatLastFret:1.75”(44.5mm)
c.Thicknessat1stFret:.63”(16mm)
d.Thicknessat9thFret:.73”(18.5mm)
Radius: Flat
SPECIFICATIONSNeckMaterial:Mahogany
Hardware Color: Chrome
Fretboard: Rosewood
Inlays: White dots
Frets: 1.8mm
Bridge:Rosewood
Body:Sapele
Top: Spruce laminate
Model: Composer™ 3/4 Scale ClassicalAvailableFinishes:Natural
FEATURESMahogany neck•
Sapele back and sides•
Laminate spruce top•
Chrome classical tuning machines•
Rosewood fretboard•
Rosewood bridge•
Naturalsatinfinish•
Dualexpandingtrussrod•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:231/4””(590mm)
a.WidthatNut:1.89”(48mm)
b.WidthatLastFret:2.37”(60.2mm)
c.Thicknessat1stFret:.846”(21.5mm)
d.Thicknessat9thFret:.90”(23mm)
Radius: Flat
SPECIFICATIONSNeckMaterial:Mahogany
Hardware Color: Chrome
Fretboard: Rosewood
Inlays:None
Frets: 19, 2mm
Bridge:Rosewood
Body:Sapele
Top: Spruce laminate
Model: DW & DW-1 AcousticAvailableFinishes:Natural
FEATURESMahogany neck•Sapele back and sides•Laminate spruce top•Die cast tuning machines•Rosewood fretboard•Undersaddle Piezo pickup•Rosewood bridge•Naturalfinish•Dualexpandingtrussrod•Passive piezo pickup•25.5” scale length•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:25.5””(647.7mm)
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.24”(56.9mm)
c.Thicknessat1stFret:.84”(21.5mm)
d.Thicknessat9thFret:.924”(23.5mm)
Radius:15.75”(400mm)
SPECIFICATIONSNeckMaterial:Mahogany
Hardware Color: Chrome
Fretboard: Rosewood
Inlays: White dots
Frets: 20
Bridge:Rosewood
Body:Sapele
Top: Spruce laminate
Model: DW-2 AcousticAvailableFinishes:Natural
FEATURESMahogany neck•
Sapele back and sides•
Laminate spruce top•
Die cast tuning machines•
Rosewood fretboard•
Rosewood bridge•
Naturalfinish•
Dualexpandingtrussrod•
Active electronics with piezo pickup•
25.5” scale length•
Gig bag included•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:25.5””(647.7mm)
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.24”(56.9mm)
c.Thicknessat1stFret:.84”(21.5mm)
d.Thicknessat9thFret:.924”(23.5mm)
Radius:15.75”(400mm)
SPECIFICATIONSNeckMaterial:Mahogany
Hardware Color: Chrome
Fretboard: Rosewood
Inlays: White dots
Frets: 20
Bridge:Rosewood
Body:Sapele
Top: Spruce laminate
Onboard electronics includes chromatic tuner.
Model: DW-3 AcousticAvailableFinishes:Natural
FEATURESMahogany neck•
Rosewood back and sides•
Solid Sitka spruce top•
Gold plated die cast tuning machines•
Rosewood fretboard•
Rosewood bridge•
Naturalfinish•
Dualexpandingtrussrod•
Premium electronics with piezo pickup & internal microphone•
25.5” scale length•
Hardshell Case included•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length:25.5””(647.7mm)
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.24”(56.9mm)
c.Thicknessat1stFret:.84”(21.5mm)
d.Thicknessat9thFret:.924”(23.5mm)
Radius:15.75”(400mm)
SPECIFICATIONSNeckMaterial:Mahogany
Hardware Color: Chrome
Fretboard: Rosewood
Inlays: White dots
Frets: 20
Bridge:Rosewood
Body:Maple
Top: Solid Sitka Spruce
Onboard electronics includes onboard micro-
phone and undersaddle Piezo with blend knob.
Preamp includes chromatic tuner.
Model: SC™-1AvailableFinishes:Black,Cherryburst,VintageTobaccoburst
FEATURES24.75” scale•22 Jumbo frets•15 degree headstock pitch•RockMapleneckwithRosewoodfingerboard•Chrome plated hardware•2 Peavey custom designed humbucking pickups•Three- a-side, diecast tuners, keystone buttons•1.69” nut width•2 volume and 2 tone controls•D style neck shape•Composite topnut•14” fretboard radius•4 bolt neck attachment with steel plate•Heavy duty tailpiece and bridge•Basswoodbody•Deeply carved top•Bodyandneckcolormatched•Dual action torsion rod•Availablefinishes:Black(BLK),Cherryburst(CHB),VintageTobaccoburst(VTB)•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 24.75”, 22 frets
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.24”(57mm)
c.Thicknessat1stFret:.846”(21.5mm)
d.Thicknessat12thFret:.896”(22.75mm)
Radius: 14”
BRIDGE PICKUPPeavey®USADesignSC™series1voicedforbridgeposition
Construction: Humbucking, dual coil
MagnetType: Ceramic 5 magnet
Description: Output frequency tailored for bridge position, 11.5k dc. Fully shielded with chrome
cover.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateunwantednoiseand
feedback.Adjustable6screwpolepiecedesign.Pickupdesignedforclearhighend,evenmidand
bassresponsewithextendedoutputforextrapunchforleadandsoloplayingwithoutharshness.
SPECIFICATIONSNeckMaterial:Maple
NeckType:SC™seriesDneckshape.Bolton
Hardware Color: Chrome
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: Top marker white Dot 6mm, side marker white dot 2mm
Frets: 2.7mm wide,1.1mm tall, nickel silver
Bridge:Tune ‘o matic, chrome die cast top mount tailpiece
NeckPickup:Humbuckerwithchromecover
BridgePickup:Humbuckerwithchromecover
NECK PICKUP
SC-1 PICKUP SWITCHING
PeaveyUSADesignSC™series1voicedforneckposition
Construction: Humbucking, dual coil
MagnetType: Ceramic 5 magnet
Description: Output frequency tailored for bridge position, 7.2k dc. Fully shielded with chrome cov-
er.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateunwantednoiseandfeed-
back.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend,evenmidandbass
response. Special winding and coil design allows for sweet high end presence even at high volumes
and clarity of pick attack when using tone control.
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
Model: SC™-2AvailableFinishes:Black,Cherryburst,VintageTobaccoburst
FEATURES
24.75” scale•22 Jumbo frets•15 degree headstock pitch•RockMapleneckwithRosewoodfingerboard•Chrome plated hardware•2- Peavey USA Design SC2 series alnico humbucking pickups•Three- a-side, diecast tuners, keystone buttons, 15-1 Ratio•1.69” nut width •2 volume and 2 tone controls•D style neck shape•14” fretboard radius•Setneckwith“extendedtail”construction•Heavy duty tailpiece and bridge•Basswoodbody•Deeply carved top•Composite topnut•Bodyandneckcolormatched•Dual action torsion rod•Availablefinishes:• Black(BLK),Cherryburst(CHB),VintageTobaccoburst(VTB)
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 24.75”, 22 frets
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.25”(57.5mm)
c.Thicknessat1stFret:.846”(21.5mm)
d.Thicknessat12thFret:.896”(22.75mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:Maple
NeckType:SCseriesDneckshape,setneck
Hardware Color: Chrome
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: Top marker white Dot 6mm, side marker white dot 2mm
Frets: 2.7mm wide,1.1mm tall, 18% nickel silver
Bridge:Tune-o-matic, chrome w/die cast top mount tailpiece
NeckPickup:Humbuckerwithchromecover
BridgePickup:Humbuckerwithchromecover
SPECIAL FEATURES
Improved upper fret access. Specially design and calibrated SC series Alnico pickups voiced for
eachposition.Sleek,comfortablebodydesignwithrearwaistcutaway.“ExtendedTailConstruction”
referstothewaytheneckisattachedtothebody.OntheSC™-2,theneckpocketisextendedallthe
way to the pickup cavity, vastly increasing the amount of contact area of the neck to the integral cen-
ter body section of the body. This has the effect of increasing the sustain of the guitar and is a feature
not seen on guitars costing many times as much as the SC-2.
NECK PICKUP
PeaveyUSADesignSCseries2voicedforneckposition
Construction: Humbucking, dual coil
MagnetType: Calibrated Alnico 2 bar magnet
Description: Output and frequency response tailored for neck position, 7.4k dc. Fully shielded with
chromecover.4conductorshieldedhookupcable,fullywaxsaturatedtoeliminateunwantednoise
andfeedback.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend,medium
output with smooth, warm low end without being muddy. The combination of a calibrated Alnico 2
barmagnetandprecisecoilwindingprocessmakestheSC-2neckperfectforJazz,Bluesandthe
vintage“womantone”madepopularinthelate60’s.Evenatthehighestvolumelevels,theSC-2
neck pickup will remain articulate, yet warm and smooth. Awesome picking dynamics and full range
ofresponsearetrademarksoftheSC-2neckpickup.Volumecontrolw’rolloffcircuitretainshighend
even at reduced volume levels.
BRIDGE PICKUPPeavey®USADesignSC™series2voicedforbridgeposition
Construction: Humbucking, dual coil
MagnetType: Alnico 5 bar magnet
Description: Output and frequency tailored for SC-2 body/neck construction, 12k dc. Fully shielded
withchromecover.4conductorshieldedhookupcable,fullywaxsaturatedtoeliminateunwanted
noiseandfeedback.Adjustable6screwpolepiecedesign.Pickupdesignedforclearhighend,
increased output and even midrange response. Calibrated Alnico 5 magnet adds warmth and in-
creased output. Frequency tailored coil winding improves high end presence for smooth sustain and
extra“bite”forsoloandleadwork.Volumecontrolwithrolloffcircuitretainshighendwithdecreased
SC™-2 PICKUP SWITCHING
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
Model: SC™-3AvailableFinishes:Black,White
FEATURES24.75” Scale•22 Jumbo frets•BlockInlays•Gold Hardware•Dualactionadjustabletorsionrod,15degreeheadstockpitch•MahoganyneckwithRosewoodfingerboard•1.69”(43mm)Compositenut•3-Peavey USA Design custom humbucking pickups•3 a side diecast tuners with 15-1 gear ratio, 24k gold plated•Keystonebuttons•2 volume and 2 tone controls positioned for easier swells•D style neck shape•14”fingerboardradiusforeaseofbendinginupperregisterandimprovedchordinginlowerregister•Heavy duty tailpiece and bridge mounting hardware for improved sustain and tone•Solid Mahogany body with integral center body section•Deeply carved top•Bodyandneckcolormatched•Composite topnut•Pull-pot controls the middle pickup on/off for many tonal options•Availablefinishes:Black(BLK),White(WHT)•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 24.75”, 22 frets
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.25”(57.5mm)
c.Thicknessat1stFret:.846”(21.5mm)
d.Thicknessat12thFret:.896”(22.75mm)
Radius: 14”
SPECIFICATIONSNeckMaterial:Mahogany
NeckType:SCseriesDneckshape,setneck
Hardware Color: 24k Gold Plated
BodyWood:3pcMahogany
Fingerboard: Rosewood
Inlays: Pearloid rectangle blocks, side markers black dot
Frets: 2.7mm wide,1.1mm tall, 18% nickel silver
Bridge:Tune-o-matic, gold plated w/die cast top mount heavy duty tailpiece
NeckPickup:HumbuckerwithGoldcover
Middle Pickup: Humbucker with Gold cover
BridgePickup:HumbuckerwithGoldcover
SPECIAL FEATURES
Improved upper fret access. Specially design and calibrated SC™ series Alnico pickups voiced for
eachposition.Sleek,comfortablebodydesignwithrearwaistcutaway.The“Extendednecktail
construction”combinedwiththeintegralcenterbodysection,allowsformaximumsoniccoupling
of neck and body . The SC-3 has a pull-pot for the on/off switch of the middle pickup. This means
many more times the tonal options than a conventional 3 pickup guitar. With the pickup off, the 3 way
pickup switch operates only the bridge and neck pickups. With the pickup on, 3 brand new tonal op-
tionsareavailable(seethepickupchartattheendofthisdocumentformoredetailedinformation).
BRIDGE PICKUPPeavey®USADesignSC™series3voicedforbridgepositionConstruction: Humbucking, dual coil MagnetType: Alnico 5 bar magnetDescription: Output and frequency response tailored for SC-3 body/neck contruction-11.5kdc. Fully shieldedwithgoldcover.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateun-wantednoiseandfeedback.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend, increased output with even mid range response. Calibrated Alnico 5 magnet adds warmth and increased output. Frequency tailored coil winding improves high end presence for smooth sustain and extra“bite”forsoloandleadwork.Volumecontrolwithrolloffcircuitretainshighendwithdecreasedvolume. The perfect bridge pickup that is hot but articulate with superb dynamics.
MIDDLE PICKUPPeaveyUSADesignSCseries3voicedforbridgepositionConstruction: Humbucking, dual coil MagnetType: Alnico 5 bar magnetDescription: Output and frequency response tailored for SC-3 middle position- -9.2k dc. Fully shieldedwithgoldcover.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateunwantednoiseandfeedback.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend, increased output with even mid range response. Calibrated Alnico 5 magnet adds warmth and increased output. Frequency tailored coil winding improves high end presence for smooth sustain andextra“bite”forsoloandleadwork.Pickupworksindependentlywithpush/pulltonecontrolCanbe used singly or in combination with bridge or neck pickup enabling multiple combinations of tone choices.
NECK PICKUPPeaveyUSADesignSCseries3voicedforneckpositionConstruction: Humbucking, dual coil MagnetType: Calibrated Alnico 2 bar magnetDescription: Output and frequency response tailored for neck position, 7.2k dc. Fully shielded with goldcover.4conductorshieldedhookupcable.Fullywaxsaturatedtoeliminateunwantednoiseandfeedback.6screwadjustablepolepiecedesign.Pickupdesignedforclearhighend,mediumoutputwith smooth, warm low end without being muddy. The combination of a calibrated Alnico 2 bar mag-netandprecisecoilwindingprocessmakestheSC-3neckperfectforJazz,Bluesandthevintage“womantone”madepopularinthelate60’s.Evenatthehighestvolumelevels,theSC-3neckpickupwill remain articulate, yet warm and smooth. Awesome picking dynamics and full range of response are trademarks of the SC-3 neck pickup.
SC™-3 PICKUP SWITCHING
MIDDLE
NECK
BRIDGE
SELECTOR POSITION (Normal Operation)
B NM B NM B NM
PULL POT TO ENABLE MIDDLE PICK-UP
Thank you for purchasing genuine peavey® producTs!
MIDDLE
NECK
BRIDGE
SELECTOR POSITION (Pot Pulled Selector Operation)
B NM B NM B NM
PULL POT TO ENABLE MIDDLE PICK-UP
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
Model: AT-200™AvailableFinishes:Black,CandyAppleRed
FEATURESAmazing automatic tuning via Antares• ® Auto-Tune™ for guitar system
25.5” scale•
Three-way switching selector for both the active Auto-Tune system and passive pickups•
Sealed diecast tuners, 15-1 gear ratio•
Master volume with momentary switch to initiate String-tune and Solid-tune™ function•
Master tone control. Pull up to turn off active system and change to passive pickups•
2 Peavey custom designed humbucking pickups•
BasswoodBody•
Dual action torsion rod•
Stringthrubodyformaximumsustain•
1/4”and8pinDINconnectors.8pinDINconnectorincludedforusewithoptionalAT200-Bbreak-•
outbox.(moredetailsonfollowingpages)
Batterypoweredvia4AAcells.CanalsoberemotelypoweredwithAT200-Bbreakoutbox•
Availablefinishes:Black(BLK),CandyAppleRed(CAR)•
Upgrade software packages available through Antares via www.autotuneforguitar.com. Please •
visit the website for a listing of available software upgrades
Black
Candy Apple Red
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 24 frets
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.25”(57.5mm)
c.Thicknessat1stFret:.807”(20.5mm)
d.Thicknessat12thFret:.886”(22.5mm)
Radius: 15.75”
SPECIFICATIONS
NeckMaterial:Maple
NeckType:Bolton,5boltdesign,shallowovalshape
HardwareColor:Black
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: 4mm white dots
Frets:24-frets2.5mmwidex1.1mmtall
Bridge:DiecastwithPiezotuners
NeckPickup: Humbucking, dual coil.
BridgePickup: Humbucking, dual coil.
IncludedAntarespickuptones*:
Neckhumbucking,bridgehumbuckingorboth.
*UpgradesoftwarepackagesavailablethroughAntaresviahttp://guitar.auto-tune.com.Pleasevisitthe website for a listing of available software upgrades.
BRIDGE PICKUP
Peavey® USA Design
Construction:Humbucking,DesignedspecificallyfortheAT-200™Bridgeposition
MagnetType:Calibratedceramicmagnet,epoxypottedcoils,solidcovers
Description: High output, harmonically positioned humbucking, dual coil pickup, 16k dc. Terminated
and wound for low noise operation. 2 conductor shielded hookup wire. Alnico 5 magnet calibrated for
bridge position. Coils frequency calibrated and metered to enhance midrange and high end response
with increased output for cutting solo work and tight low end response. High output without harsh-
ness.
NECK PICKUP
Peavey USA Design
Construction:Humbucking,DesignedspecificallyfortheAT-200Neckposition
MagnetType:Calibratedceramicmagnet,epoxypottedcoils,solidcovers
Description: Specificallydesignedforneckposition,12kdc.Terminatedandwoundforlownoise
operation. 2 conductor shielded hookup wire. Medium high output. Harmonically positioned to en-
hance harmonics, presence and attack in neck position. Metered coil winding and matched magnetic
structure allow increased dynamic range without muddiness at higher volume.
AT-200 PICKUP SWITCHING
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
PULL POT FOR COIL TAP (Middle Position)
(Pull Pot In Down Position)
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
Thank you for purchasing genuine peavey® producTs!
AT200-B Breakout Box--available separately
WiththeAT-200B*,youcangreatlyenhancetheexperienceofplayingyourAT-200guitar.NoneedforbatteriestheAT-200BremotelypowerstheAT-200,ensuringnoproblemswithdeadbatteries!Theincluded8-pinDINcablealsocarriestheguitar’soutputbackdowntothebox,wherea1/4”outputallowsyoutodirectyoursignaltoyoureffectsoramplifier.Inaddition,theMIDIjacksontheAT-200BconnecttheAT-200guitartotheworldofMIDIcontrol!SoftwareupgradepackagesavailablefromAn-tares will offer a myriad of great new features for the AT-200, all of which can be controlled via MIDI. Pleasevisithttp://guitar.auto-tune.comformoreinformationaboutsoftwareupgrades.ByregisteringyourAT-200attheAntares’Auto-TuneforGuitarwebsitehttp://guitar.auto-tune.com,youbecomeeligibletodownloadanyfuturefirmwareupdatesintoyourguitarusingtheAT-200BBreakoutBoxand a MIDI interface for your computer.
*Peaveyitemnumber03016340
Model: Predator™ Plus STAvailable Finishes:
FEATURES
25.5” scale•
Three-way switching selector•
Sealed diecast tuners, 15-1 gear ratio•
Master volume and tone controls with push/pull tone for single coil operation•
2 Peavey custom designed humbucking pickups•
Bindingonbody•
BasswoodBody•
PremiumAAAquiltedmaplecaponTransparentcolors,handstainedusingPeavey’sexclusive4•
step deep stain color process
Dual action torsion rod•
Stringthrubodyformaximumsustain•
Availablefinishes:Black(BLK),CandyAppleRed(CAR),SnowyWhite(SNW)•
andVintageBurst(VBS)
Black Candy Apple Red Vintage BurstSnowy White
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 24 frets
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.25”(57.5mm)
c.Thicknessat1stFret:.768”(19.5mm)
d.Thicknessat12thFret:.886”(22.5mm)
Radius: 15.75”
SPECIFICATIONS
NeckMaterial:NorthAmericanRockmaple
NeckType:Bolton,5boltdesign,shallowovalshape
HardwareColor:Black
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: 4mm white dots
Frets:24-frets2.7mmwidex1.1mmtall
Bridge:DiecastTunematicstyle,steelsaddles
NeckPickup:Humbucking,dualcoil,exposedbobbin.
BridgePickup:Humbucking,dualcoil,exposedbobbin.
Single coil mode on both pickups is available thru push pull.
Master tone switching allowing multiple tone combinations.
BRIDGE PICKUP
Peavey® USA Design
Construction:Humbucking,DesignedspecificallyforthePredator™Bridgeposition
MagnetType:CalibratedAlnico5magnet,exposedcoils
Description: High output, harmonically positioned humbucking, dual coil pickup, 16k dc. Terminated
and wound for low noise operation. 4 conductor shielded hookup wire. Alnico 5 magnet calibrated for
bridge position. Coils frequency calibrated and metered to enhance midrange and high end response
withincreasedoutputforcuttingsoloworkandtightlowendresponse.Pickupdesignedspecifically
for Predator body construction. High output without harshness.
NECK PICKUP
Peavey USA Design
Construction:Humbucking,DesignedspecificallyforthePredatorNeckposition
MagnetType:CalibratedAlnico5magnet,exposedcoils
Description: SpecificallydesignedforPredatorneckposition,12kdc.Terminatedandwoundfor
low noise operation. 4 conductor shielded hookup wire. Medium high output. Harmonically po-
sitioned to enhance harmonics, presence and attack in neck position. Metered coil winding and
matched magnetic structure allow increased dynamic range without muddiness at higher volume.
This pickup is perfectly matched to the Predator bridge pickup for balanced tone and response.
PREDATOR™ ST PICKUP SWITCHING
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
PULL POT FOR COIL TAP (Middle Position)
(Pull Pot In Down Position)
NECK
BRIDGE
SELECTOR POSITION
B NM
PULL POT FOR COIL TAP
B NM B NM
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
Model: Predator™ PlusAvailable Finishes:
FEATURES
25.5” scale•
Three-way switching selector•
Sealed diecast tuners, 15-1 gear ratio•
Master volume and tone controls with push/pull tone for single coil operation•
2 Peavey custom designed humbucking pickups•
Bindingonbody•
BasswoodBody•
Licensed Floyd Rose® double-locking tremolo•
Dual action torsion rod•
Availablefinishes:Black(BLK),CandyAppleRed(CAR)•
Black
Candy Apple Red
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 22 frets
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.25”(57.5mm)
c.Thicknessat1stFret:.768”(19.5mm)
d.Thicknessat12thFret:.846”(21.5mm)
Radius: 15”
SPECIFICATIONSNeckMaterial:NorthAmericanRockmaple
NeckType:Bolton,5boltdesign,shallowovalshape
HardwareColor:Black
BodyWood:Basswood,3pcw’integralcentersection
Fingerboard: Rosewood
Inlays: 4mm white dots
Frets:22-frets2.7mmwidex1.1mmtall
Bridge:Licensed Floyd Rose® double-locking tremolo
NeckPickup: Humbucking,dualcoil,exposedbobbin.
BridgePickup:Humbucking,dualcoil,exposedbobbin.
Single coil mode on both pickups is available thru push pull. Mas-
ter tone switching allowing multiple tone combinations.
BRIDGE PICKUPPeavey® USA Design
Construction:Humbucking,DesignedspecificallyforthePredator™Bridgeposition
MagnetType:Calibratedceramicmagnet,exposedcoils
Description: High output, harmonically positioned humbucking, dual coil pickup, 16k dc. Terminated
and wound for low noise operation. 4 conductor shielded hookup wire. Calibrated for bridge position.
Coils frequency calibrated and metered to enhance midrange and high end response with increased
outputforcuttingsoloworkandtightlowendresponse.PickupdesignedspecificallyforPredator
body construction. High output without harshness.
NECK PICKUP
Peavey USA Design
Construction:Humbucking,DesignedspecificallyforthePredatorNeckposition
MagnetType:Calibratedceramicmagnet,exposedcoils
Description: SpecificallydesignedforPredatorneckposition,12kdc.Terminatedandwoundfor
low noise operation. 4 conductor shielded hookup wire. Medium high output. Harmonically po-
sitioned to enhance harmonics, presence and attack in neck position. Metered coil winding and
matched magnetic structure allow increased dynamic range without muddiness at higher volume.
This pickup is perfectly matched to the Predator bridge pickup for balanced tone and response.
PREDATOR™ PICKUP SWITCHING
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
PULL POT FOR COIL TAP (Middle Position)
(Pull Pot In Down Position)
NECK
BRIDGE
SELECTOR POSITION
B NM
PULL POT FOR COIL TAP
B NM B NM
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
Model: JF™-1 GuitarAvailable Finishes:
FEATURES
24 3/4 inch scale, set-neck guitar with hard rock-maple neck•
Rosewoodfretboardandmaplemulti-laminatebodywithfiguredmaplecap•
Cream binding on body and neck•
22fretswithnewCustomBow-tieinlay•
Die-cast machine heads with tulip buttons•
Tune-o-matic bridge and stop tailpiece•
Two humbucking pickups•
Black/white/blackpickguard•
Two tone and two volume controls with three-way switch•
Gold-plated hardware•
Case available through Peavey Accessory Program•
Dual action torsion rod•
Availablefinishes:Black(BLK),TransparentRed(TRD),Sunburst(SNB)•
Black
Transparent Red
Sunburst
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 24 3/4”, 22 frets
a.WidthatNut:1.69”(43mm)
b.WidthatLastFret:2.24”(56.896mm)
c.Thicknessat1stFret:0.825”(20.955mm)
d.Thicknessat12thFret:0.865”(21.971mm)
Radius: 12”
SPECIFICATIONSNeckMaterial:Mahogany
NeckType:Set neck
Hardware Color: Gold Plated
BodyWood:LaminatedMaple
Fingerboard: Rosewood
Inlays: Acrylic pearloid bow-tie
Frets:22-frets2.7mmwidex1.1mmtall,nickelsilver
Bridge:Tune-o-maticstylebridge
NeckPickup:Ceramicloadedhumbucking
BridgePickup:Ceramicloadedhumbucking
BRIDGE PICKUP
Peavey® USA Design
Construction: Humbucking
MagnetType: Ceramic 5 magnet
Description: Dual coil, Harmonically positioned, frequency calibrated for more attack and sustain
duringsolo/leadwork.Ceramicloadedforpunchandedgeathighervolumelevelswithextended
presence.Fullypotted.12KDC.Chromeplatedcoverforaddedshieldingaswellas“vintage”ap-
pearance. 4 conductor shielded hookup cable.
NECK PICKUP
Peavey USA Design
Construction: Humbucking
MagnetType: Ceramic 5 bar
Description: Dual Coil. Harmonically positioned, frequency calibrated for neck position of the JF-
1.Vintagestylewindingallowssmoothmids,warmthandmoresustaininsoloworkinneckposition.
Ceramicloadedforaddedpresenceathighervolumelevels.Fullypotted..7.4KDC.Chromeplated
coverforaddedshieldingaswellas“vintage”appearance.4conductorshieldedhookupcable.
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
JF™-1 PICKUP SWITCHING
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
Peavey Part #00579430 JF-1 Lite CasePeaveyPart#00580070JF-1NylonBag
Model: Raptor® PlusAvailable Finishes:
FEATURES
25.5” scale, 12” radius, 22 frets•
Basswoodbodyconstruction•
Wide top pole piece single coil pickups for bigger string window with more focus•
Fulcrum tremolo bridge•
Peaveysix-in-a-lineheadstockwithergonomictunerplacement,straightstringpull•
Master volume and tone controls•
5-way pickup selector, hum canceling in second and fourth position•
15:1 ratio die cast tuners•
Dual action torsion rod•
Availablefinishes:Black(BLK),Sunburst(SNB),NortheastRed(NER)•
Cherryburst(CHB),Ivory(IVR)
Black
Sunburst
Northeast Red
Cherryburst
Ivory
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 22 frets
a.WidthatNut:1.65”(42mm)
b.WidthatLastFret:2.25”(57.5mm)
c.Thicknessat1stFret:.768”(19.5mm)
d.Thicknessat12thFret:.846”(21.5mm)
Radius: 12”
SPECIFICATIONSNeckMaterial:Maple
NeckType:Bolton
Hardware Color: Chrome
BodyWood:Solidbasswood
Fingerboard: Rosewood
Inlays: 6mm white dots
Frets:22-frets2.5mmwidex1.1mmtall
Bridge:FulcrumTremolo
NeckPickup:SingleCoil
Middle Pickup: Single Coil
BridgePickup:DualCoilHumbucker
BRIDGE PICKUP
Peavey® USA Design
Construction:Dualexposedcoil
MagnetType: Ceramic 5 magnet, wide magnetic pole pieces
Description: 11k dc. 4 conductor shielded hookup wire. High output with enhanced presence. Cali-
brated for bridge position and harmonically placed.
NECK PICKUP
Peavey USA Design
Construction: Single coil
MagnetType: Ceramic 5 bar with wide magnetic pole pieces
Description: 7.5k dc. Calibrated for neck position for enhanced clarity and attack for chording as
wellassolowork.Harmonicallyplacedforneckposition.Inductanceadjustedtoretainvintagetone.
MIDDLE PICKUP
Peavey USA Design
Construction: Single coil
MagnetType: Ceramic 5 bar with wide magnetic pole pieces
Description: 9kdc.Calibratedformidpositionforwarmthandclarity.Adjustedinductanceto
retain vintage tone with more sensitive response.
RAPTOR® PLUS PICKUP SWITCHING
NECK
BRIDGE
MIDDLE
SELECTOR POSITION
B NMBM MN B NMBM MN B NMBM MN B NMBM MN B NMBM MN
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
Model: Raptor® CustomAvailable Finishes:
FEATURES
25.5” scale, 12” radius, 22 frets•
Solid basswood body construction•
Wide top pole piece single coil pickups for bigger string window with more focus•
VintageStyleSteelFulcrumtremolobridge•
Peaveysix-in-a-lineheadstockwithergonomictunerplacement,straightstringpull•
Master volume and tone controls•
5-way pickup selector, hum canceling in second and fourth position•
15:1 ratio die cast tuners•
Dual action torsion rod•
Availablefinishes:Black(BLK),Silverburst(SLB),NortheastRed(NER),GulfcoastBlue(GCB)•
Gulfcoast Blue
Northeast Red
Silverburst
Black
Peavey’spatentpendingPowerPlateincreasessustain!
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 22 frets
a.WidthatNut:1.65”(42mm)
b.WidthatLastFret:2.25”(57.5mm)
c.Thicknessat1stFret:.768”(19.5mm)
d.Thicknessat12thFret:.846”(21.5mm)
Radius: 12”
SPECIFICATIONSNeckMaterial:Maple
NeckType:Bolton
Hardware Color: Chrome
BodyWood:Solidbasswood
Fingerboard: Rosewoodorfinished
Hard Rock Maple
Inlays: 6mm white dots
Frets:22-frets2.5mmwidex1.1mmtall
Bridge:SteelVintageStyleFulcrumTremolo
NeckPickup:SingleCoil
Middle Pickup: Single Coil
BridgePickup:SingleCoil
BRIDGE PICKUP
Peavey® USA Design
Construction: Single coil
MagnetType: Ceramic 5 magnet, wide magnetic pole pieces
Description: 9k dc. 4 conductor shielded hookup wire. High output with enhanced presence. Cali-
brated for bridge position and harmonically placed.
NECK PICKUP
Peavey USA Design
Construction: Single coil
MagnetType: Ceramic 5 bar with wide magnetic pole pieces
Description: 7.5k dc. Calibrated for neck position for enhanced clarity and attack for chording as
wellassolowork.Harmonicallyplacedforneckposition.Inductanceadjustedtoretainvintagetone.
MIDDLE PICKUP
Peavey USA Design
Construction: Single coil
MagnetType: Ceramic 5 bar with wide magnetic pole pieces
Description: 9kdc.Calibratedformidpositionforwarmthandclarity.Adjustedinductanceto
retain vintage tone with more sensitive response.
RAPTOR® Custom PICKUP SWITCHING
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
NECK
BRIDGE
MIDDLE
SELECTOR POSITION
B NMBM MN B NMBM MN B NMBM MN B NMBM MN B NMBM MN
Model: Session™AvailableFinishes:MetallicBlue,MetallicRed,Black,VintageTobaccoburst,Cherryburst
FEATURES25.5” scale with 22 nickel silver frets•
Tone chambered, resonant basswood body with integral center section •
Bolt-onCanadianrockmapleneckwithcomfortablesculptedfiveboltattachment•
GenuineRosewoodfingerboard•
Graphite composite topnut for clarity and sustain•
Two premium Peavey USA design Alnico pickups, coil tapped•
15:1 stable post designed die cast Grover machine heads•
Die cast string-through-body bridge with stainless steel saddles, nickel plated•
Recessed volume & tone controls with push/pull coil tap function•
Recessed high quality 3 way pickup selector switch•
Dual action torsion rod•
Availablefinishes:Black(BLK),MetallicBlue(MBL),MetallicRed(MRD),VintageTobaccoburst•
(VTB),Cherryburst(CHB)
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 22 frets
a.WidthatNut:1.659”(42mm)
b.WidthatLastFret:2.187”(55.55mm)
c.Thicknessat1stFret:.826”(21mm)
d.Thicknessat12thFret:.886”(22.5mm)
Radius: 9.5” graduated to 15”
SPECIFICATIONSNeckMaterial:CanadianRockMaple
NeckType:Bolton,5boltattachment
Hardware Color: Chrome
BodyWood:Solidbasswood
Fingerboard: Rosewood
Inlays: 2mm white dots
Frets:22-frets2.7mmwidex1.1mmtall
Bridge:String-through
NeckPickup:Humbucking,coiltapped
BridgePickup:Humbucking,coiltapped
BRIDGE PICKUP
Peavey® USA Design
Construction: Dual coil humbucking
MagnetType: Alnico 5 calibrated
Description: 12.5k dc. Harmonically positioned for added attack and bite for solo work. 4 conduc-
torshieldedhookupwire.Nickelplatedcoverforshieldingandvintageappearance.Dual/Singlecoil
Dual/single coil operation via push/pull pot control. Fully shielded control cavity.
NECK PICKUP
Peavey USA Design
Construction: Dual coil humbucking
MagnetType: Alnico 5 calibrated
Description: 7.5k dc. Harmonically positioned for warm yet clear low end at lower volumes and
sweet,singingmids.Alnico5calibratedmagnetdesign.Nickelplatedcoverforvintageappearance
and shielding. 4 conductor shielded hookup cable. Dual/single coil operation via push/pull pot con-
trol. Fully shielded control cavity.
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
SESSION™ PICKUP SWITCHING
Thank you for purchasing genuine peavey® producTs!
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
NECK
BRIDGE
SELECTOR POSITION
B NM
PULL POT FOR COIL TAP
B NM B NM
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
Model: Riptide™AvailableFinishes:Black,GulfcoastBlue,ClassicWhite,LauderdaleRed
FEATURES25.5” scale with 22 nickel silver frets•
Alder body •
Bolt-onCanadianrockmapleneckwithcomfortablesculptedfiveboltattachment•
GenuineRosewoodorMaplefingerboard•
Graphite composite topnut for clarity and sustain•
Two premium Peavey USA design single coil pickups•
15:1 stable post designed die cast Grover machine heads•
Compensated tele style bridge•
Volumeandtonecontrols•
High quality 3 way pickup selector switch•
Dual action torsion rod•
Availablefinishes:Black(BLK),ClassicWhite(CLW),LauderdaleRed(LDR),GulfcoastBlue(GCB)•
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 25.5”, 22 frets
a.WidthatNut:1.654”(42mm)
b.WidthatLastFret:2.2”(56mm)
c.Thicknessat1stFret:..807”(20.5mm)
d.Thicknessat12thFret:..886”(22.5mm)
Radius:13.78”(350mm)
SPECIFICATIONSNeckMaterial:CanadianRockMaple
NeckType:Bolton,5boltattachment
Hardware Color: Chrome
BodyWood:Alder
Fingerboard: Rosewood
Inlays: 2mm dots
Frets:22-frets2.7mmwidex1.1mmtall
Bridge:String-through
NeckPickup:SingleCoil
BridgePickup:SingleCoil
BRIDGE PICKUP
Peavey® USA Design
Construction: Single Coil
MagnetType: Alnico II
Description:7.8kdc.Vintagevoiced,singleconductorvintagewire.
NECK PICKUP
Peavey USA Design
Construction: Single Coil
MagnetType: Alnico II
Description:8.1kdc.Vintagevoiced,singleconductorvintagewire
RIPTIDE™ PICKUP SWITCHING
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
Peavey Part #00444840 Rectangular Guitar CasePeaveyPart#00478950MoldedElectricGuitarCase
PeaveyPart#00722780NylonGuitarBag
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
Model: Power Slide™Available Finishes:
FEATURESRevolutionarynextgenerationslideinstrument,ergonomicallydesignedformaximumplayability•
Patent pending multi-point strap system allows for multiple vertical and horizontal playing styles•
Unique magnet loaded pickup with patented variable coil mode control•
Radical patent pending design provides unprecedented neck access in vertical playing position•
Nutwidth2.2”(54mm)•
.013 - .053 nickel wound strings•
Speciallydesigned“Y”strapincluded•
Steel slide included•
Specially designed padded bag included•
Availablefinishes:Black(BLK),Burgundy(BGD),Ivory(IVR)•
Black
Burgundy
Ivory
SPECIFICATIONSNeckMaterial:Basswood
NeckType:NeckThroughconstruction
Hardware Color: Chrome
BodyWood:Basswood
Fingerboard:25”scalelength,2Octavefinger-
board graphic, Nutwidth2.2”(54mm)
Frets: 27, printed graphic
Bridge:Magnetloaded,variablecoilmode
PICKUP
Peavey® USA Design
Construction: Hi output Tappable Humbucking, dual coil
MagnetType: Ceramic 5 bar
Description:DualCoil,extendedmagneticwindow,14DCoutput.Peavey’sversatilerotarytone/
coil cut tone pot with treble bleed circuit allows clarity in both single coil and humbucking modes.
Fullyshielded4conductorcableandchromeplated“exposedcoil”coveraffordsquietoperationand
allowsmaximumadjustability.
Thank you for purchasing genuine peavey® producTs!
Model: Devin Townsend Signature PXD Vicious 7 String Baritone
FEATURES
24 jumbo frets•28” scale•14 degree headstock pitch•Rock Maple Neck Through Body construction•Mahogany body wings w/ maple cap•Ebony fretboard•Striking2tonegunmetalgray/blackfinish•Phosphorescent side markers•EMG 81-7 Bridge Pickup•EMG SA-7 Single Coil Neck Pickup•Single Volume Control with pearl inlay•3 way pickup selector toggle•Special Devin Townsend 12th fret logo•Custom designed locking machine heads•Heavydutyfixedbridge-stringthroughbody•Black TUSQ® topnut•Graphite reinforced neck•Dual action torsion rod•Hardshell Case included•
A
C
D
B
RADIUS
NECK DIMENSIONS
Scale/Length: 28”, 24 frets
a. Width at Nut: 48mm (1.89”)
b. Width at Last Fret: 60.96mm (2.4”)
c. Thickness at 1st Fret: 20.75mm (.817”)
d. Thickness at 12th Fret: 23.469mm (.924”)
Radius: 14”
SPECIFICATIONS
Neck Material: Hard Rock Maple
Neck Type: Neck Through Body
Hardware Color: Black
Body Wings: Mahogany
Fingerboard: Ebony
Inlays: 12th fret Devin Townsend signature logo
Frets: 18% nickel/silver alloy, 2.7mm wide, 1.39mm tall
Bridge: Heavy duty fixed, string through body
Neck Pickup: EMG SA-7 Single Coil active 7
Bridge Pickup: EMG 81-7 Active
*For full specs and information about the EMG pickups refer to www.emginc.com
PICKUP SWITCHING
Thank you for purchasing genuine peavey producTs!
NECK
BRIDGE
SELECTOR POSITION
B NM B NM B NM
Model:RudySarzoSignatureCirrus®Bass
FEATURES35” scale•Maplebodywingswithflamemapletop•Maple neck with walnut stringers•Snakeeyefingerboardinlays•PauFerrofingerboard•24 Frets•2wayfullyadjustabletorsionrod•String-thru body or top load •String-thru ferrules•19:1 ratio tuning machines•2Peavey®USAdesignVFLactivehumbuckingpickups•Active preamp•18 volt electronics•Volume,pickupblend,bass,midandtreblecontrolswith10dBboost/cut•Satin gold hardware•Milled one piece bridge•Gig bag included•
Peavey’spatentpendingPowerPlateincreasessustainandeliminatesdeadspots!
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 35”, 24 frets
a.WidthatNut:1.50”(38.1m)
b.WidthatLastFret:2.50”(63.5mm)
c.Thicknessat1stFret:.825”(20.96mm)
d.Thicknessat12thFret:.900”(22.86mm)
Radius: 12”
SPECIFICATIONSNeckMaterial:MaplewithwalnutStringers
NeckType:Neck-throughthebodydesign
Hardware Color: Satin gold
BodyWood:Maple
Fingerboard: Rosewood
Inlays:AbalonePearlSnakeEye
Frets: 24-frets2.7mmwidex1.1mmtall,18%nickelsilver
Bridge:Milled one piece bridge
NeckPickup:VFLInternallyactive
BridgePickup:VFLInternallyactive
BRIDGE PICKUPPeavey® USA Design VFL Humbucking
Construction:Internallyactive,lowimpedance,extendedfrequencyresponse
MagnetType:Ceramic,extendedmagneticwindow
Description: Internally active, 18 volt powered, frequency balanced for bridge position. Low im-
pedancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesign
enhances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string
vibrationandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.
NECK PICKUP
Peavey USA Design VFL Humbucking
Construction:Internallyactive,lowimpedance,extendedfrequencyresponse
MagnetType:Ceramic,extendedmagneticwindow
Description: Internally active, 18 volt powered, frequency balanced for neck position. Low imped-
ancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesignen-
hances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string vibra-
tionandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.
SPECIAL FEATURES
MadetoRudySarzo’sexactspecifications.BodywingsmademapleandcappedwithAAAquiltma-
ple.3bandactiveEQallowsforinfinitetonalcombinationssuitedforallstylesofmusic.VFLinter-
nallyactivepickupsrespondtothedynamicsoftheplayerfromJazztoHeavyMetal,fromfingerstyle
playingtothehardestpickstyles.18voltpoweredelectronicsoffercleanestoperationandextended
battery life for trouble free operation.
HARDWARE
Satin Gold
Tuners: 19-1 ratio die cast, enclosed machine heads, 4 in line.
Bridge: Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.
Controls: Volume,pickupblend,bass,midandtreblecontrolswith10dBboost/cut.Knobsarema-
chined brass, black chrome plated with elastomer grip rings.
Thank you for purchasing genuine peavey® producTs!
Model:Millennium®4Bass
Available Finishes:
FEATURES34” scale•4-string•Hard rock maple neck with rosewood fretboard•CompositeNut•2wayfullyadjustabletorsionrod•Basswoodbodywithhighlyfiguredquiltmapletopontransmodels•String through body or top load feature•19:1 ratio tuning machines•Two straight single coil pickups, hum canceling when used together•Ergonomicbodydesignwithwaistcutawayforsuperiorbalanceandcomfort•2Volume,1mastertonecontrols•Availablefinishes:Black(BLK),Sunburst(SNB),TigerEye(TGE),TransparentBlue(TBL)•
Black Sunburst Tiger Eye Transparent Blue
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 34”, 21 frets
a.WidthatNut:1.5”(38.1mm)
b.WidthatLastFret:2.5”(63.5mm)
c.Thicknessat1stFret:.825”(20.96mm)
d.Thicknessat12thFret:.903”(22.94mm)
Radius: 12”
SPECIFICATIONSNeckMaterial:HardRockmaple
NeckType:Bolton,5boltdesign,extendedaccessheel
HardwareColor:Black
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: Acrylic Dots
Frets: 21-frets2.7mmwidex1.1mmtall,nickelsilver
Bridge:Die cast, string through body or rear load option
NeckPickup:Ceramicloadedsinglecoil
BridgePickup:Ceramicloadedsinglecoil
BRIDGE PICKUPPeavey® USA Design
Construction: Single coil, steel polepiece, 9k dc.
MagnetType: Ceramic 5 bar.
Description: Medium output, frequency tailored for bridge position. Individual polepiece for each
stringtomaximizeoutput,harmonicallypositionedwith4screwheightadjustment.Fullyshielded
hookup wire.
NECK PICKUP
Peavey USA Design
Construction: Single coil, steel polepiece, 8k dc.
MagnetType: Ceramic 5 bar.
Description: Medium output, frequency tailored for neck position. Harmonically positioned to en-
hance low end and retain presence and clarity. Fully shielded hookup wire.
HARDWARE
Blackchromeplated
Tuners: 19-1 ratio die cast, enclosed machine heads, 4 in line.
Bridge:Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.
Controls: 2 volume, 1 master tone, Die cast knobs.
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase
PeaveyPart#00722790NylonBassBag
Model:Millennium®4ACBass
Available Finishes:
FEATURES34” scale•Five bolt neck attachment with hard rock maple neck•Basswoodbody,rosewoodfingerboard,highlyfiguredquiltedmaplecapontransmodels•21 Frets•19-1 mini die cast enclosed machine heads•2wayfullyadjustabletorsionrod•Individualfinger-stylebridge•String-thru body or top load •String-thru ferrules•19:1 ratio tuning machines•2Peavey®USAdesignVFLactivehumbuckingpickups•Active preamp•18 volt electronics•Volume,pickupblend,bass,midandtreblecontrolswith12dBboost/cut•Satin black hardware•Availablefinishes:Black(BLK),TigerEye(TGE)•
Black Tiger Eye
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 34”, 21 frets
a.WidthatNut:1.50”(38.1m)
b.WidthatLastFret:2.50”(63.5mm)
c.Thicknessat1stFret:.825”(20.96mm)
d.Thicknessat12thFret:.900”(22.86mm)
Radius: 12”
SPECIFICATIONSNeckMaterial:HardRockmaple
NeckType:Bolton,5boltdesign,extendedaccessheel
HardwareColor:Black
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: Acrylic Dots
Frets: 21-frets2.7mmwidex1.1mmtall,18%nickelsilver
Bridge:Diecast,individualfingerstyle.3way
adjustable,string-thrubodyortopload
NeckPickup:VFLInternallyactive
BridgePickup:VFLInternallyactive
BRIDGE PICKUPPeavey® USA Design VFL Humbucking
Construction:Internallyactive,lowimpedance,extendedfrequencyresponse
MagnetType:Ceramic,extendedmagneticwindow
Description: Internally active, 18 volt powered, frequency balanced for bridge position. Low im-
pedancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesign
enhances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string
vibrationandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.
NECK PICKUP
Peavey USA Design VFL Humbucking
Construction:Internallyactive,lowimpedance,extendedfrequencyresponse
MagnetType:Ceramic,extendedmagneticwindow
Description: Internally active, 18 volt powered, frequency balanced for neck position. Low imped-
ancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesignen-
hances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string vibra-
tionandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.
SPECIAL FEATURES
Ergonomicbodydesignwithwaistcutawayforimprovedbalanceandcomfort.3bandactiveEQ
allowsforinfinitetonalcombinationssuitedforallstylesofmusic.VFLinternallyactivepickupsre-
spondtothedynamicsoftheplayerfromJazztoHeavyMetal,fromfingerstyleplayingtothehardest
pickstyles.18voltpoweredelectronicsoffercleanestoperationandextendedbatterylifefortrouble
free operation.
HARDWARE
Blackchromeplated
Tuners: 19-1 ratio die cast, enclosed machine heads, 4 in line.
Bridge: Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.
Controls: MasterVolume,bass,mid,treble&pickupblendcontrols.Knobsaremachinedbrass,black
chrome plated with elastomer grip rings.
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase
PeaveyPart#00722790NylonBassBag
Model:Millennium®5Bass
Available Finishes:
FEATURES34” scale•5-string•15” fretboard radius•Hard rock maple neck with rosewood fretboard•CompositeNut•2wayfullyadjustabletorsionrod•Basswoodbodywithhighlyfiguredquiltmapletopontransmodels•String through body or top load feature•19:1 ratio tuning machines•Two straight single coil pickups, hum canceling when used together•Ergonomicbodydesignwithwaistcutawayforsuperiorbalanceandcomfort•Availablefinishes:Black(BLK),Sunburst(SNB),TigerEye(TGE),TransparentBlue(TBL)•
Black Sunburst Tiger Eye Transparent Blue
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 34”, 21 frets
a.WidthatNut:1.76”(44.7mm)
b.WidthatLastFret:2.675”(67.95mm)
c.Thicknessat1stFret:.805”(20.46mm)
d.Thicknessat12thFret:.905”(23mm)
Radius: 15.75”
SPECIFICATIONS
NeckMaterial:HardRockmaple
NeckType:Bolton,5boltdesign,extendedaccessheel
HardwareColor:Black
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: Acrylic Dots
Frets: 21-frets2.7mmwidex1.1mmtall,nickelsilver
Bridge:Die cast, string through body or rear load option
NeckPickup:Ceramicloadedsinglecoil
BridgePickup:Ceramicloadedsinglecoil
BRIDGE PICKUPPeavey® USA Design
Construction: Single coil, steel polepiece, 9k dc.
MagnetType: Ceramic 5 bar.
Description: Medium output, frequency tailored for bridge position. Individual polepiece for each
stringtomaximizeoutput,harmonicallypositionedwith4screwheightadjustment.Fullyshielded
hookup wire.
NECK PICKUP
Peavey USA Design
Construction: Single coil, steel polepiece, 8k dc.
MagnetType: Ceramic 5 bar.
Description: Medium output, frequency tailored for neck position. Harmonically positioned to en-
hance low end and retain presence and clarity. Fully shielded hookup wire.
HARDWARE
Blackchromeplated.
Tuners: 19-1 ratio die cast, enclosed machine heads, 3+2 arrangement.
Bridge:Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.
Controls: 2 volume, 1 master tone, Die cast knobs.
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase
PeaveyPart#00722790NylonBassBag
Model:Millennium®5ACBass
Available Finishes:
FEATURES34” scale•Five bolt neck attachment with hard rock maple neck•Basswoodbody,rosewoodfingerboard,highlyfiguredquiltedmaplecapontransmodels•21 Frets•15” fretboard radius•19-1 mini die cast enclosed machine heads•2wayfullyadjustabletorsionrod•Individualfinger-stylebridge•String-thru body or top load •String-thru ferrules•19:1 ratio tuning machines•2Peavey®USAdesignVFLactivehumbuckingpickups•Active preamp•18 volt electronics•Volume,pickupblend,bass,midandtreblecontrolswith12dBboost/cut•Satin black hardware•Availablefinishes:• Black(BLK),TigerEye(TGE)
Black Tiger Eye
A
C
D
B
RADIUS
SPECIFICATIONSNeckMaterial:HardRockmaple
NeckType:Bolton,5boltdesign,extendedaccessheel
HardwareColor:Black
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: Acrylic Dots
Frets: 21-frets2.7mmwidex1.1mmtall,18%nickelsilver
Bridge:Diecast,individualfingerstyle.3way
adjustable,string-thrubodyortopload
NeckPickup:VFLInternallyactive
BridgePickup:VFLInternallyactive
NECK DIMENSIONSScale/Length: 34”, 21 frets
a.WidthatNut:1.76”(44.7mm)
b.WidthatLastFret:2.675”(67.95mm)
c.Thicknessat1stFret:.805”(20.46mm)
d.Thicknessat12thFret:.905”(23mm)
Radius: 15.75”
BRIDGE PICKUPPeavey® USA Design VFL Humbucking
Construction:Internallyactive,lowimpedance,extendedfrequencyresponse
MagnetType:Ceramic,extendedmagneticwindow
Description: Internally active, 18 volt powered, frequency balanced for bridge position. Low im-
pedancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesign
enhances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string
vibrationandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.
NECK PICKUP
Peavey USA Design VFL Humbucking
Construction:Internallyactive,lowimpedance,extendedfrequencyresponse
MagnetType:Ceramic,extendedmagneticwindow
Description: Internally active, 18 volt powered, frequency balanced for neck position. Low imped-
ancedesignallowsfornoisefreeoperation,clarityandimproveddynamics.UniqueVFLdesignen-
hances dynamics and sensitivity for all playing styles. Wide magnetic window allows full string vibra-
tionandreducedmagneticdamping.Adjustableheightandangle.Output1v-4.5v.
SPECIAL FEATURES
Ergonomicbodydesignwithwaistcutawayforimprovedbalanceandcomfort.3bandactiveEQ
allowsforinfinitetonalcombinationssuitedforallstylesofmusic.VFLinternallyactivepickupsre-
spondtothedynamicsoftheplayerfromJazztoHeavyMetal,fromfingerstyleplayingtothehardest
pickstyles.18voltpoweredelectronicsoffercleanestoperationandextendedbatterylifefortrouble
free operation.
HARDWARE
Blackchromeplated
Tuners: 19-1 ratio die cast, enclosed machine heads, 3+2 arrangement.
Bridge:Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.
Controls: MasterVolume,bass,mid,treble&pickupblendcontrols.Knobsaremachinedbrass,black
chrome plated with elastomer grip rings.
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase
PeaveyPart#00722790NylonBassBag
Model: Grind™ 4 string bassAvailable Finishes:
FEATURES35 inch scale•4-string•24 frets•Passive humbucking pickups•Mahogany neck with maple stringers•19:1 ratio tuning machines•Mahogany body wings•Dual action torsion rod•Neck-through-bodydesign•Availablefinishes:Black(BLK),Natural(NAT)•
Natural
Gloss Black
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 35”, 24 frets
a.WidthatNut:1.57”(40mm)
b.WidthatLastFret:2.36”(60mm)
c.Thicknessat1stFret:.807”(20.5mm)
d.Thicknessat12thFret:.903”(22.94mm)
Radius: 12”
SPECIFICATIONSNeckMaterial:Mahogany with Maple Stringers
NeckType:Neckthroughthebody
HardwareColor:Black
BodyWood:Mahogany wings
Fingerboard: Rosewood
Inlays: Acrylic Dots
Frets:24NickelSilver,1.3mmtall
Bridge:Die cast, string through body or rear load option
NeckPickup:Ceramic loaded passive humbucking
BridgePickup:Ceramic loaded passive humbucking
BRIDGE PICKUPPeavey® USA Design
Construction: Humbucking
MagnetType: Ceramic 5 bar.
Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for enhanced high
end and attack. 15.5k DC.
NECK PICKUP
Peavey USA Design
Construction: Humbucking
MagnetType: Ceramic 5 bar
Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for neck. 13.5k DC
HARDWARE
Blackchromeplated
Tuners: 19-1 ratio die cast, enclosed machine heads, 2+2 arrangement.
Bridge:Heavydutydiecast,3wayadjustablesaddles,stringthroughbody.
Controls: 2 volume, 2 tone, Die cast knobs.
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase
PeaveyPart#00722790NylonBassBag
Model:Grind™Bass5String Available Finishes:
FEATURES35 inch scale•
5-string•
24 frets•
Passive humbucking pickups•
19:1 ratio tuning machines•
Mahogany• neck with maple stringers
Mahogany• body wings
Dual action torsion rod•
Neck-through-bodydesign•
Availablefinishes:• Black(BLK),Natural(NAT)
Natural
Gloss Black
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 35”, 24 frets
a.WidthatNut:1.76”(44.7mm)
b.WidthatLastFret:2.76”(70mm)
c.Thicknessat1stFret:.805”(20.46mm)
d.Thicknessat12thFret:.905”(23mm)
Radius: 15”
SPECIFICATIONSNeckMaterial:Mahogany with Maple stringers
NeckType:Neckthroughthebody
HardwareColor:Black
BodyWood:Mahogany wings
Fingerboard: Rosewood
Inlays: Acrylic Dots
Frets: 24-frets 1.3mm tall, nickel silver
Bridge:Die cast, string through body or rear load option
NeckPickup:Ceramicloadedpassivehumbucking
BridgePickup:Ceramicloadedpassivehumbucking
BRIDGE PICKUP
Peavey® USA Design
Construction: Humbucking
MagnetType: Ceramic 5 bar
Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for bridge position,
extendedmagneticwindowforlowBstringresponseandattack,16kDC.
NECK PICKUP
Peavey USA Design
Construction: Humbucking
MagnetType: Ceramic 5 bar
Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for neck position,
extendedmagneticwindowforlowBstringresponse,13.5kDC.
HARDWARE
Blackchromeplated
Tuners: 19-1 ratio die cast, enclosed machine heads, 3+2 arrangement.
Bridge:Heavydutydiecast,3wayadjustablesaddles,stringthroughbody.
Controls: 2 volume, 2 tone, Die cast knobs.
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase
PeaveyPart#00722790NylonBassBag
Model: Grind™ 6 string bassAvailable Finishes:
FEATURES35 inch scale•
24 frets•
6-string•
19:1 ratio tuning machines•
Passive humbucking pickups•
Mahogany• neck with maple stringers
Mahogany• body wings
Dual action torsion rod•
Neck-through-bodydesign•
Availablefinishes:• Black(BLK),Natural(NAT)
Natural
Gloss Black
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 35”, 24 frets
a.WidthatNut:2.13”(54mm)
b.WidthatLastFret:3.27”(83mm)
c.Thicknessat1stFret:.83”(21mm)
d.Thicknessat12thFret:.91”(23mm)
Radius: 19”
SPECIFICATIONSNeckMaterial:Mahogany with Maple stingers
NeckType:Neckthroughthebodydesign
HardwareColor:Black
BodyWood:Mahogany wings
Fingerboard: Rosewood
Inlays: Acrylic Dots
Frets: 24-frets, 1.3 mm tall, nickel silver
Bridge:Die cast, string through body or rear load option
NeckPickup:Ceramic loaded passive humbucking
BridgePickup:Ceramic loaded passive humbucking
BRIDGE PICKUPPeavey® USA Design
Construction: Humbucking
MagnetType: Ceramic 5 bar
Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for bridge position,
extendedmagneticwindowforimprovedBandCstringresponse,17kDC.
NECK PICKUP
Peavey USA Design
Construction: Humbucking
MagnetType: Ceramic 5 bar
Description: Humbucking, dual coil, fully encapsulated, harmonically positioned for neck position,
extendedmagneticwindowforimprovedBandCstringresponse,16kDC.
HARDWARE
Blackchromeplated
Tuners: 19-1 ratio die cast, enclosed machine heads, 3+3 arrangement
Bridge:Heavydutydiecast,3wayadjustablesaddles,Stringthroughbody.
Controls: 2 volume, 2 tone, Die cast knobs.
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase
PeaveyPart#00722790NylonBassBag
Model:Milestone®BassAvailable Finishes:
FEATURES34 inch scale•Maple neck with rosewood fretboard•Dual-expandingtrussrod•20 frets•12 inch radius•Balanced,comfortablebodystylingwithsculptedfrontandback,improvedaccessneckjoint•One split and one straight single coil pickups•ExclusivePowerPlateincreasessustainandeliminatesdeadspots•Stamped steel bridge•Chrome hardware•19:1 ratio tuning machines•Two volume, master tone control•Case not included•Availablefinishes:Black(BLK),GulfcoastBlue(GCB),Ivory(IVR),VintageBurst(VTB)•
Black
Vintageburst
Gulfcoast Blue
Ivory
Peavey’spatentpendingPowerPlateincreasessustainandeliminatesdeadspots!
A
C
D
B
RADIUS
NECK DIMENSIONSScale/Length: 34”, 20 frets
a.WidthatNut:1.5”(38.1mm)
b.WidthatLastFret:2.5”(63.5mm)
c.Thicknessat1stFret:.825”(20.96mm)
d.Thicknessat12thFret:.903”(22.94mm)
Radius: 12”
SPECIFICATIONSNeckMaterial:Maple
NeckType:Bolton
Hardware Color: Chrome
BodyWood:Basswood
Fingerboard: Rosewood
Inlays: Acrylic Dots
Frets:20-frets2.7mmwidex1.1mmtall,nickelsilver
Bridge:StampedSteel
NeckPickup:Ceramicloadedsinglecoil
BridgePickup:Ceramicloadedsinglecoil
BRIDGE PICKUPPeavey® USA Design
Construction: Single coil, steel polepiece, 9k dc.
MagnetType: Ceramic 5 bar.
Description: Medium output, frequency tailored for bridge position. Individual polepiece for each
stringtomaximizeoutput,harmonicallypositionedwith4screwheightadjustment.Fullyshielded
hookup wire.
NECK PICKUPPeavey USA Design
Construction: Split single coil, steel polepiece, 8k dc.
MagnetType: Ceramic 5 bar.
Description: Medium output, frequency tailored for neck position. Harmonically positioned to en-
hance low end and retain presence and clarity. Fully shielded hookup wire.
HARDWARE
Chromeplated
Tuners: 19-1 ratio die cast, enclosed machine heads, 4 in line.
Bridge:Heavydutydiecast,3wayadjustablesaddles,rearortoploadoption.
Controls: 2 volume, 1 master tone, Die cast knobs.
Thank you for purchasing genuine peavey® producTs!
AVAILABLE CASES/BAGS
PeaveyPart#00487480RectangularBassCasePeaveyPart#00478970MoldedHardshellBassCase
PeaveyPart#00722790NylonBassBag