Upload
doanthien
View
218
Download
1
Embed Size (px)
Citation preview
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Florestone Model 36-34H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Mod
el
36-3
4H
Furnish and install one-piece gel-coated fiberglass shower stall Model 36-34H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; two stainless steel grab bars; stainless steel recessed soap dish; white naugahyde folding seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 45" x 75".
Standard Color: White.
Special order colors available.
36" x 36" x 79" Weight: 215 lbs.
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Two stainless steel grab bars
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left hand)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
36"
33"to 36"aboveinside�oor
18"aboveinside�oor
18"
36"
34" 1"
17¼"
2½"
2"
78"
79"
Mod
el 3
PC
-36-3
4H
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Furnish and install one-piece gel-coated fiberglass shower stall Model 3PC-36-34H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; two stainless steel grab bars; stainless steel recessed soap dish; white naugahyde folding seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 45" x 75".
Standard Color: White.
Special order colors available.
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Two stainless steel grab bars
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left hand)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
Florestone Model 3PC-36-34H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
36" x 36" x 80" Weight: 215 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
36"
33"to 36"aboveinside�oor
18"aboveinside�oor
18"
36"
34" 1"
17¼"
2½"
21½"
2"
78"
80"
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Florestone Model 44-52HBarrier-Free Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
44-5
2H
Furnish and install one-piece gel-coated fiberglass shower stall Model 44-52H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheel- chair transfer seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 54" x 78".
Standard Color: White.
Special order colors available.
44" x 52" x 84" Weight: 285 lbs.
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Two stainless steel grab bars
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left band)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
44¼"
33"to 36"aboveinside�oor
18"aboveinside�oor
22"
50"
1½"7"
1"
52"
2½"
1⅜"
83"84"
3P
C-4
4-5
2H
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Furnish and install one-piece gel-coated fiberglass shower stall Model 3PC44-52H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheel- chair transfer seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 54" x 78".
Standard Color: White.
Special order colors available.
Florestone Model 3PC44-52H Barrier-Free Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
40¼" x 52 x 84" Weight: 295 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
44¼"
33"to 36"aboveinside�oor
18"aboveinside�oor
22"
50"
1½"7"
1"
52"
2½"
1⅜"
83"84"
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Two stainless steel grab bars
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left hand)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Furnish and install one-piece gel-coated fiberglass shower stall Model 48-52H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 54" x 78".
Standard Color: White.
Special order colors available.
Florestone Model 48-52HInstitutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Mod
el
48-5
2H
18" above inside �oor
33" to 36" above inside �oor
2"
84"85"
51"
24¼"
2½"
48½"
6"
52"
48½" x 52" x 85" Weight: 380 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Two stainless steel grab bars
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left hand)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
Mod
el 3
PC
-48-5
2H
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
ADA compliance when accessories installed by manufacturer.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-48-52H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 54" x 78".
Standard Color: White.
Special order colors available.
Florestone Model 3PC-48-52HInstitutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
481/2" x 52" x 87" Weight: 390 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Two stainless steel grab bars
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left hand)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
18" above inside �oor
33" to 36" above inside �oor
2"
84"85"
51"
24¼"
2½"
48½"
6"
52"
21½"
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Florestone Model 30-60H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Mod
el
30-6
0H
Furnish and install one-piece gel-coated fiberglass shower stall Model 30-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 72" x 78".
Standard Color: White.
Special order colors available.
60" x 31" x 81½" Weight: 235 lbs.
33"to
36"
2"
80"
30"
30"60"
14½"31"
81½"
ControlArea
*Above inside �oor
1" Nailing Flange
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Stainless steel wrap-around grab bar
• Stainless steel recessed soap dish
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Mod
el 3
PC
-30-6
0H
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-30-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 72" x 78".
Standard Color: White.
Special order colors available.
Florestone Model 3PC-30-60H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
60" x 31" x 81½" Weight: 245 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Stainless steel wrap-around grab bar
• Stainless steel recessed soap dish
33"to
36"
2"
80"
30"
30"60"
14½" 31"
80½"
ControlArea
*Above inside �oor
1" Nailing Flange
21"
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Florestone Model 32-60H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Mod
el
32-6
0H
Furnish and install one-piece gel-coated fiberglass shower stall Model 32-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 72" x 78".
Standard Color: White.
Special order colors available.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
60" x 31" x 81½" Weight: 260 lbs.
30"
30"
1" Flange
60"
14½" 31"
33" to36"
80"
2"
18"*
81½"
ControlArea
*Above inside �oor
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Two stainless steel grab bars
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left hand)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
Mod
el 3
PC
-32-6
0H
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.For barrier-free installation, contractor shall provide recess for curb in sub floor.Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-32-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat. When ordering please specify right or left hand seat and drain location: center, right-hand drain or left-hand drain.
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 72" x 72".
Standard Color: White.
Special order colors available.
Florestone Model 3PC-32-60HInstitutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
60" x 31" x 81½"Weight: 270 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Stainless steel corner grab bar
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left hand)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
SPECIFY:Center, Left hand
or Right hand drainAND
Left hand or Right hand Seat
30"
30"60"
14½"31"
30"
8"
⅞" �reshold
60"
14½"31"
33"to
36"*
80"
18"*
81½"
ControlArea
*Above inside �oor
21"*
Optional: Right Hand or Left Hand Drain (Please Specify)
⅞" �reshold
⅞" �reshold
Now available RH or LH drain for bathtub retro-fit.
Now available RH or LH drain for bathtub retro-fit.
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Florestone Model 36-60H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Mod
el
36-6
0H
Furnish and install one-piece gel-coated fiberglass shower stall Model 36-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.
Shower curtain optional.
Curtain Size: 72" x 72".
Standard Color: White.
Special order colors available.
60" x 36" x 78" Weight: 260 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Stainless steel wrap-around grab bar
• Stainless steel recessed soap dish
33" to36"
2"
80"
35"
30"60"
14½" 36"
81½"
ControlArea
*Above inside �oor
1" Nailing Flange
Mod
el 3
PC
-36-6
0H
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-36-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel wrap-around grab bar; stainless steel recessed soap dish.
Shower curtain optional.
Curtain Size: 72" x 72".
Standard Color: White.
Special order colors available.
Florestone Model 3PC-36-60H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
60" x 36" x 78" Weight: 270 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Stainless steel wrap-around grab bar
• Stainless steel recessed soap dish
33"to
36"
2"
77"
35"
31"60"
18" 36"
78"
ControlArea
*Above inside �oor
1" Nailing Flange
21"
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Florestone Model 38-60H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Mod
el
38-6
0H
Furnish and install one-piece gel-coated fiberglass shower stall Model 38-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 72" x 72".
Standard Color: White.
Special order colors available.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
60" x 36" x 78" Weight: 285 lbs.
ControlArea
35"
30"
1" Flange
60"
18" 36"
33to
36"
77"
2"
18"*
78"
*Above inside �oor
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Stainless steel wrap-around grab bar
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left hand)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
Mod
el 3
PC
-38-6
0H
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation, contractor shall provide recess for curb in sub floor.
Note: Exterior floor drain for water run-off recommended.Symmons® is a Registered Trade Mark of Symmons Industries, Inc.Moen® is a Registered Trade Mark of Moen Corporation.
Architect’s Specifications
Furnish and install three-piece gel-coated fiberglass shower stall Model 3PC-38-60H designed for barrier-free use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.2. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel corner grab bar; stainless steel recessed soap dish; white naugahyde folding wheelchair transfer seat (specify right or left hand).
Supplied with 2" brass drain.
Shower curtain optional.
Curtain Size: 72" x 72".
Standard Color: White.
Special order colors available.
Florestone Model 3PC-38-60H Institutional Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
35"
30"
1" Flange
60"
18" 36"
33"to
36"
77"
2"
18"*
78"
ControlArea
*Above inside �oor
60" x 36" x 78" Weight: 295 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2 ASTM-E84
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Two stainless steel grab bars
• Stainless steel recessed soap dish
• White naugahyde folding wheelchair transfer seat (specify right or left band)
• Optional: Phenolic folding wheelchair transfer seat (specify right or left hand)
21"
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
Architect’s Specifications
Florestone Model 60-33HTS Institutional Tub/Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Mod
el
60-3
3H
TS
Furnish and install one-piece gel-coated shower Model 60-33HTS designed for institutional use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel grab bars; 2 each 36", 1 each 18", 1 each 16"; molded corner soap dish.
59¾" x 32" x 80½" Weight: 175 lbs.
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Stainless steel grab bars: 2 each 36", 1 each 18" 1each 16"
• Molded corner soap dish
31"
6½"
15½"
56"59¾"
32"
33"to
36"
79"
13"
80½"
14½"
Mod
el 3
PC
-60-3
3H
TS
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
Architect’s Specifications
Furnish and install three-piece gel-coated shower Model 3PC-60-33HTS designed for institutional use as manufactured by Florestone Products Company. Basic shower will conform to ANSI-Z-124.1. Unit to include stainless steel curtain rod; Symmons® pressure balance mixing valve with concealed check stops; Moen® hand-held shower head with hose and stainless steel slide bar/grab bar; stainless steel grab bars; 2 each 36", 1 each 18", 1 each 16"; molded corner soap dish.
608.3.1.2 Vertical Grab Bar. A vertical grab bar 18 inches (455 mm) minimum in length shall be provided on the control end wall 3 inches (75 mm) minimum to 6 inches (150 mm) maximum above the horizontal grab bar, and 4 inches (100 mm) maximum inward from the front edge of the shower.
FlorestoneModel 3PC-60-33HTSInstitutional Tub/Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Standards:
I.A.P.M.O. File No. 0687ANSI-Z-124.2
Tub-Showercomes complete with accessories:
• Stainless steel curtain rod
• Symmons® pressure balance mixing valve
• Moen® hand-held shower head, hose and stainless steel slide bar/grab bar
• Stainless steel grab bars: 2 each 36", 1 each 18" 1each 16"
• Molded corner soap dish
59¾" x 32" x 80½" Weight:175 lbs.
31"
6½"
15½"
56"59¾"
32"
33"to
36"
79"
13"
80½"
14½"21"
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Dimensions may vary ± ¼" inch. Please check unit before installation.
For barrier-free installation,contractor shall provide recess for curb in sub floor.
Architect’s Specifications
Florestone Model 23-2HR Barrier-Free Terrazzo Shower Receptor
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
3 P
C-4
0-6
2H
— A
DA
Com
pli
an
t /
CA
AD
A C
om
pli
an
t
17
Furnish and install wheelchair accessible terrazzo shower receptor Model 23-2HR as manufactured by Florestone Products Company. Flanges on three sides, cast integral, shall be of galvanized-bonderized steel and shall extend not less than 1" above the shoulders. Shoulders on three sides shall be not less than 2½" inside. Threshold shall be not more than ½" above receptor floor to allow for barrier free entrance. Drain body shall be brass, cast integral, and shall provide for a non-caulked connection not less than one inch deep to a 2" pipe. Removable type stainless steel strainer plate shall be supplied. Receptor shall be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3,000 PSI, seven days after casting. Terrazzo surface shall be ground, polished, and the entire unit sealed to resist stains and moisture after any air holes and/or pits are grouted. Receptors reinforced with 16-gauge wire.
Note: Terrazzo is not designed to be used with anything that is over 130 degrees Fahrenheit.
Model 23-2HRBarrier free, wheelchair accessible Terrazzo Shower Receptor. Reduced threshold height for wheelchair accessibility.
46¼ x 52" x 3" Weight: 500 lbs.
Standards:
I.A.P.M.O. File No. 0687
Mod
el
60-3
3H
TS
46¼"23" 23"
7½"
52"
2½"
½" Inside �reshold
�reshold
4½"
1¼"
3"
1½"
Mod
el 5
00 B
arrie
r-Fre
e R
ece
pto
r
Dimensions subject to change without notice.
Contact Florestone Products to verify
product specifications.
Note: Exterior floor drain for water run-off recommended.
Architect’s Specifications
Furnish and install wheelchair accessible Terrazzo Shower Receptor Model 500 as manufactured by Florestone Products Company. Flanges on three sides, cast integral, shall be of galvanized-bonderized steel and shall extend not less than 1" above the shoulders. Shoulders on three sides shall be not less than 2½" inside. Model 500 to have integral ramp. Drain body shall be brass, cast integral, and shall provide for a non-caulked connection not less than one inch deep to a 2" pipe. Removable type stainless steel strainer plate shall be supplied. Receptor shall be manufactured of tan and white marble chips cast in white Portland cement to produce a compressive strength of not less than 3,000 PSI, seven days after casting. Terrazzo surface shall be ground, polished, and the entire unit sealed to resist stains and moisture. Receptors reinforced with 16-gauge wire.
Options
Offset drain Additional flanges (Drawings required)
Note: Terrazzo is not designed to be used with anything that is over 130 degrees Fahrenheit.
Model 500Barrier free Terrazzo Shower Receptors with built-in stainless steel ramp.
Florestone Model 500 Barrier-Free Terrazzo-Shower
2851 Falcon Drive • Madera, CA 93637
T. 559.661.4171 • T. 800.446.8827
F. 559.661.2070 • florestone.com
Standards:
I.A.P.M.O. International Association of Plumbing & Mechanical Officials. File No. 0687
A B C D E HT WT.
36" 36" 18" 18" 12" 7" 315
40" 40" 20" 20" 12" 7" 370
42" 48" 21" 21" 12" 7" 510
48" 48" 24" 24" 18" 7" 550
7"
1"
2⅝"
" High
2"Shoulder
E
6"
AD
B
C