MODEL248-36 FLIGHT CHAIN

CONVEYORCAT652 2nd EDITION

Beginning Serial # 550000November 1, 2016

Owner's NameDealer's NameSerial NumberDate Purchased

Model No.

1100 Holland RdSuffolk, VA 23434(757) 539-0231

1701 S. Slappey Blvd.Albany, GA 31701(229) 439-2217

TABLE OF CONTENTSCAT652

2nd EditionNovember 1, 2016

NOTESThe Terms "Left" and "Right" used in the description of parts are determined by

facing the direction of flow of material through the machine.

"A/R" found in the "No. Req'd" column denotes "As Required"."OPT" found in the "No. Req'd" column denotes "Optional".

1701 S. Slappey Blvd./P.O. Box 3687 Albany, GA 31701(229) 439-2217 / Fax 229) 439-9343

1100 Holland Road Suffolk, VA 23434 U.S.A. (757) 539-0231 / Fax - (757) 934-3264

248-36 FLIGHT CHAINCONVEYOR

248-36 Frame, Shields and Panels.....................................................................248-36 Drive Assembly........................................................................................248-36 Polyethylene Slides-Optional..................................................................Decals....................................................................................................................Numerical Parts Index...........................................................................................Warranty

3 5 7 910

PageDescription

DIRECTION OFMATERIAL FLOW

1

2

3

4

6

7

8

10

11

12

13

14

15

16

17

18

19

20

21

3

2

22

5

9

PA

GE

2

A/RA/RA/RA/RA/RA/R

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 4527 FLAP, INFEED; 248-36 12 60441 ROD, INFEED IDLER ADJUSTER 43 60442 BRACKET, INFEED ADJ. IDLER 24 61215 MOUNT, 248 DRIVE SHIELD 15 90845 PANEL,4' BOTTOM; 36" CONVEYOR 16 90850 PLATE, RETURN SLIDE ENTRY 17 90852 PANEL, INFEED TOP 18 96279-45 FRAME, 248-36X45 MAIN 1 - - SEE NOTE 2 - - 9 96283 PANEL, 36" CONV. 29-3/16" END 1 - - SEE NOTE 1 - -

10 122250 PANEL, INFEED FLAP MOUNTING 111 122251 PLATE, FLAP BACKING; 248-36 112 123571 SHIELD, 248 DRIVE 113 123572 SHIELD, BOTTOM 248 DRIVE 114 123573 MOUNT, SHIELD;GEARBOX 115 126250 BRACKET, IDLER 116 126522 EXTENSION, CONV. INFEED; RT 117 126523 EXTENSION, CONV. INFEED; LT 118 126524 EXTENSION, CONV DISCHARGE; RT 119 126525 EXTENSION, CONV DISCHARGE; LT 120 1200655 PANEL, INFEED END; 36" CONV. 121 1200656 MOUNT, GEARBOX/MOTOR; 248-36 1

FRAME, SHIELDS & PANELS

PAGE 3

- - NOTE 1 - -PART NUMBER DESCRIPTION QTY REQ'D COMMENTS

90849 PANEL, 36" CONVEYOR 53-1/4" END A/R96283-35 PANEL, 36" CONVEYOR 52-15/16" END90846 PANEL, 36" CONVEYOR 17-1/4" END96287 PANEL, 36" CONVEYOR 17-3/16" END96283 PANEL, 36" CONVEYOR 29-3/16" END96283-30 PANEL, 36" CONVEYOR 40-15/16 END96283-20 PANEL, 36" CONVEYOR 17-3/32 END

- - NOTE 2 - - FRAMES ARE AVAILABLE IN LENGTHS FROM 27FT TO 45FT, INCREMENTS WILL VARY

AFTER COMPLETING DRAWING AND TABLE, MOVE TABLE TO SHEET 2 AND ROTATE (3 TIMES).PLACE TABLE AT MARKER.

DIRECTION OFMATERIAL FLOW

13

4

6

7

89

10

11

12

13

14

15

16

17

18

19

3

4

6

7

8

8

8

911

11

11

25

SECTION TITLE: 248-36 DRIVES SIMP. REP: 248-36_DRIVES DKP, Nov-01-16CONVEYOR, 248-36 X 25 SAVED AS:248-36_DRIVES MODEL: 248-36X25 SCALE: 0.060 CHB;Oct-10-16

PA

GE

4

SHEET 1 OF 2

MOTOR, 5H/3P/460/1800/184TC/TEFC15165 MOTOR, 5H/3P/460/1800/184TC/TEFC

11406 GEARBOX, 20:1,TIGEAR-2,35Q,L,180TC 71464 248-36 5HP, 20:1 DRIVE KITGEARBOX, 20:1,TIGEAR-2,35Q,L,180TC 70060 248-12 2HP, 20:1 DRIVE KIT

11062 GEARBOX, 50:1,2HP (5/16 KEY) C-F

11092

70064 248-18/24 5HP; 20:1 DRIVE KIT

71464 248-36 5HP, 20:1 DRIVE KIT

51329 SPROCKET, 80B12 F1-1/2; 3/8K&SS 70064 248-18/24 5HP; 20:1 DRIVE KIT71464 248-36 5HP, 20:1 DRIVE KIT

5709 SPROCKET, 80B10 F1-3/8 70060 248-12 2HP, 20:1 DRIVE KIT

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 2020 NUT, 5/8-11,2X1-3/4 IDLER ADJ 12 2195 PIN, COTTER 3/16 X 1 1 A/R3 3111 BEARING, 2-3/16 PILLOW BLOCK 24 3119 BEARING, 1-15/16 PILLOW BLOCK 25 4457-50A PIN, WH-78 CONNECTOR 1 A/R6 4471 CHAIN, FEEDER FLIGHT; 18" CONVEYOR 2 A/R 46 PTICHES, 9 FIGHTS PER CHAIN SEGMENT7 5663 BUSHING, Q1 2-7/16 28 5687 SPROCKET, WH-78; 9 TOOTH W/HUB 49 5690 BUSHING, Q1 - 1-15/16 2

10 5691 BUSHING, Q1 - 2-3/16 111 5696 SUPPORT, FLIGHT 412 10335 SHAFT, DISCHARGE DRIVE 113 10336 SHAFT, INFEED IDLER 114 11406 GEARBOX, 20:1, TIGEAR-2,35Q,L,180TC 1 -- SEE NOTE 2 --15 15165 MOTOR, 5H/3P/460/1800/184TC/TEFC 1 -- SEE NOTE 1 --16 51329 SPROCKET, 80B12 F1-1/2 1 -- SEE NOTE 4 --17 51405 IDLER,80A12,5/8 BORE 118 4365D CHAIN, NO.80 DOM. ROLLER, 12 PITCHES/FT 1 A/R BY FT, 4365DA OFFSET, 4365DB CONNECTOR19 80Q60 SPROCKET, 80Q60 1 -- SEE NOTE 3 --

SAVED AS:248-36_DRIVES Nov-01-16

248-36 DRIVES

PAGE 5 SHEET 2 OF 2

-- NOTE 1 --PART NUMBER DESCRIPTION QTY REQ'D COMMENTS

15165 71464 248-36 5HP, 20:1 DRIVE KIT1 70064 248-18/24 5HP; 20:1 DRIVE KIT

15163 MOTOR, 3H/3P/460/1800/182TC/TEFC 1 70186 248-18/24 3HP, 30:1 DRIVE KIT15161 MOTOR, 2H/3P/460/1800/145TC/TEFC 1 70060 248-12 2HP, 20:1 DRIVE KIT

-- NOTE 2 --

11406 11

11064 GEARBOX, 30:1;2HP,NEMA 145 C-F 1GEARBOX, 30:1,3HP ONLY C-F 1

11401 GEARBOX, 21:1,BB683QUANTIS180TC 1

-- NOTE 3 --80Q60 SPROCKET, 80Q60 180Q70 SPROCKET, 80Q70 180Q48 SPROCKET, 80Q48 1

-- NOTE 4 --1

51977 SPROCKET, 80B10 F, 1-1/2 15705 SPROCKET, 80B12 F1-3/8 1

15756 SPROCKET, 80B12 F1-5/8 1

DIRECTION OFMATERIAL FLOW

1

2

3

4

5

6

7

5

6

2

2

2

2

2

2

22

2

3

3

3

3

PA

GE

6

A/RA/RA/R

A/RA/RA/R

ITEM PART NUMBER DESCRIPTION QTY SHOWN QTY REQ'D COMMENTS1 1573 WASHER, WELD 1.3/8 X 3/8 X 14 GA. 1 A/R2 13394 SLIDE, 8' TROUGH POLY 18" 103 13880 SLIDE, 8' X 39.625" RETURN POLY 54 13881 SLIDE, 4'-3" END BOTTOM POLY 1 - - SEE NOTE 1 - - 5 13882 SLIDE,27-5/8" TROUGH END POLY; 16" 2 - - SEE NOTE 2 - - 6 90779 FLAT, TOP SLIDE (18") 27 96284 FLAT, BOTTOM SPACER [43'] 1

248-36X45 POLYETHYLENE SLIDES - OPTIONAL

PAGE 7

- - NOTE 1 - - PART NUMBER DESCRIPTION QTY REQ'D COMMENTS

13881 SLIDE, 4'3" END BOTTOM POLY A/R13884 SLIDE, END BOTTOM; 35'13885 SLIDE, END BOTTOM; 30'13887 SLIDE, END BOTTOM; 20'

- - NOTE 2 - - 13882 SLIDE, 37-5/8" TROUGH POLY END13886 SLIDE, 3' TROUGH POLY13418-1 SLIDE, 1'4" TROUGH POLY

PAGE 8

1

3

2

4

5

DECALS

ITEM PART NO. DESCRIPTION QTY REQ'D

1 80935 DECAL, CAUTION: READ OP. MANUAL 1

2 80936 DECAL, CAUTION: 1-7 ITEMS 1

3 80941 DECAL, DANGER: ENTANGLEMENT/SHIELDS 1

4 80938 DECAL, DANGER: MOVING PARTS/CONVEYOR 4

5 80939 DECAL, DANGER: REMOTE START 2

-- 81011 DECAL, 18" AMADAS W/FLAG 2

USED BUT NOT SHOWN:

PAGE 9

NUMERICAL PARTS INDEX

PART NO. PAGE PART NO. PAGE1573 7 96283-35 34527 35705 55709 55756 511062 511064 511092 511401 511406 513394 713880 713881 713882 713884 713885 713886 713887 715161 515163 515165 551329 551977 560441 360442 361215 380935 980936 980938 980939 980941 981011 990779 7

10

90845 390846 390849 390850 390852 396283 396284 796287 3122250 3122251 3123571 3123572 3123573 3126250 3126522 3126523 3126524 3126525 31200655 31200656 313418-1 780Q48 580Q60 580Q70 596279-45 3

10