Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
45
Mobile container series RC/N
Because warehouse and
shipping space is valuable,
mobile containers of the
RC/N series are collapsible
and can be pushed together
to save maximum space for
transport and storage.
You choose the design –
two side panels, fully closed,
or with hinged intermediate
grates, either as standard or
optional equipment.
LOGISTICS + INDUSTRY | 02 TRANSPORTING
720660
1520
255
1775
855800
46
02.10 Mobile container RC/N1 Light design> Can be nested to save space
> Lockable
Design: Square tube frame chassis, welded. Hinged support surface made of wire mesh. Container structure of round tube frame with wire mesh and plastic hinges. Door opening angle 270º.
Castors: 2 fi xed and 2 swivel castors Ø 125 mm, made of polyamide.
Finish: High-gloss, galvanised, chrome-plated.
Technical specifi cations:
Total load capacity 350 kgLoad capacity per shelf 75 kgWeight 63 kgMesh size 100 x 50 mm
Basic model
Order numbers
Dimensions (mm): Width 720 x depth 855 Height 1775
Basic model order no. 06.16 386.50Accessories
Wire shelf 00.97 494.50
Dimensions in mm
RC/N1 Basic model with additional wire shelf (accessories)
� e locking mechanism can be secured with a padlock if required.
Locking
Space requirement in row
per mobile container 200 mm10 mobile containers 2655 mm50 mobile containers 10,655 mm
Can be nested to save space
LOGISTICS + INDUSTRY | 02 TRANSPORTING
730670
1565
1815
825750
250
X
Y
Z
47
02.11 Mobile container RC/N2 With two-part door> With clothes rail and wire shelf as standard
> Fully closed
Design: Square tube frame chassis, curved. Hinged support surface made of rectangular tube frame with wire mesh, reinforced with fl at steel strips. Container structure, made of round tube frame with wire mesh and plastic hinges. Two-part door with opening angle 270º.
Castors: 2 fi xed and 2 swivel castors Ø 125 mm, made of polyamide.
Technical specifi cations:
Total load capacity 400 kgLoad capacity per shelf 75 kgWeight 63 kgMesh size 100 x 50 mm
Basic model
Order numbers
Dimensions (mm): Width 730 x depth 825 Height 1815
Basic model order no. 06.17 515.50
Dimensions in mm
RC/N2 Basic model with hinged wire shelf (as standard)
Hinged. Made of round tube with plastic hinge.
Clothes rail
Space requirement in row
per mobile container 200 mm10 mobile containers 2655 mm50 mobile containers 10,655 mm
Made of metal. For stickers, labelling, etc. Size 114 x 323 mm
Plate
Finish: High-gloss, galvanised, chrome-plated.
Can be nested to save space
LOGISTICS + INDUSTRY | 02 TRANSPORTING
680620
1635
230
1865
870820680
620
1485
230
1715
870820
48
02.12 Mobile container RC/N3 type 1 Optimised for transporting European standard boxes> With wire shelf as standard
> Basis for many customer-specific variants
Design: Square tube frame chassis, curved. Hinged support surface made of fl at steel frame with wire, reinforced with fl at steel strips. Container structure, made of round tube frame with wire mesh and plastic hinges. Door opening angle 270º.
Castors: 2 fi xed castors, 2 swivel castors with brakes Ø 125 mm. Elastic tread, grey.
Technical specifi cations:
Total load capacity 400 kgLoad capacity per shelf 75 kgWeight 48 kgMesh size 50 x 50 mm
Basic model
Dims. (mm): Width 680 x depth 870 Height 1715 Height 1865
Basic model order no. 06.08 927.50 06.08 926.50
Dimensions in mm
RC/N3 TYPE 1 Basic model with height of 1715 mm and hinged wire shelf (standard)Supplied without standard boxes.
� e integrated foot-operated
rail aids movement over steps and door sills.
Moving aid
Space requirement in row
per mobile container 290 mm10 mobile containers 3480 mm50 mobile containers 15,080 mm
Can be nested to save space
Order numbers
Finish: High-gloss, galvanised, chrome-plated.
LOGISTICS + INDUSTRY | 02 TRANSPORTING
600540
1750
150
1900
802734
49
02.13 Mobile container RC/N3 type 2 Optimised for transport on the loading area of trucks> With wire shelf as standard
> With integrated foot-operated rail
Order numbers
Design: Square tube frame chassis, curved. Hinged support surface made of fl at steel frame with wire, reinforced with fl at steel strips. Container structure, made of round tube frame with wire mesh and plastic hinges. Door opening angle 270º.
Castors: 2 fi xed castors, 2 swivel castors Ø 125 mm, incl. 1 with brake. Elastic tread, grey.
Technical specifi cations:
Total load capacity 400 kgLoad capacity per shelf 75 kgWeight 51 kgMesh size 50 x 50 mm
Basic model
RC/N3 TYPE 2 Basic model with height of 1900 mm and attachable wire shelf (standard)
� anks to the narrow
width of 600 mm, 4 mobile containers can be arranged next to each other in most truck trailers.
Optimised dimensions for transport in trucks
Space requirement in row
per mobile container 300 mm10 mobile containers 3500 mm50 mobile containers 15,550 mm
Can be nested to save space
Finish: High-gloss, galvanised, chrome-plated.
Dimensions (mm): Width 600 x depth 802 Height 1900
Basic model order no. 06.36 387.50
Dimensions in mm
LOGISTICS + INDUSTRY | 02 TRANSPORTING
800765
1515
235
1750
820800
50
02.14 Mobile container RC/N5 Optimised for transport on the loading area of trucks> Can be nested to save space
> Three-sided design
Design: Square tube frame chassis, curved. Hinged support surface made of rectangular tube frame with wire and reinforced with fl at steel strips. Rear wire panel and edged metal sheet. Side panels made of round tube frame with wire mesh and metal hinges.
Castors: 2 fi xed and 2 swivel castors Ø 125 mm, made of polyamide.
Technical specifi cations:
Total load capacity 400 kgLoad capacity per shelf 75 kgWeight 45 kgMesh size 375 x 115 mm
Basic model
Order numbers
Dimensions in mm
RC/N5 Basic model
Safe and easy manoeuvring of the container.
Lateral recesses
Space requirement in row
per mobile container 210 mm10 mobile containers 2715 mm50 mobile containers 11,115 mm
� e net weight of the goods additionally secures the side panels.
Fixing
Finish: High-gloss, galvanised, chrome-plated.
Can be nested to save space
Dimensions (mm): Width 800 x depth 820 Height 1750
Basic model order no. 06.17 290.50Accessories
Wire shelf 00.62 326.50Textile tension belt 00.22 467.00Rubber tension belt 00.14 207.07
LOGISTICS + INDUSTRY | 02 TRANSPORTING
11801110
1720
260
1980
755690
51
02.15 Mobile container RC/N6 Optimised for transport on the loading area of trucks> With integrated moving aid
> Fully closed
Design: Square tube frame chassis, curved. Hinged support surface made of rectangular tube frame with wire and reinforced with fl at steel strips. Container structure, made of round tube frame with wire mesh and metal hinges. Door leaf opening angle 270º.
Castors: 4 swivel castors Ø 125 mm, incl. 2 with brakes. Elastic tread, grey.
Technical specifi cations:
Total load capacity 500 kgLoad capacity per shelf 75 kgWeight 100 kgMesh size 50 x 50 mm
Basic model
Dimensions in mm
RC/N6 Basic model with attachable wire shelf (standard)
� e integrated rail for operation by foot or forklift aids movement over steps and door sills.
Moving aid
Space requirement in row
per mobile container 400 mm10 mobile containers 4355 mm50 mobile containers 20,355 mm
Can be nested to save space
Order numbers
Finish: High-gloss, galvanised, chrome-plated.
Dimensions (mm): Width 1180 x depth 755 Height 1980
Basic model order no. 06.05 877.50Accessories
Wire shelf (additional) 00.52 930.50
LOGISTICS + INDUSTRY | 02 TRANSPORTING
660620
1505
139
1700
800
52
02.16 Mobile container RC/N8 Optimised for transport on the loading area of trucks> Can be nested to save space
> Textile tensioning belt as standard
Design: Chassis made of square tube frame, with bottom tray that can be folded up at the sides. Side panels made of square tube frame with spot-welded wire grate. Side panels rotatable around A frame. Incl. 2 textile tensioning belts.
Castors: 2 fi xed and 2 swivel castors Ø 100 mm, made of polyamide.
Finish: High-gloss, galvanised, chrome-plated.
Technical specifi cations:
Total load capacity 400 kgWeight 39 kgMesh size 140 x 165 mm
Basic model
Order numbers
Dimensions in mm
RC/N8 Basic model
Dimensions (mm): Width 660 x depth 800 Height 1700
Basic model order no. 06.23 844.50Accessories
Textile tensioning belt, red 00.75 222.00Rubber tension belt 00.14 207.07
� e bottom tray is attached to the side panels and is easy to fold up. � e side panels, which can now be freely swivelled, are pushed onto the A-shaped chassis and make it possible to push the mobile containers into each other.
Pivotable side panels
Space requirement in row
per mobile container 220 mm10 mobile containers 2780 mm50 mobile containers 11,580 mm
Can be nested to save space
LOGISTICS + INDUSTRY | 02 TRANSPORTING
RC/N8 nested,view from above