MOBILE ACCESS via NFC (Android) QUICK REFERENCE 1/1 Enable NFC Perform User Authentication* Register the MFP in PageScope Mobile 1. Place your Android device on the NFC area or NFC tag. PageScope Mobile is started.* 2. Tap Yes to register. 1. Position the original(s) 2. Place your Android device on the NFC area or NFC tag. PageScope Mobile is started. 3. Select the Scan function. 4. Make the desired scan settings. 5. Tap on Scan or place your Android device on the NFC area again. Scanning is processed. Print from an Android Device 1. Place your Android device on the NFC area or NFC tag. PageScope Mobile is started. 2. Select the file to be printed by using My Documents, Mail, Web, Camera or Photo. 3. Make the desired print settings. 4. Tap on Print or place your Android device on the NFC area again. Printing is processed. NFC area NFC area on the control panel NFC (Near Field Com- munication) provides a wireless connection between NFC-enabled devices a few centimeters away from each other. NFC tag 1. Unlock the panel of your Android device. 2. Place your Android device on the NFC area. The System is unlocked. *NFC authentication must be turned on and your authentication information must be registered in PageScope Mobile. Please refer to the PageScope Mobile help and user’s guide of the MFP for details. * If the PageScope Mobile App is not installed on your Android device, you will be automatically routed to the download page. Your Android device has to be prepared as follows: 1. Install PageScope Mobile for Android. 2. Enable the wireless connection. 3. Enable NFC. Scan to an Android Device NFC tag attached to the system Your Android device has to be prepared as follows: 1. Install PageScope Mobile for Android. 2. Enable the wireless connection. 3. Enable NFC. Depending on the system settings you can now: • start the PageScope Mobile app. • register the system and network information in PageScope Mobile. • start a print or scan function. • perform user authentication. Depending on the content of the NFC tag you can now: • start the PageScope Mobile app. • register the system and network information in PageScope Mobile. • start a print or scan function.

MOBILE ACCESS via NFC (Android) QUICK REFERENCE 1/1 · MOBILE ACCESS via NFC (Android) QUICK REFERENCE 1/1 Enable NFC Perform User Authentication* Register the MFP in PageScope Mobile

Download PDF Report

Upload
others
View
11
Download
0

Embed Size (px)

Citation preview

MOBILE ACCESS via NFC (Android) QUICK REFERENCE 1/1

Enable NFC Perform User Authentication*

1. Place your Android device on the NFC area or NFC tag.PageScope Mobile is started.*

2. Tap Yes to register.

1. Position the original(s)

2. Place your Android device on the NFC area or NFC tag.PageScope Mobile is started.

3. Select the Scan function.4. Make the desired scan set-

tings.5. Tap on Scan or place your

Android device on the NFC area again.Scanning is processed.

Print from an Android Device

1. Place your Android device on the NFC area or NFC tag.PageScope Mobile is started.

2. Select the file to be printed by using My Documents, Mail, Web, Camera or Photo.

3. Make the desired print set-tings.

4. Tap on Print or place your Android device on the NFC area again.Printing is processed.

NFC area

NFC area on the control panel

NFC (Near Field Com-munication) provides a wireless connection between NFC-enabled devices a few centimeters away from each other.

NFC tag

1. Unlock the panel of your Android device.2. Place your Android device on the NFC area.

The System is unlocked.

*NFC authentication must be turned on and your authentication information must be registered in PageScope Mobile. Please refer to the PageScope Mobile help and user’s guide of the MFP for details.

* If the PageScope Mobile App is not installed on your Android device, you will be automatically routed to the download page.

Your Android device has to be prepared as follows:1. Install PageScope Mobile for Android.2. Enable the wireless connection.3. Enable NFC.

Scan to an Android Device

NFC tag attached to the system

Your Android device has to be prepared as follows:1. Install PageScope Mobile for Android.2. Enable the wireless connection.3. Enable NFC.

Depending on the system settings you can now:• start the PageScope Mobile app.• register the system and network information in PageScope

Mobile.• start a print or scan function.• perform user authentication.

Depending on the content of the NFC tag you can now:• start the PageScope Mobile app.• register the system and network information in PageScope

Mobile.• start a print or scan function.