Alternative Software card for ML2 Controllers

As you know us as the developer of the USB Host Adapter (UHA), we like to introduce another innovative tool. The UHA is designed for the ML2i and ML3 controller, but cannot be used on a ML2 controller, which is the oldest of the controller series. Many of these 489 units are still operational in trades, and are used in the domestic market as cold storage.

Adapter Dimensions: L = 11,5 cm

W = 5,5 cm

H = 1,3 cm The available versions (same device, different software) AMS2000-005 ML2 Operating Software Adapter (SWR1207)

AMS2000-006 ML2 Controlled Atmosphere Software Adapter (SWR3113)

AMS2000-007 ML2 Datacorder Software Adapter (SWR2104)

AMS2000-008 ML2/ML2i Configuration Adapter (latest)

AMS2000-009 ML2i Software Adapter (SWR51xx or SWR 53xx)

How does it work?

This adapter works like the old “EPSON” cards. The old cards need to be programmed with a special programmer, which only works with very old computers. There are some people, who still have the “PB10” programmer. This adapter cannot be programmed by this pro-grammer. Therefor, on your request, we will program the card with the software or configu-ration at your choice.

The software or configuration will be stored on the internal memory of the adapter. This adapter is not equipped with a USB connector.

6 Months warranty

Epson card 

4