Automatic Lift Doors for the global market

Sematic Lift Doors is a leading brand in the global market for elevator components. By leveraging the wealth of expertise gained over the past 50 years, the Sematic Group has developed state-of-the-art technologies and cutting-edge solutions that have consistently anticipated market demand. Sematic Lift Doors represent an ongoing innovative thrust that is geared towards greater quality and safety with improved design and technology.

The right solution for every situation

The solutions offered by Sematic Lift Doors resolve a myriad of installation problems in terms of space and utilization. The Group’s products range from doors for residential and small-scale commercial properties to doors that have been designed and built for large-scale, complex environments. The technology used for high-rise and heavy-duty solutions makes the most of the Group’s consolidated experience. Sematic has what it takes to satisfy the superior performance levels demanded by these applications for standardized or customized doors. The basic structures can be enhanced by increasingly complex technical options anddesign features that serve both functional and aesthetic purposes (colors both simple and sophisticated, special coated finishes, fully glazed or framed structures) and can meet a wide range of design requirements. The Group’s extensive set of technical solutions, including under-track operators and doors with hidden bottom tracks, resolves problems that are both stylistic and technological in nature.

Specialists in special doors

Performance is always high on the priority list for Sematic Lift Doors. The Group’s commitment to safety and functionality is clear in its fire-resistant, vandal- proof, disability-friendly doors, and our range even includes doors constructed specifically for safety lifts for the exclusive use of fire-fighters in high-rise buildings. The drive towards customization and modernization is part of Sematic’s DNA, as evinced by our products for the remodeling and maintenance of existing systems.

AUTOMATIC DOORS

Sematic 2000 B-G

Sematic 2000 C - MOD

Sematic 2000 B

ML

Sematic 2000 B: Multipurpose door

Combining reliability and flexibility with pleasant aesthetic design for every architectural solution

Ideal for any application, Sematic 2000 B features high flexibility and a portfolio of finishes and fixings. Wide range of frame customizations, special executions, installation in the shaft or in recess are only a few of the features of this product. As an alternative to standard 135mm door posts, you can choose portal constructions, even with framed glass door posts and increased header. For the most demanding installations, the product can be further configured and customized: sizes can also be decreased and components can be designed on specific needs; Sematic Engineering department is at customers’ disposal for this scope, to satisfy any request.

Sematic 2000 B covers a wide range of international regulation requirements and fire certifications, even for glass executions; all of Sematic products are designed, produced and tested to satisfy high technical and qualitative standards, with special care to safety. Wherever aesthetics is a must, Sematic 2000 B offers prestigious solution, such as glass executions (with or without glass frame), hidden bottom track, under-driven operator and a pool of other options, make these products perfect for the integration into the most ambitious architectural projects.

2000 B - GENERAL FEATURES• Car and landing door in compliance with EN 81-

1/2:1998 - 95/16/EC Lift Directive• Opening ranging from 500 to 3.000• Height ranging from 2.000 to 3.000• 1,5 mm thick mild steel single skinned door panels• 1,5-2 mm thick (RAL 7032 powder painted) mild

steel header• Long life guide shoes• Bottom track pack starting from 160mm• Impact resistant packaging

SEMATIC 2000 C-MOD: Door for modernization

Enhancing performances, passenger safety and comfort in existing lift systems.

Do you need to upgrade your existing lift doors to comply with EN 81-80 requirements? Do you need a compact, flexible solution for modernization without giving up performance, quality, cost and safety? Sematic 2000 C-MOD is the answer. Featuring a wide range of options, 2000 C-MOD doors come with frame (C-MOD-Boxed Frame) or without (C-MOD-Naked and C-MOD-Naked Gap Closing), giving flexibility to your installation’s needs.

Car doors can be coupled with automatic (C-MOD K-AUT) or manual swing landing doors (C-MOD K-MAN), for those situations that need car door upgrade only. They can both be equipped with standard Sematic Drive System (SDS) controller for higher performances and control or with standard SRS for cheaper solutions.

Sematic 2000 C-MOD has a minimum 117mm bottom track package, making it a small and compact solution, without giving up robustness and quality that are typical of our products.

2000 C-MOD GENERAL FEATURES• Car and landing door in compliance with EN 81-

1/2:1998 - 95/16/EC Lift Directive• Opening ranging from 600 to 1400• Height ranging from 2000 to 2300• BOXED (framed) or NAKED (frameless) landing door• 1,2 mm thick mild steel single skinned door panels• 1,5 mm (RAL 7032 powder painted) mild steel

header• Long life guide shoes• Bottom track pack starting from 117mm• Compatibility kits available for a wide range of

existing installations• Impact robust packaging

SEMATIC 2000 B-G: Door for freights

Providing flexible solutions to satisfy the needs of goods transportation in every industry

Basing on 2000 B modular structure, Sematic further developed and focused this project answering to all those situations that need more robustness. The result is Sematic 2000 B-G, door for the transportation of goods; it well covers all those applications such as airports, undergrounds, railway stations, shopping centers, hospitals (e.g. for stretchers), service lifts in general (industrial, residential, offices), car transportation lifts and applications in which doors can potentially be hit.

Sematic 2000 B-G has a strong structure to withstand collisions; it features partially on the floor door posts (for an easier and more stable installation), steel made upper tracks, increased rollers for more robustness; all the components are studied with special care to quality, duration and to guarantee high performances.

Sematic 2000 B-G comes with different options and certifications covering a wide range of solutions, and if you can’t find what you need in our standard range, our engineering office is always at your disposal for product customization.

2000 B-G GENERAL FEATURES• Door conforming to EN 81-1/2:1998 - 95/16/EC

Lift Directive• Opening ranging from 1.000 to 3.500• Height ranging from 2.000 to 3.500• Reinforced frame and panels• 1,5 mm thick (powder painted color RAL 7032) mild steel header• 1,5 mm thick mild steel single skinned door panels• Steel upper tracks• Impact resistant packaging

www.medialift.it / info@medialift.it

This

docu

ment

is for

infor

matio

n purp

oses

only.

We r

eserve

the r

ight t

o mod

ify it

in an

y part

with

out n

otice.

There

may

be sl

ight d

ifferen

ces be

twee

n rea

lity an

d wha

t sho

wn in

litera

ture,

as re

gards

samp

les of

colou

rs an

d ima

ges o

f prod

ucts.

Vers.

: 05-

2011