AGRICULTURE HORTICULTURE GREENHOUSE

TM

A step up from (proportioningdosing injectorsare waterdriven only, withno other energyrequired

I n j e c t o r s

StandardPerfect Blending

Different Models ApplicationFertigationWater TreatmentSupplementationDisinfection and Cleaning ofLines and InstallationsFertigation for sprinkler systemsIrrigationpH control

••••

•••

TM

TM

the past

How does it work?Water driven, non-electricPiston driven by water flowSolution is added in proportion towater flow for accurate mixingSolution constantly added as waterflows through unitRatio of additive remains constant

•••

•

•

Different Methods

External BypassChemical Resistant

Internal BypassChemical Resistant Compact

Models

TF-10TF-10-001: Rate of additive: 0.1% to 1%TF-10-002: 0.2% to 2%TF-10-005: 1% to 5%Water pressure from 1-8 bar (14.7 to 120PSI)Flow Rate from 0.5-10 m3 (2 to 45GPM)Size: 53x29 cm (20.18" high x 11.36" wide)Weight: 5.530 kg (12.2 pound)Coupling: 50 mm or 1.5"

TF-15TF-15-002: Rate of additive: 0.3%to 2.5%TF-15-005: 1% to 5%Water pressure from 1-8 bar (14.7 to 120PSI)Flow Rate from 2-25 m3 (4.4 to 110 GPM)Size: 153x39 cm (60.45" high x 15.45" wide)Weight: 15.5 kg (34.2 pound)Coupling: 2"

TF-25TF-25-002: Rate of additive: 0.3%to 2.5%TF-25-005: 1% to 5%Water pressure from 1-8 bar (14.7 to 120PSI)Flow Rate from 2-25 m3 (4.4 to 110 GPM)Size: 153x39 cm (60.45" high x 15.45" wide)Weight: 15.5 kg (34.2 pound)Coupling: 63 mm / 2" / 2" (Double union)

TM

2502Rate of additive: 0.3% to 2%Water Pressure from 0.2-8 bar (2.9 to 120PSI)Flow rate from 20-2500 l/h (5.3 to 660 Gal/h)Size: 56-18.5 cm (22" high x 7.27" wide)Weight: 1.270 kg (2.8 pound)Coupling: 3/4"

2504Rate of additive: 0.4% to 4%Water Pressure from 0.2-8 bar(2.9 to 120 PSI)Flow rate from 30-2500 l/h (8 to 660 Gal/h)Size: 56x18.5 cm (22" high x 7.27" wide)Weight: 1.270 kg (2.8 pound)Coupling: 3/4"

2506Fix Rate of additiveis: 6%Water Pressure from 0.2-8 bar (2.9 to 120 PSI)Flow rate from 40-2500 l/h (10 to 660 Gal/h)Size: 56x18.5 cm (22" high x 7.27" wide)Weight: 1.270 kg (2.8 pound)Coupling: 3/4"

2510Rate of additive: 3% to 10%Water Pressure from 0.2-8 bar (2.9 to 120 PSI)Flow rate from 50-2500 l/h (13.3 to 660 Gal/h)Size: 56-16 cm (22" high x 6.2" wide)Weight: 1.580 kg (3.5 pound)Coupling: 3/4"

2512Dosing By Pass InjectorRate of additive: 0.3% to 2%Water Pressure from 0.2-8 bar (2.9 to 120 PSI)Flow rate from 40-2500 l/h (10 to 660 Gal/h)Size: 56-18.5 cm (22" high x 7.27" wide)Weight: 1.580 kg (3.5 pound)Coupling: 3/4"

2514Dosing By Pass InjectorRate of additive: 0.4% to 4%Water Pressure from 0.2-8 bar (2.9 to 120 PSI)Flow rate from 100-2500 l/h (26 to 660 Gal/H)Size: 55.8x18.5 cm (22" high x 7.27" wide)Weight: 1.580 kg (3.5 pound)Coupling: 3/4"

ModelsTM

Cart• 35 liter (9.5 gallon capacity)• Rubberized pneumatic tyres• Hose hook on rear of unit• Equipped with a spray gun• Can be available with all 3/4” MixRite Models

CAUTION All injectors must have a back-flowprevention valve installed on the inlet side of theinjector according to local specifications.

12500Rate of additive: 0.2% fixe dosingWater Pressure from 0.2-8 bar (2.9 to 120 PSI)Flow rate from 20-2500 l/h (5.3 to 660 Gal/h)Size: 56x16 cm (22" high x 6.3" wide)Weight: 1.270 kg (2.8 pound)Coupling: 3/4"

PVDF Models*Water Pressure from 0.2-8 bar (2.9 to 120 psi)Flow rate from 20-2500 l/h (5.3 to 660 Gal/h)Size: 56x16 cm (22" high x 7.27" wide)Weight: 1.270 kg (3.5 pound)Coupling: 3/4"

Optional: PVDF Body and Hastelloycomponents are available forvery aggressive chemical applications

*

TM

14

2

3

5

6

7

Main Water pipe

Recommended standard Installation1. Main Valve2. Back flow preventor3. Pressure regulator4. Filter - 130 Micron Min. (130 mesh)5. Manometer (pressure gauge)6. Anti siphon Valve7. Operate Valve

Recommended installations

4

56

7

8

9

12

3

Main Water pipe

Typical bypassinstallation when usinglarge fertilizer tanks1. Main Valve2. Filter - Ø 3/4”-130 Micron Min.3. Pressure regulator4. Choking Valve5. PVC fertilizer Valve6. Fertilizer Filter7. Normally close hydraulic Fertilizer Valve8. Fertilizer solution tank9. 5/16” command tube

DoRiteParallel installation

1 2

3

4

Bypass installationwith 4 different additives1. Main Valve2. Filter - 130 Micron Minimum3. Chocking Valve4. Fertilizer filter

Main Water pipe

LDPE Tube ø25 mm

Optional: PVDF Body and Hastelloycomponents are available for aggressivechemical applications

Optional: 63 mm x 2” union N.P.T. thread adaptorsOptional: 50 mm x 11/12” union N.P.T. thread adaptorsAdditive indicator Electric Signal output is availablefor all models.Remote Electric/Hydraulic On/Off divice is available forall models.Can be supplied with 11/2” inlet-outlet

*

*****

General Technical Information

2508 New

2500

2502*

2504*

2510*

2506*

TF-25

TF-25

TF-25

TF-15

TF-15

TF-15

TF-10 New

TF-10 New

TF-10 New

20-2500 l/h5.3 to 660 GPh20-2500 l/h5.3 to 660 GPh20-2500 l/h5.3 to 660 GPh30-2500 l/h8 to 660 GPh50-2500 l/h13.3 to 660 GPh40-2500 l/h10 to 660 GPh2 to 25 m3/h4.4 to 110 GPM2 to 25 m3/h4.4 to 110 GPM2 to 25 m3/h4.4 to 110 GPM2 to 25 m3/h4.4 to 110 GPM2 to 25 m3/h4.4 to 110 GPM2 to 25 m3/h4.4 to 110 GPM0.5 to 10 m3/h2 to 44 GPM0.5 to 10 m3/h2 to 44 GPM0.5 to 10 m3/h2 to 44 GPM

0.2 - 8 bar2.9 - 120 psi0.2 - 8 bar2.9 - 120 psi0.2 - 8 bar2.9 - 120 psi0.2 - 8 bar2.9 - 120 psi0.2 - 8 bar2.9 - 120 psi0.2 - 8 bar2.9 - 120 psi14.7 - 120 psi

14.7 - 120 psi

14.7 - 120 psi

14.7 - 120 psi

14.7 - 120 psi

14.7 - 120 psi

14.7 - 120 psi

14.7 - 120 psi

14.7 - 120 psi

Flow RateRange

Model PressureRange

Dosage%

Connectors

0.08 - 1

0.2

0.3 - 2

0.4 - 4

3 - 10

6

0.1 - 1

0.3 - 2.5

1 - 5

0.1 - 1

0.3 - 2.5

1 - 5

0.1 - 1

0.2 - 2

1 - 5

3/4”

3/4”

3/4”

3/4”

3/4”

3/4”

63 mm**

63 mm**

63 mm**

2”

2”

2”

50 mm***

50 mm***

50 mm***

PulsRite SystemWhat do we need it for?

The system allows all common professional irrigation controllersto collect the data regarding the amount of fertilizer or additiveinjected by the MixRite injector.

• The data transmitted into the controller can be used to record the quantities of fertilizer or additive injected

into the irrigation system.

• The controller can also be pre-programmed to stop or start the MixRite injector by shutting or opening a

hydraulic/electric valve located before the MixRite inlet. This type of integration allows 3/4” diameter Metamix

to be installed in bigger diameter water lines as a “bypass installation”.

• In this type of installation, the MixRite

injector is used as a “technical injector”.

The proportioning method is created by

the electric controller, allowing pre-

programmed quantities of fertilizer to be

injected evenly into the total amount of

irrigated water.

• The PulseRite system can also be used

to record quantities of additive by hooking

it to a simple counter with ability to read

the pulses and display it clearly.

(

TEFENManufacture & Marketing Plastic Products

Nahsholim 30815 IsraelPhone: 972-4-6395554Fax: 972-4-6390813

Recommended Accessories

3/4” FlowGuard38220000002

3/4” PressureRegulator38030200002

3/4” Water Filter38000000172

1/4” Manometer(Pressuer gauge)38030200003

3/4” Femalepipe coupling12010312122

Suction footvalve36000000029

3/4” StaticPressure regulator38030200001

3/4”x3/4pipe bushing38030200005

3/4” Backflow preventor38030200004

3/4” Fertiguard38220000001

3/4” Antisiphon kit36073008002

Remote Hydraulicon/off system

export@tefenplastic.comwww.tefenplastic.com

1.20

08