MISSION INCOMING MISSION 1.9 Our Department of Drone Gadget Engineering (DODGE)

SECURITY LEVEL: INTERMEDIATE

secretcode<agent> 00000 1 00000 19299292 <INCOMINGMISSION> 0000000 <NOPARENTSALLOWED>


PRINT THIS DOCUMENT IMMEDIATELY

MISSION INCOMING

MISSION 1.9

</Touch Down>

</Mission Briefing>

Our Department of Drone Gadget Engineering (DODGE) is working on a new propeller for a range of drones.

The drones will be faster than ever before, and may or may not include cup holders and fart cannons.

DODGE has just designed a new propeller. We want you to make a prototype, design a landing pad, and then test our designs. If your tests are successful, we will use this design in our next range of drones.

</Mission Instructions>

Step 1: Make a prototype propeller. This is our latest design for a drone propeller. It's just a prototype (the real propellerwon't be made of paper), but it will still allow you to run some tests.

1. With the help of a trusted grown-up, cut out the prototype propeller (below).

2. Fold along the dotted lines.

3. Add something heavier than a piece of paper (like a paperclip) to the bottomof the prototype propeller.

CODE NAME:

</paperclip>

</DODGE prototype propeller 2.34> </fold here>

</fold here>


IMPORTANT MISSION

</Touch Down>



Step 2: Make a landing pad for your prototype propeller. Good work, Agent. To test your propeller, you will now need a landing pad.

Colour the squares that are identified by the grid references (below). What secret letter is revealed? This secret letter is on all of our landing pads. It helps a drone to work out where it’s meant to be going.

DODGE already made a start on this, but then our pen ran out (even the best spy agencies have stationery problems)

A B C D E F G

60B 60F 50C 50E 40D 30C 30E 20B 20F

10

20

30

40

50

60

70

Grid References


IMPORTANT MISSION

</Touch Down>


</Mission Report>


Step 3: Test your prototype propeller

Cut out your new badge and stick it into your Agent Logbook.

</Mission Badge>

</Key Clue 1.9>

Crac

k th

is c

lue

to re

veal

the

secr

et k

ey

to u

nloc

k le

vel 2

.

Key:

DO

DG

E ha

ve c

ross

ed o

ut 6

0_.If you’ve completed this mission, go to ciakids.org/

missions to submit your mission report.

Else email us a photo of your missionto [email protected]

Else send your completed mission by post to the CIA HQ

at 20 East Road, London, N1 6AD.

Then get your Agent Logbook at www.ciakids.org and

stick in your Mission Badge.

Step 4: Send us your findings, and we will use them to update our drone designs.

How many times did your propeller land on the landing pad?

How many minutes did it take to complete your experiment?

How many times did you go to the toilet during the experiment?

Now you have a propeller and a landing pad. It’s time to put them both to the test.

1. Put your landing pad on the floor.

2. Stand up, and hold your propeller above the landing pad.

3. Drop the propeller onto the landing pad.

4. Repeat this twenty times.

5. Record your results below.

Documents

MISSION INCOMING MISSION 1.9 Our Department of Drone Gadget Engineering (DODGE)