Mission First Tactical Catalog 2014

MISSION FIRST TACTICALMADE PROUDLY IN THE USA

2014

From beginning to end, success of the Mission is what every brave individual operating in harm’s way, strives for. Success of the Mission is so fundamental to our company values we named our company Mission First Tactical. Mission First Tactical develops select rifle/carbine accessories specifically for the Military and Law Enforcement markets. Civilian shooters too benefit from receiving leading edge, affordable products. Design of these accessories centers on the need for enhanced accuracy and functionality of the weapons systems, improving Operator effectiveness. MFT brings to the Mission accessories that aid in rapid target acquisition and rapid, repeatable, accurate shot sequences. MFT designs are created, tested and approved by top operators under the harshest of conditions. MFT’s commitment recognizes the evolution of warfare and law enforcement missions by providing equally evolutionary products to assist the Operators in successfully completing the mission.

Use of advanced materials, smart design and technology are the core of our products. Proudly MFT along with E.I. DuPont’s Military Plastics Division has developed new materials adding the advantage of weight reduction with increased strength and durability to our products.

MFT’s Ownership Team has over 75 years of industry experience in providing the guidance to take concepts from mere ideas to front-line employment. Development and manufacturing processes are accomplished entirely in the USA.

www.missionfirsttactical.com

Statement of mission intent CONTENTSIbattlelink™ STOCKSUtility stock series is the next generation of drop-in replacement butt stock technology

REACT™ VERTICAL GRIPSGrip series is the next generation of forward grip technology, aiding in faster target acquisition, accuracy and reduced fatigue.

ENGAGE™ PISTOL GRIPSGrip series provides a combination of fit, form and function unparalleled by the originally supplied pistol grip.

TORCH™

ILLUMINATION DEVICES Mounts maximize mounting options for illumination devices and lasers, while providing a minimal profile.

E-VOLV™ (E2) ATTACHMENTSEquipment series is the next generation of enhancements for original equipment.

TEKKO™

PICATINNY RAIL SYSTEMIntegrated rail systems allow customized mounting options for mission specific accessories not possible with original handguards.

MFT SIGHTS Sighting solutions mount onto a 1913 Picatinny rail replacing the carry handle sight. Designed for AR-15 - M4 Flat Top configured rifles, will work with other similarly configured rifles.

MFT MAGAZINESMagazines over engineered for today’s modern warrior, utilizing DuPont’s Military Plastic Division super tough polyamide.

MFT CLASSIC™Series features accessories with at least a decade of combat proven performance and durability.

MFT LIFESTYLESection features accessories intended for use by badass’s or those they determine badass’s.

04 24

10 28

14 30

18

22

32

3802 03

BATTLELINK™ Stocks are the evolution of battlefield technology manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division. Putting the stock to your shoulder is the foundation of any stock. Holding true to the basics while adding functionality with the minimal amount of material possible was our goal. Beginning to end, success of the Mission is what every brave individual operating in harm’s way, strives for. Mission First Tactical develops evolutionary rifle/carbine accessories reducing Operators strain and fatigue, increasing effectiveness, target acquisition and accurate shot sequences.

BATTLELINK™

04 05

Camo Grey36170

Foliage Green34160

Flat Dark Earth20270

Scorched DarkEarth

COLOR OPTIONS:

Ibattlelink™ MINIMALIST STOCK

Ibattlelink™

MINIMALIST STOCK WITH NRAT STRAP

Slide-on replacement for original collapsible butt stock.

Angled non-slip rubberized buttpad allows faster presentation, even with body armor.

Quick Detach Sling mounting point is positioned for optimum usage including ambidextrous shooters

Upper section provides enhanced cheek weldPatent Pending

Available in MIL SPEC (BMSMIL)

Made in the USA

With heavy input from operators from all spectrums we saw the need to make a stock that offers all of the functional requirements while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and is able to accept a new optimized sling configuration. This ultimately makes our stock the lightest in today’s AR accessories market.

Approximately 8 feet of Paracord braided in a regular weave directly onto a Battlelink Minimalist Stock adding only a half an ounce to the weight. The strap will not interfere with the use of the QD mount or it’s benefit to ambidextrous shooters. To give the devil it’s due this idea was given to us from the genius’s at NEMO Arms http://nemoarms.com/, which is why the strap it’s called the NEMO Rapid Assault Team Strap or NRAT Strap.

KEY FEATURES:

Slide-on replacement for original collapsible butt stock.

Angled non-slip rubberized buttpad allows faster presentation, even with body armor.

Quick Detach Sling mounting point is positioned for optimum usage including ambidextrous shooters

Upper section provides enhanced cheek weldPatent Pending

Available in MIL SPEC (BMSMIL)

Made in the USA

KEY FEATURES:

BMS TECHNICAL SPECIFICATIONS

BMS TECHNICAL SPECIFICATIONSWeight: 2.72ozHeight: 4.069”

Weight: 2.72ozHeight: 4.069”

Width: 2.190”Length: 5.546”


06 07

Ibattlelink™ 401 GPS UPPER MOUNT

Ibattlelink™ 401 GPS LOWER MOUNT

Designed for use with the Garmin 401Ambidextrous Mounting Option

Designed for use with the Garmin 401401 screws into mount usingGarmin provided hardware

Designed for use with BattlelinkStock Series

Ambidextrous Mounting OptionDesigned for use with BattlelinkStock Series

The BATTLELINK™ 401 Upper Mount (B401UM) mounts to MFT’s Battlelink Stock Series. This mount provides operators the ability to utilize their Garmin 401’s to visualize location, positioning, and rally points in “real time” presentation while maintaining weapon retention. Operators hands maintain position with weapon retained in the direction of threat while accessing the GPS. Securely mounted to the stock which decreases the chances of loosing valuable battlefield location data and is one less piece of equipment to keep track of. The 401 will be much easier to monitor because it’s attached to a larger serialized controlled item, the weapon. Two (2) tool-less stainless steel mounting screws allow the operator to quickly and easily access the batteries or remove the 401 while in the field. Garmin supplied Philips head screws can be utilized, design allows for ambidextrous mounting options. Manufactured out of 6061 T651 aluminum, the kit includes two stainless steel tool-less 401 mounting screws and a foam pad that eliminates all undesirable rattle. 2 ounces and made in the USA.

The BATTLELINK™ 401 Lower Mount (B401LM) mounts to MFT’s Battlelink Utility stock (BUS). This mount provides operators the ability to utilize their Garmin 401’s to visualize location, positioning, and rally points in “real time” presentation while maintaining weapon retention. Operators hands maintain position with weapon retained in the direction of threat while accessing the GPS. Securely mounted to the stock which decreases the chances of loosing valuable battlefield location data and is one less piece of equipment to keep track of. The 401 will be much easier to monitor because it’s attached to a larger serialized controlled item, the weapon. Two (2) tool-less stainless steel mounting screws allow the operator to quickly and easily access the batteries or remove the 401 while in the field. Garmin supplied Philips head screws can be utilized, design allows for ambidextrous mounting options. Manufactured out of 6061 T651 aluminum, the kit includes two stainless steel tool-less 401 mounting screws and a foam pad that eliminates all undesirable rattle. 1 ounce and made in the USA.

KEY FEATURES:

KEY FEATURES:

B401UM TECHNICAL SPECIFICATIONSWeight: 0.56ozHeight: 1.647”


B401LM TECHNICAL SPECIFICATIONSWeight: 0.16ozHeight: 1.601”


Ibattlelink™ UTILITY STOCK

Ibattlelink™ LOW PROFILE STOCK

Slide-on replacement for original collapsible butt stock

Angled non-slip buttpad allows fasterpresentation, even with body armor

Pivoting rear accessed large and water resistant storage compartment

Customizable foam storage block withquick access tab diminishes rattle

Slide-on replacement for original collapsible butt stock

Angled non-slip buttpad allows fasterpresentation, even with body armor

Pivoting rear accessed large and water resistant storage compartment

Customizable foam storage block withquick access tab diminishes rattle

Quick Detach Sling mounting points (2) are positioned for optimum usage

Upper section provides enhanced cheek weldAccessory mounting provisions

Available with commercial tube assembly (BUST) (Kit Includes: 6 position buffer tube; Spring; Buffer; Lock ring; Latch Plate)

Available in MIL SPEC (BUSMIL)

Quick Detach Sling mounting points (2) are positioned for optimum usage

Upper section provides enhanced cheek weldAccessory mounting provisions

Available with commercial tube assembly (BUST) (Kit Includes: 6 position buffer tube; Spring; Buffer; Lock ring; Latch Plate)

Available in MIL SPEC (BUSMIL)

This stock adapts and changes to your environment or operational needs, from storing additional items to utilizing custom accessory mounts and is able to accept any type of sling configuration. There are three sling slot options and two quick detach mounts, forward and rear, and the cage offers multiple hand hold options. MFT’s accessories can easily be mounted Utilizing the sling slots and accessory rails, this includes Garmin 401 Mounts or a adjustable cheek piece. Taken as a whole, this makes our stock superior in today’s AR accessories market.

This stock adapts and changes to your environment or operational needs, from storing additional items to utilizing custom accessory mounts and is able to accept any type of sling configuration. There is one sling slot option and two quick detach mounts, forward and rear. MFT’s accessories can easily be mounted Utilizing the sling slots and accessory rails, this includes Garmin 401 Mounts or a adjustable cheek piece. Taken as a whole, this makes our stock superior in today’s AR accessories market.

KEY FEATURES:

KEY FEATURES:

BUS TECHNICAL SPECIFICATIONSWeight: 9.01ozHeight: 5.224”


BULS TECHNICAL SPECIFICATIONS



08 09

Ibattlelink™

ADJUSTABLE CHEEK PIECE

Ibattlelink™

NRAT - BMS AFTERMARKET STRAP

Stable Shooting Platform with1.25 inches of travelCharging handle can be operatedwith cheek piece in any positionother than indicated by stop

Designed for use with BATTLELINK™ Stock Series

The BATTLELINK™ Adjustable Cheek Piece (BACP) is the solution to varying heights of mounted optics and proper eye alignment. When used in conjunction with the MFT Battlelink Stock series of collapsible stocks, the BACP easily and quickly adjusted to provide the user with optimal eye-to-optic focus and a strong cheek weld contact position. While minimizing muscle and eye strain, the BACP allows the full usage of the charging handle due to the built-in limiting stop that insures interference-free operation of the rifle.

Approximately 7 feet of Paracord braided in a regular weave that can be mounted onto a Battlelink Minimalist Stock. Adding only a half an ounce to the weight, the strap will not interfere with the use of the QD mount. For those looking for a less permanent solution that allows the user to mount and dismount the NRAT strap easily.

KEY FEATURES: BACP TECHNICAL SPECIFICATIONSWeight: 2.72ozHeight: 4.069”


10 11

REACT™ SHORT GRIP

REACT™ FOLDING GRIP

Secure water resistant plugged battery orpart storage

Customizable storage system withquick access tab diminishes rattle

Flat non-slip bottom surface aids insupported firing positions

International shipments DO NOT require anexport license, this item ships freely

Allows deployment in either vertical orhorizontal position

Push button allows easy selection of positionSecure water resistant storage compartment

Customizable storage system with quick access tab diminishes rattle Flat non-slip bottom surface aids in supported firing positions


The REACT™ Short Grip (RSG) is a compact textured vertical grip designed to minimize material and dimension while maximizing functionality, designed to provide a positive grip surface with wet or gloved hands. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is light weight simplicity.

The REACT™ Folding Grip (RFG) is a compact textured vertical grip designed to deploy in either a vertical or horizontal position and provides a positive grip surface with wet or gloved hands. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is low viz operations, easy storage, and/or use of a bipod without interference.

KEY FEATURES:

KEY FEATURES:

RSG TECHNICAL SPECIFICATIONSWeight: 2.0ozHeight: 3.960”


RFG TECHNICAL SPECIFICATIONSWeight: 3.73ozHeight: 4.314”


The REACT™ Grip grip series is the next generation of forward grip technology, aiding in faster target acquisition, accuracy and reduced fatigue. Designed with storage for use with 1913 Picatinny Rail and NATO STANAG 4694. Optional quick detach mounting systems available. MADE IN THE USA.

REACT™COLOR OPTIONS:

Camo Grey36170

Foliage Green34160


Scorched DarkEarth

12 13

REACT™ QUICK DETACH GRIP

REACT™ TORCH GRIP

Quick detach vertical grip

Grooved gripping surfaces to eliminatehand slippage

Secure water resistant storage compartment


Combination vertical grip andillumination mount

Accepts light sources of .75, .825”,1” diameter

Lock-out switch prevents unintentionalactivation of light source

Grooved gripping surfaces to eliminatehand slippage

Pressure pad well is designed forSurefire™ ST Switch and allow accessoryactivation for both RH and LH Operators

Thumb activation switch for wireless light activation


Customizable storage system withquick access tab diminishes rattle

Flat non-slip bottom surface aids insupported firing positions


The REACT™ Quick Detach Grip (RQDG) is a full-fist sized textured vertical grip designed to quickly detach or attach without the use of tools and provides a positive grip surface with wet or gloved hands. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is to have the ability to quickly and toollessly rearrange your vertical grip setup.

The REACT™ Torch Grip (RTG) is a combination compact textured vertical grip and illumination mount. Designed to minimize material and dimension and utilize the use of a .75, .825, or 1” diameter flashlight/laser. Designed to provide a positive grip surface with wet or gloved hands, and allow the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is a vertical grip that will mount a large variety of flashlights/lasers.

KEY FEATURES:

KEY FEATURES:

RTG TECHNICAL SPECIFICATIONSWeight: 7.4ozHeight: 4.727”

RQDG TECHNICAL SPECIFICATIONS




REACT™ FULL SIZE GRIP

REACT™ MAGWELL GRIP

Full sized vertical grip

Contoured finger swells allow a firm grip even with gloved hands


Customizable storage system with quick access tab diminishes rattle

Flat non-slip bottom surface aidsin supported firing positions


Allows mid-point balance and less effort to direct muzzle

Pressure pad wells are designed forSurefire™ ST Switch and allow accessoryactivation for both RH and LH OperatorsSecure water resistant storage compartment

Will not interfere with magazine

Designed for M16/M4/AR15/HK416

The REACT™ Full-size Grip (REG) is a full-fist sized textured vertical grip with finger swells designed to provide a positive grip surface with wet, gloved or large hands. This grip allows the support hand to apply rearward pressure to keep the weapon shouldered to enhance muzzle control and accuracy. This is the grip you want if your objective is maximum grip and control.

The REACT™ Magwell Grip (RMG) is a compact textured vertical grip designed for close hand hold application at the low ready or CQB situations. Designed to provide a positive grip surface with wet or gloved hands. Locates support hand forward of the magazine well to prevent injury should an overcharged round cause the ejection of the magazine. This grip also incorporates right and left handed pressure pad wells for wired switches and a spare battery storage compartment. This grip allows the support hand to apply rearward pressure keeping the weapon shouldered, yielding better muzzle control and accuracy. This is the grip you want if your objective is a close hold grip with added safety.

KEY FEATURES:

KEY FEATURES:

REG TECHNICAL SPECIFICATIONSWeight: 2.3ozHeight: 4.601”


RMG TECHNICAL SPECIFICATIONSWeight: 2.2ozHeight: 3.622”


14 15

ENGAGE™

EPG16 INTERCHANGEABLE PISTOL GRIP

ENGAGE™

EPG47 INTERCHANGEABLE PISTOL GRIP


Any combination of interchangeable backstraps and finger swells allow for a customfit for any sized hand

Covers the receiver gaps that causediscomfort during sustained usage

Designed for AK47

Any combination of interchangeable backstraps and finger swells allow for a customfit for any sized hand

Grip angle replicates M16 while not affectingtrigger contact





922R Compliant

The ENGAGE™ tactical pistol grip with interchangeable front and back straps (EPGI16)provides a combination of fit and function unequaled by the originally supplied M16/AR15/M4/HK416 pistol grip. Textured finger swells (3) and back straps (3) allow the user to custom fit the grip to their own hand size and comfort. A secure watertight storage compartment with customizable storage sled and a quick access tab diminishes all rattle.

The ENGAGE™ tactical pistol grip with interchangeable front and back straps (EPGI47) provides a combination of fit and function unequaled by the originally supplied AK47 pistol grip. The grip angle replicates that of the M16, but does not affect the grip-to-trigger dimension. Textured finger swells (3) and back straps (3) allow the user to custom fit the grip to their own hand size and comfort. A secure watertight storage compartment with customizable storage sled with quick access tab diminishes all rattle.

KEY FEATURES:

KEY FEATURES:

EPGI16 TECHNICAL SPECIFICATIONSWeight: 3.7ozHeight: 4.847”


EPGI47 TECHNICAL SPECIFICATIONSWeight: 3.5ozHeight: 4.091”


The ENGAGE™ tactical pistol grip series provides a combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416/AK47 pistol grip. The finger swells are textured and the grooved backstraps provide a positive grip surface with wet or gloved hands. There is a secure watertight storage compartment with plug retention for one handed storage access. A customizable storage sled with quick access tab diminishes all rattle. MADE IN THE USA.

ENGAGE™

Camo Grey36170

Foliage Green34160


Scorched DarkEarth

COLOR OPTIONS:

16 17

ENGAGE™ EPG16 TACTICAL PISTOL GRIP

ENGAGE™ EPG47 TACTICAL PISTOL GRIP


Covers the receiver gaps that causediscomfort during sustained usage

Finger swells and a groovedbackstrap provide a non-slip grip


Plug retention for one handed storage access


Designed for AK47

Full sized pistol grip replaces thinneroriginal for a full-fisted hold

Grip angle replicates M16 while not affectingtrigger contact

Finger swells and a grooved backstrapprovide a non-slip grip


Plug retention for one handed storage access


922R Compliant

The ENGAGE™ tactical pistol grip (EPG16) provides a combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416 pistol grip. The finger swells are textured and the grooved backstraps provide a positive grip surface with wet or gloved hands. There is a secure watertight storage compartment with plug retention for one handed storage access. A customizable storage sled with quick access tab diminishes all rattle.

The ENGAGE™ tactical pistol grip (EPG47) provides a combination of fit and function unequaled by the originally supplied AK47 pistol grip. Textured finger swells and a grooved backstrap provide a positive grip surface with wet or gloved hands. There is a secure watertight storage compartment with plug retention for one handed storage access. A customizable storage sled with quick access tab diminishes all rattle.

KEY FEATURES:

KEY FEATURES:

EPG16 TECHNICAL SPECIFICATIONSWeight: 2.4ozHeight: 4.804”


RFG TECHNICAL SPECIFICATIONSWeight: 2.2ozHeight: 4.048”


TORCH™ STANDARD MOUNT

TORCH™ BACKUP LIGHT

Quick detach mount for illumination source or lasers

Large purchase pad for quick release

Accommodates 3/4” - .825” - 1” diameter light/laser

International shipments DO NOT require an export license, this item ships freely.

Power button can be set to momentary or constant onSet screw for Picatinny Rail mountingBattery door opens with quarter-turnPrimary LEDLow-output LEDTBLW-White /White LEDTBLWR- White /Red LEDTBLIR - IR/Red LED

The TORCH™ Standard Mount (TSM) accepts a 3/4, .825 or 1” illumination device. Two large purchase pads allow for tool free quick mounting or reconfiguration on a picatinny rail. This is the illumination mount you want if your objective is versatility for use with multi size lights, ease of movement,speed of reconfiguration, and the lowest profile possible.

The TORCH™ Backup Light is a low profile, Picatinny mounted, pressure pad activated light ideal for Home protection or as backup to a primary illumination source. Low output illumination for signature reduction during patrol, stealth structure search, approach to target, and breaching operations. 10 year storage lifespan, 12 hour burn time, 20 lumen output and weighing just 22 grams.

KEY FEATURES:

KEY FEATURES:

RQDG TECHNICAL SPECIFICATIONS



The TORCH™ mounts maximize mounting options for illumination devices and lasers, while providing a minimal profile. MADE IN THE USA.

TORCH™COLOR OPTIONS:

Camo Grey36170

Foliage Green34160


Scorched DarkEarth

18 19

TORCH™

MFT TAR TL5 PRO PERSONAL MARKEREvolutionary and advanced designs and manufacture is what Mission First Tactical is known for MFT projects often come from meeting the desires of the world’s Militaries, Law Enforcement, Special Forces and Emergency Rescue and Responders.

MFT proudly introduces its latest such project the TAR TL5 Pro. Designed for and deployed to Israeli forces the TL5 Pro meets the highest of needs and standards for field use.

Lives are protected by the choice of Visible Constant Light, IR Constant Light, Visible Beacon Flickering Light (white/Blue/Red) IR Beacon Flickering Light & Flashlight Mode – all in 4 varying intensity’s.

Powered by 1 CR123 or AA battery , Multiple Helmet Mounts, Vest Mount included

Invisibility: Unlike it’s competitors the TL5 pro IR mode is completely invisible to the naked eye.

The Marker is attached to the soldier’s side helmet with a universal clip

The personal universal clip allows the Marker to be transfered tothe weapon, vest, equipment bag, etc.

The universal clip allows the operator to change the position in addition to checking changing the battery without removing the helmet or putting the soldier at risk.

KEY FEATURES:

COLOR OPTIONS:

Fluorescent Yellow*

* available on quantity runs

Foliage Green34160

White* Scorched DarkEarth*

20 21

EVOLVE™

BATTLE STOCK ATTACHMENT

EVOLVE™ 2.2” PICATINNY RAIL

For standard and thickened heat shield

Compensated design allows fortrue alignment with barrel/bore

The E-VOLV™ (E2) Battle Stock Attachment (E2BSA) securely mounts to the standard collapsible stock with no modifications. The E2BSA provides a comfortable surface that allows an enhanced cheek weld and allows both standard and quick-detach sling mounting options. In addition, two watertight compartments provide silent and cushioned battery storage that eliminates the possibility of contact resulting in discharged batteries.

The E-VOLV™ (E2) E2PR2 Picatinny Rail is a Mil-Std 1913 rail attachment measuring just over 2 inches, manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division. It can be mounted to either standard or Glacier Guard handguards through the existing vent openings utilizing the included hardware. The rail is dimensioned to insure mounting is parallel to the bore/barrel for ballistic alignment. Made in USA and with a Lifetime Warranty.

Easily affixes to collapsible buttstock(may not work with non-standard models)

Upper section provides enhancedcheek weld

(2) watertight storage compartmentsthat separate batteries to prevent chargeoffs and reduce rattle

Quick Detach Sling mounting pointand sling slot

KEY FEATURES:

KEY FEATURES:

E2BSA TECHNICAL SPECIFICATIONSWeight: 4.96ozHeight: 3.193”


E2PR2 TECHNICAL SPECIFICATIONS


Width: .752”Length: 2.216”

The E-VOLV™ (E2) equipment series is the next generation of enhancements for original equipment, all battle tested in the harshest conditions and all PROUDLY MADE IN THE USA.

EVOLVE™COLOR OPTIONS:

Camo Grey36170

Foliage Green34160


Scorched DarkEarth

22 23

TEKKO™

AK47 INTEGRATED RAIL SYSTEM

Rigid polymer construction of this two piecehandguard provides a lightweight alternative to originalTwo full length Picatinny rails, upper and lower, allow individualized accessory mounting optionsTwo smaller side mounted Picatinny rails areideal for light/laser mounting and will not hinder natural grip

Simplified installation and unique attachmentensure a mounting system that will holdzero during extreme usageLower Picatinny rail cover offers original AK47 profile 922R Compliant

The TP47IRS is an integrated rail system that replaces the original handguards on the AK47 family of rifles. The lower section of the handguard is installed in the same manner as the original part, while the upper section is easily attached using the included (4) bolts. When installed the TP47IRS insures a stable, rattle-free platform that will not alter the zero capability of the optics chosen. Four MIL STD 1913 Picatinny rails, two full length upper/lower and two side rails at just over 2 inches, offer options for mounting Picatinny accessories such as optics, lights/lasers, vertical forward grips, bipods and other rail mounted equipment. The two smaller side rails are easily removed should usage be not be required. The included rail cover can be attached to the lower rail to maintain the original design profile. Made in the USA and is 922R Compliant.

KEY FEATURES:

TEKKO™ AK47 LOWER INTEGRATED RAIL SYSTEM

Rigid polymer construction of this two piecehandguard provides a lightweight alternative to originalA full length Picatinny lower rail allowsindividualized accessory mounting options

Two smaller side mounted Picatinny rails areideal for light/laser mounting and will not hinder natural gripLower Picatinny rail cover offers original AK47 profile922R Compliant

The TP47LIRS is an integrated rail system that replaces the original lower handguard on the AK47 family of rifles. The lower section of the handguard is installed in the same manner as the original part. 3 MIL STD 1913 Picatinny rails, one full length lower and two side rails at just over 2 inches, offer options for mounting Picatinny accessories such as lights/lasers, vertical forward grips, bipods and other rail mounted equipment. The two smaller side rails are easily removed should usage be not be required. The included rail cover can be attached to the lower rail to maintain the original design profile. Made in the USA and is 922R Compliant.KEY FEATURES:


TP47IRS TECHNICAL SPECIFICATIONSWidth: 2.451”Length: 6.396”

TP47LIRS TECHNICAL SPECIFICATIONSWeight: 5.4ozHeight: 1.969”


The TEKKO™ integrated rail systems allow customized mountingoptions for mission specific accessories not possible with originalhandguards, whether for AK47 or AR15. An evolution in battlefield technology manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division or hard coat anodized 6061 Aluminum. MADE IN THE USA.

TEKKO™COLOR OPTIONS:

Camo Grey36170

Foliage Green34160


Scorched DarkEarth

24 25

TMARCFF27IRS TECHNICAL SPECIFICATIONSWeight: 13ozHeight: 2.42”


TMARCFF210IRS TECHNICAL SPECIFICATIONSWeight: 17ozHeight: 2.42”


TEKKO™ T-MARCFREE FLOAT 2 PIECE INTEGRATED RAIL SYSTEMThe TEKKO™ Metal AR15 Carbine 7” Free Float 2 Piece Integrated Rail System (TMARCFF27IRS) replaces the plastic factory handguard in minutes and requires no gunsmithing, removal of Delta Ring is required. Four MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. A monolithic style continuous top rail eliminates the gap between the receiver and rail. There are four QD mounts, two on each side for push button sling swivels. The 7” lightweight 6061 aluminum construction is hard coat anodized, made in the USA, with a Lifetime Warranty.

KEY FEATURES:

TEKKO™ T-MARCFREE FLOAT 2 PIECE INTEGRATED RAIL SYSTEMThe TEKKO™ Metal AR15 Carbine 10” Free Float 2 Piece Integrated Rail System (TMARCFF210IRS) replaces the plastic factory handguard in minutes and requires no gunsmithing, removal of Delta Ring is required. Four MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. A monolithic style continuous top rail eliminates the gap between the receiver and rail. There are four QD mounts, two on each side for push button sling swivels. The 10” lightweight 6061 aluminum construction is hard coat anodized, made in the USA, with a Lifetime Warranty.

KEY FEATURES:

Quick Installation, no gunsmithing, removal of Delta Ring is required.

4 MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories

Quick Installation, no gunsmithing, removal of Delta Ring is required.


4 QD mounts, two on each side for push button sling swivels

Monolithic style continuous top rail

Lightweight 6061 aluminum construction is hard coat anodized




No Gunsmithing, drop in screwless installation, held in place by Delta ring and handgaurd cap with no permanent alterations to rifle


No Gunsmithing, drop in screwless installation, held in place by Delta ring and handgaurd cap with no permanent alterations to rifle4 MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories




4 QD mounts, two on each side for push button sling swivelsMonolithic style continuous top railLightweight 6061 aluminum construction is hard coat anodized

KEY FEATURES:

KEY FEATURES:

TEKKO™ T-MARCINTEGRATED RAIL SYSTEM

TEKKO™ T-MARC MIDLENGTHINTEGRATED RAIL SYSTEM

The TEKKO™ Metal AR Carbine Integrated Rail System (TMARCIRS) replaces the plastic factory handguard in minutes and requires no gunsmithing. No permanent alterations need to be made to the rifle, its a drop in screw less installation, the unit is held in place by the Delta ring and handguard cap. Four MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. A monolithic style continuous top rail eliminates the gap between the receiver and rail. There are four QD mounts, two on each side for push button sling swivels. The 7” lightweight 6061 aluminum construction is hard coat anodized, made in the USA, with a Lifetime Warranty.

The TEKKO™ Metal AR Midlength Integrated Rail System (TMARMIRS) replaces the plastic factory handguard in minutes and requires no gunsmithing. No permanent alterations need to be made to the rifle, its a drop in screw less installation, the unit is held in place by the Delta ring and handguard cap. Four MIL-STD 1913 Picatinny Rails provide a secure platform for mounting Picatinny accessories such as vertical grips, lights, lasers, bipods and other rail mounted kit. A monolithic style continuous top rail eliminates the gap between the receiver and rail. There are four QD mounts, two on each side for push button sling swivels. The 9” lightweight 6061 aluminum construction is hard coat anodized, made in the USA, with a Lifetime Warranty.


Weight: 12ozHeight: 2.42”

TMARCIRS TECHNICAL SPECIFICATIONSWidth: 2.29”Length: 7.25”

TMARMIRS TECHNICAL SPECIFICATIONSWidth: 2.29”Length: 9.25”

26 27

MFT SIGHTS™

REAR BACK UP POLYMER

MFT SIGHTS™

FRONT BACK UP POLYMER SIGHT

Full Elevation adjustmentLow profile snag resistant designShroud protects aperture from debris and impact damage Dual peep, same plane aperture allows for perfect co-witnessUnique closure with either aperture deployed

Can fold to the rear, the correct direction if dropped Sight works in conjunction with all standard height front sights Manufactured out of super tough polyamide from DuPont’s Military Plastic Division

The Back Up Polymer Flip Up Rear Sight with Windage Adjustment (BUPSWR) mounts onto a 1913 Picatinny rail. A flat head screw driver is required to adjust an Infinite MOA. Unlike other backup sights MFT has developed a shroud that shelters the aperture from debris and impact damage when not deployed. A slim profile allows the sight to sit under all current magnifiers and optics. Manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division, MADE IN THE USA.

The Back Up Polymer Flip up Front Sight with standard iron sight elevation adjustment (BUPSWF) mounts onto a 1913 Picatinny rail and accepts any standard front post blade. A standard front sight tool is required with each click equaling the standard 1/4 MOA. Unlike other backup sights MFT has developed a shroud that shelters the front post blade from debris and impact damage when not deployed. A slim profile allows the sight to sit under most optics. Manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division, MADE IN THE USA.

KEY FEATURES:

KEY FEATURES:

BUPSWR TECHNICAL SPECIFICATIONS

BUPSWF TECHNICAL SPECIFICATIONSWeight: .5 ozHeight: .879”O.A. /.6” from top of Rail


MFT SIGHTS™

REAR BACK UP FLIP UP POLYMER SIGHT

Full Elevation adjustmentLow profile snag resistant designShroud protects aperture from debris and impact damage Dual peep, same plane aperture allows for perfect co-witnessUnique closure with either aperture deployed

Can fold to the rear, the correct direction if dropped Sight works in conjunction with all standard height front sights Manufactured out of super tough polyamide from DuPont’s Military Plastic Division

The Back Up Polymer Flip Up Sight with Windage and Elevation Adjustment Wheel (BUPSWER) mounts onto a 1913 Picatinny rail. Full elevation adjustment is achieved without a tool utilizing a thumb wheel; a flat head screw driver is required to adjust an infinite windage MOA. Unlike other backup sights MFT has developed a shroud that shelters the aperture from debris and impact damage when not deployed. A slim profile allows the sight to sit under all current magnifiers and optics. Manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division, MADE IN THE USA.

KEY FEATURES:

BUPSWER TECHNICAL SPECIFICATIONSWeight: .8 ozHeight: .879” O.A. /.6” from top of Rail


Sighting solutions mount onto a 1913 Picatinny rail replacing the carry handle sight. Designed for AR-15 - M4 Flat Top configured rifles, will work with other similarly configured rifles.

MFT SIGHTS™ COLOR OPTIONS:

Camo Grey36170

Foliage Green34160


Scorched DarkEarth

28 29

Weight: .5 ozHeight: .879”O.A. /.6” from top of Rail


Full Elevation adjustment, tool required

Low profile snag resistant design

Shroud protects front post blade from debris and impact damage

Accepts any standard front post blade

Can fold to the rear, the correct direction if dropped

Manufactured out of super tough polyamide from DuPont’s Military Plastic Division

Magazines over engineered for today’s modern warrior, utilizing DuPont’s Military Plastic Division super tough polyamide.

MFT MAGAZINE™COLOR OPTIONS:

Camo Grey36170

Foliage Green34160


Scorched DarkEarth

MFT MAGAZINE™

MFT stipple texture

Low profile ribs front texture

Tool-less disassembly with double floor plate safety release tabs

Paint Pen dot matrix on floor plate

Long-life stainless steel spring

Four-way anti-tilt follower

Flared floor plate

Oversized bolt catch

Available in 3 Pack (SCPM5563PAK)

MFT Standard Capacity Polymer Magazine, 30 round AR15 5.56x45mm, .223 Rem, .300 AAC (SCPM556) designed for the AR15/M4 but allows for use with a wide range of non AR 15 M4 platforms such as the HK® 416 and MR556A1, M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others. The MFT stipple texture and low profile front ribs aid in extraction and handling of magazine. A flared floor plate aids in extraction and handling while providing drop protection and is compatible with tight double and triple magazine pouches. Simple tool-less disassembly with double floor plate safety release tabs ensures against AD. The floor plate has a paint pen dot matrix area for easy identification marking. Oversized bolt catch notch in the rear of the magazine provides increased bolt catch clearance. Long-life stainless steel spring and four-way anti-tilt follower included ensuring reliable feeding. Manufactured using a specially developed reinforced, super tough polyamide from DuPont’s Military Plastic Division, MADE IN THE USA.

KEY FEATURES:

30 31

SCPM556 TECHNICAL SPECIFICATIONSWeight: 3.8ozHeight: .930”


The MFT Classic™ series features an assortment of accessories with at least a decade of combat proven performance and durability. From simple designs coupled with MFT’s new polymer blend, these classics will be around for a very long time.

MFT CLASSIC™COLOR OPTIONS:

Camo Grey36170

Foliage Green34160


Scorched DarkEarth

MFT CLASSIC™

G27 TACTICAL PISTOL GRIP

MFT CLASSIC™

VG1 QUICK DETACH VERTICAL GRIP

Increases operator comfort andweapon performance, providing morecontrol during firing while reducing fatigue

Finger grooves, palm swell and contouredbackstrap allow for a powerful grip

Textured surface area allows for asecure grip when in use or when wet

Grip base offers an easily accessiblesecured storage compartment fora small cleaning kit or other items

Quick push button detach

Simple installation

Easily accessible storage compartmentfor a small cleaning kit or other items


The MFT Classic™ G27 Tactical pistol grip for M16/AR15, replaces standard grip in minutes.

The MFT Classic™ Quick detach combat grip attaches and detaches with the push of a button. Simply push and slide along rail to desired location. Incorporates a secured storage compartment for batteries or small items.

KEY FEATURES:

KEY FEATURES:

G27 TECHNICAL SPECIFICATIONSWeight: 3.4ozHeight: 4.991”


VG1 TECHNICAL SPECIFICATIONSWeight: 3.4ozHeight: 4.5”


32 33

MFT CLASSIC™

BP1 UNIVERSALEQUIPMENT MOUNT

Rapidly employ previously attached bipod

Quick detach/attach push button

High Density Polymer*Bipod NOT Included


The MFT Classic™ Equipment mount allows the operator to rapidly employ a bipod that has been previously attached. Quick detach push button allows for easy and fast attachment and removal. Mount on side of a Picatinny rail for use as a side sling adapter. Constructed from high density polymer, Sling adapter constructed from steel.

KEY FEATURES: VG1 TECHNICAL SPECIFICATIONSWeight: 1.9ozHeight: 1.2”


MFT CLASSIC™

AK47 MAGAZINE COUPLER

High density reinforced polymer construction

Screw tightened

The MFT Classic™ AK47 Magazine coupler expands ammunition capacity and saves precious reloading time by joining two magazines for the AK47. Will not scratch or deform magazines.

KEY FEATURES: AK47MC TECHNICAL SPECIFICATIONS



MFT CLASSIC™

M16 MAGAZINE COUPLER

Fits .223, 5.56 NATO, AR15/M16,

Ruger Mini-14 and Magpul™ P-MAGS

Manufactured from high density polymer

Will not scratch or deform magazines


The MFT Classic™ M16 magazine coupler (M16MC) joins two M16 style magazines, expanding ammunition capacity and allowing faster reload time. Patented.

KEY FEATURES: M16MC TECHNICAL SPECIFICATIONSWeight: 1.4ozHeight: 2.25”

Width: 2.375”Length: 3.0”OPSM TECHNICAL SPECIFICATIONS



MFT CLASSIC™

OPSM ONE POINT SLING MOUNTThe MFT Classic™ one point sling mount (OPSM) is a single point sling mount for snap clips or conventional sling up to 1.25” webbing. No tube disassembly necessary; remove collapsible buttstock, slide on tube, position properly and secure. CNC machined from Aviation Grade aluminum with matte black finish.

KEY FEATURES:Single Point Mount

No tube disassembly required

CNC machined from Aviation Gradealuminum with matte black finish.

34 35

MFT CLASSIC™

M33 2 RAIL HANDGUARD

MFT CLASSIC™

M44S/M44L 4 RAIL HANDGUARD

Screwless installation

Held in place by Delta ring and handguard cap

Constructed of high density polymer

Stainless steel heat shieldsdissipate high heat from rapid fire

Rail covers included

Screwless installation

Held in place by Delta ring and handguard cap

Thermal rail covers included

Constructed of high-density polymer

M44S is for 6” carbine handguard replacement

M44L is for 12” rifle handguard replacement

The MFT Classic™ M33 2 rail Polymer two piece handguard provides a two sidedPicatinny rail system. Handguard can be mounted so the rails are in a horizontal or vertical position. Patented.

The MFT Classic™ M44S and M44L Polymer two-piece handguard provides afour sided Picatinny rail system for AR15/M16/M4. Patented

KEY FEATURES:

KEY FEATURES:

M33 TECHNICAL SPECIFICATIONSWeight: 5.4ozHeight: 2.425”


M44S TECHNICAL SPECIFICATIONSWeight: 7.4ozHeight: 2.25”


M44L TECHNICAL SPECIFICATIONSWeight: 13.6ozHeight: 2.39”

Width: 2.224”Length: 12”

MFT CLASSIC™

OPS1 ONE POINT SLING

Strong metal carabiner for easy attachment

Sling easily snaps onto many mounting locations

Fully adjustable sling fits all body sizes

Quick release side buckle

Constructed from 1.5” nylon web

High density bungee cord and carabiner arecolored black

The MFT Classic™ one point sling (OPS1) is ideal for close quarters combat, allowing easy movement when operating inside confined spaces. Maintains its structure for easy donning. OPS1 has upgraded tubular webbing with fully enclosed bungee portion, allowing for increased durability.

KEY FEATURES:

MFT CLASSIC™

FAS2/3 QUICK DETACH LIGHT MOUNT

Quickly attaches/detaches to Picatinny railutilizing a one finger push button.

Polymer light mount allows operator readyaccess to illumination source.


The MFT Classic™ FAS2/3 quick detach light mount quickly attaches/detaches to Picatinny rail utilizing a one finger push button. Polymer light mount allows operator ready access to illumination source.

KEY FEATURES:

OPS1 TECHNICAL SPECIFICATIONSWeight: 7.3ozHeight: 26.425”

Width: 2.137”Length: 33.275”

FAS2/3 TECHNICAL SPECIFICATIONSWeight: 1.2ozHeight: 1.738”


36 37

The Mission First Tactical Lifestyle apparel, patches and stickers are Designed for Tactical Badass’s, Customizable for looking killer at the range and to show those who question what your all about that you are one of MFT’s Team of badass’s!

MFT LIFESTYLE LIFESTYLE ASSORTED TEAM SHIRTS

LIFESTYLE MORALE PATCHES

LIFESTYLE STICKERS

Designed for Badass’sRule #2: We don’t talk about being Badass’s Tactically covers your “ripped” abs and or kegsized abs! Customizable for looking killer at the range#5000 Gildan Heavyweight 100% Cotton

Designed for Badass’sIntended for use by Badass’s and those they may also consider bad ass.2 Inch Circular3” x 2” Multicam4” x 2.25” Full Color

Designed for Badass’sBlack sticker with rifle silhouette and quote 4” x 3”White sticker with rifle silhouette and MOLON LABE 3” x 2”Die cut rifle silhouette 5” x 3”

The Mission First Tactical Lifestyle assorted team shirts have an incredibly long name for nothing more then killer t-shirt! These shirts feature our American Pride across the front with our Team MF’er HK416 across the back or our MFT Crest just to show those who question what your all about that you are one of MFT’s Team of badass’s!

The Mission First Tactical Morale Patches are “Officially” Termed as “Unofficial patches that are used by a unit. Morale patches may be, but are not necessarily, approved. Such patches are designed to raise the “morale” of the unit, thus the origins of the term.” Truth is, we want our team MFer’s out there rocking some Kick Ass Patches!

The Mission First Tactical stickers are intended to intimidate and shock your friends and family!!! Just kidding, they’re vinyl stickers to show your love for MFT, and for being a badass!

KEY FEATURES:

KEY FEATURES:

KEY FEATURES:

Colors: Black, White and BlackSizes: S,M,L,XL, XXL, XXXL

TECHNICAL SPECIFICATIONS

PROUDLY MADE IN THE UNITED STATES OF AMERICA

38 39

2014 MISSION FIRST TACTICAL 780 HAUNTED LANE BENSALEM, PA 19020 TEL 267 803 1517 FAX 267 803 1002 MISSIONFIRSTTACTICAL.COM

Documents

Mission First Tactical Catalog 2014