Miscellaneous Products - Hydraulic Supply Company€¦ · Seals Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information

Miscellaneous Products

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product.

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &

Technical Information

Category Page

1331 1999-2016 Hydraulic Supply Co. • 1-800-507-9651 • www.hydraulic-supply.com

Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1332Felsted Control Cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1361Salami Cable Remote Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1375Thread Sealants. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1376Allied Witan Filter Vents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1378Denso Petrolatum Tape (Corrosion Protection) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1379Boeshield® T-9 Corrosion Shield. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1379Anti-Seize Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1380SCRUBS in-a-Bucket® Hand Cleaner Towels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1380Conbraco Y Strainers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1381Hub City Splined Billets, Hubs, Reducers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1382Dill® Tire Service Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1382Hose Nozzles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1383Textbooks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1383Boss® Gloves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1384Channellock Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1384Houston Pneumatic Vibrators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1385Cable (Wire) Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1385Hannay Hose Reels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1386Pressure Washer Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1387Rawson Koenig Hydraulic Worm Gear Winches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1389Kawasaki / Lantec Peel Press Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1390Fluids: Hydraulic, Transmission, Gear Lube, Engine Oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1391CRC Chemical Maintenance Products . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1398Lubrication Equipment & Accessories (Alemite, Lumax) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1402

This page is part of a complete catalog which contains technical and safety data that must be reviewed when selecting a product

SealsCategory Page


Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion

Inch SizesU-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1333Piston Cups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1335Vee Packing Sets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1335Wear Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1336Piston T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1336Piston Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1337Rod T-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1337Wiper Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1337Quad Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1340Caterpillar D-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1340Piston Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1341O-Rings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1346Back-Up Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1352Retainer Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1354Self Aligning Bearings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1354

Metric SizesMetric U-Seals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1355

Assortment Kits & ToolsAssortment Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1356

Cylinder Kits & PartsCylinder Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1360


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Homogeneous Buna-N U-Seals

Style HRU u-seals are precision molded from 80 Durometer Buna-N rubber. Sizes include those found in Army-Navy spec. AN6226 and narrow cross-section sizes found in JIC cylinders and the popularly termed "Huva Cup". EP suffix signifies Ethylene Propylene. V suffix signifies Fluorocarbon.

Material: 80 Durometer Rubber. Temperature Range: -40°F to 250°F. Pressure Range: 0 to 1,000 PSI.

Homogeneous Buna-N U-Seals

Catalog Part No.

Model Number

Cross Sect. (in)

I.D. (in)

O.D. (in)

Ht H (in) Wt.

Price Each

•C1CY65 HRU15-1.18-15 5/32 1-3/16 1-1/2 5/32 0.01

Polyurethane U-Seals

Molded from tough, abrasion resistant polyurethane. The four lobed expander ring energizes the sealing tips, even at zero pressure, to help prevent "weeping" when the system is idle. Items with N suffix are made from 90 Durometer Nitrile. Items with V suffix are made from Fluorocarbon.

Material: Urethane. Temperature Range: -65°F to 220°F. Pressure Range: 0 to 5,000 PSI. Standard Type: Height & cross section are equal. Deep Type: Height is greater than cross section. Type SQB: Height & cross section are equal. Beveled

lip design provides superior film breaking. Type B: Height is greater than cross section. Beveled

lip design provides superior film breaking.


Catalog Part No.

Model Number

Cross Sect. (in)

I.D. (in)

O.D. (in)

Ht H (in) Wt.

Price Each

•C1DM70 U12-0.18-25B 1/8 3/16 7/16 1/4 0.20

•C1DM72 U12-0.25-SQB 1/8 1/4 1/2 1/8 0.05

•C1DM71 U12-0.25-25B 1/8 1/4 1/2 1/4 0.01

•C1DM74 U12-0.31-SQB 1/8 5/16 9/16 1/8 0.10

•C1DM73 U12-0.31-25B 1/8 5/16 9/16 1/4 0.20

•C1DM75 U12-0.37 1/8 3/8 5/8 1/8 0.01

•C1DM77 U12-0.50-SQB 1/8 1/2 3/4 1/8 0.15

•C1DM76 U12-0.50-25B 1/8 1/2 3/4 1/4 0.30

•C1DM78 U12-0.56 1/8 5/8 15/16 1/8 0.01

•C1DM80 U12-0.62-SQB 1/8 5/8 7/8 1/8 0.01

•C1DM79 U12-0.62-25B 1/8 5/8 7/8 1/4 0.01

•C1DM81 U12-0.68 1/8 11/16 15/16 1/8 0.02

•C1DM85 U12-0.75-SQB 1/8 3/4 1 1/8 0.02

•C1DM83 U12-0.75-18B 1/8 3/4 1 3/16 0.15

•C1DM84 U12-0.75-25B 1/8 3/4 1 1/4 0.01

•C1DM86 U12-0.81 1/8 13/16 1-1/16 1/8 0.01

•C1DM88 U12-0.87-SQB 1/8 7/8 1-1/8 1/8 0.15

•C1DM87 U12-0.87-25B 1/8 7/8 1-1/8 1/4 0.01

•C1DM91 U12-1.00-SQB 1/8 1 1-1/4 1/8 0.01

•C1DM89 U12-1.00-18B 1/8 1 1-1/4 3/16 0.20

•C1DM90 U12-1.00-25B 1/8 1 1-1/4 1/4 0.25

•C1DM92 U12-1.06-SQB 1/8 1-1/16 1-5/16 1/8 0.10

•C1DM94 U12-1.12-SQB 1/8 1-1/16 1-3/8 1/8 0.25

•C1DM93 U12-1.12-25B 1/8 1-1/16 1-3/8 1/4 0.05

•C1DM95 U12-1.18 1/8 1-3/16 1-7/16 1/8 0.25

•C1DM96 U12-1.18-18B 1/8 1-3/16 1-7/16 3/16 0.15

•C1DM97 U12-1.18-25B 1/8 1-3/16 1-7/16 1/4 0.20

•C1DN11 U12-1.25-SQB 1/8 1-1/4 1-1/2 1/8 0.20

•C1DM98 U12-1.25-18B 1/8 1-1/4 1-1/2 3/16 0.01

•C1DM99 U12-1.25-25B 1/8 1-1/4 1-1/2 1/4 0.10

•C1DN14 U12-1.37-SQB 1/8 1-3/8 1-5/8 1/8 0.01

•C1DN13 U12-1.37-25B 1/8 1-3/8 1-5/8 1/4 0.01

•C1DN16 U12-1.50-SQB 1/8 1-1/2 1-3/4 1/8 0.10

•C1DN15 U12-1.50-25B 1/8 1-1/2 1-3/4 1/4 0.01

•C1DN17 U12-1.62-SQB 1/8 1-5/8 1-7/8 1/8 0.01

•C1DN19 U12-1.75-SQB 1/8 1-3/4 2 1/8 0.01

•C1DN20 U12-2.00 1/8 2 2-1/4 1/8 0.01

•C1DN21 U12-2.25 1/8 2-1/4 2-1/2 1/8 0.15

•C1DN24 U12-2.75 1/8 2-3/4 3 1/8 0.01

•C1HH21 U15-1.18 5/32 1-3/16 1-1/2 5/32 0.20

•C1HH22 U15-1.25 5/32 1-1/4 1-9/16 5/32 0.01

•C1HH23 U15-1.37 5/32 1-3/8 1-11/16 5/32 0.05

•C1DN26 U18-0.50 3/16 1/2 7/8 3/16 0.01

•C1DN27 U18-0.62-SQB 3/16 5/8 1 3/16 0.10

•C1ZX37 U18-0.62-31B 3/16 5/8 1 5/16 0.10

•C1DN29 U18-0.75-SQB 3/16 3/4 1-1/8 3/16 0.01

•C1DN28 U18-0.75-31B 3/16 3/4 1-1/8 5/16 0.15

•C1DN31 U18-0.87-SQB 3/16 7/8 1-1/4 3/16 0.01

•C1DN30 U18-0.87-31B 3/16 7/8 1-1/4 5/16 0.01

•C1DN35 U18-1.00-SQB 3/16 1 1-3/8 3/16 0.25

•C1DN32 U18-1.00-25B 3/16 1 1-3/8 1/4 0.01

•C1DN33 U18-1.00-31B 3/16 1 1-3/8 5/16 0.05

•C1DN34 U18-1.00-37B 3/16 1 1-3/8 3/8 0.25

Inch Sizes


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


•C1DN37 U18-1.12-SQB 3/16 1-1/16 1-1/2 3/16 0.01

•C1DN36 U18-1.12-25B 3/16 1-1/16 1-1/2 1/4 0.15

•C1ER50 U18-1.12-31B 3/16 1-1/16 1-1/2 5/16 0.01

•C1DN38 U18-1.18 3/16 1-3/16 1-9/16 3/16 0.20

•C1DN42 U18-1.25-SQB 3/16 1-1/4 1-5/8 3/16 0.20

•C1DN39 U18-1.25-25B 3/16 1-1/4 1-5/8 1/4 0.10

•C1DN40 U18-1.25-31B 3/16 1-1/4 1-5/8 5/16 0.01

•C1DN41 U18-1.25-37B 3/16 1-1/4 1-5/8 3/8 0.35

•C1DN46 U18-1.37-SQB 3/16 1-3/8 1-3/4 3/16 0.05

•C1DN43 U18-1.37-25B 3/16 1-3/8 1-3/4 1/4 0.04

•C1DN44 U18-1.37-31B 3/16 1-3/8 1-3/4 5/16 0.01

•C1DN45 U18-1.37-37B 3/16 1-3/8 1-3/4 3/8 0.05

•C1DN50 U18-1.50-SQB 3/16 1-1/2 1-7/8 3/16 0.10

•C1DN47 U18-1.50-25B 3/16 1-1/2 1-7/8 1/4 0.01

•C1DN48 U18-1.50-31B 3/16 1-1/2 1-7/8 5/16 0.01

•C1DN49 U18-1.50-37B 3/16 1-1/2 1-7/8 3/8 0.01

•C1DN51 U18-1.62 3/16 1-5/8 2 3/16 0.01

•C1ER51 U18-1.62-SQB 3/16 1-5/8 2 3/16 0.02

•C1DN52 U18-1.62-25B 3/16 1-5/8 2 1/4 0.05

•C1DN53 U18-1.62-31B 3/16 1-5/8 2 5/16 0.35

•C1DN54 U18-1.62-37B 3/16 1-5/8 2 3/8 0.30

•C1DN58 U18-1.75-SQB 3/16 1-3/4 2-1/8 3/16 0.15

•C1DN55 U18-1.75-25B 3/16 1-3/4 2-1/8 1/4 0.40

•C1DN56 U18-1.75-31B 3/16 1-3/4 2-1/8 5/16 0.15

•C1DN57 U18-1.75-37B 3/16 1-3/4 2-1/8 3/8 0.03

•C1DN60 U18-1.87-SQB 3/16 1-7/8 2-1/4 3/16 0.35

•C1DN59 U18-1.87-37B 3/16 1-7/8 2-1/4 3/8 0.25

•C1DN63 U18-2.00-SQB 3/16 2 2-3/8 3/16 1.50

•C1DN61 U18-2.00-31B 3/16 2 2-3/8 5/16 0.01

•C1DN62 U18-2.00-37B 3/16 2 2-3/8 3/8 0.20

•C1DN65 U18-2.12-SQB 3/16 2-1/8 2-1/2 3/16 0.01

•C1DN64 U18-2.12-25B 3/16 2-1/8 2-1/2 1/4 0.02

•C1DN68 U18-2.25-SQB 3/16 2-1/4 2-5/8 3/16 0.23

•C1DN67 U18-2.25-37B 3/16 2-1/4 2-5/8 3/8 0.01

•C1DN69 U18-2.37-SQB 3/16 2-3/8 2-3/4 3/16 0.05

•C1DN73 U18-2.50-SQB 3/16 2-1/2 2-7/8 3/16 0.01

•C1DN70 U18-2.50-25B 3/16 2-1/2 2-7/8 1/4 0.02

•C1DN71 U18-2.50-31B 3/16 2-1/2 2-7/8 5/16 0.30

•C1DN72 U18-2.50-37B 3/16 2-1/2 2-7/8 3/8 0.30

•C1DN75 U18-2.62-SQB 3/16 2-5/8 3 3/16 0.01

•C1DN74 U18-2.62-37B 3/16 2-5/8 3 3/8 0.20

•C1DN77 U18-2.75-SQB 3/16 2-3/4 3-1/8 3/16 0.01

•C1DN76 U18-2.75-37B 3/16 2-3/4 3-1/8 3/8 0.25

•C1DN78 U18-2.87 3/16 2-7/8 3-1/4 3/16 0.10

•C1DN79 U18-3.00 3/16 3 3-3/8 3/16 0.02

•C1DN80 U18-3.00-37B 3/16 3 3-3/8 3/8 0.01

•C1DN82 U18-3.12-SQB 3/16 3-1/8 3-1/2 3/16 0.01

•C1DN81 U18-3.12-37B 3/16 3-1/8 3-1/2 3/8 0.03

•C1DN86 U18-3.50-37B 3/16 3-1/2 3-7/8 3/8 0.40

•C1DN89 U18-3.62-SQB 3/16 3-5/8 4 3/16 0.01

•C1DN88 U18-3.62-37B 3/16 3-5/8 4 3/8 0.55

•C1DN92 U18-4.00-37B 3/16 4 4-3/8 3/8 0.04

•C1DN94 U25-0.75 1/4 3/4 1-1/4 1/4 0.01


Catalog Part No.

Model Number

Cross Sect. (in)

I.D. (in)

O.D. (in)

Ht H (in) Wt.

Price Each

•C1DN96 U25-0.93 1/4 13/16 1-7/16 1/4 0.01

•C1DN98 U25-1.00-SQB 1/4 1 1-1/2 1/4 0.01

•C1DN97 U25-1.00-37B 1/4 1 1-1/2 3/8 0.10

•C1DN99 U25-1.12 1/4 1-1/16 1-5/8 1/4 0.05

•C1DP11 U25-1.12-37B 1/4 1-1/16 1-5/8 3/8 0.01

•C1DP12 U25-1.18 1/4 1-3/16 1-11/16 1/4 0.01

•C1DP14 U25-1.25-SQB 1/4 1-1/4 1-3/4 1/4 0.10

•C1DP13 U25-1.25-37B 1/4 1-1/4 1-3/4 3/8 0.02

•C1DP15 U25-1.37 1/4 1-3/8 1-7/8 1/4 0.25

•C1DP16 U25-1.37-37B 1/4 1-3/8 1-7/8 3/8 0.05

•C1DP19 U25-1.50-SQB 1/4 1-1/2 2 1/4 0.10

•C1DP17 U25-1.50-31B 1/4 1-1/2 2 5/16 0.50

•C1DP18 U25-1.50-37B 1/4 1-1/2 2 3/8 0.05

•C1DP22 U25-1.75 1/4 1-3/4 2-1/4 1/4 0.10

•C1DP23 U25-1.75-37B 1/4 1-3/4 2-1/4 3/8 0.02

•C1DP25 U25-1.87-37B 1/4 1-7/8 2-3/8 3/8 0.25

•C1DP28 U25-2.00-SQB 1/4 2 2-1/2 1/4 0.10

•C1DP26 U25-2.00-31B 1/4 2 2-1/2 5/16 0.03

•C1DP27 U25-2.00-37B 1/4 2 2-1/2 3/8 0.10

•C1DP30 U25-2.12-37B 1/4 2-1/8 2-5/8 3/8 0.01

•C1DP31 U25-2.25 1/4 2-1/4 2-3/4 1/4 0.02

•C1DP32 U25-2.25-37B 1/4 2-1/4 2-3/4 3/8 0.03

•C1DP34 U25-2.37-37B 1/4 2-3/8 2-7/8 3/8 0.45

•C1DP37 U25-2.50-SQB 1/4 2-1/2 3 1/4 0.15

•C1DP35 U25-2.50-37B 1/4 2-1/2 3 3/8 0.01

•C1DP39 U25-2.62-37B 1/4 2-5/8 3-1/8 3/8 0.07

•C1DP41 U25-2.75-SQB 1/4 2-3/4 3-1/4 1/4 0.02

•C1DP40 U25-2.75-37B 1/4 2-3/4 3-1/4 3/8 0.05

•C1DP42 U25-3.00 1/4 3 3-1/2 1/4 0.15

•C1DP43 U25-3.00-37B 1/4 3 3-1/2 3/8 0.04

•C1DP46 U25-3.25-37B 1/4 3-1/4 3-3/4 3/8 0.05

•C1DP50 U25-3.50-SQB 1/4 3-1/2 4 1/4 0.01

•C1DP48 U25-3.50 1/4 3-1/2 4 1/4 0.02

•C1DP49 U25-3.50-37B 1/4 3-1/2 4 3/8 0.05

•C1DP52 U25-3.75-SQB 1/4 3-3/4 4-1/4 1/4 0.25

•C1KN66 U25-3.75-37B 1/4 3-3/4 4-1/4 3/8 0.04

•C1DP56 U25-4.00-SQB 1/4 4 4-1/2 1/4 0.04

•C1DP53 U25-4.00-37B 1/4 4 4-1/2 3/8 0.05

•C1DP54 U25-4.00-50D 1/4 4 4-1/2 1/2 0.65

•C1DP55 U25-4.00-56B 1/4 4 4-1/2 9/16 0.55

•C1DP60 U25-4.50 1/4 4-1/2 5 1/4 0.10

•C1DP61 U25-4.50-37B 1/4 4-1/2 5 3/8 0.15

•C1DP63 U25-4.50-56B 1/4 4-1/2 5 9/16 0.09

•C1DP64 U25-4.50-62B 1/4 4-1/2 5 5/8 1.10

•C1DP68 U25-5.00 1/4 5 5-1/2 1/4 0.05

•C1DP69 U25-5.00-37B 1/4 5 5-1/2 3/8 0.10

•C1DP73 U25-5.50 1/4 5-1/2 6 1/4 0.01

•C1DP74 U25-5.50-37B 1/4 5-1/2 6 3/8 0.01

•C1DP75 U25-5.50-56B 1/4 5-1/2 6 9/16 0.25

•C1DP85 U31-1.00-50B 5/16 1 1-5/8 1/2 0.05

•C1DP87 U31-1.25 5/16 1-1/4 1-7/8 5/16 0.45

•C1DP88 U31-1.25-37B 5/16 1-1/4 1-7/8 3/8 0.50

•C1DP91 U31-1.37-SQB 5/16 1-3/8 2 5/16 0.02


Catalog Part No.

Model Number

Cross Sect. (in)

I.D. (in)

O.D. (in)

Ht H (in) Wt.

Price Each

Inch Sizes


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



•C1DP90 U31-1.37-37B 5/16 1-3/8 2 3/8 0.50

•C1DP92 U31-1.50 5/16 1-1/2 2-1/8 5/16 0.10

•C1DP97 U31-1.75-37B 5/16 1-3/4 2-3/8 3/8 0.02

•C1DP98 U31-1.87 5/16 1-7/8 2-1/2 5/16 0.03

•C1DP99 U31-2.00 5/16 2 2-5/8 5/16 0.30

•C1DQ11 U31-2.00-50B 5/16 2 2-5/8 1/2 0.01

•C1DQ14 U31-2.25-50B 5/16 2-1/4 2-7/8 1/2 0.05

•C1DQ15 U31-2.37 5/16 2-3/8 3 5/16 0.06

•C1DQ16 U31-2.50 5/16 2-1/2 3-1/8 5/16 0.10

•C1DQ17 U31-2.50-50B 5/16 2-1/2 3-1/8 1/2 0.04

•C1DQ19 U31-2.75 5/16 2-3/4 3-3/8 5/16 0.05

•C1DQ20 U31-2.75-50B 5/16 2-3/4 3-3/8 1/2 0.01

•C1DQ21 U31-2.87 5/16 2-7/8 3-1/2 5/16 0.05

•C1DQ24 U31-3.00-50B 5/16 3 3-5/8 1/2 0.07

•C1DQ26 U31-3.37-50B 5/16 3-3/8 4 1/2 0.01

•C1DQ32 U31-4.00 5/16 4 4-5/8 5/16 0.05

•C1GK82 U31-4.00-56B 5/16 4 4-5/8 9/16 0.09

C1ER52 U31-4.37 5/16 4-3/8 5 5/16 0.10

•C1DQ35 U31-4.50 5/16 4-1/2 5-1/8 5/16 0.05

•C1DQ40 U37-1.25 3/8 1-1/4 2 3/8 0.10

•C1DQ45 U37-1.75 3/8 1-3/4 2-1/2 3/8 0.15

•C1DQ51 U37-2.50-50B 3/8 2-1/2 3-1/4 1/2 0.01

•C1DQ54 U37-2.75 3/8 2-3/4 3-1/2 3/8 0.10

•C1DQ56 U37-3.00-SQB 3/8 3 3-3/4 3/8 0.07

•C1DQ58 U37-3.25-50B 3/8 3-1/4 4 1/2 0.25

•C1DQ60 U37-3.50 3/8 3-1/2 4-1/4 3/8 0.04

•C1DQ64 U37-3.75-50D 3/8 3-3/4 4-1/2 1/2 0.15

•C1DQ66 U37-4.00-62B 3/8 4 4-3/4 5/8 0.13

•C1DQ69 U37-4.25-SQB 3/8 4-1/4 5 3/8 0.09

•C1DQ67 U37-4.25-50D 3/8 4-1/4 5 1/2 0.10

•C1DQ68 U37-4.25-62B 3/8 4-1/4 5 5/8 0.08

•C1DQ70 U37-4.50-62B 3/8 4-1/2 5-1/4 5/8 1.50

•C1EV13 U37-5.00-62B 3/8 5 5-3/4 5/8 0.17

•C1DQ77 U37-5.25 3/8 5-1/4 6 3/8 0.10

•C1DQ78 U37-5.25-50D 3/8 5-1/4 6 1/2 0.15

•C1DQ80 U37-6.25-50D 3/8 6-1/4 7 1/2 0.17

•C1DQ81 U50-2.00-SQB 1/2 2 3 1/2 0.08

•C1DQ82 U50-2.50 1/2 2-1/2 3-1/2 1/2 0.75

Cotton Fabric & Rubber Piston Cups

Material: Cotton fabric & rubber. Temperature Range: -65° to 220°F. Pressure Range: 0 to 3000 PSI. Note: Hole is punched if hole size listed in table.


Catalog Part No.

Model Number

Cross Sect. (in)

I.D. (in)

O.D. (in)

Ht H (in) Wt.

Price Each

Cotton Fabric & Rubber Piston Cups

Catalog Part No.

Model Number

Bore Dia. (in)

Lip Ht (in)

Thick (in)

Hole Size (in) Wt.

Price Each

•C1CB74 9125-000F 1-1/4 7/16 3/32 -- 0.01

•C1CB75 9150-000F 1-1/2 1/2 1/8 -- 0.10

•C1CB82 9200-000F 2 1/2 1/8 -- 0.03

•C1CC42 9250-000F 2-1/2 1/2 1/8 -- 0.04

•C1CC52 9300-000F 3 5/8 5/32 -- 0.08

•C1CC63 9400-000F 4 5/8 5/32 -- 0.14

Vee Packing Sets

All sets include fabric reinforced rubber vee cups. When feasible, one or two urethane vee rings are included to improve low pressure sealing. Most sets use nylon adaptors.

Material: Fabric reinforced rubber & urethane vee rings, nylon top and bottom adaptors.

Temperature Range: -65°F to 220°F. Pressure Range: 0 to 3000 PSI (4 Vees). 0 to 5000

PSI (5 Vees). 0 to 10,000 PSI (6 Vees). Construction Code: 1st number in Code is quantity of

Top nylon adaptors (usually 1). 2nd number is quantity of Urethane vee rings. 3rd number is quantity of Fabric vee rings. 4th number is quantity of Bottom nylon adaptors (usually 1).

Vee Packing SetsCatalog Part No.

Model Number

Code TUFB

I.D. (in)

O.D. (in) Ht (in) Wt.

Price Each

•C1DR63 VS06204X100 1051 5/8 1-1/8 1 0.05

•C1DR64 VS07504X100 1051 3/4 1-1/4 1 0.35

•C1DR66 VS08104X087 1041 13/16 1-5/16 7/8 0.50

•C1DR68 VS08704X100 1041 7/8 1-3/8 1 0.01

•C1DR69 VS10003X095 1231 1 1-3/8 61/64 0.35

•C1DR70 VS10004X100 1051 1 1-1/2 1 0.05

C1DR71 VS10005X103 1041 1 1-5/8 1-1/32 0.35

•C1DR72 VS11204X087 1041 1-1/8 1-5/8 7/8 0.04

•C1DR74 VS12504X082 1221 1-1/4 1-3/4 13/16 0.15

•C1DR77 VS15004X082 1041 1-1/2 2 13/16 0.05

•C1DR78 VS15004X100 1231 1-1/2 2 1 0.20

•C1DR79 VS15004X112 1241 1-1/2 2 1-1/8 0.35

Inch Sizes


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


•C1DR83 VS16205X103 1041 1-5/8 2-1/4 1-1/32 0.10

•C1DR84 VS17504X100 1051 1-3/4 2-1/4 1 0.07

•C1DR85 VS17505X103 1221 1-3/4 2-3/8 1-1/32 0.20

•C1DR87 VS20004X087 1221 2 2-1/2 7/8 0.10

•C1DR88 VS20004X100 1231 2 2-1/2 1 0.50

•C1DR89 VS20004X112 1331 2 2-1/2 1-1/8 0.50

•C1DR90 VS20005X103 1041 2 2-5/8 1-1/32 0.11

•C1DR91 VS20006X118 1221 2 2-3/4 1-3/16 0.14

•C1DR94 VS22504X082 1131 2-1/4 2-3/4 13/16 0.25

•C1DR95 VS22504X100 1231 2-1/4 2-3/4 1 0.08

C1DR96 VS22505X103 1041 2-1/4 2-7/8 1-1/32 0.10

•C1DR97 VS22506X100 1031 2-1/4 3 1 0.14

•C1DS12 VS25004X082 1041 2-1/2 3 13/16 0.08

•C1DS16 VS27506X118 1221 2-3/4 3-1/2 1-3/16 0.50

•C1DS17 VS30004X087 1041 3 3-1/2 7/8 0.10

•C1DS19 VS32506X118 1041 3-1/4 4 1-3/16 0.24

•C1DS20 VS32506X137 1051 3-1/4 4 1-3/8 0.15

•C1DS21 VS35004X075 1121 3-1/2 4 3/4 0.10

•C1DS22 VS35004X100 1231 3-1/2 4 1 0.13

•C1DS24 VS37504X100 1231 3-3/4 4-1/4 1 0.10

•C1DS25 VS37506X118 1221 3-3/4 4-1/2 1-3/16 0.20

•C1DS27 VS40004X100 1231 4 4-1/2 1 0.15

•C1DS28 VS40004X112 1241 4 4-1/2 1-1/8 0.20

•C1DS31 VS45004X100 1051 4-1/2 5 1 0.10

•C1DS34 VS47506X118 1221 4-3/4 5-1/2 1-3/16 0.35

•C1DS36 VS50004X112 1241 5 5-1/2 1-1/8 0.21

•C1DS40 VS60004X100 1231 6 6-1/2 1 0.22

•C1DS42 VS70004X100 1231 7 7-1/2 1 0.25

Nylon Wear Rings

Made of glass reinforced nylon with physical properties equivalent to bronze. Highly recommended due to low wear rate, non-scoring properties and ability to ingest metal chips. SC suffix designates a scarf cut design. ST suffix designates a step cut design.

Temperature Range: -40°F to 250°F. Tensile Strength: 27,000 PSI. Compressive Strength: 35,000 PSI.

Nylon Wear RingsCatalog Part No.

Model Number

Thickness (in)

Width (in)

O.D. (in) Wt.

Price Each

•C1BW37 612-200-050 1/8 1/2 2 0.02

•C1FW63 612-225-050 1/8 1/2 2-1/4 0.02

•C1BW41 612-250-050 1/8 1/2 2-1/2 0.01

Vee Packing SetsCatalog Part No.

Model Number

Code TUFB

I.D. (in)

O.D. (in) Ht (in) Wt.

Price Each

•C1KK53 612-275-050 1/8 1/2 2-3/4 0.04

•C1BW45 612-300-050 1/8 1/2 3 0.05

•C1BW50 612-350-050 1/8 1/2 3-1/2 0.25

•C1FE81 612-375-050 1/8 1/2 3-3/4 0.04

•C1BW53 612-400-050 1/8 1/2 4 0.05

•C1BW56 612-450-050 1/8 1/2 4-1/2 0.05

•C1GH59 612-500-050 1/8 1/2 5 0.05

C1KK57 612-550-050 1/8 1/2 5-1/4 0.06

•C1BW62 612-600-050 1/8 1/2 6 0.07

C1KK58 612-700-050 1/8 1/2 7 0.09

•C1BW38 612-200-062 1/8 5/8 2 0.10

•C1BW36 612-200-037 1/8 3/8 2 0.01

•C1BW40 612-250-037 1/8 3/8 2-1/2 0.02

•C1BW42 612-250-062 1/8 5/8 2-1/2 0.05

•C1BW44 612-300-037 1/8 3/8 3 0.02

•C1BW49 612-350-037 1/8 3/8 3-1/2 0.05

•C1BW52 612-400-037 1/8 3/8 4 0.03

•C1BW54 612-400-062 1/8 5/8 4 0.05

•C1BW61 612-600-037 1/8 3/8 6 0.15

•C1BW63 612-600-062 1/8 5/8 6 0.01

•C1BW39 612-200-075 1/8 3/4 2 0.05

•C1BW43 612-250-075 1/8 3/4 2-1/2 0.04

•C1BW47 612-300-075 1/8 3/4 3 0.25

•C1BW51 612-350-075 1/8 3/4 3-1/2 0.05

•C1GM70 612-400-075 1/8 3/4 4 0.06

•C1BW58 612-450-075 1/8 3/4 4-1/2 0.10

C1GM71 612-500-075 1/8 3/4 5 0.08

C1KK54 612-275-100 1/8 1 2-3/4 0.05

C1KK55 612-300-100 1/8 1 3 0.06

•C1BW59 612-500-100 1/8 1 5 0.11

Piston T-Seals

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a groove comparable to size required for an o-ring. T-Seals are non-spiraling and extrusion resistant to 10,000 PSI.

Material: Hard plastic back-up rings. Buna-N rubber seal.

Temperature Range: -65°F to 220° F. Pressure Range: 0 to 10,000 PSI.

Nylon Wear RingsCatalog Part No.

Model Number

Thickness (in)

Width (in)

O.D. (in) Wt.

Price Each

Inch Sizes


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Piston T-Seals

Catalog Part No. Model Number

Bore Dia. (in)

O-Ring Groove Dash No. Wt.

Price Each

•C1DM26 TP-019 1-1/2 -218 0.10

•C1DM28 TP-024 2 -326 0.10

•C1DM29 TP-026 2-1/4 -328 0.35

•C1DM30 TP-028 2-1/2 -330 0.25

•C1DM32 TP-031 2-7/8 -333 0.25

•C1DM33 TP-032 3 -334 0.25

•C1DM34 TP-035 3-1/2 -338 0.35

•C1DM36 TP-039 4 -342 0.35

•C1DM38 TP-047 5 -350 0.35

•C1DM39 TP-051 5-1/2 -429 0.10

•C1DM40 TP-055 6 -433 0.20

Cast Iron Piston Rings

Material: Cast Iron. When using cast iron piston rings, it is crucial to use the

correct groove design for proper performance of the cylinder. Please use the following guidelines when cutting a cast iron piston ring groove.

Groove Width: To permit the ring to slide freely into the groove, the groove must be at least 0.001 inches wider than the maximum piston ring width with a tolerance of +0.003/-0 inches.

Groove Depth: Grooves must be at least 0.015 inches deeper than the maximum radial wall thickness of the piston ring with a tolerance of +0.003/-0 inches. This is to avoid any possibility of the ring bottoming in the groove when the ring is compressed to its working diameter.

Radial Clearance: The radial clearance between the cylinder bore and piston should be less than 1/3 of the radial wall thickness of the piston ring to ensure sealing effectiveness.

Cast Iron Piston Rings

Catalog Part No.

Model Number

O.D. (in)

Width (in)

Wall Thickness

(in) Wt.Price Each

•C1DK99 SPR-4002 4.000 0.186 0.187

0.127/0.142 0.01

•C1DL12 SPR-6004 6.000 0.310 0.311

0.191/0.206 0.15

C1GG42 SPR-7002 7.0000.248 0.249 0.228/0.243 0.32

Rod T-Seals

T-Seals combine a resilient sealing ring with a hard, split back-up ring on each side of the sealing element. The assembly installs in a groove comparable to size required for an o-ring. T-Seals are non-spiraling and extrusion resistant to 10,000 PSI.

Material: Hard plastic back-up rings. Buna-N rubber seal.

Temperature Range: -65°F to 220° F. Pressure Range: 0 to 10,000 PSI.

Rod T-Seals


Rod Dia. (in)

O-Ring Groove Dash No. Wt.

Price Each

•C1DM44 TR-008 5/8 -208 0.25

•C1DM52 TR-027 2 -329 0.05

C1FD17 TR-029 2-1/4 -331 0.02

•C1DM55 TR-032 2-5/8 -334 0.15

Urethane Wiper Rings • Style AN

Material: Urethane. Temperature Range: -65°F to 220°F. Note: SH suffix designates slotted heel design. V suffix

designates fluorocarbon material. B suffix designates carboxilated nitrile material.

Inch Sizes


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Urethane Wiper Rings • Style AN

Catalog Part No.

Model Number

Rod Dia. A

(in)

Groove O.D. B

(in)

Groove Width C

(in) Wt.Price Each

•C1CH86 AN-02 0.560 0.823 0.104 0.01

•C1CH87 AN-03 0.623 0.885 0.104 0.01

•C1CH88 AN-04 0.685 0.948 0.104 0.02

•C1CH89 AN-05 0.748 1.010 0.104 0.01

•C1CH91 AN-07 0.873 1.147 0.104 0.02

•C1CH92 AN-08 0.935 1.209 0.104 0.01

•C1CH93 AN-09 0.998 1.272 0.104 0.01

•C1CH95 AN-11 1.123 1.397 0.104 0.01

•C1CH96 AN-12 1.185 1.459 0.104 0.03

•C1CH97 AN-13 1.248 1.522 0.104 0.01

•C1CH98 AN-15 1.373 1.677 0.104 0.01

•C1CH99 AN-16 1.435 1.739 0.104 0.01

•C1CJ11 AN-17 1.498 1.802 0.104 0.01

•C1CJ12 AN-18 1.623 1.927 0.104 0.01

•C1CJ13 AN-19 1.748 2.052 0.104 0.01

•C1CJ14 AN-20 1.873 2.177 0.104 0.01

•C1CJ15 AN-21 1.998 2.302 0.104 0.01

•C1CJ16 AN-22 2.123 2.427 0.104 0.01

•C1CJ17 AN-23 2.248 2.552 0.104 0.01

•C1CJ18 AN-24 2.373 2.677 0.104 0.01

•C1CJ19 AN-25 2.498 2.802 0.104 0.01

•C1CJ20 AN-26 2.623 2.989 0.119 0.25

•C1CJ23 AN-29 2.997 3.364 0.119 0.01

•C1CJ24 AN-31 3.247 3.614 0.119 0.01

•C1CJ26 AN-33 3.497 3.864 0.119 0.10

•C1CJ27 AN-35 3.747 4.114 0.119 0.02

•C1CJ28 AN-37 3.997 4.427 0.135 0.02

•C1CJ30 AN-41 4.497 4.927 0.135 0.02

•C1CJ32 AN-45 4.997 5.427 0.135 0.03

•C1CJ33 AN-49 5.497 5.927 0.135 0.10

Urethane Wiper Rings • Style BT

Material: Urethane. Temperature Range: -65°F to 220°F.

Urethane Wiper Rings • Style BT

Catalog Part No.

Model Number

Rod Dia. A

(in)

Wiper O.D. B

(in)

Base Thickness C

(in) Wt.Price Each

•C1CL80 BT10060 1 1-3/8 3/16 0.05

•C1CL83 BT10860 1-1/2 1-7/8 3/16 0.10

•C1CL85 BT20060 2 2-3/8 3/16 0.01

Metal Clad Rubber Wiper Rings

Material: Rubber. Temperature Range: -40°F to 240°F.

Metal Clad Rubber Wiper Rings

Catalog Part No.

Model Number

Rod Dia. A

(in)

Wiper O.D. B

(in) Ht C (in) Wt.Price Each

•C1DD80 MCN-1001 1 1-1/4 1/8 0.01

•C1DD81 MCN-1003 1 1-3/8 3/16 0.10

•C1DD82 MCN-1005 1 1-1/2 3/16 0.02

•C1DD84 MCN-1253 1-1/4 1-11/16 3/16 0.01

•C1DD85 MCN-1254 1-1/4 1-3/4 1/4 0.01

•C1DD86 MCN-1375 1-3/8 1-3/4 3/16 0.01

•C1DD87 MCN-1502 1-1/2 1-7/8 1/4 0.10

•C1DD88 MCN-1503 1-1/2 1-7/8 3/16 0.01

•C1DD89 MCN-1504 1-1/2 2 1/4 0.05

•C1DD90 MCN-1753 1-3/4 2-1/8 3/16 0.02

•C1DD91 MCN-1754 1-3/4 2-1/4 1/4 0.10

•C1DD92 MCN-1755 1-3/4 2-3/8 1/4 0.04

•C1DD94 MCN-2001 2 2-3/8 3/16 0.02

•C1DD95 MCN-2002 2 2-5/8 1/4 0.04

•C1DD96 MCN-2003 2 2-1/2 1/4 0.04

•C1DD97 MCN-2253 2-1/4 2-3/4 1/4 0.04

•C1DD99 MCN-2501 2-1/2 3 1/4 0.05

•C1DE12 MCN-3001 3 3-1/2 1/4 0.01

Metal Clad Urethane Wiper Rings

90A Durometer urethane lip securely bonded to sturdy metal case. Non-abrasive and highly effective in removing dirt and contaminants from the rod.



Catalog Part No.

Model Number

Rod Dia. A

(in)

Wiper O.D. B


•C1DE14 MCU-0750-G 3/4 1-1/4 5/16 0.35

•C1DE15 MCU-0875-G 7/8 1-3/8 5/16 0.02

Inch Sizes


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



•C1DE16 MCU-1000-G 1 1-1/2 5/16 0.03

•C1DE17 MCU-1120-G 1-1/8 1-5/8 5/16 0.10

•C1DE18 MCU-1187-G 1-3/16 1-5/8 1/4 0.02

•C1DE20 MCU-1375-G 1-3/8 1-7/8 5/16 0.03

•C1DE34 MCU-2006-G 2 2-11/16 3/8 0.01

•C1DE37 MCU-2252-G 2-1/4 3 1/4 0.25

C1DE39 MCU-2376-G 2-3/8 3-1/8 3/8 0.10

•C1DE44 MCU-2503-G 2-1/2 3 3/16 0.05

•C1DE57 MCU-3506-G 3-1/2 4-1/8 5/16 0.11

Heavy Duty Metal Clad Urethane Wiper Rings

Utilizing a sturdy metal case, these wipers are molded from the same high performance urethane used in Heavy-Duty U-Seals. Built for severe service, these wipers are capable of surviving hostile environments.


Heavy Duty Metal Clad Urethane Wiper Rings

Catalog Part No.

Model Number

Rod Dia. A

(in)

Wiper O.D. B


•C1KM74 MCU-0625-D 5/8 1-1/8 5/16 0.02

•C1KM75 MCU-1500-D 1-1/2 2 1/4 0.03

•C1GK26 MCU-1751-D 1-3/4 2-1/4 1/4 0.03

•C1KG30 MCU-2000-D 2 2-1/2 5/16 0.05

•C1KH35 MCU-2500-D 2-1/2 3 5/16 0.06

•C1GK27 MCU-2750-D 2-3/4 3-1/4 5/16 0.07

•C1KM76 MCU-3000-D 3 3-1/2 5/16 0.08


Catalog Part No.

Model Number

Rod Dia. A

(in)

Wiper O.D. B


Urethane Wiper Rings • Style ST

Precision molded from 90A durometer urethane. Flexible enough to easily snap into a groove yet tough enough to handle difficult rod wiping applications. V suffix designates fluorocarbon construction.

Material: Urethane or Fluorocarbon (if V suffix). Temperature Range: Urethane -65°F to 220°F.

Fluorocarbon -20°F to 400°F.

Urethane Wiper Rings • Style ST

Catalog Part No.

Model Number

Rod Dia. A

(in)

Wiper O.D. B

(in)

Base Thickness C

(in) Wt.Price Each

•C1DL53 ST-50 1/2 3/4 1/8 0.20

•C1DL54 ST-62 5/8 7/8 1/8 0.15

•C1DL55 ST-75 3/4 1-1/8 3/16 0.01

•C1DL56 ST-87 7/8 1-1/4 3/16 0.03

•C1DL24 ST-100 1 1-3/8 3/16 0.01

•C1DL25 ST-112 1-1/8 1-1/2 3/16 0.01

•C1DL26 ST-118 1-3/16 1-9/16 3/16 0.25

•C1DL27 ST-125 1-1/4 1-5/8 3/16 0.01

•C1DL28 ST-137 1-3/8 1-3/4 3/16 0.01

•C1DL30 ST-150 1-1/2 1-7/8 3/16 0.01

•C1DL31 ST-162 1-5/8 2 3/16 0.01

•C1DL32 ST-175 1-3/4 2-1/8 3/16 0.01

•C1DL33 ST-187 1-7/8 2-1/4 3/16 0.04

•C1DL35 ST-200 2 2-1/2 1/4 0.02

•C1DL36 ST-212 2-1/8 2-5/8 1/4 0.01

•C1DL37 ST-225 2-1/4 2-3/4 1/4 0.03

•C1DL40 ST-250 2-1/2 3 1/4 0.05

•C1DL41 ST-275 2-3/4 3-1/4 1/4 0.15

•C1DL43 ST-300 3 3-1/2 1/4 0.01

•C1DL44 ST-325 3-1/4 3-3/4 1/4 0.04

•C1DL46 ST-350 3-1/2 4 1/4 0.45

•C1DL48 ST-375 3-3/4 4-1/4 1/4 0.01

•C1DL49 ST-400 4 4-1/2 1/4 0.35

•C1DL51 ST-450 4-1/2 5-1/4 3/8 0.95

•C1DL52 ST-475 4-3/4 5-1/2 3/8 0.12

Inch Sizes


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Urethane Wiper Rings • Style KW

Material: Urethane. Temperature Range: -65°F to 220° F.

Urethane Wiper Rings • Style KW

Catalog Part No.

Model Number

Rod Dia. A

(in)

Wiper O.D. B

(in)

Base Thickness C

(in) Wt.Price Each

•C1DC94 KW-0750 3/4 1-1/8 0.190 0.03

•C1DC95 KW-0875 7/8 1-1/4 0.190 0.05

•C1DC96 KW-1000 1 1-3/8 0.190 0.01

•C1DC98 KW-1250 1-1/4 1-5/8 0.190 0.02

•C1DC99 KW-1375 1-3/8 1-3/4 0.190 0.05

•C1DD11 KW-1500 1-1/2 1-7/8 0.190 0.02

•C1DD13 KW-1750 1-3/4 2-1/8 0.190 0.05

•C1DD14 KW-2000 2 2-3/8 0.190 0.02

•C1DD16 KW-2500 2-1/2 3 0.250 0.08

Buna-N Quattro Rings • Style QR

The four lobed design of these seals provide twice the sealing surface of ordinary o-rings. They can be used in a variety of static and dynamic sealing applications including rotary, reciprocating or oscillating motion.

Material: Buna-N. Temperature Range: -40°F to 240°F. Pressure Range: Varies according to diametral

clearance.

Buna-N Quattro Rings • Style QRCatalog Part No.

Model Number Dash Size Pkg. Qty Wt.

Price Each

•C1FC63 QR-4005 -005 6 0.01

•C1FC68 QR-4010 -010 6 0.01

•C1FC69 QR-4011 -011 6 0.01

•C1FC74 QR-4016 -016 5 0.01

•C1FC77 QR-4110 -110 5 0.01

•C1FC78 QR-4111 -111 5 0.01

•C1FC79 QR-4112 -112 5 0.01

•C1FC80 QR-4113 -113 5 0.01

•C1FC81 QR-4114 -114 5 0.01

•C1FC82 QR-4115 -115 5 0.01

•C1FC83 QR-4116 -116 5 0.01

•C1FC84 QR-4117 -117 5 0.01

•C1FC89 QR-4210 -210 5 0.01

•C1FC90 QR-4211 -211 5 0.01

•C1FC91 QR-4212 -212 5 0.01

•C1FC92 QR-4213 -213 5 0.01

•C1FC93 QR-4214 -214 5 0.01

•C1FC94 QR-4215 -215 5 0.01

•C1FC95 QR-4216 -216 4 0.01

•C1FC96 QR-4217 -217 4 0.01

•C1FC97 QR-4218 -218 4 0.01

•C1FC98 QR-4219 -219 4 0.01

Caterpillar D-Rings

Note: Caterpillar part numbers are used as a reference only. It is not implied that these parts are original replacement parts.

Caterpillar D-RingsCatalog Part No. Model Number I.D. (mm) Wt.

Price Each

•C1EW59 CTC-1P3702 25.4 0.01

•C1EW60 CTC-1P3703 31.9 0.01

•C1EW61 CTC-1P3704 38.2 0.01

•C1EW62 CTC-1P3705 44.7 0.02

Buna-N Quattro Rings • Style QRCatalog Part No.

Model Number Dash Size Pkg. Qty Wt.

Price Each

Inch Sizes


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Glass Filled PTFE Piston Seals • Style 1400

Glass filled PTFE for low breakaway and low running friction. Popular choice of many cylinder manufacturers. Rubber energizer under seal assures positive contact with the dynamic surfaces. Piston diameter F dimensions are given for pistons without wear rings. Material: 15% glass filled PTFE seal with rubber energizer. Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI.



Bore Dia. A (in) ±0.002

Seal Height B & Cross Section C

(in)Groove Width D

(in) ±0.002Groove Dia. E

(in) ±0.002Piston Dia. F (in)

±0.001 Wt.Price Each

•C1DH42 PS1400-24 1.500 0.070 ±0.005 0.083 1.240 1.497 0.01

•C1DH43 PS1400-26 1.625 0.109 ±0.010 0.122 1.233 1.622 0.01

•C1DH44 PS1400-28 1.750 0.109 ±0.010 0.122 1.358 1.747 0.01

•C1DH45 PS1400-32 2.000 0.115 ±0.010 0.129 1.608 1.996 0.01

•C1DH47 PS1400-36 2.250 0.115 ±0.010 0.129 1.858 2.246 0.01

•C1DH48 PS1400-40 2.500 0.115 ±0.010 0.129 2.108 2.496 0.15

•C1DH49 PS1400-44 2.750 0.115 ±0.010 0.129 2.358 2.746 0.01

•C1DH50 PS1400-48 3.000 0.115 ±0.010 0.129 2.608 2.996 0.01

•C1DH51 PS1400-52 3.250 0.115 ±0.010 0.129 2.858 3.246 0.10

•C1DH52 PS1400-56 3.500 0.115 ±0.010 0.129 3.108 3.496 0.02

•C1DH53 PS1400-60 3.750 0.115 ±0.010 0.129 3.358 3.746 0.09

•C1DH54 PS1400-64 4.000 0.115 ±0.010 0.129 3.608 3.996 0.02

•C1DH56 PS1400-72 4.500 0.115 ±0.010 0.129 4.108 4.496 0.25

•C1DH57 PS1400-80 5.000 0.115 ±0.010 0.129 4.608 4.996 0.01

•C1DH60 PS1400-96 6.000 0.143 ±0.010 0.159 5.482 5.996 0.05


Material: 15% glass filled PTFE seal. Rubber energizer. Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons without wear rings.




Seal Height B (in) +0.005

-0.0

Seal Cross Section C (in)

+0.005 -0.0

Groove Width D (in) +0.003

-0.0

Groove Dia. E (in) +0.0 -0.003

Piston Dia. F (in) Wt.

Price Each

•C1DH63 PS1600-32 2.000 0.120 0.055 0.126 1.723 1.999 +0/-0.003 0.10

•C1DH64 PS1600-36 2.250 0.120 0.055 0.126 1.937 2.249 +0/-0.003 0.01

•C1DH65 PS1600-40 2.500 0.120 0.055 0.126 2.223 2.499 +0/-0.003 0.01

Inch Sizes


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


•C1DH66 PS1600-44 2.750 0.150 0.085 0.157 2.348 2.749 +0/-0.004 0.02

•C1DH67 PS1600-48 3.000 0.150 0.085 0.157 2.603 2.999 +0/-0.004 0.10

•C1DH68 PS1600-52 3.250 0.150 0.085 0.157 2.853 3.249 +0/-0.004 0.02

•C1DH69 PS1600-56 3.500 0.150 0.085 0.157 3.103 3.499 +0/-0.004 0.02

•C1DH70 PS1600-64 4.000 0.150 0.085 0.157 3.600 3.999 +0/-0.004 0.02

•C1DH71 PS1600-68 4.250 0.150 0.085 0.157 3.853 4.249 +0/-0.004 0.03


Material: 15% glass filled PTFE seal. Rubber energizer. Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons without wear rings.

Glass Filled PTFE Piston Seals • Style 1800Catalog Part No. Model Number


Seal Height B (in)


Groove Width D (in) ±0.002

Groove Dia. E (in) ±0.004


Price Each

•C1DH73 PS1800-20 1.250 0.116-0.121 0.067-0.073 0.129 0.940 1.249 +0/-0.005 0.01

•C1DH74 PS1800-24 1.500 0.116-0.121 0.067-0.073 0.129 1.190 1.499 +0/-0.005 0.01

•C1DH75 PS1800-32 2.000 0.116-0.121 0.067-0.073 0.129 1.690 1.999 +0/-0.005 0.01

•C1DH76 PS1800-36 2.250 0.116-0.121 0.067-0.073 0.129 1.940 2.249 +0/-0.005 0.01

•C1DH77 PS1800-40 2.500 0.116-0.121 0.067-0.073 0.129 2.190 2.499 +0/-0.005 0.01

•C1DH78 PS1800-48 3.000 0.269-0.274 0.087-0.093 0.284 2.440 2.999 +0/-0.006 0.04

•C1DH80 PS1800-56 3.500 0.269-0.274 0.087-0.093 0.284 2.940 3.499 +0/-0.006 0.01

•C1DH81 PS1800-64 4.000 0.269-0.274 0.087-0.093 0.284 3.440 3.999 +0/-0.006 0.05

•C1DH82 PS1800-68 4.250 0.269-0.274 0.087-0.093 0.284 3.690 4.249 +0/-0.006 0.06

•C1DH83 PS1800-72 4.500 0.269-0.274 0.087-0.093 0.284 3.940 4.499 +0/-0.006 0.03

•C1DH84 PS1800-80 5.000 0.269-0.274 0.087-0.093 0.284 4.440 4.999 +0/-0.006 0.07




Seal Height B (in) +0.005

-0.0


+0.005 -0.0

Groove Width D (in) +0.003

-0.0

Groove Dia. E (in) +0.0 -0.003


Price Each

Inch Sizes


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



•C1DH86 PS1800-88 5.500 0.362-0.367 0.137-0.147 0.379 4.738 5.499 +0/-0.007 0.13

•C1DH87 PS1800-96 6.000 0.362-0.367 0.137-0.147 0.379 5.238 5.999 +0/-0.007 0.14

Bronze Filled PTFE Piston Seals • Style 1850

Material: Bronze filled PTFE Seal. Rubber Energizer. Temperature Range: -40°F to +220°F Pressure Range: 0 to 5000 PSI Note: Piston diameter "F" dimensions are given for pistons without wear. Interchangeable with the PS1800 style piston seal.

Bronze Filled PTFE Piston Seals • Style 1850


Bore Dia. A (in) +0.002

-0.000Seal Height B

(in)Seal Cross

Section C (in)Groove Width D (in) ±0.002



Price Each

C1KM93 PS1850-48 3.000 0.269-0.274 0.087-0.093 0.284 2.440 2.999 +0/-0.006 0.14

C1KM94 PS1850-96 6.000 0.362-0.367 0.137-0.147 0.379 5.238 5.999 +0/-0.007 0.19

Polyurethane Piston Seals • Style 2700

Molded from high grade poly-esters, 5% glass fiber and 5% PTFE. Interchangeable with PS1800 seals. Low friction. High resistance to abrasion & extrusion. The polyurethane material has a high degree of memory and will stretch over a piston and snap into the groove and be ready for immediate assembly. Damage during assembly is virtually eliminated. Piston diameter F dimensions are given for pistons without wear rings. Material: Glass/PTFE filled polyurethane seal. Rubber energizer. Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI.

Polyurethane Piston Seals • Style 2700Catalog Part No. Model Number


Seal Height B (in)





Price Each

•C1DH92 PS2700-32 2.000 0.116-0.121 0.067-0.073 0.129 1.690 1.999 +0/-0.009 0.20

•C1DH96 PS2700-56 3.500 0.269-0.274 0.087-0.093 0.284 2.940 3.499 +0/-0.014 0.02

•C1DH98 PS2700-64 4.000 0.269-0.274 0.087-0.093 0.284 3.440 3.999 +0/-0.014 0.02

Glass Filled PTFE Piston Seals • Style 1800Catalog Part No. Model Number


Seal Height B (in)





Price Each

Inch Sizes


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


•C1DJ11 PS2700-72 4.500 0.269-0.274 0.087-0.093 0.284 3.940 4.499 +0/-0.014 0.02

•C1DJ12 PS2700-80 5.000 0.269-0.274 0.087-0.093 0.284 4.440 4.999 +0/-0.014 0.25

•C1DJ15 PS2700-96 6.000 0.362-0.367 0.137-0.147 0.379 5.238 5.999 +0/-0.014 0.08

•C1DH89 PS2700-112 7.000 0.362-0.367 0.137-0.147 0.379 6.238 6.999 +0/-0.014 0.20

Double-Acting Piston Seals • Style PSC

This seal is a double-acting piston seal designed to replace o-rings, quad-rings and T-seals with the same groove dimensions (o-ring dash number). Style 575 urethane back-up rings may be added to either or both sides of the PSC to accommodate wider groove widths. The PSC is made of 95A durometer polyurethane, giving it high extrusion and abrasion resistance. The crowned sealing surface produces a positive seal from vacuum to high pressure. Material: 95A polyurethane seal, 70A nitrile energizer. Temperature Range: -65°F to 220°F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons without wear rings.

Double-Acting Piston Seals • Style PSCCatalog Part No. Model Number Bore Dia. (in) Seal Height (in)

Groove Width (in) Groove Dia. (in) Piston Dia. (in) Wt.

Price Each

•C1KM95 PSC-218 1.500 +0.002/-0 0.150 0.185 +0.005/-0 1.254 +0/-0.002 1.498 +0/-0.002 0.01

C1KM96 PSC-218-WB 1.500 +0.002/-0 0.265 0.304 +0.005/-0 1.254 +0/-0.002 1.498 +0/-0.002 0.01

•C1GG32 PSC-326 2.000 +0.002/-0 0.255 0.280 +0.005/-0 1.625 +0/-0.002 1.998 +0/-0.002 0.01

•C1GG33 PSC-326-WB 2.000 +0.002/-0 0.370 0.423 +0.005/-0 1.625 +0/-0.002 1.998 +0/-0.002 0.01

•C1GG34 PSC-330 2.500 +0.002/-0 0.255 0.280 +0.005/-0 2.125 +0/-0.002 2.498 +0/-0.002 0.02

•C1KM97 PSC-334 3.000 +0.002/-0 0.255 0.280 +0.005/-0 2.624 +0/-0.004 2.997 +0/-0.004 0.03

•C1GG35 PSC-334-WB 3.000 +0.004/-0 0.370 0.423 +0.005/-0 2.624 +0/-0.004 2.997 +0/-0.004 0.03

•C1GG36 PSC-338 3.500 +0.004/-0 0.255 0.280 +0.005/-0 3.125 +0/-0.004 3.498 +0/-0.004 0.02

•C1GG37 PSC-342 4.000 +0.004/-0 0.255 0.280 +0.005/-0 3.625 +0/-0.004 3.998 +0/-0.004 0.02

•C1KM98 PSC-342-WB 4.000 +0.004/-0 0.370 0.424 +0.005/-0 3.625 +0/-0.004 3.998 +0/-0.004 0.02

C1KM99 PSC-350 5.000 +0.004/-0 0.255 0.280 +0.005/-0 4.626 +0/-0.004 4.999 +0/-0.004 0.06

•C1GG38 PSC-433-WB 6.000 +0.004/-0 0.500 0.574 +0.006/-0 5.521 +0/-0.004 5.999 +0/-0.004 0.08

Polyurethane Piston Seals • Style 2700Catalog Part No. Model Number


Seal Height B (in)





Price Each

Inch Sizes


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Bronze Filled Piston Seals • Style PSQ

These piston seals provide bi-directional, low friction sealing with increased stability and superior leakage control. The square cut energizer provides low pressure sealing and eliminates backside leakage. This seal also effectively seals between different fluids on each side of the piston seal, making gas/liquid sealing combinations possible. Material: 40% bronze filled PTFE seal, rubber energizer and quattro ring. Temperature Range: -40°F to 220°F. Pressure Range: 0 to 5,000 PSI. Note: Piston diameter F dimensions are given for pistons without wear rings.

Bronze Filled Piston Seals • Style PSQCatalog Part No. Model Number Bore Dia. (in) Seal Height (in)

Groove Width (in) Groove Dia. (in) Piston Dia. (in) Wt.

Price Each

•C1GM40 PSQ-40 2.500 +0.004/-0 0.271 0.288/0.293 1.884 2.499 0.04

•C1GN12 PSQ-48 3.000 +0.004/-0 0.271 0.288/0.293 2.384 2.999 0.05

•C1GN14 PSQ-56 3.500 +0.004/-0 0.271 0.288/0.293 2.884 3.499 0.05

•C1GN15 PSQ-64 4.000 +0.004/-0 0.271 0.288/0.293 3.384 3.999 0.07

•C1KN11 PSQ-80 5.000 +0.004/-0 0.271 0.288/0.293 4.384 4.999 0.09

Inch Sizes


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


70 Durometer Buna-N O-Rings

Material: 70 Durometer Buna-N. Temperature Range: -40°F . to 240°F.

70 Durometer Buna-N O-RingsCatalog Part No. Model Number

Dash Size

Nominal I.D.

Nominal O.D.

Nominal Width Actual I.D. Actual O.D.

Actual Width

Pkg. Qty. Wt.

Price Each

•C1CC95 A-003 -003 1/16 3/16 1/16 0.056 0.176 0.06 50 0.01

•C1CC97 A-005 -005 3/32 7/32 1/16 0.101 0.241 0.07 50 0.01

•C1CC98 A-006 -006 1/8 1/4 1/16 0.114 0.254 0.07 50 0.01

•C1CC99 A-007 -007 5/32 9/32 1/16 0.145 0.285 0.07 50 0.01

•C1CD11 A-008 -008 3/16 5/16 1/16 0.176 0.316 0.07 50 0.01

•C1CD12 A-009 -009 7/32 11/32 1/16 0.208 0.348 0.07 50 0.01

•C1CD13 A-010 -010 1/4 3/8 1/16 0.239 0.379 0.07 50 0.01

•C1CD14 A-011 -011 5/16 7/16 1/16 0.301 0.441 0.07 50 0.01

•C1CD15 A-012 -012 3/8 1/2 1/16 0.364 0.504 0.07 50 0.01

•C1CD16 A-013 -013 7/16 9/16 1/16 0.426 0.566 0.07 50 0.01

•C1CD17 A-014 -014 1/2 5/8 1/16 0.489 0.629 0.07 50 0.01

•C1CD19 A-015 -015 9/16 11/16 1/16 0.551 0.691 0.07 50 0.01

•C1CD20 A-016 -016 5/8 3/4 1/16 0.614 0.754 0.07 50 0.01

•C1CD21 A-017 -017 11/16 13/16 1/16 0.676 0.816 0.07 50 0.01

•C1CD22 A-018 -018 3/4 7/8 1/16 0.739 0.879 0.07 50 0.01

•C1CD23 A-019 -019 13/16 15/16 1/16 0.801 0.941 0.07 50 0.01

•C1CD24 A-020 -020 7/8 1 1/16 0.864 1.004 0.07 50 0.01

•C1CD25 A-021 -021 15/16 1-1/16 1/16 0.926 1.066 0.07 50 0.01

•C1CD26 A-022 -022 1 1-1/8 1/16 0.989 1.129 0.07 50 0.01

•C1CD27 A-023 -023 1-1/16 1-3/16 1/16 1.051 1.191 0.07 50 0.01

•C1CD29 A-024 -024 1-1/8 1-1/4 1/16 1.114 1.254 0.07 50 0.01

•C1CD30 A-025 -025 1-3/16 1-5/16 1/16 1.176 1.316 0.07 50 0.01

•C1CD31 A-026 -026 1-1/4 1-3/8 1/16 1.239 1.379 0.07 50 0.01

•C1CD32 A-027 -027 1-5/16 1-7/16 1/16 1.301 1.441 0.07 50 0.01

•C1CD33 A-028 -028 1-3/8 1-1/2 1/16 1.364 1.504 0.07 20 0.01

•C1CD35 A-029 -029 1-1/2 1-5/8 1/16 1.489 1.629 0.07 20 0.01

•C1CD36 A-030 -030 1-5/8 1-3/4 1/16 1.614 1.754 0.07 20 0.01

•C1CD37 A-031 -031 1-3/4 1-7/8 1/16 1.739 1.879 0.07 20 0.01

•C1CD38 A-032 -032 1-7/8 2 1/16 1.864 2.004 0.07 20 0.01

•C1CD39 A-033 -033 2 2-1/8 1/16 1.989 2.129 0.07 20 0.01

•C1CD40 A-034 -034 2-1/8 2-1/4 1/16 2.114 2.254 0.07 20 0.01

•C1CD41 A-035 -035 2-1/4 2-3/8 1/16 2.239 2.379 0.07 20 0.01

•C1CD42 A-036 -036 2-3/8 2-1/2 1/16 2.364 2.504 0.07 20 0.01

•C1CD43 A-037 -037 2-1/2 2-5/8 1/16 2.489 2.629 0.07 20 0.01

•C1CD44 A-038 -038 2-5/8 2-3/4 1/16 2.614 2.754 0.07 10 0.01

•C1CD45 A-039 -039 2-3/4 2-7/8 1/16 2.739 2.879 0.07 10 0.01

•C1CD46 A-040 -040 2-7/8 3 1/16 2.864 3.004 0.07 10 0.01

•C1CD47 A-041 -041 3 3-1/8 1/16 2.989 3.129 0.07 10 0.01

•C1CD48 A-042 -042 3-1/4 3-3/8 1/16 3.239 3.379 0.07 10 0.01

•C1CD49 A-043 -043 3-1/2 3-5/8 1/16 3.489 3.629 0.07 10 0.01

•C1CD50 A-044 -044 3-3/4 3-7/8 1/16 3.739 3.879 0.07 10 0.01

•C1CD51 A-045 -045 4 4-1/8 1/16 3.989 4.129 0.07 10 0.01

•C1CD54 A-048 -048 4-3/4 4-7/8 1/16 4.739 4.879 0.07 4 0.01

Inch SizesO-Rings


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



•C1CD55 A-049 -049 5 5-1/8 1/16 4.989 5.129 0.07 4 0.01

•C1CD61 A-106 -106 3/16 3/8 3/32 0.174 0.380 0.103 50 0.01

•C1CD62 A-107 -107 7/32 13/32 3/32 0.206 0.412 0.103 50 0.01

•C1CD63 A-108 -108 1/4 7/16 3/32 0.237 0.443 0.103 50 0.01

•C1CD64 A-109 -109 5/16 1/2 3/32 0.299 0.505 0.103 50 0.01

•C1CD65 A-110-ORING -110 3/8 9/16 3/32 0.362 0.568 0.103 50 0.01

•C1CD66 A-111 -111 7/16 5/8 3/32 0.424 0.630 0.103 50 0.01

•C1CD67 A-112 -112 1/2 11/16 3/32 0.487 0.693 0.103 50 0.01

•C1CD68 A-113 -113 9/16 3/4 3/32 0.549 0.755 0.103 50 0.01

•C1CD69 A-114 -114 5/8 13/16 3/32 0.612 0.818 0.103 50 0.01

•C1CD70 A-115 -115 11/16 7/8 3/32 0.674 0.880 0.103 50 0.01

•C1CD71 A-116 -116 3/4 15/16 3/32 0.737 0.943 0.103 50 0.01

•C1CD72 A-117 -117 13/16 1 3/32 0.799 1.005 0.103 50 0.01

•C1CD73 A-118 -118 7/8 1-1/16 3/32 0.862 1.068 0.103 50 0.01

•C1CD74 A-119 -119 15/16 1-1/8 3/32 0.924 1.130 0.103 50 0.01

•C1CD76 A-120 -120 1 1-3/16 3/32 0.987 1.193 0.103 50 0.01

•C1CD77 A-121 -121 1-1/16 1-1/4 3/32 1.049 1.255 0.103 50 0.01

•C1CD78 A-122 -122 1-1/8 1-5/16 3/32 1.112 1.318 0.103 20 0.01

•C1CD79 A-123 -123 1-3/16 1-3/8 3/32 1.174 1.380 0.103 20 0.01

•C1CD80 A-124 -124 1-1/4 1-7/16 3/32 1.237 1.443 0.103 20 0.01

•C1CD81 A-125 -125 1-5/16 1-1/2 3/32 1.299 1.505 0.103 20 0.01

•C1CD82 A-126 -126 1-3/8 1-9/16 3/32 1.362 1.568 0.103 20 0.01

•C1CD83 A-127 -127 1-7/16 1-5/8 3/32 1.424 1.630 0.103 20 0.01

•C1CD84 A-128 -128 1-1/2 1-11/16 3/32 1.487 1.693 0.103 20 0.01

•C1CD85 A-129-ORING -129 1-9/16 1-3/4 3/32 1.549 1.755 0.103 20 0.01

•C1CD87 A-130 -130 1-5/8 1-13/16 3/32 1.612 1.818 0.103 20 0.01

•C1CD88 A-131-ORING -131 1-11/16 1-7/8 3/32 1.674 1.880 0.103 20 0.01

•C1CD89 A-132-ORING -132 1-3/4 1-15/16 3/32 1.737 1.943 0.103 20 0.01

•C1CD90 A-133 -133 1-13/16 2 3/32 1.799 2.005 0.103 20 0.01

•C1CD91 A-134 -134 1-7/8 2-1/16 3/32 1.862 2.068 0.103 20 0.01

•C1CD92 A-135 -135 1-15/16 2-1/8 3/32 1.925 2.131 0.103 20 0.01

•C1CD93 A-136 -136 2 2-3/16 3/32 1.987 2.193 0.103 20 0.01

•C1CD94 A-137 -137 2-1/16 2-1/4 3/32 2.050 2.256 0.103 20 0.01

•C1CD95 A-138 -138 2-1/8 2-5/16 3/32 2.112 2.318 0.103 20 0.01

•C1CD96 A-139 -139 2-3/16 2-3/8 3/32 2.175 2.381 0.103 20 0.01

•C1CD97 A-140 -140 2-1/4 2-7/16 3/32 2.237 2.443 0.103 20 0.01

•C1CD98 A-141-ORING -141 2-5/16 2-1/2 3/32 2.300 2.506 0.103 20 0.01

•C1CD99 A-142 -142 2-3/8 2-9/16 3/32 2.362 2.568 0.103 20 0.01

•C1CE11 A-143 -143 2-7/16 2-5/8 3/32 2.425 2.631 0.103 20 0.01

•C1CE12 A-144 -144 2-1/2 2-11/16 3/32 2.487 2.693 0.103 20 0.01

•C1CE13 A-145 -145 2-9/16 2-3/4 3/32 2.550 2.756 0.103 20 0.01

•C1CE14 A-146 -146 2-5/8 2-13/16 3/32 2.612 2.818 0.103 20 0.01

•C1CE15 A-147 -147 2-11/16 2-7/8 3/32 2.675 2.881 0.103 20 0.01

•C1CE16 A-148 -148 2-3/4 2-15/16 3/32 2.737 2.943 0.103 10 0.01

•C1CE17 A-149 -149 2-13/16 3 3/32 2.800 3.006 0.103 10 0.01

•C1CE18 A-150 -150 2-7/8 3-1/16 3/32 2.862 3.068 0.103 10 0.01

•C1CE19 A-151 -151 3 3-3/16 3/32 2.987 3.193 0.103 10 0.01

•C1CE20 A-152 -152 3-1/4 3-7/16 3/32 3.237 3.443 0.103 10 0.01

•C1CE21 A-153 -153 3-1/2 3-11/16 3/32 3.487 3.693 0.103 10 0.01


Dash Size

Nominal I.D.

Nominal O.D.


Actual Width

Pkg. Qty. Wt.

Price Each

Inch SizesO-Rings


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


•C1CE22 A-154 -154 3-3/4 3-15/16 3/32 3.737 3.943 0.103 10 0.01

•C1CE23 A-155 -155 4 4-3/16 3/32 3.987 4.193 0.103 10 0.01

•C1CE24 A-156 -156 4-1/4 4-7/16 3/32 4.237 4.443 0.103 10 0.01

•C1CE25 A-157 -157 4-1/2 4-11/16 3/32 4.487 4.693 0.103 4 0.01

•C1CE27 A-158 -158 4-3/4 4-15/16 3/32 4.737 4.943 0.103 4 0.01

•C1CE28 A-159 -159 5 5-3/16 3/32 4.987 5.193 0.103 4 0.01

•C1CE29 A-160 -160 5-1/4 5-7/16 3/32 5.237 5.443 0.103 4 0.01

•C1CE30 A-161 -161 5-1/2 5-11/16 3/32 5.487 5.693 0.103 4 0.01

•C1CE32 A-163 -163 6 6-3/16 3/32 5.987 6.193 0.103 2 0.01

•C1CE33 A-164 -164 6-1/4 6-7/16 3/32 6.237 6.443 0.103 2 0.01

•C1CE38 A-169 -169 7-1/2 7-11/16 3/32 7.487 7.693 0.103 2 0.01

•C1CE39 A-170 -170 7-3/4 7-15/16 3/32 7.737 7.943 0.103 2 0.01

•C1CE41 A-172 -172 8-1/4 8-7/16 3/32 8.237 8.443 0.103 2 0.01

•C1CE49 A-202 -202 1/4 1/2 1/8 0.234 0.512 0.139 50 0.01

•C1CE50 A-203 -203 5/16 9/16 1/8 0.296 0.574 0.139 50 0.01

•C1CE51 A-204 -204 3/8 5/8 1/8 0.359 0.637 0.139 50 0.01

•C1CE52 A-205 -205 7/16 11/16 1/8 0.421 0.699 0.139 50 0.01

•C1CE53 A-206 -206 1/2 3/4 1/8 0.484 0.762 0.139 50 0.01

•C1CE54 A-207 -207 9/16 13/16 1/8 0.546 0.824 0.139 50 0.01

•C1CE55 A-208 -208 5/8 7/8 1/8 0.609 0.887 0.139 20 0.01

•C1CE56 A-209 -209 11/16 15/16 1/8 0.671 0.949 0.139 20 0.01

•C1CE58 A-210-ORING -210 3/4 1 1/8 0.734 1.012 0.139 20 0.01

•C1CE59 A-211 -211 13/16 1-1/16 1/8 0.796 1.074 0.139 20 0.01

•C1CE60 A-212 -212 7/8 1-1/8 1/8 0.859 1.137 0.139 20 0.01

•C1CE61 A-213 -213 15/16 1-3/16 1/8 0.921 1.199 0.139 20 0.01

•C1CE62 A-214 -214 1 1-1/4 1/8 0.984 1.262 0.139 20 0.01

•C1CE64 A-215 -215 1-1/16 1-5/16 1/8 1.046 1.324 0.139 20 0.01

•C1CE65 A-216 -216 1-1/8 1-3/8 1/8 1.109 1.387 0.139 20 0.01

•C1CE66 A-217 -217 1-3/16 1-7/16 1/8 1.171 1.449 0.139 20 0.01

•C1CE67 A-218 -218 1-1/4 1-1/2 1/8 1.234 1.512 0.139 20 0.01

•C1CE68 A-219 -219 1-5/16 1-9/16 1/8 1.296 1.574 0.139 20 0.01

•C1CE70 A-220 -220 1-3/8 1-5/8 1/8 1.359 1.637 0.139 20 0.01

•C1CE71 A-221 -221 1-7/16 1-11/16 1/8 1.421 1.699 0.139 20 0.01

•C1CE72 A-222 -222 1-1/2 1-3/4 1/8 1.484 1.762 0.139 20 0.01

•C1CE74 A-223 -223 1-5/8 1-7/8 1/8 1.609 1.887 0.139 20 0.01

•C1CE75 A-224 -224 1-3/4 2 1/8 1.734 2.012 0.139 20 0.01

•C1CE76 A-225 -225 1-7/8 2-1/8 1/8 1.859 2.137 0.139 20 0.01

•C1CE78 A-226 -226 2 2-1/4 1/8 1.984 2.262 0.139 20 0.01

•C1CE79 A-227 -227 2-1/8 2-3/8 1/8 2.109 2.387 0.139 20 0.01

•C1CE80 A-228 -228 2-1/4 2-1/2 1/8 2.234 2.512 0.139 20 0.01

•C1CE81 A-229 -229 2-3/8 2-5/8 1/8 2.359 2.637 0.139 20 0.01

•C1CE82 A-230 -230 2-1/2 2-3/4 1/8 2.484 2.762 0.139 10 0.01

•C1CE83 A-231 -231 2-5/8 2-7/8 1/8 2.609 2.887 0.139 10 0.01

•C1CE84 A-232 -232 2-3/4 3 1/8 2.734 3.012 0.139 10 0.01

•C1CE86 A-233 -233 2-7/8 3-1/8 1/8 2.859 3.137 0.139 10 0.01

•C1CE87 A-234 -234 3 3-1/4 1/8 2.984 3.262 0.139 10 0.01

C1KL23 A-234-VITON -234 3 3-1/4 1/8 2.984 3.262 0.139 10 0.01

•C1CE88 A-235 -235 3-1/8 3-3/8 1/8 3.109 3.387 0.139 10 0.01

•C1CE89 A-236 -236 3-1/4 3-1/2 1/8 3.234 3.512 0.139 10 0.01


Dash Size

Nominal I.D.

Nominal O.D.


Actual Width

Pkg. Qty. Wt.

Price Each

Inch SizesO-Rings


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



•C1CE90 A-237 -237 3-3/8 3-5/8 1/8 3.359 3.637 0.139 10 0.01

•C1CE91 A-238-ORING -238 3-1/2 3-3/4 1/8 3.484 3.762 0.139 10 0.01

•C1CE92 A-239-ORING -239 3-5/8 3-7/8 1/8 3.609 3.887 0.139 10 0.01

•C1CE93 A-240-ORING -240 3-3/4 4 1/8 3.734 4.012 0.139 10 0.01

•C1CE95 A-241-ORING -241 3-7/8 4-1/8 1/8 3.859 4.137 0.139 10 0.01

•C1CE96 A-242-ORING -242 4 4-1/4 1/8 3.984 4.262 0.139 10 0.01

•C1CE97 A-243 -243 4-1/8 4-3/8 1/8 4.109 4.387 0.139 10 0.01

•C1CE98 A-244 -244 4-1/4 4-1/2 1/8 4.234 4.512 0.139 10 0.01

•C1CE99 A-245 -245 4-3/8 4-5/8 1/8 4.359 4.637 0.139 4 0.01

•C1CF11 A-246 -246 4-1/2 4-3/4 1/8 4.484 4.762 0.139 4 0.01

•C1CF12 A-247 -247 4-5/8 4-7/8 1/8 4.609 4.887 0.139 4 0.01

•C1CF13 A-248 -248 4-3/4 5 1/8 4.734 5.012 0.139 4 0.01

•C1CF14 A-249 -249 4-7/8 5-1/8 1/8 4.859 5.137 0.139 4 0.01

•C1CF15 A-250 -250 5 5-1/4 1/8 4.984 5.262 0.139 4 0.01

•C1CF16 A-251 -251 5-1/8 5-3/8 1/8 5.109 5.387 0.139 4 0.01

•C1CF17 A-252 -252 5-1/4 5-1/2 1/8 5.234 5.512 0.139 4 0.01

•C1CF18 A-253 -253 5-3/8 5-5/8 1/8 5.359 5.637 0.139 4 0.01

•C1CF19 A-254 -254 5-1/2 5-3/4 1/8 5.484 5.762 0.139 4 0.01

•C1CF20 A-255 -255 5-5/8 5-7/8 1/8 5.609 5.887 0.139 4 0.01

•C1CF21 A-256 -256 5-3/4 6 1/8 5.734 6.012 0.139 4 0.01

•C1CF22 A-257 -257 5-7/8 6-1/8 1/8 5.859 6.137 0.139 2 0.01

•C1CF23 A-258-ORING -258 6 6-1/4 1/8 5.984 6.262 0.139 2 0.01

•C1CF24 A-259 -259 6-1/4 6-1/2 1/8 6.234 6.512 0.139 2 0.01

•C1CF25 A-260 -260 6-1/2 6-3/4 1/8 6.484 6.762 0.139 2 0.01

•C1CF26 A-261 -261 6-3/4 7 1/8 6.734 7.012 0.139 2 0.01

•C1CF27 A-262 -262 7 7-1/4 1/8 6.984 7.262 0.139 2 0.01

•C1CF28 A-263 -263 7-1/4 7-1/2 1/8 7.234 7.512 0.139 2 0.01

•C1CF29 A-264 -264 7-1/2 7-3/4 1/8 7.484 7.762 0.139 2 0.01

•C1CF30 A-265 -265 7-3/4 8 1/8 7.734 8.012 0.139 2 0.01

•C1CF31 A-266 -266 8 8-1/4 1/8 7.984 8.262 0.139 2 0.01

•C1CF32 A-267 -267 8-1/4 8-1/2 1/8 8.234 8.512 0.139 2 0.01

•C1CF33 A-268 -268 8-1/2 8-3/4 1/8 8.484 8.762 0.139 2 0.01

•C1CF34 A-269 -269 8-3/4 9 1/8 8.734 9.012 0.139 2 0.01

•C1CF39 A-274 -274 10 10-1/4 1/8 9.984 10.262 0.139 2 0.01

•C1CF40 A-275 -275 10-1/2 10-3/4 1/8 10.484 10.762 0.139 2 0.01

•C1CF41 A-276 -276 11 11-1/4 1/8 10.984 11.262 0.139 1 0.01

•C1CF42 A-277 -277 11-1/2 11-3/4 1/8 11.484 11.762 0.139 1 0.01

•C1CF43 A-278 -278 12 12-1/4 1/8 11.984 12.262 0.139 1 0.01

•C1CF47 A-282 -282 16 16-1/4 1/8 15.955 16.233 0.139 1 0.01

•C1CF52 A-311 -311 9/16 15/16 3/16 0.537 0.957 0.21 50 0.01

•C1CF53 A-312 -312 5/8 1 3/16 0.600 1.020 0.21 50 0.01

•C1CF54 A-313 -313 11/16 1-1/16 3/16 0.662 1.082 0.21 50 0.01

•C1CF55 A-314 -314 3/4 1-1/8 3/16 0.725 1.145 0.21 50 0.01

•C1CF56 A-315 -315 13/16 1-3/16 3/16 0.787 1.207 0.21 20 0.01

•C1CF57 A-316 -316 7/8 1-1/4 3/16 0.850 1.270 0.21 50 0.01

•C1CF59 A-318 -318 1 1-3/8 3/16 0.975 1.395 0.21 20 0.01

•C1CF60 A-319 -319 1-1/16 1-7/16 3/16 1.037 1.457 0.21 50 0.01

•C1CF61 A-320 -320 1-1/8 1-1/2 3/16 1.100 1.520 0.21 20 0.01

•C1CF62 A-321 -321 1-3/16 1-9/16 3/16 1.162 1.582 0.21 20 0.01


Dash Size

Nominal I.D.

Nominal O.D.


Actual Width

Pkg. Qty. Wt.

Price Each

Inch SizesO-Rings


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


•C1CF63 A-322 -322 1-1/4 1-5/8 3/16 1.225 1.645 0.21 20 0.01

•C1CF64 A-323 -323 1-5/16 1-11/16 3/16 1.287 1.707 0.21 10 0.01

•C1CF65 A-324 -324 1-3/8 1-3/4 3/16 1.350 1.770 0.21 20 0.01

•C1CF66 A-325 -325 1-1/2 1-7/8 3/16 1.475 1.895 0.21 20 0.01

•C1CF67 A-326 -326 1-5/8 2 3/16 1.600 2.020 0.21 20 0.01

•C1CF68 A-327 -327 1-3/4 2-1/8 3/16 1.725 2.145 0.21 20 0.01

•C1CF69 A-328 -328 1-7/8 2-1/4 3/16 1.850 2.270 0.21 20 0.01

•C1CF70 A-329 -329 2 2-3/8 3/16 1.975 2.395 0.21 20 0.01

•C1CF71 A-330 -330 2-1/8 2-1/2 3/16 2.100 2.520 0.21 20 0.01

•C1CF73 A-331 -331 2-1/4 2-5/8 3/16 2.225 2.645 0.21 20 0.01

•C1CF74 A-332 -332 2-3/8 2-3/4 3/16 2.350 2.770 0.21 20 0.01

•C1CF75 A-333 -333 2-1/2 2-7/8 3/16 2.475 2.895 0.21 20 0.01

•C1CF76 A-334 -334 2-5/8 3 3/16 2.600 3.020 0.21 20 0.01

•C1CF77 A-335 -335 2-3/4 3-1/8 3/16 2.725 3.145 0.21 10 0.01

•C1CF78 A-336 -336 2-7/8 3-1/4 3/16 2.850 3.270 0.21 10 0.01

•C1CF79 A-337 -337 3 3-3/8 3/16 2.975 3.395 0.21 10 0.01

•C1CF80 A-338 -338 3-1/8 3-1/2 3/16 3.100 3.520 0.21 10 0.01

•C1CF81 A-339 -339 3-1/4 3-5/8 3/16 3.225 3.645 0.21 10 0.01

•C1CF82 A-340 -340 3-3/8 3-3/4 3/16 3.350 3.770 0.21 10 0.01

•C1CF83 A-341 -341 3-1/2 3-7/8 3/16 3.475 3.895 0.21 4 0.01

•C1CF84 A-342 -342 3-5/8 4 3/16 3.600 4.020 0.21 4 0.01

•C1CF85 A-343 -343 3-3/4 4-1/8 3/16 3.725 4.145 0.21 4 0.01

•C1CF86 A-344 -344 3-7/8 4-1/4 3/16 3.850 4.270 0.21 4 0.01

•C1CF87 A-345 -345 4 4-3/8 3/16 3.975 4.395 0.21 4 0.01

•C1CF88 A-346 -346 4-1/8 4-1/2 3/16 4.100 4.520 0.21 4 0.01

•C1CF89 A-347 -347 4-1/4 4-5/8 3/16 4.225 4.645 0.21 4 0.01

•C1CF90 A-348 -348 4-3/8 4-3/4 3/16 4.350 4.770 0.21 4 0.01

•C1CF91 A-349 -349 4-1/2 4-7/8 3/16 4.475 4.895 0.21 4 0.01

•C1CF92 A-350 -350 4-5/8 5 3/16 4.600 5.020 0.21 4 0.01

•C1CF93 A-351 -351 4-3/4 5-1/8 3/16 4.725 5.145 0.21 4 0.01

•C1CF94 A-352 -352 4-7/8 5-1/4 3/16 4.850 5.270 0.21 4 0.01

•C1CF95 A-353 -353 5 5-3/8 3/16 4.975 5.395 0.21 4 0.01

•C1CF96 A-354 -354 5-1/8 5-1/2 3/16 5.100 5.520 0.21 4 0.01

•C1CF97 A-355 -355 5-1/4 5-5/8 3/16 5.225 5.645 0.21 4 0.01

•C1CF98 A-356 -356 5-3/8 5-3/4 3/16 5.350 5.770 0.21 4 0.01

•C1CF99 A-357 -357 5-1/2 5-7/8 3/16 5.475 5.895 0.21 4 0.01

•C1CG11 A-358 -358 5-5/8 6 3/16 5.600 6.020 0.21 4 0.01

•C1CG12 A-359 -359 5-3/4 6-1/8 3/16 5.725 6.145 0.21 4 0.01

•C1CG13 A-360 -360 5-7/8 6-1/4 3/16 5.850 6.270 0.21 4 0.01

•C1CG15 A-362 -362 6-1/4 6-5/8 3/16 6.225 6.645 0.21 4 0.01

•C1CG16 A-363 -363 6-1/2 6-7/8 3/16 6.475 6.895 0.21 4 0.01

•C1CG17 A-364 -364 6-3/4 7-1/8 3/16 6.725 7.145 0.21 4 0.01

•C1CG19 A-366 -366 7-1/4 7-5/8 3/16 7.225 7.645 0.21 2 0.01

•C1CG20 A-367 -367 7-1/2 7-7/8 3/16 7.475 7.895 0.21 2 0.01

•C1CG31 A-378 -378 10-1/2 10-7/8 3/16 10.475 10.895 0.21 1 0.01

•C1CG49 A-425 -425 4-1/2 5 1/4 4.475 5.025 0.275 4 0.01

•C1CG50 A-426 -426 4-5/8 5-1/8 1/4 4.600 5.150 0.275 4 0.01

•C1CG51 A-427 -427 4-3/4 5-1/4 1/4 4.725 5.275 0.275 4 0.01

•C1CG52 A-428 -428 4-7/8 5-3/8 1/4 4.850 5.400 0.275 4 0.01


Dash Size

Nominal I.D.

Nominal O.D.


Actual Width

Pkg. Qty. Wt.

Price Each

Inch SizesO-Rings


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



•C1CG53 A-429 -429 5 5-1/2 1/4 4.975 5.525 0.275 4 0.01

•C1CG56 A-432 -432 5-3/8 5-7/8 1/4 5.350 5.900 0.275 4 0.01

•C1CG57 A-433 -433 5-1/2 6 1/4 5.475 6.025 0.275 4 0.01

•C1CG58 A-434 -434 5-5/8 6-1/8 1/4 5.600 6.150 0.275 4 0.01

•C1CG59 A-435 -435 5-3/4 6-1/4 1/4 5.725 6.275 0.275 4 0.01

•C1CG60 A-436 -436 5-7/8 6-3/8 1/4 5.850 6.400 0.275 4 0.01

•C1CG61 A-437 -437 6 6-1/2 1/4 5.975 6.525 0.275 2 0.01

•C1CG62 A-438 -438 6-1/4 6-3/4 1/4 6.225 6.775 0.275 2 0.01

•C1CG63 A-439 -439 6-1/2 7 1/4 6.475 7.025 0.275 2 0.01

•C1CG64 A-440 -440 6-3/4 7-1/4 1/4 6.725 7.275 0.275 2 0.01

•C1CG65 A-441 -441 7 7-1/2 1/4 6.975 7.525 0.275 2 0.01

•C1CG67 A-443 -443 7-1/2 8 1/4 7.475 8.025 0.275 2 0.01

•C1CG70 A-446 -446 8-1/2 9 1/4 8.475 9.025 0.275 2 0.01

•C1CG72 A-448 -448 9-1/2 10 1/4 9.475 10.025 0.275 2 0.01

•C1ET94 568-450 -450 10-1/2 11 1/4 10.475 11.025 0.275 1 0.01

90 Durometer Buna-N O-Rings

Material: 90 Durometer Buna-N. Temperature Range: -40°F . to 240°F.


Dash Size

Nominal I.D.

Nominal O.D.


Actual Width

Pkg. Qty. Wt.

Price Each

•C1FA96 A-012-90D -012 3/8 1/2 1/16 0.364 0.504 0.070 34 0.01

•C1CD18 A-014-90D -014 1/2 5/8 1/16 0.489 0.629 0.070 34 0.01

•C1CE57 A-210-90D -210 3/4 1 1/8 0.734 1.012 0.139 25 0.01

•C1FF85 A-212-90D -212 7/8 1-1/8 1/8 0.859 1.137 0.139 25 0.01

•C1CE63 A-214-90D -214 1 1-1/4 1/8 0.984 1.262 0.139 23 0.01

•C1CE69 A-219-90D -219 1-5/16 1-9/16 1/8 1.296 1.574 0.139 19 0.01

•C1CE73 A-222-90D -222 1-1/2 1-3/4 1/8 1.484 1.762 0.139 19 0.01

•C1CE77 A-225-90D -225 1-7/8 2-1/8 1/8 1.859 2.137 0.139 2 0.05


Dash Size

Nominal I.D.

Nominal O.D.


Actual Width

Pkg. Qty. Wt.

Price Each

Inch SizesO-Rings


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


90A Durometer Urethane Back-Up RingsCatalog Part No.

Model Number

Dash Size Type

Pkg. Qty Wt.

Price Each

•C1BT73 575-011 -011 Urethane 10 0.01

•C1BT74 575-012 -012 Urethane 10 0.01

•C1BT76 575-014 -014 Urethane 10 0.01

•C1BT77 575-015 -015 Urethane 10 0.01

•C1BT78 575-016 -016 Urethane 10 0.01

•C1BT79 575-017 -017 Urethane 10 0.01

•C1BT80 575-018 -018 Urethane 10 0.01

•C1BT82 575-020 -020 Urethane 10 0.01

•C1BT83 575-021 -021 Urethane 10 0.01

•C1BT84 575-022 -022 Urethane 10 0.01

•C1BT91 575-029 -029 Urethane 10 0.01

•C1BT92 575-030 -030 Urethane 10 0.01

•C1KK48 575-038 -038 Urethane 10 0.01

•C1BT98 575-110 -110 Urethane 9 0.01

•C1BT99 575-111 -111 Urethane 9 0.01

•C1BU11 575-112 -112 Urethane 9 0.01

•C1BU12 575-113 -113 Urethane 9 0.01

•C1BU13 575-114 -114 Urethane 9 0.01

•C1BU14 575-115 -115 Urethane 9 0.01

•C1BU15 575-116 -116 Urethane 9 0.01

•C1BU16 575-117 -117 Urethane 9 0.01

•C1BU17 575-118 -118 Urethane 9 0.01

•C1BU18 575-119 -119 Urethane 9 0.01

•C1BU19 575-120 -120 Urethane 8 0.01

•C1BU20 575-121 -121 Urethane 8 0.01

•C1BU21 575-122 -122 Urethane 8 0.01

•C1BU23 575-124 -124 Urethane 8 0.01

•C1BU24 575-125 -125 Urethane 8 0.01

•C1BU25 575-126 -126 Urethane 8 0.01

•C1BU26 575-127 -127 Urethane 8 0.01

•C1BU27 575-128 -128 Urethane 8 0.01

•C1BU28 575-129 -129 Urethane 8 0.01

•C1BU31 575-132 -132 Urethane 8 0.01

•C1BU32 575-133 -133 Urethane 8 0.01

•C1BU34 575-135 -135 Urethane 8 0.01

•C1BU35 575-136 -136 Urethane 8 0.01

•C1BU36 575-137 -137 Urethane 8 0.01

C1KK49 575-140 -140 Urethane 10 0.01

•C1BU38 575-141 -141 Urethane 7 0.01

•C1BU42 575-145 -145 Urethane 6 0.01

•C1BU43 575-149 -149 Urethane 6 0.01

•C1BU44 575-151 -151 Urethane 6 0.01

•C1BU47 575-154 -154 Urethane 3 0.01

•C1BU48 575-155 -155 Urethane 3 0.01

•C1BU49 575-157 -157 Urethane 3 0.01

•C1BU54 575-208 -208 Urethane 10 0.01

•C1BU55 575-209 -209 Urethane 9 0.01

•C1BU56 575-210 -210 Urethane 9 0.01

•C1BU57 575-211 -211 Urethane 9 0.01

•C1BU58 575-212 -212 Urethane 9 0.01

•C1BU59 575-213 -213 Urethane 9 0.01

•C1BU60 575-214 -214 Urethane 9 0.01

•C1BU61 575-215 -215 Urethane 9 0.01

•C1BU62 575-216 -216 Urethane 9 0.01

•C1BU63 575-217 -217 Urethane 9 0.01

•C1BU64 575-218 -218 Urethane 9 0.01

•C1BU65 575-219 -219 Urethane 9 0.01

•C1BU66 575-220 -220 Urethane 10 0.01

•C1BU67 575-221 -221 Urethane 10 0.01

•C1BU68 575-222 -222 Urethane 10 0.01

•C1BU69 575-223 -223 Urethane 8 0.01

•C1BU70 575-224 -224 Urethane 8 0.01


Model Number

Dash Size Type

Pkg. Qty Wt.

Price Each

Back-Up Rings

Features: Urethane Models: Molded of 90A durometer urethane, these back-up rings provide excellent extrusion resistance. Stretched for installation, they return quickly to their original size for easy installation. Teflon® Models: Available in Solid (T suffix), Split (ST suffix) and Spiral Cut (TS suffix).

Temperature Range: Urethane Models: -65°F to 220°F. Teflon® Models: -40°F to 500°F.Note: Sizes correspond to O-Ring sizes. Price shown is for each individual back-up ring, not for package.

Inch SizesBack-Up Rings


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



•C1BU71 575-225 -225 Urethane 10 0.01

•C1BU72 575-226 -226 Urethane 10 0.01

•C1BU73 575-227 -227 Urethane 10 0.01

•C1BU74 575-228 -228 Urethane 10 0.01

•C1BU75 575-229 -229 Urethane 10 0.01

•C1BU76 575-230 -230 Urethane 7 0.01

•C1BU77 575-231 -231 Urethane 7 0.01

•C1BU78 575-232 -232 Urethane 7 0.01

•C1BU79 575-233 -233 Urethane 7 0.01

•C1BU81 575-234 -234 Urethane 6 0.01

•C1BU82 575-235 -235 Urethane 6 0.01

•C1BU83 575-236 -236 Urethane 6 0.01

•C1BU84 575-237 -237 Urethane 5 0.01

•C1BU85 575-238 -238 Urethane 5 0.01

•C1BU86 575-239 -239 Urethane 5 0.01

•C1BU87 575-240 -240 Urethane 5 0.01

•C1BU88 575-241 -241 Urethane 5 0.01

•C1BU89 575-242 -242 Urethane 5 0.01

•C1BU90 575-243 -243 Urethane 5 0.01

•C1BU91 575-244 -244 Urethane 4 0.01

•C1BU92 575-245 -245 Urethane 4 0.01

•C1BU93 575-246 -246 Urethane 3 0.01

•C1BU94 575-247 -247 Urethane 3 0.01

•C1BU95 575-248 -248 Urethane 3 0.01

•C1BU96 575-249 -249 Urethane 3 0.01

•C1BU99 575-252 -252 Urethane 3 0.01

•C1BV11 575-253 -253 Urethane 3 0.01

•C1BV12 575-254 -254 Urethane 3 0.01

•C1BV13 575-255 -255 Urethane 2 0.01

•C1BV14 575-256 -256 Urethane 2 0.01

•C1BV16 575-258 -258 Urethane 2 0.01

•C1BV17 575-259 -259 Urethane 2 0.01

•C1BV18 575-260 -260 Urethane 2 0.01

•C1BV19 575-261 -261 Urethane 2 0.01

•C1BV20 575-262 -262 Urethane 2 0.01

•C1BV25 575-314 -314 Urethane 8 0.01

•C1BV27 575-316 -316 Urethane 8 0.01

•C1BV32 575-321 -321 Urethane 8 0.01

•C1BV33 575-324 -324 Urethane 8 0.01

•C1BV34 575-325 -325 Urethane 8 0.01

•C1BV35 575-326 -326 Urethane 8 0.01

•C1BV36 575-327 -327 Urethane 8 0.01

•C1BV37 575-328 -328 Urethane 8 0.01

•C1BV38 575-329 -329 Urethane 8 0.01

•C1BV39 575-330 -330 Urethane 8 0.01

•C1BV40 575-331 -331 Urethane 8 0.01

•C1BV41 575-332 -332 Urethane 8 0.01

•C1BV42 575-333 -333 Urethane 8 0.01

•C1BV43 575-334 -334 Urethane 7 0.01


Model Number

Dash Size Type

Pkg. Qty Wt.

Price Each

•C1BV44 575-335 -335 Urethane 7 0.01

•C1BV45 575-336 -336 Urethane 7 0.01

•C1BV46 575-337 -337 Urethane 7 0.01

•C1BV47 575-338 -338 Urethane 7 0.01

•C1BV48 575-339 -339 Urethane 6 0.01

•C1BV49 575-340 -340 Urethane 6 0.01

•C1BV50 575-341 -341 Urethane 6 0.01

•C1BV51 575-342 -342 Urethane 5 0.01

•C1BV53 575-344 -344 Urethane 4 0.01

•C1BV54 575-345 -345 Urethane 4 0.01

•C1BV55 575-346 -346 Urethane 4 0.01

•C1BV56 575-347 -347 Urethane 4 0.01

•C1BV57 575-348 -348 Urethane 4 0.01

•C1BV58 575-349 -349 Urethane 3 0.01

•C1BV59 575-350 -350 Urethane 3 0.01

•C1BV64 575-358 -358 Urethane 2 0.01

•C1BV67 575-425 -425 Urethane 3 0.01

•C1BV68 575-427 -427 Urethane 3 0.01

•C1BV69 575-429 -429 Urethane 3 0.01

•C1BV71 575-432 -432 Urethane 2 0.01

•C1BV72 575-433 -433 Urethane 2 0.01

•C1BV73 575-434 -434 Urethane 2 0.01

•C1BV74 575-436 -436 Urethane 2 0.01

•C1BV77 575-439 -439 Urethane 2 0.01


Model Number

Dash Size Type

Pkg. Qty Wt.

Price Each

Inch SizesBack-Up Rings


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Spiral External Retainer Rings

Spiral External Retainer RingsCatalog Part No. Model Number

Free I.D. A (in)

Thickness B (in)

Radial Wall C (in)

Shaft Dia. D (in)

Groove Dia. E (in)

Groove Width F (in) Wt.

Price Each

•C1DT58 WST-500 4.755 0.111 0.250 5.000 4.790 0.120 0.25

Seal Aligning Bearings

Seal Aligning BearingsCatalog Part No. Model Number A (in) B (in) W (in) C (in) D (in) Wt.

Price Each

•C1GG21 HH200ES 2 3.187 1.750 1.500 2.266 2.02

Inch Sizes


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Metric Urethane Rod U-Seals

Material: Urethane. Temperature Range: -65°F to 220°F. Pressure Range: 0 to 5000 PSI.

Metric Urethane Rod U-SealsCatalog Part No. Model Number

I.D. (mm)

O.D. (mm)

H (mm) Wt.

Price Each

C1ZT15 MRTU-32X40X6 32.0 40.0 6.0 0.01

Metric Sizes


Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Catalog Part No. Model Number Description Wt.

Price Each

•C1BT64 568-KITKit contains 436 Buna-N 70 Durometer O-Rings in 36 different sizes.

0.90

Kit Contains: 005-011 (25), 012 (15), 013-018 (10), 110 (15), 111-116 (10), 117-121 (7), 210-211 (10), 212-219 (7)


Price Each

•C1ZT80 568-FC-KITKit contains 436 Viton® (Fluorocarbon) 75 Durometer O-Rings in 36 different sizes.

1.03

Kit Contains: 005-011 (25), 012 (15), 013-018 (10), 110 (15), 111-116 (10), 117-121 (7), 210-211 (10), 212-219 (7)


Price Each

•C1CA71 900-BOSS-KITKit contains 250 Buna-N 90 Durometer O-Rings in 12 different sizes.

0.61

Kit Contains: 904 (35), 905-906 (30), 907-910 (20), 911-914 (15), 916 (15)


Price Each

•C1DJ32 QUAD-KIT Kit contains 226 Buna-N Quad Seals in 36 different sizes. 0.68

Kit Contains: 4005-4012 (10), 4013-4016 (6), 4017-4018 (5), 4110-4116 (6), 4117-4121 (4), 4210-4219 (5)

O-Ring Kit (Buna-N)

O-Ring Kit (Viton®)

Straight Thread O-Ring Kit

Quad Ring Kit

Assortment Kits & Tools


Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &




Price Each

•C1BT62 568-FACE-KITKit contains 155 Buna-N 90 Durometer O-Rings in 8 different sizes.

0.75

Kit Contains: 011 (25), 012 (25), 014 (25), 016 (25), 018 (20), 021 (15), 025 (10), 029 (10)


Price Each

•C1BT63 568-FLANGE-KITKit contains 70 Buna-N 90 Durometer O-Rings in 7 different sizes.

0.75

Kit Contains: 210 (10), 214 (10), 219 (10), 222 (10), 225 (10), 228 (10), 232 (10)


Price Each

•C1EW63 CTC-4C4784Kit contains the 9 most popular sized D-Rings used on Caterpillar equipment.

1.87


Price Each

•C1DE79 METRIC-O-KIT-J

Kit contains 380 Buna-N 70 Durometer Metric O-Rings in 36 of the most popular Japanese metric sizes.

0.90

Kit Contains Following, I.D. mm x Cross Section mm (Qty): 2.8 x 1.9 (25), 3.8 x 1.9 (20), 4.8 x 1.9 (20), 5.8 x 1.9 (20), 6.8 x 1.9 (15), 7.8 x 1.9 (15), 8.8 x 1.9 (15), 9.8 x 1.9 (15), 9.8 x 2.4 (15), 10.8 x 2.4 (15), 11.0 x 2.4 (15), 11.8 x 2.4 (12), 12.8 x 2.4 (12), 13.8 x 2.4 (12), 14.8 x 2.4 (12), 15.8 x 2.4 (12), 17.8 x 2.4 (8), 19.8 x 2.4 (8), 20.8 x 2.4 (8), 21.8 x 2.4 (8), 24.4 x 3.1 (6), 29.4 x 3.1 (7), 21.7 x 3.5 (5), 22.1 x 3.5 (5), 23.7 x 3.5 (7), 24.7 x 3.5 (7), 25.2 x 3.5 (7), 25.7 x 3.5 (7), 27.7 x 3.5 (7), 28.7 x 3.5 (6), 29.2 x 3.5 (6), 29.7 x 3.5 (6), 30.7 x 3.5 (6), 31.2 x 3.5 (6), 14.5 x 4.0 (4), 23.5 x 4.0 (6)

O-Ring Face Seal Kit

Flange O-Ring Kit

Caterpillar D-Ring Kit

Metric O-Ring KitCommon Japanese Sizes



Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion



Price Each

•C1DE78 METRIC-O-KIT-E

Kit contains 500 Buna-N 70 Durometer Metric O-Rings in 36 of the most popular European metric sizes.

0.67

Kit Contains Following, I.D. mm x Cross Section mm (Qty): 5.0 x 1.5 (20), 13.0 x 1.5 (15), 16.0 x 1.5 (10), 2.2 x 1.6 (20), 3.1 x 1.6 (20), 4.1 x 1.6 (20), 7.1 x 1.6 (20), 9.1 x 1.6 (15), 10.1 x 1.6 (15), 13.1 x 1.6 (15), 4.0 x 2.0 (20), 8.0 x 2.0 (15), 9.0 x 2.0 (15), 10.0 x 2.0 (15), 12.0 x 2.0 (15), 14.0 x 2.0 (10), 16.0 x 2.0 (10), 19.0 x 2.0 (10), 20.0 x 2.0 (10), 4.3 x 2.4 (15), 5.3 x 2.4 (15), 5.6 x 2.4 (15), 6.0 x 2.4 (20), 7.6 x 2.4 (15), 8.3 x 2.4 (15), 8.6 x 2.4 (15), 10.0 x 2.5 (10), 13.0 x 2.5 (10), 14.0 x 2.5 (10), 15.0 x 2.5 (10), 17.0 x 2.5 (10), 18.0 x 2.5 (10), 19.0 x 2.5 (10), 10.0 x 3.0 (10), 11.0 x 3.0 (10), 9.0 x 3.0 (10)


Price Each

•C1BT65 568-SPLICE-KIT

Kit contains stock of Buna-N 70 Durometer O-Ring Cord, Razor Blade, Splicing Tool and Tube of Adhesive.

1.04


Price Each

•C1DE77 MET/INCH-SPLICE-

Kit can produce O-Rings of any standard inch size cross section plus a wide variety of metric sizes. Kit contains 14 lengths of Buna-N 70 Durometer O-Ring Cord, Razor Blade, Cutting & Splicing Tool and Tube of Adhesive.

1.16

Kit Contains: Inch Cross Sections: 1/16, 3/32, 1/8, 3/16, 1/4. Metric Cross Sections (mm): 1.5, 2.0, 2.5, 3.0, 3.5, 4.0, 5.0, 5.7, 8.4


Price Each

•C1BV86 575-KITKit contains 475 Urethane Back-Up Rings in 24 of the most popular sizes.

1.83

Kit Contains: 111-116 (25), 210-216 (25), 217-224 (15), 325-327 (10)

Metric O-Ring KitCommon European Sizes

O-Ring Splice KitInch Sizes

O-Ring Splice KitMetric & Inch Sizes

Urethane Back-Up Ring Kit



Seals

Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &




Price Each

•C1ET95 575-PTFE-KIT-S

Kit contains 325 Urethane Back-Up Rings in 36 of the most popular sizes. Rings are scarf cut to facilitate installation.

0.66

Kit Contains: 005-012 (15), 013-018 (10), 110-116 (10), 117-121 (5), 210-219 (5)

Teflon® Back-Up Ring Kit



Seals

Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Hyco 70,000 Series Single Acting Telescopic Cylinder Parts

Packing: Normally uses urethane u-seals, but may be retrofitted with vee packing. All sizes are 1/4 inch cross section.

Wipers: Urethane snap-in type. Bearings: Nylon bearings. Outer bearing is flat on the top & bottom. Inner bearing is trapped between two

retainers. The bottom side of the inner bearing is step-cut on the OD to pilot over snap ring. Cross section is 0.245 inches.

Piston: Welded to stage. Uses 2 replaceable wear rings per stage. Stage OD's: 3, 4, 5, 6, 7, 8-1/8, 9-3/8. Special Info: Spring steel type snap ring serves as internal stop. Uses a spiral retainer to trap lower bearing. Identification: Cylinder model number & serial number stamped on cylinder body near base. Note: 70,000 Series single action cylinders are manufactured using urethane u-seals but may be retrofitted with a

vee packing set if desired. Three types of packing kits are offered. Type 1 kits are identical to the original Hyco packing sets and utilize Parker u-seals. Type 2 kits are also identical to the original Hyco packing sets but contain a lower cost Hallite manufactured u-seal. Type 3 kits contain a vee packing set retrofit for the original u-seal packing. The vee packing can be more effective in sealing an older cylinder with abrasive scoring or other surface blemishes.

Important: When ordering Hyco telescopic parts, please provide the model number & serial number.

Hyco 70,000 Series Single Acting Telescopic Cylinder PartsCatalog Part No. Model Number Description Wt.

Price Each

•C1CY90 HY-A2688 Manual Bleeder Valve 0.02

Cylinder Kits & Parts



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Felsted High Performance Control Cables

Felsted cables, controls and control systems are used to control such items as PTO's, manual and automatic transmissions, hydraulic valves, clutches, throttles or accelerators, engine shut-offs, and brakes. Our locations equipped to manufacture cables from stock components are Miami Springs, West Palm Beach, Fort Lauderdale, Belle Glade and Atlanta.Core Construction: Hi-Performance (HP) 1 x 7 coated core is available in 3, 4 and 6 series cables. HP Core utilizes a proprietary coating over 1 x 7 wire rope which offers improved flexibility and higher push loads than armor core construction. Solid stainless steel cores are available in 3 Series Push-Pull, Universal and PTO cables.

Liners: All cables utilize polymer liners which have a temperature rating of -65°F to 225°F. Factory lubrication provides optimum core performance without requiring further service.

Stranded Conduit: Multiple, oil tempered spring wires are placed in a long lay pattern to protect the liner and inner core, maintain flexibility and withstand extreme compressive and tensile loads. This long lay construction results in minimal deflections during cable operation, assuring precise controlling action to the operator.

Conduit Jacket: Heavy duty, thick-walled polymer jackets are extruded onto the stranded liner for maximum cable strength. Standard material is HDPE molded to a dark maroon color.

End Fittings: Corrosion resistant materials are used throughout to provide maximum life. Standard 3, 4 and 6 series rods and sleeves are 300 series stainless steel, while hubs are either aluminum or stainless.

Seals & Boots: Durable custom compounded seals are used to prevent moisture and contaminants from entering the cable.

Rod & Sleeve Bearing: An exclusive polymer rod and sleeve bearing is used to improve efficiency, sealing and cable life by preventing metal to metal contact between the rod and sleeve. They also accurately align the rod with the seal to insure superior sealing and a long cable life.

Push-Pull Cables - 3 Series Push Loads To 80 lbs • Pull Loads To 120 lbs

Cores: Choice of either solid stainless core or HP core. (HP core offers improved flexibility and higher push loads).

Hubs: Each cable assembly has (2) Hubs, which can be the same on each end, or different. Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.

Minimum Bend Radius: 3 Inches (HP Core), 6 Inches (Solid Core). Hardware: page 1374

Control Cables



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Push-Pull Cables - 3 Series • Push Loads To 80 lbs • Pull Loads To 120 lbs

Catalog Part No. Felsted Model

Travel (in)

O.A. Length

(in) Core Hubs

Push Rating (lbs)

Pull Rating (lbs)

A (in)

B (in)

C (in)

D (in) Wt.

Price Each

N/A MTO-1INCH 1 MTO MTO MTO 80(HP) 60(Solid)

120(HP) 60(Solid) 3.00 4.44 2.31 3.75


120(HP) 60(Solid) 4.00 5.94 3.31 5.25


120(HP) 60(Solid) 5.00 7.44 4.31 6.75


120(HP) 60(Solid) 6.00 8.94 5.31 8.25

MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material and Hub configuration.


Core: HP Core. Hubs: Each cable assembly has (2) Hubs, which can be the same on each end, or different. Hub styles stocked

are Bulkhead (aluminum or stainless), Clamp (aluminum or stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.

Minimum Bend Radius: 5 Inches. Hardware: page 1374



Travel (in)

O.A. Length

(in) Hubs

Push Rating (lbs)

Pull Rating (lbs) A (in) B (in) C (in) D (in) Wt.

Price Each

N/A MTO-1INCH 1 MTO MTO 150 230 3.13 4.69 2.50 4.06





C1JF25 100-4323-0213-1 3 213 Bulkhead / Clamp 115 230 5.13 7.69 4.50 7.06 2.50

MTO Models: Made-To-Order in specified Travel, O.A. Length and Hub configuration.

Control Cables



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &




Core: HP Core. Hubs: Each cable assembly has (2) Hubs, which can be the same on each end, or different. Hub styles stocked

are Bulkhead (aluminum), Clamp (aluminum) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.




Travel (in)

O.A. Length

(in) Hubs

Push Rating (lbs)

Pull Rating (lbs)

A (in)

B (in)

C (in)

D (in) Wt.

Price Each






Control Cables



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion



Core: Armor Core. Hubs: Each cable assembly has (2) Hubs, which can be the same on each end, or different. Hub styles stocked

are Bulkhead (aluminum) and Clamp (aluminum). Minimum Bend Radius: 10 Inches. Hardware: page 1374



Travel (in)

O.A. Length

(in) Hubs

Push Rating (lbs)

Pull Rating (lbs)

A (in) B (in)

C (in)

D (in) Wt.

Price Each






Control Cables



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Universal Cables - 3 Series Light Duty

Core: Choice of either solid stainless core or HP core. (Stainless core offers increased durability, since the core is exposed. HP core offers improved flexibility).

Hubs: Each cable assembly has a Utility Hub (aluminum) on one end, and has a Specified Hub or Plain other end. Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.

Minimum Bend Radius: 3 Inches (HP Core), 6 Inches (Solid Core). Hardware & Knobs: page 1374

Universal Cables - 3 Series Light Duty


Travel (in)

O.A. Length

(in) Core HubAA (in)

BB (in) Wt.

Price Each

N/A MTO-3INCH 3 MTO MTO MTO 4.50 5.00

MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material and Plain End or Hub choice.

Control Cables



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Universal Cables - 3 Series Heavy Duty Push Loads To 60 lbs • Pull Loads To 60 lbs

Core: Choice of either solid stainless core or HP core. (HP core offers improved flexibility and higher push loads). Hubs: Each cable assembly has a Utility Hub (aluminum) on one end, and has a Specified Hub other end.

Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.

Minimum Bend Radius: 3 Inches (HP Core), 6 Inches (Solid Core). Hardware & Knobs: page 1374

Universal Cables - 3 Series Heavy Duty • Push Loads To 60 lbs • Pull Loads To 60 lbs


Travel (in)

O.A. Length

(in) Core Hub

Push Rating (lbs)

Pull Rating (lbs)

AA (in)

A (in)

B (in)

C (in)

D (in) Wt.

Price Each


60(HP) 60(Solid) 4.50 5.00 8.94 4.31 8.25

MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material and Hub choice.

Control Cables



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Universal Cables - 4 Series Push Loads To 120 lbs • Pull Loads To 120 lbs

Core: HP Core. Hubs: Each cable assembly has a Utility Hub (aluminum) on one end, and has a Specified Hub other end.

Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (aluminum or stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.

Minimum Bend Radius: 5 Inches. Hardware & Knobs: page 1374

Universal Cables - 4 Series • Push Loads To 120 lbs • Pull Loads To 120 lbs


Travel (in)

O.A. Length

(in) Core Hub

Push Rating (lbs)

Pull Rating (lbs)

AA (in)

A (in)

B (in)

C (in)

D (in) Wt.

Price Each

N/A MTO-3INCH 3 MTO HP MTO 100 120 5.19 5.13 9.19 4.50 8.56

MTO Models: Made-To-Order in specified Travel, O.A. Length and Hub choice.

Control Cables



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Universal Cables - 6 Series Push Loads To 225 lbs • Pull Loads To 225 lbs

Core: HP Core. Hubs: Each cable assembly has a Utility Hub (aluminum) on one end, and has a Specified Hub other end.

Specified Hub styles stocked are Bulkhead (aluminum), Clamp (aluminum) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.

Minimum Bend Radius: 7 Inches. Hardware & Knobs: page 1374

Universal Cables - 6 Series • Push Loads To 225 lbs • Pull Loads To 225 lbs


Travel (in)

O.A. Length

(in) Core Hub

Push Rating (lbs)

Pull Rating (lbs)

AA (in)

A (in)

B (in)

C (in)

D (in) Wt.

Price Each

N/A MTO-3INCH 3 MTO HP MTO 200 225 5.19 5.25 9.50 4.56 8.81

MTO Models: Made-To-Order in specified Travel, O.A. Length and Hub choice.

Control Cables



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Quick Disconnect Cables - 3 Series Light Duty Push Loads To 20 lbs • Pull Loads To 20 lbs

Cores: Choice of either solid stainless core or HP core. (Stainless core offers increased durability, since the core is exposed. HP core offers improved flexibility).

Head: Each cable assembly has either a Vernier (aluminum) or Positive Lock Head (aluminum). Vernier Head is ideal for any application requiring coarse or fine adjustment. Positive Lock Head features a T handle that locks the setting when rotated 90°.

Hub: Each cable assembly has either a Specified Hub or a Plain end. Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.


Quick Disconnect Cables - 3 Series Light Duty • Push Loads To 20 lbs • Pull Loads To 20 lbs


Travel (in)

O.A. Length

(in) Head Core Hub

Push Rating (lbs)

Pull Rating (lbs) Wt.

Price Each

N/A MTO-3INCH 3 MTO MTO MTO MTO 20(HP) 20(Solid)

20(HP) 20(Solid)

MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material, Head, and Plain End or Hub choice.

Control Cables



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Quick Disconnect Cables - 3 Series Heavy Duty Push Loads To 20 lbs • Pull Loads To 20 lbs

Core: Choice of either solid stainless core or HP core. (HP core offers improved flexibility and higher push loads). Head: Each cable assembly has either a Vernier (aluminum) or Positive Lock Head (aluminum). Vernier Head is

ideal for any application requiring coarse or fine adjustment. Positive Lock Head features a T handle that locks the setting when rotated 90°.

Hub: Each cable assembly has a Specified Hub. Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.


Quick Disconnect Cables - 3 Series Heavy Duty • Push Loads To 20 lbs • Pull Loads To 20 lbs


Travel (in)

O.A. Length

(in) Head Hub

Push Rating (lbs)

Pull Rating (lbs)

A (in)

B (in)

C (in)

D (in) Wt.

Price Each


20(HP) 20(Solid) 5.00 8.94 4.31 8.25

MTO Models: Made-To-Order in specified Travel, O.A. Length, Core material, Head and Hub choice.

Control Cables



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Quick Disconnect Cables - 4 Series Push Loads To 20 lbs • Pull Loads To 20 lbs

Core: HP Core. Head: Each cable assembly has either a Vernier (aluminum) or Positive Lock Head (aluminum). Vernier Head is

ideal for any application requiring coarse or fine adjustment. Positive Lock Head features a T handle that locks the setting when rotated 90°.

Hub: Each cable assembly has a Specified Hub. Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (aluminum or stainless) and Bulkhead/Clamp Combo (aluminum). The Bulkhead/Clamp Combo Hub is a flexible solution for applications where exact hub type needed is unknown.


Quick Disconnect Cables - 4 Series • Push Loads To 20 lbs • Pull Loads To 20 lbs


Travel (in)

O.A. Length

(in) Head Hub

Push Rating (lbs)

Pull Rating (lbs)

A (in)

B (in)

C (in)

D (in) Wt.

Price Each

N/A MTO-3INCH 3 MTO MTO MTO 20 20 5.13 9.19 4.50 8.56

MTO Models: Made-To-Order in specified Travel, O.A. Length, Head and Hub choice.

Control Cables



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Power Take Off (PTO) Cables Push Loads To 50 lbs • Pull Loads To 50 lbs

Core: Solid stainless steel core. Minimum Bend Radius: 6 Inches. Hardware: page 1374

Power Take Off (PTO) Cables • Push Loads To 50 lbs • Pull Loads To 50 lbs


Travel (in)

O.A. Length

(in) Wt.Price Each

•C1EL17 000-35000-0120 5 120 1.75

Note: For O.A. Length shorter than 120 inches: (1) Remove core. (2) Cut conduit to length and deburr. (3) Install core. (4) Cut core to length and deburr.

Note: For O.A. Length longer than 120 inches, consider using a Universal Cable - 3 Series Light Duty, with a Plain end, and with a 30162 Red PTO Knob.

Control Cables



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Remote Valve Operation (RVO) Cables Push Loads To 100 lbs • Pull Loads To 230 lbs

Core: HP Core. Hub: Each cable assembly has a Valve Operator Hub which connects to a Felsted Remote Valve Control (Models

55700, 55709, 55786-1), and a Specified Hub. Specified Hub styles stocked are Bulkhead (aluminum or stainless), Clamp (aluminum or stainless) and Universal (aluminum). The Universal style hub is used with a Felsted Valve Connection Kit.


Remote Valve Operation (RVO) Cables • Push Loads To 100 lbs • Pull Loads To 230 lbs


Travel (in)

O.A. Length

(in) Hub

Push Rating (lbs)

Pull Rating (lbs) Wt.

Price Each

N/A MTO-4INCH 4 MTO MTO 100 230

MTO Models: Made-To-Order in specified O.A. Length and Hub choice.

Control Cables



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Cable Hardware & Knobs

Cable Hardware & KnobsCatalog Part No. Felsted Model Description Type A B C D E Wt.

Price Each

•C1EU91 39006 Ball Joint, 3 Series A 10-24 UNF-2B 15/32 9/16 1/4-28 UNF-2A 31/32 0.08

•C1ES22 000-49006-0000 Ball Joint, 4 Series A 1/4-28 UNF-2B 15/32 9/16 1/4-28 UNF-2A 31/32 0.08

•C1EZ29 000-49007-0000 Ball Joint, 4 Series A 1/4-28 UNF-2B 15/32 7/8 5/16-24 UNF-2A 31/32 0.10

•C1FE36 000-69007-0000 Ball Joint, 6 Series A 5/16-24 UNF-2B 17/32 11/16 5/16-24 UNF-2A 1-1/8 0.15

•C1EU33 39001 Clamp, 3 Series 3/8 1 13/64 1/2 1-1/2 0.01

•C1EZ80 49001 Clamp, 4 Series 1/2 1 7/32 1/2 1-1/2 0.02

•C1EW99 000-39003-0001 Clevis, 3 Series 10-32 UNF-2B 3/16 7/32 1 1-9/16 0.01

•C1EX89 000-49003-0002 Clevis, 3 Series 10-32 UNF-2B 1/4 9/32 1-1/4 2 0.08

•C1ER99 000-49003-0001 Clevis, 4 Series 1/4-28 UNF-2B 1/4 9/32 1-1/4 2 0.09

•C1EV29 000-69003-0003 Clevis, 4 Series 1/4-28 UNF-2B 5/16 11/32 1-7/16 2-1/4 0.12

•C1EW46 000-49003-0003 Clevis, 6 Series 5/16-24 UNF-2B 1/4 9/32 1-1/4 2 0.07

•C1EZ98 000-69003-0001 Clevis, 6 Series 5/16-24 UNF-2B 5/16 11/32 1-7/16 2-1/4 0.12

•C1EZ95 000-89003-0002 Clevis, 6 Series 5/16-24 UNF-2B 3/8 7/16 1-5/8 2-1/2 0.03

•C1ET99 39030-1 Field Clamp 0.20

•C1EU72 30162 Knob, PTO, Red 1/4-20 UNC-2B 0.15

•C1ZV18 49005-1011 Knob, Plain, Black 1/4-20 UNC-2B 0.10

C1KE82 49005-2011 Knob, Plain, Red 1/4-20 UNC-2B 0.02

•C1EN33 39011-1 Pivot, 3 Series B 7/64 1/4 5/32 5/16 9/16 0.02

•C1ZT92 39011-2 Pivot, 3 Series B 7/64 1/4 19/64 5/16 11/16 0.02

•C1EV97 000-49008-0001 Pivot, 4 Series A 1/4-28 UNF-2B 1/4 5/16 1/2 32/32 0.03

•C1EV95 000-49042-0000 Pivot, 4 Series A 1/4-28 UNF-2B 3/8 15/32 1/2 1-3/16 0.05

•C1EU76 39002 Shim, 3 & 4 Series 13/64 1 1/2 3/32 1-1/2 0.05

•C1EW27 30103 Stop Collar, 3 Series A 7/64 5/16 5/16 0.01

•C1EW98 000-49004-0003 Terminal Eye, 4 Series 1/4-28 UNF-2B 1/4 5/8 3/8 1-7/8 0.11

Control Cables



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



•C1EX90 000-49004-0001 Terminal Eye, 4 Series 1/4-28 UNF-2B 5/16 5/8 3/8 1-7/8 0.10

•C1EW11 000-69004-0004 Terminal Eye, 6 Series 5/16-24 UNF-2B 1/4 5/8 3/8 1-7/8 0.10

C1KH73 055887-000000 Control, Single Friction B 4.80

•C1KK29 40313-1 Hub, RVO 0.17

•C1KK27 40203-10 Hub, 4 Series, RVO 0.06

•C1KK26 40202 Sleeve, RVO 0.03

C1KG94 000-59112-0000 Kit 0.02

C1KG83 000-50036-0001 Switch/Pin Set 0.15

C1KK85 80016 Rod Bearing, 8 Series 0.01

•C1KK19 40004-5 Sleeve, 5" Travel 0.20

Salami Cable Remote Controls For Use with Salami Directional Control Valves

Cables: For use with Heavy Duty Cables. Handle Color: Matt black Operating Temperature: -40°F to 176°F

Salami Cable Remote Controls • For Use with Salami Directional Control ValvesCatalog Part No. Salami Model Stroke (in)

Max. Working Load (lb.) Lever Ratio

Detent in Neutral

Anti-Reverse Device Stackable Wt.

Price Each

C1MQ82 3360T3047 0.51 / 0.51 100 10:1 No No Yes

C1MQ83 3360T3076 0.51 / 0.51 100 10:1 No Yes Yes

C1MQ84 3360T3077 0.51 / 0.51 100 10:1 Yes No Yes

C1MQ81 3360T3046 0.63 / 0.63 100 8:1 Optional No No

Salami Cable Remote Controls Fixing KitsCatalog Part No. Part Number Description Wt.

Price Each

C1MQ85 3360T3095 Single lever fixing kit for Stackable Lever controls 3360T3076 and 3360T3077 - 1 Lever

C1MQ86 3360T3105 Single lever fixing kit for Stackable Lever controls 3360T3076 and 3360T3077 - 2 Lever 0.50



C1MQ89 3360T3108 Single lever fixing kit for Stackable Lever controls 3360T3076 and 3360T3077 - 5 Lever 1.00


Cable Hardware & KnobsCatalog Part No. Felsted Model Description Type A B C D E Wt.

Price Each

Control Cables



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


SAF-T-LOK® TPS Anaerobic Sealant

Features: White paste in squeeze tube. Seals and locks threaded joints on metal piping systems. Instant seal. Lubricates threads for alignment. Prevents vibration loosening. Resists most industrial chemicals and gasses.

Cure Time: Cures totally in 24 hours. Cure can be accelerated with SAF-T-LOK® primer. Operating Temperature Range: -100°F to 350°F. Note: Not for use on plastic pipe.

SAF-T-LOK® TPS Anaerobic SealantCatalog Part No. SAF-T-LOK Model Size Wt.

Price Each

•C1DM42 TPS-50 50 cc 0.16

•C1DM41 TPS-250 250 cc 0.61

Staybond™ S592 Anaerobic Sealant

Features: White paste in squeeze tube. Instantly seals threaded fittings. Lubricates threads. Prevents galling. Prevents vibration loosening. Resists oils and solvents.

Cure Time: Cures totally in 24 hours. Cure can be accelerated with Staybond primer. Operating Temperature Range: -65°F to 350°F. Note: Not for use on plastic pipe.

Staybond™ S592 Anaerobic SealantCatalog Part No. Staybond Model Size Wt.

Price Each

•C1DK64 S592-50 50 ml 0.15

•C1DK63 S592-250 250 ml 0.90

Staybond™ S569 Anaerobic Hydraulic Sealant

Features: Brown, low strength, medium viscosity liquid in bottle. Seals hydraulic fittings and locks mechanical fasteners. Strong resistance to most industrial chemicals. Prevents corrosion between parts.

Cure Time: Fixture tight in minutes. Full cure in 24 hours at 72°F.

Staybond™ S569 Anaerobic Hydraulic SealantCatalog Part No. Staybond Model Size Wt.

Price Each

•C1EX13 S569-50 50 ml 0.17

Thread Sealants



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



SAF-T-LOK® HS Anaerobic Hydraulic Sealant

Features: Brown, low strength, liquid in bottle. Seals hydraulic fittings and locks fine threads. Instant seal. Lubricates threads. Prevents vibration loosening.

Shear Strength: 1500-2500 PSI. Cure Time: Cures totally in 24 hours. Cure can be accelerated with SAF-T-LOK® primer or heat (200°F for 10 to

20 minutes). Operating Temperature Range: Note: Not for use on plastic pipe.

SAF-T-LOK® HS Anaerobic Hydraulic SealantCatalog Part No. SAF-T-LOK Model Size Wt.

Price Each

•C1CY68 HS-50 50 cc 0.15

Teflon® Tapes

Standard Teflon® Tape: Instantly seals threaded fittings. Lubricates threads. Prevents galling. Resists oils and solvents.

Pink Plumbers Tape: Superior, high density tape that is not stretched during manufacturing like ordinary Teflon® tape.

Unasco Gold Tape: A high density thread sealing tape for critical areas. For use on all metal pipe threaded joints where acids, alkalis, oils or solvents are present. Uses include sealing pipe threads on lines for natural gas, LP Gas, butane and propane. Tape is de-greased and can be used on oxygen lines. -450°F to 500°F temperature range.

Copper Anti-Seize Tape: Made from copper filled Teflon®. For general purpose anti-seize applications on most types of metal fasteners. Protects against corrosion, seizure, galling & carbon fusion, rust, galvanic pitting. -450°F to 2200°F temperature range.

Nickel Anti-Seize Tape: Made from nickel filled Teflon®. For anti-seize applications on stainless steel and aluminum. Protects against corrosion, seizure, galling & carbon fusion, rust, galvanic pitting. -450°F to 2400°F temperature range.

Oxygen Tape: Free of any residual petroleum fraction and is safe to use on oxygen systems. -450°F to 500°F temperature range.

Teflon® TapesCatalog Part No. Model Number Description Size (in) Wt.

Price Each

•C1DM23 TEFLONTAPE Standard Teflon® Tape (blue roll/white tape) 1/2 x 520 0.03

•C1EU45 APP104 Pink Plumbers Tape (orange roll/pink tape) 1/2 x 260 0.04

•C1EU48 ATG005 Unasco Gold Tape (gold roll/yellow tape) 1/2 x 540 0.01

•C1EU47 ATC001 Copper Anti-Seize Tape (brown roll/brown tape) 1/2 x 600 0.10

•C1EU49 ATS001 Nickel Anti-Seize Tape (silver roll/silver tape) 1/2 x 260 0.05

Thread Sealants



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


SAF-T-LOK® T70 Permanent Thread Lock

Features: Red liquid in squeeze bottle. Very high strength thread locking & sealing. Locks nuts and screws. Gap filling 0.002 - 0.008 inches. Shear strength 3000-4000 PSI. MIL-S-46163 Type I Grade K. ASTM D 5363 - AN9221.

Cure Time: Parts will be fixture tight within one hour. Full cure in 24 hours at 75° F.

SAF-T-LOK® T70 Permanent Thread LockCatalog Part No. SAF-T-LOK Model Size Wt.

Price Each

•C1ZX39 T70-50 50cc (1.7 fl.oz.) 0.15

Staybond™ T262 Permanent Bolt Lock

Features: Red liquid in squeeze bottle. High strength thread locking & sealing. MIL-S-46163 Type II Grade O. Cure Time: Parts will be fixture tight in minutes. Full cure in 24 hours at 72° F.

Staybond™ T262 Permanent Bolt LockCatalog Part No. Staybond Model Size Wt.

Price Each

•C1EX19 T262-50 50 ml (1.69 fl.oz.) 0.17

Allied Witan Filter Vents

With their low profile, these compact units are most often used as breather vent filters, easily inserted in cylinders, gear boxes, crank cases, storage tanks and other vessels wherever pressure equalization is required. Sintered metal filter.

Allied Witan Filter VentsCatalog Part No.

Allied Witan Model Thread

Length (in)

Hex (in) Wt.

Price Each

•C1CP37 F18 1/8 NPT 0.44 0.44 0.01

•C1CP48 F28 1/4 NPT 0.64 0.56 0.03

•C1CP52 F38 3/8 NPT 0.76 0.69 0.04

•C1CP54 F48 1/2 NPT 0.89 0.88 0.07

Model F



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Denso Petrolatum Tape

Description: Densyl Tape is composed of a non-woven synthetic fabric carrier, fully impregnated with a neutral compound based on saturated petrolatum and inert siliceous fillers.

Uses: Densyl Tapes are designed to withstand extreme temperature variations. The tapes provide long term corrosion protection to pipes, flanges, valves and related surfaces.

Features: Applied to marginally prepared surfaces • Conforms to irregular shapes and profiles • Can be applied to cold, wet surfaces • Not effected by water, acid, salts or soil organics • Encapsulation of lead paint • Contains no solvents • Meets AWWA C217 Standard • Can be applied above and below ground.

Properties: Thickness (ASTM D1000) 46 mils. Maximum Service Temperature 158°F.

Denso Petrolatum TapeCatalog Part No. Denso Model Description Wt.

Price Each

•C1GM81 DENSYL-TAPE-2IN Roll of All Purpose Petrolatum Tape, 2 inches wide x 33 feet long 2.01

Boeshield® T-9 Corrosion Shield & Waterproof Lubricant

Features: Penetrates deeply into fasteners and fixtures • Displaces moisture • Dries to a clean waxy film • Lubricates and protects all metals for months • Will not harm paints, plastics, rubber or vinyl • Attacks existing corrosion • T-9® will also loosen rusted parts • Contains No Fluorocarbons • Many Industrial and Household uses

Boeshield® T-9 Corrosion Shield & Waterproof LubricantCatalog Part No.

Boeshield Model Description Wt.

Price Each

•C1JD92 T9 Boeshield® T-9 Corrosion Shield, 12 oz Spray Can 1.00



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Anti-Seizing Products

Applications: Nuts, Bolts & Screws • Pipe Fittings • Boom Guides • Valve Assemblies • Pump Mountings • Chain Drives • Shafts • Gaskets • Press Fit Assemblies • Taps & Drills • Metal Fittings • Machinery

Anti-Seizing ProductsCatalog Part No. Mfg Model Description Wt.

Price Each

•C1FG17 NSBT-8 Bostik Never-Seez® Regular Grade Anti-Seize, 8 oz, Brush Top 0.64

SCRUBS in-a-Bucket® Hand Cleaner Towels

SCRUBS in-a-Bucket® are the pre-moistened, heavy duty hand cleaner towels that go where you go! SCRUBS in-a-Bucket® easily removes soil from your hands and leaves them clean and conditioned anywhere you are working. Powerful, yet safe, patented citrus-based formula works together with an absorbent, non-scratching abrasive hand cleaner towel for proven performance.

Benefits: Portable and convenient • One-step cleaning process • Conditions and softens hands • Will not transfer soils back onto hands • Works fast to loosen, dissolve and absorb dirt, grease and grime • Tough, durable bucket that is light and portable.

Quickly Removes: Adhesives • Caulk • Dirt • Epoxy • Grease • Ink & Dye • Lubricants • Oils • Paint • Sealant • Tar • Urethane • Wax • Asphalt • Polyurethane • Grime

SCRUBS in-a-Bucket® Hand Cleaner TowelsCatalog Part No.

ITW Dymon Model Description Wt.

Price Each

•C1EK16 422.30 Small Bucket of 30 Hand Towels 1.19

•C1EV89 422.72 Large Bucket of 72 Hand Towels 2.65

•C1ZT17 MISC-422-WMN Bracket to Surface Mount a Bucket of Hand Towels 0.66



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Cast Bronze Y-Strainers

Conbraco’s 59 Series “Y” strainers are lightweight and compact. All sizes offer maximum protection against foreign particles in piping systems and process equipment. Cast bronze body and stainless steel screens are completely corrosion resistant. Self-aligning screen is easily accessed for cleaning or service. Operating pressures up to 400 psig make the 59 Series an excellent choice as a versatile, multipurpose strainer. Sizes 1/8" to 1/2" are perfect for OEM applications and are available as UL recognized components for use as a secondary strainer on oil burning equipment. Optional tapped caps are also available for convenient cleaning of the screen and are not plugged.

Working Pressure (Non-Shock): 300 psig @ 350°F Steam. 400 psig @ 150°F Water, Oil, Gas. Self-Aligning Screens: 304 SS (Standard) available in a large variety of meshes (thru 100).

Cast Bronze Y-StrainersCatalog Part No. Conbraco Model Size Description Wt.

Price Each

C1EN59 59-001-01 1/4 NPT Standard 304SS 50 mesh screen, 1.38 in² screen area 0.44



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Precision Splined Hubs

Features: Made from low alloy, high carbon steel. Close tolerance O.D. and I.D. concentricity permits accurate mounting of sheave or sprocket. Precision also permits accurate chucking for additional mounting.

Precision Splined HubsCatalog Part No. Hub City Model Type Spline Details

Spline O.D. (in) Coupling O.D. (in) Coupling Length (in) Wt.

Price Each

•C1EX23 03-32-00032 9 Tooth SAE A 16/32 DP 30° PA 0.625 1.251 / 1.250 1.250 0.34

•C1AD60 03-32-00033 13 Tooth SAE B 16/32 DP 30° PA 0.875 1.501 / 1.500 1.50 0.52

•C1AD61 03-32-00034 14 Tooth SAE C 12/24 DP 30° PA 1.250 2.251 / 2.250 2.00 1.75

C1AD63 03-32-00074 13 Tooth SAE D 8/16 DP 30° PA 1.750 3.001 / 3.000 2.25 3.00

Tire Service Products

Tire Service ProductsCatalog Part No. Dill Model Description Wt.

Price Each

•C1EU50 D104 Tire Inflator Chuck. For direct connection to live air only. Features a built-in shutoff valve. Solid brass. 1/4 NPT female thread. 300 PSI maximum. 0.10

•C1DK87 SK-2043-C Gooseneck Style high pressure coupling with 70° angle. 5000 PSI working pressure. 10,000 PSI proof pressure. 1/8 NPT female thread. 0.14

•C1DK86 SK-20420 Tank Valve (Schraeder Valve) for charging pressure tanks or compressed air chambers. Complete with valve core and cap. 1/8 NPT male thread. 0.03

Service Station & Tank Truck Equipment

Service Station & Tank Truck EquipmentCatalog Part No. Dixon Model Description Wt.

Price Each

•C1GH70 900S34Utility Nozzle. 3/4" inlet, 3/4" spout size. 1 x 3/4 reducer bushing furnished. Die cast metal body. For use with 12 volt pumps and gravity flow. Applications include construction, farm and small utility tanks.

1.65

•C1GH71 900SK Seal Kit for Utility Nozzle. 0.08



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Hose Nozzles

Hose NozzlesCatalog Part No. Dixon Model Description Wt.

Price Each

•C1FC49 FNB75SThermoplastic Fog Nozzle with bumper. Red polycarbonate with brass stem. 3/4 NPS thread. For use with water only up to 100 PSI. Adjusts from straight stream to fog. 120° Spray, 30.9 GPM @ 100 PSI. Factory Mutual approved.

0.32

Textbooks

TextbooksCatalog Part No. Book Part No. Publisher Name of Textbook Description Wt.

Price Each

•C1JR30 TC-101-05-E Vickers Industrial Hydraulics Manual

Color-illustrated hardbound textbook covering a range of topics related to hydraulics and electrohydraulics, including basic hydraulics principles, electricity and electronics, amplifiers, cartridge valves and circuits.

3.14



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Gloves

GlovesCatalog Part No. Model Description Wt.

Price Each

•C1HL32 HSCGLV-LG Anti-vibration Gloves, Large. Heat resistant Amara synthetic leather with impact & vibration absorbing gel pads. 0.29

•C1HL33 HSCGLV-XL Anti-vibration Gloves, Extra Large. Heat resistant Amara synthetic leather with impact & vibration absorbing gel pads. 0.29

•C1HL31 HSCGLV-2X Anti-vibration Gloves, Double Extra Large. Heat resistant Amara synthetic leather with impact & vibration absorbing gel pads. 0.29

•C1JE44 4092 Select split leather palm, leather index finger, leather finger tips, leather thumb and knuckle strap. Wing thumb design with shirred elastic back and striped cotton back with safety cuff. 0.30

•C1JE96 8426 Cotton poly blend string knit, latex palm, knit wrist. 0.20

•C1JD52 1SR8427L Economy string knit with latex palm, knit wrist. 0.30

•C1JE97 85 10 pack of disposable latex gloves. Seamless and reversible with rolled cuff. 0.14

•C1JM35 4020 8 oz. 100% Cotton Jersey Gloves. Clute-cut design with knit wrist. 0.10

Hand Tools

Hand ToolsCatalog Part No. Model Description Wt.

Price Each

•C1KK63 61CB Channellock 6 in 1 Screwdriver. 0.50

•C1JF33 GS-3D Channellock Tongue & Groove Plier Set. 6-1/2", 9-1/2", 12" 2.00

•C1JF35 GS-6D Channellock Plier Set. 7" Cutting Plier, 7-1/2" Long Nose Plier, 10" Tongue & Groove Plier 2.19

•C1JM99 927-CHANNELLOCK

Channellock 8 inch Retaining Ring Plier. Capacity 1/4" to 2" External, 3/8" to 2" Internal. Includes 0.36 0.47 0.70 Straight Tips, 0.36 0.47 90° Tips. Easy Switch from External to Internal.

0.60



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Pneumatic Piston Vibrators Houston Vibrator BV Series

Features: BV Series Pneumatic Piston Vibrators will dislodge problem materials in bins, hoppers, chutes, pipes, railcars, and trucks. All models are available in Impacting or Air Cushioned (silent) configurations. • Low initial cost • Precision CNC machined bodies and pistons • Complete control over force, frequency, and amplitude by regulation of supply air pressure • Virtually maintenance free when installed with an HVI Air Preparation Unit. Available Options: Internal Tefkote® for lubrication-free operation and high

temperature environments • External coatings for corrosive or food-grade areas • Internal start springs for horizontal mounting • Tapped exhaust for routing exhaust air away from vibrator.

Pneumatic Piston Vibrators • Houston Vibrator BV SeriesCatalog Part

No. Houston Vibrator Model Description Wt. Price Each

C1JF16 BV225IMPTESSPneumatic Piston Vibrator, impacting style, with Tapped Exhaust (TE), Spring Start (SS), capacity 60 cubic foot hopper with 3/16 to 1/4 inch wall

17.44

Cable (Wire) Ties

Cable (Wire) TiesCatalog Part No. Model Description Wt. (pkg)

Price (per pkg)

•C1KH66 WT-4A 3.8 in long, 10 Assorted Colors, 18 lb Tensile Strength, UV Rated, 100 per package 0.05

•C1KH67 WT-7B 7.5 in long, Black, 50 lb Tensile Strength, UV Rated, Mil STD 3367-1, 100 per package 0.25




•C1KH63 WT-21B 21.75 in long, Black, 120 lb Tensile Strength, UV Rated, 100 per package 2.00


•C1KH65 WT-36B 36.5 in long, Black, 120 lb Tensile Strength, UV Rated, 100 per package 3.84



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Hannay Spring Rewind Hose Reels

Hannay Spring Rewind Hose Reels are typically used for lubrication, air, water, air tools, washdown and other general industrial applications. Models with 10,000 psi capability can be used in chassis grease applications. Rewind: A heavy-duty spring motor provides self-contained rewind power. A non-sparking ratchet assembly locks the reel when the desired length of hose has been payed out. A pull on the hose unlocks the reel and the spring motor retracts the hose. A declutching arbor is provided to prevent damage from reverse winding. Inlet: N500 Series: 90° swivel joint with 1/4 Inch Female Pipe. N700 Series: 90° swivel joint with 1/2 Inch Female Pipe. Outlet: N500 Series: 1/4 Inch Female Pipe. N700 Series: 1/2 Inch Female Pipe. Rollers: All models are supplied with a 4-way roller assembly.

Hose Stop: A hose stop should be used to prevent damage to rollers and nozzles and to permit adjustment of free hose length.

Product Temperature Range: -20°F to 225°F.

Hannay Spring Rewind Hose Reels

Catalog Part No.

Hannay Model

Pressure Rating (psi)

Hose Capacity 1/4 ID (ft)

Hose Capacity 3/8 ID (ft)

Hose Capacity 1/2 ID (ft) Dimensions (in) Wt.

Price Each

•C1DF67 N716-19-20J 3,000 -- 50 50 A = 10.5 B = 3 C = 8 D = 10 E = 11.25 F = 20.75 G = 20 H = 10.38 J = 10 K = 12 80.00

Parts & Accessories For Hannay Spring Rewind Hose ReelsCatalog Part No. Part Number Description Wt.

Price Each

•C1CY66 HS-3 Hose Stop, plastic, 3 inch OD, ID not drilled (Maximum hole size 1-7/8 in) 0.54

Hose Reels



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



High Pressure Hose Assemblies

High Pressure Hose Assemblies

Catalog Part No.

Pressure Pro Model

Hose I.D. (in)

Assembly Length (ft)

Pressure Rating (psi) Description Wt.

Price Each

•C1MK30 989400019 0.38 100 4000Black Hose, with Male x Female QD's, with

Bend Restrictor23.00

•C1MK31 989400075 0.38 50 4000Black Hose, with Male x Female QD's, with


•C1MK32 989400150 0.38 50 4000Grey Hose, with Male x Female QD's, with


Quick Couplers

Pressure Pro high flow couplers are non-valved for applications where maximum flow is required. Their smooth, open bore offers low pressure drops and is ideal for applications such as high pressure water and steam washers and carpet cleaners.

Quick Couplers

Catalog Part No.

Pressure Pro Model

Coupling Size Thread Size

Body Material

Pressure Rating (psi)

A (in)

C (in) Wt.

Price Each

•C1BK22 2STF2-B 1/4 1/4-18 4000 Brass 0.17

•C1BN23 3STF3-B 3/8 3/8-18 4000 Brass 0.26

•C1BR48 4STF4-B 1/2 1/2-14 4000 Brass 0.32

•C1EZ78 STFC6 3/4 3/4-14 2000 Brass 1.50

Quick CouplersCatalog Part No.

Pressure Pro Model

Coupling Size

Thread Size

Pressure Rating (psi) Body Material Wt.

Price Each

•C1JR69 3STM3-B 3/8 3/8-18 4000 Brass 0.24


Pressure Pro Model

Coupling Size

Thread Size


Price Each

•C1DL57 ST2F2-S 1/4 1/4-18 4000 Plated Steel 0.25



Socket Half - Female Pipe

Socket Half - Male Pipe

Plug Half - Female Pipe

Pressure Washer Products



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion



Pressure Pro Model

Coupling Size

Thread Size


Price Each

•C1ER45 ST3M3-S 3/8 3/8-18 4000 Plated Steel 0.08

CAUTION: Brass models wear out sooner than steel models in high pressure applications.


Pressure Pro Model

Coupling Size Color

Nozzle Type

Fan Angle Nozzle Size Wt.

Price Each

•C1JA39 925035Q 1/4 Green Flushing 25° 3.5 0.05

•C1JA41 940035Q 1/4 White Wash 40° 3.5 0.04

•C1JA38 915035Q 1/4 Yellow Chiseling 15° 3.5 0.04

•C1JC99 MSP4PAK 1/4 See Note 0.17

Red Cutting Nozzles: Concentrated stream that can gouge or cut, can cut stubborn stains from concrete surfaces.

Yellow Chiseling Nozzles: Works like a scraper, stripping paint, grease and grime from hard surfaces.

Green Flushing Nozzles: Most commonly used nozzle for cleaning dirt from sizing, sidewalks and metal furniture.

White Wash Nozzles: Wide spray for washing a large area, usually safe with most surfaces. MSP4PAK: Dixon model. Pack of 4 nozzles. 65° Soap, 15° Yellow, 25° Green, 40° White.

Adapters

AdaptersCatalog Part No. Pressure Pro Model Description Wt.

Price Each

•C1EP43 AL456 22MM Male x 3/8-18 Female Pipe 0.12

•C1EP44 AL457 22MM Male x 3/8-18 Male Pipe 0.14

Guns, Wands & Nozzles

Guns, Wands & NozzlesCatalog Part No.

Pressure Pro Model Description Wt.

Price Each

•C1KE30 21290C Gun. 5000 PSI / 10 GPM / 300°F maximum. 3/8 Female NPT inlet. 1/4 Female NPT outlet. 1.60

•C1KG88 DL36ICS Wand. 4060 PSI / 10.5 GPM / 302°F maximum. 36 inches long with straight end. 1/4 Male NPT both ends. 1.19

•C1BM19 3324-1001.4 (Hypro model)

Variable Fan Nozzle. 3000 PSI / 4.49 GPM / 300°F maximum. 0.055 inch orifice diameter. 0° to 80°

adjustable fan pattern (twist to adjust). Push-Pull for pressure adjustment. 1/4 Female NPT inlet.

0.28

Plug Half - Male Pipe

Plug Half - Spray Tips

Pressure Washer Products



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



RKI (Rawson Koenig) Hydraulic Worm Gear Winches

Maximum Line Pull: The maximum line pull of a winch depends upon which cable layer is being used, as shown in the chart, and must not be exceeded. Worm Brake: Applications that involve holding a suspended load should have a worm brake. Winches with brakes must have the cable wound according to the brake setting. Winches with brakes can be ordered either “overwind” cable spooled over the drum in the direction of the brake housing or “underwind” cable spooled under the drum in the direction of the brake housing. Drum Clutch: If you wish to pull rope off the drum by hand, a drum clutch is needed. If such freespooling is not needed, a keyed drum will be more reliable. Duty Cycle: Winches are rated for intermittent duty only. Excessive use will cause high

oil temperature resulting in rapid oil deterioration, lower efficiency and increased wear. Mounting: Winches should be mounted with the worm shaft horizontal and below the drum. Other arrangements

may not provide adequate lubrication. Worm brakes must be mounted below the oil level or they will fail. Available Options: Extra cable capacity, higher line speed, grooved drum barrel, divided drum, galvanizing and

stainless steel shafts for improved corrosion resistance, custom mounting, special shafts and power sources are some of the available options.

RKI (Rawson Koenig) Hydraulic Worm Gear Winches

Catalog Part No. Koenig Model

Winch Series Mounting

Worm Brake

Rotation

Worm Gear Ratio

Worm Gear Hand Drum Shaft Assy

Other Features Wt.

Price Each

C1JD33 08HUU-4LASL 08H Upright Under Wind 9:1 Left

Hand

With Drum Clutch, 3.50 Barrel Dia,

8.25 Flange Dia, 7.87

Barrel Length

Std Left Hand 35.00

Winches



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Kawasaki / Lantec Peel Press Drive

Package Features: 25+ years gear and bearing life expectancy. Extended warranty offered. Supported by factory authorized distributor, Kawasaki authorized QA Center. Double torque arm included. Gearbox: The Lantec HB341 7.58:1 planetary gearbox design incorporates a floating internal ring gear, which ensures an even distribution of load through the planet gears into the ring gear. A "clash of manufacturing tolerances" is prevented with this floating design. Since the load is evenly distributed, the gears experience even wear, prolonging life. All steel construction. Floating ring gear is heat treated, forged alloy steel. Planet & sun gears are carburized and heat treated steel. All gearing in accordance with A.G.M.A. guidelines. Tapered Timken roller bearings are used in this design. This type of bearing is stronger than "skinny" needle bearings, which are found in competing gearboxes. (Needle bearings are more prone to breakage if mis-aligned). Input shaft and mount will directly accept the Staffa motor. Output shaft is flanged and is ready to bolt down to peel press. Convenient gear lube level indication and fill. Motor: The Kawasaki HMB-150-S Staffa hydraulic motor features hydrostatically balanced con rods for high starting and running torques, and low wear. The motor is

simply constructed and is rated at 3600 PSI continuous, 4250 PSI intermittent. A double-lip, double spring shaft seal is in place for efficient low speed sealing. A motor case flushing & cooling circuit is included. Motor is manufactured in an ISO 9002 Certified facility.

Life Expectancy Operating Conditions: 28,476 foot pounds torque, 5 RPM, and continuous duty cycle. Gearbox Life Expectancy: Durability (gear pitting life) is calculated at 213,000 operating hours at full load and

speed. 213,000 hours divided by 3,500 hours per season = 60+ years gearbox life. Motor Life Expectancy: L10 Bearing Life is calculated at 17,750 hours (front bearing) and 17,580 hours (rear

bearing). 17,580 divided by 3,500 hours per season = 5 years motor L10 life. Extended Warranty: We have so much confidence in this package that we offer an extended 3-year warranty

from the date of installation. This extended warranty requires a pre-installation inspection of the hydraulic system and system upgrade if required. Please contact us for details on this extended warranty.

Kawasaki / Lantec Peel Press DriveCatalog Part No. HSC Model Description Wt. Price Each

C1DG93 PEEL-PRESS-UNIT Peel Press Drive, complete, including gearbox, motor, motor flange kit and adapters, motor case drain standpipe, motor case flushing & cooling circuit 2600.00

Note: This peel press assembly is NOT kept in stock.

Peel Press Drive



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Hydraulic Fluid (Anti-Wear, Wide Temperature Range) Mobil D.T.E.® 10M Series

Description: These antiwear oils meet the demanding requirements of hydraulic systems which operate over a wide temperature range. The highly refined base oils used were selected for optimum flow characteristics at subzero temperatures as well as long term stability in demanding systems. A Viscosity Index (VI) improver system with maximum resistance to shearing and viscosity loss maintains system efficiency and minimizes internal pump leakage losses at high operating temperatures. These oils are approved in the Denison HF-O, Vickers V 104C, Vickers 35VQ25, Sunstrand pumps and Rexroth axial piston pumps Application: Primarily recommended for hydraulic applications where low ambient temperatures or rapid changes from low to high temperatures are encountered. Advantages: Suitable for wide temperature range conditions • Superior low-temperature flow properties • Outstanding keep-clean performance • Stay-In-Grade viscosity under high shear

conditions • Super stabilized antiwear and water tolerance • Good demulsibility, filterability and foam resistance • Excellent multimetal compatibility and corrosion resistance.

Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Material Safety Data Sheets (MSDS) are available upon request. page 1487

Viscosity - Temperature Charts: page 1487

Hydraulic Fluid (Anti-Wear, Wide Temperature Range) • Mobil D.T.E.® 10M Series

Catalog Part No. Mobil Model

Container Size

ISO Viscosity

Grade ViscosityViscosity

IndexPour Point

Flash Point

Gravity, API

Specific Gravity

Wt. (lb)

Price Each

•C1CN74 DTE-10-EXCEL-32 5 gal 32 32.7cSt@104°F 6.63 cSt@212°F 164 -65.2°F 482°F -- 0.8468 35.27

NOTE: Lubricating Oil products are NOT stocked at our Distribution Center, and are only available for local pickup at our branch locations. For these products, a BOLD Catalog Part No. means EVERY branch location stocks it, and a Bulleted • Catalog Part No. means CERTAIN branch locations stock it.

Hydraulic Fluid, Tractor Transmission/Hydraulic FluidAutomatic Transmission Fluid, Gear Lube, Motor Oil



Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Hydraulic Fluid (Anti-Wear, Super-Stabilized) Mobil D.T.E.® 20 Series

Description: These oils provide superior antiwear and film strength characteristics for use in severe duty hydraulic systems, and are formulated from stable, high quality, high VI base stocks. The super-stabilized additive system was selected to neutralize the formation of corrosive materials, provide excellent antiwear properties, and multimetal compatibility. This additive system also provides better thin oil film protection against rusting, retention of superior oil cleanliness and improved compatibility with water. These oils are approved in the Denison HFO, Vickers V-104C and 35VQ25, and Sunstrand pump tests. DTE 24, 25 and 26 are qualified against Cincinnati Milicron specifications P-68, P-70 and P-69, respectively. Application: Primarily recommended for most hydraulic applications in industrial, marine and mobile service, including high-pressure systems, systems with servo valves and all robotics. Advantages: Excellent keep-clean performance for systems critical to deposit buildup, such

as sophisticated NC control mechanisms • Controlled demulsibility allows the oils to work well when contaminated with small amounts of water, and to separate large amounts of water readily • Multimetal compatibility under both wet and dry conditions protects pumps using steel and copper alloys • Excellent protection against rust • Good thin oil film protection for surfaces intermittently wetted by oil • Outstanding load-carrying and antiwear properties.

Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. No special precautions are suggested beyond attention to good personal hygiene including laundering oil-soaked clothing and washing skin-contact areas with soap and water. Material Safety Data Sheets (MSDS) are available upon request.


Hydraulic Fluid (Anti-Wear, Super-Stabilized) • Mobil D.T.E.® 20 Series


Container Size

ISO Viscosity


IndexPour Point

Flash Point

Gravity, API

Specific Gravity Wt.

Price Each

•C1JB78 DTE-24 5 gal 32 165SSU@100°F 44SSU@210°F 95 -10°F 395°F 32 0.867

•C1CN75 DTE-25 5 gal 46 238SSU@100°F 49SSU@210°F 95 -10°F 395°F 31.5 0.873





Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Hydraulic Fluid (Anti-Wear, Biodegradable) Mobil EAL® 224H

Description: Developed to meet stringent performance requirements, as well as to satisfy needs for a hydraulic oil which is readily biodegradable and virtually nontoxic. Formulated from select, high quality, high VI vegetable oils and additives. Approved in Vickers V-104C and 35VQ25, and various pump tests, and meets the requirements of Denison HF-O and the TP30283A vane pump tests. Application: Primarily recommended for most hydraulic systems operating with oil temperatures in the range of 0°F to 180°F where readily biodegradable and virtually nontoxic fluids are required. It can be used in industrial, marine and mobile service, including high pressure systems, systems with servo valves and all robotics. It may be used in gear applications requiring either an ISO VG 32 or 46 oil with mild extreme-pressure characteristics. Its high viscosity index satisfies other applications requiring an ISO VG 32 or

46 oil. Advantages: A high-performance, readily biodegradable, virtually nontoxic antiwear hydraulic oil • Multimetal

compatibility protects pumps made of steel and copper alloys • Excellent protection against rust • Good thin oil film protection of surfaces intermittently wetted by oil • Outstanding load-carrying and antiwear properties.

Spillage & Disposal: Depending on contamination and/or degradation levels, small amounts of spilled or leaked Mobil EAL 224H will not adversely affect ground water or the environment. For small spills on the ground, the uncontaminated product will readily biodegrade by naturally occurring soil organisms when exposed to air. Nonetheless, spillage of Mobil EAL 224H should be handled similarly to currently accepted methods for conventional mineral oil spills. Mobil EAL 224H does not contain hazardous substances reportable under CERCLA. Since ALL oil spills are reportable, even a spill of the vegetable-based product must be reported to the National Response Center (the U.S. Coast Guard). Local environmental agencies should also be consulted to clarify local requirements.

Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. Material Safety Data Sheets (MSDS) are available upon request.


Hydraulic Fluid (Anti-Wear, Biodegradable) • Mobil EAL® 224H


Container Size

ISO Viscosity


IndexPour Point

Flash Point

Gravity, API


Price Each

•C1CN87 EAL224H 5 gal 34/46 187SSU@100°F 54SSU@210°F 213 -18°F 428°F 22.1 0.922 30.00





Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Tractor Transmission/Hydraulic Fluid Mobil Mobilfluid® 424

Description: A multipurpose, extreme-pressure, tractor transmission/hydraulic fluid. APPROVED against following specifications: John Deere Quatrol®, J20A, J20C. Ford New Holland M2C134D. Massey Ferguson M1135, M1141. White New Idea Q-1802, Q-1826. Allison C-4 and Volvo BM. Denison HF-O, HF-1, HF-2. Sauer Sunstrand. EXCEEDS performance requirements of: Case International J/C 145/MS 1210, J/C 185/MS 1204, MS 1205, MS 1206, MS 1207, B6. Deutz-Allis 821XL. Komatsu Dresser B-06-0001, B-06-0002. Caterpillar TO-2 Powershift. L-20. Ford Type F (Tractor). Dexron® and Type A, Suffix A (Tractor). Sunstrand Hydrostatic. Vickers 35VQ25A Pump. Sunstrand 22 Axial Piston Pump. Plessey-Sunstrand Gear Pump. Cincinnati Milacron P-68, P-69, P-70. Copper corrosion (ASTM D 130), 1A Rating. EXCEEDS performance recommendations of: Clark, KH Deutz, Ebru, Fendt, Fiat-Hesston, Hurlimann, International Hough, IMT, Lamborghini, Link Belt,

Renk, Schluter, Steyr Daimler Puch, Steiger, Universal, Ursus, Valmet, Zetor. Application: Recommended for top-up and refill of transmissions, differentials, final drives, hydraulics, and power

steering systems, as well as wet brakes, PTOs, and hydrostatic drives in farm, contractor, and industrial tractors recommending the above specifications. NOT for use in engine crankcase. NOT for use in passenger car automatic transmissions.

Advantages: Considerable improvement in wet brake and PTO chatter control • Enhanced shear stability in field service • Outstanding low temperature performance • Optimized wear protection of gears, pumps and hydraulic valves • Improved thermal stability for long service life in severe applications • Balanced friction for extended clutch life • Good water tolerance and protection from rust and corrosion • Freedom from sludge and deposits • Good filterability for optimum hydraulic operation.


Tractor Transmission/Hydraulic Fluid • Mobil Mobilfluid® 424Catalog Part No. Mobil Model

Container Size

SAE Grade Viscosity

Viscosity Index

Pour Point

Flash Point

Gravity, API


Price Each

•C1BP90 424 5 gal 10W-30 254SSU@104°F 43SSU@212°F 152 -46°F 442°F 29 --





Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Automatic Transmission Fluid Mobil Multi-Purpose ATF

Description: A new generation, premium automatic transmission fluid meeting major U.S. and import car manufacturers' performance requirements. Formulated from special, high quality base oils combined with viscosity index (VI) improvers, antioxidants, antiwear agents, detergents, and defoamants. Contains special friction modifiers or lubricity agents to control the transition from full film to thin film lubrication as a vehicle's band and clutches are activated during shifting. Application: Recommended for make-up and refill in 1974 and later General Motors cars and light trucks, and for make-up and refill in 1988 and later Ford and other vehicles requiring Mercon®, as well as 1981 and later Fords requiring an M2C138CJ or M2C166H fluid. May be used in other domestic and imported cars that require a Dexron III, Mercon® or Ford Type H fluid. Can be used in off-highway transmission, power steering, and other hydraulic systems

requiring a Dexron III or Alison C-4 fluid. Meets industrial hydraulic oil demands of Denison HFO, Vickers vane, and Sunstrand piston pumps.

Advantages: Satisfies new car warranty requirements • Excellent low-temperature requirements, Smooth, positive shift characteristics under both normal and severe operating conditions • Protection against high-temperature deposits during severe service • Minimal wear of transmission components • Reduced foaming and fluid loss in severe service.


Automatic Transmission Fluid • Mobil Multi-Purpose ATFCatalog Part No.

Mobil Model

Container Size Color Viscosity

Viscosity Index

Pour Point

Flash Point

Gravity, API


Price Each

•C1CK84 ATF 5 gal Red 166SSU@104°F 35SSU@212°F 184 -45°F 370°F 31.3 0.869





Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Gear Lubricants Mobil Mobilube® HD

Description: Multipurpose, heavy-duty, extreme pressure gear lubricants. Made with select, specially processed base oils that provide good stability at high temperatures and good performance at low temperatures. The naturally high viscosity index of the base oil, in combination with the sulphur phosphorous additives, results in exceptional chemical and thermal stability. Antiwear and antifriction additives control wear, scoring, and frictional power losses. These lubricants resist foaming, are compatible with normally used seal and gasket materials, and provide good protection against copper corrosion. They have demonstrated protection against rust resulting from water contamination and storage in a humid atmosphere by passing the L-33 rust test of MIL-PRF-2105E. Application: Intended for initial fill, topping-off and refill of enclosed automotive gear cases of manual or semiautomatic transmissions where gear lubricants are recommended, drive axles,

and final drives of passenger cars, trucks, taxicabs, and contractor and farm equipment. These products meet U.S. Military Specification MIL-PRF-2105E, and the requirements of the L-37 and L-42 full-scale axle tests, and are fully approved against Mack Truck specifications GO-H and GO-J. Recommended for API GL-5 Service, covering hypoid and other gears in passenger cars and other automotive equipment operated under high-speed shock load, high-speed low torque, and low-speed high torque conditions. Satisfactory for either topping-off or entirely refilling most differentials, except limited-slip types (severity level of limited-slip types may require factory-provided lubricant). Use at bulk oil temperatures up to 300°F is permitted with realistic drain and refill schedules. Steady operation at temperatures above 260°F is NOT recommended. These products should NOT be used in transmissions for which engine oil or automatic transmission fluid is recommended, and should NOT be used when an API GL-4 gear oil is recommended.

Mobilube® HD 80W-90: Meets the viscosity requirements of SAE 80W, 85W, and 90 grade products, and can be used for temperatures down to -15°F.

Mobilube® HD 85W-140: Meets the viscosity requirements of SAE 85W, 90W, and 140 grade products, and can be used for temperatures down to 10°F.

Advantages: Uninterrupted performance under broad temperature variations • Excellent protection against wearing and scoring by high-speed and heavy gear loads • Moderate performance in limited slip differentials • Superior protection against rusting, staining, corrosion • Good thermal stability and foaming resistance • Compatible with seals and gaskets.

Health & Safety: Based on available toxicological information, these products produce no adverse effects on health when properly handled and used. Material Safety Data Sheets (MSDS) are available upon request.

Gear Lubricants • Mobil Mobilube® HDCatalog Part No. Mobil Model

Container Size

SAE Grade Viscosity

Viscosity Index

Pour Point

Flash Point

Gravity, API Wt.

Price Each

C1ER42 SAE85W-140 5 gal 85W-140 1530SSU@100°F 125SSU@210°F 103 -18°F 356°F 24.8





Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Commercial Automotive Engine Oil Exxon XD-3™ Extra 15W-40

Exxon XD-3 EXTRA 15W-40 is a super premium quality heavy-duty engine oil that provides outstanding performance in the most severe diesel and gasoline engine applications. Available in an SAE 15W-40 multi-grade, XD-3 EXTRA provides the reliable flow properties of a 15W-40 grade in a cold engine at start-up and the higher-temperature properties of the SAE 40 grade after the engine warms up to operating temperature. Versatile Performance: Exxon XD-3 EXTRA 15W-40 meets API Service Categories CI-4, CH-4, CG-4, CF-4 and CF to provide reliable performance in the latest emission designs, including those with EGR systems, as well as satisfying the needs of older engines. In addition, it meets API SL and SJ requirements for four-stroke gasoline engines. Outstanding Service in Diesel-Powered Equipment: Exxon XD-3 EXTRA 15W-40 can be

used where API CI-4, CH-4, CG-4, CF-4, and CF oils are recommended. Additionally, XD-3 EXTRA is approved against Cummins CES 20078, Cummins CES 20076, Cummins 20071, Mack EO-N Premium Plus, Mack EO-N, Mack EO-M Plus, Mack EO-M and Volvo VDS-2 specifications. XD-3 EXTRA has demonstrated excellent performance in the key tests required for the API CI-4 specifications, as well as tests required for OEM specifications. In addition to laboratory engine tests, XD-3 EXTRA additive technology has demonstrated outstanding diesel engine field performance in tests of varying severity. Exxon XD-3 EXTRA is specially formulated to provide excellent performance in all recommended applications. It is extremely resistant to the formation of high-temperature deposits and retains its alkalinity (TBN) over many miles of service. As a result, engines operated with XD-3 EXTRA generally have very low ring-belt deposit levels, and the corrosive wear caused by organic acids is minimized because of the ongoing ability of the oil to neutralize the acids. The excellent dispersancy of XD-3 EXTRA works to keep the cooler areas of the engine virtually free from sludge that can plug oil passages and oil filters and reduce effective lubrication.

Formulated for the Severe Demands of Newer Engines: Diesel engines manufactured after October 2002 will be designed to meet very stringent emission requirements. These new engines place more severe demands on a lubricant's oxidation resistance, TBN retention and soot dispersing capabilities. XD-3 EXTRA 15W-40 engine oil is specially formulated for these newer engines and will provide reliable protection against increased heat, acids and soot. Exxon XD-3 EXTRA was specifically formulated to reduce oil make-up requirements. This effect comes for the high-quality base stocks which exhibit lower volatile loss at high temperatures. In addition, XD-3 EXTRA has demonstrated outstanding piston deposit protection. Exxon XD-3 EXTRA 15W-40 can also be used in gasoline engines where API SL or SJ quality oils are recommended.

Health & Safety: XD-3 EXTRA should be promptly removed from the skin. Soiled clothing should not remain in contact with the skin. Oils and greases are readily removed from the skin by waterless hand cleaners, followed by washing with soap, water, and a soft skin brush. If petroleum products contact the eyes, flush the eyes with fresh water until the irritation subsides. WARNING: "Empty" containers retain residue (liquid and/or vapor) and can be dangerous. Do not pressurize, cut, weld, braze, solder, drill, grind, or expose such containers to heat, flame, sparks or other sources of ignition; they may explode and cause injury or death. "Empty" drums should be completely drained, properly bunged, and promptly returned to a drum reconditioner. All other containers should be disposed of in an environmentally safe manner and in accordance with governmental regulations. Additional important health and safety information on this product can be found in the Material Safety Data Sheet, available on request.

Commercial Automotive Engine Oil • Exxon XD-3™ Extra 15W-40Catalog Part No. Exxon Model

Container Size

SAE Grade Viscosity

Viscosity Index

Pour Point

Flash Point

Gravity, API Wt.

Price Each

C1FW33 XD-3 5 gal. 15W-40 540SSU@104°F 72SSU@212°F 138 -27°F

Note: Lubricating Oil products are NOT stocked at our Distribution Center, and are only available for local pickup at our branch locations. For these products, a BOLD Catalog Part No. means EVERY branch location stocks it, and a Bulleted • Catalog Part No. means CERTAIN branch locations stock it.




Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


CRC Chemical Maintenance Products

Industrial Cleaning

Industrial CleaningCatalog Part No.

CRC Part No. Product

Container Size Description Wt.

Price Each

•C1MH37 MK2832 Spray Away® All Purpose Cleaner

32 fl oz bottle

Cleans grease, grime, oil, rain stains, fish blood and more. Great on virtually any surface. Heavy duty formula is four times stronger

than most spray cleaning products. Non-flammable.2.00

•C1FR61 14408 All Purpose Cleaner/Degreaser

1 gallon bottle

Biodegradable and concentrated. Non-corrosive, non-abrasive. Non-flammable. Safe on most plastics. Low foaming. 9.20

•C1FR60 14170 Citrus Cleaner/Degreaser

20 oz aerosol

Pleasant citrus scent. Leaves no residue. Fast evaporation. Biodegradable. Non-corrosive, non-abrasive, non-staining. 1.25

•C1FR62 14411 Glass Cleaner Professional Strength

30 oz trigger bottle

Professional strength streak-free glass cleaning. Biodegradable, ready to use. Non-abrasive foaming action. Non-flammable,

non-ozone depleting.2.05

•C1FR44 03176 Battery Cleaner 12 oz aerosol

Removes corrosion quickly while neutralizing acid spills. Assures maximum battery current flow. Promotes longer battery life. 0.92

•C1FR42 03130 QD™ Contact Cleaner 16 oz aerosol

Quick drying, leaves no residue, safe on all plastics. Effectively removes soil and other contaminants from electrical and

electronic components. Ideal for applications where lower flashpoint solvents can be used.

0.96

•C1MM69 MK2132 Cleaning Detail® Non-Skid Deck Cleaner

32 fl oz bottle

Cleans and brightens fiberglass, stainless steel, chrome, aluminum, and brass. Removes dirt, grease, grime and chalking.

Easy to use on most surfaces above the waterline. Great for non-skid decks, shower stalls & tubs.

2.50

•C1ML44 MK2032 On & Off Hull & Bottom Cleaner

32 fl oz bottle

Works instantly to remove the toughest waterline stains, algae stains, rust & gas exhaust stains. Use on fiberglass only. Will not

harm gel coat.3.70

•C1MC31 MK2232 Super Suds® Boat Soap 32 fl oz bottle

Highly concentrated synthetic detergent. Non-streaking. Leaves no residue. Cleans away dirt and grime, leaving surfaces

sparkling clean. Makes 64 buckets of wash. Will not remove wax.2.27

•C1KZ19 18420 Rust Remover 32 fl oz bottle

A safe, effective, fast acting formula. Removes rust, not metal. No sand blasting or heavy wire brushing required. Leaves metal

clean and ready to paint, plate or powder coat.0.50

•C1ML45 MK2332 Big Bully® Natural Orange Bilge Cleaner

32 fl oz bottle

Works instantly to emulsify oil, grease, & scum. Tough citrus cleaning power absorbs odors and leaves bilge areas clean and fresh. Self-cleaning formula is activated by the rolling action of

the boat.

2.00




Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Lubricants

LubricantsCatalog Part No.



Price Each

•C1FR38 030053-36® Multi-Purpose Lubricant & Corrosion

Inhibitor

16 oz aerosol

Cleans, lubricates, penetrates and loosens corrosion. Prevents corrosion by displacing moisture. Penetrates through corrosion

to loosen frozen parts. Lubricates without leaving a sticky residue. Cleans light soils and contaminants.

0.93

•C1FR39 03040 Food Grade Silicone 16 oz aerosol

Meets FDA CFR 21-178.3570 for incidental food contact. Forms a colorless, odorless, non-staining film. Harmless to most

rubbers & plastics. -40°F to 400°F. Excellent release agent and lubricant for all surfaces.

0.87

•C1FR40 03050 Chain & Wire Rope Lubricant

16 oz aerosol

Penetrates deep and leaves a tough film that lubricates & protects. Resists water wash-off and high temperature sling-off.

Absorbs pin/bushing shock and cushions rollers, pins and bushings. Can be applied with guards in place.

0.87

•C1HC80 06077 Marine Silicone Lubricant

12 oz aerosol

A multi-purpose silicone spray. Forms a colorless, odorless, non-staining film that lubricates & protects in most metal to

non-metal applications. Dry film eliminates binding & sticking while protecting most surfaces.

0.69

•C1FR41 03080 White Lithium Grease 16 oz aerosol

Excellent heat & water resistance. Rust & oxidation inhibitors for superior metal protection. Smooth, buttery consistency.

Produces a tough, high viscosity film. White color for easy visual inspection of film coverage.

0.90

•C1FS54 SL35901 Copper Anti-Seize 8 oz brush top bottle

Copper-based, safe for use on both ferrous and non-ferrous metals. Protects parts up to 1800°F. Electrically conductive. Will

not harden. Heat aging won't affect lubricity of product.0.60

•C1FR59 14095 Copper Anti-Seize 16 oz aerosol

Copper-based, safe for use on both ferrous and non-ferrous metals. Protects parts up to 1800°F. Electrically conductive. Will

not harden. Heat aging won't affect lubricity of product.1.09

•C1FS55 SL35911 Nickel Anti-Seize 8 oz brush top bottle

Copper-free formula for use where a clean, chemically inert & stable lubricant is required. Protects parts up to 2400°F.

Electrically conductive. Will not harden. Heat aging won't affect lubricity of product.

0.58

•C1JC26 03060 Screwloose® Super Penetrant

16 oz aerosol

A no-compromise penetrant that attacks corrosion to free corroded fasteners & mechanical components. A super-fast,

powerful, concentrated penetrating solvent that loosens & cleans. Instantly penetrates minute & tightly fitted crevices.

0.65

Vehicle Maintenance

Vehicle MaintenanceCatalog Part No.



Price Each

•C1LW49 05316 Motor Treatment 16 fl oz can

Cleans gum, varnish, and carbon from the fuel system, injectors, pistons, and combustion chamber. Removes moisture from fuel

and oil systems and lubricates engine components.1.00

•C1MH65 05212Diesel Fuel Therapy® Diesel Injector Cleaner

Plus

12 fl oz bottle

This emissions reducing formula is rated "SUPERIOR" in Cummins L-10 Test for injector cleanliness. Cleans injectors,

adds lubricity, increases power and MPG.0.83

•C1KT97 05412Diesel Fuel Therapy® Diesel Injector Cleaner

with Anti-Gel

12 fl oz bottle

This emissions reducing formula is rated "SUPERIOR" in Cummins L-10 Test for injector cleanliness. Lowers pour point & CFPP, reliquefies gelled fuel, adds lubricity, increases power and

MPG.

0.80

•C1GH16 05557Bio-Con™ Diesel Fuel

Sludge Sediment Remover

12 oz bottle

Improves storage stability of fuel. Prevents fuel filter plugging. Absorbs moisture. Keeps injectors clean. 0.83

•C1GH15 05089 Brakleen® Brake Parts Cleaner

20 oz aerosol

Quickly removes brake fluid, grease, oil and other contaminants from brake linings and pads. Cleans fast, dries fast, no residue.

Non-flammable. Works without disassembly.1.46




Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Electrical Maintenance

Electrical MaintenanceCatalog Part No.



Price Each

•C1FR17 02085 Di-Electric Grease6 oz

pressurized tube

Non-curing silicone compound used for electrical sealing, lubricating, protecting & insulating. Meets FDA CFR 21-175.300 (release agent) and CFR 21-178.3570 (lubricant, incidental food

contact). Excellent lubricant for rubber & plastic parts.

0.37

•C1MG23 06106 Marine Premium Electronics Grease

6 oz pressurized

tube

Seals, protects & insulates electrical contacts from moisture. Lubricates & seals rubber & plastic parts. Waterproofs

components & contacts to protect against arcing. Improves electrical performance during adverse conditions such as rain &

fog.

0.50

Corrosion Inhibitors

Corrosion InhibitorsCatalog Part No.



Price Each

•C1JE82 03282 SP-400™ Corrosion Inhibitor

16 oz aerosol

Long-term indoor/outdoor corrosion inhibitor that provides protection of all equipment subject to heat, humidity, chemicals or

severely corrosive atmospheres. Use on machined surfaces & assemblies subjected to long periods of storage.

0.87

•C1MH68 06068 Engine Stor® Fogging Oil

16 oz aerosol

As fogging fluid, it protects outboard motors, marine engines & internal combustion engines, insures longer life. As long term

metal protectant, it keeps pistons, rings & cylinder walls corrosion free. Also protects electrical connections in use/storage.

1.08

•C1MH41 SX32MSalt Terminator® Engine

Fluch, Cleanter & Corrosion Inhibitor

32 fl oz bottle

w/mixer

Cleans & protects anything exposed to salt (saltwater, salt air, road salt). Dissolves salt & leaves a protective coating to inhibit corrosion. Essential as a motor flush for marine engines in both

saltwater and freshwater environments.

0.41

•C1MM26 SX128Salt Terminator® Engine

Flush, Cleaner & Corrosion Inhibitor

1 gal bottle

Cleans & protects anything exposed to salt (saltwater, salt air, road salt). Dissolves salt & leaves a protective coating to inhibit corrosion. Essential as a motor flush for marine engines in both

saltwater and freshwater environments.

3.70

•C1FR43 03175 Battery Terminal Protector

12 oz aerosol

Soft, flexible film completely encapsulates exposed surfaces and will not become brittle, crack or peel. Dries quickly and protects

instantly. Red color for easy visual inspection.0.68

•C1FR63 18412 Zinc-It® Instant Cold Galvanize

16 oz aerosol

Actively fights rust & corrosion with a film of 95% pure zinc. Protects base metal even when scratched or abraded.

Fast-drying. Excellent weldability.1.10

Greases & Oils

Greases & OilsCatalog Part No.



Price Each

•C1FS53 SL3120 Marine Grease 14 oz cartridge

For boat trailer wheel bearings. Aluminum complex, NLGI #2 grease. Excellent water resistance. Superior rust and corrosion

protection. Typical drop point 470°F.0.98




Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Specialty Products

Specialty ProductsCatalog Part No.



Price Each

•C1FR57 14055 RTV Silicone Adhesive/Sealants

Clear 8 oz pressurize

d tube

Clear - Forms a barely visible water-tight seal. RTV (Room Temperature Vulcanizing) Adhesive/Sealants are designed for a

wide range of sealing, bonding, protecting and waterproofing applications.

0.68

•C1FR58 14056 RTV Silicone Adhesive/Sealants

White 8 oz pressurize

d tube

White - Designed for high moisture, indoor/outdoor applications. RTV (Room Temperature Vulcanizing) Adhesive/Sealants are designed for a wide range of sealing, bonding, protecting and

waterproofing applications.

0.68

•C1FS52 SL1712Mechanix Orange™ Citrus Lotion Hand

Cleaner with Pumice

16 fl oz bottle

Fresh citrus scent. Contains no harsh solvents. pH balanced. Conditions skin. Biodegradable. Fortified with pumice for

deep-cleaning power.1.19

•C1AK48 14010 Wasp & Hornet Killer PLUS™

20 oz aerosol

Fast acting, high strength insecticide. Ergonomic trigger that provides control, even with gloved hands, and is accurate up to 15' away Plastic safe - will not damage plastic connectors and

other insulating materials.

1.16




Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Heavy Duty Grease Guns

Features: Automatic variable stroke/pressure, air vent fitting, vinyl grip, deluxe pull handle, positive lever stop, heavy-duty one piece head, 3-way loading, loader fitting included.

Heavy Duty Grease Guns

Catalog Part No.

Alemite Model

Pressure Rating (psi) Strokes for 1 oz Other Features Wt.

Price Each

•C1KK43 555-GUN 7,500 30 Rigid extension 3.30

•C1BR62 500 10,000 21 Rigid extension 3.49

Heavy Duty Deluxe Pistol Grease Gun with 18" Flex Hose

Comes with 18" Flex Hose extension for Hard-to-reach Fittings • Convenience of One-hand operation for easy Greasing • Heavy-duty, LuCast TM, Cast-Alloy Head with Heavier and Reinforced Wall Thickness for Extra Strength • Develops up to 7,000 PSI • WARNING : Do not hold Whip Hose while pumping the Grease Gun. Replace damaged Whip Hose with 4500 PSI Rated Hose only • Handy 3-way loading - fill with Standard Cartridge, Suction or Bulk Fill • Air Bleeder Valve to release Trapped Air • Filler Nipple with Ball Check for use with Grease Filler Pump • Chrome Plated finish Handle for Maximum Protection against Corrosion • Deluxe, Oil-resistant, Contoured Grip for Comfort and Firm Grip • Heavy Gauge Steel Barrel (18 Ga) • Wide Band, Non-slip Knurling for Sure-grip Handling • Tough Follower offers Superior Seal and eliminates Grease Bypass • Heavy-duty Follower Spring for Consistent Priming • Posi-lock Follower Rod with Ergonomically designed T-handle provides Sure-handed Grip and easy filling at any position • Outputs 4 oz. of Grease per 100 Strokes • Complete with 4" Extension Pipe, Four Hardened Jaws Hydraulic Coupler with Ball Check and Non-drip Cap.

Heavy Duty Deluxe Pistol Grease Gun with 18" Flex HoseCatalog Part No. Lumax Model Description Wt.

Price Each

•C1JP24 LX-1152 Pistol Grease Gun with 18 inch Flex Hose 3.02

Lubrication Equipment & Accessories



Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Grease Fitting / Joint Fitting Cleaner

For use on stubborn or clogged grease fittings and joints • Cleans and replenishes old and dry grease fittings • Saves the time and expense of replacing a clogged fitting.

How It Works: Pour fluid into cylinder. Lightly tap the head of the plunger after coupler is attached to the fitting. Fluid is dispensed into the fitting.

Grease Fitting / Joint Fitting CleanerCatalog Part No. Alemite Model Description Wt.

Price Each

•C1GL24 339841 Grease Fitting/Joint Cleaner 1.48

Mobilgrease® HP Multipurpose Automotive Grease

Mobilgrease® HP is an NLGI No. 2 unleaded, lithium complex soap grease. It has a smooth structure and is extremely adhesive in service. Mobilgrease® HP contains extreme pressure additives and oxidation inhibitors. Base oil viscosity is an ISO Grade 220, dropping point is 500 deg. F, or greater.

Application: Mobilgrease® HP meets the requirements for extended lubrication intervals of automotive chassis lubrication points and disc brake wheel bearings, particularly in passenger cars, light trucks, taxi fleets and farm equipment. It is also recommended for small marine craft. Mobilgrease® HP resists water washout and sprayoff. It provides excellent rust protection as well as protection against wear, making it an excellent choice for on- and off-highway heavy duty equipment (fifth wheels, kingpins, u-joints, bucket pins, etc). Note: When wheel bearings are packed for the first time with Mobilgrease® HP, remove the old grease completely, wash the bearings with a suitable safety solvent, and dry them thoroughly before repacking.


Mobilgrease® HP Multipurpose Automotive GreaseCatalog Part No.

Model Number Description Wt.

Price Each

C1CX88 GREASE 14 oz. tube. Blue color. 0.97




Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Grease Gun Extension Hoses

Economical, durable thermoplastic or rubber/wire braided hoses. 12,000 PSI Burst Pressure. Male 1/8 NPT ends. WARNING: The pressure rating on these hose assemblies apply when used with hand-operated grease pumping

equipment ONLY, such as grease guns or bucket pumps. DO NOT use with power operated equipment.

Grease Gun Extension Hoses

Catalog Part No. Model Mfg. Name

Length (in)

Working Pressure (psi) Hose Type Wt.

Price Each

•C1ZU96 B337595-A1 Alemite 12 6,000 Thermoplastic 0.18

•C1JP25 LX-1203 Lumax 18 4,500 Thermoplastic 0.17

Couplers

Provides quick, positive, leakproof connection with grease fittings. Grease pressure forces 3 hardened steel jaws against grease fitting. Standard model jaws are reversible for long life.

CouplersCatalog Part No. Alemite Model Thread Type Wt.

Price Each

•C1ZV22 6304-B Female 1/8 NPT Standard 0.11

•C1ZV32 308730-ALEMITE Female 1/8 NPT Narrow 0.07

Note: 308730A equipped with built-in check valve.

Swivel Couplers

Couplers swivel full 360°, locks in any of eight positions. Handy means of engaging out-of-the-way grease fittings. Use 1/8 NPT pipe extension to connect coupler to gun outlet.

Swivel CouplersCatalog Part No.

Alemite Model Description Wt.

Price Each

•C1ZU93 B6509-D Standard diameter, metal seal, 3-1/2 inches long 0.37

•C1ZU92 B6509-E Narrow diameter, rubber seal, 4 inches long 0.38




Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Swivels

Permits easy handling of control valves and prevents damage to hoses from twisting.

SwivelsCatalog Part No.

Alemite Model Type Threads Wt.

Price Each

•C1ZU95 B52750 Straight 1/4 NPT x 1/2-27 NS Taper 0.30

•C1JP84 B52751 90° 1/4 NPT x 1/2-27 NS Taper 0.62

•C1ZU94 B52752 Z-Type 1/4 NPT x 1/2-27 NS Taper 0.91

•C1GB62 B331107 Z-Type 1/4 NPT x 1/4 NPT 0.92

Grease Fittings

1/8 NPT Fittings: Used on many industrial machines. Features dirt excluding ball check. Maximum pressure 10,000 PSI.

1/4 NPT Fittings: Widely used for larger bearings on farm machinery and industrial equipment. Especially recommended for heavy lubricants in cold weather. Dirt excluding ball check. Maximum pressure 10,000 PSI.

1/4-28 Taper Thread Fittings: Used on most cars and trucks and on many industrial machines. Dirt excluding ball check. Maximum pressure 10,000 PSI.

Grease Fittings

Catalog Part No.

Alemite Model Thread Type

O.A. Length

(in)

Shank Length

(in)

Hex Size (in) Wt.

Price Each

•C1BW22 6000-ARO (Mfg is Aro) 1/8 NPT Extra Short

Straight 0.66 0.01

•C1ZV13B1610-BL (Package of 10)

1/8 NPT Extra Short Straight 11/16 0.30 7/16 0.15

•C1ZU99B1688-B (Package of 10)

1/8 NPT Extra Short 45° 0.89 0.30 0.44 0.23

•C1ZV12B1627-B (Package of 5)

1/4 NPT Extra Short Straight 7/8 0.42 9/16 0.17

•C1ZV11B1641-B (Package of 10)

1/4-28 Straight 35/64 0.19 5/16 0.07




Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Non-Corrosive Grease Fittings

Alemite non-corrosive fittings withstand the most severe corrosive conditions in both marine and industrial applications, and are never plugged by corrosion.

Stainless Steel Models: Identified by a -S in the model number, and 2 notches on hex. Type 303 stainless steel bodies, type 440 stainless steel balls and type 302 stainless steel tempered springs.

Monel Models: Identified by a -B in the model number, and 1 notch on hex. Nickel-copper alloy (monel) type R bodies, drawn full hard type R tips, type K monel balls and inconel springs.

Non-Corrosive Grease Fittings

Catalog Part No.

Alemite Model Thread Type

O.A. Length

(in)

Shank Length

(in)

Hex Size (in) Wt.

Price Each

•C1GF69 1961-S 1/8 NPT Stainless Extra Short Straight 3/4 7/16 0.02

•C1GF70 1966-S 1/4-28 Stainless Straight 17/32 5/16 0.01

Pocket Pack Grease Fitting Assortment

Box contains six types of popular fittings. An identifying chart is included in the cover.

Pocket Pack Grease Fitting AssortmentCatalog Part No.


Price Each

•C1ZV35 2365-1 (12) 1/8 NPT Straight, (6) 1/8 NPT 45, (6) 1/8 NPT 90, (12) 1/4-28 Straight, (6) 1/4-28 45, (6) 1/4-28 90 0.88

Metric Grease Fitting Assortment

Box contains six types of popular metric fittings. An identifying chart is included in the cover.

Metric Grease Fitting AssortmentCatalog Part No.


Price Each

•C1ZV34 2371 (10) M6x1 Straight, (6) M6x1 45, (6) M6x1 90, (6) M8x1 Straight, (6) M8x1 90, (10) M10x1 Straight 0.73




Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Button Head Couplers

Button Head CouplersCatalog Part No. Alemite Model Thread Type Wt.

Price Each

•C1ZV31 42030-A Female 1/8 NPT Standard Pull-On 0.29

Needle Nose Adapter

For use in all lubrication tight spots. Consists of contact nozzle and coupler locking sleeve.

Needle Nose AdapterCatalog Part No.


Price Each

•C1ZU91 B6783 Needle Nose Adapter, 5 inches long 0.24

Adapters

Bright zinc plated steel to resist corrosion.

AdaptersCatalog Part No.


Price Each

•C1ZV29 51942 Male 1/4-28 Taper Thread x Female 1/8 NPT 0.02

Couplings

CouplingsCatalog Part No.


Price Each

•C1ZV27 53495 Female 3/8 NPT x Female 1/2-27 NS Taper 0.14




Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Easy-Out Fitting Tools

All-in-one tool to extract broken fittings, re-thread holes and install new straight and angle-type fittings.

Easy-Out Fitting ToolsCatalog Part No. Alemite Model Description Wt.

Price Each

•C1ZU97 B315791 For fittings with 1/8 NPT thread 0.20

•C1ZU98 B315790 For fittings with 1/4-28 taper thread 0.12

Standard Control Valves

Features: Delivers pre-set, measured shots with trigger partially depressed. Provides continuous flow with trigger fully depressed. Includes 6-1/2 inch extension and 6304-B coupler. Female 1/4 NPT inlet.

Standard Control ValvesCatalog Part No. Alemite Model Description Wt.

Price Each

•C1ZV21 6320-3 Standard Control Valve, 1/4 NPT 2.82

Lever-Action Bucket Pump

Smooth, easy pumping action dispenses all types of Lubricants, even in the coldest weather. Ideal for transferring Motor Oil, Transmission Fluid, Differential Fluid, Heavier Oils and other Automotive Additives • Portable - Clamps to any 25-50 lb. 5 Gallon Pail • All Steel Pump. 1-1/2" Inlet and 1/2" Outlet Port • Heavy-duty, LuCast TM, Cast-Alloy Head with Heavier and Reinforced Wall Thickness for Extra Strength and Durability • Zinc Plated, Corrosion-resistant Suction Tube • Oil-resistant, Contoured Grip for Comfort and Firm Grip • Self Priming. Delivers 30 fl. oz. per 12 Strokes • Unit Includes : 18" long by 1-1/2" diameter Suction Tube with Rust Resistant 12" Ribbed Cover Assembly with adjusting screws to accommodate variations in drum diameter and 5 ft. Oil Resistant Flex Hose with Curved Nozzle.

Lever-Action Bucket PumpCatalog Part No. Lumax Model Description Wt.

Price Each

•C1JP26 LX-1300 Lever-Action Bucket Pump 6.99




Hydraulic P

ower &

Control

Pneum

atic Pow

er & C

ontrolF

luid Conveying

Miscellaneous P

roductsIndexes &



Plastic Bucket Pump with Flex Hose & Non-Drip Nozzle

Plastic Bucket Pump with Zinc-Plated Steel Tube for transferring Noncorrosive Fluids of Light to Medium Viscosity like, Engine Oil, Gear Oils, Transmission Fluid, Automotive Additives, Machine Oil, etc. • Self Priming, Push-down Action Pump • 5 Gallon Capacity • Drain-back Nozzle prevents Spills and Accidents • Precision Buna-n Seal eliminates by-pass • Nylon Piston for Durability • Zinc Plated, Corrosion-resistant Suction Tube • Includes : 50” Oil-resistant Flex Hose with Non-drip Nozzle • 1" Inlet Port and 1/4" Outlet Port • Discharge Capacity : 3 oz. per Stroke • Pump Height : 20”.

Plastic Bucket Pump with Flex Hose & Non-Drip NozzleCatalog Part No. Lumax Model Description Wt.

Price Each

•C1JP28 LX-1336 Plastic Bucket Pump 2.23

Lift-Action Steel Barrel Pump with Fixed Steel Spout

Zinc-Plated Steel Barrel Pump for transferring Non-corrosive Fluids of Light to Medium Viscosity like, Motor Oils, Transmission Fluid, Heating Oils, Machine Oil, Automotive Additives, Cleaning Solutions, Lacquer Thinner, Solvents, Diesel Fuel, Kerosene, etc. • Fits 55 Gallon Drums (210 l) with Standard 2" Bung Opening • Self Priming • Die-cast Head with Curved Metal Spout • Precision Buna-n Seal eliminates by-pass and Floating Steel Check Valve drains Liquid when not in use • Steel Piston for Durability • Comes with Adjustable 2" Bung Bushing • Zinc Plated, Corrosion-resistant Suction Tube • Discharge Spout can be rotated 180° and can be removed to expose Garden Hose threaded outlet • Discharge Capacity : 22 Fl. oz. per Stroke • 1-1/2" Inlet Port and 3/4" Outlet Port • Pump Height : 42".

Lift-Action Steel Barrel Pump with Fixed Steel SpoutCatalog Part No. Lumax Model Description Wt.

Price Each

•C1JP27 LX-1330 Lift-Action Piston-Type Barrel Pump 4.23




Hyd

raul

ic P

ower

& C

ontr

olP

neum

atic

Pow

er &

Con

trol

Flu

id C

onve

ying

Mis

cella

neou

s P

rodu

cts

Inde

xes

& T

echn

ical

Info

rmat

ion


Deluxe Heavy Duty Rotary Action Hand Pump

Precision Engineered, Heavy Duty Aluminum Die Cast Body Pump for transferring Non-corrosive Petroleum based fluids of Light to Medium Viscosity • Ideal for Heavy-duty use in Industrial, Automotive and Agricultural applications • Fits 15 to 55 Gal. Drums (57 to 210 l) with Standard 2" (50 mm) Bung Opening • 40" (1 m) long Zinc Plated, Corrosion-resistant Suction Tube • Self Priming. Heavy-duty Vanes allow better draw and smooth delivery of Fluids • Non-slip, Oil Resistant Grip with for Comfort and Safer Operation • Comes with Adjustable 2" (50 mm) Bung Bushing and with 39" (1 m) Flexible, Oil-resistant Discharge Hose • 1-1/4" (32 mm) Inlet Port and 1" (25 mm) Outlet Port • Discharge Capacity : One Gallon (3.8 l) per 12 Revolutions • Pump Height : 4.3 ft. (1.3 m). Maximum Discharge Height : 16.5 ft. (5 m)

Deluxe Heavy Duty Rotary Action Hand PumpCatalog Part No. Lumax Model Description Wt.

Price Each

•C1KM72 LX-1320 Rotary Action Transfer Pump 7.50

Funnels

FunnelsCatalog Part No. Lumax Model Description Wt.

Price Each

•C1JP30 LX-1604 48 oz. All-Purpose Plastic Funnel with Hanging Tab. 0.18

•C1JP31 LX-1608 6 Quart All-Purpose Plastic Funnel with Hanging Tab. 0.54

•C1JP29 LX-1600 8 oz. All-Purpose Plastic Funnel with Hanging Tab. 0.08

•C1JP32 LX-1614

Long Neck Utility Funnel for Hard-To-Reach Applications. 5" Diameter x 18" long with 1/2" Tip. With Hanging Tab.

0.28

Drain Pans

Drain PansCatalog Part No. Lumax Model Description Wt.

Price Each

•C1JP35 LX-1710

6 Gallon Galvanized Drain Pan. 19" Diameter x 6" Deep. Heavy-Duty with Ribbed Bottom. Anti-Splash Baffle. Handles.

4.00

•C1JP34 LX-1632

15 Quart Drainmaster Drain-Direct Pan with Handle & Wheels. 8" Opening with Screw Cap. Catch-All Basket to Retrieve Drain Plug and Filter. O-ring Seal.

2.70

•C1JP33 LX-16286 Quart Plastic Drain Pan with Pouring Lip and Raised Rim Handles. 12" Diameter x 4" Deep.

0.66


Documents

Miscellaneous Products - Hydraulic Supply Company€¦ · Seals Hydraulic Power & Control Pneumatic Power & Control Fluid Conveying Miscellaneous Products Indexes & Technical Information