Upload
roberta-flowers
View
217
Download
2
Tags:
Embed Size (px)
Citation preview
MiPACSIntroduction for Sunset
Launching MiPACS
1. Logon to AxiUm and select the patient from the AxiUm Rolodex or Scheduler
2. Launch MIPAC with x-ray icon from AxiUm(Only click once on Icon) The patient open in AxiUm should automatically be selected
3. Verify the patient name and patient ID in the title bar of MiPAC. **If the patient information is incorrect, go back to step 1 to locate the correct patient
2
Activation Capture Icons
3
1. Activate capture icon as needed:
Gendex= Pano=
Optime= Intraoral=
Gendex Activation
For every image, verify the Gendex icon is active
In the task bar at the bottom right of the computer, verify the Gendex icon turns from red X on sensor
to green around sensor
4
Selecting a Template
5
Viewing an Image Series
6
Viewing an Image SeriesRed corner indicates series is not approved
Yellow barrel indicates series is approved
7
Viewing an Image Series
Expanding series viewer Shows dateClick on line and drag # of images in series
8
Removing Series Box
9
Removing Series BoxShows only the images on screen
10
Series Box Returned
11
Overflow Area
12
Overflow Area
13
Retake/Add an Image
14
Save Vs. ApproveAfter all images have been exposed and positioned in correct location in template, click the save as button.
In pop up box, uncheck the “Approve all images” then click ok.
Repeat this step as often as needed until ready to approve images.
When ready to approve, click save as button again. This time do not uncheck the “Approve all images” box. Click Ok. Images will now be saved on the central server.
15
Saving: Click on save as button.Box will pop up. Uncheck the Approve all images box
Click OK
16
Save Vs. ApproveWhen ready to approve, Click save as boxBox will pop up. This time do not uncheck the approve all images box, Click OK. Can no longer add to template
17
Anatomical Naming
18
• If image goes into a generic PA template or the overflow area and does not load into template first, a pop up box will ask for the anatomic information
• This must be filled in before the series will approve
Anatomical Naming
19
Remounting a Series
20
Rotating an Image
21
Brightness/Contrast
22
Undo/Redo
23
Enlarging Image / Zoom
24
Magnifier
25
Comparing Two Series
26
Comparing Two Series
27
1. In Series, choose approved images you would like to view
2. Highlight series you want3. Hold control and click to
highlight the other series you want
4. Right click-Compare5. To leave this screen click on
the Series tab
Comparing Images with Presentation Tool
Removing the Date From the Image
29
Go to Systems at top of tool bar Preferences Display Uncheck box for “Show info
Label on Image” Click OK
**Note-This is done per workstation per provider, and date can be replaced the same way.**When you close out of the workstation, the information will be saved on that workstation under your sign in
Important Tips
30
Always check that correct patient is open Understand the difference between saving and approving
images Saving images: Saves to local server only, can add or retake images. Can
only be view locally. Approving images: Sends images to central server. Cannot add to the
template. Can now be view by other offices. Need to do at end of appointment.
MUST close patient in MiPACS and go back into axiUm to locate and open next patient. This can cause computer to crash, taking axiUm down with it.