Upload
api-3727060
View
120
Download
0
Tags:
Embed Size (px)
Citation preview
Document identification:Code: DEM 01.02Version: 0.0.2Status: Draft
© Copyright Ministry of Defence
Ministry of Defence / DMO / WSB / LA / C2 Support CentreC2SC/MIP DEM
MIP - DEM Gateway 2.0 User - SUM
UNCLASSIFIED
PREFACE
Version history
Version Date Author(s) Description: Status
0.0.1 03012006 M. Fuchs Initial version. Pictures are not correct and to illustrate actions only.
Draft
0.0.2 15012006 M. Fuchs Draft. Comments development added. Added section “Show MIP Exchangeable objects only”.
Section “The MIP DEM concept” will probably need an adaption.
Draft
Version coding
x.y.z.:
x = New version of the application, documentation included. ‘y’ and ‘z’ will be set to 0 in the version coding. Status is Final.
y = Temporary release of the documentation based on approval C2SC/S&T; ‘z’ will be set to 0 in the version coding. Status is Draft.
z = New version of the documentation, ready for internal approval by the project team only. Status is Draft.
Document references
Doc. Code Version Version date Title
DEM 01.01 MIP – DEM Gateway 2.0 Operator SUM
ISS 01.01 ISIS 4.0 - SUM
DEM 01.02; Version 0.0.2; document.doc ii Ministry of Defence / DMO / WSB / LA / C2SC
PREFACE
Contact information
C2SC Front Office
TelephoneCIVIL: 0318 - 683636 ((+31)318683636)MDTN: *06 - 678 83636
FaxCIVIL: 0318-681545 ((+31)318681545)MDTN: *06-678-81545
GSM (+31)612995745
Email: Internal:
c2sc/st/frontoffice External:
Postal address Elias BeeckmankazerneMPC 41 AP.O. Box 90126710 HC EdeThe Netherlands
Visiting addressElias BeeckmankazerneNieuwe kazernelaan 10Building: 3 Room: 20/216711 JC EdeThe Netherlands
Used sub documents for this manual(for C2SC documentation purposes only)
Introduction ISIS for MIP User.doc Managing Operational Information Groups.doc Exchanging objects between C2 Information Systems.doc Authorization settings.doc
DEM 01.02; Version 0.0.2; document.doc iii Ministry of Defence / DMO / WSB / LA / C2SC
TABLE OF CONTENTS
Preface.......................................................................................................ii
Version history.....................................................................................iiVersion coding.....................................................................................iiDocument references..........................................................................iiContact information............................................................................iii
Introduction ISIS for MIP User................................................................1
General introduction...............................................................................1
C2IEDM..............................................................................................1
The MIP DEM concept............................................................................1
Data Exchange Mechanism solution...................................................1
Scope and Structure SUM......................................................................2
Managing Operational Information Groups...........................................3
Introduction Managing operational Information groups..........................3
Overview OIGs.......................................................................................3
OIGs in the library...............................................................................3OIGs on the GIS / overlay...................................................................4
Exchanging objects between C2 Information Systems........................5
Introduction exchanging objects between C2 Information Systems.......5
Create a MIP exchangeable object on a national context......................5
Copy/ paste the object to an international OIG.......................................6
Aggregate objects...................................................................................7
Authorization settings.............................................................................8
Introduction authorization settings..........................................................8
Setting the OIG authorization.................................................................8
Index...........................................................................................................9
DEM 01.02; Version 0.0.2; document.doc iv Ministry of Defence / DMO / WSB / LA / C2SC
INTRODUCTION ISIS FOR MIP USER
GENERAL INTRODUCTION
Notitie voor Betatesters: De afbeeldingen in deze SUM zijn incorrect (in elke afbeelding worden de context entries met ownerrights – groene kleur- aangegeven). De juiste afbeeldingen dienen in de betatestomgeving te worden gemaakt.
The Application MIP – DEM is part of the Multilateral Interoperability Programme solution (MIP solution). The MIP solution enables information exchange between co-operating but distinct national C2 Systems. It allows users to decide what information is exchanged, to whom and when.
C2IEDM
The core of the MIP solution is the C2 Information Exchange Data Model (C2IEDM). The DEM (Data Exchange Mechanism) is used to exchange the information stored in the C2IEDM.
THE MIP DEM CONCEPT
The Data Exchange Mechanism is an automatic data push mechanism. If the information in a C2 Information System (C2IS) is changed, this is recognized by the DEM. The change in information is automatically replicated (disseminated) to all MIP nations that have a subscription for this particular information.
Data Exchange Mechanism solution
The Data Exchange Mechanism solution is depicted hereafter.
NLD
ISIS
C2WS DB
ISISISIS
C2WS DB
MCIC2IEDMC2IEDMC2IEDMC2IEDM
NATIONAL
C2IS (B)NATIONAL
C2IS (B)NATIONAL
C2IS (B)
ODB
INTERNATIONALMIP SOLUTION(Lingua Franca)
INTERNATIONALMIP SOLUTION(Lingua Franca)
NATION B
MAPPING
MAPPING
CONTEXT
CONTEXT
CONTEXT UPDATE
CONTEXT UPDATE
12
4 4
5 5
3
The solution consists of the following elements:
Configuring the Gateway. To enable data transfer, the local node needs to be configured; remote node(s) need to be added and data transfer sessions need to be opened. This process is described in the chapter “Configuring the Gateway”.
Mapping of Operational Information Groups (OIGs). An OIG is a collection of data (units, control features etc.) that can be compared with a ‘Context’ in ISIS. In the mapping phase, the information in an OIG is ‘translated’ to the corresponding information in the ISIS context (and vice versa). MIP rules specify how this information is disseminated to other units. How to create an OIG for the MIP Gateway, so that the OIG can be disseminated, is explained in the chapter “Managing OIGs”.
Propose a Contract. A contract is an agreement between different MIP nations to receive and deliver particular information. A contract is proposed by the MIP nation that wants to send information. How to manage contracts is explained in the chapter “Managing contracts”.
DEM 01.02; Version 0.0.2; document.doc 1 Ministry of Defence / DMO / WSB / LA / C2SC
INTRODUCTION ISIS FOR MIP USER
The data will be received by the operational database of the MIP nations and the C2IS systems of the nations will be updated.
When the user updates information in the national C2 System, the updates are converted into updates to the appropriate OIGs in MIP. In ISIS the rights of the contexts have to be set properly in order to allow the MIP Gateway to translate the data. How to use the C2 Information System as a MIP user, is described in the MIP – DEM Gateway 2.0 User – SUM (Code: DEM 02.01).
As can be read from the DEM process, DEM involves two processes: Creation of contracts and setting up connections. The MIP Gateway
is used for this purpose. Setting authorization rights and reading / preparing data in the C2IS.
The C2 Workstation is used for this purpose.
SCOPE AND STRUCTURE SUM
The scope of this SUM is to explain how to enable the exchange of operational information between C2 Information Systems (C2 IS) of different MIP nations. This involves the reading and preparing of Operational Information Groups (OIGs) and setting the authorization rights for each OIG on the (local) C2 IS. The actions described in this SUM have to be performed in the local environment; the actions on the MIP DEM Gateway are outside the scope of this SUM.
How to use the MIP DEM Gateway for Data exchange management is explained in the MIP - DEM Gateway 2.0 Operator – SUM. Code: DEM 01.01.
The SUM has been organized according to the workflow for reading and organizing OIGs. The examples are based on the C2 Information System “ISIS”. If another C2 Information System is used, please consult the manual for that information system when necessary.
DEM 01.02; Version 0.0.2; document.doc 2 Ministry of Defence / DMO / WSB / LA / C2SC
MANAGING OPERATIONAL INFORMATION GROUPS
INTRODUCTION MANAGING OPERATIONAL INFORMATION GROUPS
An Operation Information Group (OIG) is an international context with information for international purposes. The information is grouped and disseminated automatically according to MIP rules. The OIG is used as container within which specific information can be added and removed. Each international OIG is shared with MIP nations if they are subscribed to the OIG. These nations have reading rights on the OIG (see section “Setting the OIG authorization”).
OVERVIEW OIGS
The following types of OIGs exist: CORENU. Correlated unknown enemy. FRDNEU. Friendly and neurtralneutral organizational. FRNENO. Friendly and neurtralneutral non – organizational. GLBSGN. Globally significant. UNCORR. Uncorrelated enemy and unknown. COMPLN. Composed plan.
In one mission, there can be several OIGs of the type “Specific plan complete”. Therefore, each plan OIG is identified with a number.
The Gateway will update your OIG overview, each time an update is available. Ask the Gateway Operator to delete the OIG contract if the particular OIG is of no longer use (for example if the mission has ended).
The content of the OIG and the dissemination is prescribed in the MIP Operational Handbook.2.6.
OIGs in the library
2
1
An OIG in the library can be recognized by its extension (GLBSGN for example).Store different types of context entries in sections. This way, it is easy to recognize several kinds of context entries.
How to create a section is explained in the section “Create a library entry” in the chapter “Library”, ISIS 4.0 – SUM (code: ISS 01.01).
DEM 01.02; Version 0.0.2; document.doc 3 Ministry of Defence / DMO / WSB / LA / C2SC
MANAGING OPERATIONAL INFORMATION GROUPS
OIGs on the GIS / overlay
1
An OIG can also be recognized on the GIS overlay tab by its extension name.
New OIGs in the overview are marked green.
DEM 01.02; Version 0.0.2; document.doc 4 Ministry of Defence / DMO / WSB / LA / C2SC
EXCHANGING OBJECTS BETWEEN C2 INFORMATION SYSTEMS
INTRODUCTION EXCHANGING OBJECTS BETWEEN C2 INFORMATION SYSTEMS
On an OIG, objects can be placed and exchanged.To exchange objects, do the following: Create a MIP exchangeable object on a national context. Copy the object as a shortcut to an international OIG.
Optionally, aggregate objects on the OIG. Aggregation is used to dense the information. For example: Send the company information only, instead of sending information about all platoons separately.
CREATE A MIP EXCHANGEABLE OBJECT ON A NATIONAL CONTEXT
Not all the object types can be identified by the C2 IS of the other MIP nation. To create an object type that can be identified by the C2 IS of the other MIP nation, create a MIP exchangeable object on the national context.
3
2
1
Click the button Library from the launch menu to open the library.Open the national context from the library.Click the option Create a new object from the toolbar. The property window opens.
1
Check the box Show MIP exchangeable types only to show the MIP exchangeable objects only.The objects in the following categories are MIP compliant: Unit. Task. Command and Control. Mobility/ Survivability. Fire support. Combat Service Support. MOOTW.
DEM 01.02; Version 0.0.2; document.doc 5 Ministry of Defence / DMO / WSB / LA / C2SC
EXCHANGING OBJECTS BETWEEN C2 INFORMATION SYSTEMS
How to create an object in ISIS is explained in the section “ Create an object” in the chapter “ Objects and object manipulation”, ISIS 4.0 – SUM (Code: ISS 01.01).
.
1
If the object is not MIP compliant, the other MIP nation will see the object
indicated with the symbol “Not Otherwise Specified” ( ).
The local MIP nation can always identify objects which are created on the national context. These objects are never indicated with the symbol “Not Otherwise Specified”. Therefore, describe each created object. Descriptions and description
format is agreed for each mission or operation separately.
COPY/ PASTE THE OBJECT TO AN INTERNATIONAL OIG
To share the local operational data, copy the data to the international OIG(s). Use the option Paste as short cut to create a short cut between the object and the international OIG.
2
3
1
4
Copy the object from the national context and open the overlay of the international OIG.
How to copy an object in ISIS is explained in the section “Copy and paste objects” in the chapter “Objects and object manipulation”, ISIS 4.0 – SUM (Code: ISS 01.01).
Right click on the map. The dropdown menu opens. Select the option Paste special. The second dropdown menu opens.
Select the option Paste as short cut.
DEM 01.02; Version 0.0.2; document.doc 6 Ministry of Defence / DMO / WSB / LA / C2SC
EXCHANGING OBJECTS BETWEEN C2 INFORMATION SYSTEMS
The object is copied from one OIG to another. If the object is changed in the national context, all MIP nations with a contract for the OIG will see the changes as long as the short cut is available.
Click the button Save or Save all to activate the changes. All MIP nations contracted to this OIG will see the changes.
AGGREGATE OBJECTS
Aggregation is a method to fuse individual information records into new information. Aggregation helps to ensure relevant levels of command are able to maintain situational awareness because the information overload is reduced.
For example: a MIP nation can spread information about all platoons, instead: it can aggregate this information by only sending its company information.
Be aware that the aggregated objects will not automatically be updated by changes in the national contexts.
Agreements on aggregated information are explained in the MIP Operational Handbook 2.6. Application of the rules is agreed for each mission or operation separately.
DEM 01.02; Version 0.0.2; document.doc 7 Ministry of Defence / DMO / WSB / LA / C2SC
AUTHORIZATION SETTINGS
INTRODUCTION AUTHORIZATION SETTINGS
The national environment and the Gateway are configured in different domains. To enable other MIP nations to read and / or modify information on the OIG, the user rights for each national MIP context and international OIG the authorization settings need to be configured.
The following user roles are available:
MIP Owner. A user with MIP owner – rights on an OIG can modify and publish this OIG.
MIP Schrijven. A user with MIP schrijven – rights on an OIG can modify this OIG.
MIP Lezen. A user with MIP lezen – rights on an OIG can only read the OIG.
SETTING THE OIG AUTHORIZATION
Different authorization rules apply, depending on the kind of OIG:
If the OIG is a national MIP context, the following rules apply: MIP OWNER. The MIP OWNER should have owner rights. MIP SCHRIJVEN. The MIP SCHRIJVEN should have write rights. MIP LEZEN. The MIP LEZEN should have read rights.
If the OIG is international, the following rules apply: MIP OWNER. The MIP OWNER should have owner rights. MIP SCHRIJVEN. The MIP SCHRIJVEN should have read rights. MIP LEZEN. The MIP LEZEN should have read rights.
How to set or change the authorization of an entry / OIG is explained in the section “ Set / change authorization on an library” in the chapter “ Library”, ISIS 4.0 – SUM (code: ISS 01.01). In order to communicate with the Gateway, the rights of the Gateway should be exactly the same as the user rights.
DEM 01.02; Version 0.0.2; document.doc 8 Ministry of Defence / DMO / WSB / LA / C2SC
INDEX
A
Aggregate objects 7Aggregation 5, 7Authorization rules 8Authorization settings 8
C
C2 IEDM 1C2 Information Exchange Data Model (C2 IEDM) 1Change the authorization of an entry 8Container 3copy / paste object 6Create a MIP exchangeable object 5
D
Data Exchange Mechanism 1Data exchange mechanism solution 1
M
MIP 1MIP compliant objects 6MIP Lezen 8MIP Owner 8MIP rules 3MIP Schrijven 8Multilateral Interoperability Programme (MIP) 1
N
National environment 8National MIP context 8
Not Otherwise Specified symbol 6
O
Operation Information Group (OIG) 3
P
Place objects on an OIG 5
S
Set / change authorization on an library 8Share the local operational data 6Show MIP exchangeable types 6Specific plan complete 3
T
Types of OIGs 3
U
User roles 8
DEM 01.02; Version 0.0.2; document.doc 9 Ministry of Defence / DMO / WSB / LA / C2SC
INDEX
DEM 01.02; Version 0.0.2; document.doc 10 Ministry of Defence / DMO / WSB / LA / C2SC