MINT lift® Specification

Product name MINT lift® MINT lift® mini

Raw material Polydioxanone (PDO)

Thread length 43 (cm) 17 (cm)

Pack 2 threads / 1 pack

USP 1-0(0.40mm)

Additional instrumentfor treatment

17G cannula &temporal needle 17G cannula

Multiple use Single use only

No. Cogs 82 28

MFDS Approved asFacial lifting thread

Registered in FDAfor suture

Minimal Invasive Non-Surgical Thread

수출용에 한하여 허가 받은 품목(제허 16-436호)

807, 55, Seongsuil-ro, Seongdong-gu, Seoul, KoreaTel. +82-2-466-2266 www.mintlift.com

W1607

www.HansBiomed.com

MINT lift ® 43cm & 17cm

Most Common Indications

MIddle & loWer face•

JaW lINe•

double chIN•

NaSolabIal lINe•

ENTRY POINTS END POINTS

Recommendlocal anesthesia

Lasting up to12 months1year

Completed in15 minutes15mins

Less traumaNo pain

MINT lift® 43cm & MINT lift® mini 17cm

FACI

AL

TISSUE FIXATION

THREAD FOR

MFDS APPROVED ABSO

RBABLE POLYDIOXANONE

SURGICAL SUTUREFDA REGISTERED

www.HansBiomed.com

MINT lift® mini 17cm

MINT lift® mini 17cmMINT lift® 43cm

Patented HelicalMolding Structure

What is MINT lift ® ?

Patent 1.

Barbs of MINT lift® are produced by patented molding press technology (Pressing method), not by cutting technology like other threads.

Four (4) times stronger lifting effect than other threads.

International Patent Applications in 10 Countries(Patented No. Act CPCTP11 – 0007)

Patent 2.

360 degree (3D) helical barbs provides strong anchoring & tensile strength by fixing and supporting the skin tissue in various directions, which maximizes the lifting effect. If the thread barbs are in a straight line, it is hard to lift the 3D structure of skin tissue. This is why 360° (3D barbs) are needed to fi x and support the tissues in all directions with 360 degree protrusion.

Optimally designed cogs maintain its shapes for long duration time and give patients optimal lifting effect for sagging skin.

3D Surface with 360° Helical Barbs of MINT lift®Test: Insert MINT lift® in Saline solution for 2 months

MINT lift®, is a safe and effective molding PDO thread to lift soft tissues in sagging skin, has gotten approval by FDA and MFDS. It is minimal invasive treatmentwithout scars and trauma, back to daily life right after the procedure.

Human tissue is consisted of 3D structure thus hard to expect to see great result with a thread unless it has 3D helical type of barbs whereas MINT lift®, has 360 ˚ degree of helical barbs around the threads has been secured by Patent Act, creates strong pull-ing effect and fixing the facial tissue in various directions effectively. This is what makes MINT lift® special.

For some countries including Indonesia and Thailand, it is strictly prohibited to use a thread that are not registered as lifting indication.

MINT lift® is registered as a lifting thread and has been used in more than 15 countries including Asia, Latin America and middle east.

As for Class 4 medical grade device, clinical test results prove the lifting effect of MINT ift®.

-

-

-

MINT lift® has its patented on manufacturing process, which secure the technology from other competitor infringe patent rights.

Unique production method

Less damage to a thread by molding production method enables MINT lift® to stay stronger in pulling sagging skin.

Anchoring Strength

MINT lift® has 0.400-0.499mm of diameter which is UPS Size 1-0 for stronger tensile strength.

Tensile Property

Degradation of Barbs

0 week 1 weeks 2 weeks 2 months

Raw suture material

PRESS

PRESS MOLDING

Approved as a lifting threadin several countries

Clinical studies forlifting effect

The first absorbable threadconducted a clinical trial

MINT lift ® for face lifting

Minimal Invasive Non-Surgical Thread

* MINT has been proven as registered in USA FDA, 2012.

Approved as Facial fixation lifting thread[Act 16-436]

FDA 510(k) cleared

ABSO

RBABLE POLYDIOXANONE

SURGICAL SUTURE

FDA REGISTERED

FACIAL TISSUE FIXATION

THREAD FOR

MFDS APPROVED