7
0.3 mm pitch, Horizontal mating, Backflip, Mechanical lock, (Height = 0.9 mm) High FPC retention force with additional mechanical lock Structure to prevent contact distortion Usability for closing actuator without FPC High FPC Retention Force with Additional Mechanical Lock Short Actuator LK Type Long Actuator LK Type MINIFLEX ® 3-BFN LK MINIFLEX ® 3-BFN 11.34 N 6.7 N FPC retention force comparison (19 p) Lock FPC with cutout FPC LOCK mechanism maintains high FPC retention force Type Short Actuator LK Long Actuator LK Part Number 20599 20584 Contact Pitch (mm) 0.3 0.3 Board Pitch (mm) 0.6 0.6 Height (mm) 0.90+/-0.10 0.90+/-0.10 Width Formula (mm) 2.1 + (0.3*?p) 2.1 + (0.3*?p) Depth(mm) Actuator Open 2.55 2.55 Actuator Close 3 3.5 Wiping Length (mm) Contact A 0.9 0.9 Contact B 0.45 0.45 FPC Insertion Depth (mm) 1.1 1.1 FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom Compatibility Original Original *Please inquire for pin counts not listed as available or outside of the pin count range. Pin counts: Type Short Actuator LK Long Actuator LK Range Up to 37 (odd) Up to 71 (odd) Available 9, 11, 13, 15, 17, 19,21, 23, 25, 27, 29,31, 33, 35, 37 51, 53, 57, 61, 71 MINIFLEX ® 3-BFN LK Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0 Structure to Prevent Contact Distortion Connector will still function reliably (contact gap graph 35 pins before and after operating actuator without FPC inserted) Retention force of connector does not change greatly Insertion force of connector goes up The connector will still function even if the actuator is accidentally closed without the FPC being inserted after the SMT process. 0.188 0.169 0.168 0.166 0.165 0.164 0.203 0.176 0.175 0.174 0.175 0.173 0.00mm 0.10mm 0.20mm 0.30mm Initial 1 time 2 times 5 times 10 times 20 times Contact-A Contact-B Ribs When opening the actuator, the ribs will prevent the contacts from being pulled up. Ribs Contact Usability for Closing Actuator without FPC

MINIFLEX 3-BFN LK - Home | I-PEX · 2020-06-16 · FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom *Please

  • Upload
    others

  • View
    7

  • Download
    0

Embed Size (px)

Citation preview

Page 1: MINIFLEX 3-BFN LK - Home | I-PEX · 2020-06-16 · FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom *Please

0.3 mm pitch, Horizontal mating, Backflip, Mechanical lock,(Height = 0.9 mm)

High FPC retention force with additional mechanical lockStructure to prevent contact distortion

Usability for closing actuator without FPC

High FPC Retention Force with Additional Mechanical Lock

Short Actuator LK Type

Long Actuator LK Type

MINIFLEX® 3-BFN LK MINIFLEX® 3-BFN

11.34 N 6.7 N

FPC retention force comparison (19 p)

Lock

FPC with cutout

FPC LOCK mechanism maintainshigh FPC retention force

Type Short Actuator LK

Long Actuator LK

Part Number 20599 20584Contact Pitch (mm) 0.3 0.3Board Pitch (mm) 0.6 0.6

Height (mm) 0.90+/-0.10 0.90+/-0.10Width Formula (mm) 2.1 + (0.3*?p) 2.1 + (0.3*?p)

Depth(mm)

Actuator Open 2.55 2.55

Actuator Close 3 3.5

Wiping Length (mm)

Contact A 0.9 0.9

Contact B 0.45 0.45FPC Insertion Depth

(mm) 1.1 1.1

FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03Current Rating 0.3A /pin 0.3A /pin

Contact point Top and Bottom

Top and Bottom

Compatibility Original Original*Please inquire for pin counts not listed as available or outside of the pin count range.

Pin counts:Type Short Actuator LK Long Actuator LKRange Up to 37 (odd) Up to 71 (odd)

Available 9, 11, 13, 15, 17, 19,21, 23,25, 27, 29,31, 33, 35, 37 51, 53, 57, 61, 71

MINIFLEX® 3-BFN LK

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Structure to Prevent Contact Distortion

Connector will still function reliably (contact gap graph 35 pins before and after operating actuator without FPC inserted)

Retention force of connector does not change greatly

Insertion force of connector goes up

The connector will still function even if the actuator is accidentally closed without the FPC being inserted after the SMT process.

0.188 0.169 0.168 0.166 0.165 0.164

0.203 0.176 0.175 0.174 0.175 0.173

0.00mm

0.10mm

0.20mm

0.30mm

Initial 1 time 2 times 5 times 10 times 20 times

Contact-AContact-B

Ribs

When opening the actuator, the ribs will prevent the contacts from being pulled up.

Ribs

Contact

Usability for Closing Actuator without FPC

Page 2: MINIFLEX 3-BFN LK - Home | I-PEX · 2020-06-16 · FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom *Please

MINIFLEX® 3-BFN LKComponent Parts Detail

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Connector Assembly :

Rev.13

Page 3: MINIFLEX 3-BFN LK - Home | I-PEX · 2020-06-16 · FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom *Please

Connector Assembly :

Rev.13

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Connector Assembly :

Rev.13

Page 4: MINIFLEX 3-BFN LK - Home | I-PEX · 2020-06-16 · FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom *Please

Connector Assembly :

Rev.13

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Connector Assembly :

Rev.16

Page 5: MINIFLEX 3-BFN LK - Home | I-PEX · 2020-06-16 · FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom *Please

Connector Assembly :

Rev.16

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Connector Assembly :

Rev.16

Page 6: MINIFLEX 3-BFN LK - Home | I-PEX · 2020-06-16 · FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom *Please

Connector Assembly :

Rev.16

Contact your sales representative for more detailed information. [ i-pex.com ] 202008R0

Connector Assembly :

Rev.16

Page 7: MINIFLEX 3-BFN LK - Home | I-PEX · 2020-06-16 · FPC Thickness (mm) 0.2+/-0.03 0.2+/-0.03 Current Rating 0.3A /pin 0.3A /pin Contact point Top and Bottom Top and Bottom *Please

Connector Assembly :

Rev.16

I-PEX, MHF, CABLINE, NOVASTACK, EVAFLEX, MINIFLEX, ISH, IARPB, IASLP, ESTORQ, i-Fit and ISFITare registered trademarks of I-PEX Inc. Please note that the contents in the catalog might bechanged without prior notification. I-PEX Inc. assumes no responsibility for any inaccuracies orobligation to update Information on these documents. Please be sure to read and understand thelatest "Precautions for Use" and "Instruction Manual" before you use our products. We shall not beresponsible for any defects, damages or troubles in case you use our products without followingthe precautions for use. Please feel free to contact our sales representatives when you use ourproducts for any applications that require very high reliability and safety, or that relate to humanlife (ex. nuclear power control, aerospace, transportation, medical equipment, safety equipment etc.).

Contact your sales representative for more detailed information. [ i-pex.com ]

Copyright © I-PEX Inc. 2020. All rights reserved.

202008R0