Miniature Valve Products - ASCO Valve Net

Table of Contents
Introduction Analytical Technologies 4 Medical Technologies 5 Application Examples 6 Engineered Solutions 8 Descriptions of Valve Technologies 10
Isolation Valves 055 Series: 25mm, PTFE Diaphragm, 2-Way & 3-Way 23 067 Series: 10mm, Rocker, 2-Way & 3-Way 26 068 Series: 16mm, Flapper, 2-Way & 3-Way 30 068 Series: 22mm, Flapper, 2-Way & 3-Way 34 068 Series: Proportional, Flapper, 2-Way 38 282 Series: 8mm, Diaphragm, 2-Way 40 282 Series: 17mm/30mm, Diaphragm, 2-Way High Flow, M5 & G1/8 42 282 Series: 32mm, Diaphragm, 2-Way High Flow, G1/4 44 283 Series: Lever Mechanism, 2-Way with Spigots 46 283 Series: Lever Mechanism, 3-Way with Threaded Connections 48 296 Series: Bellows Mechanism, 2-Way High Flow 50 330 Series: 21mm/25mm, PTFE Diaphragm, 2-Way 52 385 Series: 16mm, Rocker, 3-Way 55 396 Series: Bellows Mechanism, 3-Way High Flow 57 458 Series: 19mm, Rocker, 2-Way & 3-Way 59
Pinch Valves 045 Series: 2-Way 61 284 Series: 2-Way Aluminum Body 64 284 Series: 2-Way POM Body 67 373 Series: 3-Way 69 384 Series: 3-Way Aluminum Body 71 384 Series: 3-Way POM Body 73
General Service Valves 065 Series: 15mm, Flat Spring, 2-Way & 3-Way 75 065 Series: Flat Spring, 2-Way & 3-Way 77 188 Series: 10mm, 3-Way 81 188 Series: 10mm, 3-Way with Latching Coil 84 188 Series: 10mm, 3-Way High Flow 88 411 Series: 19mm, 2-Way & 3-Way 92 RB Series: 15mm, 2-Way & 3-Way 95 S Series: 19mm, 2-Way 100 S Series: 19mm, 3-Way 102
Table of Contents
Proportional Valves 202 Series: 12.7mm Preciflow, 2-Way, Pad-Mount 104 202 Series: 15mm Preciflow, 2-Way, M5 & G1/8 106 202 Series: 19mm Preciflow, 2-Way, Cartridge Style 108 202 Series: 19mm Preciflow IPC, 2-Way, G1/8, Pad-Mount & Cartridge Style 110 202 Series: 22mm Posiflow, M5 & Pad-Mount 112 202 Series: 45mm Posiflow, G1/8 114 630 Series: Size 15 Piezotronic, 2-Way 116
Manifold Assemblies 451 Series: Custom Manifold Assemblies for Series 411 & Series RB 118
Tubing Pinch Valve Tubing & Guide 121
Electrical Control Devices 603 Series: ControlD 122 908 Series: Electronic Control Unit 124
Accessories 881 Series: DIN Electrical Connectors 126 881 Series: Sizes 22 & 30 Power-Save Connectors 130
Engineering Information Product Information 132 Chemical Resistance Guide 136 Conversion Tables 140
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.
NOTES
1
In addition to our comprehensive catalog product offering, we have the expertise to create customized assemblies that provide the precise solution to meet your fluid control needs. Whether you need a minor modification of a catalog product or a complete flow control solution, our trained sales and engineering teams are ready to assist. For more information and the latest offerings of ASCO products please visit our website www.asco.com or contact your local ASCO representative or distributor.
• In-vitro Diagnostics • Oxygen Concentrators & Conservers • Hematology • Hospital Equipment • Ventilators • Dialysis
• Chromatography • Dental • DNA Sequencers • Sample Preparation • Surgical Therapy • Patient Monitoring
Wherever manufacturing or processing happens, ASCO’s fluid automation solutions help customers to maximize efficiencies and optimize their applications. Our global scale increases speed to market and shapes how we work with customers. Our deep expertise across applications rapidly transforms ideas into measurable outcomes. While our people create innovative solutions that set the industry standard and exceed customer expectations by anticipating what’s next. At ASCO, we engineer the highly reliable products and solutions that enable customers to see the future, transform industries, and shape a more productive world. We have one of the largest offerings of miniature Isolation, Pinch, Proportional, and General Service valves to reliably control gases and liquids for Analytical and Medical market applications. To adhere to the quality and reliability standards necessary for today's applications, all valves are 100% factory tested before being shipped to our valued customers. Our miniature valves can be found throughout the world in applications such as:
2
with positive pressure HEPA air filtration system monitored daily
• Staff members enter and leave through airlocks with air shower stage and wear protective hair nets, finger cots, shoe covers, lab coats, and masks (when required) to reduce contamination potential
• Environmental controls for humidity and temperature
• Valve components are ultrasonically cleaned to remove any contaminate prior to assembly
• Components are lubricated with oxygen-compatible PFPE (perfluropolyether) grease and oil, only as required for assembly purposes
ASCO takes great care to minimize contamination during manufacturing. That's why ASCO's miniature valves are assembled in ISO Class 8 equivalent cleanrooms. With three regional manufacturing facilities you can be assured that you will get the right product, when you need it.
ISO Class 8 Cleanroom Manufacturing
3
Corporate Locations
With nearly 5,000 employees worldwide and manufacturing and sales offices in over 43 countries, ASCO is ready to handle your most demanding design challenges. Whether you need a minor modification of a catalog product or a complete flow control system, our trained sales and engineering staff are ready to assist.
Global Infrastructure
4
Analytical technologies involve an apparatus used to analyze a chemical species or a patient sample. Typically, analytical applications require resistance to aggressive fluids, a low internal volume, and an easy-to-flush internal cavity to minimize cross- contamination. Power consumption of ASCO's miniature product line is also minimized to reduce heat transfer to expensive reagents and biological fluids.
Analytical Technologies
• DNA Sequencing • Surgical Fluid Management • Cytometry • Water Analysis
Highest precision and functionality – especially suitable for aggressive fluids
ASCO's miniature valve product line is ideally suited for use in the following analytical applications:
5
Medical technologies include apparatus and processes in which the valve may come into direct contact with a fluid that is introduced into, or taken from, patients. These applications require valve products constructed of inert materials, have low internal volumes to reduce cross-contamination, and low power consumption for use in portable devices.
Medical Technologies
• Dentistry • Hospital Equipment • Ventilators • Endoscopy
Focus on safety for patients
ASCO's miniature valve product line is ideally suited for use in the following medical applications:
6 Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.
Laserstrahl
Laser beam
Sorted cells
Sample delivery
The valves are used for the delivery of patient sample solution, marker and fluid sheath in the analytical process.
Cytometry
The valves are used to aspirate and dispense liquids to and from pipettes. The aim is to control equal volumes at regular intervals over a number of individual pipettes.
Pipette Dispensing
The valves control the supply and dosing of blood in the analytical process.
Hematology
The valve is used for the precise proportional control of flow in response to a signal from a sensor.
Mass Flow Controllers
The battery- operated valves open and close the channel feeding the gases to the analyzer.
The valves adjust and control the upstream pressure of the carrier gas, or are used to select and route the various solvent/ sample mixtures.
Emission AnalysisChromatography
The valves are used for supplying and dosing samples in the process.
The valves are used as pilot valves to control, via diaphragms, the handling of fluids in a DNA sequencer or in oligonucleotide synthesis.
HPLCDNA Sequencing
7Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com.
APPLICATION EXAMPLES Medical Technologies
The valve manifold regulates and controls the supply of water and air to the instruments of a dental treatment chair.
The valve module controls the CO2 supply to enlarge the operating area in minimally- invasive surgery.
Dental Technology
Air Miniature solenoid valves allow control of the inflation and deflation of the cuff for blood pressure measurement.
Blood Pressure Monitoring
Blood is pumped through an artificial heart by alternately applying pressure or vacuum.
A 3/2 valve delivers the drug to the injector pump and from the injector pump to the patient. It operates in the vacuum range (suction phase) and overpressure range (dosing phase).
Artificial HeartAnesthesia Delivery
The pinch valve controls the supply of dialysate fluid from the reservoir to the patient.
The valve module regulates and controls the supply of steam and/or disinfectant fluid for the sterilization process.
Clinical Sterilizers
The valve module regulates the volume and/or mixture of oxygen and air supplied to the patient.
Respirators
Endoscopy
Peritoneal Dialysis
RAPID ENGINEERED SOLUTIONS Analytical and Medical Technologies
Application: Oxygen Therapy Custom RB Series general service valves mounted on a composite manifold. The valves operate alternately to fill individual sieve-bed cartridges that are designed to absorb nitrogen from ambient air. The result is purified oxygen that is then delivered to the patient.
Application: Chemical Sterilizer Custom 385 Series liquid isolation valves mounted on an acrylic manifold with a custom wire harness and ASCO Numatics cylinder. The module delivers a sterilizing agent to a chamber containing contaminated medical devices.
• Complete solution provider for value-added miniature valve assemblies and modules • Technical sales expertise for co-developing solutions with OEMs • Dedicated team of product development engineers and application engineers • Rapid turnaround times from design to 3D modeling and prototyping • Global manufacturing, sales, and technical support • ISO Class 8 clean room manufacturing to minimize contamination • Long lifecycle products tested to over 100 million cycles • Very low internal valve volumes to minimize cross-contamination and improve flushability • Optional power saving functions for improved energy efficiency
The Analytical and Medical marketplace is driven mainly by customization of standard products in order to meet varying customer instrumentation demands. The ability to quickly customize a valve product, or provide a solution, is increasingly demanded by OEM engineers. Instrumentation development times are being reduced, and as a result instrument complexity is being consolidated into modular components to accelerate speed-to-market. ASCO’s Rapid Engineered Solutions are focused on miniature valve products that fulfill the needs of the analytical and medical instrument markets. Backed by the group's prototype labs, ASCO valves and assemblies designed for quick and efficient manufacturing, and local technical support provided by product specialists trained in analytical and medical applications. ASCO’s capabilities include:
The Rapid Engineered Solutions Program is ideal for OEMs designing clinical diagnostic, bioinstrumentation, chromatography, hospital and dental equipment, industrial analyzers, patient monitoring, and surgical and oxygen therapy applications.
Application: Dental Chair The special module is used in dental chairs to handle, control and regulate liquids and gases (e.g turbine of the driller, water). The manifold is modular and can be adapted to different functions. Injection molded body components offer the best quality.
RAPID ENGINEERED SOLUTIONS Analytical and Medical Technologies
Application: Ventilator This custom manifold for ventilator applications includes 188 Series general service valves, pressure relief valves, thermal sensors as well as custom fittings. The manifold controls the air/oxygen to the patient.
Application: Hemodialysis Custom high flow 188 Series general service valves mounted on a composite manifold including PCB, pressure sensors & custom tubing. The leakage rate requirements as well as the requirements of the process require a highly engineered and reliable solution.
Application: Air Therapeutic Support Surface Custom high flow general service valves mounted on a composite manifold with custom wire harnesses. The custom assembly operates several individual air bladders within the medical support surface to aid in patient comfort.
Technical characteristics Fluid Gases and liquids
Pressure range 0 to 2.5 bar (0 to 36 psi)
Function NC
Construction Poppet valve
Seals FFKM, FKM, VMQ, EPDM
Overall width 8mm (0.31in), 17mm (0.67in), 27mm (1.06in), 32mm (1.26in)
Features Compact design
Low internal volume (< 10μl)
Good flushability
High-quality materials
Fluid Isolation 2/2 Solenoid Valves with Diaphragm Mechanism 282 Series solenoid valves with diaphragm mechanism are characterized by their compact size, long service life and very low internal volume. They are ideal for controlling aggressive fluids. The valve bodies are made of stainless steel or synthetic material (PEEK/PVDF/PP). Fluid isolation is ensured by the incorporated diaphragm made of VMQ (silicone), FKM (fluoroelastomer), FFKM (perfluoroelastomer) or EPDM (ethylene-propylene).
FLUID ISOLATION VALVES
282 Series
055 Series
Pressure range -0.9 to 3 bar (-13 to 43.5 psi)
Function NC, NO and U
Connection Flange, hose connection, 1/4 – 28 UNF, 5/16 – 24 UNF
Overall width 067 Series: 10mm (0.39in), 385 Series: 16mm (0.63in)
Low heat transfer into the fluid
Very low internal volume (< 13μl)
Good self-draining capability
Various electrical connection options
Fluid Isolation 2/2 and 3/2 Solenoid Valves with Rocker Mechanism 067 and 385 Series fluid isolation solenoid valves with rocker mechanism are characterized by their compact size and hermetic separation between the control mechanism and the fluid. The solenoid valves are ideal for controlling aggressive fluids or applications requiring high fluid purity.
More information on 067 Series pg. 26
FFKM/FKM/EPDM diaphragm PEEK valve body
Special flapper mechanism
Pressure range -0.9 to 10 bar (-13 to 145 psi)
Connection G1/8, flange, 1/4 – 28 UNF, hose connection
Valve body PEEK
Features Low power consumption (up to 1.5 Watt)
Low heat transfer into the fluid
Wide pressure range
Low internal volume
More information on 068 Series Proportional pg. 38
More information on 068 Series (22mm) pg. 34
More information on 068 Series (16mm) pg. 30
Fluid Isolation 2/2 and 3/2 Solenoid Valves with Flapper Mechanism 068 Series fluid isolation solenoid valves are suitable for use with neutral or aggressive liquids and gases. The isolation design and use of high-quality materials (PEEK and FFKM/FKM/EPDM) prevents fluid contamination. The special flapper mechanism and large orifice sizes (0.8 to 4mm) allow high pressures (up to 10 bar). A power- save connector lowers the holding power down to 1.5 Watts, thus minimizing the heat transfer into the fluid.
Series 283 Threaded Connection
Pressure range 0 to 10 bar (0 to 145 psi)
Connection G1/4 – G1/2, Smooth spigots 8 – 11mm (0.315 – 0.433in) O.D.
Features Large flow
Wide pressure range
Low internal volume
Various electrical connection options
Series 283 Spigot Connections
More information on 283 Series (Spigot) pg. 46
More information on 283 Series (Threaded) pg. 48
Fluid Isolation 2/2 Solenoid Valves with Lever Mechanism 283 and 383 Series fluid isolation valves with lever mechanism can be used at high differential pressures and large flow volumes. Since the offset control mechanism provides optimal heat dissipation in the electromagnetic component, the valves are suitable for use at high ambient temperatures.
FFKM/FKM disc
PTFE bellows seal
Wide pressure range
Function NC
Seals PTFE (bellows), FFKM/FKM (disc)
Overall width 22mm and 45mm (0.87in and 1.77in)
Fluid Isolation 2/2 and 3/2 Solenoid Valves with Bellows Seal System 296 and 396 Series fluid isolation solenoid valves with bellows seals are characterized by their high functional reliability under harsh conditions and their long service life. PEEK and stainless steel bodies, PTFE bellows and FFKM seals allow the valves to be used with extremely corrosive fluids. The valves are designed for high pressure and flow rates.
Pinch clamp
Fastening clip
Bi-directional flow
Pressure range 0 to 0.8 bar (0 to 11.6 psi)
Connection Tubes 1.65mm (0.065in) to 9.5mm (0.37in) O.D.
Construction Tube clamp
Overall width 17mm (0.67in), 19mm (0.75in), 32mm (1.26in), 42mm (1.65in)
Fluid Isolation 2/2 and 3/2 Solenoid Valves with Pinch Mechanism 284 and 384 Series fluid isolation pinch valves are characterized by their uninterrupted flow path and the long service life of their tubes. This is achieved using the pinch mechanism which provides a smooth, constant pressure on the soft tubing. Any risk of contamination is reliably avoided by changing the tubes.
Manual operator
Wide range of nominal diameters 0.6 – 2mm (0.024 – 0.079in)
Other bodies and seals on request
Suitable for vacuum applications
Optional operation with power-save connector
Technical characteristics Fluid Inert gases
Function NC and NO
Connection Flange, threaded connection, 1/4 – 28 UNF, hose connection, screw-in type M5
Seals NBR, FKM, TPE
Overall width 188 Series: 10mm (0.39in), S Series: 19mm (0.75in), RB Series: 15mm (0.59in) and 19mm (0.75in), 411 Series: 19mm (0.75in)
More information on S Series pg. 100
188 Series, High Flow
More information on RB Series pg. 95
411 Series
RB Series
S Series
2/2 and 3/2 Miniature Solenoid Valves 188, S, RB and 411 Series micro solenoid valves are used mainly as pilot valves or for the handling of inert gases. These series are suitable for applications in almost all areas of analytical and medical technology. Their compact size and easy installation allows several valves to be mounted on a subbase or custom valve module.
GENERAL SERVICE VALVES
Stainless steel body
Short response times (< 10 ms)
Low power consumption (2 Watt)
Wide range of nominal diameters 0.6 – 2mm (0.024 – 0.079in)
Compact design
Function NC and NO
Connection M5 or flange
Seals FKM
065 Series Threaded and Manifold
Mount
2/2 and 3/2 Solenoid Valves with Flat Spring Technology 065 Series flat spring valves are used mainly in medical and analytical apparatus, gas analyzers and leak detectors. The valves are characterized by their long service life and extremely short response times. High-quality stainless steel and sealing materials make the valves suitable for use with a wide range of gases.
GENERAL SERVICE VALVES
A mechanical deformation occurs under an electrical charge (this can also occur vice-versa). The multi-layer piezoelectric element is the essential part of a Piezotronic valve. It consists of elementary dipoles which are polarized during manufacture. The length of the material changes as soon as the piezo ceramics are exposed to an electrical field.
Piezoelectric effect
Large electrical control range
Pad mounting to industrial standard
No overheating
EExia option
Technical characteristics Fluid: Air and gases
Pressure range: 0 to 8 bar (0 to 116 psi)
Function: NC and NO
Flow: Kv 0.007/Cv 0.008
Construction: Poppet valve
Valve body: PPS
Overall width: 15mm (0.59in)
Piezotronic, 630 Series
2-way Proportional Valve for Flow Control Piezotronic 630 Series 2/2 piezo valves for flow control are a high-tech solution designed in particular for applications requiring extremely low power consumption. They are suitable for use in battery-operated equipment or in potentially explosive areas.
PIEZOTRONIC VALVES
Valve seat
Piezo element
PPS body
Low power consumption
Pressure range Vacuum to 16 bar (232 psi)
Function NC
Seals NBR, FKM, CR, EPDM, PTFE
More information on ControlD pg. 122
Posiflow, 202 Series
2-way Proportional Valve for Flow Control Posiflow 202 Series Posiflow proportional valves can be used in practically all applications in which the flow of a liquid or gas needs to be proportionally controlled. Since a single proportional valve can replace two or three conventional valves connected in parallel (NC or NO) to obtain low, medium or high flow rates, it provides a cost-effective and space-saving solution.
PROPORTIONAL VALVES
More information on Posiflow 202 Series pg. 114
More information on Electronic Control Unit pg. 124
The stand-alone control device CONTROLD is used for open-loop, closed-loop or double-loop (cascaded) process control. It is designed to control proportional valves by regulating the current in the valve's solenoid coil. The control parameters can be set by PC software.
The electronic control unit converts a standard signal (e.g. 0 to 10 V) into an output current (0 to 1.0 A). The output current, which is pulse-width modulated, provides low- hysteresis control, irrespective of temperature influences. The current values are set with a potentiometer.
Electronic Control Unit or ControlD
CONTROLDELECTRONIC CONTROL UNIT
Frictionless suspension of the core between 2 flat springs
Stainless steel valve seat
FKM disc
The electronic control unit converts a standard signal (e.g. 0 to 10 V) into an output current (0 to 1.0 A). The output current, which is pulse-width modulated, provides low- hysteresis control, irrespective of temperature influences. The current values are set with a potentiometer.
Electronic Control Unit or ControlD
CONTROLDELECTRONIC CONTROL UNIT
Preciflow, 202 Series
Stepless flow characteristic
Pressure range Vacuum to 10 bar (145 psi)
Function NC
Seals FKM, FFKM
More information on Electronic Control Unit pg. 124
More information on Preciflow 202 Series pg. 104
More information on ControlD pg. 122
More information on Preciflow (19mm) 202 Series pg. 108
More information on Preciflow (15mm) 202 Series pg. 106
2-way Proportional Valve for Flow Control Preciflow 202 Series 2/2 proportional valves are ideal for use in applications in many areas of analytical and medical technologies. Frictionless suspension of the core reduces hysteresis and provides stepless control in the lower and upper ranges. Typical applications include respirators or mass flow controllers.
PROPORTIONAL VALVES
Flat spring
FKM disc
FKM diaphragm
ControlD
CONTROLD
Direct operated
Pressure range 0 to 7 bar (101 psi)
Function NC
More information on Preciflow IPC 202 Series pg. 110
2-way Proportional Valve for Flow Control Preciflow IPC 202 Series Preciflow IPC valves are inlet pressure compensated flow control valves. Inlet pressure compensation allows high pressures and flows at low solenoid coil power consumption. Typical applications for these valves are in medical (e.g. respirators) and analytical apparatus (e.g. mass flow controllers).
PROPORTIONAL VALVES
NOTES
Information subject to change without notice. For ordering information or regarding your local sales office visit www.asco.com. 23
SERIES
055
Coil Insulation Class F
Connector 22 AWG or 24 AWG Lead wires, 457mm (18in) long, PTFE coated
Standard Voltages 12 VDC, 24 VDC
Power Consumption 1.0 to 7.2 Watts
General Valve Information* Body PTFE
Poppet PTFE
Diaphragm PTFE
Response Time < 20ms
Internal Volume As low as 18 μl * Ensure that the compatibility of the fluids in contact with the materials is verified
Fluids* Temperature Range Seal Materials*
Aggressive liquids 0 C to 25 C (32 F to 77 F) PTFE * Ensure that the compatibility of the fluids in contact with the materials is verified
• PTFE isolation valves are designed for use with highly aggressive liquids
• The PTFE body and diaphragm isolates the internal solenoid components from the media resulting in a virtually impervious valve
• Excellent self-draining capability and easy-to-flush low-volume internal cavity
• Compact architecture make them ideal for analytical bench-top instrumentation
• Available in 2-Way normally closed, 2-Way normally open, and 3-Way universal; comes with #10-32, 1/4-28, or 1/8 NPSC in-line porting for exceptional versatility
• Meets all relevant CE directives • Typical applications include:
– Chromatography – Solvent Selection/Diversion – Sample Preparation – DNA Sequencing
3/2 Universal
SERIES
055
Electrical Connection Type L0 = Leaded coil: lead length 457mm (18in)
Options T00 = PTFE
Voltage F1 = 24 VDC Class F F3 = 12 VDC Class F
Orifice Size/Connection Type 01 = 0.040 x 10-32 02 = 0.062 x 1/4-28 03 = 0.093 x 1/4-28 04 = 0.156 x 1/8 NPSC
Operation Mode 1 = Normally Closed 2 = Normally Open 3 = 3-Way
Catalog Number
Specifications
Connection Orifice Size Flow Coefficient Pressure Differential bar (psi) Power Coil
(W) Catalog Numbermin. max. mm (inches) Kv (m3/h) Cv gas / liquids
2/2 NC - Normally Closed #10-32 1.02 (0.040) 0.010 0.012 -0.9 (-13) 2.07 (30) 1 0055A101L0T00xx 1/4-28 1.57 (0.062) 0.023 0.027 -0.9 (-13) 2.07 (30) 1.5 0055A102L0T00xx 1/4-28 2.36 (0.093) 0.050 0.058 -0.9 (-13) 2.07 (30) 4.2 0055A103L0T00xx
1/8 NPSC 3.96 (0.156) 0.186 0.215 -0.9 (-13) 2.07 (30) 7.2 0055A104L0T00xx 2/2 NO - Normally Open
#10-32 1.02 (0.040) 0.010 0.012 -0.9 (-13) 2.07 (30) 1 0055A201L0T00xx 1/4-28 1.57 (0.062) 0.025 0.029 -0.9 (-13) 2.07 (30) 1.5 0055A202L0T00xx 1/4-28 2.36 (0.093) 0.050 0.058 -0.9 (-13) 2.07 (30) 4.2 0055A203L0T00xx
1/8 NPSC 3.96 (0.156) 0.188 0.217 -0.9 (-13) 2.07 (30) 7.2 0055A204L0T00xx 3/2 U - Universal
#10-32 1.02 (0.040) 0.009 0.011 -0.9 (-13) 2.07 (30) 1 0055A301L0T00xx 1/4-28 1.57 (0.062) 0.021 0.024 -0.9 (-13) 2.07 (30) 1.5 0055A302L0T00xx 1/4-28 2.36 (0.093) 0.033 0.039 -0.9 (-13) 2.07 (30) 4.2 0055A303L0T00xx
1/8 NPSC 3.96 (0.156) 0.167 0.193 -0.9 (-13) 2.07 (30) 7.2 0055A304L0T00xx
SERIES
055
Ø
F
D
F
B
C
D
A
Ø
F
C
D
B
A
Ø
F
B
C
D
A
Ø
Configuration Type Catalog Number Ø A B C D E F
2-Way NC
01 0055A101L0T00xx 19.05 (0.750) 29.34 (1.155) 12.70 (0.500) 9.220 (0.363) 12.70 (0.500) - #2-56 02 0055A102L0T00xx 25.40 (1.000) 37.78 (1.488) 12.34 (0.486) 11.43 (0.450) 17.40 (0.687) -
#4-4004 0055A103L0T00xx 31.75 (1.250) 47.32 (1.863) 22.45 (0.884) 12.70 (0.500) 22.45 (0.884) 38.10 (1.500) 04 0055A104L0T00xx 38.10 (1.500) 53.04 (2.088) 28.57 (1.125) 14.27 (0.562) 28.57 (1.125) 44.45 (1.750)
2-Way NO
01 0055A201L0T00xx 19.05 (0.750) 29.54 (1.163) 12.70 (0.500) 9.220 (0.363) 12.70 (0.500) - #2-56 02 0055A202L0T00xx 25.40 (1.000) 37.91 (1.493) 12.34 (0.486) 11.43 (0.450) 17.40 (0.687) -
#4-4004 0055A203L0T00xx 31.75 (1.250) 46.06 (1.814) 22.45 (0.884) 12.70 (0.500) 22.45 (0.884) 38.10 (1.500) 04 0055A204L0T00xx 38.10 (1.500) 51.78 (2.039) 28.57 (1.125) 14.27 (0.562) 28.57 (1.125) 44.45 (1.750)
3-Way
01 0055A301L0T00xx 19.05 (0.750) 29.49 (1.161) 12.70 (0.500) 9.220 (0.363) 12.70 (0.500) - #2-56 03 0055A302L0T00xx 25.40 (1.000) 37.88 (1.492) 17.40 (0.687) 11.43 (0.450) 17.40 (0.687) -
#4-4005 0055A303L0T00xx 31.75 (1.250) 46.06 (1.814) 22.45 (0.884) 12.70 (0.500) 22.45 (0.884) 38.10 (1.500) 05 0055A304L0T00xx 38.10 (1.500) 51.75 (2.038) 28.57 (1.125) 14.27 (0.562) 28.57 (1.125) 44.45 (1.750)
Type 05Type 04Type 03Type 02Type 01
Dimensional Drawings Dimensions: mm (inches)
SERIES
067
Function 2/2 NO
Specific 2.5/1.0* 10 to 50 (50 to 122) IP40
Connector with two 0.5mm² lead wires + built-in LED and electrical protection or
lead wires, 0.5m (19.7in) long * With power-save electronics 1 The coil used for orifice size 1.35mm (0.053in) is longer by 12.5mm (0.49in) than that used for the
other orifice sizes, see drawings on following pages
Electrical Characteristics
Electrical Safety EN 60335
Standard Voltages* 12 VDC, 24 VDC (-5%/+10%)
* Other voltages on request
General Valve Information Body PEEK Seals FFKM (FKM/EPDM) Diaphragm FFKM (FKM/EPDM) Others Stainless Steel Response Time < 10ms Internal Volume 10μl Max. Viscosity 20 cSt (mm2/s)
Liquids or Gases 10 °C to 40 °C (50 °F to 104 °F) FKM/FFKM
5 °C to 40 °C (41 °F to 104 °F) EPDM
* Ensure that the compatibility of the fluids in contact with the materials is verified.
• Rocker isolation valves are designed for use with neutral or highly aggressive liquids in analytical instrumentation
• Special rocker mechanism, combined with a separating diaphragm, prevents heat transfer to the fluid and eliminates the sticking effect of the valve seat
• Hermetic separation of control mechanism prevents particulate contamination caused by friction of moving parts, assuring maximum purity of liquid samples
• Excellent self-draining capability and easy-to-flush low-volume internal cavity make these valves ideal in application where cross- contamination must be minimized
• “Hit and Hold” feature utilizes an integrated power-save switch that reduces analytical instrument power consumption
• Meets all relevant CE directives, and is RoHS compliant • Typical applications include:
– Pipette Dispensing – In-vitro Diagnostics – DNA Sequencing – Surgical Fluid Management
3/2 Universal
SERIES
067
Specifications
M
mm (inches) Kv (m3/h) Cv gases liquids 2/2 NC - Normally Closed
Long Flange1
(-13) 3
(43.5) 3
1 SC S067A 021
V E 2 SC S067A 022 3 SC S067A 023 4 SC S067A 024 5 L S067A 025
0.8 (0.031) 0.010 0.012 -0.9
(-13) 2
(29.0) 2
1 SC S067A 026
1.0 (0.040) 0.017 0.020 -0.9
(-13) 1.5
(21.8) 1.5
1 SC S067A 031
1.35 (0.053) 0.026 0.030 -0.9
(-13) 1.0
(14.5) 1.0
1 SC S067A 036
2/2 NO - Normally Open
(-13) 3
(43.5) 3
1 SC S067A 061
0.8 (0.031) 0.010 0.012 -0.9
(-13) 2
(29.0) 2
1 SC S067A 066
1.0 (0.040) 0.017 0.020 -0.9
(-13) 1.5
(21.8) 1.5
1 SC S067A 071
1.35 (0.053) 0.026 0.030 -0.9
(-13) 1.0
(14.5) 1.0
1 SC S067A 076
3/2 U-Universal
Long Flange1
(-13) 3
(43.5) 3
1 SC S067A 101
0.8 (0.031) 0.010 0.012 -0.9
(-13) 2
(29.0) 2
1 SC S067A 106
1.0 (0.040) 0.017 0.020 -0.9
(-13) 1.5
(21.8) 1.5
1 SC S067A 111
1.35 (0.053) 0.026 0.030 -0.9
(-13) 1.0
(14.5) 1.0
1 SC S067A 116
* Types 1 to 5 with power-save electronics, LED and electrical protection, mm (inches)
1 2 hexagon socket head cap mounting screws M3x6mm (0.24in), stainless steel, ISO4762 supplied 2 To order FFKM seals, leave the corresponding designation in the catalog number "blank"
1 = width: 5.08 (0.2) 2 = width: 5.08 (0.2) 3 = width: 2.54 (0.1)
4 = width: 2.54 (0.1) 5 = Flying Leads, 0.5 (19.7) long (see drawings on following page)
SERIES
067
1 The coil used for orifice size 1.35mm (0.053in) is longer by 12.5mm (0.492in) than that used for the other orifice sizes NOTE: Connectors must be ordered separately, please specify the quantity and Catalog numbers required: Pin spacing 5.08 (0.20) 0.5m (19.7in) long Catalog number: 88118801 1.5m (59in) long Catalog number: 88118802 3m (118in) long Catalog number: 88118803
Pin spacing 2.54 (0.10) 0.5m (19.7in) long Catalog number: 88118806 1.5m (59in) long Catalog number: 88118807 3m (118in) long Catalog number: 88118808
min. 37.5 (1.48)
16.5 (0.649)21 (0.315)
12.5 (0.492)17 (0.670)
Orifice size 1.35 (0.053)
SERIES
067
UNF thread - Catalog number 36100040
Bottom push-in hose connection - Catalog number 36100042
UNF thread - Catalog number 36100038
Dimensional Drawings Single Subbases PEEK
Dimensions: mm (inches)
Installation • The solenoid valves can be mounted in any position without affecting operation
Options • Subbases available on request • Manual operator (impulse-type)
56.4 (2.22)
18 .3
(0 .7
SERIES
068
VA VA W W ºC (ºF)
S0 - - - 4 5 to 50
(41 to 122) 01
L0 - - - 02 * Other voltages on request 1 Refer to the drawings on following pages 2 0.5m (19.7in) lead wires
Electrical Characteristics Coil Insulation Class F
Connector Spade terminals or Lead wires2
Connector Specification
Electrical Safety IEC 335
Electrical Enclosure Protection
Molded IP40 spade terminals (EN 60529) Molded IP66 lead wires (EN 60529)
Standard Voltages* 12 VDC, 24 VDC (-5%/+10%)
General Valve Information Body PEEK Seals FFKM (FKM/EPDM) Diaphragm FFKM (FKM/EPDM) Others Stainless Steel Response Time < 20ms Internal Volume 75µl
Max. Viscosity 20 cSt (mm2/s)
Liquids or Gases1 5 °C to 50 °C (41 °F to 122 °F)
FFKM
FKM
EPDM 1 Filtration: 50µm * Ensure that the compatibility of the fluids in contact with the materials is verified
• Flapper isolation valves are designed for use with neutral or highly aggressive liquids in analytical and medical systems
• Special Flapper mechanism results in no pumping or sticking effects • Reduced heat transfer between control mechanism and fluid
make them ideal for use with heat-sensitive reagents and biological samples
– In-vitro Diagnostics – Hematology – DNA Sequencing – Industrial Liquid Analyzers
FLAPPER SOLENOID FLUID ISOLATION VALVES
16mm
SERIES
068
Installation • The solenoid valves can be mounted in any position without affecting operation • Pad-mounting solenoid valve supplied with seal
Options • Subbases available on request
Ordering Example: R068A216S0E00F1 = 2-way NC (normally closed), orifice size 1.6mm (0.063in), pad-mounting body width 16mm (0.63in), with spade terminals without connector, EPDM seals, 24 VDC
Voltage F3 = 12 VDC F1 = 24 VDC
Seal Materials V = FKM 1 = FFKM E = EPDM
Connector S0 = spade terminals without connector L0 = with lead wires 500mm (19.7in)
Catalog Number
Specifications
Coil (W)
Catalog Number
min. max. Body
PEEKmm (inches) Kv (m3/h) Cv gases or liquids 2/2 NC - Normally Closed
Pad Mounting1 0.8 (0.031) 0.021 0.024 -0.9 (-13) 8 (116) 4 R068A212xxx00xx 1.2 (0.047) 0.036 0.042 -0.9 (-13) 4 (58) 4 R068A214xxx00xx 1.6 (0.063) 0.042 0.046 -0.9 (-13) 2 (29) 4 R068A216xxx00xx
1/4-28 UNF 0.8 (0.031) 0.021 0.024 -0.9 (-13) 8 (116) 4 0068A212xxx00xx 1.2 (0.047) 0.036 0.042 -0.9 (-13) 4 (58) 4 0068A214xxx00xx 1.6 (0.063) 0.042 0.046 -0.9 (-13) 2 (29) 4 0068A216xxx00xx
Push-in Hose Connection
0.8 (0.031) 0.021 0.024 -0.9 (-13) 8 (116) 4 6068A212xxx00xx 1.2 (0.047) 0.036 0.042 -0.9 (-13) 4 (58) 4 6068A214xxx00xx 1.6 (0.063) 0.042 0.046 -0.9 (-13) 2 (29) 4 6068A216xxx00xx
3/2 U-Universal
1 2 hexagon socket head cap mounting screws M2.5, stainless steel, supplied
SERIES
068
4.5 (0.18)
4.5 (0.18)
Type 02 Solenoid with lead wires (L0) 24 AWG, lead wires: 500mm (19.7in) long IP66
16 (0.63)27 (1.06)
Type 01
SERIES
068
1/4 - 28 UNF Version Version with Push-in Hose Connection
Surface at to within 0.05 (0.002) Surface roughness Rz3.2 or less
2x M2.5x0.45 min. 5
SERIES
068
VA VA W W ºC (ºF) 12 VDC 24 VDC
S1 - - - 9.6 10 to 50
(50 to 122) 400129-005 -
01 10 - 400129-007
L0 - - - 10 10 to 50 (50 to 122) 400119-011D 400119-008D 02
1 Refer to the drawings on following pages
Connector Spade plug (Ø6 to 8mm) or Lead Wires1
Connector Specification DIN 43650, 11mm (0.43in), industry standard B
Electrical Safety IEC 335 (lead wires: EN 60730)
Electrical Enclosure Protection Molded IP65 (EN 60529)
Standard Voltages* 12 VDC, 24 VDC (-5%/+10%) * Other voltages on request 1 0.45m (17.7in) lead wires
General Valve Information Body PEEK Seals FFKM (FKM/EPDM) Diaphragm FFKM (FKM/EPDM) Others Stainless Steel Response Time < 10ms Internal Volume 0.48ml Max. Viscosity 20 cSt (mm2/s)
Liquids or Gases1 5 °C to 50 °C (41 °F to 122 °F)
FFKM
FKM
EPDM 1 Filtration: 50µm * Ensure that the compatibility of the fluids in contact with the materials is verified
• Flapper isolation valves are designed for use with neutral or highly aggressive liquids in analytical and medical systems
• Special Flapper mechanism results in no pumping or sticking effects • Reduced heat transfer between control mechanism and fluid make
them ideal for use with heat-sensitive reagents and biological samples • Hermetic separation of control mechanism prevents particulate
contamination caused by friction of moving parts, assuring maximum purity of liquid samples
– In-vitro Diagnostics – Hematology – DNA Sequencing – Industrial Liquid Analyzers
FLAPPER SOLENOID FLUID ISOLATION VALVES
22mm
SERIES
068
Ordering Example: R068A317S1E00F1 = 2-way NC (normally closed), orifice size 2mm (0.079in), pad-mounting body width 22mm (0.867in), spade terminals with connector, EPDM seals, 24 VDC
Connector S1 = spade terminals with connector L0 = with lead wires 457mm (18in)
Catalog Number
Specifications
Coil Catalog Number
min. max. Body
PEEKmm (inches) Kv (m3/h) Cv gases or liquids W 2/2 NC - Normally Closed
G1/8 2 (0.079) 0.10 0.12 -0.9 (-13) 10 (145) 10 G068A317xxx00xx 3 (0.118) 0.16 0.18 -0.9 (-13) 3 (43) 10 G068A318xxx00xx 4 (0.157) 0.30 0.35 -0.9 (-13) 1.5 (22) 10 G068A319xxx00xx
Pad Mounting1 2 (0.079) 0.10 0.12 -0.9 (-13) 10 (145) 10 R068A317xxx00xx 3 (0.118) 0.16 0.18 -0.9 (-13) 3 (43) 10 R068A318xxx00xx 4 (0.157) 0.30 0.35 -0.9 (-13) 1.5 (22) 10 R068A319xxx00xx
G1/8 2 (0.079) 0.10 0.12 -0.9 (-13) 5 (72.5) 10 G068A327xxx00xx 3 (0.118) 0.16 0.18 -0.9 (-13) 2 (29) 10 G068A328xxx00xx 4 (0.157) 0.30 0.35 -0.9 (-13) 1 (14.5) 10 G068A329xxx00xx
Pad Mounting1 2 (0.079) 0.10 0.12 -0.9 (-13) 5 (72.5) 10 R068A327xxx00xx 3 (0.118) 0.16 0.18 -0.9 (-13) 2 (29) 10 R068A328xxx00xx 4 (0.157) 0.30 0.35 -0.9 (-13) 1 (14.5) 10 R068A329xxx00xx
3/2 U-Universal
G1/8 2 (0.079) 0.10 0.12 -0.9 (-13) 5 (72.5) 10 G068A337xxx00xx 3 (0.118) 0.16 0.18 -0.9 (-13) 2 (29) 10 G068A338xxx00xx 4 (0.157) 0.30 0.35 -0.9 (-13) 1 (14.5) 10 G068A339xxx00xx
Pad Mounting1 2 (0.079) 0.10 0.12 -0.9 (-13) 5 (72.5) 10 R068A337xxx00xx 3 (0.118) 0.16 0.18 -0.9 (-13) 2 (29) 10 R068A338xxx00xx 4 (0.157) 0.30 0.35 -0.9 (-13) 1 (14.5) 10 R068A339xxx00xx
1 4 hexagon socket head cap mounting screws M3 x 8mm (0.31in), stainless steel, ISO 4762 supplied
Installation • The solenoid valves can be mounted in any position without
affecting operation • Pad-mounting solenoid valve supplied with seal • Pipe connections 1/8 have standard thread according to
ISO 228/1
Options • Subbases available on request • Power-save connector (2.5 W after 140ms of operation),
24 VDC version: 88100934, 12 VDC version: 833-150063 • Impulse manual operator
SERIES
068
Type 02 Solenoid with lead wires (L0) IEC 335, lead wires: 0.45m (17.7in) long IP40
Solenoid with spade plug connector (S1) Epoxy molded IEC 335/DIN 43650 IP65
Type 01
1 2 wires, length 0.45m (17.7in)
2 4 mounting holes, max. depth 7mm (0.27in), for self-tapping screw (type EJOT PT, K30)
3 Manual operator location
4 4 mounting holes Ø3.2mm (0.126in) (4 hexagon socket head cap mounting screws M3 x 8mm (0.315in), stainless steel, ISO 4762 supplied)
21 3
21 3
21 3
Type Prefix Option
Catalog Number A B C D E F G H J K X weight
kg1
(1.99) 27
(1.06) 0.120
1 Type 01: includes coil(s) and connector(s); Type 02: with 0.45m (17.7in) lead wires
SERIES
068
1 2 3
1 4 mounting holes Ø3.2mm (0.126in) 2 Max. diameter 4.5mm (0.177in) 3x
21 3
21 3
21 3
2/2 NC
2/2 NO
3/2 U
SERIES
068
Pressure Differential bar (psi) Power Coil (W)
Catalog Number
G1/8 2 (0.079) 0.069 0.080 0 4.5 (65) 9 G068A317xxx10xx
3 (0.118) 0.123 0.142 0 2.0 (29) 9 G068A318xxx10xx
Pad Mounting1 2 (0.079) 0.069 0.080 0 4.5 (65) 9 R068A317xxx10xx
3 (0.118) 0.123 0.142 0 2.0 (29) 9 R068A318xxx10xx 1 4 hexagon socket screws M3 x 8mm (0.315), stainless steel, ISO 4762 (supplied)
Voltage Max.
Operating Current
12 0
750 9
Connector Lead Wires 24 AWG; L = 500mm (19.685in)
Standard Voltages 12 VDC, 24 VDC (-5%/+10%)
Voltage Regulation 0-12 VDC, 0-24 VDC Pulse-width Modulation (> 1000Hz)
Flow Regulation Characteristics Hysteresis typ. 20%; Repeatability typ. 5%; Sensitivity typ.1%
General Valve Information Body PEEK Seals FKM/FFKM/EPDM Diaphragm FKM/FFKM/EPDM Others Stainless Steel Response Time < 20ms Internal Volume 0.48ml
Max. Viscosity 20 cSt (mm2/s)
Liquids or Gases1 5 °C to 50 °C (41 °F to 122 °F) FKM/FFKM/EPDM
1 Filtration: 50µm * Ensure that the compatibility of the fluids in contact with the materials is verified
• Flapper proportional valves are designed to proportionally control the flow of neutral and aggressive liquids and gases by varying the electrical input signal to the coil
• Special Flapper mechanism results in no pumping or sticking effects • Reduced heat transfer between control mechanism and fluid make
them ideal for use with heat-sensitive reagents and biological samples
• Hysteresis (< 20%), excellent repeatability (< 5%), and high sensitivity (< 1%) make these valves ideal for high precision flow control of liquids
• Excellent self-draining capability and easy-to-flush internal cavity • Valves do not require a minimum operating pressure • Meets all relevant CE directives, and is RoHS compliant • Typical Applications include:
– Chromatography – DNA Sequencing – In-vitro Diagnostics – Industrial Liquid Analyzers
U I
SERIES
068
Connector S1 = spade terminals with connector
Catalog Number (see Specifications table)
G068A317 xx x 10 xx How to Order
Ordering Example: R068A317S1E10F1 = 2-way NC (normally closed), orifice size 2mm (0.079in), pad-mounting body, spade terminals with connector, EPDM seals, 24 VDC
Options • Digital control module ControlD for DIN EN 50022 rail mounting
– Used as a current regulator in open loop applications – Used with an external sensor for closed-loop applications
• Other voltages and coils with flying leads on request • Subbases available on request
Installation • The solenoid valves can be mounted in any
position without affecting operation • Pad-mounting solenoid valve supplied with seal • Pipe connections 1/8 have standard thread
according to ISO 228/1
44 (1.73) 18 (0.71)
9 (0.35)
no function Port 3Port 1
4 mounting holes, max. depth 7mm (0.276in), for self-tapping screw (type EJOT PT, K30)
22 (0.87) 46.2 (1.82)
23.3 (0.92)
no function Port 3Port 1
mounting hole max.7 (4x) for self tapping screws type EJOT PT K30
44 (1.73) 18 (0.71)
9 (0.35)
SERIES
282
Pressure Differential bar (psi) Power Coil
Catalog Number
min. max.
Lead Wires mm (inches) Kv (m3/h) Cv gases, liquids W
Pad Mounting 0.5 (0.02) 0.0066 0.0076 0 0.5 (7.25) 1 LS282A010
Prefix Option
Inrush Holding Hot/Cold
L - - - 1 10 to 40 (50 to 104) - 01
1 Refer to the drawings on following page
Standard Voltages 12 VDC to 24 VDC
General Valve Information Body PEEK Seals FFKM (FKM/EPDM) Diaphragm FFKM (FKM/EPDM) Others Stainless Steel Response Time < 20ms Internal Volume 10µl Max. Viscosity 20 cSt (mm2/s)
Fluids* Temperature Range Seal Materials* Liquids or Gases1 10 °C to 40 °C ( 50 F to 104 F) FFKM
1 Filtration: 50µm * Ensure that the compatibility of the fluids in contact with the materials is verified
• Diaphragm solenoid isolation valves designed for use with neutral and aggressive liquids and gases in analytical instrumentation
• Compact architecture saves valuable space in instrumentation • Ultra-low power consumption of 1 W to meet the most stringent OEM requirements • Excellent self-draining capability and easy-to-flush low-volume internal cavity make
these valves ideal in application where cross-contamination must be minimized • Meets all relevant CE directives, and is RoHS compliant • Typical applications include:
– Pipette Dispensing – DNA Sequencing – POC Instrumentation – Water Analyzers
DIAPHRAGM SOLENOID FLUID ISOLATION VALVES
2/2 Normally Closed
SERIES
282
Installation • The solenoid valves can be mounted in any position
without affecting operation
max.Ø 1.5 (0.06)
Prefix "L" solenoid IEC 335/with pin header with 2 contacts
Type 01
Ordering Example: LS282A01012DC = 2-Way normally closed, 0.5mm (0.02in) orifice, FFKM seals, 12 VDC
Voltage 12DC 24DC
SERIES
282
2.5
2
1.5
1
0.5
P1 (bar)
Pressure Differential bar (psi) Power Coil Catalog Number Options
min.
max.
air, inert gases liquids W stainless steel PVDF FKM EPDM mm (inches) Kv
(m3/h) Cv
2/2 NO - Normally Closed M5 1.6 (0.063) 0.04 0.046 0 - 2 (29)2 - 2 (29)2 - 2.5 SCE282B001 - V E
G1/8 4 (0.157) 0.32 0.370 0 2.5 (36)2 2.5 (36)2 2.5 (36)2 2.5 (36)2 8 9 - SCG282C003 V E 2 See graphs (a) and (b) variation of inlet pressure (P2) for outlet pressure (P1) maintained
Prefix Option
Cold
VA VA W W ºC (ºF) 230 V/50 Hz 24 VDC
SC - - - 2.5 -10 to 60 (50 to 140) - 500701-006 01
23 14 8 9 -10 to 60 (50 to 140) 511239-009 511239-002 02 1 Refer to the dimensional drawings on the following page
Connector Spade plug (cable Ø4-6mm or Ø6-10mm)
Connector Specification 2.5 W (DMX) 2 spade terminals, 2.8 x 0.5mm (DIN 46340) 8 W/9 W (ANX) ISO 4400/EN 175301-803, form A
Electrical Enclosure Protection Type 01: Molded IP40 (EN 60529), Type 02: PPS (Polyphenylene sulfide) glass-fiber reinforced, IP 67 (EN 60529) with plug connector
Standard Voltages 12 VDC to 24 VDC AC ~: 24 V to 115 V to 230 V/50 Hz
* Other voltages available on request
General Valve Information Body Stainless Steel AISI 316 or PVDF (polyvinylidene fluoride) Diaphragm VMQ, FKM or EPDM Others Stainless Steel
Response Time < 10ms (SCE282B001) < 20ms (SCG282C003)
Internal Volume 70µl
Fluids* Temperature Range Seal Materials* Air, Inert Gases, Water,
Oil or Liquids 10 °C to 100 °C ( 50 F to 212 F) FFKM
* Ensure that the compatibility of the fluids in contact with the materials is verified
• Larger orifice sizes make these valves ideal for high flow-rate applications
• Good self-draining capability and low-volume internal cavity to minimize cross-contamination
• Removable and rotatable electrical coils allow for easy installation and worry-free maintenance
– In-vitro Diagnostics – Hematology
– Spectrometry – Water Analyzers
2/2 Normally Closed
SERIES
282
Type Prefix Option Catalog Number Ø A B C D E F G H
Weight
kg
33.9 (1.33)
26.9 (1.06)
71.6 (2.82)
36.6 (1.44)
1 Including coil, without connector. 2 Including coil(s) and connector(s).
Ø
Body Size 001 = 17mm (0.67in) body 003 = 30mm (1.18in) body
Suffix
Pipe Thread E = M5 G = 1/8
Prefix
Options • Other pipe connections available on request • Plug with visual indication and peak voltage
suppression or with lead wire length of 2m (78.7in)
Installation • The solenoid valves can be mounted in any position without
affecting operation. For optimum performance mount solenoid vertical and upright
• Replacement coils are available: 2.5 W (DMX): DC, 12 V, catalog number 500701-005; AC, 24 V, catalog number 500701-006 8 W/9 W (ANX): DC, 12 V, catalog number 511239-001; AC, 24 V, catalog number 511239-002; 115 V, catalog number 511239-007
Type 01 Prefix "SC" solenoid IEC 335/DIN 46340 IP40
Type 02 Prefix "SC" solenoid IEC 335/DIN 46340 IP 67 (EN 60529) with plug connector
SCG282C003SCE282B001
SERIES
282
1
2
Specifications Prefix Option Ports
Orifice Size Flow Coefficient Pressure Differential bar (psi) Power Coil Catalog Number
mm (inches) Kv (m3/h) Cv min. max. W
SC G1/4 4.5 (0.177) 0.450 0.520 0 1 (14.5) 9.0 G282A005xxxx
Connector DIN Spade Terminal
Standard Voltages 12 VDC, 24 VDC
Power Consumption 9 Watts
Seals FKM
Response Time < 20ms
Internal Volume 70µl
Max. Viscosity 37 cSt (mm2/s) * Ensure that the compatibility of the fluids in contact with the materials is verified
Fluids* Temperature Range Media Temperature Range Seal Materials*
Liquids or gases -10 °C to 60 °C (14 F to 140 F)
-10 °C to 80 °C (14 F to 176 F) FKM
2/2 Normally Closed
• Larger orifice sizes make these valves ideal for high flow-rate applications • Good self-draining capability and low-volume internal cavity to minimize
cross-contamination • Removable and rotatable electrical coils allow for easy installation and
worry-free maintenance • Adjustable flow restrictor incorporated into valve body allows for easy
adjustment of media flow-rates from 10% – 100% • Meets all relevant CE directives, and is RoHS compliant • Typical applications include:
– In-vitro Diagnostics – Hematology – Spectrometry – Water Analyzers
SERIES
282
32 (1.26)
90 (3.54)
82 (3.23)
47 (1.85)
43 (1.69)
78 (3.07)
27 (1.06)
24 (0.94)
Flow Restrictor
Ordering Example: SCG282A00524DC = G1/4 ports, 4.5mm (0.177in) orifice, 24 VDC
Dimensional Drawings Dimensions: mm (inches)
Prefix Voltage 12DC 24DCCatalog Number
SC G282A005 xxxx How to Order
Installation • The solenoid valves can be mounted in any position
without affecting operation
and EPDM (ethylene-propylene) seals and diaphragm
SERIES
283
Specifications
Catalog Number Options
min. max.
mm (inches) Kv (m3/h) Cv inert gases liquids W FKM EPDM 2/2 NC - Normally Closed, VMQ Seals
8 (0.31) 2.7 (0.11) 0. 23 0.27 0 5 (72.5) [10/145] 5 (72.5) 6 6 SCH283A003 V E 8 (0.31) 3.4 (0.13) 0. 30 0.35 0 3 (43.5) [6/87] 3 (43.5) 6 6 SCH283A004 V E 11 (0.43) 5.5 (0.22) 0. 55 0.64 0 1.5 (21.8) 1 (14.5) 8 9 SCH283A010 - -
2/2 NC - Normally Closed, EPDM Seals (Optional: FKM) 11 (0.43) 5.5 (0.22) 0. 55 0.64 0 4.5 (65.3) 1 (14.5) 8 9 SCH283A008E V -
2/2 NO - Normally Open, VMQ Seals 8 (0.31) 3.4 (0.13) 0. 30 0.35 0 3 (43.5) 2. 5 (36.3) 6 6 SCH283A016 V E
2/2 NO - Normally Open, FKM Seals 11 (0.43) 5.5 (0.22) 0. 55 0.64 0 1.5 (21.8) 1 (14.5) 8 9 SCH283A018V - -
[ ] Value for differential pressure with FKM and EPDM seals
Prefix Option
Range Replacement Coil
Type1Inrush Holding Hot/Cold
SC 16 10 6 6 -10 to 60 (14 to 40) 43005164 43005149 01 (BMX) 23 14 8 9 -10 to 60 (14 to 40) 43005149 43005144 02 (AMX)
1 Refer to the dimensional drawings on the following page
Electrical Characteristics Coil Insulation Class F Connector Spade plug (cable Ø6-8mm or Ø6-10mm)
Connector Specification with coil 6W/6W (BMX) DIN 43650, 11mm, industry standard B, with coil 8W/9W (AMX) ISO 4400/EN 175301-803, form A
Electrical Safety IEC 335 Electrical Enclosure Protection Molded IP65 (EN 60529)
Standard Voltages1 12 VDC, 24 VDC AC ~: 24 V to 115 V to 230 V/50 Hz (BMX = 50 – 60 Hz)
1 Other voltages and 60 Hz available on request
General Valve Information Body PEI (polyetherimide) Seals VMQ, EPDM or FKM
Response Time ~ 25ms Max. Viscosity 37 cSt (mm2/s)
Air, Inert Gases, Filtered Water, Oil or
Liquids 10 °C to 100 °C (50 °F to 212 °F)
VMQ (silicone)
FKM (fluoroelastomer)
EPDM (ethlyene-propylene)
• Lever mechanism isolation valves designed for use with aggressive and corrosive liquids and gases in analytical instrumentation and the chemical manufacturing industries
• Large orifice sizes make these valves ideal for high flow-rate and high pressure applications
• Ideally suited for quickly flushing systems of corrosive media and routing aggressive reagents to chemical reaction vessels and waste containers
• Available in both a 2-Way normally closed and normally open versions, as well as 3-Way normally closed, normally open and universal versions; each with multiple connection options
– Raw-material Chemical Manufacturing – Pharmaceutical
WITH SPIGOTS
SERIES
283
Pressure inlet: NC function: orifice 1 (type 01) or arrow on body (type 02) NO function: orifice 2 (type 01) or arrow on body (type 02)
N
P
J
2
1
2
1
A
C
D
B
Ø
1 Mounting: 2 holes 4.3mm (0.17in)
Type Prefix Option Catalog Number A B C D E F G H J K L M N P
Weight2
kg
78 (3.07)
43 (1.69)
27 (1.06)
16.5 (0.65)
40.5 (1.59)
1.2 (0.047)
105 (4.13)
35 (1.38)
25 (0.98)
32 (1.26)
4.5 (0.18)
23 (0.91)
Dimensional Drawings
Voltage 12 = 12 VDC 24 = 24 VDC
Catalog Number
Pipe Thread
How to Order
Options • Valves can also be supplied with FKM (fluoroelastomer)
and EPDM (ethylene-propylene) poppet seal • Plug with visual indication and peak voltage suppression
or with cable length of 2m (78.7in)
Installation • The solenoid valves can be mounted in any position without affecting
operation. For optimum performance mount solenoid vertical and upright
• Replacement coils are available: BMX: DC: 12 V, cat. no.: 43005158 /AC: 24 V, cat. no.: 43005161; 115 V, cat. no.: 43005162 AMX: DC: 12 V, cat. no.: 43005143/AC: 24 V, cat. no.: 43005146; 115 V, cat. no.: 43005147
Type 01 Prefix "SC" solenoid DIN 43650
Type 02 Prefix "SC" solenoid ISO 4400
SCH283A010/A008/A018VSCH283A003/A004/A016
SERIES
283
Specifications
min. max.
mm (inches) Kv (m3/h) Cv inert gases liquids W FKM 2/2 NC - Normally Closed, VMQ Seals
1/4 3.2 (0.126) 0.32 0.37 0 1.5 (0.059) 1.5 (0.059) 8 9 SCG283A013 -
5.5 (0.215) 0.55 0.64 0 1.5 (0.059) 1 (0.039) 8 9 SCG283A014 -
2/2 NC - Normally Closed, EPDM Seals (Optional: FKM)
1/4 3.2 (0.126) 0.32 0.37 0 10 (0.126) 2.4 (0.094) 8 9 SCG283A011E V
5.5 (0.215) 0.55 0.64 0 4.5 (0.177) 1 (0.039) 8 9 SCG283A012E V
1/2 10 (0.394) 1.6 1.85 0 1.6 (0.063) 0.25 (0.010) 13 13 SCG283C006E V
2/2 NO - Normally Open, FKM Seals 1/4 3.2 (0.126) 0.3 0.35 0 3 (0.118) 1 (0.039) 8 9 SCG283A019V -
Prefix Option
Cold
SC 23 14 6 9 -10 to 60 (14 to 140) 43005149 43005144 01 (AMX) 44 24 8 13 -10 to 60 (14 to 140) 43005320 43005317 02 (FNX)
Connector Spade plug (cable Ø6-10mm)
Connector Specification ISO 4400/EN 175301-803, form A
Standard Voltages1 12 VDC, 24 VDC AC ~: 24V to 115V to 230V/50 Hz
1 Other voltages and 60 Hz on request
General Valve Information Body G1/4: PEI (polyetherimide) G1/2: PPS (polyphenylene sulphide) Seals VMQ, EPDM or FKM Response Time ~ 25ms Max. Viscosity 37 cSt (mm2/s)
Fluids* Temperature Range Seal Materials* Air, Inert Gases, Filtered
Water, Oil or Liquids -10 °C to 100 °C (14 °F to 212 °F) VMQ (silicone)
EPDM (ethlyene-propylene) * Ensure that the compatibility of the fluids in contact with the materials is verified
• Lever mechanism isolation valves designed for use with aggressive and corrosive liquids and gases in analytical instrumentation and the chemical manufacturing industries
• Available in both 3-Way normally closed, normally open and universal versions, as well as 2-Way normally closed and normally open versions; each with multiple connection options
LEVER SOLENOID FLUID ISOLATION VALVES WITH
THREADED CONNECTIONS
SERIES
283
Pressure inlet: NC function: arrow on body (type 01) or orifice 3 (type 02) NO function: arrow on body (type 01)
A
N
M
P
C
D
H
A
C
D
B
360°
L
K ==
1/2
Type Prefix Option Catalog Number A B C D E F G H J K L M N P
Weight2
kg
78 (3.07)
43 (1.69)
27 (1.06)
16.5 (0.65)
40.5 (1.59)
1.2 (0.047)
105 (4.13)
35 (1.38)
25 (0.98)
32 (1.26)
4.5 (0.177)
23 (0.906)
84 (3.31)
49 (1.93)
28 (1.10)
23.5 (0.93)
61.5 (2.42)
1.2 (0.047)
How to Order
(fluoroelastomer) poppet seal. Use the appropriate optional suffix letter for identification
• Other pipe connections are available on request
• Plug with visual indication and peak voltage suppression or with cable length of 2m (78.7in)
operation. For optimum performance mount solenoid vertical and upright • Pipe connection identifier is G = G (ISO 228/1) • Replacement coils are available:
Type 01(AMX): DC: 12 V, cat. no.: 43005143/AC: 24 V, cat. no.: 43005146; 115 V, cat. no.: 43005147 Type 02 (FNX): DC: 12 V, cat. no.: 43005316/AC: 24 V, cat. no.: 43005318; 115 V, cat. no.: 43005319
SCG283C006 SCG283A011/012/
SERIES
296
Power Coil Catalog Number Options min.
max.
G mm (inches) Kv (m3/h) Cv inert gases liquids W PEEK Stainless Steel FKM 2/2 NC - Normally Closed
1/4 2 (0.079) 0.11 0.13 0 3 (43.5) 3 (43.5) - 6.9 SCG296A007 SCG296A021 V
6 (87) 6 (87) 10.5 11.2 SCG296A008 SCG296A022 V
4 (1.57) 0.32 0.37 0 5 (72.5) 5 (72.5) 10.5 11.2 SCG296A009 SCG296A023 V 6 (87) 6 (87) 16.7 19.7 SCG296A010 SCG296A024 V
3/8 6 (0.236) 0.73 0.84 0 2 (29) 2 (29) 10.5 11.2 SCG296A011 SCG296A025 V 4 (58) 4 (58) 16.7 19.7 SCG296A012 SCG296A026 V
Prefix Option
Type1 Inrush Holding Hot/Cold
SC - - - 5/6.9
-10 to 60 (14 to 140) 43004649 43004647 01
55 23 10.5 9/11.2 400425-117 400425-142 02 57 35 16.7 14/19.7 400425-217 400425-342 02
1 Refer to the dimensional drawings on the following page.
Connector Spade plug
Connector Specification For Coil Type 01 DIN 43650, 11mm (0.43in), industry standard B
For Coil Type 02 ISO 4400/EN 175301-803, form A
Standard Voltages 24 VDC, AV ~: 24V to 115V to 230V/50 Hz
General Valve Information Body PEEK or Stainless Steel, AISI 303 (1.4305) Others Stainless Steel Seals FFKM Bellows PTFE Max. Viscosity 40 cSt (mm2/s)
Oil or Liquids -10 °C to 90 °C (14 °F to 194 °F)1 FFKM (perfluoroelastomer)
* Ensure that the compatibility of the fluids in contact with the materials is verified 1 Total ambient + fluid temperature must not exceed 130 °C (266 °F)
• Bellows system isolation valves designed for use with aggressive and corrosive liquids and gases in analytical instrumentation and the chemical manufacturing industries
• Available in both 2-Way normally closed and normally open versions; each with multiple connection options
2/2 Normally Closed
SERIES
296
13 (0.51)
A B
13 (0.51)
A B
1 2
Type Prefix Option Catalog Number A B C D E F G H
Weight1
kg
01 SC SCG296A007 60 (2.36) 28 (1.1) 17 (0.67) 22 (0.87) 13 (0.51) - 79 (3.1) 94 (3.7) 0.145 SCG296A021 60 (2.36) 28 (1.1) 17 (0.67) 22 (0.87) 17.5 (0.69) 10 (0.39) 76 (3.0) 91 (3.58) 0.310
02 SC SCG296A008/A009/A010/A011/A012 85 (3.3) 50 (1.97) 30 (1.18) 45 (1.77) 13 (0.51) - 100 (3.94) 110 (4.33) 0.420 SCG296A022/A023/A024/A025/A026 85 (3.3) 50 (1.97) 30 (1.18) 45 (1.77) 21.5 (0.85) 15 (0.59) 100 (3.94) 110 (4.33) 0.650
1 Including coil(s) and connector(s)
How to Order
seals and diaphragm. Use the appropriate optional suffix letter for identification
• NPT thread • Plug with visual indication and peak voltage
suppression or with cable length of 2m (78.7in)
operation; however, for optimum performance it is recommended that they be fitted with the solenoid operator at the top
• Solenoid valves have 2 or 4 mounting holes in body • Pipe connection identifier is G = G (ISO 228/1)
PEEK: SCG296A008/A009/A010/A011/A012PEEK: SCG296A007
SERIES
330
21
Specifications
Number Number of Solenoids
min. max. W mm (in) Kv (m3/h) Cv
1/4-28 UNF Flat Bottom 1.57 (0.062) 0.026 0.030 -1 (-14.5) 2 (29) 3302xxS302 2 2.9 (12 VDC), 3.8 (24 VDC)
Electrical Characteristics Standard Voltages 12 VDC, 24 VDC
Power Consumption 2.9 to 3.8 Watts
Duty Cycle Rating Continuous
Coil Insulation 180 °C (356 °F)
Electrical Connection 26 AWG Lead Wire
• PTFE isolation valves are designed for use with highly aggressive liquids
• The PTFE body and diaphragm isolates the internal solenoid components from the media resulting in a virtually impervious valve
• Compact architecture and low power consumption make them ideal for analytical bench-top instrumentation
• Available in a 2, 3, or 4 position PTFE manifold configuration. • Meets all relevant CE directives, and is RoHS compliant • Typical applications include:
– Chromatography – Solvent Selection/Diversion – Sample Preparation – Liquid Spectrometry
PTFE DIAPHRAGM FLUID ISOLATION VALVES
Fluids* Temperature Range Wetted Materials* Liquids or Gases 0 C to 25 C (32 F to 77 F) PTFE, PCTFE
General Valve Information Response Time < 5ms
Internal Volume 20µl port 1 to seat 52µl port 2 to seat
2/2 Normally Closed
SERIES
330
26 AWG PTFE COATED LEADS, 381mm (15in) LONG
INLET PORT, FLAT BOTTOM, 1/4-28UNF-2B x 6.4 (0.25) DEEP, (1) PLACE EACH VALVE
Ø3.8 (0.149) X 6.4 (0.25) DEEP 2X
COMMON PORT, FLAT BOTTOM, 1/4-28UNF-2B x 6.4 (0.25) DEEP
3.18 (0.125)
6.3 (0.250)
Dimensional Drawings 330 Series 2 Position Valve Manifold
Ordering Example: 190212S30 = 2-Way normally closed valve with 1/4-28 UNF, flat bottom ports and 12 VDC coil rated at 2.9 Watts 330224S303 = 3, 2-Way normally closed valves mounted on a manifold with 1/4-28 UNF, flat bottom ports and 24 VDC coil rated at 3.8 Watts
Number of Solenoids S302 = 2 Solenoids S303 = 3 Solenoids S304 = 4 SolenoidsVoltage
12 = 12 VDC 24 = 24 VDC
Catalog Number (see Specifications table)
3302 xx S303 How to Order
SERIES
330
45.7 (1.8)
104 (4.1)
33.8 (1.33)
7.1 (0.280) 36.3 (1.43)
7.9 (0.31) 5.8 (0.230)
1/4-28 UNF x 6.3 (0.25) DEEP, FLAT BOTTOM, OR S–500
ALL PORTS
LEAD WIRE 387.3 (15.25) LONG 26 AWG PTFE COATED
1/4-28 UNF x 6.3 (0.25) DEEP, FLAT BOTTOM, OR S-500 ALL PORTS
NORMALLY CLOSED INLET PORT
Ø19.11 (0.75) TYP.
Dimensional Drawings 330 Series 3 Position Valve Manifold
SERIES
385
min. max.
mm (inches) Kv (m3/h) Cv gases liquids W FKM EPDM 3/2 U - Universal, PEEK Body, FFKM Seals
Pad Mount 1.5 (0.06) 0.03 0.035 0 2.4 (34.8) 2.4 (34.8) - 4 SCS385A001 V E 3/2 U - Universal, PA Body, EPDM Seals
Pad Mount 1.5 (0.06) 0.03 0.035 0 2 (29) 2 (29) - 4 SCS385A002E - -
Prefix Option
VA VA W W ºC (ºF) 12 VDC 24 VDC
SC - - - 4 -10 to 60 (14 to 140) 43005268 43005269 01
Coil Two spade terminals 2.8 x 0.5mm (0.11 x 0.02in) [DIN 46340] [or detachable size 15 connector]
Electrical Enclosure Protection IP40 (EN 60529)
Standard Voltages 1 12 VDC, 24 VDC 1 Other voltages on request
General Valve Information PEEK Body PA Body
Body PEEK PA (polyamide 12)
Mounting Pad PEEK PA
Diaphragm and Discs FFKM EPDM
Mounting Pad Seal FFKM EPDM
Response Time < 20ms < 20ms Internal Volume 67µl 67µl Max. Viscosity 37 cSt (mm2/s) 37 cSt (mm2/s)
Liquids or Gases -10 °C to 80 °C (14 °F to 176 °F) FFKM (perfluoroelastomer)
EPDM (ethlyene-propylene) * Ensure that the compatibility of the fluids in contact with the materials is verified
• Rocker isolation valves are designed for use with neutral or highly aggressive liquids in analytical instrumentation
• Special rocker mechanism, combined with a separating diaphragm, prevents heat transfer to the fluid and eliminates the sticking effect of the valve seat
• Excellent self-draining capability and easy-to-flush low-volume internal cavity make these valves ideal in application where cross-contamination must be minimized
• Removable and rotatable electrical coils allow for easy installation and worry-free maintenance
• Meets all relevant CE directives • Typical applications include:
– In-vitro Diagnostics – Hematology – DNA Sequencing – Surgical Fluid Management
ROCKER SOLENOID FLUID ISOLATION VALVES
3/2 Universal
SERIES
385
m in
. 0 .0
(0 .0
2 x M 2.5 (0.098) /5 (0.2)
1
23
operation • Can be used for the following functions, depending on how the ports
are connected:
P (1)
(fluoroelastomer) and EPDM (ethylene-propylene) seals and diaphragm. Use the appropriate optional suffix letter for identification
• Leaded coil • Power-save version • Connector size 15, catalog number: 88143581
1
23
1 1 Mounting Pad Seal 2 Coil with 2 Faston-type terminals 2.8 x 0.5 (DIN 46340) 3 Mounting: 2 screws M2.5 x 18
Type Prefix Option
Mounting Pad
Type 01
Voltage 12DC 24DC
Pipe Thread
How to Order
SERIES
396
Specifications
Power Coil Catalog Number Options
min. max.
G mm (inches) Kv (m3/h) Cv air, inert gases, liquids W PEEK Stainless Steel FKM EPDM
2/2 NC - Normally Closed 1/4 4 (0.157) 0.26 0.30 0 3 (43.5) 3 (43.5) - 11.2 SCG396A006 SCG396A003 V E -
Prefix Option
Inrush Holding Hot/Cold
SC - - - 9/11.2 -10 to 75 (14 to 167) - 400425-142 01
Connector Spade plug (cable Ø6-10mm)
Connector Specification ISO 4400/EN 175301-803, form A
Standard Voltages 24 VDC
Oil or Liquids 10 °C to 90 °C (50 °F to 194 °F) FFKM (perfluoroelastomer)
• Bellows system isolation valves designed for use with aggressive and corrosive liquids and gases in analytical instrumentation and the chemical manufacturing industries
• Available in both 3-Way normally closed, normally open and universal versions; each with multiple connection options
2
1
3
Materials in Contact with Fluid Body PEEK or Stainless Steel, AISI 303 (1.4305) Others Stainless Steel Seals FFKM Bellows PTFE Max. Viscosity 40 cSt (mm2/s)
2/2 Normally Closed
SERIES
396
H
J
E2
1
Type Prefix Option Catalog Number A B C D E1 E2 F1 F2 F3 G H J
Weight1
kg
How to Order
(fluoroelastomer) and EPDM (ethylene- propylene) seals. Use the appropriate optional suffix letter for identification
• Plug with visual indication and peak voltage suppression or with cable length of 2m (78.7in)
operation However, for optimum performance it is recommended that they be fitted with the solenoid operator at the top
• Solenoid valves have 4 mounting holes in body • Pipe connection identifier is G = G (ISO 228/1)
PEEK: SCG396A006 PPS: SCG396A003
SERIES
458
Specifications
Material Mount Type
Power
mm (inches) Kv (m3/h) Cv min. max. W 2/2 NC - Normally Closed
Hose Barb 1.6 (0.062) 0.035 0.040 PSU Surface 0 2.4 (35) 4581xxx11ES 2.5
Hose Barb 1.6 (0.062) 0.035 0.040 PSU Panel 0 2.4 (35) 4581xxx11EP 2.5
10-32 UNF 1.6 (0.062) 0.035 0.040 PEEK Surface 0 2.4 (35) 4581xxx22ES 2.5
10-32 UNF 1.6 (0.062) 0.035 0.040 PEEK Panel 0 2.4 (35) 4581xxx22EP 2.5
1/4-28 UNF 1.6 (0.062) 0.035 0.040 PEEK Surface 0 2.4 (35) 4581xxx32ES 2.5
1/4-28 UNF 1.6 (0.062) 0.035 0.040 PEEK Panel 0 2.4 (35) 4581xxx32EP 2.5
3/2 U - Universal Hose Barb 1.6 (0.062) 0.035 0.040 PSU Surface 0 2.4 (35) 4583xxx11ES 2.5
Hose Barb 1.6 (0.062) 0.035 0.040 PSU Panel 0 2.4 (35) 4583xxx11EP 2.5
10-32 UNF 1.6 (0.062) 0.035 0.040 PEEK Surface 0 2.4 (35) 4583xxx22ES 2.5
10-32 UNF 1.6 (0.062) 0.035 0.040 PEEK Panel 0 2.4 (35) 4583xxx22EP 2.5
1/4-28 UNF 1.6 (0.062) 0.035 0.040 PEEK Surface 0 2.4 (35) 4583xxx32ES 2.5
1/4-28 UNF 1.6 (0.062) 0.035 0.040 PEEK Panel 0 2.4 (35) 4583xxx32EP 2.5
Electrical Characteristics Coil Insulation 130 °C (266 °F) Connector 26 AWG Lead Wire Standard Voltages 12 VDC, 24 VDC Power Consumption 2.5 Watts
General Valve Information Flange PSU, PEEK Diaphragm EDPM Response Time < 20ms
Internal Volume 2-way 51µl 3-way 62µl
Aggressive liquids 0 C to 45 C (32 F to 114 F) EPDM
3/2 Universal
2/2 Normally Closed
• ASCO’s patented 458 Series rocker isolation valves are designed for use with neutral or highly aggressive liquids in analytical instrumentation
• Special rocker mechanism prevents heat transfer to the fluid, eliminates the sticking effect of the valve seat, and significantly reduces erratic flow of the liquid
• Excellent self-draining capability and easy-to-flush low-volume internal cavity make these valves ideal in application where cross-contamination must be minimized
• Available with barbed ports for 1.6mm to 2mm soft tubing, or threaded flat-bottom ports with 1/4-28 UNF or 10-32 UNF
• Meets all relevant CE directives, and

Documents

Miniature Valve Products - ASCO Valve Net