Mini P PRO-MP50

GASANALYSIS

The pressure is measured with a piezo-resistive sensor.

The Mini P Pro - MP50 micro manometer has its own dual display which continuously shows measure, average, data hold, max. and min. values.

The micro manometer model Mini P Pro - MP50 is a portable, compact digital meter designed for simplicity and one-hand operation.

The micro manometer is equipped with unique features such as a high stability, good repeatability and fast response in order to keep high accuracy of measurement at bad ambient.

Reliable and Accurate

Easy to use

Positive, negative and differential pressure

Min & Max values

Unit selection

eurotronHand-Held Micro manometer

Mini P PRO - MP50

Eurotron - One of the world leaders in high technology equipments: portable flue gas analysers - high accuracy calibrators - non-contact IR thermometers.

"Excellence in Measurements"

ns I trn uo mrt eo nr tu s

E

ISO 9001

Q

du ea tli nty ra G

GASANALYSIS


eurotron

Sp

eci

fica

tion

s m

ay

cha

ng

e w

itho

ut n

otic

e.

Mini P PRO - MP50Micro manometer

Distributed by:EUROTRON Instruments S.p.A.

V.le F.lli Casiraghi 409/413I 20099 Sesto S. Giovanni (MI)

Tel.: +39-02 248820.1 Fax: +39-02 2440286

e-mail: [email protected]

CONFORMITY : electromagnetical compatibility (norm NF EN 61326-1)POWER SUPPLY : 1 Alcaline battery 9 V 6LR6AUTOMATIC SHUT-OFF : 30 minWORKING ENVIRONMENT: Neutral gasWORKING TEMPERATURE: 0 to 50°C.STORAGE TEMPERATURE: 0 to 50°C.DIMENSIONS : 145 x 75 x 34 mmWEIGHT : 190 gLANGUAGES AVAILABLE : French, English.DISPLAY : 2 lines of 12 characters. Size 38 x 12 mm.HOUSING : Shock-proof, made of ABS/PC.KEYPAD : Made of Elastomer : 5 keys.MEASURING ELEMENTS :Pressure: piezo-resistive sensor (linearity: 0.25%FS, response time: 500µs, stability (long term): 0.25%mbarOverpressure allowed: 250mbar

• Selection of the language: (with unit switched off) press and hold “OK”. Then press “ON/OFF”. Press “HOLD” to confirm English and press “SELECT” for French.

• To switch on, press “ON/OFF”. Click on “OK” to start the auto zero. • To modify the unit of measure, press “SELECT”. Scroll down the units by pressing “SELECT”

and confirm your unit by pressing “OK” . Press “ESC” to escape this menu. • To display the min. and max. values, press “MIN/MAX”. To come back to the measure in

progress, press “ESC”. • To hold the measure in progress, press “HOLD” once. Press twice to come back to the

measure. • To switch off, press and hold “ON/OFF” for few seconds.

Measuring units Measuring ranges Accuracy* Resolution

Pressure mmH O, KPa, In Wg, mBar, mmHg 0 to ±1000 mmH O ±2,5% rdg ±1 0.1 mmH O da 0 a ± 199,9 mmH2 2 2 2

0.1 mmH O oltre2

* Performed in laboratory conditions, all the above accuracies mentioned in this document will be guaranteed, provided that you use the calibration compensation data or identical calibration conditions.

USING SPECIFICATIONS

eurotron

ORDERING CODEMini P PRO - MP50: 8220Protective rubber boot: EE880042

GASANALYSIS

Mini T - TK52 thermometer has its own dual display which continuously and simultaneously indicates temperature in ºC or ºF on 2 channels, data hold, max. and min. values and dynamic Delta T.

Thermometers models Mini T PRO - TK52 is a portable, compact digital meter designed for simplicity and one-hand operation.

These thermometers are equipped with unique features such as a high stability, good repeatability and fast response in order to keep high accuracy of measurement at bad ambient. Thermocouples type K are used for temperature measuring.


Easy to use

Display of 2 parameter simultaneously

Protective rubber boot on request

Thermocouple K probe

Dynamic Delta T

Hold function

Min & Max values

Unit selection

eurotronHand-Held Thermometer

Mini T PRO - TK52




E

ISO 9001

Q

du ea tli nty ra G

GASANALYSIS


eurotron

Sp

eci

fica

tion

s m

ay

cha

ng

e w

itho

ut n

otic

e.

Mini T PRO - TK52Thermometer



Tel.: +39-02 248820.1 Fax: +39-02 2440286


CONFORMITY : electromagnetical compatibility (norm NF EN 61326-1)POWER SUPPLY : 1 Alcaline battery 9 V 6LR6AUTOMATIC SHUT-OFF : 30 minWORKING ENVIRONMENT : Neutral gasWORKING TEMPERATURE : From 0 to 50°C.STORAGE TEMPERATURE : From 0 to 50°C.DIMENSIONS : 145 x 75 x 34 mmWEIGHT : 190 gLANGUAGES AVAILABLE : French, English.DISPLAY : 2 lines of 12 characters. Size 38 x 12 mm.HOUSING : Shock-proof, made of ABS/PC.KEYPAD : Made of Elastomer : 5 keys.MEASURING ELEMENTS :temperature : thermocouple K class 1


• To switch on, press “ON/OFF”. Connect the probe (one or two according to the model). Then the measure is displayed

• Press “OK” to display Delta T. To come back to the measure in progress, press “OK” newly.• Units: by pressing “SELECT”, scroll down the units available in air velocity and confirm by

pressing “OK”. Proceed the same way to validate the unit. To escape this menu, press “ESC”• To display the min. and max. press “MIN/MAX” once for the channel 1 and twice for the

channel 2. To display the measure in progress, press “ESC”• You can hold the measure by pressing “HOLD” once. If you press “HOLD” once again, you

come back to the previous menu.• To switch off, press and hold “ON/OFF” for few seconds.


Temperature (TK52) °C,°F, K -200 to +1300°C ±2% rdg ±1°C 0.1°C <999°C, 1°C beyond



eurotron

ORDERING CODEMini T PRO - TK52: 8112Protective rubber boot: EE880042

GASANALYSIS

measuring and compensation.

The Mini T+RH PRO - HD50 Thermo Hygrometer has its own dual display which continuously indicates %RH and Temperature simultaneously in ºC or ºF, data hold, max. and min. values can be shown on the display.

Thermo-Hygrometer Model Mini T+RH PRO - HD50 is a portable, compact digital meter designed for simplicity and one-hand operation.

The Thermo Hygrometer is equipped with unique features such as a high stability, good repeatability and fast response in order to keep high accuracy of measurement at bad ambient. Platinum resistance element (Pt100Ω) is used for temperature


Easy to use



Relative Humidity

Dew Point

Pt100 inside the probe

Hold function

Min & Max values

Unit selection

eurotronHand-Held Thermo Hygrometer

Mini T+RH PRO - HD50




E

ISO 9001

Q

du ea tli nty ra G

GASANALYSIS


eurotron

Sp

eci

fica

tion

s m

ay

cha

ng

e w

itho

ut n

otic

e.

Mini T+RH PRO - HD50Thermo Hygrometer



Tel.: +39-02 248820.1 Fax: +39-02 2440286


CONFORMITY : electromagnetical compatibility (norm NF EN 61326-1)POWER SUPPLY : 1 Alcaline battery 9 V 6LR6AUTOMATIC SHUT-OFF : 30 minWORKING ENVIRONMENT : Neutral gasWORKING TEMPERATURE : From 0 to 50°C.STORAGE TEMPERATURE : From 0 to 50°C.DIMENSIONS : 145 x 75 x 34 mmWEIGHT : 190 gLANGUAGES AVAILABLE : French, English.DISPLAY : 2 lines of 12 characters. Size 38 x 12 mm.HOUSING : Shock-proof, made of ABS/PC.KEYPAD : Made of Elastomer : 5 keys.MEASURING ELEMENTS :Hygrometry : capacitive elementAmbient temperature : Pt100 class A.CABLE : retractable, length 450 mm, up to 2,4m when released

Selection of the language : (with unit switched off) press and hold “OK”. Thenpress “ON/OFF”. Press “HOLD” to confirm English and press “SELECT” forFrench.To switch on, press “ON/OFF”.When plugging the probe, the measure appears.- Selection of unit of measure : press “SELECT” to scroll down thedifferent units. To validate the unit, press “OK” and press “ESC” ifyou wish to come back to the pending measurement unit.- Minimum and maximum values: press once “MIN/MAX” to displaythe values in temperature and press twice to display the hygrometry.Press “ESC” to escape this menu.- Function HOLD : to hold the measure, press “HOLD” and to come back tothe measure, press the same key.- Dew point : to display the dew point temperature, press “OK”. Press once todisplay the dew point. Press twice to display the dew point and the relativehumidity. Press 3 times to come back the dew point menu.To switch off, press and hold “ON/OFF” during few seconds.


Relative humidity %RH 5 to 95 %RH ±2% of reading ±2,5%RH 0,1%RH

Dew point °C,°F, K -20 to +80°C ±2% of reading ±0,3°C 0,1°C

Ambient temperature °C,°F, K -20 to +80°C ±2% of reading ±0,3°C 0,1°C



ORDERING CODEMini T+RH PRO - HD50: 8330Protective rubber boot: EE880042

GASANALYSIS

The air velocity is measured with Hall effect sensor. The ambient temperature is measured with a RTD Pt100.

The Mini Air Pro - LV50 thermo-anemometer has its own dual display which continuously shows measure, average, data hold, max. and min. values.

The thermo-anemometer model Mini Air Pro - LV50 is a portable, compact digital meter designed for simplicity and one-hand operation.

The thermo-anemometer is equipped with unique features such as a high stability, good repeatability and fast response in order to keep high accuracy of measurement at bad ambient.


Easy to use

Display of 2 parameters simultaneously


Air velocity

Automatic average

Pt100 temperature inside the probe

Hold function

Min & Max values

Unit selection

eurotronHand-Held Thermo-anemometer

Mini Air PRO - LV50




E

ISO 9001

Q

du ea tli nty ra G

GASANALYSIS


eurotron

Sp

eci

fica

tion

s m

ay

cha

ng

e w

itho

ut n

otic

e.

Mini Air PRO - LV50Thermo-anemometer



Tel.: +39-02 248820.1 Fax: +39-02 2440286


CONFORMITY : electromagnetical compatibility (norm NF EN 61326-1)POWER SUPPLY : 1 Alcaline battery 9 V 6LR6AUTOMATIC SHUT-OFF : 30 minWORKING ENVIRONMENT: Neutral gasWORKING TEMPERATURE: 0 to 50°C.STORAGE TEMPERATURE: 0 to 50°C.DIMENSIONS : 145 x 75 x 34 mmWEIGHT : 190 gLANGUAGES AVAILABLE : French, English.DISPLAY : 2 lines of 12 characters. Size 38 x 12 mm.HOUSING : Shock-proof, made of ABS/PC.KEYPAD : Made of Elastomer : 5 keys.MEASURING ELEMENTS :Thermo anemometer: Hall effect sensorAmbient temperature: Pt100 class ACABLE: retractable, length 450mm, up to 2.4m when released


• To switch on, press “ON/OFF”. Click on “OK” to start the auto zero. • To modify the unit of measure: press “SELECT” to scroll down the menus (units, average and

airflow). When “units” appears, press “OK”. Scroll down the measure units of air velocity by pressing “SELECT” and confirm by pressing “OK”. Proceed in the same way for the measure units of temperature.

• Calculation of average: press “SELECT” to scroll down the menus. When “average” appears, press “OK”. To start the calculation, press “OK”. To stop the calculation, press “OK”. Then, the result is displayed. To start another calculation, press “OK” and come back to the measure in progress, press “ESC”

• To display the min. and max. values, press “MIN/MAX”. To come back to the measure in progress, press “ESC”.

• To hold the measure in progress, press “HOLD” once. Press twice to come back to the measure.

• To switch off, press and hold “ON/OFF” for few seconds.


Air velocity m/s, fpm 0.4 a 35m/s ±3% rdg ±0.2m/s 0.1m/s

Temperature °C, °F, K -20 a +80°C ±2% rdg ±0.3°C 0.1°C



eurotron

ORDERING CODEMini Air Pro - LV50: 8356Protective rubber boot:EE880042

GASANALYSIS

for air velocity measuring. Optional dedicated cones allow measuring the airflow. The ambient temperature is measured with a RTD Pt100.

The Mini Air HW PRO - VT50 thermo-anemometer has its own dual display which continuously shows measure, average, data hold, max. and min. values.

The thermo-anemometer model Mini Air HW PRO - VT50 is a portable, compact digital meter designed for simplicity and one-hand operation.

The thermo-anemometer is equipped with unique features such as a high stability, good repeatability and fast response in order to keep high accuracy of measurement at bad ambient. A thermistance with negative temperature factor is used


Easy to use

Display of 2 parameters simultaneously


Air velocity

Airflow: direct measuring with cones

Pt100 temperature inside the probe

Hold function

Min & Max values

Unit selection

eurotronHand-Held hotwire Thermo-anemometer

Mini Air HW PRO - VT50




E

ISO 9001

Q

du ea tli nty ra G

GASANALYSIS


eurotron

Sp

eci

fica

tion

s m

ay

cha

ng

e w

itho

ut n

otic

e.

Mini Air HW PRO - VT50Hotwire Thermo-anemometer



Tel.: +39-02 248820.1 Fax: +39-02 2440286


CONFORMITY : electromagnetical compatibility (norm NF EN 61326-1)POWER SUPPLY : 1 Alcaline battery 9 V 6LR6AUTOMATIC SHUT-OFF : 30 minWORKING ENVIRONMENT: Neutral gasWORKING TEMPERATURE: 0 to 50°C.STORAGE TEMPERATURE: 0 to 50°C.DIMENSIONS : 145 x 75 x 34 mmWEIGHT : 190 gLANGUAGES AVAILABLE : French, English.DISPLAY : 2 lines of 12 characters. Size 38 x 12 mm.HOUSING : Shock-proof, made of ABS/PC.KEYPAD : Made of Elastomer : 5 keys.MEASURING ELEMENTS :Hotwire anemometer: thermistance with negative temperature factorAmbient temperature: Pt100 class ACABLE: straight, length 1.7m


• To switch on, press “ON/OFF”. • To display the menu, press “SELECT”. To scroll down the menu (average, cones, units),

press “SELECT” until the menu required is displayed and confirm by pressing “OK”.• Menu “Average”: when “start OK” is displayed, press “OK” to active the calculation of

average. To stop the calculation, press “OK”. Then, the result is displayed. To start another calculation, press “OK”

• Menu “airflow with cones”: by pressing “SELECT”, select the type of cone and confirm by pressing “OK”. The measure is displayed. To escape this menu, press “ESC”.

• Units: by pressing “SELECT”, scroll down the units available in air velocity and confirm by pressing “OK”. Proceed the same way to validate the unit in temperature. To escape this menu, press “ESC”

• In each of these menus, you can display the min. and max. values, by pressing “MIN/MAX”. To come back to the measure in progress, press “ESC”.

• You can hold the measure by pressing “HOLD” once. If you press “HOLD” once again, you come back to the previous menu.



Velocità aria m/s, fpm 0 a 3.0 ±3% rdg ±0.06m/s 0.01m/s3.1 a 30 m/s ±3% rdg ±0.2m/s 0.1 m/s

3 3 3 3 3Flusso aria m /h, cfm, l/s, m /s da 0 a 2000 m /s ±3% rdg ±10 m /s 1 m /s

Temperatura °C, °F, K -20 a +80°C ±2% rdg ±0.3°C 0.1°C



eurotron

ORDERING CODEMini Air HW PRO VT50: 8352Protective rubber boot: Ee880042

GASANALYSIS

The Mini Speed Pro - CT50 tachometer has its own dual display which continuously shows measure, data hold, max. and min. values.

Tachometer model Mini Speed PRO - CT50 is a portable, compact digital meter designed for simplicity and one-hand operation.

Tachometer is equipped with unique features such as a high stability, good repeatability and fast response in order to keep high accuracy of measurement at bad ambient. A phototransistor is used for measuring.


Easy to use



Optical tachometer or contact on request

Hold function

Min & Max values

Unit selection

eurotronHand-Held Tachometer

Mini Speed PRO - CT50




E

ISO 9001

Q

du ea tli nty ra G

GASANALYSIS


eurotron

Sp

eci

fica

tion

s m

ay

cha

ng

e w

itho

ut n

otic

e.

Mini Speed PRO - CT50Tachometer



Tel.: +39-02 248820.1 Fax: +39-02 2440286


CONFORMITY : electromagnetical compatibility (norm NF EN 61326-1)POWER SUPPLY : 1 Alcaline battery 9 V 6LR6AUTOMATIC SHUT-OFF : 30 minWORKING ENVIRONMENT: Neutral gasWORKING TEMPERATURE: 0 to 50°C.STORAGE TEMPERATURE: 0 to 50°C.DIMENSIONS : 145 x 75 x 34 mmWEIGHT : 190 gLANGUAGES AVAILABLE : French, English.DISPLAY : 2 lines of 12 characters. Size 38 x 12 mm.HOUSING : Shock-proof, made of ABS/PC.KEYPAD : Made of Elastomer : 5 keys.MEASURING ELEMENTS :Optical tachometry: phototransistorContact tachometry: ETC type adaptorCABLE: retractable, length 450mm, up to 2.4m when released


• On the first line of the screen, the measure in progress appears and on the second line the kind of tachometer selected: contact or optical

• To modify the kind of tachometer, press “SELECT” until “contact” or “optical” appears. (If you are using “optical”, then only “contact” will be displayed). Confirm your selection by pressing “OK”.

• Units: by pressing “SELECT”, scroll down the units available in air velocity and confirm by pressing “OK”. Proceed the same way to validate the unit in temperature. To escape this menu, press “ESC”

• To display the min. and max. press “MIN/MAX”. To come back to the measure in progress, press “ESC”

• You can hold the measure by pressing “HOLD” once. If you press “HOLD” once again, you come back to the previous menu.



Optical tachometer tr/min, rpm 0 to 50000 tr/min ±1% rdg ±1tr/min 1 tr/min

Contact tachometer m/min, ft/min, In/min 30 to 20000 tr/min ±2% rdg ±1m/min 0.1 m/min



eurotron

ORDERING CODEMini Speed PRO - CT50: 8920Contact adapter: 8924Protective rubber boot: EE880042

Documents

Mini P PRO-MP50