Upload
construction-equipment-guide
View
255
Download
14
Tags:
Embed Size (px)
DESCRIPTION
Midwest #22, 2011
Citation preview
By Dorinda AndersonCEG CORRESPONDENT
Increasingly high water levels over the lastseveral years is once again creating a need toraise road heights and build embankments toprotect the city of Devils Lake in northeasternNorth Dakota. Combating the high water lev-els by raising road levels, moving structuresand building levees has cost almost $1 billionover the years. More than 40 mi. (64.3 km) ofroad have been raised and some are now being
raised even more, an 8-mi. (13 km) embank-ment has been built and is now being length-ened to 12 mi. (19.3 km), and about 300 homesand businesses have been relocated.Devils Lake is a closed basin, meaning it has
no inlet or outlet within the Red River HudsonBay Drainage System, leaving the water levelat the mercy of rain, evaporation or enteringthe groundwater table. The level of the lake hasfluctuated from only 2 ft. (0.6 m) deep in 1940to about 60 ft. (18.3 m) at some points now.
$3.00
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MMiiddwweessttEEddiittiioonn
One of the constants the contractor had to cope with during Phase 3 of the project inJuly of 2011 was slurry, which was effectively dealt with by excavators.
Flooding Becomes Problemin Devil’s Lake Project
By Tim MartinASSOCIATED PRESS
LANSING, Mich. (AP) Supporters of a pro-posed new bridge between Detroit and Windsor,Ontario, scrambled Oct. 20 to revive the plan afterlosing a key vote in a Michigan Senate committee. The Republican-led Senate Economic
Development Committee defeated a measure toauthorize the bridge in a long-anticipated vote.Two Republicans supported the measure and threeopposed it. Democrats abstained from votingbecause the bill didn’t include provisions aimed atprotecting residents in the southwest Detroit neigh-borhoods that would be affected by the new span. A spokeswoman of Republican Senate Majority
Leader Randy Richardville, who sponsored thebridge legislation, said there were no plans to doanything more with the bill defeated and no near-term plans to introduce alternative legislation. That would be a legislative defeat for first-year
Republican Gov. Rick Snyder, who supports thenew bridge. But Snyder wouldn’t quit on the pro-posal Oct. 20, calling for a “cooling down period”to talk to lawmakers about the proposal. “We’re going to continue to pursue this as a
solution because we should build a bridge for ourcitizens,” Snyder said. “It’s in their best interest.”
Detroit-WindsorBridge Fails toClear Key Step
2011 ICUEE Draws
16,000 Attendees...8
Morbark Holds Demo
Days Event...50
McCann Delivers Lunch to
Wacker Drive Crews...12
Inside
Published Nationally
The amount contractors pay for a range ofkey construction materials held steady inSeptember but climbed 8.1 percent from theyear-earlier level, according to an analysis ofproducer price index figures released Oct. 18by the Associated General Contractors ofAmerica. Meanwhile, the price contractorscharge for new nonresidential building con-
struction edged up only 2 to 3 percent over 12months, depending on building type.“Feeble demand for construction is forcing
contractors to absorb the bulk of materialsprice hikes, instead of passing them along toowners,” said Ken Simonson, the associa-tion’s chief economist. “This pattern has per-sisted for more than two years, and many con-
tractors are increasingly at risk of goingunder.”Simonson noted that key materials showed
divergent price trends in September but allposted double-digit year-over-year increases.Those materials include diesel fuel, which wasup 3.3 percent for the month and 39.4 percent
AGC Reports Materials Prices Flatten in Sept.
October 29, 2011 • Vol. XVIII • No.22 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 • www.constructionequipmentguide.com
see BRIDGE page 30see FLOODING page 86
see PRICES page 47
Table of Contents ....................4
Snow & Ice Section..........37-45
Crawler Loaders, Dozers,Undercarriages & Parts Section..........................................51-56
Parts Section..........................57
Paving Section..................71-81
Auction Section ....Starts at 86
Business Calendar ................87
Advertisers Index ..................94
Page 2 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
PATT
EN C
ONST
RUCT
ION
PROD
UCTS
Call 877-688-2228Fax: 630-279-9243
www.pattencat.comComplete inventory available online
Cat 232B, 2004, UN1671, EROPS, Aux Hyd ......................$22,000
Cat 236B, 2005, UN2041, EROPS, Heat, HYD Coup ..........$20,000
Cat 236B, 2005, UE1233, EROPS, Heat, Self-Leveling ......$25,000
Cat 242B, 2006, W1138, EROPS, Quick Coupler ..............$24,000
Cat 246C, 2007, W1613, EROPS, Heat, Man, QC ..............$26,500
Cat 246C, 2008, UE1047, EROPS, Heat, Aux Hyd ............$36,000
Cat 247B, 2005, UN1610, EROPS, Heat, Hyd QC ..............$28,000
Cat 252B2, 2008, UE1456, Hyd QC, Self Leveling ............$22,000
Cat 256C, 2007, W1533, EROPS, Heat, A/C ......................$32,000
Cat 257B, 2005, W0539, Self-Leveling, Man QC ..............$27,000
Cat 257B, 2007, W1522, EROPS, Heat ..............................$29,000
Cat 262B, 2005, W0523, OROPS, Aux Hyd ......................$24,000
Cat 267B, 2005, UN1930, Self Leveling, QC ......................$21,000
Cat 277, 2003, UN2127, EROPS, Heat, No Door ..............$19,000
Cat 287B, 2007, W1561, Self-Leveling, Man QC ..............$39,000
Cat TH360B, 2006, N4761, EROPS, Heat, A/C ..................$49,000
Cat 305CR, 2005, W0279, EROPS, A/C, Long Stick ..........$36,000
Cat 315CL, 2006, N4867, EROPS, Heat, A/C, QC ..............$78,000
Cat 315CL, 2007, N5239, EROPS, 10’2” Stick, QC............$80,000
Cat 325DL, 2007, N5591, 10’6” Stick, Coupler................$180,000
Cat 345CL, 2006, UN1823, EROPS, 12’ 10” Stick, QC ....$260,000
Hitachi ZX450-LC, 2007, UE1446, EROPS, 6160 Hrs......$149,000
Cat 953C, 2006, N4908, EROPS, A/C, GP Bkt....................$80,000
Cat 953C, 2006, N4827, EROPS, A/C, GP Bkt ..................$80,000
Cat 953C, 2006, N4907, EROPS, 2.25 CYD GP Bkt ..........$85,000
Cat 963C, 2005, N4354, EROPS, A/C, GP Bkt ................$125,000
Cat 963C, 2007, EROPS, A/C, GP Bkt ..............................$145,000
Cat 963C, 2007, N5429, EROPS, 3 CYD GP Bkt ..............$145,000Cat 963C, 2007, N5363, EROPS, 3 CYD GP Bkt ..............$145,000
SKID STEERS
TELEHANDLERS
EXCAVATORS
TRACK LOADERS
Chad Benz630-758-1226
Cat 140M, 2008, N5749, EROPS, A/C, Heat, 14’ Blade, Ripper ......
........................................................................................$285,000
Cat CS54, 2008, N5757, OROPS, Sm Drum ....................$115,000
Cat CS-433E, 2005, UN2129, OROPS................................$48,000
Cat CP-563C, 1998, UN2209, OROPS, Blade ....................$58,000
Cat D4G LGP, 2006, N4970, EROPS, A/C ..........................$65,000
Cat D5G LGP, 2006, N4976, EROPS, A/C ..........................$84,000
Cat D5G XL, 2007, N5413, EROPS, Heat, A/C ..................$80,000
Cat D5K LGP, 2008, N5711, EROPS, Heat, 3rd Valve ......$106,000
Cat D6K LGP, 2009, N6055 NA, EROPS, 4 Valve Hyd......$148,000
Cat D6N XL, 2005, UE1443, EROPS, PAT Blade ..............$135,000
Cat D6N XL, 2007, N5477, EROPS, Heat, A/C ................$190,000
Cat D6R XL, 2006, UN1811, EROPS, A/C, SU Blade ......$229,000
Cat D6R XW, 2001, UN2072, EROPS, A/C, Ripper Hyd ....$95,000
Cat 416E, 2007, N5303, EROPS, Heat, A/C, E-Stick ..........$78,000
Cat 420E IT, 2006, N4926, EROPS, A/C, E-Stick................$65,000
Cat 420E IT, 2008, UE1253, EROPS, Heat, A/C, E-Stick ....$70,000
Cat 430E, 2007, N5471, EROPS, Heat, A/C, Ride Cntrl......$80,000
Cat 430E, 2007, N5415, EROPS, Heat, A/C, QC ................$96,000
Cat 430E IT, 2006, N5209, EROPS, A/C, E-Stick................$56,000
Cat 906, 2008, UE1441, EROPS, A/C, 3rd Valve................$65,000
Cat 924GZ, 2007, N5786, EROPS, Heat, Ride Control ....$100,000
Cat 924GZ, 2008, N6148, EROPS, Heat, A/C, 2.6 CuYd Bkt ....$94,000
Cat 928HZ, 2008, N5866, EROPS, 3.1 CYD Bkt, QC........$118,000
Cat 928HZ, 2008, N5878, EROPS, 3.1 CYD Bkt, QC........$118,000
Cat 930G, 2006, UN1922, EROPS, Heat, A/C ..................$122,000
Cat 930G, 2007, N5772, EROPS, 2.9 CYD Bkt, Ride Cntl ..$115,000
Cat 930H, 2008, N5661, EROPS, Ride Cntl ........................$132,000
Cat 938GII, 2006, N5064, EROPS, A/C, Heat, Ride Cntrl $100,000
Cat 950H, 2007, N5284, EROPS, Heat, Ride Cntrl ..........$175,000
Cat 950H, 2007, N5594, EROPS, Heat, Ride Cntrl ..........$190,000
MOTORGRADERS
COMPACTION
DOZERS
WHEEL LOADERS/LOADER BACKHOES
CALL 887-688-2228 INVENTORY CHANGES DAILY
ID# N4761 $49,000
ID# UN1922 $122,000
ID# UN1823 $260,000
ID# N5749 $285,000
ID# N5413 $80,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 3
320 Briscoe Drive Morris, Illinois 60450Toll Free: (800) 941-2133Email: [email protected]
www.iltruck.com
2009 Ford F150 King Ranch Lariot, 4x4, 5.4L FFV, CruiseControl/Tilt Wheel, Auto Temp Control, Heated/CooledFront Leather Captains Chairs, Memory Driver SeatPedals, Power Sliding Rear Window, Rear View Camera,Sirius Radio, Sync Voice Activated System, UniversalGarage Door Opener, Power Windows/Locks, TrailerTowing Package, 38,005 Miles ..............................$32,500
1973 Cat 815A, 4- 38” padfoot drums with cleaners,canopy, Cat 3306 10.5L 170HP diesel, 11’ 9”hydraulic leveling blade, 40,058 lbs, meter reads2269 hrs ........................................................$34,500
(2) 2008 Icon 819’s, 19 cubic yard ejectors, 10’ cut,heavy cast 360 swivel quick hitch, 27,500 lbs. 2- 29.5x25 tires, hydraulic brakes ............................POR
2006 Icon 18D, 18 cubic yard hydraulic dump, 11’ cut,(4) 20.5x25 tires, hydraulic brakes............................POR
2009 Bomag BW278 AD, 78” vibratory double drumsmooth compactor, canopy, Cummins QSB4.5 Tier 3130HP diesel, 27,060 lbs, joystick controls, front andrear spray system, 254 hrs ............................$89,500
1990 Case 585E, cab, Case 4-390 75HP diesel,5,000# capacity @ 24” load center, 12’ reach, 2 stagemast. 60” carriage, sideshift, 4’ forks, 19.5L-24 fronttires, LT235/85R16 rear tires, 6443 hours ....$12,500
2006 Reynolds 17CS12, 17 Yard Dump, 12’ Cut, (4)20.5x25 Tires..................................................$37,500
2005 Noram 65E, canopy, 83HP New Holland diesel,4WD, 10’ moldboard, 15-19.5 tires, front scarifier,powershift, 16,800 lbs, 1636 hrs ..................$49,500
1984 Hyster Loyboy, 21’3”x8’ deck, 7’4” rear deckover 8.25-15 tires, air brakes, hydraulic lift, D rings ........................................................................$12,500
2008 JCB 506-36, UNUSED, canopy, JCB444 85HPdiesel, 4WD, 6,000# capacity, 36’ reach, 48” x 48”carriage, 13.00-24 foam filled tires, 3 mode steer,aux. hydraulics, 36 hours ..............................$44,500
2006 Finn B260 Straw Blower, John Deere 4045T115HP diesel, 20 ton/hour, 100’ range, power feedconveyor chain, pintle hitch, LT235/85R16 tires,4,800 lbs., 405 hours ....................................$22,500
2003 Cat 725, cab with A/C, Cat C11 309HP diesel,25 ton capacity (18.8 yards), 6WD, 23.5R25 tires,49,100 lbs., 8,841 hours ................................$89,500
2001 Cat D5C LGP III, cab with A/C, Cat 3406T 90HPdiesel, 26” pads, 10’ 6” 6-way blade, hydrostat drive,drawbar, 19,256 lbs., 3,917 hours..................$34,500
2005 Superior DT80J, cab with A/C and heat, 8’ polyangle broom, JD 4045D 80HP dsl, 2 speed hydrostat-ic, 235/75R15 tires, 170 gallon water system, joystickbroom controls, road lights, beacon, 798 hrs $26,500
(4) 2007 Icon 821 Scrapers, 21 cubic yard ejectors, 11’cut, heavy cast 360 swivel quick hitch, 26,500 lbs., (2)20.5x25 inside tires, (2) 23.5x25 outside tires$44,500 Ea.
(4) UNUSED 2007 Icon 418T Scrapers, 18 cubic yardhydraulic dump, 11’ cut, heavy cast 360 swivel quickhitch, 23,200 lbs., (4) 20.5x25 tires ........$39,500 Ea.
RENTAL FLEET REDUCTION SALE
Page 4 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2011, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occa-sionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any adver-tising.
IN THIS ISSUESPECIAL SECTION…CRAWLER LOADERS, DOZERS, UNDERCARRIAGES & PARTSBe sure to check out this special section! Keep up to date with the latest information on crawler loaders, dozers,undercarriages and parts.
FEATURES…ICUEE CELEBRATES SECOND LARGEST EVENT IN SHOW HISTORY The show attracted nearly 16,600 registered attendees to interact withmore than 800 exhibitors, showing equipment and products on more than1.1 million net sq. ft. of displays.
MCCANN INDUSTRIES DELIVERS FOR WACKER DRIVE WORKERS On Oct. 7 McCann Industries held a cookout and fed hundreds of tradesmen from the James McHugh Construction Co., the general contractor for the Wacker Drive rebuild project.
BALE EQUIPMENT SOLUTIONS HOLDS CASE TRIPLETHREAT RODEO While the event helped introduce Bale Equipment Solutions as a local Case dealer, the rodeo also proved to be a big draw for CaseEquipment Company.
ALBAN TRACTOR, ZIEGLER CAT APPOINTED ASNORAM DEALERS The NorAm 65E follows a 60 year heritage of compact graders originatingwith the Allis Chalmers model “D” in 1949.
MURPHY TRACTOR & EQUIPMENT HOSTS CUSTOMER LUNCHEONMore than 100 individuals attended the gathering, where they enjoyedlunch, learned about John Deere equipment, and had a chance to interactwith Murphy Tractor personnel.
ARCTIC SNOW & ICE, PATTEN INDUSTRIES WELCOME SNOWFEST Attendees got a chance to experience first-hand the combination of Arcticsnowplows and Cat machines as a system for snow removal.
DEALERS FROM 15 COUNTRIES ENJOY MORBARK’SDEMO DAYS The event drew more than 300 customers and dealers from 15 countrieseager to see the new machines Morbark launched during the event.
36
35
22
12
8
51
83 CLASSIFIEDS87 BUSINESS CALENDAR88 COMING AUCTIONS
EQUIPMENT…89 LIEBHERR LRH 100 Piling Rig
8
12
22
37
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Vice President Emeritus Hal Ewing
Midwest Publisher Joseph S. McKeonEditor In Chief Craig Mongeau
Associate Editor Ken KolasinskiEditorial Consultant Pete Sigmund
Production Mgr. John PinkertonController Tom Weinmann
Circulation Mgr. Rolf Krog Asst. Circulation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910Web site www.constructionequipmentguide.com
Editorial e-mail [email protected] e-mail [email protected]
For advertising rates Contact Joseph S. McKeon
•Illinois • Wisconsin • Northwest Indiana
• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail [email protected]
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio
• Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail [email protected]
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota
• South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail [email protected]
51
37
50
®
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 5
Tiger TSR-60C, ’06, NEW ........................$14,500Tiger TSF-75C, ’06, 60 hrs ........................$12,00
Caterpillar 314CLCR, ’05, 4,009 hrs ......$79,500Deere 450CLC, ’05, 4,962 hrs ..............$132,500Kobelco K916LC MarkII, ’90, 9,285 hrs ..$22,500Komatsu PC35MR-2, ‘08, 301 hrs ..........$49,500Komatsu PC150LC-6, ‘98, 9246 hrs ........$39,500Komatsu PC200LC-7, ‘05, 4000 hrs ........$92,500Komatsu PC200LC-7, ‘02, 3044 hrs ........$97,500Komatsu PC200LC-8, ’07, 4,915 hrs ......$99,500Komatsu PC200LC-8, ’08, 4,293 hrs ....$102,500Komatsu PC228USLC-3, ‘01, 6917 hrs....$84,500Komatsu PC270LC-7, ’04, 4,608 hrs ....$132,500Komatsu PC300LC-7EO, ‘06, 3004 hrs..$159,500Komatsu PC300LC-7EO, ‘07, 1230 hrs..$189,500
Doppstadt DW3060K, ’09, 328 hrs ..............CALLDoppstadt DW3060SA, ’09, 410 hrs ............CALLDoppstadt SM617, ’09, 290 hrs ..................CALLDoppstadt SM720, ’09, 235 hrs ..................CALLDoppstadt SM726, ’09, 257 hrs ..................CALL
Dresser TD7H, ’98, 3,354 hrs ..................$19,500Komatsu D31PX-21, ’03, 2,956 hrs ........$48,500Komatsu D39PX-21A, ’07, 2,667 hrs ......$59,500Komatsu D39EX-21A, ’05, 1,176 hrs ......$57,500Komatsu D61EX-15, ’05, 4,778 hrs ......$114,500Komatsu D65EX-12, ’98, 4,850 hrs ........$51,500Komatsu D65PX-12, ‘96, 4969 hrs ..........$52,500Komatsu D85E-12, ’78 ............................$24,500
Gehl 1649 Paver, ’01, 433 hrs ................$24,500Hypac C747B, ’01, 3,524 hrs ..................$11,500Hyster C748A, ’92, 4,454 hrs ....................$3,500Ingersoll Rand DD34HF, ’07, 2,788 hrs ..$16,500LeeBoy 1000D, ’03, 1475 hrs ..................$19,500LeeBoy 7000T, ’01, 2,300 hrs ..................$29,500LeeBoy 8500LD, ’00, 1535 hrs ................$29,500LeeBoy 8500LD, ‘04, 2739 hrs ................$26,500LeeBoy 8500LD, ’04, 1823 hrs ................$33,200LeeBoy 8510LD, ’06, 306 hrs ..................$79,500Rosco TRUPAC915, ‘05, 481 hrs ............$39,500Vogele 880WB, ’05, 4,739 hrs ................$49,500Wirtgen W600DC, ’05, 610 hrs ..................$CALLWirtgen W600DC, ’03, 2800 hrs ................$CALLWirtgen W2000, ’03, 2996 hrs ..................$CALLWirtgen W2000, ’96, 9346 hrs ..................$CALLWirtgen WR2500S, ’07, 3,100 hrs ............$CALL
Case W30, ’86, 6,426 hrs ........................$16,500Komatsu WA200-5, ‘07, 2528 hrs ..........$93,500Komatsu WA320-6, ’08, 3961 hrs ........$126,500Komatsu WA380-5L, ‘04, 6957 hrs ......$106,500Komatsu WA380-5, ‘06, 4965 hrs ........$132,500Komatsu WA400-5L, ’04, 7,169 hrs ......$112,500Komatsu WA420-1, ’88............................$39,500
Concept Products CP2000, ’06, 267 hrs....$8,500Concept Products CP4000, ’04, 927 hrs....$8,500
Komatsu WB140-2N, ’04, 2,805 hrs ..........$CALL
Fabtek 346B Forwarder, ’03, 8978 hrs..$125,000Fabtek 344LB Forwarder, ’02, 13,200 hrs ............................................................................$42,000Fecon FTX130-FM, ’06, 875 hrs ..............$86,500Franklin 132XL Forwarder,......................$16,000Franklin 3000/Stroke Head, ’92 ................$9,800K-2 Four Wheel Forwarder, ’05, 2,160 hrs ....$90,000Log Lift F-135 Log Loader, ’05..........................$7,000Timberjack 1270D, ‘03 ..............................$149,000Timberjack 1270D, ’05, 7,575 hrs ................$180,000Valmet 415EX/Rolly II, ’06 ....................$245,000Valmet 425EXL w/Quadco, ’06, 5,700 hrs ..........................................................................$210,000Valmet 840.3/8, ’05, 9800 hrs ..............$165,000Valmet 840.3/8, ’06, 9,592 hrs..............$185,000Valmet 911.3/370.2, ’06........................$215,000
DOZERS
EXCAVATORS
WHEEL LOADERS
COMPACTION, MILLING & PAVING
SHREDDERS, TROMMELS
BOOM MOWERS
FORESTRY
BACKHOE LOADER
AIR CURTIN DESTRUCTORS
15 Roland Branch Locations in IL, IN, MI, MO, and WI
V
I
S
I
T
R
O
L
A
N
D
M
A
C
H
I
N
E
R
Y.
C
O
MCall Jay Germann (217) 789-7711 • Email: [email protected]
Wirtgen WR2500S, ’07, 3,100 hrs ............$CALL Komatsu D61EX-15, ’05, 4,778 hrs ......$114,500
Komatsu PC200LC-8, ’07, 4,915 hrs ......$99,500 Komatsu WA420-1, ’88............................$39,500
Financing Available for Qualified Buyers
Page 6 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CX130 Excavator
$410/Day, $1,230/Week, $3,690/Month
CX240 Excavator
$700/Day, $2,100/Week, $6,300/Month
CX210 Excavator
$580/Day, $1,740/Week, $5,220/Month
CX460 Excavator
$1,235/Day, $3,705/Week, $11,115/Month
CX160 Excavator
$475/Day, $1,425/Week, $4,275/Month
CX330 Excavator
$875/Day, $2,625/Week, $7,875/Month
CX225 Excavator
$755/ Day, $2,265/Week, $6,795/Month
Excavator Rental Specials
Rent Today!
Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site
McCannOnline.com
IllinoisAddison
630-627-0000
Bolingbrook*630-739-7770
Chicago312-942-9200
Crestwood708-597-3110
McHenry*815-385-0420
Wauconda847-526-9444
IndianaSchererville*219-865-6545
* Case authorized dealer location
Serving the Constructor ®
STARE Q U I P M E N T
LT D .
Call Sales 515-283-2215 • 800-352-54011401 2nd Ave • Des Moines, IA 50314
�CONSTRUCTION EQUIPMENT & SUPPLIESSINCE 1968
www.starequip.comDes Moines • Ames • Cedar Rapids • Waterloo
Gehl RS5,6,000# Lift, 34'Boom, OpenCanopy, I/D:811425, 2800Hrs, $27,995
Mustang 442Skid Loader,40HP, OpenCanopy, SinglePin, I/D:6419222308,5252 Hrs, $8,995
Gehl DL6, 6000#Lift, 42’ Boom,Open Canopy,Outriggers, I/D:320796, 2770Hrs, $35,950
MustangME7503ZT, 16,000#Excavator,Cab, Heat, I/D:C03291, 1700Hrs, $57,995
MustangME3803ZT,7,700#Excavator,Cab, I/D:E02237, 1175Hrs, $30,995
MustangMTL16 TrackLoader, 67HP,Open Canopy,I/D: 300617,1825 Hrs,$21,995
CALL DOUG OR SAM(866) 485-7180WWW.RBUSED.COM
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 7
Please Contact Bob Williams or Jeff Speer 11200 W Silver Spring Rd. Milwaukee, WI 53225
800/353-1944 414/461-9100 www.FABCO.comOutside WI & Upper Michigan Within WI & Upper Michigan Hundreds of machines. Listings updated daily.
2008 New Holland L180 ......................$23,500S/N N8M489391, 3257 hrs, Erops, A/C, 2-speed,
bucket, hyd coupler, tires good
2000 Cat 320BL ....................................$62,500S/N 6CR04830, 6283 Hrs, EROPS, 48” Bkt,
U/C Good
1994 CAT D4HXL ..................................$28,500S/N 8PJ00616, 9847 hrs, Orops,
90% undercarriage remaining, V PAT BLADE
1995 CAT CB214C ................................$13,500S/N 9XK00201, 888 hrs, 39" roller,
rops, working lights
2005 Cat 226B ......................................$19,500S/N MJH05203, 689 hrs, Erops, manual coupler,
aux hyd, 66” bucket, tires good 1-speed
1968 Cat D7E ........................................$23,500S/N 48A10602, Hours Unknown, OROPS, SU
Blade w/Tilt, U/C Good
2000 Cat 980G ....................................$120,000S/N 2KR03995, 15,866 hrs, Erops, 7 YD bucket, tires good to fair
2006 Cat D5KLGP................................$115,000S/N YYY00151, 1504 hrs, Erops, A/C,
26” tracks, blade
2005 CAT 247B ......................................$21,000S/N MTL01299, 2,274 Hrs, EROPS,
Aux. Hyd., Good U/C, Bucket, Heat, 1-speed
1998 Cat D6RLGP..................................$75,000S/N 9PN00987, 9119 hrs, Orops,
Good U/C – turned, S blade, no leaks
1986 Cat 950B ......................................$49,000S/N 22Z02424, Erops, hyd coupler, tires fair,
bucket, rebuilt trans & axles in 2010, 24500 hrs
1978 Champion 715A ..........................$13,500S/N 715A-13-43-11633, 6499 Hrs, EROPS, Front
Scarifier, Tires Good to Fair
1985 Cat 916 ..........................................$24,000S/N s/n 2XB00891, 3921 hours, Erops, heat,
2 yard bucket, tires good
1977 Cat D6D ........................................$29,500S/N 04X01976, 6041 Hrs, OROPS, S Blade
with Hydraulic Tilt, 22” Pads
2008 Cat 272C........................................$33,500S/N RED00965, EROPS, A/C, Tires Fair,
1743 hrs, Hyd Quick Coupler
1979 Cat 631D ......................................$49,500S/N 24W02603, 9284 Hrs, OROPS, Tires Fair
Page 8 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
see ICUEE page 70
ICUEE Celebrates Second Largest Event in Show History The 2011 International Construction and Utility
Equipment Exposition (ICUEE), the secondlargest in show history, was held Oct. 4 to 6 at the
Kentucky Exposition Center in Louisville, Ky.The show attracted nearly 16,600 registered attendees
to interact with more than 800 exhibitors, showing equip-ment and products on more than 1.1 million net sq. ft. ofdisplays and extensive hands-on equipment demonstra-tions in job-like conditions.“We’re very pleased and gratified by industry support
of the show with these strong numbers during a still-recovering economy,” said ICUEE Show DirectorMelissa Magestro. “Despite some uncertain market con-ditions, our industry is looking ahead to be ready forfuture business."”Registrants came from all 50 states, all 10 Canadian
provinces and more than 40 other countries worldwide.Returning to ICUEE were the H2O-XPO of the
National Rural Water Association and the iP SafetyConference and Expo. The Association of EquipmentManagement Professionals (AEMP) sponsored a newFleet Management Exhibit Pavilion and also developed ashow education track for fleet management professionals.A Sustainable Energy Pavilion highlighted “green”
technology. The importance of job site safety was dis-cussed in the iP Safety Arena at ICUEE and at the new“Safety Zone” from the National Commission for theCertification of Crane Operators (NCCCO).ICUEE’s popular online New Products &
Technologies Preview returned, with special booth floormats on the show floor to identify participating compa-nies. Many exhibitors also signed up for the new online“Technical Experts Directory,” which alerted attendees tothe industry experts on-site and ready to discuss specificjob performance needs. These programs and the onlineShow Planner exhibitor listings will remain on the showWebsite for several months.For more information, visit www.icuee.com.
Derek Trimingham of Tractor Works, Free Union, Va., is pleased to have a chanceto demo this John Deere 323D skid steer with VR73C vibratory roller attachment.
(L-R): Lance Rydbom, John Bair, Guillermo Vazquezand Briette Baxter were on hand to help NationalCrane introduce its new NBT45 at the show.
Bob Byrne (L) of Kelly Tractor joins Link-BeltConstruction Equipment’s Scott Knight to talk about itsnew TCC-1100 telescopic crawler crane with ICUEE atten-dees.
(L-R): Kip Bancroft and Brian Benck of West Side TractorSales and Woods Construction Equipment’s DoreenPutnam get a chance to meet at the ConstructionEquipment Guide booth.
(L-R): MB America’s Max Ravazzolo and Guido Azzolin catch up with customersHoward Madden and Donald Marcotte of the city of Winter Park, Fla., and CaseyReed of MB America.
(L-R): Paul Hecker, Mark Whaley and Jim Brown ofPalfinger North America show off the Pal Pro 72,Palfinger’s 72,000 ft./lb. crane body mechanic truckpackage.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 9
ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Cat IT28G, 1998, EROPS, coupler, 3rd valve,20.5 x 25 rubber, 15K hours, work ready . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$42,500Cat 936E, 1989, EROPS, 2.75 cy GP bkt,clean . . . . . . . . . . . . . . . . . . . . . . . .$59,000Komatsu WA250-3PT, 1999, EROPS w/AC,JRB coupler, bucket, forks 20.5x25, goodcond. . . . . . . . . . . . . . . . . . . . . . . .$63,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 $79,500John Deere 624G, 1996, EROPS, quick cou-pler, GP bkt, 20.5x25 tires . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd,boom susp, 20.5R25, v. good . . . .$89,500
IR SD100D Pro-Pac Vibratory Compactor,1999, Hydrostatic trans 84" smooth drum,drum drive . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS,very clean . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean . . . . . . . . . . . . . . . . . . . . . . . . . . . .$69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smoothw/pad kit, ROPS . . . . . . . . . . . . . . .$62,500IR SD70D, 2000, Pro-Pac, 66" smooth drum,ROPS . . . . . . . . . . . . . . . . . . . . . . .$49,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, goodfeet, very nice . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-bladew/tilt, all work ready . . . . . . .From $79,500Multiquip MR8G Walk Behind VibratoryCompactor, 1997, Briggs & Stratton 8 HP gasengine . . . . . . . . . . . . . . . . . . . . . . . .$2,500Rammax Walk Behind Rollers, over 25 instock, lever & remote . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum &single drum, tow type . . . .$4,000 - $6,500
Case 480 Broom Tractor, frt mounted 6'sweepster broom, ROPS . . . . . . . .$13,000Case/IH 485 Utility Tractor, 1986, Case 3 cyldsl engine, 55 gal water tank . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dslengine, 72" hydraulic broom . . . . . .$11,500Taylor-Way 12' Transport Disc, 24" discs, (4)tires, hyd lift, exc . . . . . . . . . . . . . .$15,500Rome TRCH16 Disc, hyd offset disc, 16 ea32” dia, Hyd angle tongue, scrapers, 2” axles . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$9,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17”DBG pads . . . . . . . . . . . . . . . . . . . .$46,000
Komatsu CD60R-1 Crawler Dump Truck,1997, 360° rotation . . . . . . . . . . . .$66,000Volvo A40, 1998, 40 tons, 10991 hrs, 395hp, 8WD, 29.5R25, A/C, 29 cy cap. side-boards, tailgate (currently off work), workready . . . . . . . . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C,29.5R25, working everyday . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD,20.5R25, A/C, P/S trans, 29 cy cap., 6/06hitch rebuilt . . . . . . . . . . . . . . . . .$115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD,29.5R25, A/C, P/S trans, tailgate, work ready . . . . . . . . . . . . . . . . . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25tires, approx 7,000 hrs, good condition . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD,26.5x25, A/C, P/S trans, working everyday onjobsites . . . . . . . . . . . . . . . . . . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD,26.5R25, A/C, P/S trans, 26 cy, workingeveryday on jobsites . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296hp, 6WD, 23.5R25, 21 cy cap, A/C, P/S trans,works everyday . . . . . . . . . . . . . . .$122,500
Cat D6H, 1987, Semi U blade w/tilt, ROPS,fair U/C . . . . . . . . . . . . . . . . . . . . . .$74,000(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade, winches, v. good . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PATblade . . . . . . . . . . . . . . . . . . . .$39,000 Ea.
Broderson IC80-1B, 1984, 8.5 ton, Perkinsdsl, OROPS, 20’ boom,, 3500hrs, good . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$19,500Broderson IC80-2E, 1997, 8.5 ton, 24’ boom,dual fuel, 10.00R15 tires, 3,400 hrs$21,500Grove RT58C, 1981, down cab, 18 ton r.t.,70' boom anti-two block, GM dsl, clean . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .$49,500Drott 3330B Carry Deck, 7.5 ton capacity,dsl, 4 section boom 8' jib . . . . . . . .$14,500
Cat 613C Water Wagon, 1994, 5000 gal droptank, ROPS, spray heads . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2,very good condition . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29,very nice . . . . . . . . . . . . . . . . . . . . . . .CALL(2) Cat 637 scrapers, 1975, 91P series, dualengine, OROPS, good rubber . .$23,500 Ea.
JD 490E, 1994, 9'11" stick, Aux. hydraulics,quick coupler, 6-7000 hrs, Fleet maintained . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$29,000Hitachi UH181, 1985, Equipped w/hammer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$72,000Gradall-Hopto 300, 1968, G.M. diesel UP, onrubber, operational . . . . . . .$10,500/OFFERCat 215BLC, 1985, 7'3" stick, 28" TBG pads,10 roller U/C . . . . . . . . . . . . . . . . . $31,500Kobelco SK200LC Extra Long Reach, 1993,32" TBG pads, 42' reach, nice . . . .$68,500Komatsu PC200 LC-6, 1996, 32" pads, 42"Bkt, long stick . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7"stick, 44" Bkt . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30"bkt, 27.6" TBG pads, work ready . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . .CALLKomatsu PC750 LC-6, 1999, 454 hp, 27”boom, 11’10” stick, 44’ DGB, aux plumbing,bucket choice, 24k ctwt . . . . . . . .$255,000Komatsu PC400 LC-6LK, 1999, 10’6” stick,JRB coupler, 31.5” TBG, ctwt removal, choiceof bkt . . . . . . . . . . . . . . . . . . . . . . .$77,500Komatsu PC400 LC-6LK, 11’1” stick, 35.5”TBG, ctwt removal, choice of bkts, workingeveryday . . . . . . . . . . . . . . . . . . . . .$97,500Komatsu PC160 LC-7KA, 2004, 24” TBGpads, JRB coupler, plumbed, 8’6” width, nice,work ready . . . . . . . . . . . . . . . . . . . . . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’boom, 11’ stick, 5.12 cy bkt, 22,000# ctwt,hammer/shear plumbing very good condition . . . . . . . . . . . . . . . . . . . . . . . . . . .$159,000
(2) 48' Box Vans w/Liftgates, GoodCondition . . . . . . . . . . . . . . . . . . . . . . .CALL
IR 185’s, JD diesels . . . . . . . . . . . . . .CALL
Vermeer 5800 Trencher, 1997, 4 cyl dsl eng . . . . . . . . . . . . . . . . . . . . . . . . . . . .$11,900(12) Allmand Light Plants, 2008-2010,diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . . . . . . . . . . . . . . . . . .From $5,200IAmerican Augers 16" Boring Machine, 10HP gas, 35,000# thrust, 30' track . .$7,500
Case 580L Rubber Tire Loader Backhoe,1997, OROPS, std stick, 24" bkt . . .$24,500Volvo BL60, 2006, 4x4, EROPS, ext hoe, auxhyd . . . . . . . . . . . . . . . . . . . . . . . . .$32,500
Read RD90B screening plant, 1994, Listerdiesel, dual tires on axle, hyd extensions,good condition, work ready . . . . . .$32,500Viper 301 Portable Screening Plant, 1997,dsl, 5'x7'. side & rear conveyors, T/A carrier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
John Henry Drill Mtd on Cat 320N, 1994, 24'mast, Duraquip dust collection . . .$150,000
(2) Balderson Broom Attachment for Cat ITMachines, 8' wide, good condition . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000 Ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . .$9,500Over 100 Excavator, Loader, Specialized &
Grapple Buckets in Stock-Call For Your Needs
FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pal-let style, excellent . . . . . . . . . . . . . . .$4,000(5) Cat 936/926/950 pallet forks, for aBalderson quick coupler, exc. cond . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . .$3,500 Ea.
Others Available CallPrices Are Negotiable - At Your
Inspection
All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CRAWLER LOADERS
OFF ROAD HAULERS
MOTOR SCRAPERS
DRILLS
ATTACHMENTS
MISCELLANEOUS
WHEEL LOADERS
CRUSHING & CONVEYING
HYDRAULIC EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
LANDSCAPINGCRANES
SPECIALS
BACKHOES
AIR COMPRESSORS
Page 10 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industy acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
CONTACT: JEFFREY McCLAIN O: 636-931-4044 C: [email protected]
YEAR MAKE MODEL SERIAL NUMBER HOURS PRICE1994 Caterpillar 963LGP 21Z05143 1754 $17,500 1194 Caterpillar 973LGP 86G01579 9245 $21,600 1977 Caterpillar G12 61M04713 237 $48,000 1994 Caterpillar 330L 5YM00344 14784 $38,700 1994 Terex 2766B A4731230 7100 $19,600 1994 Terex 2766B A4731242 7000 $19,600 1986 Grove RT-522 CRANE 68546 9651 $59,000 1991 Grove RT-875 75915 18,860 $189,000 1990 Gardner Denver SCH2500 RD 2711479 0 $28,700 1988 Vemeer T-850 TRENCHER 148 1895 $59,900
EQUIPMENT FOR SALE
Phone: 502-493-4380Fax: 502-499-3180
www.brandeismachinery.com
Used Equipment
Please call or check out our Web site for
our Certified Rental Fleet Reduction Sale!
1995 Cat 775B, 25,000 Hrs, #BTL1601..............................................$145,000
2006 Komatsu D39EX-21A Dozer, w/EROPS/AC, 2000 Hrs, 6-Way Blade,Sweeps & Screen, #BCC1902..........$47,000
1999 Komatsu D65EX-12 Dozer, w/EROPS,Semi U Blade, Sweeps & Rear Screen,#BTE1001 ........................................$42,700
2005 Komatsu PC200LC7 Excavator, w/Cab,Std Arm, 48” ESCO Bkt, #BTP1903 $84,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 11
Contact Marty in Illinois1-800-307-0221
Photos & Detail Descriptions view: www.finkbinerequipment.com
GRADALL XL4100 - ‘00 • truck mtd excavator with 5375 original hours,
good condition w/72” Ditching bucket ............................................$39,500
CEDAR RAPIDS CR362L - ‘08 • Electric 8-16’ screed, Top Con Syst V,
approx 1360 hrs ............................................................................$201,500
MIDLAND MODELS SPD-8 AND SPR-6 - ‘11 • low hour rental units..$POR
CALL items may be on rent causing pricing and hours to vary.
TEREX PR165 - ‘09 • 4 wheel, front loading, w/24” cutter, 282 hrs ............
......................................................................................................$189,000
SAKAI CR270 - 36", 3000lb, 4000VPM, vibratory, 200 hrs ............$13,500
SAKAI SW300-1 - ‘09 • 39.2" Dbl Drum vib, “on rent”........................$POR
SAKAI SW652 - ‘10 • 58” Vib, remaining std warranty and EPTW, 125 hrs
........................................................................................................$79,500
SAKAI SW880 - ‘10 • 79” Vib, remaining std warranty and EPTW, “on
rent” ....................................................................................................$POR
SAKAI SW800II - ‘09 • 67” Dbl Drm Vib, w/balance of EPTW, 595 hrs........
........................................................................................................$79,500
SAKAI SW850-2 - ‘10 • 79” Dbl Drm Vib w/balance of Std warranty and
EPTW, 400 hrs ................................................................................$94,500
MILLING MACHINES
ROLLERS
PAVERS / ROAD WIDENERS
EXCAVATORS
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
View us at:www.amstate.com
YOUR AUTHORIZED DEALER
in WISCONSIN and UPPER MICHIGAN for:
For information on our in-stock equipment, contact Lanny Peterson at:[email protected] or
mobile 1-715-574-8089 or 1-800-242-7113
AGGREGATE EQUIPMENTSIMPLICITY portable dual screen plant, 6x16 and 6x20triple deck horizontal screens, 60" underscreen convey-ors, 42" cross conveyors, tri-axle chassis with hydraulicleveling......................................................................CALLCEDARAPIDS 4136 Portable twin roll plant, with Allis5'x16' single deck horizontal screen, Cummins V-12diesel, on tandem axle chassis with hydraulic leveling......................................................................$68,000ALLIS H400-SD portable cone plant, Cummins diesel,rear feed conveyor, side discharge conveyor, tandemaxle chassis with run-on hydraulic jacks ............CALL
EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat3408 Diesel, with a 24’7” Gooseneck Boom, and a10’8” Stick with 43’6” Reach and 25’ Digging Depth,7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb.Working Weight, 5800 Frame Hours and RecentEngine Rebuild ............................................$125,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVA-TOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cuyd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Padsadn Removable Sideframes, Approx. 190,000 Lb.Working Weight..................................................CALLLIEBHERR R954C HD “LITRONIC” CRAWLER EXCA-VATOR, (Several 2006-2007 Models Available) withVarious Boom/Stick Combinations and BucketsAvailable, 326HP Liebherr D936L Six-Cyl. Tier 3Diesels, Hydraulically Removable Counterweights,124,000 to 130,000 Lb. Working Weights..........CALL
CRANESAMERICAN 5300 70 TON CAPACITY CRAWLERCRANE, Powered by a GM 6-71 Diesel with 3 StageTorque Converter, 140’ of 46HR Angle Boom, 40’ Jib,Third Drum, Extendible Crawler Base with 32” CrawlerShoes, 40,000 Lb. Counterweight ..............$149,500
KOBELCO CK800 80 TON CAPACITY CRAWLERCRANE, 1996, with 140’ Main Boom, 30’ Jib, TwoMain Hoist Drums Plus an Auxiliary Third Drum,Hydraulically Extended Undercarriage with 36” TrackPads ..................................................................CALLGROVE RT760 60 TON CAPACITY ROUGH TERRAINCRANE, 1993, with Cat Diesel, 110’ Power-PinnedBoom, 32’ to 56’ Telescopic Offsettable Swingaway,Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work................................................Reduced to $179,900GROVE RT760E 60 TON CAPACITY ROUGH TERRAINCRANE, 2008, (Several Available) with CumminsDiesels, 36’ to 110’ Booms, 33’ to 56’ Offsettable Bi-Fold Swingaway Extensions, Model HO30 Main &Auxiliary Hoists, 29.5x25 Tires, block & ball ......CALLGROVE RT875E 75 TON ROUGH TERRAIN CRANE,2006, 41’ to 128’ boom, 33’ to 56’ bi-fold swingaway,Model 30 main & auxiliary hoists, 29.5 x 25 tires, 3-position outriggers ............................................CALL
GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS
• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/
JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES
AMERICAN 5300 CRAWLER CRANE GROVE RT875E
Large Selection of New & Used Equipment in Stock.
Page 12 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
see WACKER page 64
McCann Industries Delivers for Wacker Drive Workers
An aerial overview of the construction at the CongressStreet interchange.
This Case 621 wheel loader from McCann Industriesfound plenty of work on the Wacker Drive project.
Demolition occurs in front of the Civic Opera House.
McCann Industries’ Rich Hoffmayer (L) and MarioSilva grill burgers and brats to feed several hundredtradesmen working on the Wacker Drive project.
Grade beam demolition is done between Randolph andWashington streets.
Crews place concrete at the Randolph intersection.
James McHugh Construction Co. Superintendent RichPhelan (L) thanks McCann Industries Vice President ofSales & Marketing Jim McCann for feeding the workerson the Wacker Drive job site. In the midst of one of the most ambitious projects Chicago
has ever seen, McCann Industries provided a much-deserved break for all involved. On Oct. 7 McCann
Industries held a cookout and fed hundreds of tradesmenfrom the James McHugh Construction Co., the general con-tractor for the Wacker Drive rebuild project.The city of Chicago is rebuilding the North-South leg of
Wacker Drive from Randolph to Congress Street. ReviveWacker Drive: Part 2 will modernize the upper and lowerlevels of Wacker Drive by creating safer, more efficient road-ways for motorists and pedestrians. A new interchange atCongress also will be built, complete with safer exit andentrance ramps and a spacious, three-acre park.The James McHugh Construction Co. began on the proj-
ect in June of 2010 and is scheduled for completion inDecember of next year. While McCann Industries recog-nized the strong effort by the James McHugh ConstructionCo. in making the Wacker Drive project a success, the com-pany also acknowledged the great support the project hasreceived from Mar-Mac Wire, who manufactures carbonsteel wire and wire products for the construction and OEMindustries.The James McHugh Construction Co. is a Chicago-based
construction company that was founded in 1897 and hasbeen involved with the construction of some of the most rec-ognized properties in the Chicago Skyline.
Page 14 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contact Southeastern Equipment to Check Out the New Models of Case Construction Equipment
Cambridge, OH Monroe, OH Heath, OH Burlington, KY 740-432-6303 513-539-9214 740-522-3500 859-586-6133
North Canton, OH Mentor, OH Mansfield, OH Novi, MI 330-494-3950 440-255-6300 419-529-4848 248-349-9922
Gallipolis, OH Perrysburg, OH Marietta, OH Holt, MI 740-446-3910 419-874-0331 740-374-7479 517-694-0472
Dublin, OH Brunswick, OH Brilliant, OH 614-889-1073 330-225-6511 740-598-3400
New “N” Series Backhoes
Schwarze Street Sweepers
New CX55B Compact Excavator
Schwarze Asphalt Patchers
New “Alpha” Series Skid SteersNew “F” Series Wheel Loaders
Other Equipment Available Through Southeastern Equipment
www.southeasternequip.comCarlton Wood Chippers
Etnyre Distributors &Chip Spreaders
New “C” Series Excavators
Bomag Recyclers / Stabilizers
Terex Roadbuilding Pavers Vacall Sewer Equipment Eagle Crusher Plants
HCEA Announces Two Firms Join as Corporate MembersThe Historical Construction Equipment
Association (HCEA), a 501(c)3 non-profitorganization dedicated to preserving the his-tory of the construction, dredging and sur-face mining equipment industries,announced that Taylor Machine Works andVolvo Construction Equipment have joinedthe HCEA as corporate members. Taylor Machine Works Inc., located in
Louisville, Miss., is possibly the only pri-vately held industrial lift truckmanufacturer operating inAmerica today. Founded by W.A. Taylor Sr. in 1927 as a smallfamily-owned automotive andrepair business, Taylor is nowunder the leadership of the thirdgeneration of the Taylor family,and its “Big Red” forklifts havemade an impressive impact inthe materials handling equip-ment industry worldwide. TheAmerican Heritage “Big Red”Fire Museum also is inLouisville; founded in 1989 byW. A. Taylor Jr., it houses morethan 100 vehicles and exhibits asold as the late 1700s.
Volvo Construction Equipment is oneof the world’s oldest industrial firmsengaged in construction equipment man-ufacturing, tracing its roots to a machineshop founded in Eskilstuna, Sweden, byJohan Thefron Munktell in 1832. Today,it has plants in Sweden, Germany,France, Poland, the United States,Mexico, Brazil, Korea, China and India,and its products and services are offered
in more than 125 countries through pro-prietary or independent dealerships.Volvo also has acquired a number ofother historic firms, including theMichigan product line from Clark,Champion motorgraders, Akkermanexcavators, Blaw-Knox pavingmachines and Samsung excavators. The National Construction
Equipment Museum, operatedby the HCEA in Bowling Green,Ohio, has two Michigan wheelloaders including the first oneproduced, and an MRS150AGT wheel tractor in its col-lection, and its Archives housesubstantial collections of recordsfrom both companies. VolvoConstruction Equipment donat-ed one of the loaders and a size-able volume of archival recordsdirectly to the HCEA. Corporate members designate
up to five of their officers andemployees to receive theHCEA’s quarterly magazine,Equipment Echoes, and VIPpasses to its annual InternationalConvention and Old Equipment
Exposition, to be held at its Bowling Green,Ohio, headquarters Sept. 14 through 16,2012. They also receive links on the HCEA’sWeb site at www.hcea.net and are publicizedin Equipment Echoes and in press releases totrade publications and Web sites.For more information, call 419/352-5616
or visit www.hcea.net.
The National Construction Equipment Museumalso owns this circa 1950 M. R. S. 150AGT wheeltractor.
The first Michigan wheel loader, this model 75A, wasdonated to the National Construction EquipmentMuseum in the late 1990s.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 15
Dave Modglin636-680-1588
1 Fabick Drive, Fenton, MO 63026www.fabickcat.com
“To Ever Serve Our Customers Better”
USED EQUIPMENT1974 CMI SUBURBAN 56-120
Slipform paver, 12’-24’, CAT 3306 Engine,Float Pan, Hyd. Vibrators, Auto Float......................................................................$34,000
1993 BLAW KNOX PF400A
3845 Hrs, OMNI-1A Screed, John DeereEngine, Diesel Heat, Truck Hitch, DualControls ..........................................$21,000
2007 CAT 924G
s/n RTA00851, cab, a/c, 2.3yd bucket, Tierll engine ........................................$115,000
2006 CAT D6R DS XL
S/N GJB00513, 3000 Hrs, Cab, A/C, SUBlade, Ripper Hydraulics ............$205,000
2005 CAT 385C
s/n EDA00220, 4159 Hrs, GP Boom, 14’5”Stick, CWT Removal Devise, 84” Bkt HBLinkage ........................................$566,000
2008 CAT 953D
1049 Hrs, Cab, A/C, Joystick Control,2.25cyd Bkt, Ripper......................$160,000
2005 CAT D6R
s/n AFM00164, 5287 Hrs, Cab, A/C, SUBlade ............................................$135,000
2007 CAT 365C
4438 Hrs, 25’ Boom, 13’7” Stick,Counterweight Removal Devide, 60” Bkt......................................................$335,000
2006 BOBCAT S160
1473 Hrs, 80% Tires, Extra Duty Tread,72” Grapple Bkt ..............................$18,000
1994 CAT 5130
Front Shovel, Idled 2009, ComponentRebuild History Available............$325,000
1996 GOMACO GT3600
1515 hours, Molds available ........$60,000
2008 CAT 908H
s/n MXF00268, 626 hours, cab, a/c, 1.4ydgp bucket, forks ............................$91,500
2005 CAT 950Gll
5700 hours, A/C, 3.75 yd Bucket, JoystickControl, Ride Control ..................$145,000
2007 CAT D5G XL
s/n WGB03871, 1461 Hrs, OROPS, Heater,Lights ..............................................$64,500
2010 MORBARK 4600XL
400 Hrs, Cat C27 Engine, Auto ReversingFan, Magnetic End Pully..............$575,000
2008 BOBCAT 435G
1001 Hrs, 12 & 24” Bkt, 950 Breaker ................................................................$40,000
Page 16 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
12475 Plaza Drive, Eden Prairie, MN 55344
www.suburbanchev.com*All Sale Prices Include Manufacturer Rebate & Commercial Rebate For Qualified Commercial Customers To Dealer, Not Including Tax Or License.”
866-849-6234
10’ Service Van $32,995 15’ Cube Van $29,995 Aluminum Utility Van $33,995 Plow Truck $32,995
Work Van $21,995 4x2 Service Body $28,995 9’ Crew Dump $39,995 12’ Cube Van $28,995
4x2 Ext Service Body $31,995 4x4 8’ Flatbed $30,995 Diesel Flatbed $38,995 11’ Dump $37,995
4x4 Service Body $32,995 Hot Shot Food Delivery $34,995 4x4 Red Service Body $32,995 Utility Van $32,995
12’ Dually Cube $31,995 Aluminum Service Body $30,995 Ext. Red Service Body $34,995 ‘09 12’ Cube Van, 83K Miles$16,985
Page 18 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
AIS Construction Equipment Corp.www.aisequip.comMIGrand Rapids616-538-2400Lansing517-321-8000Northeast Detroit - Lenox586-727-7502Saginaw - Bridgeport989-777-0090Traverse City - Williamsburg231-267-5060
Berry Tractor & Equipmentwww.berrytractor.comKSGarden City800-475-2290Kansas City913-829-4600Topeka800-864-4509Wichita800-283-4246MOSpringfield800-864-7995
Brandeis Machinery & Supply Companywww.brandeismachinery.comINEvansville812-425-4491Ft. Wayne260-489-4551Indianapolis317-872-8410South Bend574-233-8770KYCorbin606-528-3700Lexington859-259-3456Louisville502-491-4000Paducah270-444-8390Stanville606-478-9201
Columbus Equipmentwww.columbusequipment.comOHCadiz740-942-8871Canton330-453-4521Cincinnati513-771-3922Columbus614-443-6541Dayton937-879-3154Painesville440-352-0452Perrysburg419-872-7101Piketon740-289-3757Richfield330-659-6681
Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CAREcontact your Komatsu distributor or scanthis QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY TIER 4 INTERIM EQUIPMENT WITH COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
MIDWEST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
Custom Made Products Co.Humboldt, IA
(800) 760-7871 Call Anytime70 to 80 Scrapers on Hand at 8 Locations
FOR SALE OR FOR RENTIowa Locations: Humboldt, Huxley, De Soto, Iowa Falls, Union, Manchester, Dunlap Nebraska Location: Tecumseh
www.gncmp.com
GRADERSArt’s-Way Graders, (New & Used) ................................................CallJohnson Graders (New & Used)....................................................CallAll sizes available for either Manufacturer
ASHLAND18yd Ashland I-180 TS2s, (New & Used) ....................................Call17 1/2yd Ashland I-175 XL2, (New & Used) ................................Call15 1/2yd Ashland I-155 TS2s, (New & Used) ..............................Call15 1/2yd Ashland I-155 XL2s, (New & Used) ..............................Call13yd Ashland I-130 TS2s, (New & Used) ....................................Call13yd Ashland I-130 XL2s, (New & Used) ....................................Call11yd Ashland I-110 TS2s, (New & Used) ....................................Call11yd Ashland I-110 XL2s, (New & Used) ....................................Call9yd Ashland I-900’s & I-950’s, (New & Used)..............................CallAshland Groundhog GH2500, (New & Used) ................................Call
GARFIELD12yd Garfield Model 1150s, (New & Used)..................................Call8yd Garfield Model 850s, (New & Used)......................................Call5yd Garfield Model 550s, (New & Used)......................................Call
BIG DOG8yd Big Dogs, (New & Used) ........................................................Call
6 1/2yd Big Dogs, (New & Used) ..................................................Call
5yd Big Dogs, (New & Used) ........................................................Call
12’ Feedlot Box Scrapers..............................................................Call
10’ Feedlot Box Scrapers..............................................................Call
12’ Box Scrapers ..........................................................................Call
10’ Box Scrapers ..........................................................................Call
NEW & USED ROWSE7yd Rowse Model 7002 & 7004....................................................Call
5yd Rowse Model 7002 & 7004....................................................Call
3yd Rowse Model 3002 ................................................................Call
MISCELLANEOUS1 1/2yd & 3yd Durabilts Model DP60 & DP84, (New & Used) ....Call
3/4 yd G&A Mini Scraper, (New & Used)......................................Call
8’ Hoelscher PT-8 Lawn Roller, (New) ........................................Call
4’ Dura Grade Model DG4E Electric Lift, (New) ..........................Call
18yd AshlandI-180 TS2s(New & Used)Call
11yd Ashland I-110 XL2s(New & Used)Call
We Will Not Be Undersold!
FreeDelivery!
www.smallstep.gov
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 19
From Komatsu - The Excavator Experts
Efficient Komatsu Tier 4 Interim engines and advanced hydraulic system maximize productivity while providing up to 10% lower fuel consumptionEnhanced operator environment improves comfort and machine controlKomatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.
Komatsu Dash 10 excavators provide increased horsepower, improved operator comfort and reduced fuel consumption. The excavator experts at Komatsu can help you complete jobs more quickly, while lowering your fuel and maintenance costs.
DASH 10 EXCAVATORS
www.komatsuamerica.com
.komatsuamerica.comwww
.komatsuamerica.com
Diesel Machinery, Inc.www.dieselmachinery.comSDAberdeen605-725-4364 • 888-762-6312Rapid City605-348-7438 • 800-658-3047Sioux Falls605-336-0411 • 800-456-4005
General Equipment & Supplieswww.genequip.comNDBismark800-279-4437Fargo800-437-2924Minot800-825-0479
Road Builders Machinery & Supply Co., Inc.www.roadbuildersmachinery.comKSKansas City913-371-3822NEGrand Island308-384-2620Lincoln402-325-0447Omaha402-331-9200
Road Machinery & SuppliesCompanywww.rmsequipment.comIACedar Rapids319-363-9655 • 800-616-6615Des Moines218-741-9011 • 800-555-1455Sioux City712-252-0538 • 800-633-9104ILMilan309-787-1742 • 800-633-9114MNDuluth218-727-8671 • 800-888-9535Savage952-895-9595 • 800-888-9515Virginia218-741-9011 • 800-752-4304
Roland Machinery Co.www.rolandmachinery.comILBolingbrook630-739-7474 • 800-826-9608Carterville618-985-3399 • 800-274-7202Marengo815-923-4966 • 800-765-2635Springfield217-789-7711 • 800-252-2926INPortage219-764-8080 • 888-764-8226MIEscanaba906-786-6920MOBridgeton314-291-1330 • 800-274-7230Cape Girardeau573-334-5252 • 800-274-7210Columbia573-814-0083 • 800-274-7212Palmyra573-769-2056 • 800-274-7214WIDeForest608-842-4151DePere920-532-0165Eau Claire715-874-5400Franksville262-835-2710Schofield715-355-9898
T M
H
.komatsuamerica.com/komatsu-carwww
e .komatsuamerica.com/komatsu-car
Page 20 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2007 Komatsu D65EX-15; #81435, Cab/AC,Sweeps, Rear & Side Screens, 1700 Hrs........................................................................$179,500
2003 Komatsu WA180-3; #91531, Cab/AC, JRBQC, 17.5-25 Tires, 8700 Hrs ................$39,500
2007 Komatsu PC300LC-8; #81387, Cab/AC, 13’ Arm, 33.5” Tracks, 1500 Hrs ........$189,500
2000 Komatsu D61EX-12; #81476, Cab/AC,PAT Blade, 5475 Hrs ............................$59,500
2006 Komatsu PC220LC-8; #81393, Cab/AC,Hyd Thumb, 4100 Hrs ........................$119,500
2004 Ingersoll-Rand SD45D; #80792, OROPS,54” Smooth Drum, 800 Hrs ..................$46,500
2006 Komatsu PC400LC-7EO; #81398, 13’Arm, 35.5” Shoes, JRB QC, HKX Kit, 5100 Hrs ..............................................................$189,500
1999 Komatsu WA120-3; #81405, Cab/AC,QC/Bkt/Forks, 6875 Hrs ........................$49,500
2007 Komatsu WA250-5; #81402, Cab/AC,QC/3 Yd Bkt, 3rd Valve, 3100 Hrs ......$109,500
2003 Komatsu D65PX-15; #80775, Cab/AC,36” Shoes, Drawbar, 5400 Hrs............$129,500
2005 Komatsu PC228USLC-3; #81385, Cab/AC,Aux Hyd, 2475 Hrs..............................$129,500
2002 Komatsu CD60R-1; #81226, RoadlinerTracks, 2600 Hrs ..................................$79,500
Call Doug / Sam:(866) 485-7180
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 21
2005 VOLVO EC210B LC, Stk #: UEF097;3,817 Hours; A/C, Radio, 32" Pads, 9'6" Stick,Aux Hyd, Q/C Piping, Rotator Piping, PilotPattern Control Change......................$84,0002003 VOLVO EC210B LC, S/N: 843; 8,356Hours; A/C, Radio, 32" Pads, 9'6" Stick, AuxHyd, Geith Pin Grabber, 48" Bucket ..........Call 2004 VOLVO EC360B LC, Stk #: UBF800;4,702 Hours; A/C, 36" pds, 12'10" stck, Auxhyd, Q/C piping, Pilot pat cntrl ................Call 2003 VOLVO EC360B LC, Stk #: UJJ616;5,509 Hours; 12' 10"' ARM; AC; RADIO; 36"PADS; 70% UC; 54" P/O BUCKET; PILOT PAT-TERN CONTROL CHANGE ........................Call 2003 VOLVO EC460B LC, Stk #: UJGF433;3,472 Hours; A/C, Radio, 36" Pads, 15'9"Stick, Pilot Pattern Control Change, Aux Hyd,66" Bucket........................................$179,500
VOLVO 320 KW, S/N: 2012638315; 320 KW ..................................................................Call
2006 VOLVO 500 KW, For Sale or Rent. CallDenny or Brek for price & details. Skid Unit ..................................................................Call
2006 VOLVO 500 KW, S/N: 021732; 7,588Hours; Volvo 500 kw in a trailer ..............Call 2005 VOLVO 500 KW, S/N: 021732; For Saleor Rent. Call Denny or Brek for price &details. Skid Unit ......................................Call
2007 VOLVO A40D, S/N: 13747; 3,210 Hours;A/C, CONTRONICS, 29.5R25 TIRES, TEFLONLINERS ............................................$339,000
1996 VOLVO A25C, S/N: 60795; 10,500Hours; A/C, CONTRONICS, 23.5-25 TIRES ..............................................................$89,000 1996 VOLVO A25C, S/N: 60790; 10,500Hours; A/C, CONTRONICS, 23.5-25 TIRES ..............................................................$89,000 1993 VOLVO A25C, S/N: 8072; 12,000 Hours;HEATER. 23R25 TIRES 10%, BODY HEAT,6X6 ....................................................$59,0002007 VOLVO A40D, S/N: 13874; 3,491 Hours;A/C, CONTRONICS, 29.5R25 TIRES, TEFLONLINERS ............................................$339,0002006 VOLVO A40D, S/N: 13033; 4,488 Hours........................................................$279,0002006 VOLVO A40D, S/N: 13152; 4,441 Hours........................................................$279,0002005 VOLVO A40D, S/N: 12171; 3,753 Hours;A/C, CONTRNICS, 29.5R25 TIRES, TAILGATE........................................................$275,000 2005 VOLVO A40D, S/N: 70051; 6,311 Hours;A/C, CONTRONICS, 29.5R25 TIRES, TAIL-GATE, BODY HEAT ..........................$259,000 2005 VOLVO A40D, S/N: 12173; 5,312 Hours;AC, CONTRONICS, 29.5R25 TIRES, TAILGATE........................................................$259,0002004 VOLVO A40D, S/N: 11341; 3,433 Hours;AC, CONTRONICS, 29.5-25 TIRES (90%),TAILGATE ........................................$285,000 2004 VOLVO A40D, S/N: 11223; 4,790 Hours;A/C, Contronics, 29.5R25 Tires ......$275,000 2004 VOLVO A40D, S/N: 11026; 4,254 Hours;A/C, CONTRNICS, 29.5R25 TIRES ..$269,000 2003 VOLVO A40D, S/N: 10772; 5,834 Hours;A/C, CONTRONICS, 29.5R25 TIRES........................................................................$265,000 2003 VOLVO A40D, S/N: 10826; 7,321 Hours;A/C, CONTRNICS, 29.5R25 TIRES ..$199,000
2002 VOLVO A40D, S/N: 60169; 7,465 Hours;A/C, CONTRONICS, 29.5R25 TIRES........................................................................$195,0002002 VOLVO A40D, S/N: 60138; 8,291 Hours;A/C, CONTRONICS, 29.5R25 TIRES, TAIL-GATE ................................................$185,0002001 VOLVO A40D, S/N: 60060; 8,180 Hours;A/C, CONTRONICS, 29.5R25 TIRES........................................................................$195,000 2001 VOLVO A40D, S/N: 60058; 8,236 Hours;A/C, CONTRNICS, 29.5R25 TIRES ..$169,000 2000 VOLVO A40D, S/N: 10090; 8,801 Hours;A/C, CONTRONICS, 29.5R25 TIRES........................................................................$169,000
2004 VOLVO L60E, Stk #: UDA367; 5,259Hours; Cab, A/C, Hyd Attachment Bracket,20.5R25 Tires, 2.2CY Bucket w/BOE ........................................................................$84,500 2004 VOLVO L60E, Stk #: UDH430; 7,451Hours; Cab, A/C, Hyd Attachment Bracket,New 20.5R25 Tires, 2.2CY Bucket w/BOE ................................................................$84,500 2002 VOLVO L70D, Stk #: UDG937; 1,907Hours; Cab, Contronics, Boom Susp, HydAttachment Bracket, Limited Slip Diff, 2.5cyBucket, 20.5-25 Tires ........................$89,500 2002 VOLVO L70D, Stk #: UFF989; 10,497Hours; Cab, A/C, Hyd Attachment Bracket,20.5-25 Tires, 2.5CY Bucket w/BOE..........................................................................$67,500 2005 VOLVO L70E, Stk #: UBG916; 2,320Hours; Cab, A/C, Hyd Attachment Bracket,20.5R25 Tires, 2.5CY Bucket w/BOE ........................................................................$99,000
2005 VOLVO L70E, Stk #: UDI638; 6,271Hours; Cab, A/C, Hyd Attachment Bracket,20.5R25 Tires, 2.5CY Bucket w/BOE ........................................................................$87,500 2004 VOLVO L70E, Stk #: UFI340; 9,961Hours; Cab, A/C, Contronics, HydraulicAttachment Bracket, Front Diff Lock, 2.9cyBucket, 20.5R25 Tires ......................$73,500 2003 VOLVO L90E, Stk #: UBA183; 8,136Hours; Cab, A/C, Hyd Attachment Bracket,20.5R25 Tires, 3.5CY Bucket w/BOE ........................................................................$99,0002005 VOLVO L110E, Stk #: UJJI424; 3,540Hours; Cab, A/C, Hyd Attachment Bracket,23.5R25 Tires, 4.1CY Bucket w/BOE$127,5002010 VOLVO L110F, 447 Hours; Cab, A/C,Radio w/CD, Boom Susp, 3rd Function, BlockHeater, 4.4cy Bucket, 23.5R25 Tires ......................................................................$212,5002005 VOLVO L220E, Stk #: UBF297; 16,656Hours; Cab, A/C, Radio, Return to Dig, BoomSusp, 7cy Bucket w/BOE, 29.5R25 Tires,Recent Transmission ......................$109,0001999 VOLVO L330C, S/N: 60392; 22,268Hours; Cab, A/C, Contronics, Boom Susp,CDC, 9CY Spade Nose Bucket w/Teeth,35/65R33 Tires ........................................Call1996 VOLVO L330C, S/N: 60125; 22,031Hours; Cab, A/C, Contronics, Boom Susp,9CY Spade Nose Bucket w/Teeth, 35/65R33Tires..........................................................Call 2001 VOLVO L330D, S/N: 61108; 11,000Hours; Cab, A/C, Contronics, Boom Susp,CDC, 9CY Spade Nose Bucket w/Teeth,35/65R33 Tires ........................................Call
EXCAVATORS
GENERATOR SETS
OFF HIGHWAY TRUCKS
WHEEL LOADERS
(262) 781-3770
SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive
Butler, WI 53007
Jim KingMobile: (414) 530-0592
Fax: (262) 781-5053Email: [email protected]
WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.
2005 VOLVO EC210B LC, Stk #:UEF097; 3,817 Hrs; A/C, Radio, 32" Pads,9'6" Stick, Aux Hyd, Q/C Piping, RotatorPiping, Pilot Pattern Cntl Change$84,000
2001 VOLVO L330D, S/N: 61108;11,000 Hours; Cab, A/C, Contronics,Boom Susp, CDC, 9CY Spade Nose Bucketw/Teeth, 35/65R33 Tires ..................Call
2004 VOLVO L60E, Stk #: UDA367;5,259 Hours; Cab, A/C, Hyd AttachmentBracket, 20.5R25 Tires, 2.2CY Bucketw/BOE ..................................$84,500
2007 VOLVO A40D, S/N: 13747;3,210 Hours; A/C, CONTRONICS,29.5R25 TIRES, TEFLON LINERS ......................................................$339,000
Page 22 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
see RODEO page 34
Bale Equipment Solutions Holds Case Triple Threat Rodeo
Shannon Climer of Murtco Inc., Paducah, Ky., takes part in the competition withthis Case SR200 skid steer.
Bryan Zirkle of Pioneer Electric, based in Piqua, Ohio, keeps his cool on this Case 580 Super N backhoe.
James St. John of Central Iowa Water Association takes a Case 221E Series 3 loaderthrough the course.
(L-R): Bale’s Glen Gish is joined by Case Construction Equipment’s Ion Warner, Sheri Talley and DonMiller of Bales and Case Construction Equipment’s Curtis Goettel to keep things running smoothly at therodeo.
Bale Equipment Solutions, Case Construction Equipment’snewest dealer serving central Kentucky and southern Indiana,made a big splash at the ICUEE trade show by holding a Case
Triple Threat Rodeo Oct. 4 to 6.While the event helped introduce Bale Equipment Solutions as a
local Case dealer, the rodeo also proved to be a big draw for CaseEquipment Company. Along with many local contractors, equipmentoperators from around the country stopped by to compete in theevent. Case’s Triple Threat Rodeo consists of three events, which use the
Case N Series loader/backhoe, the F Series wheel loader and theAlpha Series skid steer:• Backhoe Bronc Buster — the backhoe is used in a series of obsta-
cles, which includes the use of soccer and tennis balls. • Wheel Loader Roundup — contestants use a wheel loader to pick
up various transport bars off their bases and carry/move to other areasacross the event space. • Skid Steer Showdown — a bar is attached to the bucket and the
contestant must carry two soccer balls (and one floating soccer ballinside of bucket) while maneuvering around cones and through F-assemblies to the final destination, without dropping the soccer balls.The winner for the Bale Equipment Solutions’ event was Rick
Greeno of Kenosha, Wis.Case Dealers from around the United States and Canada have been
holding Case Triple Threat Rodeo competitions in search of the mosthighly skilled equipment operators to compete in the North AmericanChampionship. The Championship is scheduled to be held at theWorld of Concrete in Las Vegas in January 2012.Winning competitors from each local event are awarded a trip for
two to Las Vegas, $500 and a commemorative Triple Threat Rodeobelt buckle. At each Case Triple Threat Rodeo event, money also is being
raised for Habitat for Humanity. Bale Equipment Solutions eventraised $500 to contribute to the charity. Bale Equipment Solutions, established in 2004 as Bale Equipment
Rentals & Sales, is a full-line construction equipment dealership pro-viding new and used construction and heavy equipment sales, rentals,parts and service in the Louisville, Ky., metropolitan area and sur-rounding counties.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 25
www.westsidetractorsales.com 888-504-0231 Naperville, IL
West Side Tractor Sales Co.
Page 26 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Allis-Chalmers HD21 Dozer/Ripper, 1:50 Scale ............$75Allis-Chalmers HD-41 Dozer, 1:25 Scale......................$200Allis-Chalmers 45 Motor Grader, 1:50 Scale ..............$100Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$70Bantam C-35 Crawler Shovel, 1:50 Scale ......................$70Bantam Truck Mounted Shovel or Backhoe; 1:50 Scale ....
..........................................................................................$95Bobcat A300 Wheel Loader, 1:25 Scale ........................$30Bobcat M400 Gold 50th Anniversary Skid Steer Loader,1:25 Scale ........................................................................$35Bobcat M610 Golden 50th Anniversary Skid SteerLoader ..............................................................................$45Bobcat M-743 Gold 50th Anniversary Skid Steer Loader,1:25 Scale ........................................................................$35Bobcat S175 Skid Steer Loader, 1:50 Scale..................$25Bobcat S175 Skid Steer Loader, 1:25 Scale..................$40Bobcat S205 Skid Steer Loader & Pick-Up Truck/TrailerSet, 1:50 Scale..................................................................$65Bobcat 773 50th Anniversary Skid Steer Loader, 1:25
Scale ................................................................................$50Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ........$35Bobcat Tractor/Trailer Set, 1:50 Scale ..........................$90Case Conrad 580 Super R Backhoe, 1:50 Scale ........$175Case CX210B Excavator, 1:50 Scale..............................$40Case 330B Articulated Truck, 1:50 Scale ......................$35Case 580Super N Backhoe/Loader, 1:50 Scale ............$45Case 621E Wheel Loader, 1:50 Scale ............................$35Case 1850K Dozer, 1:50 Scale ........................................$40Caterpillar 4-Piece Earthmover Set, 1:64 Scale ............$90Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale ..
..........................................................................................$65Caterpillar AP655D Paver, 1:50 Scale ............................$65Caterpillar CB-534D XW Asphalt Compactor, 1:50 Scale ..
..........................................................................................$50Caterpillar CT660 Dump Truck, 1:50 Scale....................$80Caterpillar CT660 Tractor Trailer, 1:50 Scale ................$90Caterpillar D6K XL Track Type Tractor, 1:50 Scale ......$65Caterpillar D6T XW Track-Type Tractor ........................$70Caterpillar D8R Track Type Tractor, 1:50 Scale ............$55Caterpillar D10T Track Type Tractor, 1:50 Scale ..........$85
Caterpillar D11R Track Type Tractor, 1:50 Scale ..........$85Caterpillar D11T Track Type Tractor, 1:50 Scale ..........$90Caterpillar 24H Motor Grader, 1:50 Scale ......................$90Caterpillar 14M Motor Grader, 1:50 Scale......................$75Caterpillar 247B2 Multi-Terrain Loader, 1:32 Scale ......$35Caterpillar 297C Multi-Terrain Loader, 1:32 Scale ........$45Caterpillar 302.5 Mini-Excavator, 1:32 Scale ................$45Caterpillar 320D Excavator, 1:50 Scale..........................$65Caterpillar 365B Excavator, 1:50 Scale..........................$70Caterpillar 374D Excavator, 1:50 Scale ........................$110Caterpillar 432E Side Shift Backhoe Loader, 1:50 Scale ....
..........................................................................................$70Caterpillar 623G Elevating Motor Scraper, 1:50 Scale $40Caterpillar 725D Articulated Truck, 1:50 Scale ............$65Caterpillar 772 Off-Highway Truck, 1:50 Scale ............$75Caterpillar 785D Mining Truck, 1:50 Scale ..................$145Caterpillar 924 G Versalink Wheel Loader: 1:50 Scale $45Caterpillar 950H Wheel Loader, 1:50 Scale ..................$65Caterpillar 963D Track Loader, 1:50 Scale ....................$60Caterpillar 977 Traxcavator, 1:50 Scale ........................$50Caterpillar 988H Wheel Loader, 1:64 Scale ..................$35Caterpillar 992G Wheel Loader, 1:50 Scale ..................$80Dynapac CC232 Vibratory Compactor, 1:35 Scale ......$55Gradall XL4300II Excavator, 1:32 Scale ........................$80Grove GMK 4115L Truck Crane, 1:50 Scale ................$250International 175 Crawler Loader w/Multi-PurposeBucket, 1:50 Scale ..........................................................$65
International TD-15 Dozer, 1:87 Scale............................$45International TD-24 Ag/Crawler, 1:50 Scale ..................$40International TD-24 Military Dozer, 1:50 Scale ..............$50International TD-25 Dozer, 1:87 Scale............................$45International 350 Payhauler, 1:25 Scale ......................$285JCB 3CX Backhoe Loader, 1:50 Scale ..........................$55JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$85John Deere 400D Articulated Truck, 1:50 Scale ..........$45John Deere 624K Wheel Loader, 1:50 Scale ................$45John Deere 624K Military Wheel Loader, 1:50 Scale....$35John Deere 850J Crawler Dozer, 1:50 Scale ................$40John Deere 850K Dozer, 1:50 Scale ..............................$55Komatsu WA500-6 Wheel Loader, 1:50 Scale ..............$65Komatsu D51 EX Dozer, 1:50 Scale ..............................$65Komatsu D51 PX Dozer, 1:50 Scale ..............................$65Komatsu D375 Dozer, 1:50 Scale ..................................$90Komatsu GD655 Motor Grader, 1:50 Scale....................$65Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$75Komatsu Mack Granite MP w/Talbert Lowboy Trailer, 1:50
Scale ................................................................................$80Komatsu PC14R Mini-Excavator, 1:32 Scale ................$50Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$235Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$45Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$45Komatsu WA470 Wheel Loader, 1:50 Scale ..................$75LBX 210 X2 Excavator, 1:40 Scale ................................$75Link-Belt 3200 All Terrain Crane, 1:50 Scale ..............$195LeTourneau Super C Scraper w/Cab, 1:50 Scale..........$80LeTourneau Military Super C Scraper, 1:50 Scale ........$50Northwest 25-D Backhoe, 1:50 Scale ............................$85Northwest 25-D Shovel, 1:50 Scale................................$70Terex PPM AC40/2L ATC, 1:50 Scale............................$190Terex 860sx Backhoe Loader, 1:50 Scale ....................$110Vogele Super 700 Small Paver, 1:50 Scale....................$75Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$155Volvo A25D Articulated Truck, 1:50 Scale ....................$75Volvo BL71 Backhoe Loader, 1:50 Scale ......................$50Volvo L90E Wheel Loader, 1:50 Scale ..........................$75Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale............$85
All New in Box
CALL Toll Free
800-523-2200Ext. 197
NEW!GradallXL4300IIExcavator1:32 Scale$80
NEW!Link Belt
80100 RoughTerrain Crane
1:50 Scale$175
Collections Wanted, I Buy Collections Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Page 28 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
*SALE PRICES REFLECT ALL COMMERCIAL REBATES AVAILABLE DEDUCTED AT TIME OF AD PLACEMENT.
#1CommercialDealer inMinnesota
Dick Reineck 651.251.8214 direct [email protected]
FURYMOTORS South St. Paul, Minnesota
Tax $aving $pecials#1
Chrysler Corp.Commercial Dealer
in Minnesota
2011 Ram 3500 STDCab & Chassis, 4x4, HD
Package, Hemi, Auto Trans,A/C, PW Crysteel Tipper &Tool Box, Boss 9’ Straight
Plow, Stk# L0000
MSRP w/Plow $47,800MSRP w/out Plow $42,819
$avings $alew/Plow $38,688
w/out Plow $33,797
2011 Ram 2500 HD STDCab & Chassis, 4x4 Hemi, T-Tow, Auto Trans, A/C, PlowPkg. Long Box, Anti Spin, HDPkg. Hiniker Plow, Stk# L1601
MSRP w/Plow $39,575MSRP w/out Plow $34,080
$avings $alew/Plow $31,499
w/out Plow $26,299
2011 Ram 4500 STDCab & Chassis, 4x4, H/O
Cummins, MAXTON, Auto Trans,PTO, PW, PL, T/C, A/C, Rugby
Aluminum Body & Toolbox, Hiniker9’ Plow, Stk# LO205
MSRP w/Plow $62,585MSRP w/out Plow $57,199
$avings $alew/Plow $51,899
w/out Plow $46,699
2011 Ram 3500Crew Cab & Chassis 4x4, H/OCummins, Auto Trans, PTO, PWPL TK A/C, Keyless, Much More,All Wheels Aluminum, Hauler & 25/16 Ball Hitch & Class 5 Hitch,
Stk# L0002
MSRP $60,750
$avings $ale$47,999
2012 Ram 2500 HDCrew 4x4, Hemi, HD PKG.PW, PL, T/C A/C Auto Trans,Anti Spin, Plow Pkg., Stk#
N0059
MSRP $39,395
$avings $ale$32,599
2012 Ram 2500 LarameCrew 4x4, Leather, Max Tow,H/O Cummins, Snow PlowPkg. “No Urea”, Stk# N0161
MSRP $56,482
$avings $ale$47,149
2012 Ram 3500 DuallyCrew 4x4
H/O Cummins, Max Tow Pkg.A/C, Auto & More, Dually “No Urea”, Stk# NO180
MSRP $49,175
$avings $ale$41,499
2012 Ram 3500 STDCab & Chassis 4x4, Hemi,Auto Trans, DT PL T/C, A/C,HD Package, Reading
Service Body Class 5 Hitch,Stk# NO060
MSRP $43,011
$avings $ale$35,999
2011 Ram 1500 HD STDCab, Hemi, T/Tow, Auto, A/C,Long Box, Anti Spin HDPackage, Stk# L1227
MSRP $24,700
$avings $ale$18,409
11 Cabs &Chassis in Stock
Now!
We Deliver!
CUSTOM REBUILD DIVISIONCUSTOM REBUILD DIVISIONTOP QUALITY, non-union, independent EMPLOYEES that care deeply for our customers, working in a TOP QUALITY FACILITY in Iowa, equals TOP QUALITY EFFICIENCY!
Custom Rebuilds, Remans & Repowers Rebuilds & Repairs
Contract Remanufacturing, Rebuilding & Mechanical ServicePlease contact Josh Scheckel for any of your service requirements, call 563-872-4112, or email [email protected]
Call today for the BEST PRICES on UNDERCARRIAGE and REPAIR PARTS in the Industry!
Along with our regular customers we welcome dealers and resellers to join our distribution network.For parts please call 563-872-4112, or email [email protected]
Transport and Financing available. Detailed pictures/descriptions at
For equipment rental and sales call 563-872-4112, or email [email protected]
that care deeply for our customers,
Contract Remanufacturing, Rebuilding & Mechanical Service
CAT D10 REMAN
563-872-4112
97/2012 CAT D11R Complete Reman..............97/2012 CAT D10R Complete Reman............97/2012 CAT D9R Complete Reman................1999 CAT D10R Full Specs, New UC............2006 CAT D9T Full Specs, New UC..............(2) 01/02 CAT D9R’S New UC...........1999 CAT D9R 100% UC, Full Specs............(2) 97/98 CAT D6R LGP Full Specs........1999 CAT D6M XL Enclosed Cab...................2005 CAT D6N XL Only 2,800 hours!.............1993 CAT D6H SERIES II Great Condition!...2000 CAT D5M XL Runs Very Well! ...............1986 CAT D5H LGP Priced to Sell!................1992 CAT D5H SERIES II Priced to Sell!........1996 CAT D5H LGP Here is a Nice One! .......
CALL!!CALL!!CALL!!
$445,000$445,000
$235-$255,000$265,000
$105,000 EA$69,000$93,000$65,000$44,000$29,600$38,000$39,000
$78,000$51,000$24,500
$4,500-$18,500$19,000 EA
$12,500-$19,000
$88,000$139,000
$85,000$35,000 EA
$66,000$75,000 EA
2003 DEERE 750C LGP................................2005 DEERE 650J LGP................................1987 CAT 963 TRACK LOADER Nice............
(9) 48” & 60” SHEEPSFOOT...........(2) 2009 HOLMES ROLLERBLADES....... (4) ROME OFFSET DISKS.............
1981 GROVE RT 740 CRANE ......................2007 CAT 320DL Low Hours!.....................2007 FECON FTX140 Crawler Mulcher........(2) 2005 NOBLE 417B Scrapers.............1998 DEERE 7810 MFWD TRACTOR..........(4) 2007 MISKIN DW25’S.....................ATTACHMENTS, RIPPERS, BLADES...............CALL!!
$24,500
$4,500-$18,500$19,000 EA
$12,500-$19,000$12,500-$19,000
$88,000$139,000
$85,000$35,000 EA
$66,000$75,000 EA
CALL!! 2006 CAT D9TNEW UC! $445,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 29
Redefining the hauler – again.Let’s work. Get to Nuss Truck & Equipment for the newest Volvo haulers, setting new standards in the market that Volvo created and continues to lead.
Get the control you need with safe operation at high hauling speeds. Enjoy exceptionally short turning circles, perfect for confined areas and tight turning haul roads. Heavy-duty frames and load bodies are designed for severe off road operation and long service life. Powerful, load sensing hydraulic systems raise the body with precision and control – even on steep downhill gradients. Volvo V-ACT engines provide high torque at low engine speeds, for leading fuel efficiency.
Get your Volvo hauler at Nuss today and start hauling more productivity.
TOOLS WORK™
BURNSVILLE, MN DULUTH, MN MANKATO, MN
ROCHESTER, MN ROSEVILLE, MN ST. CLOUD, MN
Volvo Construction Equipment
B8(
R8(
, MHTULUDN, MELLIVSNRUB53) 8008(9811-25) 5008
LLIVESORN , MRETSEHCOR5 051-26) 5008 40) 7008(
N, MOTAATKNAMN, M5226-26) 8008(5226-
N, MDUOL. CTSN, MEL5390- 5226-01) 3888(
truonsstrucCo vollvV
LS OTO
quipmenttion Etruc
LS UE YOKAT MAAT MHT
SSENISUR BU WO
K™R WO
Page 30 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
STOPS FUEL GELLINGNEW: The Universal Filter Preheater is designed for diesel fuel filter housings, for lube oil and hydraulic filters too (specify hyd. size). It wrapsaround the filter housing and reduces or eliminates the possibility of coldweather fuel gelling stopping the engine. It is easily removable and transferable and is wired for your choice of: direct current or alternatingcurrent or a convertible model combining dc and ac. A standard 12V or 24VUniversal Fuel Filter Preheater is priced at $138.
The ‘peel & stick’ Universal Preheater attaches to thebottom or the side of the oil pan and converts the housinginto a heat transfer element. It warms the oil withoutburning it making cold starts easy. It can be used ongearboxes, transmissions, transfer cases, water tanksand even bulk oil tanks. The Preheater plugs into any120 or 240 volt outlet and consists of a thin siliconefiberglass pad containing a metal grid. To install it, youclean an area on the bottom or side of the oil pan and press the pad onto it, then use silicone toseal the edges of the pad and place a flexible ceramic insulation pad over it. It is available inseveral models depending on the lube capacity. A 50 watt unit sells for $42 and a 350 watt unitsells for $133.
Get the latest news online.Visit CEG’s Web Site at
www.constructionequipmentguide.com
Detroit-Windsor BridgeFuture Again in Doubt
Snyder said a cooling off period wouldallow time to talk to lawmakers about “anymiscommunication or misinterpretation thatmight have taken place over the last coupledays.”
The Snyder administration has hinted itmight act unilaterally to try and getMichigan involved in the project if theLegislature doesn’t cooperate. But the focusnow remains on the Legislature.
Snyder said the New International TradeCrossing is crucial to expanding tradebetween the United States and Canada.Many businesses, including automakers,also covet a new bridge with more conven-ient highway connections.
But the private owners of the AmbassadorBridge already spanning the Detroit Riveroppose a second bridge, say-ing a publicly supportedbridge would unfairly com-pete with their own. The newbridge would be built 2 mi.south of the Ambassador,which has proposed expand-ing its own capacity.
Some Republican law-makers side withAmbassador Bridge ownerManuel “Matty” Morounand have balked at backingthe separate bridge, makingit hard for Snyder to securethe votes needed to begin theproject.
Snyder said Michigan tax-payers wouldn’t be on thehook for the new bridge,which would be privatelyfinanced, built and run. Hesaid the bill is drafted tomake sure taxpayers are protected.
The Ambassador Bridge owners and theirsupporters are skeptical of that claim.Ambassador Bridge owners have lobbiedheavily and run television commercials crit-icizing the bridge proposal.
Canadian officials are so confident theNew International Trade Crossing will bebuilt that construction has begun on a roadthat would link to it. Canada has pledged tocover Michigan’s $550 million share to builda plaza on the U.S. side of the bridge, even-tually recouping the money from tolls.
The estimated price of a new bridge, tolland customs plazas, and expressway linkupsis nearly $4 billion.
Many Republicans have questions abouttraffic projection and use of Canadianmoney in the project. Others, including Sen.
Mike Kowall of Oakland County’s WhiteLake Township, say presidential or federalpermits should be in place before Michiganproceeds.
“I don’t think there’s been enough back-ground work done yet,” said Kowall, chair-man of the Senate’s Economic DevelopmentCommittee.
Kowall was joined by Republicans GoeffHansen of Hart and Mike Nofs of BattleCreek in voting against the bill. JudyEmmons of Sheridan and Dave Hildenbrandof Lowell voted in favor of the committeelegislation.
Senate Democrats said Republicans brokean agreement to include some protections forresidents and businesses in Detroit’s Delraycommunity where the bridge would be builton the U.S. side. Democrats want agree-
ments to deal with noise, health and otherconcerns related to the bridge construction.
Republicans defeated a proposed substi-tute bill that would have included those so-called community benefits provisions. Withthose eliminated, Democrats Tupac Hunterand Virgil Smith of Detroit abstained fromvoting on the committee’s final version ofthe legislation.
“The plan calls for Delray to be torn apartby the new bridge,” Smith said. “I could notas an elected official allow that to happenwithout making sure there were communityprotections in place. With the communityprotection agreement not being added to thebill, I could not support it.”
Snyder said he is supportive of communi-ty benefits.
“The plan calls for Delray to be torn apart by the newbridge. I could not as anelected official allow that tohappen without making surethere were community protections in place.”
Virgil SmithD-Michigan
BRIDGE from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 31
www.rdousedequipment.com
www.rdousedequipment.com61 Locations in 9 States - HQ in Fargo, ND
Online Auctions at: www.RDOAuctions.comBob Schmidt • 972-554-2139
[email protected] (TX)
Jeff Hawks • [email protected] (MN/MT/ND/SD)
Sam Leeper • [email protected] (AZ/CA)
Paul Sears • [email protected] (Int’l)
Follow us on
RDOUsed_Constr
2006 JOHN DEERE 400D, STK# X324124, CAB/AC, 29.5R25, TGATE, BLIN-ER, BX HT, 8691 HRS ......................................................................$155,500
1989 JOHN DEERE 510C, STK# X321394, CAB/HT, 4 X 4, EXTENDABLE,8783 HRS ..........................................................................................$20,000CASE 580E, STK# X330918, ROPS, 2WD, STD STK, 4039 HRS ......$12,0001987 CASE 580K, STK# X330886, CAB/HT, 2WD, STD STK, 9969 HRS ..................................................................................................................$12,0001995 CASE 580L, STK# X331911, ROPS, 2WD, EXT STK, 3839 HRS......................................................................................................................$20,0002006 JCB 3CX, STK# X281695, CAB/AC, W4X4, EXT STK, PLT CNTRL, RC,30”, 3320 HRS ..................................................................................$40,5002008 JOHN DEERE 310SJ, STK# X321551, CAB/AC, 4X4, EXT STKXRC,PILOT, AUX,24’, 3733 HRS ................................................................$67,0002001 JOHN DEERE 310SG, STK# X327346, CAB/HT, 4X4, EXT STK, 24”,3571 HRS ..........................................................................................$44,000
1988 JOHN DEERE 750B, STK# X241128, ROPS, 22” PDS, PAT BLD,6800HRS....................................................................................................$17,0001987 CAT D6H, STK# X297683, CAB/HT, 24” PDS, STR BLD, RIPPER8140HRS....................................................................................................$75,0001994 JOHN DEERE 650G, STK# X319092, CAB/HT, 24” LGP, PAT, 9402 HRS..........................................................................................................$25,0001978 CAT D3, STK# X271246, ROPS, 16” PDS, LT, PAT, WNCH, AUX HYD,4815 HRS ..........................................................................................$13,4002006 JOHN DEERE 700J, STK# X325460, ROPS, XLT, 22” PDS, 120” PAT,SIDE BOOM, 1629 HRS....................................................................$160,0002003 CASE 1650K LGP, STK# X292834, CAB, AC, 32’’ PADS, PAT BLADE,3810 HRS ..........................................................................................$50,000
1998 CAT 953C, STK# X319210, CAB/HT, 16” PDS, 2YD BKT, 10350 HRS..............................................................................................................$30,000
2006 HITACHI 200CLC, STK# X285340, CAB/AC, LNG ARM, LNG TRK, AUX,7802 HRS ..........................................................................................$88,0152010 JOHN DEERE 350DLC, STK# X325086, CAB/AC, 28’ PDS, 10’6” ARM,338 HRS ..........................................................................................$260,0002008JOHN DEERE 200D LC, STK# X328480, CAB/AC, 32” PDS, 9’6” ARM,2645 HRS ........................................................................................$126,0002005 JOHN DEERE 120CLC, STK# X314108, CAB/AC, 28” PDS, 9’11” ARM,4419 HRS ..........................................................................................$62,0002002 JOHN DEERE 160LC, STK# X320919, CAB/AC, MED ARM, LONGTRACK, 10398 HRS............................................................................$33,5002006 JOHN DEERE 50D, STK# X317116, CAB/AC, 2019 HRS ..........$46,7002010 JOHN DEERE 35D, STK# X325717, CAB/AC, AUX HYD, CPLR,THUMB, BLADE, 4 HRS ....................................................................$42,2502004 JOHN DEERE 160CLC, STK# X212889, CAB/AC, LNG ARM, LNG TRK,GP BKT, 9759 HRS ............................................................................$43,9002008 JOHN DEERE 200D LC, STK# X328758, CAB/AC, 9’6” ARM, 32” PDS,430 HRS ..........................................................................................$160,0002009 JOHN DEERE 200D, STK# X318969, CAB/AC, 9’6” ARM, 32” PDS, 48”BKT, 1799 HRS ................................................................................$165,4392005 JOHN DEERE 200CLC, STK# X315952, CAB/AC, 9’7” ARM, 32” PDS,THMB, 4453 HRS ............................................................................$110,0002008 BOBCAT 435H FAST TR, STK# X328570, CAB, AC, LNG ARM, AUX,CPLR, BLADE, 30” BKT, 2105 HRS....................................................$37,2002008 BOBCAT 435H ZHS FAS, STK# X328569, CAB, AC, LNG ARM, AUX,CPLR, BLADE, 30” BKT, 2069 HRS....................................................$37,200
1984 MISCELLANEOUS BOMBARDIER C, STK# X282699, CAB, HTR,PERKINS DIESEL, 1338 HRS ............................................................$16,500
1977 JOHN DEERE 670, STK# X308515, CAB/HT, 14R24, 14’BLD, 3229HRS....................................................................................................$19,5002004 JOHN DEERE 770CH, STK# X303725, CAB/AC, 14/24, 14’ BLD, 6112HRS....................................................................................................$94,0002001 VOLVO G730, STK# X299626, CAB/AC, 14R24, 14’ BLD, FRT SCAR,FRT HTCH, WING, 11,156 HRS..........................................................$70,0002009 JOHN DEERE 772G, STK# X327645, CAB/AC, 14’ BLD, FRT SCAR,2470 HRS ........................................................................................$250,000
2007 CAT 928G, STK# X261081, CAB/AC, 20.5/25, 3YD, 12,834 HRS ....................................................................................................................$64,5002008 JOHN DEERE 624J, STK# X318966, CAB/AC, 20.5R25, RC, 3.5YD, QC,2845 HRS ........................................................................................$165,0002009 JOHN DEERE 544K, STK# X317944, CAB/AC, DDL, HILIFT, AUX, RC,CPLR, 588 HRS................................................................................$160,0002006 JOHN DEERE 544J, STK# X327635, CAB/AC, FRT DIFF, JRB QC,20.5/25, AUX HYD, 4400 HRS ........................................................$112,5002001 CAT 928G, STK# X325628, CAB/AC, NEW 20.5/25, 5.5 YD, 23,522HRS....................................................................................................$38,9002006 JOHN DEERE 624J, STK# X283383, CAB/AC, 20.525, 3.5YD, QC,HILIFT, 13,929 HRS............................................................................$90,0001975 JOHN DEERE 644B, STK# X274819, CAB/HT, 20.525, 3 YD, 8104 HRS..........................................................................................................$16,7001980 FORD A62, STK# X321606, CAB/HT, 17.525, 2.5YD, AUX, 6116 HRS ............................................................................................................$15,0001996 JOHN DEERE 544G, STK# X319336, CAB/HT, 20.5R25, 2.25YD, QC,AUX, 10,596 HRS ..............................................................................$50,0001994 JOHN DEERE 644G, STK# X319537, CAB/HT, 23.5/25, 4YD, QC,18,587 HRS........................................................................................$40,0002005 JOHN DEERE 244J, STK# X330469, CAB/AC, 405/70R20 NEW, 1YD,QC, RC, 4358 HRS ............................................................................$40,0002001 JOHN DEERE 444H, STK# X314224, CAB/HT, DDL, 17.5R25, 2.5YD,13,474 HRS........................................................................................$42,5001998 JOHN DEERE 544H, STK# X314225, CAB/HT, 20.5R25, 2.75YD, RC,10,227 HRS........................................................................................$48,0002008 JOHN DEERE 544J, STK# X304834, CAB/AC, 20.5/25, 3.25YD, QC,RC, 5000 HRS ..................................................................................$100,0002003 JOHN DEERE 724J, STK# X312504, CAB/AC, 23.5/25, 4.75YD, QC,RC, AUX, 6324 HRS ........................................................................$129,0002005 NEW HOLLAND LW110B, STK# X281546, CAB/AC, 17.5R25, 2YD, QC,AUX, 4229 HRS..................................................................................$52,9001989 VOLVO L90, STK# X273152, CAB/HT, 20.5/25, 3.25YD, QC, 10,399HRS....................................................................................................$35,000
2003 JOHN DEERE 240, STK# X325199, 66’’ BUCKET, BACKUP ALARM10X16.5, 3000 HRS ..........................................................................$15,9002005 JOHN DEERE 332, STK# X247418, 2SPD, 14X17.5BB, FOOT, 84’BK,BLCK HT, 2297 HRS ..........................................................................$23,5002006 JOHN DEERE CT322, STK# X318542, CAB/AC, 12” RBR TRK, FTCNTRLS, 2 SPD, 72” BKT, 1852 HRS ................................................$23,5002009 NEW HOLLAND C185, STK# X320377, CAB/AC, HND CNTRLS, 2 SPD,BKT, 842 HRS ....................................................................................$45,9002004 BOBCAT S185, STK# X311675, ROPS, HND CNTRLS, HI FLO, 3583HRS....................................................................................................$15,3001997 ASV MD70, STK# X321395, CAB/HT, HAND CNTRLS, 1785 HRS ..................................................................................................................$10,6002006 JOHN DEERE CT332, STK# X319202, CAB/AC, AUX HYD, GP BKT,3638 HRS ..........................................................................................$24,9352007 JOHN DEERE CT332, STK# X314098, CAB/AC, 18” TRK, FT CNTRLS,2 SPD, 1038 HRS ..............................................................................$32,0002006 JOHN DEERE CT332, STK# X218101, CAB/AC, 18 RBR TRK, 2SP,AUX, HYD QC, 1732 HRS ..................................................................$30,0002007 JOHN DEERE 325, STK# X251518, CAB/AC, 2 SPD, 2989 HRS ......................................................................................................................$25,815
SKID STEERS
WHEEL LOADERS
MOTOR GRADERS
MISCELLANEOUS EQUIPMENT
EXCAVATORS
CRAWLER LOADERS
CRAWLER DOZERS
BACKHOE LOADERS
ARTICULATED TRUCKS
2008 BOBCAT 435H FAST TR ..............$37,200
2007 CAT 928G ....................................$64,500
2006 JCB 3CX ......................................$40,500
VISITwww.rdousedequipment.com
• Faster Search• Expanded Inventory
• Larger Photos
Page 32 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
See geith.com for Terms and ConditionsT: 866-472-4373 (Toll Free)T: 704-883-3500F: 866-472-4950www.geith.com
GeithProven, Durable & Trusted for Generations.
3 year warranty on couplers ordered from 15th August to 15th December 2011
Page 34 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Friendly Competition Abounds as BaleEquipment Hosts Triple Threat Rodeo
Al Fox (L) of Fox Excavating, Clarendon, Pa., gets lastminute instructions on operating this Case 221E Series3 wheel loader from Case Equipment Company’s RobMarringa.
Tait Davenport (L) of Murtco Inc. gets news of his timeon this Case 580 Super N backhoe from CaseConstruction’s Paul Wade.
(L-R): Bale Equipment’s Glen Gish, Case Equipment’s Brent Battaglia, and Bale Equipment’s CEO, Bill Abel Jr. wel-come contestants to the Rodeo.
RODEO from page 22
FlangeLock Contamination Control Tool Receives PatentFlangeLock LLC, founded and based in Greenwich,
Conn., received a patent from the U.S. Patent Office withinthe past two months for its contamination control tool, theFlangeLock.The FlangeLock tool is an easy-to-use cap that slides onto
the fitting and is sealed with one turn of the bottom plug,keeping oil in and contaminants out. It is produced in sizes for 8, 10, 12, 16, 20, 24 and 32 in
codes 61, 62 and KAT-style hydraulic flanges.The FlangeLock is manufactured in Connecticut with
lightweight anondized aluminum. The FlangeLock is color-coded for easy-to-identify sizes.“The FlangeLock represents major savings in a number of
areas,” Mike Pearl, part owner of FlangeLock LLC, said. “Itwill save time because there won’t be any oil leaking andhaving to be cleaned up. It will save moneybecause again, with no leaks, no oil is wast-ed. And a really big savings will be with EPAcleanups. The EPA is looking at a lot ofequipment right now and a lot of companiesare being temporarily shut down in order toget things cleaned up. The FlangeLock willcut way down on that lost time and money.”Equipment owners seeking to stop oil
leaks are not the only ones who benefit fromthe FlangeLock. Pearl foresees the factorieswhere the equipment is manufactured beingable to use the FlangeLock during the assem-bly process to keep contaminants from enter-ing the lines and, if a customer desires, sell-
ing them on the equipment. As well, “hoses get cleaned and
capped when you buy them,” Pearl said,“but there’s nothing to keep the caps on.A customer buys some hoses, tossesthem into the back of a truck, the capscome off and those new hoses arealready contaminated. The contaminantsget into the machine, and there’s a prob-lem. We have the solution.” Since the FlangeLock’s inception in
2009, the company’s dealership networkhas substantially grown. Initially theproduct was distributed only throughwww.flangelock.com and HO Penn,
headquartered in Poughkeepsie,N.Y. Today, the FlangeLock canbe found across the United Statesand Canada through such dealersas Cleveland Brothers, based inHarrisburg, Pa.; Edward EhrbarInc., Yonkers, N.Y.; SunSource,with many branches throughoutthe United States; GenesisAttachments; JewellAttachments; Finning CAT ofCanada; HosePower USA, withbranches across the UnitedStates; Dakota Fluid Power, withbranches in the Dakotas andNebraska; Progressive
Hydraulics, with branches in New Jerseyand New York State; and many more.And with the FlangeLock’s ever-growing
distributorship, Pearl said he’s hoping toapproach selling 10,000 pieces sold by theend of 2011, as well as continuing to expandwith additional distributorships.For more information call Mike Pearl at
914/980-8890, or visit flangelock.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)CEGThe FlangeLock is manufactured in Connecticut with lightweight anondized
aluminum.
The FlangeLock tool is an easy-to-usecap that slides onto the fitting and issealed with one turn of the bottom plug,keeping oil in and contaminants out.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 35
2006 CAT D6R LGP, S/N WRG00185, 5302 hrs $182,000 2007 CP-563E, S/N CNT01572, 1209 hrs ....$116,700 1990 CAT 235C MH, S/N 3WG00230 ............$45,000 2005 CAT 330CL LR, S/N DKY04185, 3,073 Hrs $220,000
2005 CAT 963C, S/N BBD02054, 4716 Hrs ....$76,000 2006 CAT 232B, S/N SCH01798, 684 Hrs ......$19,9002008 CAT 297C, S/N GCP00574, 2167 Hrs ....$40,000 2000 CAT 966G, S/N 3SW00855, 9627 Hrs$121,000
1977 CAT 120G, S/N 87V02662, 7670 Hrs ..$37,500 2006 CAT 613C II, S/N 8LJ02973, 1933 Hrs $126,500
Locations in Iowa, Illinois & MissouriBUY • SELL • CONSIGN • RENT
800-333-5993Bill Misgrave Ext. [email protected]
Corporate Office Cedar Rapids, IA.
Complete inventory & photos at:www.altorfer.com
Clean Running Diesel Engines from 5.6 to 99 HP for OEM, Irrigation, Replacement and Industrial Power Applications
Powerful. Reliable. Kubota.
Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Reliable. Reliable. Reliable. Reliable. Reliable. Reliable. Reliable. Reliable. Reliable. Reliable. Reliable. Kubota.Kubota.Kubota.Kubota.Kubota.Kubota.Kubota.Kubota.Kubota.Kubota.
Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Reliable. Kubota.
Clean Running Diesel Engines from 5.6 to 99 HP for OEM, Irrigation, Replacement and Industrial Power Applications
Powerful. Powerful. Powerful. Powerful. Powerful. Powerful.
Clean Running Diesel Engines from 5.6 to 99 HP for OEM,
Industrial Power Applications
Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful. Powerful.
Your complete source of engine and generator power
314-868-8620 www.ckpower.comIn St. Louis, ask for John Costello In Illinois, ask for Dan Fichter
In Missouri & Kansas, ask for Bob Balsat
2 12/2/09 11:20:29 AM
Expanding Coverage...
Alban Tractor, Ziegler CATAppointed as NorAm DealersAlban CAT based in Baltimore Md., now
represents the NorAm 65E compact motor-grader from its 11 locations in the mid-Atlantic region. The 84 year old familyowned Caterpillar dealer will sell, rent andsupport the 65E at each branch locationincluding its extensive network of CATRental Stores: Alban Rents. Ziegler CAT based in Minneapolis,
Minn., will provide coverage for its marketfrom its 13 locations in Minnesota and sevenin Iowa. Ziegler will provide sales, serviceand parts from all locations including ZieglerRental operations. The 97 year old dealer-ship has represented the Caterpillar productline sine 1914.The NorAm 65E follows a 60 year her-
itage of compact graders originating with theAllis Chalmers model “D” in 1949. Themachine continued to be an industry leader
as the Fiat-Allis model 65B from the 1970sthrough the 1990s. NorAm ConstructionEquipment began marketing the machine in1993 and has continually strived to updatethe unit to current technical and performancestandards while maintaining the traditionalfeatures that have made the machine a staplein the industry, according to the manufactur-er.“We are very pleased to have Alban
Tractor and Ziegler CAT join our team,” saidDave Watson, vice president of NorAm.“Both companies feature extensive historiesand are very highly respected in their mar-ketplaces. Our machine complements theirproduct lines and provides their sales profes-sionals with additional creative and costeffective solutions for customers in theirareas of trade.”For more information, visit noram65.com.
Page 36 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Murphy Tractor & Equipment Hosts Customer Luncheon
In addition to checking out the John Deere equipment, customers enjoy a lunch buf-fet.
Rich Fawson (standing), Murphy Tractor & Equipment general manager — service,and Ulysses branch technicians review certified service training.
A customer sits in the cab of the John Deere 624K to get afeel for what it’s like behind the wheel loader’s controls.
Ulysses Service Technician Zach Rupp (R) points out themany features of the John Deere 772GP motorgrader to aluncheon attendee.
Murphy Tractor & Equipment Co.’s Ulysses, Kan., branch played host to the lunch-eon event.
The John Deere 624K wheel loader was a big attraction at the customer event.Customers could check out its new features, including upfront, and enhanced multi-function monitor displays operation, diagnostic and maintenance information on acolor LCD screen, and a quieter cab that has more legroom and improved ergonom-ics.
Murphy Tractor & Equipment Co. Inc.invited customers to a luncheon Oct. 14at its branch in Ulysses, Kan. More than
100 individuals attended the gathering, where theyenjoyed lunch, learned about John Deere equip-ment, and had a chance to interact with MurphyTractor personnel.
During the event, a variety of John Deere equip-ment pieces were on display for customers, includ-ing the John Deere 624K wheel loader, the 330Dand 332D skid steers and 872GP motorgrader.
Murphy Tractor and Equipment Company Inc.,one of John Deere’s largest North American con-struction equipment dealer organizations, is head-quartered in Wichita, Kan. The organization has 26locations throughout the states of Iowa, Kansas,Missouri, Ohio, Pennsylvania and Nebraska. Formore information, visit www.murphytractor.com.
Arctic Snow & Ice, Patten Industries Welcome Snowfest Arctic Snow & Ice Control
Products and Patten IndustriesInc. hosted Snowfest 2011 at
Arctic Snow & Ice Control’s facility inFrankfort, Ill., on Oct. 14. Attendees gota chance to experience first-hand thecombination of Arctic snowplows andCat machines as a system for snowremoval.In addition to the equipment demon-
strations, there were door prizes everyhour and an equipment rodeo.Other sponsors for the event included
Arlington Power, Central Salt,Chambana Sales, and Rigg’s OutdoorPower Equipment.
Pages 37-45
Snow and Ice Section
Demonstrating the 8 ft. light-duty sectional plow isBrandon Frigo of Arctic Snow & Ice Control.
Steve Sepaniak, (L) director of sales Arctic Snow & IceControl, and Arctic Snow & Ice Control OperationsManager Jeff Sexton (R) show the wide range of plowsthey have to offer to Ray Guzak, president of R. GuzakContracting.
(L-R): Patten Industries Sales Manager Mike Jaworskiwelcomes Kurt Kelderhouse of Zenere Companies andGreg Zenere, Zenere Companies president, to Snowfest2011. Patten industries was a major sponsor of ArcticSnow & Ice Control’s Snowfest 2011.
John Salek (L) of Patten Industries speaks with JohnStarek, director of operations of Arctic Snow & IceControl, at the Snowfest 2011 in Frankfort, Ill.
(L-R): Brandon Frigo of Arctic Snow & Ice Control and TomRigg and Paul Richey of Rigg’s Outdoor Equipment check outthis Cat 252B equipped with an Arctic 8 ft. light-duty sectionalplow.
Dave Welden (L) of K&D Enterprise listens to PattenIndustries Sales Representative Russ Woelke explainthe features of the Arctic Snow & Ice Control sectionalsnowplows.
Chad Mennenga of Superior Landscaping looks at theArctic 8 ft. sectional plow.
(L-R): Randy Strait, owner of Arctic Snow & Ice Control, showsthe Arctic plow lineup to Nation One Landscaping Co. PresidentBrian Emmick and Lance Moline, also of Nation OneLandscaping Co.
Page 38 • October 29, 2011 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
Kioti Snowblowers Enhance Tractor Attachment LineKioti Tractor has expanded its
implement and attachment linesto include three front mountsnowblower models.The new implements are
designed to fit Kioti’s entire CKline of compact tractors rangingfrom 20 to 35 hp (15 to 26 kW),as well as its DKSE models inthe 40 to 50 hp (30 to 37 kW)range. All of the new frontmount snowblowers are pow-ered off the tractor’s mid-mountPTO and are secured to a specialsub-frame that includes a quickattachment system, giving theoperator optimal flexibility andenhanced productivity. Adjustable lateral skid shoes
are standard on the KS66-220FM and KS72-220FM,while offered as an option on thesmaller KS54-180FM model.These two-stage snow movers
are available in three operatingwidths — 54, 66 and 72 in. (137,167 and 183 cm) — to suit acombination of applications andto fit a wide-range of tractors.Center-balanced 14 or 15 in.
(35.5 or 38 cm) diameter augersmove snow quickly and effort-lessly to a centerpoint dischargewindow, where a high-speed,four-blade fan moves it directlyto the discharge chute.Reversible/replaceable carbonsteel cutting edges are standardon the larger models.The discharge chute itself is
hydraulically driven. Thissmooth-operating chute rotatesup to 282 degrees, giving theoperator a wide range of dis-charge options. The chuterotates on a high modulus poly-ethylene bushing that providessmooth, long-lasting operation.The chute discharge deflectionangle may be manually adjust-ed. This is a standard feature onall three models. Both hydraulicand electric deflectors, con-trolled at the operator station, areavailable as options. The latteris powered by the DC electricalsystem of the tractor.For more information, call
877/465-4684 or visitwww.KIOTI.com.
The new implements are designed to fit Kioti’s entire CK line of compact tractors ranging from 20 to 35hp (15 to 26 kW), as well as its DKSE models in the 40 to 50 hp (30 to 37 kW) range.
Boss Snowplow Champions ProjectGives Free Snow Removal ServicesFollowing a successful launch last year, The Boss snowplow is underwriting
a second year of Project EverGreen’s SnowCare for Troops program and urg-ing snow removal professionals to join the movement and double the volunteerbase in year two. SnowCare for Troops provides free snow removal servicesfor military families with a spouse or family member serving in the armedforces through a dedicated volunteer network.“The response to SnowCare for Troops from caring professionals and mili-
tary families has been tremendous and we are challenging our supporters todouble the participation for the 2011-12 snow season,” said Mark Klossner,marketing manager of The Boss snowplow. “We want to thank everyone whogave countless hours in heavy snow, sleet and ice to back up our country’s self-less military families this past winter. As the brand that backs up snow removalprofessionals, we’re asking for their help to spread the word and expand par-ticipation this year. We know they’ll get back tenfold what they put into it.”Snow removal professionals and other volunteers have many ways to sup-
port the SnowCare for Troops program, including:• Offering free snow removal services throughout the winter to one or two
families in their service area;• Loaning snow removal equipment to volunteers or groups; • Donating money, transportation or gas cards to offset snow removal and
maintenance costs; and• Referring friends and/or military families they may know to sign up for the
program.The Boss underwrites the SnowCare for Troops program. It’s open to any-
one with a plow or other snow removal equipment who wants to lend a hand.Through its active backing and participation, Boss provides funding support
and helps build awareness for SnowCarefor Troops to encourage grassroots involve-ment. “SnowCare for Troops got off to a roar-
ing start, and we want to thank Boss snow-plow for backing up military families onceagain through its integral support,” saidProject EverGreen Executive DirectorCindy Code. “When a loved one is servingoverseas in the armed forces, having theadded burden of snow removal liftedfrom the shoulders of the one left behindis a priceless gift.”Project EverGreen’s SnowCare for
Troops and its sister program GreenCarefor Troops are serving thousands of mili-tary families through a coast-to-coast net-work of lawn care, landscape and snowcare professionals and volunteers dedicat-ing thousands of service hours to militaryfamilies. Project EverGreen has 12,000 mil-itary families in its database, more than 3,500green industry participants and nearly 1,000 snow careprofessionals and volunteers. For more information, visit www.projectevergreen.com/scft
or www.bossplow.com/snowcarefortroops.
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 29, 2011 • Page 39
Page 40 • October 29, 2011 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
TRIPLETHREAT.
NOTHING’S TOUGHER, SMARTER OR FASTER than THE BOSS XT line of plows, including the NEW Poly Power-V XT. A rock-solid combination of professional-grade toughness, Power-V versatility and super-slick poly effi ciency, the newest XT is unlike any plow in the industry. But that’s no surprise coming from THE BOSS. We’ve been driving the industry forward for 24 years with products that make your job faster and easier. Simple as 1-2-3.
THE BOSS XT PLOWS:• NEW Poly Power-V XT… 8'2" 9'2"• Steel Power-V XT……… 8'2" 9'2"• Super-Duty XT…………. 8'0" 8'6" 9'0"
Taller blade and enhanced curl• 37" tall fl ared blade wings on Power-V models• High-performance cutting edge•
• SmartHitch® 2 • SmartLight™ 2 • SmartTouch® 2 • SmartShield®
b o s s p l o w . c o m
( D E A L E R I M P R I N T )
STOP IN TODAY!
©2009 BOSS Products/Northern Star Industries, Inc.
•
• SmartLight™
b
9'2"
• 9'0"
T
SmartLight™
©2009 BOSS Products/Northern Star Industries, Inc.
•
CANNON TRUCK EQUIPMENT 51761 Danview Technology Court • Shelby Twp., MI 48315
586-991-0054Fax:586-991- 0074
www.cannonequip.com
CRYSTEEL TRUCK EQUIPMENT52248 Ember Rd.PO Box 733
Lake Crystal, MN 56055800-722-0588
www.crysteeltruck.com
1130 73rd Ave. N.E. • Fridley, MN 55432800-795-1280
TOPPERS PLUS1929 E. Madison Ave. • Mankato, MN 56001
800-321-7587www.toppersplus.com
Phone: (905) 332-8088 | Toll Free: (877) 321-2282
www.machinability.comQUALITY DOESN’T COST – IT PAYS!
Municipal Trucks • Wheel Loaders • Backhoes • Tractors • Skid Steers • Sidewalk Equipment
12’/22’ SW48
Power Side Wing Plow
5’ V35 Power Vee Plow,
narrows to 48” for sidewalks
Many Plow Models and
Mounting Options
Available 4’ thru 24’
12’ V48
Power Vee Plow
8’ - 14’ Box Plows
Available with Trip Edges
The latest snow fighting product from HenkeManufacturing is its parallel lift plow. Designed to remainparallel to the ground in transport or in angling positions, thisplow can be completely removed from the truck hydrauli-cally, leaving only a flat plate. The truck hitch and powerreversing and lifting mechanisms remain with the plow. The parallel lift plow has an inverted “J” shape 43 in. (109
cm) high moldboard with 10 vertical ribs. The moldboard isavailable in steel or polymer in 10, 11 and 12 ft. (3, 3.5 and3.6 m) lengths.Henke Manufacturing has more than 90 years experience
in the design and manufacture of snow fighting equipmentutilized in both the public and private sectors. ItsLeavenworth, Kan., headquarters currently employs morethan 90 people with 70,000 sq. ft. of manufacturing. Henke is a member of the Alamo Group Inc., headquar-
tered in Seguin, Texas. For more information call 888/682-9010.
Snow Problem...
Parallel Lift PlowIs Latest Additionto Henke Lineup
IAVA-Vertical
J Thin Vertical 4/C
B NoneT 3.5 in x 10 inS NoneG NoneP Ad CouncilI n/aT Donna MendietaA Kathy LandoA Robert EspositoR n/aP
n/a
Color Space Eff. Res.0
P
11-26-2008 11:46 AMP
99% of Americans have seen combat on TV.
1% of Americans have seen combat in Iraq or Afghanistan.
We know where you’re coming from. If you’re a veteran of Iraq or Afghanistan, you’re not alone.
We’ve been there. Join us at CommunityofVeterans.org
Phot
o by
Pet
ty O
ffice
r 2nd
Cla
ss S
andr
a M
Pal
umbo
US
Nav
y B
ahra
in N
ovem
ber 6
200
7
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 29, 2011 • Page 41
Page 42 • October 29, 2011 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
CALL 888-529-5524 TODAY!
Snowplows for all sizes of trucks and tractors
Act fast, Pre-Season Specials on now!
14311 Ewing Avenue, Burnsville, MN 55306 | [email protected] | www.StonebrookeEquipment.com
Visit our NEW website products page!
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 29, 2011 • Page 43
JCB of Chicago1603 East Algonquin Rd
Arlington Heights, IL 60005847-437-8686
Fax: 847-437-8738
16754 New AveLemont, IL 60439630-257-1261
Fax: 630-257-0614
1548 Huntwood DrCherry Valley, IL 61016
815-332-8222Fax: 815-332-3056
www.casey-equipment.com
Diesel Machinery Inc.4301 N. Cliff Ave.
Sioux Falls, SD 57104605-336-0411
Fax: 605-336-9503
Rapid City, SD 57702605-348-7438
Aberdeen, SD605-725-4364
JCB of Milwaukee12011 W. Silver Spring Drive
Milwaukee, WI 53225262-783-7510
JCB of Ohio8155 Roll & Hold ParkwayMacedonia, OH 44056
800-752-1220www.jcbohio.com
Sievers Equipment406 Old Rt. 66 • Hamel, IL 62046
618-633-2622
8080 State Rt. 16 • Hillsboro, IL 62049217-532-3222
State Rd. 267 SouthGreenfield, IL 62044217-368-2486
14464 Shad Rd. • Carlinville, IL 62626217-854-3191
1351 West Jackson St. • Auburn, IL 62615217-438-6111
MH JCB106 Circle Freeway DriveCincinnati, OH 45246(Ph) 513-681-2200(Fax) 513-681-1235
3306 Gilmore Industrial Blvd.Louisville, KY502-962-6560
Fax: 502-810-9306
5859 Raymond St.Indianapolis, IN 46241
317-240-6300www.mhjcb.com
WHEN SNOW BRINGS THINGS TO A STANDSTILL, WE’LL GET YOU MOVING AGAIN
www
.jcbvision.comwwww.jcbvision.com
dnI
yrtneroodedisylnos’yrtsuYTEFAS
N ITSEB
b%06V
boN
noititepmocnahtrettebYTILIBISIV
N ITSEB
33OC
noisivruoslavirydob
bacregral%3TROFMO
N ITSEB
ni000,3$otpUCIFFEEB
sgnivaavsleuflaunnanYCNEIC
N ITSE
EASretteb%42ECIVRESTSEB
sEYTILIBAE
N IT
OL
mSNOITACO
roF
petStaatergreets
BCJ
vbbvcj.ww.wwwwwwtisivnoitamroffonierom
dnaroodedisylnos’yrrytsudniruoniytilibisseccadesaercni,yy,tilibisivreterev’ew,ww,oN.rr.oodedisahtiwrapmocyranoisivaneebsyaywlasah
y
ww:golbruotisivrowwtaatnaffaaemocebmoc.noisiv
yryanidroonsisihtyhwnraelll’uoydla–elbatrrtoffomoceromtiedamdna
ehtmorfreetsdiksruodengisedhkcabehtfonoitnevniehtmorf,yy,na
moc.tridbcj.wwbcj//jmoc.koobecaffa.ww
.rr.eetsstdiksy. yy. teffeasgnicfiircacstuohtiwlt inevigev’eWWe.pudnuorgd iksylnoehtot,rr,edaoleoh
Page 44 • October 29, 2011 • www.constructionequipmentguide.com • Snow & Ice Section • Construction Equipment Guide
Paladin’s FFC Snow Push Removes More Than Just Snow
Available in widths ranging from 6 to 16 ft. (1.8 to 4.8 m), the FFC snow push can move up to 21 cu. yds. (16 cu m) ofsnow at one time.
The FFC snow push by Paladin ConstructionGroup attaches to skid steers, backhoes, compactwheel loaders and traditional wheel loaders to effi-ciently move large volumes of snow without leavingwindrows. Available in widths ranging from 6 to 16 ft.(1.8 to 4.8 m), it can move up to 21 cu. yds. (16 cu m)of snow at one time. An optional pull-back kit clean-ly draws back snow away from buildings, fences andconfined areas, creating a more effective snowremoval process. In addition to snow applications, theFFC snow push is ideal for waste water, manure, feed,lot and food cleanup, according to the manufacturer.
The FFC snow push is available in 127 Series,3600 Series and 4800 Series models. The FFC 127Series snow push offers lighter weight modelsdesigned for skid steers and is ideal for snow removalin confined spaces. Available in widths ranging from6 to 10 ft. (1.8 to 3 m), it can move up to 8 cu. yds. (6cu m) at one time.
The FFC 3600 Series snow push attaches to skidsteers, backhoes and compact wheel loaders and isavailable in widths ranging from 8 to 14 ft. (1.8 to 4.3m). It is able to easily move up to 13 cu. yds. (10 cum) at one time. The FFC 4800 Series snow push hasa width of 16 ft. and attaches to backhoes, compactwheel loaders and traditional wheel loaders. Ideal forlarger applications, it has a push capacity of 21 cu.yds.
For more information, call 800/456-7100 or visitwww.paladinconstructiongroup.com.
SnowEx Releases New Pair of Ground-Drive SpreadersSnowEx has two new ground-drive
spreaders for use on sidewalks, parkinglots and other off-road applications.Equipped with lawn-and-garden stylehitches, they are designed to tow behindcompact tractors, ATVs and utility vehi-cles.
The SP-725G and SP-1225G offer 7-and 12-cu.-ft. (.2 and .3 cu m) capacities,respectively. They feature corrosion-resistant polyethylene hoppers and 12-in.(30.5 cm), adjustable stainless-steel spin-ners. Due to its agitation system, thespreaders are capable of handling baggedrock salt and ice melters. They spread upto 30 ft. (9 m) wide at 5 mi. (8 kmh) perhour and are available with a deflectorskirt kit for narrowing the spread widthon sidewalks.
The ground drive system is comprisedof a heavy-duty transmission and large,narrow pneumatic tires for maximumtraction on snow and ice. Other standardfeatures include a 14-ft. (4.3 m) cable forcontrolling the manual gate and a clear,fitted hopper cover for weather protec-tion. Both models are covered by a two-year limited warranty.
For more information, call 800/725-8377 or visit www.trynexfactory.com.
The SP-725G and SP-1225G feature corrosion-resistant polyethylene hoppers and 12-in. (30.5 cm), adjustable stainless-steel spin-ners.
Construction Equipment Guide • Snow & Ice Section • www.constructionequipmentguide.com • October 29, 2011 • Page 45
Page 46 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
KENTUCKY
MICHIGAN
MINNESOTA
ILLINOIS
INDIANA
KANSAS
For commercial use only. Customer participation subject to credit qualification and approval by CNH Capital America LLC. See your Case Dealer for details and eligibility requirements. Down payment may be required. Offer good through December 30, 2011 at participating dealers. Not all customers or applicants may qualify. Taxes, freight, set-up, delivery, additional options or attachments not included in payment example above. Offer subject to change or cancellation without notice.©2011 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. www.casece.com
CASE AUTHORIZED DEALERS
(847) 336-1205WaukeganBurris Equipment
(217) 337-1781Urbana(217) 235-3158Mattoon(309) 341-4360Galesburg(309) 827-0520Bloomington
Birkey’s Construction Equipment ILLINOIS
CASE AUTHORIZED DEALERS
(847) 336-1205
(217) 337-1781(217) 235-3158(309) 341-4360(309) 827-0520
Birkey’s Construction Equipment
MurrayMcKeel Equipment Company
Bowling GreenDiamond Equipment
RadcliffLouisvilleBale EquipmentKENTUCKY
(270) 753-3062McKeel Equipment Company
(270) 781-1061Diamond Equipment
(270) 352-5970(502) 589-9901
Bale EquipmentKENTUCKY
McCann Industries
(217) 744-2233Springfield(217) 222-5454Quincy
Luby Equipment Services
(618) 233-2184BellevilleH. Edwards Equipment
(618) 242-2273Mt. VernonDiamond Equipment
(815) 363-4100Ingleside(847) 336-1205Waukegan
(217) 744-2233(217) 222-5454
Luby Equipment Services
(618) 233-2184H. Edwards Equipment
(618) 242-2273
(815) 363-4100(847) 336-1205
PrestonsburgLexingtonCorbinWilson Equipment
AshlandState Equipment
BurlingtonSoutheastern Equipment
PaducahMurray
(606) 874-8037(859) 254-6443(606) 528-0700
Wilson Equipment
(606) 928-5644State Equipment
(859) 586-6133Southeastern Equipment
(270) 444-0110(270) 753-3062
(812) 425-4428EvansvilleDiamond EquipmentINDIANA
(815) 397-6200RockfordMiller-Bradford & Risberg
(815) 385-0420McHenry(630) 739-7770Bolingbrook(630) 627-0000Addison
McCann Industries
(812) 425-4428
(815) 397-6200Miller-Bradford & Risberg
(815) 385-0420(630) 739-7770(630) 627-0000
Northern Michigan Equipment
NegauneeMiller-Bradford & Risberg
BridgeportBridgeport Equipment Co.MICHIGAN
LibertyWright Implement
Northern Michigan Equipment
(906) 475-4181Miller-Bradford & Risberg
(989) 777-1900Bridgeport Equipment Co.MICHIGAN
(606) 787-8331Wright Implement
(219) 865-6545ScherervilleMcCann Industries
(574) 271-0800South Bend(765) 742-2080Lafayette(317) 856-3000Indianapolis(260) 747-1561Fort Wayne
MacDonald Machinery Co.
(812) 683-2763HuntingburgHopf Equipment
(812) 299-4747Terre Haute
(219) 865-6545
(574) 271-0800(765) 742-2080(317) 856-3000(260) 747-1561
MacDonald Machinery Co.
(812) 683-2763
(812) 299-4747
HermantownCrookstonTitan MachineryMINNESOTA
NoviHoltSoutheastern Equipment
Traverse CityNorthern Michigan Equipment
(218) 727-3038(218) 281-4668
Titan MachineryMINNESOTA
(248) 349-9922(517) 694-0471
Southeastern Equipment
(231) 943-3700Northern Michigan Equipment
(219) 865-6545Schererville
(219) 865-6545 MarshallRogers
(507) 532-5783(763) 428-5099
. Cdevreses rthgil rl. ACLa LciremH AN1 C102©naho ct tcejbur seff. Oevobe alpmaxt enemyap
y qas mtnacilppr as oremotsul clt ao. Nsrelaed. Dstnemeriuqey rtilibigild ens aliater dor felaeDtapicitrar pemotsu. Cylne osl uaicremmor coF
ww. wCLa LciremH ANf Ck oramedard teretsiges a re isa. C.ecitot nuohtin woitallecnar ce ogn
r as onoitpl oanoitidd, ayrevile, dpu-te, sthgier, fsexa. T Tayfilauy qmeceh Dguorhd toor geff. Oderiuqee ry bat mnemyan pwo. DtipaH CNy Cl bavorppd ann aoitacifilaut qidero ct tcejbun soi
moc.ecesac.w
n d iedulcnt ios ntnemhcattr ag nitapicitrat p1 a10, 20r 3ebm
e sar Cuoe ye. SCLa Lcireml Aat
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 47
JLG Announces New GlobalVice President of Marketing
JLG Industries Inc., an OshkoshCorporation company and a manufactur-er of aerial work platforms and telescop-ic material handlers, announced BradNelson has joined the executive team asglobal vice president of marketing.
With more than two decades of expe-rience in marketing, product strategy andbusiness management, Nelson mostrecently served as vice president of glob-al marketing and communications forEaton Corporation, a global power man-agement leader. Nelson brings to his newposition extensive knowledge of market-ing strategy, global market development,branding, commercial marketing, seg-mentation, product marketing and pro-motion. All global marketing and prod-uct management team members willreport to Nelson.
“We are excited to welcome Brad toour executive team as his experience andleadership skills will prove invaluable aswe continue to deploy marketing strategiesaround the globe that strengthen our positionas the leader in aerial work platforms and tel-escopic material handlers,” said Wilson
Jones, Oshkosh Corporation executive vicepresident and president of AccessEquipment and JLG Industries Inc.
For more information, visit www.jlg.com.
Brad Nelson has joined the executive teamas global vice president of marketing.
SOUTH DAKOTA
OHIO
WISCONSIN
IOWA
MISSOURI
NEBRASKA
NORTH DAKOTA
(515) 974-5100Des Moines(563) 386-0400Davenport(641) 357-2511Clear Lake(319) 849-3889Center Point
Titan Machinery
(641) 683-1691OttumwaGreiner Implement Company, Inc.IOWA
(515) 974-5100(563) 386-0400(641) 357-2511(319) 849-3889
(641) 683-1691Greiner Implement Company, Inc.
OHIO
Sioux FallsRapid CityPierreAberdeenTitan MachinerySOUTH DAKOTA
(605) 336-3434(605) 388-0266(605) 224-9247(605) 225-0505
Titan MachinerySOUTH DAKOTA
(636) 343-9970Fenton(573) 334-9937Cape Girardeau
Luby Equipment Services
(573) 636-5281Jefferson City(573) 392-0230Eldon(573) 443-4541Columbia
Crown Power and EquipmentMISSOURI
(712) 239-4941Sioux City(515) 974-5100Des Moines
(636) 343-9970(573) 334-9937
Luby Equipment Services
(573) 636-5281(573) 392-0230(573) 443-4541
Crown Power and Equipment
(712) 239-4941(515) 974-5100
Gallipolis Dublin Cambridge Brunswick Brilliant Southeastern Equipment
Ridgeville CornersMeyer Equipment
SugarcreekEckert Brothers
(740) 446-3910(614) 889-1073(740) 432-6303(330) 225-6511(740) 598-3400
Southeastern Equipment
(419) 267-3848Ridgeville CornersMeyer Equipment
(330) 852-2611Eckert Brothers
(417) 781-8222JoplinVictor L. Phillips Company
(816) 331-6078BeltonRex Spencer Equipment
(417) 862-9275SpringfieldPotter Equipment Company
(573) 785-9628Poplar BluffNelson Tractor & Equipment
(636) 343-9970Fenton
(417) 781-8222Victor L. Phillips Company
(816) 331-6078Rex Spencer Equipment
(417) 862-9275Potter Equipment Company
(573) 785-9628Nelson Tractor & Equipment
(636) 343-9970
Eaton Twin Valley Equipment
PerrysburgNorth CantonMonroeMentorMariettaMansfieldHeath
(937) 456-6281Twin Valley Equipment
(419) 874-0331(330) 494-3950(513) 539-9214(440) 255-6300(740) 374-7479(419) 529-4848(740) 522-3500
NORTH DAKOTA
(402) 733-3700Omaha (308) 532-6571North Platte(402) 464-3711Lincoln
Titan MachineryNEBRASKA
(816) 241-9290Kansas City(417) 781-8222Joplin
NORTH DAKOTA
(402) 733-3700(308) 532-6571(402) 464-3711
(816) 241-9290(417) 781-8222
New FrankenFond du lacDaleService Motor Company
SussexMadisonEau ClaireAbbotsfordMiller-Bradford & RisbergWISCONSIN
(920) 468-7700(920) 923-1768(920) 779-4311
Service Motor Company
(262) 246-5700(608) 222-9191(715) 832-3443(715) 223-2381
Miller-Bradford & RisbergWISCONSIN
Williston
(701) 852-3188Minot(701) 775-8111Grand Forks(701) 237-3333Fargo(701) 227-5309Dickinson(701) 250-7925Bismarck
Titan Machinery
(70
(701) 852-3188(701) 775-8111(701) 237-3333(701) 227-5309(701) 250-7925
Triebold Implement
La CrosseTitan Machinery
SeymourNew Franken
01) 577-0024 Whitewater
Triebold Implement
(608) 788-1025Titan Machinery
(920) 833-2378(920) 468-7700
(262) 473-2090
Construction Materials PricesFlatten as Activity Begins to Slowsince September 2010; copper and brassmills shapes, down 0.7 percent in Septemberbut up 14.8 percent over 12 months; steelmill products, which slipped 0.6 percent forthe month but rose 13.5 percent for the year;and aluminum mill shapes, down 1.8 percentfor the month but up 10.4 percent from ayear earlier.
“These prices can spike anytime there is aglobal supply disruption or a consensus thatdemand is strengthening worldwide, not justfrom U.S. construction,” Simonsonexplained. “In contrast, materials producedhere and used only by U.S. constructionhave shown little price movement.”
He cited, as examples, the producer priceindexes for concrete products, up 0.2 percentin September and 0.3 percent over 12months; lumber and plywood, down 1.3 per-cent for the month and 0.4 percent for theyear; and gypsum products such as wall-board, down 1.7 percent and 4.6 percent,respectively.
Simonson observed that the price indexfor new construction — what contractors
charge for construction projects — rose 2.2percent over 12 months for industrial build-ings, 2.6 percent for offices, 2.8 percent forwarehouses and 3.0 percent for schools.
“In light of the much steeper materialscost increases, these gains are not enough tokeep contractors solvent,” he warned.
Association officials said that in additionto the cost squeeze, the construction industrywas suffering from decreasing demand forpublic sector construction activity. They saidthat while state and local construction budg-ets will continue to contract for the foresee-able future, Washington could help offsetsome of the decline by enacting legislation tomake needed, long-term, investments inhighways, transit systems, clean water sys-tems, airports and runways.
“Given the stagnant construction bidprices, taxpayers stand to benefit ifWashington acts quickly to enact new infra-structure investments,” said Stephen E.Sandherr. “Even if construction pricesrebound in the near future, it is still a lot lessexpensive to maintain infrastructure while itis operating than to fix it once it breaks.”
PRICES from page 1
Page 48 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CRUSHING EQUIPMENT, PARTS & SERVICE
Go to www.fabickcat.com for a complete listing and description of our new and used equipment.
Portable ScreenTelsmith offers an array of inclined and horizontal portable screening plants thathave been designed to meet the variety of challenges encountered in differentapplications. Whether you need the ruggedness required when scalping largestone, to the finesse necessary for finish sizing, Telsmith has an efficient portablesolution to meet your site needs.
Model TI6060 - Impact Crusher Featuring the heavy duty Telsmith PA6060 Primary Impact Crusher, this plant isengineered for maximum productivity while processing less abrasive quarried stoneor concrete recycle. Capable of receiving 40” stone or 58" wide concrete slabs, thePA6060 has proven to be a dependable, low cost producer.
Advanced hydraulic features built into the PA6060 reduce maintenance and downtime providing increased production:
• Hydraulic Apron Adjustment: reduces maintenance through simple, fast push button controls. • Hydraulic Relief: lowers operating costs through tramp metal overload protection. • Hydraulic Tilt Feed Plate: safely clears bridging in minutes for greater uptime.
Model TJ3258 - Jaw Crusher Designed around the Telsmith 3258 hydraulic jaw crusher, the TJ3258 is specificallydesigned to deliver high production while processing hard, abrasive stone. With alarge crusher gape and width, the 3258 processes larger feed and has greatercrushing capacity than competitive models.
The 3258 jaw also incorporates unique hydraulic features proven to reduce maintenance and downtime to an absolute minimum:
• Hydraulic Adjustment: reduces maintenance through simple, fast push button controls.• Hydraulic Relief: lowers operating costs through tramp metal overload protection.• Hydraulic Chamber Clearing: safely clears the crusher in minutes for increased uptime.
DID YOU KNOW?Crushers should operate for decades. With that standard in mind, Telsmith designs, manufactures
and services a range of jaw, cone and impact crushers as well assingle-deck to quad-deck screens.
For over a hundred years,Telsmith has designed andmanufactured in the United
States of America.
Terry Hennessey800-845-9188
Fenton, Missouri800-845-9188
www.fabickcat.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 49
Call Industrial Sales At(636) 349-0200
Toll Free (866) 372-7368Email: [email protected]
VIEW COMPLETE INVENTORY (OVER 300 UNITS)
8 Locations To Serve You
Fenton, MO
Wentzville, MO
Mt. Vernon, IL
Cape Girardeau, MO
Paducah, KY
Cuba, MO
Owensboro, KY
Evansville, IN
ERB EQUIPMENT CO., INC.Sales, Rental, Parts & Services Of: John Deere, Liebherr, Bomag, NPK & Trail King
JD 644E tool carrier tractors, Complete factory remanu-facture in 2001, Marine Corps contract. Everything was
gone through (engines, axles, transmissions, pivots, etc) at that time and the
units have very low hours since the remanufactureprocess. Erb is putting on new paint, new air
conditioning units, new 4 yd buckets. Units vary in hours and pricing.
$78,000
Pricing for a unit with less than 1900 hrs, with new paint, air conditioning, hydraulic quick coupler, new bucket and good rubber. $78,000
JD 800CLC, 14' 5" Arm,36" Pads, #N4385 ..............................$475,000
JD 600CLC, 13' 5" Arm,36" Pads, #U10798 ............................$185,000
2006 JD 650J, 20”Pads, 105” Blade,#N4579 ............$60,000
JD 80C w/ GenesisGVP7, #N4456 ....................................$100,000
JD 1050C, WastePackage, 165" Blade,#N4010 ..........$225,000
NPK Hammers, All Sizes Rent orPurchase
Bomag BW205, 84"Drum, #A5331 ......................................$42,000
JD 950C, 24" Pads,146" Blade, #N4092 ............................$132,000
Exodus MX447LMaterial Handler,#A7204 ..........$485,000
Bomag BW180AD, 71"Drum, #A4597 ......................................$48,000
LIKE NEW LOADERS AT LESSTHAN HALF THE PRICE!!!
Page 50 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Dealers From 15 Countries Enjoy Morbark’s Demo Days
Morbark held its customer DemoDays event Sept. 22 and 23 at itscorporate worldwide headquarters
in Winn, Mich. The event drew more than300 customers and dealers from 15 countrieseager to see the new machines Morbark
launched during the event. Among the new equipment on display,
and in action, were the Advantage 3 highperformance chipping drum, the Morbark3800XL horizontal grinder and a sneak peekat several prototype machines yet to go into
production.The event featured factory tours, educa-
tional seminars, equipment demonstrationsand plenty of networking opportunities. Theseminar covered a range of subjects includ-ing Tier IV engines, emerging markets and
Morbark’s “Orange Watchdog,” a customdesigned communications system that mon-itors engine and machine operations andtransmits real time production, fuel con-sumption and maintenance data to a user’scomputer or telephone.
Morbark’s 3800XL Wood Hog converts trees into mulch.
(L-R): Mike Heiss of H&H Land Clearing, Morbark Regional Sales Manager EdDodak, Carmine Delliquadri of Delliquadri Landscaping, Bob Stewart of ColumbusEquipment, Mark Delliquadri of Delliquadri Landscaping, and Tim Smith ofColumbus Equipment Company catch up at the Demo Days event.
Demo Days attendees watch as a 4600XL Wood Hog goes to work.
A Morbark 1300 tub grinder powered by a Tier IV 1050 Cat engine show its muscle with a mix bag of woodwaste.
Walt Deacon (L) and Randy Record of DeaconEquipment Company, Bloomsburg, Pa., are enjoyingseeing all of the new equipment in action.
Page 52 • October 29, 2011 • www.constructionequipmentguide.com • Crawler Loaders, Dozers & Undercarriage Section • Construction Equipment Guide
Model Engine Power Weight Engine Typehp (kw) lbs. (kg)
JOHN DEERE
605C 99 (74 23,600 (10,600 J. Deere 4045T (4.5 L)655C-II 130 (97) 33,950 (15,400) Liebherr D 924 T-EA1 (6.7 L)755K 190 (141.7) 45,178 (20,492) J. Deere PowerTech PVX 6068 (6.8 L)450J 77 (57) 16,283 (7,386) J. Deere 4045H (4.5 L)550J 85 (63) 17,016 (7,717) J. Deere 4045H (4.5 L)650J 99 (74) 18,560 (8,419) J. Deere 4045H (4.5 L)700J 115 (86) 27,125 (12,307) J. Deere PowerTech 6068H (6.8 L)750J 155 (116) 34,395 (15,599) J. Deere PowerTech 6068H (6.8 L)850K 187-205 42,499-47,705 J. Deere PowerTech PVX 6068 (6.8 L)
(139.5-152) (19,295-21,684) 850K WH 205 (152) 47,258-51,403 J. Deere PowerTech PVX 6068 (6.8 L)
(21,436-23,316) 950J 247 (184) 59,255 (26,877) Liebherr D936-L A6 (10.5 L)950J WH 247 (184) 58,462 (26,518) Liebherr D936-L A6 (10.5 L)1050J 335 (250) 77,843 (35,309) Liebherr D936-L A6 (12.0 L)1050J WH 335 (249) 80,967 (36,726) Liebherr D936-L A6 (12.0 L)
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
Crawler tractors:
D3K XL74 (55.2)
17,185 (7,795)Cat C4.4 ACERT
D3K LGP74 (55.2)
17,842 (8,093)Cat C4.4 ACERT
D4K XL84 (62.6)
17,961 (8,147)Cat C4.4 ACERT
D4K LGP84 (62.6)
18,742 (8,501)Cat C4.4 ACERT
D5K XL96 (71.6)
20,741 (9,408)Cat C4.4 ACERT
D5K LGP96 (71.6)
21,347 (9,683)Cat C4.4 ACERT
D6K XL125 (93.2)
28,409 (12,886)Cat C6.6 ACERT
D6K LGP 125 (93.2)29,690 (13,467)
Cat C6.6 ACERT
D6N XL150 (111.8)
36,607 (16,605)Cat C6.6 ACERT
D6N LGP 150 (111.8)38,222 (17,791)
Cat C6.6 ACERT
D6T XL205 (153)
44,420 (20,148)Cat C9.3 ACERT
D6T XW205 (153)
45,723 (20,740)Cat C9.3 ACERT
D6T LGP 205 (153)48,024 (21,783)
Cat C9.3 ACERT
D7E235 (175)
57,441 (26,655)Cat C9.3 ACERT
D7E LGP 235 (175)62,886 (28,525)
Cat C9.3 ACERT
D8T310 (231)
84,850 (38,488)Cat C15 ACERT
D8T LGP 310 (231)85,850 (38,941)
Cat C15 ACERT
D9T410 (306)
105,600 (47,900)Cat C18 ACERT
D10T580 (433)
146,500 (66,451)Cat C27 ACERT
D11T850 (634)
230,100 (104,600) Cat C32 ACERT
D11T CD 850 (634)248,600 (113,000
) Cat C32 ACERT
Track loaders:259B Series 3
71 (53)8,934 (4,052)
Cat C3.4 DIT
279C82 (61)
9,892 (4,487)Cat C3.4 DIT
289C82 (61)
10,365 (4,702)Cat C3.4 DIT
299C90 (67)
10,730 (4,867)Cat C3.4 DIT
953D148 (110)
34,209 (15,517)Cat C6.6 ACERT
963D189 (141)
45,577 (20,220)Cat C6.6 ACERT
973D263 (196)
61,857 (28,058)Cat C9 ACERT
CATERPILLAR
Model Engine Power Weight Engine Type
hp (kw) lbs. (kg)
D21A-8EO 8,688 (3,940)40 (30)
Komatsu 4D94LE-2
D21P-8EO 9,350 (4,240)40 (30)
Komatsu 4D94LE-2
D31EX-22 18,056 (8,190)78 (58) Komatsu SAA4D95LE-5
D31PX-22 18,827 (8,540)78 (58) Komatsu SAA4D95LE-5
D37EX-22 18,298 (8,300)89 (66) Komatsu SAA4D95LE-5
D37PX-22 19,070 (8,650)89 (66) Komatsu SAA4D95LE-5
D39EX-22 20,834 (9,450)105 (79)
Komatsu SAA4D107E-1
D39PX-22 21,804 (9,890)105 (79)
Komatsu SAA4D107E-1
D51EX-22 28,043 (12,720)130 (97)
Komatsu SAA6D107E-1
D51PX-22 29,145 (13,220)130 (97)
Komatsu SAA6D107E-1
D61EX-15 37,237 (16,890)168 (125)
Komatsu SAA6D107E-1
D61PX-15 41,735 (18,930)168 (125)
Komatsu SAA6D107E-1
D65EX-16 44,355 (20,120)205 (153)
Komatsu SAA6D114E-5
D65WX-17 45,945 (20,840)205 (153)
Komatsu SAA6D114E-5
D65PX-17 47,335 (21,470)205 (153)
Komatsu SAA6D114E-5
D85EX-15 61,950 (28,100)264 (197)
Komatsu SAA6D125E-5
D85PX-15 60,960 (27,650)264 (197)
Komatsu SAA6D125E-5
D85EX-15 SL 62,245 (28,234)264 (197)
Komatsu SAA6D125E-5
D155AX-6 87,100 (39,500)354 (264)
Komatsu SAA6D140E-5
D155AX-7 87,100 (39,500)354 (264)
Komatsu SAA6D140E-6
D275AX-5 113,600 (51,530)449 (335)
Komatsu SAA6D140E-5
D275AX-5 SL 116,528 (52,856)449 (335)
Komatsu SAA6D140E-5
D375A-6 157,940 (71,640)610 (455)
Komatsu SAA6D170E-5
D475A-5E0 238,960 (108,390) 890 (664) Komatsu SDA12V140E-3
D475ASD-5E0 249,560 (113,200) 890 (664) Komatsu SDA12V140E-3
KOMATSU
VISIT WWW.CONSTRUCTIONEQUIPMENTGUIDE.COM FOR
COMPLETE CRAWLER LOADER LISTINGS.
Model Engine Power Weight Engine Typehp (kw) lbs. (kg)550H LGP 67 (50) 14,960 (6,786) Case 4-390 or 4T-390550H LT 67 (50) 14,317 (6,494) Case 4-390 or 4T-390550H WT 67 (50) 14,600 (6,622) Case 4-390 or 4T-390650L LGP 74 (55) 17,550 (7,959) Case 445TA/EHA650L LT 74 (55) 16,250 (7,371) Case 445TA/EHA Tier 3650L WT 74 (55) 16,800 (7,619) Case 445TA/EHA Tier 3 750L LGP 84 (63) 20,200 (9,157) Case 445TA/E66750L LT 84 (63) 18,900 (8,569) Case 445TA/E66 Tier 3750L WT 84 (63) 19,700 (8,955) Case 445TA/E66 Tier 3850L LGP 96 (72) 20,700 (9,402) Case 667TA/E66850L LT 96 (72) 20,200 (9,181) Case 667TA/E66 Tier 3850L XLT 96 (72) 19,600 (8,900) Case 667TA/E66 Tier 31150K LGP 118 (88) 29,365 (13,317) Case 667TA/EDJ1150K LT 118 (88) 27,858 (12,636) Case 667TA/EDJ1150K WT 118 (88) 28,667 (13,003) Case 667TA/EDJ1650L LGP 144 (107) 37,578 (17,042) Case 667TA/EDJ Tier 31650L WT 144 (107) 36,691 (16,640) Case 667TA/EDJ Tier 31650L XLT 144 (107) 35,203 (15, 965) Case 667TA/EDJ Tier 31850K LGP 199 (148) 49,450 (22,430) Case 667TA/EBF Tier 31850K LT Series 3 184 (137) 44,269 (20,080) Case 667TA/EED Tier 31850K XLT Series 3 184 (137) 46,649 (21,159) Case 667TA/EED Tier 3
CASE
Construction Equipment Guide • Crawler Loaders, Dozers & Undercarriage Section • www.constructionequipmentguide.com • October 29, 2011 • Page 53
Don’t be fooled by imitators. Thirty-plusyears’ experience building the besthydrostatic dozers makes John Deere thebrand for you. Innovations, like TotalMachine Control (TMC), allow operatorsto customize machine response andoperation to their personal preferences.J-Series Dozers deliver unsurpassedproductivity and uptime, along with thelowest possible daily operating costs.And that’s just for starters.
To learn all about John Deere J-SeriesDozers, give us a call.
Faster cycles. Higher productivity
www.holtequipment.netLouisville, KY 40223
502/253-37211-800/507-9705
London, KY 606/862-8447
1-877/231-7151
Bowling Green, KY 42101270/842-3400
1-866/528-9699
Richmond, KY859/623-2030
1-800/463-8722
3600 North Grand River AveLansing, MI 48906
517/321-8000Fax: 517/321-6275
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616/538-2400
Fax: 616/538-0449
Northeast Detroit65809 Gratiot AveLenox, MI 48050
586/727-7502Fax: 586/727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989/777-0090
Fax: 989/777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231/267-5060
Fax: 231/267-5257
West Detroit56555 Pontiac Trail
New Hudson, MI 48165 248/437-8121
1-800/457-8121
Naperville, IL 60563630/355-7150
Fax: 630/355-7173
South Holland, IL 60473708/331-6362
Fax: 708/331-7334
Rockdale, IL 60436815/730-9011765/447-6933
1-800/937-3355Fax: 815/730-9036
Rockford, IL 60012815/961-3160
Fax: 815/965-1810
Wauconda, IL 60084847/526-7700
Fax: 847/526-3565
Indianapolis, IN 46219317/544-3411
Lafayette, IN 47905765/447-6933
Fax: 765/448-9038
Bloomington, IN 47403812/333-9677
Fax: 812/333-9731
South Bend, IN 46619574/232-1461
Fax: 574/233-3324
Fort Wayne, IN 46825260/482-8576
Fax: 260/483-4057
Wichita, KS800/262-0139
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
North Platte, NE800/894-7060
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
Omaha, NE800/416-5095
Waterloo, IA800/772-2019
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Columbus, OH800/222-2010
Cincinnati, OH800/844-3734
Vandalia (Dayton), OH800/233-4228
Lima, OH800/423-7445
Canton, OH866/235-0438
Brunswick, OH800/716-9796
Painesville, OH866/800-1398
Poland (Youngstown), OH866/503-7259
Cranberry Twp, PA724/776-3636
Delmont, PA724/837-4500
www.westsidetractorsales.com www.murphytractor.com
Page 54 • October 29, 2011 • www.constructionequipmentguide.com • Crawler Loaders, Dozers & Undercarriage Section • Construction Equipment Guide
Customers, Deere Engineers TeamUp to Launch 755K Crawler LoaderBuilt from the ground up by customer collabo-
ration with Deere engineers, the new 755K crawlerloader features productivity enhancements and anew ITIV-certified diesel engine to help contrac-tors to get more work done with less noise andfewer emissions, according to the manufacturer.Capitalizing on the loader design, track systems
and comfortable cabs engineered for its dozers andK-Series loaders, the 755K is quiet, comfortableand easy to operate. Helping customers meet thelatest local emissions regulations and bid specifi-cations, it also has been updated with a John DeereITIV-certified engine.Dozens of customers worked closely with
Deere product development on the 755K. “Our customers spoke, and we listened,” said
Dan Drescher, crawler product marketing manag-er of John Deere Construction & Forestry.“The 755K incorporates several enhancements
that not only increase productivity, but respond toindividual operator preferences, such as the V-pat-tern or joystick transmission control option.There’s also a rear ripper design to help turn mate-rials, a viscous-mounted cab for noise suppression andincreased serviceability to make daily maintenance easier.”Many of the contractors that collaborated with Deere on
the 755K design also asked for a crawler loader built in the
United States. “General excavating and earthmoving contractors now
have a North American-built crawler loader tailored to theirneeds that can easily tackle a wide variety of regional terrainconditions,” Drescher said.The 755K crawler loader has powertrain and track system
technology designed for Deere’s new 850K crawler dozer.Together with an ITIV-certified engine, the crawler loaderreaches performance targets for hydraulic hp, lift capacity,drawbar pull and engine power boost.“With 190 hp, the 755K also has a higher maximum hinge
pin clearance than the competition, more dump clearanceand more static tipping load capacity,” said Drescher. “Thebottom-line result is greater productivity.”The 755K also features a number of cab improvements to
increase operator comfort. The viscous cab mountingreduces noise from vibration while double-laminated rearwindow glass and complete interior sound-dampening treat-ment significantly reduce noise levels.Other cab conveniences include a sealed switch module
with keyless start, security mode with auto shutdown and adiagnostic monitor that’s both easy to read and providesmachine condition information at a glance.“Not only is the 755K easy to operate, it’s also easy to
service,” Drescher said. “We find that the easier a unit is toservice on a daily basis, the more likely it is that the servicewill get done. That means more uptime, more productivityand more earning power for our customers.”Among several easy maintenance features on the 755K is
Deere’s NeverGrease pins in its loader bucket linkage, whicheliminate time-consuming, messy greasing.Service points also have been color-coded for easy identi-
fication, fluid sampling valves are now standard, and underthe iron, operators will find hinged belly pans and improvedaccess. Deere’s Quad-Cool system also features a tilt-outgrille and fan for simplified core cleanout, while separatehydrostatic and hydraulic reservoirs prevent the possibilityof oil cross-contamination.For more information, visit www.JohnDeere.com.
The 755K crawler loader has powertrain and track systemtechnology designed for Deere’s new 850K crawler dozer.
SR IndustriesUndercarriage Parts & Service
732-766-2109www.sriparts.com [email protected]
Milling Machine Pads & ChainsScraper Chains & Parts
ASV TracksSkid Steer Tires
Rubber TracksLoader Tires
QualityUndercarriageComponents
All Makes & Models
Track Groups Chains RollersIdlers Grousers Sprockets
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax South Bend, IN574/233-8770574/233-8775 Fax
CONTRACTORS RENTAL CORP.A division of AISwww.aisequip.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191Grand Rapids600 44th Street S.W.Grand Rapids, MI 49548616/538-2400Fax: 616/538-0449Northeast Detroit65809 Gratiot AvenueLenox, MI 48050586/727-7502Fax: 586/727-7311Saginaw4600 AIS DriveP.O. Box 253Bridgeport, MI 48722989/777-0090Fax: 989/777-1583Traverse City8300 M-72 EastWilliamsburg, MI 49690231/267-5060Fax: 231/267-5257West Detroit56555 Pontiac TrailNew Hudson, MI 48165248/437-8121Toll Free: 800/457-8121
ROAD MACHINERY & SUPPLIES COMPANYwww.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8671800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA218/741-9011800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620
Construction Equipment Guide • Crawler Loaders, Dozers & Undercarriage Section • www.constructionequipmentguide.com • October 29, 2011 • Page 55
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711800/252-2926Bolingbrook, IL630/739-7474800/826-9608Carterville, IL618/985-3399800/274-7202Marengo, IL815/923-4966800/765-2635Portage, IN219/764-8080888/764-8226Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330800/274-7230Cape Girardeau, MO573/334-5252800/274-7210Columbia, MO573/814-0083800/274-7212Palmyra, MO573/769-2056800/274-7214DePere, WI920/532-0526920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 W Main AveFargo ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND 58072800/825-04792300 Vermont AvenueBismarck ND 58504800/279-4437
Page 56 • October 29, 2011 • www.constructionequipmentguide.com • Crawler Loaders, Dozers & Undercarriage Section • Construction Equipment Guide
Komatsu’s D155AX-7 Increases Productivity, Fuel EfficiencyKomatsu America Corp.’s D155AX-7 crawler dozer is
powered by an EPA Tier IV Interim and EU Stage 3B emis-sion certified Komatsu engine. The powerful SAA6D140Eengine is rated at 354 net hp (264 kW). The highly efficient automatic transmission is matched
with the new engine to achieve productivity and maintainsthe same fuel economy as the model it replaces. Komatsu’snew crawler dozer has an operating weight of 87,100 lbs.(39,508 kg). In addition, the D155AX-7 builds on theSigmadozer blade that was introduced in 2006, but nowincorporates a new auto blade pitch function. The new dozer is equipped with the latest Komtrax tech-
nology, which sends machine operating information to asecure Web site utilizing wireless technology. Hour meter,location, cautions and maintenance alerts — to name a fewof its features — are relayed to the web application for analy-sis. The Komtrax fleet monitoring system increases machineavailability, reduces the risk of machine theft, allows forremote diagnosis by the distributor, and provides a wealth ofother information to drive business efficiency and productiv-ity. Special features of the new crawler dozer include:• EPA Tier IV Interim and EU Stage 3B Emission
Certified EngineBuilt upon Tier III technology, the SAA6D140E engine
provides high horsepower while maintaining the same lowfuel consumption as the D155AX-6. The Komatsu Tier IVInterim engine platform uses an advanced electronic controlsystem to manage air flow rate, fuel injection, combustionparameters, and after treatment functions to optimize per-formance, reduce emissions, and provide advanced diagnos-tic capability.The D155AX-7 incorporates a much larger cooling pack-
age with dramatically improved airflow to keep the new TierIV Interim engine running cool in harsh working conditions.Komatsu also has developed a hydraulically actuated
Komatsu variable geometry turbocharger (KVGT) and anexhaust gas recirculation (EGR) valve, resulting in betterprecision and air management as well as longer componentlife. The Komatsu diesel particulate filter(KDPF) has an integrated design that willnot interfere with daily operation but willkeep the operator aware of its status,according to the manufacturer.• Sigmadozer blade for pro-
ductivity The D155AX-7 is equipped
with a Sigmadozer blade, whichgives the machine a high bladecapacity of 12.3 cu. yds. (9.4cu m). Based on a new exca-vation theory, Sigmadozerimproves dozing per-formance and increasesproductivity over a con-ventional semi-U blade.The blade features afrontal design con-cept adopted fordigging and rollingmaterial at the center of theblade. The new blade increasessoil holding capacity. Digging resistance isreduced for a smoother flow of material so largeramounts of soil can be dozed with less power.
• Automatic transmission improves fuel economyThe D155AX-7 has an automatic gearshift transmission
and lock-up torque converter that reduces fuel consumptionand offers enhanced power train efficiency. The lockupmechanics of the torque converter automatically transfersengine power directly to the transmission, decreasing fuelconsumption by 10 percent. Because of the efficiency of theelectronically controlled engine and transmission, fuel con-sumption is decreased while machine power is maintained. Two gearshift modes — automatic and manual — can be
easily selected to fit the appropriate application: automaticfor general dozing and manual for dozing and ripping roughground. For maximum operating efficiency, the automaticgearshift transmission shifts to the optimal gear range basedon the working conditions and load placed. • Ergonomic joystick controls for ease of operation and
comfortKomatsu’s ergonomically designed palm command con-
trol system (PCCS) gives operators maximum control, offer-ing a relaxed posture and superb fine control to eliminateoperator fatigue. Thumb push buttons simplify transmissiongear shifting. The electronic blade and new ripper controljoystick offer excellent machine control. The ripper nowincorporates a new auto-return function to increaseoperator efficiency when ripping. Engine speedis controlled using an easy-to-operate elec-tronic throttle control dial, which eliminatesmaintenance oflinkage andjoints, accordingto the manufac-turer.
• Electronic control powertrain for smooth operationThe D155AX-7 uses an electronic control power train
system that improves operation and productivity. Powerfulturns under various work conditions are achieved with thehydrostatic steering system (HSS), which is driven by anindependent hydraulic pump and motor to transmit power toboth tracks without interruption. Counter-rotation is avail-able for minimum turning radius, providing maneuverabili-ty. When operating in adverse conditions such as unevenground, a K-bogie undercarriage system keeps the correctalignment between the rollers and links for a smoother rideas well as longer component life.• New cab designThe new crawler dozer’s comfortable working environ-
ment allows the operator to concentrate on the work at handfor increased productivity. A new standard air ride seat withheat has a 15 percent higher capacity. The large cab is inte-grated with ROPS (roll-over protection) for added side visi-bility. The dozer’s cab mounts reduce shocks and vibrationeven over adverse conditions and the interior cab decibel isa very low 75 dB for the quietest working environment. A new, high-resolution large color 7 in. LCD monitor in
the cab displays all machine information. This new genera-tion smart monitor displays the information in 25 differentlanguages providing exceptional global support. A rear viewmonitoring system is standard on the new model.For more information, visit www.komatsuamerica.com.
Komatsu’s D155AX-7 crawler dozer is poweredby an EPA Tier IV Interim and EU Stage 3B emission
certified Komatsu engine.
Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • October 29, 2011 • Page 57
Atlas Copco Introduces New Series of KT CompressorsAtlas Copco Compressors has developed
a new line of portable piston compressorsideal for light industrial use, applicationswithin the vehicle service market, as well asa wide range of construction applications.The new KT Range is a contractorseries that provides compressed air in aportable package while offering dura-bility to withstand daily wear-and-tear. “Providing dependable compressors
for a diverse base of customers andindustries remains our primary focus,”said Robert Eshelman, vice presidentof the industrial air range of AtlasCopco in the United States. “We devel-oped these products using our time-tested and proven technology thatcomplements what we believe isalready one of the most expansiveranges on the market.”The KT Range contractor series features
seven new electric and gas-powered models,delivering up to 25.3 cfm at 100 psi, in alow-profile design complete with a semi-pneumatic wheel. Each model is made in theUnited States and ready for distribution tocustomers.
Electric models range from 1.5 to 2 hp (1to 1.5 kW) and include special features suchas a start-stop pressure switch control, a fullyenclosed belt guard, tank drains and a dis-charge valve.
The gas-driven models provide additionalpower, ranging from 5.5 to 12.75 hp (4 to 9.5kW), and offer additional features beyondthose included with the electric models,including engine slowdown (pilot valve) andlow-oil level engine protection. For more information, visit www.atlas-
copco.com.
The KT Range contractor series features seven newelectric and gas-powered models.
AUTHORIZED OEM DEALER
2770 May RoadPeru, Ill 61354800-342-6072
Fax: 815-224-2538
480 Blain StreetGary, IN 46406800-852-8816
Fax: 219-977-4220
HitachiExcavators
Hitachi TrucksKawasaki
GehlEuclidTalbertProtecWaldonPerkinsHensley
Bucyrus BladesCummins
Baldwin FiltersExpanderSystems
Allied/RammerEscoIsuzuHino
SennebogenMoxy
YOUR PARTSSOURCE
Dresser(new & non-OEM)
Galion(new & non-OEM)
Wabco
Michigan
Samsung
IHCat (non-OEM)
RemanufacturedComponents
...plus many others
Visit our website: www.howelltractor.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 59
Industry’s Best Total Coverage Warranty: 3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty
H
Y U N D A
I
W
AR R A N
TY
QUALITY
www.hyundaiamericas.com
• Powerful Tier 3 Cummins Engines
• Advanced Hydraulic Technology
• Unparalleled Hydraulic Horsepower
• Heavy-Duty Design
• Industry-Best Total Coverage Warranty
• Industry-Leading Fuel Economy
• Industry-Leading Cycle Times
Waste not, expect more – Hyundai 9 Series machines are loaded.
ILLINOISBurris Equipment CompanyFrankfurt • 815-464-6650 Ingleside • 815-363-4100Waukegan • 847-336-1205
Diamond Equipment17035 N. Illinois Hwy. 37Mt. Vernon, IL 62864
618-242-2273800-388-6396
Fax: 618-242-9161
Diamond Equipment1060 Diamond Ave.Evansville, IN 47711
812-425-4428dmfortune
@diamondequipment.comwww.diamondequipment.com
2000 Harlan DriveTerry Haute, IN 47802
812-299-4747888-343-4747
Fax: 812-299-3687
Hardings Heavy Equipment109 W. Commercial Ave.
Lowell, IN 46356219-696-8911
KANSASThe Victor L. Phillips Co.
4100 Gardner Ave.Kansas City, MO 64120
816-241-9290Garden City • 620-275-1996 Topeka • 785-267-4345 Wichita • 316-838-3346
KENTUCKYDiamond Equipment1046 Lovers Lane
Bowling Green, KY 42103270-781-1061800-489-1061
Fax: 270-781-0907
MICHIGANMidland Engine
Midland • 989-631-4608
MINNESOTATitan Machinery
Hermantown • 218-727-3038 Shakopee • 952-445-5400
MISSOURIThe Victor L. Phillips Co.
4100 Gardner Ave.Kansas City, MO 64120
816-241-9290Brookline Station • 417-887-2729
Joplin • 417-781-8222
WISCONSINTitan Machinery
La Crosse • 608-788-1025
INDIANA
Page 60 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Introducing the Kubota SVL Series. The new standard for productivity, comfort and speed on the worksite – with the proven power of a Kubota turbo-charged diesel engine. Everything you value for versatile, multi-terrain work. They’re all Kubota designed, engineered and manufactured – the compact track loaders only Kubota could build. Call today for a demo.
www.kubota.comOptional equipment may be shown.
©Kubota Tractor Corporation, 2010
ARNOLD’S OF KIMBALLwww.arnoldsinc.com
701 State Hwy 55 E • Kimball, MN 55353320/398-3800
Fax: 320/398-6900
ARNOLD’S OF MANKATOwww.arnoldsinc.com
1715 Howard Drive • No. Mankato, MN 56003507/387-5515
Fax: 507/387-6449
BURRIS EQUIPMENT CO.
www.burrisequipment.com2216 N. Green Bay Rd.
Waukegan, IL 60087847/336-1205
Fax: 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100
10351 W. Laraway Rd.Frankfort, IL 60423
815/464-6650
HAUG-KUBOTA, LLC.www.haugkubota.com
East Highway 123585E. Hwy 12
Willmar, MN 56201320/235-2717
Fax: 320/235-2771
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 61
®
POWERFUL SOLUTIONS
act your full service dealer for more informationContact your full service dealer for more informationContact your full service dealer for more informationContact your full service dealer for more information
The Power of Product and Support
www.takeuchi-us.com
Takeuchi understands the needs of the industry and responds with solutions. Track loaders feature high sprocket double reduction planetary reduction final drives which provide the most efficient use of power for more traction and digging force.Wheel loaders feature pushbutton 100% front and rear axle differential lock which provides immediate traction for superior digging and lifting power.Excavators feature pressure compensating piston pumps which provide smooth multi-function operation with unmatched break- k-out force and control.
Driven to provide maximum functionality and performance.
Try a Takeuchi and feel the power
McCannIndustries543 S. Rohlwing RdAddison, IL 60101630-627-0000
250 E. North FrontageRd.Bolingbrook, IL 60440630-739-7770
2350 S. Laflin St.Chicago, IL 60608312-942-9200
4701 West 137th StreetCrestwood, IL 60445708-597-3110
1133 Indianapolis Blvd.Schererville, IN 46375219-865-6545
1360 N. Rand Rd.Wauconda, IL 60084847-526-9444
4102 W. Crystal Lake Rd.McHenry, IL 60050815-385-0420www.McCannOnline.com
Luby EquipmentServices2300 Cassens DriveFenton, MO 63026636-343-9970
199 Airport RoadCape Girardeau, MO63702573-334-9937
8853 Petrov DriveCaseyville, IL 62232618-397-9971
4375 Camp Butler RoadSpringfield, IL 62707217-744-2233
2625 North 24th St.Quincy, IL 62305217-222-5454www.lubyequipment.com
Trenchers Plus2309 West Highway 13Burnsville, MN 55337952-890-6000
2210 26th St. SouthMoorhead, MN 56560218-477-3447
Indy Equipment6500 Schaff Rd.Independence, OH 44131216-446-3200Fax: 216-573-7712
11159 Royalton Rd.North Royalton, OH44133440-237-9040
35350 Chester Rd.Avon, OH 44011440-832-7133www.indyequipment.com
MidwestUndergroundSupply1106 32nd St. SWBondurant, IA 50035877-967-5656
8844 S. 135th St. Omaha, NE 68138888-407-6500
27285 Ironworks Rd.Harrisburg, SD 57032605-368-9880
Star EquipmentLtd.1401 2nd AvenueDes Moines, IA 50314515-283-2215Fax 515-283-0295800-369-2215
2625 W. Airline Hwy.Waterloo, IA 50703319-236-6830Fax 319-236-6834800-791-9249
2950 6th Street SWCedar Rapids, IA 52404319-365-5139Fax 319-365-6726800-728-5139
2100 E. Lincoln WayAmes, IA 50010Ph: 515-233-9500Fax: 515-233-9505866-856-2312
Page 62 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
t h e C O L O R o f Q U A L I T Y
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities.running, greaterengines while maximizing your productivity with smooth-Be fuel efficient with clean-burning Interim T
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities.-than-ever horsepower greater -
engines while maximizing your productivity with smooth-Be fuel efficient with clean-burning Interim T
Tier 4-certified
new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting
digging force, and lift capacities., arm force,-than-ever horsepower
engines while maximizing your productivity with smooth-ier 4-certified ning Interim T
engines while maximizing your productivity with smooth-ier 4-certified
.hitacwwww.hitachiconstruction.com
new crop of Dash-5 excavators.
t h e C O L
.hitachiconstruction.com
new crop of Dash-5 excavators.
A L I T Y
new crop of Dash-5 excavators.
UO R o f Qt h e C O L
A L I T Y
WEST SIDE TRACTOR SALES CO.
www.westsidetractorsales.com1400 W. Ogden Ave.Napervile, IL 60563
630-355-7150Fax: 630-355-7173
310 W. 162nd St.South Holland, IL 60473
708-331-6362Fax: 708-331-7334
3110 Prairie Rd.Rockford, IL 61102
815-961-3160Fax: 815-965-1810
1560 N. Old Rand Rd.Wauconda, IL 60084
847-526-7700Fax: 847-526-3565
600 Walnut CourtRockdale, IL 60436
815-730-9011Fax: 815-730-9036
JDE EQUIPMENT www.jdeequip.com651 AIS Drive S.W.
Grand Rapids, MI 49548616-530-2000 • 800-664-3303
West Detroit56555 Pontiac Trail
New Hudson, MI 48165248-437-8121• 800-457-8121
Traverse City777 US 31S
Traverse City, MI 49685231-943-3996 • 800-968-1110
RDO EQUIPMENT CO.www.rdoequipment.com
12500 DuPont Ave. S.Burnsville, MN952-890-8880
1910 LorRay Dr.North Mankato. MN
506-387-1836
1236 60th Ave. N.W.Rochester, MN507-282-8888
6700 Highway 10 NWSauk Rapids, MN320-259-6222
Wichita, KS 67217800/262-0139
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
North Platte, NE800/894-7060
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
Omaha, NE800/416-5095
Waterloo, IA800/772-2019
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Columbus, OH800/222-2010
Cincinnati, OH800/844-3734
Vandalia (Dayton), OH800/233-4228
Lima, OH800/423-7445
Canton, OH866/235-0438
Brunswick, OH800/716-9796
Painesville, OH866/800-1395
Poland (Youngstown),OH
724/837-4500
MURPHY TRACTOR & EQUIPMENT CO.www.murphytractor.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 63
Buck & Knobby Equipment Co.6220 Sterns Rd
Ottawa Lake, MI 49267734-856-2811
Custom Truck & Equipment7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com
Paint Valley Equipment10550 Twp Rd. 262
Millersburg, OH 44654877-774-0081330-674-4031
Titan Machinery Inc.6304 Hwy. 101
Shakopee, MN 55379952-445-5400800-795-9274
Fax: 952-445-036516200 Hwy 10
Elk River, MN 55330763-262-44744311 Haines Rd.
Hermantown, MN 55811218-727-3038
N1626 Wuensch RoadLa Crosse, WI 54601
608-788-1025
Roeder Implement Inc.2550 Rockdale Rd.Dubuque, IA 52003563-557-1184
Fax: 563-583-1821
Vermeer Midwest2801 Beverly Dr.Aurora, IL 60502630-820-3030
PO Box 224Eureka, IL 61530309-467-3716
1801 179th Ave.Moline, IL 61244309-751-9540
13402 Britton Park Rd.Fishers, IN 46038317-842-1040
3566 Citadel CircleNewburgh, IN 47630
812-490-4400
3310 West Coliseum Blvd.Fort Wayne, IN 46808
260-484-2494
PO Box 27317550 Chesterfield Airport Rd.
Chesterfield, MO 63006636-532-2332
1005 Thorez Rd.Jackson, MI 49201517-750-3783
1196 A Franklin St.Marne, MI 49435616-677-5900
Vermeer of IowaPO Box 168-661 Hwy T14
Pella, IA 50219641-628-2000
Vermeer Siouxland4858 D Ave.
Marcus, IA 51035712-376-2310
Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444
Page 64 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
James McHugh Construction Co. WorkersGet Lunch Break From McCann Industries
Utility work continues in the Washington trolley tunnel.
James McHugh Construction Co. workers line up for a lunch provided by McCannIndustries.
(L-R): McCann Industries Vice President of Sales & Marketing Jim McCann, Craig Frier ofSika Corp. and Mike Lally, ironworker superintendent of James McHugh Construction Co.,talk about phase II of the Wacker Drive project.
McCann Industries Sales Representative Damian Allen (L) and James McHughConstruction Co. Superintendent Dale Hendrix share some thoughts about theWacker Drive project. Hendrix has been with the James McHugh Construction Co.for 51 years. Phase II of the Wacker Drive job is well under way.
(L-R): Sid Adema of James McHugh Construction Co., Damian Allen ofMcCann Industries, and Dale Hendrix, Rich Phelan and Dave Steffenhagenof James McHugh Construction Co. share a few laughs after the lunch pro-vided by McCann Industries.
WACKER from page 12
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 65
Volvo Construction Equipment offers equipment that’s ideal for quarry work. Our wheel loaders feature our exclusive OptiShift technology for exceptional fuel effi ciency, while our articulated haulers are designed for quick transport of aggregates. With the support of over 300 dealer locations across North America, the result is greater productivity for your crew – and a higher earning potential for you.
Learn more about OptiShift by contacting a Volvo dealer near you. Visit volvoce.com/na today.
Let’s Work.maximize efficiency. minimize costs.
28775 Beck Rd.Wixom, MI 48393
248/449-6700
Muskegon, MI231/798-8754
Kentwood, MI616/698-2960
Battle Creek, MI269/965-1269
Romulus, MI734/641-8238
Saginaw, MI989/752-9400
Sterling Hts, MI586/977-6000
Zeeland, MI616/748-4108
Lansing, MI517/272-5033
Wixom, MI (Cons.Division)
248/356-5200
Byron Center, MI616/878-7450
12500 S. Cicero Ave.Alsip, IL 60803708/389-7700
Villa Park, IL630/530-7600
Rockford, IL815/227-0555
East Peoria, IL309/694-4455
Springfield, IL217/789-0351
Evansville, IN812/867-6661
Fort Wayne, IN260/482-3681
Indianapolis, IN317/247-9125
Corbin, KY606/528-9440
Louisville, KY502/456-4050
Prestonsburg, KY606/874-2104
St. Louis, MO314/487-8925
McALLISTEREQUIPMENT CO.
Page 66 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
With powerful Yanmar diesel engines, the 3640E and 4240E models are little giants that maneuver easily in tight spaces and handle tough jobsite challenges.•
All-Tach• ®
•
•
TIGHT SPOTSTIGHT SPOTSEXCELSin
Dealer Imprint
gehl.com
Custom Truck &Equipment7701 Highway 24
Kansas City, MO 64125800/861-1065
www.cte-equipment.com
Howell TractorCompany
Peru, IL800/342-6072
Gary, IN800/852-8816
Holt EquipmentLouisville, KY
800/507-9705Bowling Green, KY270/842-3400
London, KY877/231-7151Lexington, KY
800/463-8722
Elder Ag and TurfEast Palestine, OH330/426-2166
www.johndeere.com
You asked. We delivered. Our D-Series SkidSteers are loaded with customer-recommendedenhancements, like larger operator stations,quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options suchas electrohydraulic joysticks, variable boomand bucket speed settings, and more than 100 attachments to let you take on more tasks.
Packed full of best-in-class productivity anduptime-enhancing features, the D-Series aredestined to become owner and operatorfavorites. Ask for a demo today.
The Difference is in the D-tails.
www.erbequipment.com
Fenton, MO 63026636/349-0200
Cape Girardeau, MO 63703573/334-0563
Foristell, MO 63348636/673-2131
Cuba, MO 65453573/885-0500
Mt. Vernon, IL 62864618/244-6800Paducah, KY270/554-1131Owensboro, KY270/684-2339Evansville, IN812/473-0484
www.lec1.com
8331 Meade Springer Rd.Ashland, KY 41102
606/928-3477195 Sykes Blvd.
Pikeville, KY 41502606/432-0321
105 Tennis Center Dr.Marrietta, OH 45750
740/373-525560611 Hulse Dr.
Cambridge, OH 43725740/439-2747
5775 US Rt. 23 SouthChillicothe, OH 45601
740/663-5300
www.westsidetractorsales.com1400 W. Ogden AveNaperville, IL 60563
630/355-7150Fax: 630/355-7173South Holland, IL
708/331-6362Rockdale, IL815/730-9011Wauconda, IL847/526-7700Rockford, IL
815/961-3160
Sioux City, IA 800/352-4693Waterloo, IA 800/772-2019Dodge City, KS800/794-0172Great Bend, KS620/792-2748Topeka, KS
785/233-0556 Ulysses, KS
620/356-1071Wichita, KS
800/262-0139Kansas City, MO
888/306-3434
Springfield, MO888/306-2656Gering, NE
800/205-6784Grand Island, NE
800/868-4017Lincoln, NE
800/416-5518North Platte, NE800/894-7060Omaha, NE
800/416-5095Brunswick, OH800/716-9796Canton, OH
866/235-0438
Cincinnati, OH800/844-3734Columbus, OH800/222-2010Lima, OH
800/423-7445Poland, OH
866/503-7259Vandalia, OH800/233-4228
Cranberry Twp, PA724/776-3636Delmont, PA
724/837-4500
www.murphytractor.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 67
Page 68 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
B & W Equipment Company, Inc.3520 Meyer RoadFort Wayne, IN 46806800-242-4819www.bandwequipment.com
Construction Machinery Company2911 S. English Station Rd.Louisville, KY 40299502-267-4020www.cmcky.com
2235 Ragu DriveOwensboro, KY 42303270-683-2000www.cmcky.com
Newman Equipment, Inc.1315 Terminal RdIndianapolis, IN 46217317-781-8100www.newmanequip.com
Pat Kelly Equipment Company5920 N. Lindbergh Blvd.Hazelwood, MO 63042314-895-9500www.patkelly.com
Steve’s Equipment Service, Inc1400 Powis Road
Swiderski Equipment, Inc. – Since 1925Mosinee, WI • 715-693-3015Wausau, WI • 715-675-2391Thorp, WI • 715-669-5255Antigo, WI • 715-623-4668Waupaca, WI • 715-258-3266Appleton, WI • 920-757-9363
West Chicago, IL 60185630-231-4840www.sesequip.com
6915 West Chicago AveGary, IN 46406219-949-9595www.sesequip.com
*
Pat Kelly EquipmentCompany5920 N. Lindbergh BlvdHazelwood, MO 63042314-895-9500www.patkelly.com
Steve's EquipmentService, Inc.1400 Powis Rd.West Chicago, IL 60185630-231-4840www.sesequip.com
6915 West Chicago Ave. Gary, IN 46406219-949-9595www.sesequip.com
Page 70 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
2011 ICUEE Attracts Nearly 16K Attendees to Louisville
Todd Jurjevic of Minnich Concrete Vibrators & DowelPin Drills enjoys the weather while greeting attendees.
Caterpillar National Account Program Manager JasonConklin (L) gives Paul Moore of Swift & Son,Shelbyville, Ind., a few pointers on operating a Cat420E backhoe.
(L-R): Case Construction’s Brand Manager RobMarringa, Manager of Corporate Accounts RobManthei, and Product Sales Training Manager DavidPariso are ready to talk about the Case 221 Series 3wheel loader with show goers.
Paladin Dealer Development Manager Dave Aldrich demonstrates Paladin’s newprototype 655 rock trencher.
(L-R): Mitch Smith of Vermeer Midwest talks about Vermeer’s RTX 500 trencherwith Timothy Weygandt of Comed, Chad Van Soelen of Vermeer and MichaelRadziewicz of Comed.
(L-R): John Graber and Craig Zafaras (in cab) of All Equipment Repair try outVolvo’s ECR48C compact excavator while Volvo’s Andy Capps and Chris Price pointout the machine’s features.
(L-R): JCB’s Meg Albertson and Neil Smith get some assistance from WalshEquipment’s Mike Sarver at the JCB equipment display.
ICUEE from page 8
see ICUEE page 92
SECT IONPaving
Terex Bid-Well 4800 Paver Based on 50 Years’ ExperienceCapable of paving bridges, streets and highways, today’s
Terex Bid-Well 4800 paver from Terex Roadbuilding drawsfrom 50 years of concrete paving experience. The 4800 fea-tures a 48 in. (91.4 cm) truss and all-welded steel construc-tion to maximize frame strength and minimize weight. Theautomatic roller paver is capable of paving widths of morethan 170 ft. (51.8 m), optimizing machine flexibility to pavea wide variety of bridges. Powered by a 23 hp (17 kW) gas engine, the 4800’s
paving carriage performs four concrete deck finishing func-tions. Dual, double-flighted augers meter the concrete tomaintain a consistent head of material in front of the carriage.The 11.5 in. (29.2 cm) Rota-Vibe system uniformly consoli-dates the top 2.5 in. (6.3 cm) of concrete to facilitate sealingof difficult-to-finish designs. Dual, 5 ft. (1.5 m) long pavingrollers finish the concrete surface, while a trailing drag pansystem seals and textures the deck. Positioned on top of the frame, the operator’s console of
the Terex Bid-Well 4800 is designed for operator visibilityand provides easy access to machine and carriage move-ment. From the console, the operator controls machine trav-el speed, power up and down leg adjustment, manual shiftfor carriage reversing and carriage travel speed. Operatorsalso control a number of options without leaving the console,including power crown adjustment, internal concrete vibra-tion system, power leg widening and carriage/drag pan fog-ging system. The standard paver rides the rails on four machine travel
bogies, offering a 4 ft. (1.2 m) wheel base, and four heavy-duty, 6 in. (15.2 cm) tubular legs with hydraulicallyadjustable height. To increase paving versatility, the 4800provides up to 15 ft. (4.7 m) of leg travel to each side toaccommodate width changes on the fly. The Terex Bid-Well 4800 paver on display at World of
Concrete in Las Vegas, Nevada included a number of differ-ent options, designed to maximize paving versatility. The
available paving carriage/drag pan fogging system atomizesthe water to produce a true, light fog. This keeps the concretefrom drying too quickly to reduce cracking and produce astronger surface. When operating the paver in confined construction zones,
the optional swing leg design offers zero-clearance paving.These variable-position, offset legs attach to the paver’smain frame and provide an additional length of 2 ft. (0.61 m)for variable-width paving. The available pivoting leg option for the 4800 saves con-
tractors time and money when paving bridges with crossslopes of more than 8 percent. This optional feature pivotsthe leg to a true vertical position when paving supereleva-tions, decreasing the side forces on the rail system and reduc-ing the need for additional shoring. Also equipping themachine with available neoprene bogies provides better trac-tion when paving superelevations and grades. For more information, visit www.terex.com.
Pages 71-81
Terex Bid-Well 4800 features a 48 in. (91.4 cm) truss and all-welded steelconstruction to maximize frame strength and minimize weight.
Page 72 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Power Pavers Unveils SF-1700 Compact Slip-Form Paver
Power Pavers has a new compact slip-form paver — thePower Paver SF-1700. “With the ability to pave up to 7.5 meters wide, the SF-
1700 was developed to react to the contractor demand fortwo-pass paving in many highway applications. Theresponse to the SF-1700 has been excellent and we are get-ting great reports from our customers who have put them towork,” said Fred Hite, general manager of Power Pavers Inc. “In fact, we placed machines in three countries within a
month of the machine’s introduction.” The frame of the SF-1700 is based on Power Paver’s cur-
rent leading machine, the SF-2700. By reducing the enginesize and main frame width Power Pavers was able to makethe SF-1700 a more compact, economical alternative to con-tractors desiring to pave highways in two passes. “In many developing countries, concrete supply is an
issue, so paving in two passes is more practical than onepass,” explained Hite. Standard equipment on the SF-1700
includes a 160 hp (119 kW) Cummins engine, spread augerand tamper bar, and 12 Wyco vibrators.Power Pavers Inc., a subsidiary of Power Curbers Inc.,
manufactures a full line of slip-form concrete equipment foruse in residential, highway and airport paving. Based inCedar Falls, Iowa, in addition to slip-form pavers, PowerPavers offers form pavers, placer/spreaders, and texture/curemachines to paving contractors. For more information, visit www.powerpavers.com.
By reducing the engine size and main frame width, the SF-1700 is a morecompact size than the SF-2700. The frame of the SF-1700 is based on Power Paver’s current leading machine, the SF-2700.
Dynapac C-Series Goesto Work on Smaller JobsThe Dynapac series of small tan-
dem rollers are designed primarilyfor small-scale compaction work,such as driveways, bicycle paths,small roads and small parkingareas.The CC800, CC900 and
CC1000 models offer an operatingweight of approximately 1.6 tons(1.4 t). The series of machinescome in drum widths of 31, 35 and39 in. (78.7, 89 and 99 cm). Themachines are fitted with a centrallifting eye that is designed to allowfast and simple loading for trans-portation. The folding ROPS isintended to keep the transportheight to a minimum and workingunder obstructions.Equipped with water-cooled,
three-cylinder Perkins 23.5 hp(17.5 kW) diesel engines, the smalltandem rollers offer standardpropulsion and vibration on bothdrums. A switch to turn off vibra-tion on the front drum is standard.
A rear drum shut-off can be addedas an additional option.The 50-gal. (189 L) water tank
and the Wutomatic Water Control(WAC) system is intended to max-imize periods of time betweenrefills. The WAC system used onthe CC800, CC900 and CC1000machines also is used on largerDynapac asphalt machines. Themachines are equipped with a newtype of self-draining sprinkler tubeand nozzles, which are intended tominimize the risk of ice plugs incold weather conditions, accordingto the manufacturer.A vibration-damped operator’s
stand and an ergonomically posi-tioned step are intended to makethe machines driver-friendly.Service intervals have been extend-ed and the machines are equippedwith a maintenance-free steeringhitch and steering cylinder. For more information, visit
www.dynapac.us.The CC800, CC900 and CC1000 models offer an operating weight of approximately 1.6 tons (1.4 t).The series of machines come in drum widths of 31, 35 and 39 in. (78.7, 89 and 99 cm).
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 73
THE COMPACTION EXPERTS
Our rollers are pretty basic.Basically perfect.BOMAG improves on perfection with the BW120AD-4 roller.Want a roller that will fi nish the job better, faster and more effi ciently? Then you want the BW120AD-4 from BOMAG. We took the top tandem-drum vibratory roller in its class and made it even better: A more powerful 33.8-hp diesel engine, a 14-percent faster working speed, and a larger operator’s platform with standard laterally sliding seat for better visibility. Improving perfection? That’s just the basics with BOMAG.
To do the best job, you need the best equipment.To learn more visit www.bomag-americas.com,
or call 1-800-78-BOMAG today.
1400 W. Ogden Ave.Naperville, IL 60563
630/355-7150
Rockford, IL815/961-3160
South Holland, IL708/331-6362
Wauconda, IL847/526-7700
Rockdale, IL815/730-9011
200 Erb Industrial Dr.Fenton, MO, 63026
636/349-0200
Foristell, MO636/463-2500
Cape Girardeau, MO573/334-0563
Cuba, MO573/885-0500
Owensboro, KY270/684-2339
Paducah, KY270/554-1131
Evansville, IN812/473-0484
Mount Vernon, IL618/244-6800
Page 74 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Serving the Asphalt Industry for 25 YearsServing the Asphalt Industry for 25 Years
1981 Blaw Knox RW100 road widener,broom, hydrostaticdrive, J.D. diesel engine
1995 Rosco SPRH-Hchip spreader, hydrostatic drive,Cummins diesel engine,13 ft 6 inch spread hopper
2002 Rosco Tru-Pac915 rubber tire 9wheel roller,Cummins 3.3L diesel engine, ROPScanopy, water system w/plasticwater tank, skirtsaround tires
1999 Rosco MaximizerII distributor, 1750 gallons, EZ-1S comput-er w/1 ft cut-offs, dieselheat, 14 ft spray bar, IH 4700 w/DT466Ediesel engine, 6+ trans(7 spd- 6 plus lowgear), air brakes
New Marathon TPS250Ttack distributor, trailermounted, Honda 5.5hpgas engine, 10GPMpumping system, 250gallon capacity, 5 ftspray wand w/40 fthose, 10" filler lid, hosereel, electric brakes
2005 Blaw Knox PF3200 paver, OmniIIIA screed 10-18 ft,Cummins dieselengine, power crown& slope, smoke eater
2003 Hypac C530AHpneumatic rubber tireroller, Cummins 3.3Ldiesel engine, co comats, water system,canopy
Marathon KERA260HD rubberized melting kettlefor crack sealing and water-proofing, 260 gal., 26hp liquid cooled 3-cyl Kohler dslengine, 2 dsl burners, auto.temp. control, hyd. agitation,patented 18 ft oil-heatedhose sys., heated applicatorwand w/ 3" O.D. swivel seal-ing shoe, overnight heating,80 cfm air compressor w/40ft air hose, strobe light
Powermoon 2000Wballoon light, lights20,000 sq. ft, no glare,No harsh shadows,wide light distribution,High portability – Smallstorage Solid & robust,perfect for pavermounts, safety andwork efficiency at nightincrease enormously!
866-430-75393517 Wayne White Rd., Climax, NC 27233
Sales: [email protected]: [email protected]
www.jfwequipment.com
villeperaN
IL,ville
SAL
ESSAL - NTREENT
LATTA - TS RAPPA
TS - ICEVVICERSEER
per063 - 553
d,orkfforocR518 - 169 - 6013
nd,llao HthouS708-331- 6263
ondaWa
,5- 5071
IL60
ILnd,
IL
ondacuWaau748 -526-77
kdaocR518 - 073
IL,onda0077
IL,lekda0- 1109
etherevath
Sideest...WWestkroWWo
les Saorr SaactrTTrSide
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 75
Calder Brothers Corporation250 E. Warehouse Ct. | Taylors, SC 29687
phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com
Discover More Ways Mauldin Can Help You Become a Master of the Mat.
Mauldin’s 1750-C Super
Paver is ready for fast andhard action. Unmatched performance and durabilityset this heavyweight apart from all others.
Check the details atwww.4aMauldin.com.
M413XT
MG622
PrecisionSpray
1400 Cecil Ave. • Louisville, KY 40211(502) 774-4441• Fax: (502) 778-3543
www.whayne.comAshland, KY(606) 928-3444
Bowling Green, KY(270) 843-3275Corbin, KY
(606) 528-3140Evansville, IN(812) 425-4651Hazard, KY
(606) 439-4040
Hopkinsville, KY(800) 494-2963Lexington, KY(859) 254-2756Paducah, KY(270) 443-3631Pikeville, KY(606) 437-6265
Whayne Supply Co.Finkbiner Equipment Co.15 W 400 No. Frontage Rd.
Burr Ridge, IL 60527(630) 654-3700
Fax: (630) 654-3792www.finkbinerequipment.com
Mohican ValleyEquipment2349 Twp. Rd 257
Jeromeville, OH 44840(419) 368-7020
www.mohicanvalleyequipment.com
Miller-Bradford &Risberg, Inc.
W250 N6851 Highway 164Sussex, WI 53089(262) 346-5700
Fax: 262-246-5719Madison, WI(608) 222-9191Eau Claire, WI(715) 832-3443DePere, WI
(920) 338-5800Abbotsford, WI(715) 223-2381Negaunee, MI(908) 475-4181
www.miller-bradford.com
Page 76 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Sakai’s Compact Roller LineUtilizes 4000 VPM FeatureSAKAI America’s 300 Series rollers con-
sist of three small double drum steel and twocombination steel/pneumatic tire roller mod-els, all of which boast a high frequency of4,000 vpm. This translates into higher oper-ating speeds, while still maintaining theindustry standard of 10 to 12 impacts perfoot. The higher operating speeds and high fre-
quency of the 300 Series allow contractors toget more compaction work completedbefore the asphalt cools and to achieveexcellent compaction quickly. This processincreases productivity and along withmachined drums and beveled drum edges,leaves a smooth, well compacted result.The SW300-1, SW320-1 and SW330-1
double drum rollers havedrum widths of 39, 47 and51 in. (99, 119 and 129.5cm) respectively and are ide-ally suited for smaller scalejobs like municipal roads,driveways, parking lots,sports courts and bicyclepaths.SAKAI’s TW320-1 and
TW330-1 rollers combineboth vibratory drum andpneumatic tires. These mod-els feature 47 and 51 in.vibratory drums respectivelyon the front end for fast com-paction; and the kneadingaction of pneumatic tires onthe rear for surface finishing.All five models feature a
hydrostatic drive on bothends of the machine. Thesedual drive systems ensure that materials willalways be pulled beneath the drums or tiresto ensure compaction, while avoiding shov-ing and checking of the mix. Also standardon all five models, is a powerful, yet fuel-efficient 35 hp (26 kW), Kubota D1703-M-ET01 water-cooled diesel engine that fullycomplies with the current U.S. emissionstandards.The 300 Series rollers custom designed
shock isolators reduces service and mainte-nance time on the roller by keeping vibrationmoving toward the material and away fromcritical components and the operator, reduc-ing fatigue. In addition to the shock isolationsystem, the vibrator bearing is designed withan oil bath lubrication system that minimizesmaintenance, according to the manufacturer.SAKAI’s bench seat system offers opera-
tor comfort as well as 360 degree visibilityand view of both drum edges. The opera-tor’s station is accessible from both sides of
the machine and controls are convenientlylocated and within reach of the operator forease of use.SAKAI holds high safety standards and
provides seatbelts and ROPS as standardfeatures on all rollers in North America. TheROPS also are foldable for ease of transportand storage of the rollers. In addition tothese safety features, SAKAI also providesmultiple braking systems that ensure opera-tor safety. A hydrostatic service brake islocated on the forward- reverse lever, a wetdisc, spring-applied, hydraulically-releasedparking brake is located on the instrumentpanel and there’s an emergency footbrake,which activates both brakes simultaneously.Serviceability is quick and easy on the
300 Series rollers. A fully opening enginehood allows for easy access to the engine,radiator and hydraulic components. Thehydraulic system has been designed withconveniently located pressure gauge portsfor easy access. SAKAI also has incorporated its water
spray system to the 300 Series rollers. Thissystem features long-lasting brass spray noz-zles that can be easily changed by hand, atriple filtration system to prevent debris fromclogging the system, emergency back-uppumps and a drainage system for clean-outand winterization. SAKAI also offers arelease agent to keep asphalt from sticking tothe pneumatic tires of the TW320-1 andTW330-1 models during warm-up. Thisrelease agent is stored in a separate tank anduses an independent spray bar and pump tokeep it from mixing with the main watertank and spray system. For more information, call 1-800-323-
0535, or visit www.sakaiamerica.com.
SAKAI America’s 300 Series rollers consist of threesmall double drum steel and two combinationsteel/pneumatic tire roller models, all of which boast ahigh frequency of 4,000 vpm.
Road Machinery & SuppliesSavage, MN952/895-9595800/888-9515
Duluth, MN218/727-8671800/888-9535
Grand Rapids, MN218/328-5916800/459-5916
Des Moines, IA218/741-9011800/555-1445
Sioux City, IA712/252-0538800/633-9104
Cedar Rapids, IA319/363-9655800/616-6615
McAllister Equipment Co.12500 S. Cicero Ave.
Alsip, IL 60803708/389-7700
Villa Park, IL630/530-7600
Rockford, IL815/227-0555
East Peoria, IL309/694-4455
Springfield, IL217/789-0351
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 77
Dynapac USA3700 East 68th Avenue
Commerce City, CO 80022
Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us
Authorized Dynapac Dealers
Brooks Tractorwww.brookstractor.com
Sun Prairie, WI608.837.5141
Milwaukee, WI414.462.9790
West Salem, WI608.786.2644De Pere, WI920.336.5711
Casey Equipmentwww.casey-equipment.com
Arlington Heights, IL847.437.8686Lemont, IL
630.257.1261Rockford, IL815.332.8222
Columbus Equipment Company
www.columbusequipment.com
Columbus, OH 614.443.6541Toledo, OH
419.872.7101 Cincinnati, OH513.771.3922
330.659.6681 Cadiz, OH
740.942.8871Dayton, OH937.879.3154 Canton, OH330.453.4521
Painesville, OH 440.352.0452Piketon, OH740.289.3757
Construction Machinery Company
www.cmcky.comOwensboro, KY
877.683.2262Louisville, KY866.901.2262
Diamond Equipmentwww.diamondequipment.com
Bowling Green, KY270.781.1061Evansville, IN812.425.4428Mt. Vernon, IL618.242.2273
Terre Haute, IN812.299.4747
DMI Diesel Machinery, Inc.
www.dieselmachinery.comSioux Falls, SD
605.336.0411Aberdeen, SD605.725.4364
Rapid City, SD605.348.7438
Hayden - Murphy Equip. Co.
www.hayden-murphy.comMinneapolis, MN
952.884.2301
Logan Contractors Supplywww.logancontractors.com
Omaha, NE402.339.3900
Des Moines, IA515.253.9048Bettendorf, IA563.441.2949
Luby Equipmentwww.lubyequipment.com
Fenton, MO636.343.9970
Quincy, IL217.222.5454O’Fallon, MO636.332.9970
Cape Girardeau, MO573.334.9937
MacDonald Machinerywww.macdonaldmachinery.com
Lafayette, IN765.742.2080
Fort Wayne, IN260.747.1561
South Bend, IN574.271.0800
Indianapolis, IN317.856.3000
NCS Equipmentwww.ncsequipment.info
Hastings, NE402.462.2252Kearney, NE308.237.0777
Grand Island, NE308.398.0640Lincoln, NE
402.466.1550Bertrand, NE308.472.5077
Columbus, NE402.562.1550
Titan Machinerywww.titanmachinery.com
Bismarck,ND701.250.7925
Minot, ND701.852.3188
Fargo, ND701.237.3333
The Victor L. Phillips Co.www.vlpco.comTopeka, KS
785.267.4345Wichita, KS
316.838.3346Garden City, KS
620.275.1996Kansas City, MO
816.241.9290Joplin, MO
417.781.8222
417.887.2729
Dynapac’s CC624HF double-drum high-frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features:
30,000-pound operating weight 84-inch wide, 60-inch diameter drum Compaction vibratory force of 23,850 to 37,350 lbs Static linear load of 158 lbs/in Vibration frequency from 3,060 to 4,020 vpr Powered by a 152 hp Cummins QSB 4.5 T3 engine Rear engine position and large, easy-to-open engine hood makes maintenance a snap “Soft” start and stop prevents asphalt unevenness or cracking Optional Dynapac Compaction Analyzer for Asphalt provides critical information for quality paving
Double Drum High-Frequency Vibratory Asphalt Roller
Page 78 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
Wirtgen America Unveils W 50 DC Rumble Strip Cutter Wirtgen America’s new high-
performance rumble strip cutter— the W 50 DC Rumbler is astandard W 50 DC cold millingmachine with an optionalRumbler attachment installed,providing cutting of milled rum-ble strips in the standard, pre-ferred 16-in. width at speeds ofup to 180 fpm (55 m).
Without the Rumblerinstalled, the deep-cutting W 50DC cuts 8 in. (20 cm) deep anda variety of widths up to 20 in.(50.8 cm). It has a Deutz 123 hp(91 kW) diesel engine, com-bined with a more robust17,000-lb. (7,711 kg) design, 7-in. (17.7 cm) turning radius andstandard rear loading conveyor.
Addition of the WirtgenRumble Strip Milling attach-ment results in a durable, reli-able cold mill for generalmilling use, combined with amilling technology for cuttingmilled rumble strips in shoul-ders, or down centerlines oftwo-way pavements, accordingto the manufacturer.
The W 50 DC Rumbler features a six-sided rumble wheelwith urethane pads, powered by a hydraulic rumble wheeldrive. The Rumbler drum and wheel can be mounted oneither the left- or right-hand side of the W 50 DC, with easycutter access.
The W 50 DC Rumbler cutter drive is an extension of theW 50 DC’s standard drum drive system, using a mechanicalbelt drive.
A simple wheel/pad assembly rolls along the pavementsurface to actuate the Rumbler sub-frame in and out of thecut. Custom drum widths and pad sets are available. Specialpatterns can be achieved with special rumble wheel pads;intermittent patterns can be achieved with the available skipline kit. For optimal cutting, W1-10/S-R Rhino bits can beused.
A standard, long front pointer is designed for stable, accu-rate correction when on the job, essential for tracking inter-mittent references like the pavement “drip” line or a center-line. A short pointer also is installed as a standard. Both pro-vide a dual reference, which can give the operator a bettersense of the W 50 DC Rumbler’s position.
Why Milled Rumble Strips?
The Federal Highway Administration’s TechnicalAdvisory (T 5040.35) endorses shoulder rumble strips fordriver safety from run-off-road events, and maintains thatmilled-in strips are the best option. FHWA said milled rum-ble strips are superior because they have little or no effect onthe integrity of the pavement structure, and produce greaternoise and vibration than rolled or formed rumble strips
While rumble strips can be rolled-in for freshly placedasphalt shoulders, research by the Pennsylvania TurnpikeCommission found strips milled into existing shoulders tobe superior to rolled-in rumble strips.
The W 50 DC Rumbler is a standard W 50 DC cold milling machine with an optional Rumbler attachment installed.
VT LeeBoy, Inc. • 500 Lincoln County Parkway Ext. • Lincolnton, N.C. 28092 • 704.966.3300 • www.leeboy.com
Roland MachineryCompanyDePere, WI920/532-0165
Deforest, WI608/842-4151866/475-7040
Franksville, WI262/835-2710800/811-6005
Schofield, WI715/355-9898 866/475-7016
Eau Clair, WI715/874-5400866/475-7035
Escanaba, MI906/786-6920 800/236-6425
Springfield, IL217/789-7711 800/252-2926
Carterville, IL618/985-3399800/274-7202
Bridgeton, MO314/291-1330800/274-7230
Cape Girardeau, MO573/334-5252800/274-7210
Columbia, MO573/814-0083800/274-7212
Palmyra, MO573/769-2056800/274-7214
Portage, IN219/764-8080888/764-8226
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 79
The Worldwide Leader in Concrete Paving Technology
CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKSRECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS
GOMACO CORPORATION IN IDA GROVE, IOWA, USA
800-831-2320 � www.gomaco.com
F
ROAD MACHINERY &SUPPLIESDes Moines, IA
218/741-9011 • 800/555-1445Sioux City, IA
712/252-0538 • 800/633-9104Cedar Rapids, IA
319/363-9655 • 800/616-6615Milan, IL
309/787-1742 • 800/633-9114
1801 Watterson Tr.Louisville, KY 40299
502/491-4000 • Fax: 502/499-3195www.brandeismachinery.com
Corbin, KY606/528-3700 • Fax: 606/528-9014
Lexington, KY859/259-3456 • Fax: 859/254-0783
Stanville, KY606/478-9201 • Fax: 606/478-9208
Paducah, KY270/444-8390 • Fax: 270/575-4907
SWANSTON EQUIPMENT COMPANY3450 West MainFargo, ND 58103800/369-03712219 Elk DriveMinot, ND 58107800/210-8766
BRANDEIS MACHINERY & SUPPLY COMPANY
Page 80 • October 29, 2011 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide
DePere WI920/532-0165 • 920/532-0526
Deforest WI608/842-4151 • 866/475-7040
Franksville WI 262/835-2710 • 800/811-6005
Schofield WI 715/355-9898 • 866/475-7016
Eau Claire, WI715/874-5400 • 866/475-7035
Escanaba MI906/786-6920 • 800/236-6425
Springfield, IL217/789-7711 • 800/252-2926
Marengo, IL815/923-4966 • 800/765-2635
Bolingbrook IL630/739-7474 • 800/826-9608
Carterville, IL618/985-3399 • 800/274-7202
Bridgeton, MO314/291-1330 • 800/274-7230
Cape Girardeau, MO573/334-5252 • 800/274-7210
Columbia, MO573/814-0083 • 800/274-7212
Palmyra, MO573/769-2056 • 800/274-7214
Portage, IN219/764-8080 • 888/764-8226
1801 Watterson Tr.Louisville, KY 40299
502/491-4000 • Fax: 502/499-3195www.brandeismachinery.com
Evansville, IN812/425-4491 • Fax 812/425-1171
Corbin, KY606/528-3700 • Fax 606/528-9014
Lexington, KY859/259-3456 • Fax 859/254-0783
Stanville, KY606/478-9201 • Fax 606/478-9208
Paducah, KY270/444-8390 • Fax 270/575-4907
Indianapolis, IN317/872-8410 • Fax 317/872-8417
Ft.Wayne, IN260/489-4551 • Fax 260/489-1620
South Bend, IN574/233-8770 • Fax 574/233-8775
ROLAND MACHINERY BRANDEIS MACHINERY & SUPPLY COMPANY
Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 29, 2011 • Page 81
5633 W Hwy 13Savage, MN 55378
952/895-9595 • 800/888-9515Duluth, MN
218/727-8671 • 800/888-9535Grand Rapids, MN
218/328-5916 • 800/459-5916Virginia, MN
218/741-9011 • 800/752-4304
1603 East Algonquin Rd.Arlington Heights, IL 60005
847/437-8686 • Fax: 847/437-873816754 New Ave.
Lemont, IL 60439630/257-1261 • Fax: 630/257-0614
1548 Huntwood DriveCherry Valley, IL 61016
815/332-8222 • Fax: 815/332-3056
ROAD MACHINERY & SUPPLIES COMPANY
CASEY EQUIPMENT COMPANYwww.casey-equipment.com
ROLAND MACHINERYSpringfield, IL
217/789-7711 • 800/252-2926Carterville, IL
618/985-3399 • 800/274-7202Portage, IN
219/764-8080 • 888/764-8226Bridgeton, MO
314/291-1330 • 800/274-7230
Cape Girardeau, MO573/334-5252 • 800/274-7210
Columbia, MO573/814-0083 • 800/274-7212
Palmyra, MO573/769-2056 • 800/274-7214
Eau Claire, WI715/874-5400 • 866/475-7035
DePere, WI920/532-0165 • 866/475-7047
Deforest, WI608/842-4151 • 866/475-7040
Franksville, WI262/835-2710 • 800/811-6005
Schofield, WI715/355-9898 • 866/475-7016
2600 S. Lincoln Rd.Escanaba, MI
906/786-6920 • Fax: 906/786-5813
Page 82 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
2007 Mustang ME3003 - Mini Excavator, withlong arm and 16" bucket, 36 HP, 112 Hrs, Fullwarranty .................................................$23,700
Top Notch Equipment 612/290-0640 22-23 PK
NEW 2008 TEREX 4792, 23 1/2 ton boom truck,92’ main boom, 26’-44’ jib, front outrigger, block,ball, LMI, 21’ steel bed, mounted on a NEW 2008Sterling 300 HP Cummins, Cleveland, Ohio...................................................................................CALL
Call Andy at 216-316-1511 21-22 EB
1991 GROVERT700B, 40 tonrough terrain crane,110’ main boom, 32’-56’ jib, two winches,block, ball, Deutzdiesel engine, verygood condition,Cleveland, Ohio................................CALL
Call Andy at 216-316-1511
21-22 EB
2002 Bombardier SW48, 100HP Diesel, 473Hrs, 2955 Miles, Cab & Heat, Tracks are inGreat Shape ...........................................$17,500
763/428-4107 22-23 PK
2002 John Deere 250 Open Station, 1810Hrs, weight kit, KV0250A351153 ...........$12,500
763/444-8873 22-23 PK
1991 John Deere 300D, S/N 775834, OpenROPS..........................................................$19,000Call 502/456-4050 Ask for Melissa or Albert 21-22 EB
1994 Dresser 510C, 80 HP, 1.75 yd Bucket,cab, new tires...............................................POR
Diesel Machinery1-800/456-4005 Ask for Don or Herb 22-23 PK
2002 Kobelco ED 190 Blade Runner, s/nYL02U0117, 6720 Hrs, VERY GOOD CONDITION,10’2” Arm w/48” Bkt ....................................$65,000
Call David 219-696-5680 21-22 JM
Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction Equipment Buyers in the Midwest States.For more information, call Construction Equipment Guide today at
800/523-2200
2005 Case CX240LC, s/n 241488, 6003 Hrs...............................................................................$69,000
Call David 219-696-5680 21-22 JM
2001 New Holland LB75.B, 4WD, 3455 Hrs, Cabw/Air and Heat, 4WD Dipper Extendable...$28,500
Call Gary Mertz @ 314-895-9500 22-23 JM
2004 Takeuchi TL150, s/n 21500865, 2446 Hrs,ROPS, Rubber Tracks, Tak controls, Faster HydCouplers, 80" Tooth Bucket ........................$28,900
Call Mike @ 219-712-7700 21-22 JM
2004 Takeuchi TL140, s/n 21402072, 2999 Hrs,Cab w/Heat & A/C, Faster Hyd Couplers, 76” ToothBkt, Tak Controls, Rubber Tracks...............$24,000
Call Steve @ 630-878-8765 21-22 JM
2006 Case CX240, s/n DAC241862, 1365 Hrs,Boom 19’2”, 11’6” Arm, Shoes 3-Bar Steel 32”,Control Pattern Selector, Coupler ............$135,000
Call Mark @ 630-739-7770 21-22 JM
Atlas Copco ROC F9 Hyd Drill, 5046 Hrs on CatC9 Engine and 2600 Impact Hrs
Call 888-9-RACKERSAsk for Gary or Matt 21-22 JM
2009 Kawasaki 90ZV Loader, w/550 Hrs onCummins QSM11 Engine, 75%+Rubber, Like New
Call 888-9-RACKERSAsk for Gary or Matt 21-22 JM
Timber Mud Mats, Hundreds to choose from.Call for Details
John Poe at [email protected] 21-22 JM
The 2011 EZ-Screen 1200XL, with a 5'x6' screen box,and a patented non-hydraulic screen drive. The EZ1200XL works with a 1/2 to 2 yard loader. Now with a25-hp KOHLER Diesel Engine......$39,500 plus freight
Other Screens Availablewww.ez-screen.com • 866/745-5828 22 EB
2001 Vibrofonceur Vibratory Hammer, Clamping Head& Powerpack, 387 Hrs, Excellent Condition..........................................................................$60,000
Call Stephen @ 312-617-3114 21-22 AP
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 83
AERIAL LIFTS
Manlifts
All Makes & Models
Rental, Parts,
Service, Training
Modern Equipment
Sales & Rental
800/445-4381
AIR COMPRESSORS
Compressors
Ingersoll-Rand
New & Used Parts
Modern Equipment
Sales & Rental
800/445-4381
CRAWLER TRACTORS
Crawler Tractor
2005 John Deere 750J, 18’’
pads, hyd. tilt, PAT blade, 3698
hours...........................$83,950.
Call for more details!
Murphy Tractor
316-942-1457
www.murphytractor.com
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
EXCAVATORS
Hydraulic Excavators
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
2000 John Deere 330LC, std.
boom, aux. hyds., 5617
hours...........................$64,250.
2004 John Deere 450CLC, cab,
A/C, QC, 6706 hours.
..................................$139,500.
Call for more details!
Murphy Tractor
316-942-1457
www.murphytractor.com
1993 Hitachi EX200LC-2, 9’
arm, 31.5’’ tracks, 52’’ bucket,
mech. thumb, good condition,
11,000 hours...............$34,500.
913-371-3822
Mini Excavators
2006 Takeuchi TB153 FR, cab,
A/C, 36 hp, 16’’ rubber tracks,
12’10’’ dig depth, push blade,
24’’ bucket, 626
hours.......................$42,500.
Illinois Truck & Equipment
815/941-1900
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
FORESTRY EQUIPMENT
Logging Equipment
1996 Caterpillar 320L stroke
delimber, 31” pads, Balderson
attachment, good condition,
7157 hours ...............$92,000
Five Star Equipment Inc.
607/775-2006
FORKLIFTS
Industrial Forklifts
Gradall/Lull
Sales, Service, Training
Modern Equipment
Sales & Rental
800/445-4381
Track Loaders
Backhoe Loaders
2004 New Holland DC95 LGP,
canopy, 99HP diesel, 28’’ pads,
10’8’’ 6-way blade, 2250
hours...................$36,500.
Illinois Truck & Equipment
815/941-1483
1998 Case 580SL, cab, A/C,
ext-a-hoe, 4x4, aux. hyd., QC,
bucket, good condition, 4550
hours...........................$29,500.
913-371-3822
Skid Steer Loaders
2002 John Deere 250 II,
OROPS, counter weight, buck-
et, great condition, 800
hours..................................Call
913-371-3822
1996 Mustang 960, T-bar con-
trols, QC and bucket, fair condi-
tion, runs good, 6000
hours.............................$3,900.
Hardings, Inc.
219-696-8842
Wheel Loaders
NH Construction Equipment
New & Used
Parts & Service
Modern Equipment
Sales & Rental
800-445-4381
Track Loaders
2006 John Deere CT322, 12’’
track, aux. hyds., turbo, 1603
hours...........................$26,750.
Call for more details!
Murphy Tractor
316-942-1457
www.murphytractor.com
MISCELLANEOUS
Service
We Service What We Sell!
Warranty, Maintenance
and More!
Heavy Equipment, Light
Equipment, Hand Tools & Gas
Detectors
Norris Sales Company
610/279-5777
RENTALS
Rental
Construction & Equpment &
Supplies for the “Professionals”
Daily - Weekly - Monthly & Long
Term Rentals Available
Stone, Wacker, Honda, Gehl,
JLG to name a few .....
Norris Sales Company
610/279-5777
Construction & Industrial
Equipment Rentals
Compaction, Excavating, High
Lifts, Traffic Control, Safety,
Loaders, Landscaping
Norris Sales Company
610/279-5777
www.norrissales.com
Daily - Weekly - Monthly
Competitive Rates
Mixers, Generators, Arrow
Borads, Compaction,
Excavators, Loaders!
Now in PA & NJ
Norris Sales Company
800/547-RENT (7368)
610/279-5777
Construction
Equipment Rentals
Modern Equipment
Sales & Rental
800/445-4381
TRAINING
Operator Training
Are your operators compliant
with Federal Standards,
OSHA, ANSI, ISO?
MODERN GROUP
offers training for:
- Front-end Loaders &
Backhoes
- Aerial work platforms (AWP)
(Boom & Scissor Lifts)
- Rough Terrain Forklifts
(Gradall, Lull, JCB)
- Skid Steer Loaders
For information, pricing or
reservations:
Call 1-800-223-3827
www.moderngroup.com
All prices include Trainer, travel
and material
NO HIDDEN COSTS
TRENCHER
Trenchers
Ditch Witch RT55, s/n 286,
great used unit, A523 trenching
& #515 backhoe, good condi-
tion, 391 hours
....................................$46,500.
501-316-3200
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.
For just an additional $20 your ad can be posted on our online searchable database for 30 days
ad runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200CLASSIFIEDS
Subscribe toCEG today...
Get an edge on your competition!construction equipment guide Midwest edition subscribers are the bestinformed about construction news, construction equipment, sales, auctions,equipment prices, trends and changes in the industry and activities of its people.call toll free! We now accept visa, Mastercard & american express!
SUBSCRIPTIONS:
470 Maryland dr. • ft. Washington, pa 19034email: [email protected]
TOLL FREE 1-800/523-2200FAX 215/885-2910
cardMeMber’S naMe _________________________________________________________
cOMpanY naMe _______________________________________________________________
Street____________________________________ phOne nO. ________________________
citY ______________________________________State _______ zip ________________
tYpe Of buSineSS _____________________________________________________________
check enclosed viSa MaStercard american express
card nuMber
exp. date(Mo./Yr.)
Signature Of authOrized cardhOlder
One Year $65(within United States & Puerto Rico Only)
®
Would you likeYOUR
COMPANYfeatured in ConstructionEquipment
Guide?If so, please contact us:470Maryland Drive,FortWashington,
PA 19034
Page 84 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your Equipment Valued At Less Than$1 Million Run In Two Consecutive Issues For $95
ASPHALT CUTTERSEXTREME SERVICE,
Large OverseasOrder 10 ExtraUnits, Retails
$3,100
BlowoutSpecial:$2,000
Call Dawn or Gerryat 218-863-6444
22-23 AP
2003 DOOSAN MEGA 200-V ...............$67,500
Call Kirk Nelson at 785-823-6378www.sellersequipment.com 21-22 JM
2006 JCB 3CX Side Shift .....................$54,500
Call Kirk Nelson at 785-823-6378www.sellersequipment.com 21-22 JM
Next IssueCloses
November 4th
EMPLOYMENT OPPORTUNITYTowmaster, a well-established, high quality construction trailer manufacturer, is seeking aRegional Sales Manager for Texas and thesurrounding states. This individual will servicean established dealer network and solicit newdealerships where needed. Applicants musthave outside sales experience, minimum two-year degree and be willing to travel extensively. The position calls for strong communication skills, technical selling abili-ties, mechanical aptitude and proficiency in Microsoft Office applications. Experience inconstruction trailers is a plus.
Towmaster is an employee-owned companythat offers a comprehensive benefit packageincluding a compensation plan with commis-sion incentives. If you are interested in joining a progressive company with unlimited growthpotential, please send your resume to Lori Nelson at [email protected].
Towmaster is an Equal Opportunity Employer
Waste Management Debuts Dumpsterin a Bag; Can Hold Up to 3,300 Lbs.
The bag, which is sold in home improvement stores, holds 3 cu. yds. (2.3 cu m) ofdebris and is 8 ft. long by 4 ft. wide by 2.6 ft. tall (2.4 by 1.2 by .8 m).
Bagster — a dumpster ina bag — is a woven bagdesigned for disposing asmuch as 3,300 lbs. of debris.It is large enough to hold fullsheets of plywood, doorsand even a bathtub, accord-ing to Waste Management.
The bag, which is sold inhome improvement stores,holds 3 cu. yds. (2.3 cu m) ofdebris and is 8 ft. long by 4ft. wide by 2.6 ft. tall (2.4 by1.2 by .8 m).
The Bagster bag is usefulfor remodeling projects,home and garage cleanups,community clean-up proj-ects and moving preparation,according to WasteManagement.
For more information, call877/789-2247 or visitwww.thebagster.com.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 85
LOOKING FOR HITACHI EXCAVATORSEX 2001 AND EX 3001CONTACT: KHANPHONE: +92-333-5555-360EMAIL: [email protected] ––––––––––––––––––––––––––––––––HYUNDAI | 2006 0R NEWER HYUNDAI360 EXCAVATOR. LONG STICK PREF-ERED BUT NOT REQUIRED, E-MAIL PICTURES AND HOURS WITH PRICECONTACT: BEAUFORD MULLINSPHONE: 260 497 0500FAX: 260 490 8217EMAIL: [email protected]––––––––––––––––––––––––––––––––PICK UP TRUCK TO USED CNG FUIL | INEED SMALL PICK UP TRUCK FORNATURAL GAS OR CNG .CONTACT: LOUIS CARMONAPHONE: 917 517 1117FAX: 917 517 1117EMAIL: [email protected]––––––––––––––––––––––––––––––––AERIAL LIFT PLATFORMCONTACT: RAIPHONE: 00 33 614 287 264EMAIL: [email protected]––––––––––––––––––––––––––––––––BOBCAT BRAND SKID STEER LOAD-ERS AND MINI EXCAVATORS **WANTED** CONTRACTORS ONLYPLEASE NO DEALERSCONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––WANTED AUGER TRUCKS | TRUCKSWITH AUGER FOR TELEPHONE POLES.CONTACT: JAMES BOEVEPHONE: 616-218-7200EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU D41A3 | I NEED A TRANSMIS-SION FOR MY DOZERCONTACT: RAY HOPSONPHONE: 865-567-1743FAX: 865-992-3351EMAIL: [email protected] ––––––––––––––––––––––––––––––––USED CONSTRUCTION MACHINES |LOOKING FOR CATERPILLAR WHEELLOADERS, DYNAPAC ROAD ROLLERS,HITACHI EXCAVATORS CHECK IT OUTHTTP://ABOUT.ME/IUKCOCONTACT: MR IKRAM ULLAH KHANPHONE: +923002831078EMAIL: [email protected]––––––––––––––––––––––––––––––––JACKHAMMERS | LOOKING FOR USEDOR OBSOLETE AIR TOOLS. JACKHAM-MERS/PAVEMENT BREAKERS/ROCK-DRILS/IMPACT WRENCHESCONTACT: JOSEPH MEMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR 815F COMPACTORNEEDED | WE HAVE A PROVEN CUS-TOMER WHO IS INTERESTED IN ANOLDER CAT 815F COMPACTOR WITHS/N PREFIX 1GN. DOES NOT NEED TOBE CAB AND AIR, A CANOPY MACHINEIS ACCEPTABLE. IT DOES NEED TO BEGOOD ORIGINAL PAINT, GOOD CONDI-TION WITH GOOD FEET. LOCATED INSOUTHEASTERN U.S. WOULD BEPREFERED. PLEASE NO CONVER-SIONS.CONTACT: WENDELL CAINPHONE: 770-381-8984FAX: 770-381-6977EMAIL: [email protected]––––––––––––––––––––––––––––––––
ASTEC TRENCHER | TRENCHER ATT.FOR ASTEC 660 TRENCHER 5FT BOOMCONTACT: JIM BUTTERSPHONE: 970-481-5648FAX: 970-568-0278EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR 936E, 930, 950E, 950BABOVE 80 MODELS | WE ARE LOOKINGFOR HEAVY CONSTRUCTIONMACHINES LIKE WHEEL LOADERS,ROLLERS, MOTOR GRADERS, EXCAVA-TORS, BULLDOZERS, ETC. SEND USPHOTO, SERIAL NO, ENGINE CONDI-TION, MACHINE’S CONDITION ANDLAST PRICE FOB. CHECK OUT MYWANTED LIST HTTP://ABOUT.ME/IUKCOCONTACT: MR KHANPHONE: +92333-55-55-360EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE/CAT BACKHOE LOADER | 2WHEEL DRIVE OR 4 WHEEL DRIVE, 580E, K, SK, SL, OR SM. REASONABLEPRICES, CASH PAIDCONTACT: FRANKPHONE: 973-650-9268EMAIL: [email protected]––––––––––––––––––––––––––––––––COOLCAT 5600CONTACT: SHAWN LEHMANPHONE: 585-808-0043FAX: 585-593-5383EMAIL: [email protected] ––––––––––––––––––––––––––––––––CAT D6 | WE ARE LOOKING FOR CON-TRACTOR OWNED CAT D6R LGP/D6TLGP/D6R XL/D6T XL WITH PAT BLADE.NJ, PA, DE, NY AREA. [email protected]: JOHN NEVINSEMAIL: [email protected]––––––––––––––––––––––––––––––––INTEGRATED TOOL CARRIERCONTACT: DAVID JONESPHONE: 61892505550FAX: 61892506650EMAIL: [email protected]––––––––––––––––––––––––––––––––WANTED 14G CAT MOTOR GRADER |WE WANT TO BUY USED CAT 14GMOTOR GRADER, YEAR MODEL 1976-1995. OFFER US YOUR EQUIPMENTWITH PICTURES, SERIAL NUMBERS,YEAR MODEL, MACHINE CONDITIONAND LAST OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL: [email protected]––––––––––––––––––––––––––––––––D7G D8H D8K D9 155 355 375 WITH RIP-PER ONLYCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 | LATE MODELLOW HOURSCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––
BOBCAT BRAND SKID STEER LOAD-ERS AND MINI EXCAVATORS. WE AREALWAYS BUYING. **NO DEALERS PLEASE**CONTACT: WARREN OR MAUREENEMAIL: [email protected]––––––––––––––––––––––––––––––––BIDWELL WORK BRIDGE - MOTORIZEDWITH A 40 MINIMUM SPANCONTACT: BILL BEDFORDPHONE: 563-468-1343FAX: 877-348-4776EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR A HIGHRAIL BUCKETTRUCK FOR OCS WORK IN SACRA-MENTO.CONTACT: HERB HOLDERPHONE: 650-333-2329FAX: 916-929-5407EMAIL: [email protected]––––––––––––––––––––––––––––––––45 TO 50 KW GENERATORCONTACT: JIMEMAIL:[email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR CATERPILLARWHEEL LOADERS 916, 950, 950B, 950E,966F & HITACHI EXCAVATOR EX200-1,PLEASE LET US OFFER IF AVAILABLEFOR SALE & SEND US DETAILS, PIC-TURES.CONTACT: NAQIB KHANPHONE: +92-345-8818803EMAIL: [email protected]––––––––––––––––––––––––––––––––WE WANT TO BUY CATERPILLARDOZER D9R WITH RIPPER, PLEASEOFFER ME IF AVAILABLE FOR SALES &SEND US DETAILS,PICTURES.CONTACT: NAQIB KHANPHONE: +92-333-3298751EMAIL: [email protected]––––––––––––––––––––––––––––––––WANTED: CAT 988F CAT 988F IIPLEASE EMAIL PHOTOS, DETAILS ANDWHOLESALE PRICECONTACT: MATT VANDENBERGPHONE: 602-358-1591EMAIL: [email protected]––––––––––––––––––––––––––––––––SEEKING A 1998-2002 LINK-BELT LS-138H II CRAWLER CRANE IN GOOD CONDITION. SEND EMAIL, DETAILEDPHOTOGRAPHS AND SPECIFICATIONSAM ONLY SEEKING CRANES PRICEDTO SELL.CONTACT: JEFF LAWSONPHONE: 864-542-4369EMAIL: [email protected]––––––––––––––––––––––––––––––––KOBELCO SK 200 MARK IVCONTACT: FERNANDO CAMARGOPHONE: 1-845-721-01-38EMAIL:[email protected]––––––––––––––––––––––––––––––––INTERNATIONAL TD15 DOZER | 1988UP, CAB OR OPEN, GOOD CONDITIONWORK READY. NEED A.S.A.P.CONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––
WE WANT TO BUY USED CAT 140GMOTOR GRADER, YEAR MODEL 1985-1995. OFFER US WITH PICTURES, SERIAL NUMBERS, YEAR MODEL,MACHINE CONDITION AND LASTOFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL: [email protected]––––––––––––––––––––––––––––––––USED HEAVY TRUCK, TRAILER &MACHINERY EQUIPMENT | LATEMODEL ASPHALT PAVER EQUIPMENT,WIRTGEN, CAT, KOMATSU DOZERS,ALUMINUM DUMP TRAILERS, FRAME-LESS 35 - 39 AND DETACHABLE TRAILERSCONTACT: JAMES BOEVEPHONE: 616-218-7200EMAIL: [email protected]––––––––––––––––––––––––––––––––WANTED 14G CAT MOTOR GRADER |WE WANT TO BUY USED CAT 14GMOTOR GRADER, YEAR MODEL 1976-1995. OFFER US WITH PICTURES, SERI-AL NUMBERS, YEAR MODEL, MACHINECONDITION AND LAST OFFER PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL: [email protected]––––––––––––––––––––––––––––––––A30D | LOOKING FOR 3 LATE MODEL,LOW HOUR TRUCKS EQUIPPED WITHTAILGATES.CONTACT: DAVID MULLINSPHONE: (276) 870-0005FAX: (606) 644-0477EMAIL: [email protected]––––––––––––––––––––––––––––––––MKT VIBRATORY PILE HAMMERS | I AMSEEKING TO PURCHASE MKT VIBRA-TORY PILE HAMMERS LOCATED IN THEUSA. FORWARD PHOTOGRAPHS ANDMODEL/YEAR INFORMATION TO MYEMAIL ADDRESS. I AM SEEKING USEDCONTRACTOR OWNED VIBROS PRICEDWHOLESALE. PROMPT PAYMENT ANDEQUIPMENT PICKUP ASSURED. EMAILME IF YOU HAVE USED MKT V20B ORV35 MODEL VIBROS FOR SALE.CONTACT: JEFF LAWSONPHONE: 864-542-4369EMAIL: [email protected]––––––––––––––––––––––––––––––––USED TRACKS | LOOKING TO BUYUSED SET OF TRACKS W/PADS FOR ACASE 850DCONTACT: JAMES HOPKINSPHONE: 559 676 2845EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR580 JG1 TRACK JAWCRUSHER | LATE MODEL LOW HOURWORK READYCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––LANDOLL TRAILER | 50 51 OR 53 FOOTAIR RIDE 35,40,50,55 TON USED FOREXPORTCONTACT: PATRICK SEMENUKPHONE: 813-985-8546 EXT # 204FAX: 813-989-2554EMAIL: [email protected]––––––––––––––––––––––––––––––––
CAT BULLDOZERS | CAT D10T BULL-DOZERS, UNDER 3,000 HOURS. MUSTHAVE RIPPERS.CONTACT: EQUIPMENT MANAGERPHONE: 914-693-0300EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER D7G WITH RIPPER ONLYUSER I NEED 3CONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE 580SM | 580SM UNDER 3500 HRS.4X4, EROPS, EXT, CLOSE TO PHILA, PA.CONTACT: JOHN NEVINSPHONE: 215-254-0120EMAIL: [email protected]––––––––––––––––––––––––––––––––BOBCAT EQUIPMENT | BOBCAT BRANDEQUIPMENT **WANTED** INSTANTCASH PAID. NO DEALERS PLEASECONTACT: WARRENPHONE: 239-682-4141EMAIL: [email protected]––––––––––––––––––––––––––––––––LULL 844 OR 1044 FROM CONTRACTORWHOLESALE PRICECONTACT: BRIANPHONE: 856-207-5340EMAIL: [email protected]––––––––––––––––––––––––––––––––CAB FOR KAWASAKI 70Z LOADER |COMPLETE CAB IS NEEDEDCONTACT: JENNIFERPHONE: 435-744-5580FAX: 435-744-5586EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 951B UNDERCARRIGE PARTSCHEAP OF USEDCONTACT: KEVINPHONE: 856-297-4758EMAIL: [email protected]––––––––––––––––––––––––––––––––(2) CAT 627GS, UNDER 5,000 HRS, PREFER NE US • PREFER EROPS W/A/C BUT NOT NECESSARY.CONTACT: JOHN NEVINSEMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER 550G LT «CASE« LOWHOURS AND D4G LTCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL: [email protected]––––––––––––––––––––––––––––––––12G,1990 1992, HM4001, 2001 2002, PCSERIES EXCAVATORS • WE ARE LOOK-ING FOR THE FOLLOWING EQUIPMENT.IF YOU HAVE ANY UNIT IN YOURSTOCK, PLEASE SEND DETAILS & PIC-TURES ALONG WITH YOUR BESTPRICE. USA DEALERS ONLY. THANKSCONTACT: MARKEMAIL: [email protected]––––––––––––––––––––––––––––––––PC350 • WANT YEAR 2000~2002CONTACT: ALAMPHONE: +971555999819FAX: +97165433292EMAIL: [email protected]––––––––––––––––––––––––––––––––
LATE MODEL F550 SERVICE TRUCKWITH CRANE, WELDER, AIR COMPRES-SORCONTACT: NICKPHONE: 203-535-9824EMAIL: [email protected]––––––––––––––––––––––––––––––––BULLDOZER D7G AND D8K FROMUSER ONLY STATESCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL: [email protected]––––––––––––––––––––––––––––––––532DXCONTACT: DAPHNIEEMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 416C BACKHOE LOADERCONTACT: MARK SNOWPHONE: 336-215-5388FAX: 336-215-5388EMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 815F | WE ARE LOOKING FOR 1 OR2 CAT 815F COMPACTORS WITH 1500TO 8000 HOURS, EROPS, AC.CONTACT: MARCEL EQUIPMENT LTDPHONE: 519-686-1123FAX: 519-686-9350EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 TRACK JAWCRUSHER | LATE MODEL LOW HOURCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––HITACHI EXCAVATOR EX200, EX200LC,UH083 | PLEASE LET ME KNOW IF YOUHAVE AVAILABLE OR UP COMING UNIT.CONTACT: HIDAYAT KHANPHONE: +92-345-8818803EMAIL: [email protected]––––––––––––––––––––––––––––––––DYNAPAC ROLLER CA251 & CATERPILLAR WHEEL LOADERS 950B,950E, 966F | LET ME KNOW IF YOUHAVE AVAILABLE OR UPCOMING UNIT.CONTACT: NAQIB KHANPHONE: +92-333-3298751EMAIL: [email protected]––––––––––––––––––––––––––––––––66" SMOOTH DRUM FOR AN INGERSOLL RAND SD70FCONTACT: WENDELL CAINPHONE: 770-381-8984FAX: 770-381-6977EMAIL: [email protected]––––––––––––––––––––––––––––––––DUMPER | WE WANT TO BUY A KOMAT-SU CD110 RUBBER TRACK DUMP.CONTACT: LARRY LEISTIKOWPHONE: 608-655-1300FAX: 608-655-1399EMAIL:[email protected] ––––––––––––––––––––––––––––––––ALUMINUM PANELS FOR CONCRETECONTACT: LUIS CARMONAPHONE: 917 517 1117EMAIL: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
Page 86 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contractors Face Pressure of Securing a Stable ProductThe low, flat terrain around Devils Lake
consists of various coulees, channels andbasins, which may be separated during timesof low water, or connected during highwater. Thus the boundaries of the lake canvary greatly from year to year, depending onthe amount of precipitation.Above average rains and snowfalls during
the mid 1990s caused Devils Lake water lev-els to rise rapidly. In spring and summer2009, the lake rose nearly 4 ft. (1.2 m) Thelake elevation has continued to rise eachyear, creating an overall 26-ft. (7.9 m)increase in 13 years, claiming another81,000 acres of adjacent, privately ownedland. The lake now covers about 125,000acres, according to information from theDevils Lake Area Chamber of Commerce. In late June 2010, the lake crested at a new
record high elevation just above 1,452 ft.(442.5 m) above sea level, with the top of the8-mi. embankment protecting Devils Lake at1,460 ft. (445 m), a level that was completedin December of 2005. Then in the spring of2011 the lake rose about 3 ft. (0.9 m) to itscurrent elevation of 1,454 ft. (443.1 m),according to information from the DevilsLake Area Chamber of Commerce. Traditionally, the top 6 ft. (1.8 m) of level
elevation serves as freeboard or a safety fac-tor to prevent waves or ice from splashingover it, explained Bonnie Greenleaf, projectmanager with the U.S. Army Corps ofEngineers in St. Paul, Minn.The height required for the maximum
pool elevation of 1,458 ft. (444.3 m) (whereflows would begin out of the natural outlet atTolna Coulee) is 1466 ft. (446.8 m) to meetdam safety standards. So, to meet those stan-dards, the embankment is being lengthenedfrom 8 mi. long to over 12 mi. (3.7 m),extending the embankment to high ground,and increasing its height to 1,466 ft. abovesea level. The initial levees were constructedin the 1980s to an elevation of 1,445 ft.(440.4 m) above sea level. In 1996 the dikeswere raised an additional 5 ft. (1.5 m) and in1997 they were raised again, this time to1,457 ft (444 m) to provide protection for alake level of 1,451 ft. (442.2 m), accordingto information from the U.S. Army Corps ofEngineers. The lake began outletting into nearby
Stump Lake at 1,446 ft. (440.7 m) This risein water level has caused flooding to proper-ty and communities as well as transportationsystems throughout the area. Water levels inDevils and Stump lakes are expected to con-tinue to rise over the next decade, floodingmore property, communities and transporta-tion systems until the water level reaches1,458 ft. (444.3 m), at which time the waterbegins to flow into the Sheyenne River viathe Tolna Coulee, causing additional flood-ing issues for communities along theSheyenne, according to information fromthe Devils Lake Area Chamber ofCommerce. To help combat the water, some roads are
functioning as dams, protecting interiorroads, property and homes, even though theroads were not designed or constructed to actas dams. Corrective measures have beenidentified to reinforce these roads so thatthey function safely and meet dam safetystandards, according to information from theU.S. Army Corps of Engineers. About 7 mi. (11.3 km) of highways 20
and 57 are being raised. This phase of con-struction will cost about $150 million, whichis shared 75/25 by the federal governmentand the city of Devils Lake.The embankment construction work is
being phased so that an acceptable level ofprotection will be in place prior to the springrunoff of 2012. Embankments are beingraised in four phases to reach 1,466 ft. Phase1 was awarded in October of 2009; con-struction of a pump station head well is near-ing completion. Phase 2 was split into two contracts to
allow for additional time to address geotech-nical challenges. Phase 2a was awarded inNovember 2010 and will be completed inNovember 2011, which includes raising andlengthening the embankment, which is cur-rently about half complete. The FederalHighway Administration and the Bureau ofIndian Affairs are the lead agencies on thisproject, with technical support provided bythe Corps of Engineers. Many of the roadsare located within the Spirit Lake IndianReservation.Phase 3 was awarded in April 2011; Phase
2b was awarded in May 2011. All phases arescheduled to be completed by November2012. Constructing the various embankmentelevations has required tremendous amountsof materials. When creating the 1,457 ft.height in 1997, 1.8 million cu. yds.(1,376,199 cu m) was needed; and, to createthe 1,460 ft. (445 m) height in 2005, about160,000 cu. yds. (122,329 cu m) wasrequired.Lengthening the current 8 mi. embank-
ment by 4 mi. (6.4 km) and increasing itsheight 6 ft. (1.8 m) requires about 2.6 millioncu. yds. (1,987,843 cu m) of materials,including riprap, impervious fill, sand drain,bedding and top soil. The embankment isbeing constructed to a width of 20 ft. (6.1 m) Some new techniques to construct the
levee, due to Hurricane Katrina, have beenincorporated such as creating a vegetative-free zone of 50 ft. (15.2 m), which can havenothing in it except turf, making it necessaryto move utilities, Greenleaf said. In someareas the levees are being tied into the highground. “That is something that is stricter then in
the past because since Katrina there is a lotof concern about levee standards,” sheadded.A few challenges presented themselves
over the last few years because the lake levelis rising so quickly, creating the need for anaggressive schedule and a more technicaldesign, Greenleaf said. “We had to scramble and a lot of analysis
had to go into this because technically this isa dam. Soil borings were taken and testingwas done and we discovered that the materi-als were worse than we originally thought.” This made it necessary for crews had to
construct additional features like slurrytrenches, which are created as impermeablegroundwater barriers.“Normally, when working on a dam and
doing a project on a reservoir the water levelis drawn down as much as possible so thereis no big head of water on the other side; but,on this project that is not possible, which cre-ated a lot of pressure on the other side,”Greenleaf said. Making sure the final product is stable
places a lot of pressure on the contractors asto how they build the embankment. Soil is hauled in from various borrow
sites, which has been a huge challenge whenextending the embankment and when raisingthe highway heights, Greenleaf said. TheCity of Devils Lake and the Spirit LakeTribe has rules in effect on how deep can digbecause they don’t want a bunch of holesthat lake water could fill later. “It has been difficult to find materials,
since we have to be a little more particular inmaterials use. We want clay for its com-paction properties, while sandy materialscan be used on the highways. However,there are property owners who are willing tosell soil,” Greenleaf said.Typically, a longer design period and a
longer construction period would have beenincorporated on a project of this type, butcrews are concerned because of how fast thelake has risen in the last few years and howmuch it will rise over the upcoming winter. “So if contractors don’t have the embank-
ment raised to certain level we have to havetemporary measures in place so waves aren’tsplashing over embankment. At an elevationof 1,460 feet above sea level we have 6 feetof freeboard so the water is not above1,454,” Greenleaf said. “It is a few tenthsabove that now, and if comes up next springit will cause water to splash over the top. Inthe spring it looks like ocean waves on thehighway and plows are scraping away thelogs and rocks. We fortunately didn’t havedamage to our rip rap because we use reallybig rock. We have to protect our embank-ment and be ready for possible issues.”The water level increases in the spring and
peaks during June but the Corps is hopingfor a half foot or a foot of evaporation duringthe summer. Last year they were hoping forthat too but it didn’t happen. The water levelheld to within a few tenths of where it hadbeen. That level is holding steady betweenthe evaporation and the excessive rains thissummer. Crews with Ames Construction Inc., of
Burnesville, Minn., in conjunction with theNorth Dakota Department of Transportation,are working to raise a 7 mi. length ofHighways 20 and 57, about 12 mi. south ofDevils Lake. Work began in 2010 to raisethe various locations along these two high-
ways between 7 and 14 ft. (2.1 and 4.3 m),said Benjamin Lovin, project manager withAmes Construction. Prior to construction,lake water had increased to the point whereit was up to the edge of the road, causingvehicle weight limits and speed reductions to25 mph. As of mid-September, work was about 60
percent complete with a scheduled comple-tion of November. A late spring this year anda wetter than normal summer shortened thework season. “Work on some portions will be a couple
of weeks behind schedule, while work onother portions is actually ahead of schedule,”said Greg Semenko, assistant district engi-neer with the North Dakota Department ofTransportation. “The contractors have donean excellent job in trying to meet the sched-ules, Some of the operations are working 24hours a day.”Millions of cubic yards of materials are
needed to raise the 7-mi. portion of roadway.About 100 side dump and bell dump semiswere used to haul in 2.6 million cu. yds. ofborrowed embankment materials and anoth-er 1.4 million cu. yds. (1,070,379 cu m) ofborrowed impervious clay core material.Another 300,000 cu. yds. (229,366 cu m) ofwaste excavation was removed from the sitein order to improve the remaining soil.About 200,000 tons (181,437 t) of aggregatebase course was placed, as well as about130,000 tons (117,934 t) of sand drainagematerial and about 430,000 tons (390,089 t)of rip rap and bedding stone. All will betopped with about 20,000 tons (18,144 t) ofasphalt paving.Twelve Caterpillar model 330 to 375
excavators were used to move the materials,along with eight Caterpillar D5 to D8 dozers,two Caterpillar 627 scrapers, and fourCaterpillar 140 motorgraders. Five Dynapacand Caterpillar sheeps-foot and smooth-drum compactors were also needed.Temporary steel sheet piling was set into
place with a Manitowoc 10000 100-toncrane with an H & S 4400 vibratory ham-mer. Numerous large earthwork projects in the
Devils Lake are creating congested workconditions and “a shortage of trucks andqualified workers to fill everyone’s needs,”Lovin said. Other projects in the Devils Lakeinclude several locations along Highway 19,which intersects with northern points ofDevils Lake such as Six Mile Bay, MauvisCoulee and Minnew. Flats, Creel BayCrossing by the Devils Lake airport, US 2east of Penn, Highway 20 at Spring Lake,the Devils Lake Dike and Grahams IslandRoad.Once the highways have been raise and
the embankment is complete an emergencyoutlet for Devils Lake will need to be con-structed in order to create a permanent solu-tion to the community’s flooding issues.Several locations for an outlet have beenproposed but no decision has yet been made.CEG
FLOODING from page 1
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 87
Still Time to Register forWorkplace Safety Courses!CBI (Center for Business &Industry), a Division of SouthCentral College (A MinnesotaCommunity and Technical College)invites you to register for courses inNovember and December, 2011.The classes include topics on:10-Hour Construction, November28 and 29, 2011. This course isset to give attendees the opportuni-ty to receive an OSHA 10 hour cardfor Construction. Forklif t Safety, December 5, 2011.The Forklift Safety course will con-centrate on the new safety trainingrequirements for “PoweredIndustrial Truck Operators,” and thesteps required to maintain compli-ance. Excavation, December 22, 2011.This course will cover OSHAConstruction Standard onExcavation (Subpart P). It will alsocover soils mechanics and use ofsoil testing instruments. Online Registration with 24/7Access – Browse the center forbusiness and industry classes. Forregistration assistance contact theCBI Registration Office, Mondaythru Friday, 7:30 AM to 4:00 PM at507-389-7203. 2012 FLORIDA ContractorAssociations Meetings Postings:
Florida Prestress ConcreteAssociation Winter Meeting,February 8 and 9, 2012, LakeMary, FL.
2012 FTBA ConstructionConference to be held March 20and 21, 2012 - Double Tree Hotelin Orlando, FL. Location:Doubletree by Hilton at theEntrance to Universal Orlando5780 Major Boulevard, Orlando,FL 32819. For more informationplease call 407-351-1000.
2012 Annual Asphalt ContractorsAssociation of Florida Convention,June 21 to 23, 2012 at OrlandoWorld Center Marriott, Orlando, FL.
2012 Annual Asphalt ContractorsAssociation of Florida Convention,July 19 to 21, 2012 at UUCFConvention, The Ritz-CarltonOrlando, Grande Lakes, Orlando,FL.
Save the Date:AGC of Minnesota4th Annual Grading and BaseInnovations and Technology ForumThe 4th annual AGC-Mn/DOTGrading and Base Innovations andTechnology Forum is scheduled forTuesday, December 1, from 7:30to 4:30. The Forum will be held atthe Sofitel Hotel in Bloomington.Again this year, the Forum will befollowed in the evening by AGC’spopular Construction IndustryHoliday Reception. December 1st -Please save this date and take timeto participate in this exciting confer-ence.
BusinessCalendar
ALEX LYON & SONSales Managers & Auctioneers, Inc.
Bridgeport, NY Phone: 315/633-2944 Fax: 315/633-8010 www.lyonauction.com
LATE MODEL RENTAL RETURN CONSTRUCTION
& AGRICULTURAL EQUIPMENT, SKID STEERS,ATTACHMENTS, SUPPORT & CAMPING TRAILERS.
DIRECTIONS: From the North/South: take I-71 to Rte. 36 &US 37 Exit, proceed West on Rtes. 36 & 37 for 9 miles toDelaware. Turn right on Rte. 23 North for 1.2 miles to the salesite. Entrance on left at the Travelodge. From the East/West:
Take I-70 to I-270 bypass, proceed North on I-270 to I-71 to Exitfor Rtes. 36 & US 37 and proceed as noted above. NOTE:
Auction Entrance is off of Rt. 23. Address: 935 U.S. 23North Delaware, OH 43015.
online bidding available: www.lyonauction.com
NOTE: Selling will be alarge quantity of both largeand small, late model rentalfleet equipment in tip topshape – both constructionand agricultural.
HILITES INCLUDE: 2
UTILITY TRACTORS: Ford600, David Brown 885, AGRICULTURAL EQUIPMENT: JD 346Square Baler, 2006 Hesston 745 Round Baler, 2008 NH 488 9ft.Haybine, 2008 Case SBX540 Square Baler, 2008 NH 273 SquareBaler, STRAW BLOWERS: Finn B40/W61200, 2 STUMP GRINDERS:
(2) Vermeer SC252, ATTACHMENTS: Finn Straw Blowers, (10) Post
Hole Augers, Hay Spears.
SALE SITE PHONE: (740) 363-6000, 315-559-5900OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989
SATURDAY, NOVEMBER 5 @ 9:30 AMCOLUMBUS, OHIO
(DELAWARE COUNTY FAIRGROUNDS)
Page 88 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Coming Auction page Sponsored by Reckart Logistics
ALEX LYON & SON
AUCTIONEERS
www.lyonauction.com315-633-2944�
•�Jackson,�AL
Wed.,�November�2,�2011For:�Late�Model�Construction,Paving�&�Support�Equipment
•�Columbus,�OHSat.,�November�5,�2011For:�Late�Model�RentalReturn�ConstructionEquipment,�Attachments,Aerials
•�Detroit,�MI
Fri.,�November�11,�2011For:�Construction�Equipment,Truck�Tractors,�Dump�Trucks,Trailers�&�Support�Equipment
•�Rochester,�NY
Sun.,�November�13,�2011For:�Light�Construction,�Shop&�Support�Equipment
•�Houston,�TX
Tues.,�November�15,�2011For:�Late�Model�ConstructionEquipment,�Aerials,�Forklifts,Trucks�and�Trailers
•�Pell�City,�ALWed.,�November�16,�2011For:�Truck�Tractor�andSpecialized�Trailer�Auction
•�Scranton,�PA
Fri.,�November�18,�2011For:�Construction�Equipment,Support,�Trucks�and�Trailers
•�Ledyard,�CT�(Foxwood
Casino)Sat.,�November�19,�2011For:�Construction�andSupport�Equipment,�AerialLifts,�Forklifts,�Trucks�&Trailers
•�Beaumont,�TX
Fri.-Sat.,�December�1-2,�2011For:�Rough�Terrain�Cranes,Construction�Equipment,Trucks,�Trailers,�Plus�MuchMore!
•�Atlanta,�GA
Tues.,�December�6,�2011For:�Construction�andSupport�Equipment,�AerialLifts,�Forklifts,�Trucks�&Trailers
•�Dallas,�TX
Wed.,�December�7,�2011For:�Late�Model�Cat,Komatsu,�John�DeereEquipment,�Aerials,�Trucksand�Trailers
•�Columbus,�OH
Fri.,�December�9,�2011For:�Late�Model�TruckTractors,�Various�EquipmentTrailers
•�Racine,�WI
Sat.,�December�10,�2011For:�Late�Model�EarthmovingEquipment,�Trucks�andTrailers
•�Chicago,�IL
Tues.,�December�13,�2011For:�Construction,�Aerials,Support,�Trucks�and�Trailers
•�Lexington,�KY
Wed.,�December�14,�2011For:�Construction�&�DrillingEquipment,�Trucks�andTrailers
•�St.�Louis,�IL
Thurs.,�December�15,�2011For:�Late�Model�ConstructionEquipment,�Attachments,Trucks�&�Trailers
•�Atlantic�City,�NJ
Sat.,�December�17,�2011For:�Construction�SupportEquipment,�Attachments,Trucks,�Trailers�and�More!
•�Albany,�NY
Thurs.,�December�29,�2011For:�Construction�Equipment,Support,�Attachments,�Trucksand�Trailers
•�Kissimmee,�FL
Sat.-Sun.,�Jan�28�–�Feb�5,2012For:�19th Annual�FloridaSale!�Rental�ReturnsConstruction�Equipment,Attachments,�Aerials,Support,�Trucks�and�Trailers
•�Wright�City,�OK
DATE�TBAFor:�Complete�Liquidation�ofOne�of�the�Largest�WoodMills�in�the�U.S.
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com402-421-2631
•�Mid-Atlantic,�USA
November�2,�2011
•�Detroit,�MI
November�3,�2011
•�Las�Vegas,�NV
November�4,�2011
•�Pittsburgh,�PANovember�8,�2011
•�Fort�Knox,�KY
November�10,�2011
•�Dickinson,�ND
November�10,�2011
•�Clearfield,�PA
November�15,�2011
•�Houston,�TX
November�16-17,�2011
•�Lincoln,�NENovember�18,�2011
•�Las�Vegas,�NV
November�18,�2011
•�Salt�Lake�City,�UT
December�1,�2011
•�Minneapolis,�MNDecember�2,�2011
•�San�Antonio,�TX
December�2,�2011
•�Phoenix,�AZDecember�5,�2011
•�Kansas�City,�MO
December�6,�2011
•�Columbus,�OH
December�6,�2011
•�Olympia,�WADecember�6,�2011
•�Albuquerque,�NM
December�7,�2011
•�Atlanta,�GADecember�7,�2011
•�Hartford,�CT
December�8,�2011
CANADA
•�Grand�Prairie,�ABNovember�22-23,�2011
•�Saskatoon,�SK
November�30,�2011
•�Montreal,�QCDecember�1-2,�2011
•�Toronto,�ON
December�5-6,�2012
•�Truro,�NS
December�14,�2011
INTERNATIONAL
•�Torreon,�Mexico
November�9,�2011
•�Rome,�ItalyNovember�12,�2011
•�Ipswich,�Australia
November�17,�2011
•�Meppen,�Germany
November�22,�2011
•�Brisbane,�AustraliaNovember�22,�2011
•�Geelong,�Australia
November�24,�2011
•�Moerdijk,�NetherlandsNovember�24-25,�2011
•�Ocana,�Spain
December�1-2,�2011
•�Polotitlan,�Mexico
December�2,�2011
•�Caorso,�Italy
December�6,�2011
•�Athens,�Greece
December�6,�2011
•�At,�Aubin�Sur�Gaillon,
France
December�8,�2011
BAR NONE AUCTION
www.barnoneauction.com
866-372-1700�
•�Sacramento,�CA
Sat.,�November�12,�2011
For:�Construction�Equipment
•�San�Bernardino,�CA
Fri.,�November�18,�2011
For:�Construction�Equipment
•�Sacramento,�CA
Sat.,�December�10,�2011
For:�Construction�Equipment
•�San�Bernardino,�CA
Fri.,�December�16,�2011
For:�Construction�Equipment
BIG IRON
www.bigiron.com
800-937-3558�
•�ONLINE�ONLY
Wed.,�November�9,�2011
For:�Construction�Equipment
•�ONLINE�ONLY
Wed.,�November�23,�2011
For:�Construction�Equipment
•�ONLINE�ONLY
Wed.,�December�14,�2011
For:�Construction�Equipment
•�ONLINE�ONLY
Wed.,�December�21,�2011
For:�Construction�Equipment
•�ONLINE�ONLY
Wed.,�December�28,�2011
For:�Construction�Equipment
DAVIS AUCTIONS
www.davisauctionsinc.com
�203-758-4087
•�Prospect,�CT
Sat.,�December�10,�2011
DEANCO AUCTIONS
www.deancoauction.com
�601-656-9768
•�Philadelphia,�MS
Wed.-Thurs.,�Nov.�16-17,
2011
For:�Huge�2�Day�Contractor’s
Auction
GOODRICH AUCTION
SERVICE INC.
www.goodrichauctionser-
vice.com
�607-642-3293
•�Johnson�City,�NY
Thurs.,�November�3,�2011
For:�Construction�and
Industrial�Equipment
HUNYADY AUCTION COMPANY
www.hunyady.com
�800-233-6898
•�Andover,�NJ
Wed.,�December�7,�2011
For:�Construction�and�Paving
Equipment
IRAY AUCTIONS
www.iraymn.com
�320-968-7230
•�Foley,�MN
Fri.,�December�9,�2011
IRON PLANET AUCTIONS
www.ironplanet.com
�888-433-5426
ONLINE�AUCTIONS
Go�to�www.ironplanet.com to
view�the�complete�auction
schedules,�inspection�reports
and�to�place�your�bid!
•�Thurs.,�November�10,�2011
For:�Construction�Equipment
•�Thurs.,�November�17,�2011
For:�Construction�Equipment
JAMES G. MURPHY INC. AUC-
TIONEERS
www.murphyauction.com
�800-426-3008
•�Kent,�WA
Wed.-Thurs.,�November�2-3,
2011
For:�Construction�Equipment.
Trucks,�Wire�&�Fiber�Optic
Cable
JOSEPH FINN CO.
AUCTIONEERS & APPRAISERS
www.josephfinn.com�617-964-1886
•�Circleville,�OH
Tues.,�November�8,�2011For:�Onsite�and�Online�PublicEquipment�Auction
KEENAN AUCTION COMPANY
www.keenanauction.com207-885-5100
•�Windham,�ME
Thurs.,�November�10,�2011For:�Construction�andAggregate�Equipment,�RealEstate
KOSTER INDUSTRIES
www.kosterindustries.com631-454-1766
•�Sarasota,�FL
Wed.-Thurs.,�Dec.�9-10,�2011For:�All�Assets�of�MajorRental�Center
MARTIN & MARTIN
AUCTIONEERS, INC.
www.mmaauction.com�800-763-2728
•�Biloxi,�MS
Thurs.,�November�3,�2011For:�Multi-Parcel�Real�EstateAuction
•�Brooklyn,�MS
Fri.-Sat.,�December�9-10,2011For:�2-Dsay�PublicConstruction�and�FarmEquipment�Auction
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauctioneers.com�860-642-4200
•�Carroll,�OHFri.,�December�9,�2011For:�New�and�UsedDemolition�and�ScrapHandling�Equipment
•�North�Franklin,�CT
Fri.-Sat.,�December�16-17,2011For:�Major�Public�EquipmentAuction
PURPLE WAVE AUCTION
www.purplewave.com�866-608-9283
•�ONLINE�ONLYWed.,�November�9,�2011For:�Construction�Equipment
•�ONLINE�ONLYThurs.,�November�10,�2011For:�Construction�Equipment
•�ONLINE�ONLYThurs.,�November�17,�2011For:�Construction�Equipment
•�ONLINE�ONLYTues.,�November�29,�2011For:�Construction�Equipment
RITCHASON
AUCTIONEERS INC.
www.ritchason.com�800-806-3395
•�Lebanon,�TNSat.,�December�10,�2011For:�Construction�Equipment
ROY TIETSWORTH AUCTION-
EERS
www.tietsworth.com�585-243-1563
•�Groveland,�NYSat.,�December�3,�2011For:�Farm�and�ConstructionEquipment,�Heavy�and�LightTrucks
RYAN AUCTION SALES
www.ryanauctionsales.com�603-491-6159
•�Virtual�Equipment�and�Truck�AuctionThurs.,�Nov.��17,�2011-10AM
•�Virtual�Equipment�and�Truck�AuctionThurs.,�Dec.�15,�2011-10AM
STEFFES AUCTIONEERS INC.
www.steffesauctioneers.com�701-237-9173
•�Online�AuctionOpens�Nov.�1�–�Closes�Nov.�10�2011For:�AG,�Construction,Trucks,�Vehicles�&�More!
•�West�Fargo,�NDWed.,�November�30,�2011For:�Construction�Equipment,Trucks,�Semis�and�MuchMore!
•�Litchfield,�MNThurs.,�December�22,�2011For:�Construction�and�FarmEquipment
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com�419-865-3990
•�Bow,�NHThurs.,�November�17,�2011
•�Kissimmee,�FL
Mon.-Mon.,�February�6-13,2012
AuctionsComing
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 89
Liebherr’s LRH 100 OffersFlexible Hammer Design
The LRH 100 is the smallest representa-tive of the range of piling rigs with fixed andswinging leaders. The LRH 100 has a maxi-mum lifting capacity of 33,069 lb. (15,000kg) and its fixed leader achieves an effectivepile length of 62 ft. 4 in. (19 m). The LRH100 offers completely new leader kinematicsallowing radii of up to 28 ft. 8 in. (8.75 m)and inclinations of maximum 1:3 in alldirections.
The LRH 100 is equipped with a power-ful and emission-optimized 362 hp (270kW) Liebherr diesel engine and can be trans-ported in one piece with the hammer mount-ed. Basic machine and leader can be trans-ported in one piece. This allows for quickand easy transportation of the rig as well asflexibility in job site assignment. The heavi-est load when basic machine and leader aretransported separately is 32.5 ton (29.5 t).
The flexible hammer design of the LRH100 offers the possibility of mounting dropweights between 5,511 lb. (2,499 kg) and
15,432 lb. (7,000 kg). This guarantees opti-mum adaptation to the required pile type,whether it is a timber pile, concrete pile or aheavy steel pile. This ensures that the per-formance of the basic machine is ideallyconverted into high productivity, accordingto the manufacturer.
For more information, visitwww.Liebherr.com.
The LRH 100 is equipped with a power-ful and emission-optimized 362 hp (270kW) Liebherr diesel engine and can betransported in one piece with the ham-mer mounted.
CONSTRUCTION EQUIPMENT: JCB 426 Wheel Loader, C/H,2200 Hrs, 4WD, SHARP. JCB JS 200L Hydraulic Excavator,C/A/H, 4836 Hrs, Quick Coupler, w/ 24” 48” & 60” Buckets,Frost Hook, NICE. Kubota KX121-3 Mini Excavator, C/A/H,1221 Hrs, Quick Coupler, Thumb, w/ 24” 36” Buckets & KB500 Hydraulic Breaker, CLEAN. Case 550 E Crawler Dozer,Rops, w/ 6 Way Blade, 3212 Hrs. Case 455C Crawler Loader,Rops, 500 Hrs, New Motor in 2005. JD 455E Crawler Loader,O-Rops, D, Winch, GOOD U/C. Case W11 B Wheel Loader,C/H, 4WD, Low Hours, CLEAN. Case 580K Tractor Loader, w/Sims Cab, Heat, 96” Snow Bucket, New Torc Convertor in2009. ASV RC60 Track Skid Steer, C/H, Quick Coupler, 500Hrs, LIKE NEW. 09 Cat 252B Series II Skid Steer, C/H, 1000Hrs, NICE. JD 480 Forklift, 21’ Mast, Gas, 2WD, Rops, 4000Lb cap. AC40 Forklift, LPG, Rops, PS, Pneumatic Tires, 3Stage Mast, 4000 Lbs. Crown Electric Forklift, 1000 Lb cap.
COMPACT TRACTORS & LAWN & GARDEN & ATV: JD 4720Compact Tractor, C/H, MFWD, Hydro Trans, w/ JD X400 QTLoader, 1300 Hrs, SHARP. Kubota B7610 Compact Tractor,Hydro, 313 Hrs w/ Woods LS84 Loader, LIKE NEW. 08’ JD2305 Compact Tractor, D, Hydro, 60” Deck, 600 Hrs, 4WD,NICE. JD 4X2 Gator w/ Dump Box. JD 425 Lawn Tractor, 42”Deck, Cab, Collection System, Snow Blower, Weights &Chains. Kubota T1400 Lawn Tractor, 44” Deck, Hydro. 1964JD 110 Lawn Tractor (Collector). 50 Gal Lawn Sprayer, Pull-Type w/ B&S Motor.
DUMP TRUCKS: 98’ Volvo Quad Axle Dump Truck, CumminsM-11 Diesel, 8LL Trans, Quad, w/ Asphalt Pan, Strobes,Beacon, Good Rubber, CLEAN. 93’ MACK DM Quad AxleDump Truck, MACK Diesel, 8LL Trans, Quad, 500K Miles,Pintle Hitch, Strobes & Beacon, CLEAN. 93’ Ford LTL-9000Quad Axle Dump Truck, Detroit L-Series Diesel, 8LL Trans,
Quad, Air Suspension w/Tarp, 670K Miles, Asphalt Pan,Strobes & Beacon, NICE. 89’ IH 9300 Semi Tractor, Tandem,5,000 Miles on OH, New Rubber, Alum Headache Rack, Lights& Beacon, GOOD. 93’ Ford L-9000 S/A Day Cab Truck Tractor,8 Spd, D, Pintle Hitch, CLEAN. 84’ Ford F-800 S/A DumpTruck, Detroit V-8 Diesel, 5&2 Trans, 5 yrd Box, Pintle Hitch.
AERIAL BUCKET TRUCK: 95’ GMC Top Kick Utility BucketTruck, Cat 3116 Diesel, Auto Trans, w/ Al-Tec AM450-MH 48’Over Center Bucket, Low Miles, CLEAN.
(NOTE: ALL OF THESE TRUCKS HAVE BEEN THROUGH THESHOP, WELL MAINTAINED, & READY TO WORK.)
PICK-UP TRUCKS: 01’ Dodge 2500 Pickup, V-8 Gas, AutoTrans, 4X4, w/ 8’ Myers Commercial Plow, Extended Cab,Short Bed, 135K Miles. 01’ Ford F-150 ½ Ton Pickup, Gas,Auto Trans, 2WD, Extended Cab, Short Bed, 170K Miles. 00’Chevy 3500 Pickup, V-8 Gas, Auto Trans, 4X4, Crew Cab, w/Hiniker 8’ Snow Plow, 8’ Bed. 95’ Dodge 2500 Pickup, V-8Gas, Auto Trans, 4X4, Regular Cab, 8’ Bed, 90K Miles. 97’Chevy 3500 Service Truck, Gas, Auto Trans, 2WD, ExtendedCab, 8’ Service Body.
TRAILERS: 73’ 35T Tri-Axle Low Boy Trailer W/ Ramps, RearLoad. 11’ MTE 30’ Tandem Dual Trailer, 20,000 Lb Cap, PintleHitch, LIKE NEW. 02’ Hurst 10T Tag Trailer. 98’ US Cargo 14’Enclosed Trailer, T/A, Ramp Door. 08’ Load Trail 10,000 LbTag Trailer, Tandem, Ramps. 08’ Load Trailer 22’ 14,000 LbTilt Bed Trailer. Allegheny Power Powerable Reel Trailer, S/A,Hyd Reel Tilt.
MISC EQUIPMENT: NEW Stahl 8’ Service Body for Pickup. (2)MTE 10’ Contractors Dump Body Boxes for 1T Trucks. JD 965
Running Gear. 72” Skid Loader Rock Bucket. (3) 100 GalPortable Fuel Tanks for Pick-Up’s. (3) 1000 Gal Fuel Tanksw/Pumps. Harben Trailer Mounted Jetter w/ Diesel Engine,NEEDS WORK. Monroe Truck Mounted 1½ yard StainlessSteel Salter w/ B&S 11hp Motor. Geine Personal Man Lift.Scoot Crete T-70 Cement Buggy. (2) Pickup Tool Boxes.Walco Truck Mounted 1½ yard Stainless Steel Salter w/Electric Motor. MBW Foot Tamper. 1600 Gal Water Tank onSkids. Hydratek Hot Pressure Washer. Assorted Truck TiresMounted on Budd & Dayton Rims. Assorted Shop Tools.Assorted Building & Plumbing Supplies. Assorted Chains &Binders.
LANDSCAPE EQUIPMENT: Brillion SMT-8 Straw Crimper, 3ptor Skid Loader Mount, SHARP. Goossen 3pt PTO BaleChopper, LIKE NEW. Befco 3pt 50” Rototiller, LIKE NEW. BossSS 9’ Snow Blade w/ Trip Edge & Hyd Angle. CE-SS 8’ HydAngle Snow Blade. Grouser 84” HD Angle Dozer Blade forSkid Steer. McMillan Skid Loader Hyd Post Hole Digger. (2)Sets of Pallet Forks for Skid Loaders. (6) Assorted SkidLoader Buckets 60”-84”. Avalanche 14’ Snow Push Box Bladefor Wheel Loader. ProTec 8’ Snow Pusher Box Blade, NEW.Woods 3pt 5’ Rotary Mower. JD 3pt 72” Grooming Mower.MB 3pt Rotary Broom. MTE 72” 4-In-1 Bucket for Skid Steer,NEW. Grapple Attachment for Skid Steer Bucket. Ryan WalkBehind Aerator.
FARM EQUIPMENT: Case IH 5500 30’ Folding Grain Drill w/10” Spacing. Case IH 955 12-30RN Folding Planter.
GRAIN HANDLING EQUIPMENT: (4) Elevator Legs, 60’ & 90’.Ribbon 7 yd Feed Mixer. Hi-Capacity Roller Mill. (2) GravityBins on Legs. Assorted Bin Gates.
CONTRACTOR’S COMPLETE CLOSE-OUT AUCTIONMike Pusnik Enterprises
Saturday, November 5, 2011 – 9:30 A.M.459 DeBruin Rd. – Combined Locks, WI 54113 • Information: Mike Pusnik 920-460-5852
NOTE: ALL GRAIN HANDLING EQUIPMENT NEEDS TO BEREMOVED & DISMANTLED. TERMS TO BE ANNOUNCED
DAY OF AUCTION.
TERMS: Cash, Check, Credit Cards w/4% Convenience Fee. 5.5% Sales Taxwill apply to all non Ag related items.Photo ID is required to register.
ALL ITEMS TO BE SETTLED DAY OFSALE. PLEASE BRING A CURRENTBANK LETTER OF GUARANTEE.
(LOOK ON WEBSITE FOR SAMPLE LETTER)
***THERE WILL BE NOBUYERS PREMIUM.***
Dan S. Powers Powers Auction Service
Registered WI Auction Co. #91W8693 Hale Rd,
Browntown, WI 53522.608-966-3764 or 608-214-3765
For more photos, please visit our website: www.powersauction.com
NOTE: Mike Pusnik Enterprises is discontinuing their construction business and will sell this very well maintained fleet of equipment at auction. Equipment has been well cared for and has been on the job working every day.
Page 90 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Safety First...
AGC Plans to Launch New FallProtection Training Program
The Associated General Contractors ofAmerica will launch a new fall protectionsafety training program next year due to anew federal safety grant the association isbeing awarded. The association will use the$130,000 Susan Hardwood Training Grantfrom the U.S. Department of Labor to tack-le one of the most pressing safety issues inconstruction, officials said.
“The new training program will help uscontinue to make construction safer for mil-lions of workers,” said Stephen E. Sandherr,the association’s chief executive officer.“This is another sign of the commitment ourassociation and our members have toimproving construction safety.”
Sandherr said that while the overall num-ber of construction fatalities has declined bynearly 50 percent over the past five years,fall-related fatalities remain the singlelargest cause of construction deaths,Sandherr said. He noted that fatalities fromfalls accounted for 260 out of the 751 con-
struction fatalities reported in 2010, or near-ly 35 percent of the total.
The association head noted that the safe-ty program would provide comprehensiveinformation about fall protection for bothcommercial and residential construction. Headded that the association would offer thesafety program in eight different sites during2012 and expected to instruct as many as500 construction workers during the year.
Sandherr added that, in addition to thenew fall protection program, the associationalready offers a host of safety programs andmaterials that construction firms are takingadvantage of. These include in-seat safetytraining programs and making educationalmaterials available to construction firms.
“Any chance we get to improve safety forconstruction workers we are going to take,”Sandherr said. “After all, the constructionindustry is only as strong as its workers aresafe.”
New Holland Planson Shifting Focus toCompact Products
New Holland Construction announced Sept. 15 that inNorth America it will refocus on its strengths: the compactproduct lines for the landscaping, utility, residential con-struction and agriculture industries, among others.
As a result, starting in 2012 New Holland Constructionwill begin withdrawing from the North American market itscrawler dozers, motorgraders, 80 plus horsepower wheelloaders, 6 plus ton excavators and telescopic handlers. NewHolland Construction will continue to offer compact prod-ucts and associated attachments, including skid steer loaders,compact track loaders, tractor loaders, loader backhoes, com-pact wheel loaders and compact excavators.
This announcement only concerns the North Americanmarket, as New Holland Construction will continue to sellthe heavy equipment product lines in all other world markets.
“New Holland Construction’s heritage in North Americais a great source of pride and we are pleased with the successof our compact line. We are committed to providing ourNew Holland Construction customers with the superiorequipment performance they expect,” commented JimHasler, vice president of CNH Construction, North America.
For more information, call 262/636-6011 or visitwww.newholland.com.
HYDRO-MOBILE: (10) Hydro-Mobile M2 Mast Climbing Platforms; (13) Hydro-Mobile 18’ Bridges; (9) Hydro-Mobile 10’ Bridges;(98) 5’ Tower Sections; Hydro-Mobile M1 Platform; Dollies; LULL FORKLIFTS: 2006/2003 Lull/JLG 944E-42; (4) Lull 844C-42; (3) Lull 644B-42; SKID STEERS: New Holland LS160; New Holland LX565; Attachments; DOZERS: J. Deere 550 GTC; J. Deere450E; SCAFFOLDING: (800) 6’6”x5’ Frames; (1800) Braces; (3000) DI-65 10’ & 16’ Planks
A 10% Buyer’s Premium ONSITE; A 13% Buyer’s Premium ONLINE. Inspection: Mon., Nov. 7th, 9 A.M.-5 P.M. Joseph Finn Co., Inc., OH Lic. #2008000194
Terms, Photos, Information, Register to bid online at www.josephfinn.com
ONSITE - PUBLIC AUCTION SALE - ONLINE(10) HYDRO-MOBILE M2 PLATFORMS - BRIDGES – TOWERS – M1 PLATFORMLULL LIFTS – DOZERS – SCAFFOLDING - TRUCKS – FORKLIFTS – BOOM LIFT
KENNY HUSTON COMPANY – MASONRY CONTRACTOR26288 Ohio Route 159, Circleville, Ohio 43113TUESDAY, NOVEMBER 8th STARTING AT 10:30 A.M.
Nebraska Public Power District - Chet Harger - 308-386-5245, Sutherland & York, NE98 Melroe M-880 Power Module, 2 Cummins N14 Diesel Engines; 97 International 4800 70' Elliott Aerial Truck; 01 FreightlinerFL70 Puller Truck
ST Excavating Inc - Louis Rankine - 307-431-1912,Thermopolis, WY97 JD 200 LC Excavator, 8428 Hrs; 93 Kobelco SK 200Excavator, 9519 Hrs; Cat 420 D Extenda-Hoe, 1679.6 Hrs;Cat 140G Motor Grader, 3929 Eng Hrs; 77 Cat D6D Dozer,1056 Hrs; 00 Freightliner Conventional Truck; Cat D25CHaul Truck, 8621 Hrs; 98 Trail King 48’ Drop Deck Trailer;80 Cleme Belly Dump Trailer
www.bigiron.comUnreserved Auction ONLINE ONLY
Wednesday, November 9, 2011First Lots Scheduled to Close at 10:00 AM Central Time
NO BUYERS PREMIUM FEE and NO RESERVES!!
Laclede Gas - Mike Mevendez - 314-658-5553, St Louis, MO(2) 00 Freightliner MT45 Service Vans
L & B Oil Field Services Inc - Charlie Johnson - 307-660-9407, Gillette, WYBadger 888 Hydroscopic Track Hoe, 449 Hrs
335 Items Selling On This Auction!The next Big Iron auction is on November 23!
Sell your equipment on BigIron.com - Call Today- 1-800-937-3558BigIron.com is a division of Stock Auction Company, 1-800-937-3558
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 91
Online AuctionThursday, November 10
Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change.
Caterpillar 345BL Track Excavators (6)
Caterpillar 631E Motor Scrapers (13)
E-Ject E-45 Ejector Trailers (6)
Link Belt LS418A Lattice Boom Crawler Crane
Caterpillar 623F Elevating Motor Scrapers (4)
Caterpillar D9N Crawler Tractor
E-Ject SC-17-U Pull Scrapers (19)
2006 Caterpillar 631G Motor Scrapers (2)
Caterpillar D10N Crawler Tractors (2)
Caterpillar 627F Motor Scrapers (4)
Go to www.ironplanet.com to view the complete auction schedule, guaranteed inspection reports, and place your bids.
Featuring equipment from:
Page 92 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Kentucky Exposition Center Plays Host to 2011 ICUEE
Tim Keane (L) of Ditch Witch of Ohio, Western PA andWestern NY catches up with Brad Dudash of JessHoward Electric Co.
(L-R): Patrick Jennissen, Gary Knudsen, Roger Magers,Daniel “Boone” Larsen and Mike Flynn man the FellingTrailer booth.
Hammer Head Trenchless Equipment RegionalSales Manager Mark McMillion demonstrates hiscompany’s 2.5 in. Catamount piercing tool
Coleen Naylor and John Kane of J.J. Kane Auctioneersare having a great time talking to attendees aboutturning used iron into cash.
Efficiency Production’s Gary Stephens is readyto speak with attendees about trench safety.
Mississippi Valley Equipment Company’s John Henry (L) andKarl Bogle are eager to answer questions about pile drivingand drilling equipment.
IMT Director of Market Development John Cheshier (L) helps IMT Product ManagerTim Workman with the Dom 2, a 10,000-lb. crane. Darrin Harn of ALLU demonstrates the new D-series 3-yard soil screener.
from ICUEE page 70
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 93
Bank On It...
SANY America Chooses GECapital for Financing SolutionsSANY America has established a pro-
gram with GE Capital to expand wholesaleand retail financing solutions for distribu-tors and their end user clients. The newscomes as the U.S. based subsidiary ofChinese heavy equipment manufacturerSANY Heavy Industry continues to growits production and distribution base inNorth America.“Our company has outlined very aggres-
sive growth strategies in the NorthAmerican heavy equipment markets,” saidSANY America Finance Manager ScottMorrish. “As we accelerate the expansionof our dealer networks, our partnership withGE Capital will afford our customers awide variety of financing solutions,” headded.The announcement comes only months
after SANY Heavy Industry joined theFinancial Times Global 500 List, an annualranking of the world’s strongest firms bymarket capitalization. SANY Heavy
Industry’s financial stability, coupled withthe strength and flexibility of GE Capital,will allow dealers and end users to updateexisting fleets and add new products whilemaximizing profitability and value.“We are pleased to support SANY’s
expansion strategy by offering both attrac-tive inventory financing for SANY dealersand compelling retail financing for end-user commercial customers,” said KristiWebb, general manager, GE Capital, DealerFinance. “GE’s deep expertise and broadcoverage network in the heavy equipmentmarket makes us uniquely able to assistSANY as they build their U.S. business.”In late August, SANY America moved to
its new 400,000 sq. ft. corporate headquar-ters in Peachtree City, Ga. The facility fea-tures 60,000 sq. ft. of office space and340,000 sq. ft. of manufacturing area,where the company will assemble its line ofcrawler cranes, hydraulic excavators andconcrete pump trucks.
Page 94 • October 29, 2011 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
AIM ATTACHMENTS ....................................................................30
ALEX LYON & SONS AUCTIONEERS
COLUMBUS OH 11/5 .............................................................87
ALEX PARIS CONTRACTING CO INC .........................................9
ALTORFER CAT ...........................................................................35
AMERICAN STATE EQUIPMENT ................................................11
ARING EQUIPMENT CO INC ......................................................21
ARTIC SNOW & ICE CONTROL .................................................39
ASPEN EQUIPMENT ...................................................................45
AVALANCHE ................................................................................41
BARGAINS....................................................................................82
BAY-LYNX MANUFACTURING INC .............................................40
BIG IRON .....................................................................................90
BODINE MFG ...............................................................................30
BOMAG AMERICA’S INC ............................................................73
BOSS PRODUCTS ......................................................................40
BRANDEIS ...................................................................................10
CASE CONSTRUCTION .........................................................46,47
CEG SCALE MODELS ................................................................26
CK POWER ..................................................................................35
CLASSIFIEDS ...............................................................................83
COMPANY WRENCH ..................................................................18
CONSTRUCTION EQUIPMENT GUIDE ............................33,58,69
CUSTOM MADE PRODUCTS .....................................................18
DYNAPAC ....................................................................................77
E TIP INC .....................................................................................30
EAGER BEAVER TRAILERS .......................................................17
ERB EQUIPMENT ........................................................................49
ESSEX CONTRACTING ..............................................................10
FABCO EQUIPMENT INC .............................................................7
FABICK CAT ............................................................................15,48
FINKBINER EQUIPMENT CO ......................................................11
FLANGE LOCK ............................................................................10
FURY MOTORS ...........................................................................28
GEHL ............................................................................................66
GEITH ..........................................................................................32
GOMACO CORP ..........................................................................79
HITACHI MFG ..............................................................................62
HOWELL TRACTOR & EQUIPMENT CO ...............................57,96
HYUNDAI CONSTRUCTION EQUIPMENT .................................59
ILLINOIS TRUCK & EQUIPMENT .................................................3
IRON PLANET
ONLINE AUCTION 11/10/11 ...................................................91
JCB INC .......................................................................................43
JFW EQUIPMENT INC ................................................................74
JJ SCHECKEL CORP ..................................................................28
JOHN DEERE ..............................................................................53
JOHN DEERE SKID STEER ........................................................67
JOSEPH FINN CO INC
CIRCLEVILLE OH 11/08/11 ....................................................90
KOBELCO ...............................................................................24,25
KOMATSU AMERICA CORP ..................................................18,19
KOMATSU CO-OP ...................................................................54,55
KUBOTA SVL ...............................................................................60
LBX ...............................................................................................68
LEEBOY .......................................................................................81
MAULDIN PAVING PRODUCTS ..................................................75
MCCANN INDUSTRIES INC .........................................................6
NATIONAL TRACTOR PARTS .....................................................57
NORTRAX-MIDWEST ..................................................................13
NPK CONSTRUCTION EQUIPMENT INC ..................................27
NUSS GROUP .............................................................................29
PATTEN TRACTOR & EQUIPMENT CO .......................................2
POWERS AUCTION SERVICE
COMBINED LOCKS WI 11/05/11 ...........................................89
POWERSCREEN MW DEALER ..................................................23
PRO-TEC EQUIPMENT ...............................................................25
PRO-TECH ...................................................................................42
PURPLE WAVE INC
INTERNET AUCTION 11/17 ..................................................93
RDO EQUIPMENT ........................................................................31
RECKART LOGISTICS INC .........................................................88
RITCHASON AUCTIONEERS
LEBANON TN 12/10/11 ..........................................................93
RITCHIE BROS AUCTIONEERS
AUCTION CALENDAR ...........................................................95
ROAD BUILDERS MACHINERY & SUPPLY.............................6,20
ROLAND MACHINERY INC ...........................................................5
ROSCO MFG CO .........................................................................78
S R INDUSTRIES ........................................................................54
SNOW WOLF ...............................................................................42
SOUTHEASTERN EQUIPMENT CO ...........................................14
STAR EQUIPMENT LTD ................................................................6
SUBURBAN CHEVROLET ..........................................................16
TAKEUCHI ...................................................................................61
TOWMASTER INC ......................................................................84
VERMEER SALES & SERVICE ...................................................28
VOLVO COMPACTION ................................................................76
VOLVO CONSTRUCTION EQUIPMENT......................................65
WANTED .......................................................................................85
WEST SIDE TRACTOR SALES ..............................................25,74
WIRTGEN AMERICA ...................................................................80
YANMAR AMERICA .....................................................................63
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 29, 2011 • Page 95
USA MID-ATLANTIC 410.287.4330 NOV 2 DETROIT, MI 248.380.3800 * NOV 3 PITTSBURGH, PA 724.947.7240 NOV 8 FORT KNOX, KY 615.453.4549 NOV 10 DICKINSON, ND 507.774.5050 * NOV 10 CLEARFIELD, PA 410.287.4330 NOV 15 HOUSTON, TX 713.455.5200 NOV 16 & 17 LINCOLN, NE 816.633.4096 NOV 18 LAS VEGAS, NV 702.644.2468 * NOV 18 MINNEAPOLIS, MN 507.774.5050 DEC 2 SAN ANTONIO, TX 713.455.5200 * DEC 2 PHOENIX, AZ 602.269.5631 DEC 5 KANSAS CITY, MO 816.633.4096 DEC 6 COLUMBUS, OH 937.568.9500 DEC 6 OLYMPIA, WA 360.956.1500 DEC 6 ALBUQUERQUE, NM 505.836.0738 DEC 7 ATLANTA, GA 770.304.3355 DEC 7 HARTFORD, CT 860.684.1055 DEC 8 FORT WORTH, TX 817.237.6544 DEC 8 & 9 DENVER, CO 970.535.6700 DEC 13
Upcoming UnreservedPublic Auctions38
For complete and up-to-date equipment listings visit
» rbauction.com
AUCTION CALENDAR
DON’T MISS OUT.We are still accepting consignments for these auctions. Don’t miss out: call & take the hassle out of selling your equipment or trucks.
Flexible contract options All-inclusive service Competing on-site & online bidders Certain sale & payment dates
CANADA GRANDE PRAIRIE, AB 780.538.1100 NOV 22 & 23 SASKATOON, SK 306.933.9333 * NOV 30 MONTREAL, QC 450.464.2888 DEC 1 & 2 TORONTO, ON 1.800.357.0659 DEC 5 & 6 CHILLIWACK, BC 604.823.2700 DEC 13 TRURO, NS 902.895.3700 DEC 14 INTERNATIONAL TORREON, MEXICO +52.871.731.7424 NOV 9 ROME, ITALY +39.0523.818801 NOV 12 IPSWICH, AUSTRALIA +61.7.3382.4444 NOV 17 MEPPEN, GERMANY +49.5935.70550 * NOV 22 BRISBANE, AUSTRALIA +61.7.3382.4444 NOV 22 GEELONG, AUSTRALIA +61.3.5245.3333 NOV 24 MOERDIJK, THE NETHERLANDS +31.168.392.200 NOV 24 & 25 OCANA, SPAIN +34.925.157580 DEC 1 & 2 POLOTITLAN, MEXICO +52.427.266.0909 DEC 2 CAORSO, ITALY +39.0523.818801 DEC 6 ATHENS, GREECE +39.0523.818801 DEC 6 ST. AUBIN SUR GAILLON, FRANCE +33.2.32.77.86.10 DEC 8
* NOTE: NEW DATE – DATES ARE SUBJECT TO CHANGE