Upload
construction-equipment-guide
View
266
Download
12
Tags:
Embed Size (px)
DESCRIPTION
Midwest 17 2013
Citation preview
By Christine RecknerCEG ASSOCIATE EDITOR
When Independence Excavating, aCleveland-based full service site develop-ment and demolition company, heardabout the three freed woman who wereheld captive for a decade, it decided toraise donations in its office for the victims. The company, which was founded in
1956 by the DiGeronimo family, hasclose ties to the Cleveland communityand felt compelled to help in any way theycould. Yet Vic DiGeronimo, president, felt
they could do more. He reached out to thecity and offered IndependenceExcavating’s time and equipment, at nocost, to demolish Ariel Castro’s house, the
$3.00
4
“The Nation’s Best Read Construction Newspaper… Founded 1957.”
®
MMiiddwweessttEEddiittiioonn
The goal was to tear the house downand get the property filled in, gradedand seeded in a single day, accordingto Gus Frangos, president ofCuyahoga Land Bank, which super-vised the demolition.
Independence ExcavatingDemos Cleveland House
By Lori TobiasCEG CORRESPONDENT
A new report putting the so-called shadow inventoryof houses at a three-year low, and showing a decrease inforeclosures spells good news for the construction indus-try, economists said.According to a report by CoreLogic, a provider of
business data and analytics, “The overall shadow inven-tory is down 34 percent from its peak in 2010, when itreached 3 million homes, and down 18 percent from ayear ago, when it was at 2.4 million.”
Foreclosure DeclineSpells Good News
Towmaster Hosts 4th
Annual Expo…12
Students Begin Deere
Tech Program...50
Cat Machines Break
Ground at Daytona…14
Inside
By Brenda RuggieroCEG CORRESPONDENT
An art museum in Louisville,Ky., is currently at the beginningstages of a three-year, $60 millionexpansion project, with fundingcoming from private donations.
The construction manager isF.A. Wilhelm ConstructionCompany, and the project manag-er is John Grosvenor.Construction began in July 2013and is expected to be complete inthe fall of 2015. According to its Facebook
page, the Speed Art Museum,originally known as the J. B.Speed Memorial Museum, isKentucky’s oldest and largest artmuseum. It was founded in 1925by Hattie Bishop Speed as amemorial to her husband, James
August 17, 2013 • Vol. IXX • No.17 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910
www.constructionequipmentguide.comPublished Nationally
Previously completed phases include the enabling project, which involved installation of anunderground detention system, and the central utility building and decommissioning of existingsystems project, which involved a new utility building constructed to upgrade to cost-savingenergy efficient systems for the existing and new buildings.
$60M Speed Art Museum Expansion Under Way
An art museum in Louisville, Ky., iscurrently at the beginning stagesof a three-year, $60 million expan-sion project, with funding comingfrom private donations.see MUSEUM page 72
see INDEPENDENCE page 54
see HOUSING page 98
Table of Contents ............4
Attachment Section ............................................41-45
Trucks & Trailers Section..................................55-65
Recycling Section ....73-87
Business Calendar ........88
Auction Section ....92-101
Advertisers Index ........102
See page 20 for thefirst of an ongoingseries of highlightsfrom past ConExpos
as they were reportedin the pages of CEG.
ConExpoRetro
Page 2 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Please Contact Bob Williams or Jeff Speer 11200 W Silver Spring Rd. Milwaukee, WI 53225
800/353-1944 414/461-9100 www.FABCO.comOutside WI & Upper Michigan Within WI & Upper Michigan Hundreds of machines. Listings updated daily.
2001 Cat 345BL II..................................$64,500S/N AGS00921, 13,744 hours, EROPS, coupler,
GP-bucket, cylinders good, u/c good
2002 Cat 430D ......................................$43,500S/N BNK02538, 4741 Hrs, EROPS, 1.5 Cyd Bkt,
36” Bkt, Tires Good to Fair
1986 Cat D8L ........................................$77,500S/N 53Y04266, 15,980 Hrs, EROPS, Drawbar, SU
Blade, U/C 50% Eng & Trans Rebuilt at 11,000 Hrs
2008 Cat 140M ....................................$190,000S/N B9M00610, 3194 Hrs, EROPS, 14’ Blade,
Snow Arrangement, Tires Good
2008 Cat 950H ....................................$137,500s/n K5K02145, 10,472 hours EROPS, bucket, hyd coupler, cutting edge, 2 valve HL, AC
2006 Cat 966H ....................................$195,000S/N A6G00225, 7734 hours, EROPS, A/C, GP-bkt,
tires good, engine rebuilt at 7422 hours
2011 Cat 262C........................................$33,000S/N MST03900, 2295 Hrs, EROPS, A/C, Hyd Quick
Coupler, 2-Speed, Bkt, Tires Fair
2000 Aljon 81K ......................................$35,000S/N 13728, 13,500 Hrs, EROPS, Trash Blade, Terra
Wheels Good, Pumps Have Been Rebilt
2005 Cat 312CL......................................$86,500S/N CBA02430, 3285 Hrs, EROPS, A/C,
9’10” Stick, 36” GP Bkt
1985 Cat D7G ........................................$65,000S/N 92V13015, 5528 Hrs, OROPS, Sweeps, RearScreen, Winch, Angle Blade, U/C Close to Turn
Cat D6M LGP........................................$74,500S/N 2RN00542, 10,328 Hrs, EROPS, PAT blade, winch, rear screen, under carriage good
2001 Cat 988G ....................................$235,000S/N 2TW00170, 21,990 Hrs, EROPS, Spade Bkt
w/Teeth, Tires - 2 Good - 2 Fair
2006 Cat D6NXL..................................$117,500S/N CCK00690, 4756 hours, OROPS, rear screen, 4 valve hydraulics, PAT blade, UC very good
2010 Cat 980H ....................................$195,000S/N JMS05395, 14204 hours, EROPS, ride control,
bucket GP, tires good, center pins done
2007 John Deere 450DLC..................$125,000S/N 913245, 7155 Hrs, EROPS, UndercarriageGood SG Pads, Counterweight Removal, Bkt
1998 Cat 140H ....................................$115,000S/N 2ZK03040, 7242 hours, EROPS, heat,
A/C, tires fair, trans rebuilt
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 3
Largest Independent RentalFleet in the Midwest!
Illinois Truck & Equipment 320 Briscoe Drive Morris, Illinois 60450 www.iltruck.comToll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
Over 700 unitsavailable for rent!
Including: 125 Hydraulic Excavators
Long Reach Excavators
60 Bulldozers
50 Wheel Loaders
Mantis Cranes 30-100 Ton
30 Articulated Dump Trucks
On/Off Road Water Trucks
Long Reach Excavators
1
Long Reach Excavators
Hydraulic Excavators 125 Including:
leet in the MidFge Larrgest Independent
Long Reach Excavators
ors s
leet in the Mider Ovver
est Indep
eswwest!leet in the Mid unit7000
R pendent
est! units
entalR
30
Mantis Cranes 30-100 T
50 Wheel Loaders
60 Bulldozers
Articulated Dump T30
Mantis Cranes 30-100 T
50 Wheel Loaders
60 Bulldozers
rucks T r
on T Ton
ble fvailaa
eor r rent!ble f for r
ent!
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 wwwIllinois T
O O
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
O On/Off Road W rater Tru
ruck & Equipment
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
suckcks
320 Briscoe Drive
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 www
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected] & Equipment 320 Briscoe Drive Morris, Illinois 60450 www
oll Free: (800) 941-2133 Fax: (815) 941-1486 Email: [email protected] & [email protected]
Construction Equipment Guide Midwest Edition (ISSN 1081-7034) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.
Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send address changesto Construction Equipment Guide Midwest Edition, 470 Maryland Dr, Ft. Washington, PA 19034.
Contents Copyrighted ©2013, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.
Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occa-sionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any adver-tising.
IN THIS ISSUESPECIAL SECTION…RECYCLING, CRUSHING AND SCREENINGBe sure to check out this special section! Keep up to date with the latest information on recycling, crushing and screening.
FEATURES…TOWMASTER HOLDS 4TH ANNUAL EQUIPMENT,EDUCATION EXPOMore than 300 key people from MN-DOT, multiple county, township, andcity agencies, attended this event, which featured more than 30 exhibitors,and included four educational seminars.
CAT IRON HELPS BREAK GROUND ON HISTORICDAYTONA RISINGOn July 5, Cat machines participated in the groundbreaking of DaytonaRising, a historic $400 million redevelopment project at DaytonaInternational Speedway.
STATES EXPLORE WAYS TO FUND PROJECTS Faced with insufficient revenues and increased transportation infrastructureneeds, a number of states are exploring new ways to fund highway andbridge improvements.
NEW STUDENTS BEGIN JOHN DEERE TECHNOLOGY PROGRAMMurphy Tractor & Equipment Co. Inc. has sponsored a new class of students, who began the 74-week Construction & Forestry Technology program at Southeast Community College in Milford, Neb.
DUCK COMMANDER CHOOSES HYSTER LIFT TRUCKFOR DUCK CALLHyster Company has supplied one of its Hyster J35XN lift trucks to theduck-men of Duck Commander, makers of world-famous duck calls.
MORE THAN 400 ATTEND CHICAGO CAT AUCTIONSERVICES SALEMore than 400 people attended the Patten CAT hosted Cat Auction Servicessale on July 31 in Chicago, Ill. Approximately 30 percent of the equipment was sold to online buyers at the $5 million auction.
THOUSANDS OF BIDDERS ATTEND RITCHIE BROS.’SCHICAGO SALE More than 2,300 bidders participated online and in person at Ritchie Bros.Auctioneers’ multi-million dollar unreserved public equipment auction inChicago, ILL., on August 1.
66
50
16
14
12
73
88 BUSINESS CALENDAR88 CLASSIFIEDS92 COMING AUCTIONS
EQUIPMENT…41 ATLAS COPCO BC 3500 Bucket Crusher58 BUYERS PRODUCTS DumperDogg Dump Inserts
12
14
94
96
MIDWEST EDITIONCirculated Throughout • North & South Dakota • Nebraska
• Kansas • Minnesota • Iowa • Missouri• Illinois • Wisconsin • Michigan • Indiana • Ohio • Kentucky
Founder, Publisher & CEO Edwin M. McKeon Sr.Midwest Publisher Joseph S. McKeon
Editor In Chief Craig Mongeau Associate Editor Christine Reckner
Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton
Controller Tom WeinmannCirculation Mgr. Cathy Printz
Main office 470 Maryland Drive Fort Washington, PA 19034
215/885-2900 Toll Free 800/523-2200
Fax 215/885-2910Web site www.constructionequipmentguide.com
Editorial e-mail [email protected] e-mail [email protected]
For advertising rates Contact Joseph S. McKeon
•Illinois • Wisconsin • Northwest Indiana
• Missouri • Kansas
773/769-4090Toll Free 800/632-0233
Fax 773/769-4280e-mail [email protected]
Contact Ed Bryden• Central and Eastern Indiana • Michigan • Ohio
• Kentucky
440/268-9690Toll Free 800/810-7640
Fax 440/268-9691e-mail [email protected]
Contact Patrick Kiel • Iowa • Minnesota • Nebraska • North Dakota
• South Dakota
952/353-1770Toll Free 866/413-4265
Fax 952/353-2750e-mail [email protected]
73
94
96
® Mobile LinkedIn Facebook Twitter YouTube
To read these s tories and many more, vis it w w w .construct ionequipmentguide.com
Page 4 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 5
Concept Products CP2000, ’05 ................$13,500
Gomaco Commander III, ’03....................$69,500LeeBoy 1000D, ’03, 1,475 hrs ................$14,500Vogele 1110WB, ’05, 2909 hrs ................$69,500
Dressta 870, ’93, 8,157 hrs ....................$29,500Komatsu GD655-3C, ’06, 1,866 hrs ......$159,500Komatsu GD655-3EO, ’09, 1,287 hrs ....$189,500
Cat 534 Forwarder, ’10 ..........................$135,000Norco Puma 220, ’11, 78 hrs ....................$CALLNorco Puma 409, ’11, 2057 hrs ............$129,500Timbco 415FX, ’09, 2400 hrs ................$310,000Timbco 425EXL, ’06, 9,250 hrs..............$170,000Timbco 425EXL/Quadco Hotsaw, ’06 ....$225,000Valmet 415EX/Rolly II, ’05, 10,092 hrs $145,000Valmet 840.2, ’05, 6,600 hrs......................$CALLValmet 840.3/8, ’08, 10,006 hrs ............$190,000Valmet 860.4, ’12, 1,640 hrs......................$CALLValmet 860.4, ’12, 1,273 hrs......................$CALL
Doppstadt SM720, ’09, 235 hrs ............$185,000Doppstadt SM726, ’09, 257 hrs ............$225,000
Atlas Copco ROC F9-11, ’10 ......................$CALL
Cat D4D, ’72 ..............................................$7,000Cat D8N, ’87 ............................................$78,000Dresser TD8E, ’81 ....................................$13,000Komatsu D41E-6, ’00, 2,618 hrs..............$51,500Komatsu D51PX-22, ’08, 2,436 hrs ......$129,500Komatsu D61PX-15EO, ’12, 431 hrs ......$199,500Komatsu D65EX-17, ’12, 1,340 hrs........$229,500Komatsu D65PX-15EO, ’06, 3,199 hrs ..$146,500Komatsu D65PX-15EO, ’08, 5,372 hrs ..$127,500Komatsu D155AX-5, ’03, 6,809 hrs ......$224,500Komatsu D155AX-6, ’07, 6,011 hrs ......$279,500Komatsu D275AX-5, ’03, 23,015 hrs ....$129,500
Bomag BW130AD, ’88................................$3,900Bomag BW135AD, ’96, 5600 hrs ..............$8,500Bomag BW205AD, ’02, 3,520 hrs ............$34,500Cat CB534C, ’98, 5,086 hrs......................$26,500Hamm HD8, ’07, 395 hrs ........................$18,500Hamm HD8, ’07, 515 hrs ........................$18,500
Hamm HD14VV, ’09, 2,027 hrs ................$32,500Hamm HD14VV, ’07, 2,600 hrs ................$24,500Hamm HD14VV, ’07, 2,264 hrs ................$24,500Hamm HD90 Ozzy, ’04, 4,300 hrs ............$54,500Ingersoll Rand DD16, ’00, 2,006 hrs ........$9,500Ingersoll Rand DD70, ’98, 5056 hrs ........$14,500Tramac TR21A Plate (PC160) ....................$7,500
Wirtgen W60, ’08, 628 hrs ....................$144,900Wirtgen W60 Rumbler, ’11, 400 hrs......$240,000Wirtgen W600, ’03, 2,403 hrs..................$77,500Wirtgen W2000, ’96, 9,346 hrs ..................$CALLWirtgen W2100, ’04, 8,373 hrs ..................$CALL
Komatsu HD465-5, ’02, 17,763 hrs ............$CALLKomatsu HD465-5, ’02, 17,599 hrs ............$CALLKomatsu HD465-5, ’02, 17,268 hrs ............$CALL
Case 621D, ’02, 6,822 hrs ......................$59,500Cat 980C, ’86, 7216 hrs ..........................$59,000Cat 980G, ’98, 26,583 hrs ........................$89,500Komatsu WA65-3, ’04, 745 hrs................$59,500Komatsu WA200-5, ’05, 617 hrs..............$97,500Komatsu WA250-1, ’95, 17,158 hrs ........$29,500Komatsu WA250-5, ’05, 4,436 hrs ..........$97,500
Komatsu WA250-5, ’07, 4,885 hrs ..........$99,500Komatsu WA320-6, ’08, 3961 hrs..........$126,500Komatsu WA350-1, ’89, 13,117 hrs ........$27,500Komatsu WA450-6, ’07, 8,069 hrs ........$149,500Komatsu WA500-7, ’12, 2,696 hrs ............$CALLNew Holland LV80, ’05, 3028 hrs ............$19,500
Deere 225C LC RTS, ’06, 1,884 hrs ......$107,500Deere 350DLC, ’07, 5,837 hrs ..............$124,500Deere 350DLC, ’07, 5,276 hrs ..............$124,500Deere 350DLC, ’07, 6,514 hrs ..............$124,000Kobelco SK400LC Mark IV, ’97 ................$38,500Kobelco SK480LC, ’05, 11,858 hrs ..........$54,500Komatsu PC88MR-8, ‘09, 1,195 hrs ........$92,500Komatsu PC138USLC-8, ’09, 2,363 hrs $104,500Komatsu PC138USLC-8, ’09, 2,583 hrs $104,500Komatsu PC150LC-6, ’99, 6,800 hrs........$32,500Komatsu PC160LC-7, ’03, 4,397 hrs........$69,500Komatsu PC200LC-7, ’04, 5,830 hrs........$79,500Komatsu PC200LC-7, ’04, 740 Hrs ..........$89,500Komatsu PC200LC-7, ’05, 3,447 hrs......$129,500Komatsu PC200LC-8, ’06, 4,617 hrs......$132,500Komatsu PC220LC-6, ’96, 11,821 hrs......$39,500Komatsu PC220LC-6, ’98, 13,779 hrs......$34,500Komatsu PC220LC-6, ’98, 13,774 hrs......$32,500Komatsu PC220LC-8, ’06, 9084 hrs ........$96,500Komatsu PC300LC-7, ’06, 9,377 hrs........$94,500Komatsu PC300LC-7EO, ’06, 6,271 hrs $109,500Komatsu PC400LC-6LM, ’02, 10,834 hrs $72,500Komatsu PC400LC-7, ’04, 9,350 hrs......$108,500Komatsu PC400LC-7, ’04, 10,300 hrs......$99,500Komatsu PC400LC-7EO, ’06, 9,833 hrs $109,500Komatsu PC600LC-6, ’99, 9,634 hrs........$79,500Komatsu PC600LC-7, ’04, 8,449 hrs......$177,500Komatsu PC600LC-7, ’05, 10,328 hrs....$214,500Komatsu PC600LC-7, ’05, 4,265 hrs......$379,500Komatsu PC600LC-8, ’06, 10,478 hrs....$214,500Volvo EC210B, ’02, 8,880 hrs ..................$46,500Volvo EC460, ’04, 10,746 hrs ..................$69,500Volvo EC460, ’05, 10,958 hrs ..................$69,500
Komatsu HM300-2, ’06, 6,500 gal ........$275,000Komatsu HM400-2, ’07, 8,000 gal ........$395,000
EXCAVATORS
DOZERS
PAVING
COMPACTIONWHEEL LOADERS
ROCK DRILLS
WATER EQUIPMENT
AIR CURTIN DESTRUCTORS
GRADERS
FORESTRY
SHREDDERS, TROMMELS
OFF ROAD TRUCKS
MILLING
15 Roland Branch Locations in IL, IN, MI, MO, and WI
VISIT
ROLAND MACHINERY.COM
Call Jay Germann (217) 789-7711 • Email: [email protected]
Ingersoll Rand DD70, ‘98, 5056 hrs ........$14,500 Norco Puma 409, ‘11, 2057 hrs ..............$129,500
Financing Available for Qualified Buyers
Quality Used Equipment...with support to back it up
New Holland LV80, ‘05, 3028 hrs ..........$19,500 Komatsu PC200LC-7, ‘04, 740 hrs ................................$89,500
Page 6 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CX130 Excavator
$410/Day, $1,230/Week, $3,690/Month
CX240 Excavator
$700/Day, $2,100/Week, $6,300/Month
CX210 Excavator
$580/Day, $1,740/Week, $5,220/Month
CX460 Excavator
$1,235/Day, $3,705/Week, $11,115/Month
CX160 Excavator
$475/Day, $1,425/Week, $4,275/Month
CX330 Excavator
$875/Day, $2,625/Week, $7,875/Month
CX225 Excavator
$755/ Day, $2,265/Week, $6,795/Month
Excavator Rental Specials
Rent Today!
Clean, reliable equipment Competitive rates Rent by the day, week, or month Delivered to your job site
McCannOnline.com
IllinoisAddison
630-627-0000
Bolingbrook*630-739-7770
Chicago312-942-9200
Crestwood708-597-3110
McHenry*815-385-0420
Wauconda847-526-9444
IndianaSchererville*219-865-6545
* Case authorized dealer location
Serving the Constructor ®
2008 Ausa Dumper, s/n 09259426, 110 Hrs,1.37 Cu Yrd Dumper, 13 Hp Hatz Diesel,2wd ..................................................$7,000
2003 Case 60XT, s/n JAF0366712, 3000Hrs, Rops, Cold Start, 72” Bkt, 12 x 16.5Foam Filled Tires ............................$13,800
Now in stock and ready for your rental needs:Case CX350C 80,000 LB Excavator with auto coupler and Kent 6,000LB F35QT hydraulic breaker.
2005 Case 440, s/n N5M406598, 970 Hrs,Rops, Single Speed, 73” Bkt, 12 x 16.5Foam Filled Tires ............................$15,900
2011 Case SR200, s/n JAFSR200HBM430320,500 Hrs, Cab w/Heat & AC, Hyd Coupler, 72”Bkt, 12 x 16.5 Tires ........................$33,000
Mark Kruepke • (630) 739-7770Bolingbrook, IL
Contact us at [email protected]
View our complete Used & “Like New” inventoryat McCannOnline.com
McCann Rents a full line of heavy and light constructionequipment. Call us today to supply your next rental.
STARE Q U I P M E N T
LT D .
Call Sales 515-283-2215 • 800-352-54011401 2nd Ave • Des Moines, IA 50314
�CONSTRUCTION EQUIPMENT & SUPPLIESSINCE 1968
CHECK OUT OUR WEBSITE: www.starequip.comDes Moines • Ames • Cedar Rapids • Waterloo
Mustang 2054 Skid Loader2006, 3160 Hrs, 50 HP Yanmardiesel engine, cab, heat, and T-barcontrols. Unit is in good workingcondition, sold as is. #0073792309$13,995
Mustang ME1503 Excavator2005, 1088 Hrs, Mini Excavatorw/Open Canopy, 18 HP YanmarDiesel Engine, 7’9” Max DigDepth, Long Dipper Arm, RubberTracks, Unit # AD1401 $16,695
Allen Engineering 12SC75,2002, 30’ of Air Screed Completewith Oiler, # D7036K $1,595
Gehl RS5-34 ForkliftFoam Filled Tires w/40% Tread, Open ROPS, JohnDeere Diesel Engine, 48” Carriage w/48” Tines,Pilot Boom Controls and SAHR Brakes. Minor LightKit, #612592 $35,995
Gehl AL540 Articulated Wheel Loader2,500# Operating Cap., Cab, Heat and A/C, TwoSpeed, Great Visibility, Very Maneuverable, Lease+ Financing Available, #051796 $49,995
USED EQUIPMENT BARGAINS
Since 1985!
CALL JENNIFER TODAY!(888) [email protected]
www.RBusedParts.com
NEW, USED & REMAN PARTS• Undercarriage
• Arms & Booms
• Cylinders
• Valves
• Transmissions
• Pumps
• Engines
• and More!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 7
Milwaukee, WI1-800-236-6900Fax 414-541-1892
Wausau, WI1-800-242-7113Fax 715-675-9748
Crushing & Screening Div.Little Chute, WI1-800-236-8318Fax 920-788-6753
YOUR AUTHORIZED DEALER
in WISCONSIN and UPPER MICHIGAN for:
For information on our in-stock equipment, contact Lanny Peterson at:[email protected] or
mobile 1-715-574-8089 or 1-800-242-7113
AGGREGATE EQUIPMENTALLIS RT2448 PORTABLE JAW PLANT, 1993, with 24”x48” Jaw, 48”x20’ Vibrating Grizzly Feeder, Front DischargeConveyor, Six Hydraulic Legs, Tri-Axle Chassis, Cummins NT855 Diesel with Hydraulic Drives for Feeder & Conveyor............................................................................................................................................................................$185,000JCI K-300 “KODIAK” PORTABLE CONE PLANT, 300 hp electric motor, 36”x 20’ side discharge conveyor, 36”x 35’feed conveyor, motor control panel, hydraulic leveling......................................................................................$375,000POWERSCREEN 510 COMMANDER RINSER SCREEN PLANT, 11.8 Yd. hopper with hydraulic dump grizzly, 36” feedconveyor, 5x10 3-Deck screen, tandem axle, Deutz diesel ..................................................................................$52,400
EXCAVATORSDEMAG H95 MASS EXCAVATOR, Powered by a Cat 3408 Diesel, with a 24’7” Gooseneck Boom, and a 10’8”Stick with 43’6” Reach and 25’ Digging Depth, 7.2 cu yd HD Rock Bucket, Approx. 220,000 Lb. Working Weight,5800 Frame Hours and Recent Engine Rebuild......................................................................................$125,000LIEBHERR R974B HDSL UTILITY CRAWLER EXCAVATOR, Powered by a 471 HP Liebherr D9408TI Diesel,33’11” Semi-Gooseneck Boom with 15’5” Stick, 5 cu yd HD Bkt, 21’x14’ 4” Wide U/C with 30” Track Pads adnRemovable Sideframes, Approx. 190,000 Lb. Working Weight ....................................................................CALLLIEBHERR R954C HD “LITRONIC” CRAWLER EXCAVATOR, (Several 2006-2007 Models Available) w/VariousBoom/Stick Combinations and Buckets Available, 326HP Liebherr D936L Six-Cyl. Tier 3 Diesels, HydraulicallyRemovable Counterweights, 124,000 to 130,000 Lb. Working Weights ......................................................CALL
CRANESGROVE RT760 60 TON CAPACITY ROUGH TERRAIN CRANE, 1993, with Cat Diesel, 110’ Power-Pinned Boom,32’ to 56’ Telescopic Offsettable Swingaway, Main & Auxiliary Hoists, 29.5x25 Tires, Ready to work..$155,900GROVE TM9120 100 TON TRUCK CRANE, 1997, 42’ to 130’ boom, 33’ to 58’ offsettable telescopic swingaway,Grove HO50 main & aux. hoists, LMI, Cummins 6CT8.3 diesel, mounted on a Grove 8 x 4 chassis with aCummins N14 diesel and Roadranger transmissions. Tandem boom dolly ....................REDUCED TO $365,500GROVE RT855B 55 TON ROUGH TERRAIN CRANE, 1996, with Cummins diesel, 37’ to 115’ boom, 35’ to 60’swingaway, LMI, Grove model HO30 main & aux. hoists, 29.5x25 tires ..............................................$189,500LIEBHERR HS883HD DUTY CYCLE HYDRAULIC CRAWLER CRANE, 132 Ton Class, (2 Available) with LiebherrV8 Diesels, Main Hoists with 44,000 SLP or 66,000 SLP, 115’ Main Boom, Removable Sideframes ..........CALL
GROVE HYDRAULIC CRANES • PETTIBONE EXTENDO LIFTS and CARRY LIFTS
• LIEBHERR EXCAVATORS, MATERIAL HANDLERS, CRAWLERCRANES and HYDROSTATIC WHEEL LOADERS • GOMACO PAVERS • KOLBERG/PIONEER/
JCI AGGREGATE EQUIPMENT • SANDVIK and HAZEMAGCRUSHERS • MANITOWOC CRANES
LIEBHERR HS883HD DUTY CYCLEHYDRAULIC CRAWLER CRANEGROVE TM9120 TRUCK CRANE
Large Selection of New & Used Equipment in Stock.
View us at:www.amstate.com
Contact Marty in Illinois1-800-307-0221
Photos & Detail Descriptions view:
www.finkbinerequipment.com
CEDAR RAPIDS CR452 - ‘12 • Rubber Tired, Stretch 20E, Top Con System V, 400 Hrs..$256,183
CEDAR RAPIDS CR662RM - ‘10 • Mat. Transfer Vehicle w/ Hopper Insert, 1250 hrs......$249,982
CEDAR RAPIDS CR662RM - ‘11 • Mat. Transfer Vehicle w/Hopper Insert, 702 Hrs ........$358,300
MAULDIN 690F - ’05 • Gravity Feed 8-13 Foot, 590 Hrs ..................................................$18,950
MAULDIN 1500 - ‘03 • Track, Conveyor Fed, 8’-13’ Screed, 844 Hrs ................................$29,950
NEAL CART PAVER - ‘08 • 5’-8’ ........................................................................................$39,500
CALL items may be on rent causing pricing and hours to vary.
ROADTEC RX400 - ‘11 • 48” Cut, 4 Track, Front Loading, Mill w/803 Hrs ..........................$319,950
WIRTGEN W50 - ‘11 • 20” Cut, 3 Wheel, Rear Discharge Mill w/284 Hrs ......................$139,950
SAKAI SW800II - ‘11 • 67” Dbl Drm Vib, w/remaining standard and EPTW, 234 hrs ......$82,320
SAKAI R2H-2 - 3 Wheel Static Rollers, 83”, *(5) machines in stock starting at (2012 w/415 hrs)
............................................................................................................................................$CALL
SAKAI SW800II - ‘12 • 67” Double Drum Vibratory Rollers, w/85 hrs ..............................$94,393
SAKAI SW850-2 - 79” Double Drum Vibratory Rollers, *2011 w/99 hrs ..........................$99,500
SAKAI SW880 - 79” Double Drum Vibratory Roller, *2012 w/very low hours......................$CALL
SAKAI SW652 - 57” Double Drum Vibratory Roller, *2012 w/106 hrs..............................$82,495
SAKAI SW330 - 51” Double Drum Vibratory Roller, *2012 w/150 hrs..............................$32,487
SAKAI SW320 - 47” Double Drum Vibratory Roller, *2012 w/very low hours......................$CALL
SAKAI SW300 - 40” Double Drum Vibratory Roller, 2009 w/250 hrs................................$24,495
SAKAI GW750 - Vibratory Pneumatic Roller, *2011 w/494 hrs ........................................$99,782
*Comes with any remaining standard and 3 year extended power train warranty.
GRADALL XL4100 - ‘98 • Workable, As-Is ........................................................................$25,000
GRADALL XL4100II - ‘04 • Trk Mtd. Exc. w/2 Buckets, 5925 Hrs ....................................$129,950
MILLING MACHINES
ROLLERS
PAVERS / ROAD WIDENERS
EXCAVATORS
Page 8 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
USED EQUIPMENTAuthorized Bobcat® DealerBobcat 440 ................Starting at $4,500Bobcat 463’s ..............Starting at $8,000Bobcat 542B ..............Starting at $6,900Bobcat 642 ..............................$7,500Bobcat 642B ............................$8,500Bobcat 743 ................Starting at $8,000Bobcat 751 ......Several Starting at $9,900Bobcat 753 ..............Starting at $10,000Bobcat 763F, Series, Open Cab ....$11,500
Bobcat 773G, With Heat ............$15,900Bobcat 843, Heated Cab ............$10,000Bobcat 853’s ............Starting at $11,000Bobcat 863, With Heat ..............$12,900Bobcat 863G ............................14,900Bobcat 873 ............................$17,900Bobcat S130, 2006, Heated Cab ......CALLBobcat S185s, With Heat and Air, 500Hours to 5000 Hours....Starting at $14,900Bobcat S250..............Starting at $17,500
Compact Track MachinesBobcat T190’s............Starting at $17,500Bobcat T200..............Starting at $17,500Bobcat T250, Gold ......Starting at $24,500Bobcat T300..............Starting at $25,000Other BrandsGehl 4615 Skidloader, Open Canopy $8,500Mustang 2105 ............................CALLNew Holland L175........................CALLJohn Deere 250/260 Models Available....................................................CALL
ExcavatorsBobcat 331’s, Several w/Heat & Open
Canopys ..................Starting at $15,900
Bobcat 334 ................................CALL
Bobcat 337D, A/C, HT................$35,900
Bobcat 341 ..............Starting at $29,990
Bobcat 442 ....Several Starting at $45,000
Large Used Trailer Selection Starting at $1,500
Authorized Bobcat® Dealer
NEW M SERIES IN STOCK!
Bobcat Forestry Cutter on T320, for Rent
Largest Selection in the Midwest!
Bobcat Tractors in Stock Now!Call for Pricing.
Ask about Incentives and Financing.
Toolcats in Stock, Call for PricingNew Bobcat S590, Call for Pricing
U.S. Hwy 12 W • Dassel, MN 55325 320/275-2737 • Toll Free 888/679-4857New Location: Farm-Rite Wilmar 1515 West Litchfield Ave. • Wilmar, MN 56201 320/235-3672
www.farmriteequip.com
Bobcat Excavatorsin Stock, Call for Pricing
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 9
ALEX E. PARIS CONTRACTING COMPANY, INC.Route 18 - Atlasburg (Pittsburgh), PA 15004
724/947-2235 Day/Night Fax 724/947-3820Call Andy Miller Established 1928
Our Greatest Assets .. Our Employees
Cat IT28G, 1998, EROPS, coupler, 3rd valve, 20.5 x 25rubber, 15K hours, work ready . . . . . . . . . . . .$42,500Komatsu WA500-1, 1992, EROPS, w/ A/C, high-reach, 6.5 cy GP bkt, 29.5x25 . . . . . . . .$79,500John Deere 624G, 1996, EROPS, quick coupler, GPbkt, 20.5x25 tires . . . . . . . . . . . . . . . . . . . . . .$46,000Volvo L60E, 2005, EROPS, coupler, aux hyd, boomsusp, 20.5R25, v. good . . . . . . . . . . . . . . . . . .$89,500
IR SD100D Pro-Pac Vibratory Compactor, 1999,Hydrostatic trans 84" smooth drum, drum drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$52,500IR SD105DX, 2002, 84" drum drive, OROPS, very clean . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$74,500IR SD105DX, 2002, 84" drum, OROPS, clean $69,500IR SD150F, 84" Padfoot, 1998, OROPS . . . . .$49,500IR SD100D, 1996, Pro-Pac, 84" smooth w/pad kit,ROPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$62,500Cat 815B, 1993, OROPS, S-Blade w/Tilt, Good Feet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$68,000Cat 815F, 1998, EROPS, w/ A/C, s-tilt, good feet, verynice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$205,000(4) Cat 825C’s, 1981-1990, EROPS, S-blade w/tilt, allwork ready . . . . . . . . . . . . . . . . . . . . . .From $79,500Multiquip MR8G Walk Behind Vibratory Compactor,1997, Briggs & Stratton 8 HP gas engine . . . . .$2,500Rammax Walk Behind Rollers, over 25 in stock, lever& remote . . . . . . . . . . . . . . . . . . . .$4,000 to $10,000(8) Sheepsfoot, 48" and 60", double drum & singledrum, tow type . . . . . . . . . . . . . . . . . .$4,000 - $6,500
Case/IH 485 Utility Tractor, 1986, Case 3 cyl dslengine, 55 gal water tank . . . . . . . . . . . . . . . .$10,500Case/IH 385 Utility Tractor, 1987, 3 cyl dsl engine, 72"hydraulic broom . . . . . . . . . . . . . . . . . . . . . . .$11,500Rome TRCH16 Disc, hyd offset disc, 16 ea 32” dia, Hydangle tongue, scrapers, 2” axles . . . . . . . . . . . .$9,500
Cat 953LGP, 1984, OROPS, 20 DBG, GP Bkt .$37,500Cat 963, 1983, OROPS, 2.6 cy GP bkt, 17” DBG pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$46,000
Volvo A40, 1998, 40 tons, 10991 hrs, 395 hp, 8WD,29.5R25, A/C, 29 cy cap. sideboards, tailgate (current-ly off work), work ready . . . . . . . . . . . . . . . .$127,500Volvo A40, 1996, 40 tons, 395 hp, 6WD, A/C, 29.5R25,working everyday . . . . . . . . . . . . . . . . . . . . .$145,000Volvo A40, 1996, 40 tons, 11,000 hrs, 6WD, 20.5R25,A/C, P/S trans, 29 cy cap., 6/06 hitch rebuilt $115,000Volvo A40, 1995, 40 tons, 395 hp, 8WD, 29.5R25, A/C,P/S trans, tailgate, work ready . . . . . . . . . . .$115,000Volvo A35C, 1998, 35 tons, 6WD, 26.5R25 tires,approx 7,000 hrs, good condition . . . . . . . .$147,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5x25, A/C,P/S trans, working everyday on jobsites . . . . .$87,500Volvo A35, 1995, 35 tons, 326 hp, 6WD, 26.5R25, A/C,P/S trans, 26 cy, working everyday on jobsites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$89,000Volvo A30C, 1996, 30 tons, 11,000 hrs, 296 hp, 6WD,23.5R25, 21 cy cap, A/C, P/S trans, works everyday . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$122,500
(2) Cat D6TXW, 2008, ROPS w/sweeps, a-blade,winches, v. good . . . . . . . . . . . . . . . . . .$175,000 Ea.Cat D8N, 1991, ROPS, drawbar, S-U blade . .$85,000(2) JD 450G, 1996, wide tracks, ROPS, PAT blade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,000 Ea.
Broderson IC80-2E, 1997, 8.5 ton, 24’ boom, dual fuel,10.00R15 tires, 3,400 hrs . . . . . . . . . . . . . . . .$21,500Grove RT58C, 1981, down cab, 18 ton r.t., 70' boomanti-two block, GM dsl, clean . . . . . . . . . . . . .$49,500
Cat 613C Water Wagon, 1994, 5000 gal drop tank,ROPS, spray heads . . . . . . . . . . . . . . . . . . . . .$49,500Cat 621F, 1996, Scraper, OROPS, 33.25x2, very goodcondition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALLCat 621E, 1989, Scraper, OROPS, 33.25x29, very nice
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .CALL
JD 490E, 1994, 9'11" stick, Aux. hydraulics, quick cou-pler, 6-7000 hrs, Fleet maintained . . . . . . . . .$29,000Gradall-Hopto 300, 1968, G.M. diesel UP, on rubber,operational . . . . . . . . . . . . . . . . . . . . .$10,500/OFFER
Komatsu PC200 LC-6, 1996, 32" pads, 42" Bkt, longstick . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$39,500Komatsu PC200 LC-6, 1996, 24" pads, 9'7" stick, 44"Bkt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$43,500Komatsu PC150 LC-6K, 1998, 8'7" stick, 30" bkt, 27.6"TBG pads, work ready . . . . . . . . . . . . . . . . . . .$57,000(5) Komatsu PC128UU, 1996, offset boom, rubber tracks, low hrs . . . . . . . . . . . . . . . . . . . . .CALLKomatsu PC160 LC-7KA, 2004, 24” TBG pads, JRBcoupler, plumbed, 8’6” width, nice, work ready . .CALLVolvo EC460B LC, 2003, 4600 hrs, 23’ boom, 11’ stick,5.12 cy bkt, 22,000# ctwt, hammer/shear plumbingvery good condition . . . . . . . . . . . . . . . . . . .$159,000
(2) 48' Box Vans w/Liftgates, Good Condition . .CALL
IR 185’s, JD diesels . . . . . . . . . . . . . . . . . . . . . .CALL
(12) Allmand Light Plants, 2008-2010, diesel, s/a tow-type, (4) MH lights, excellent . . . . . . . . .From $5,200
Case 580L Rubber Tire Loader Backhoe, 1997,OROPS, std stick, 24" bkt . . . . . . . . . . . . . . . .$24,500
John Henry Drill Mtd on Cat 320N, 1994, 24' mast,Duraquip dust collection . . . . . . . . . . . . . . . .$150,000
(2) Balderson Broom Attachment for Cat IT Machines,8' wide, good condition . . . . . . . . . . . . . . .$4,000 Ea.
BUCKETSPC1000, 84" Digging Bucket . . . . . . . . . . . . . .$9,500Over 100 Excavator, Loader, Specialized & Grapple
Buckets in Stock-Call For Your Needs
FORKS(8) IT28F/G Forks, Balderson qc, 48"-60" pallet style,excellent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$4,000
Others Available CallPrices Are Negotiable - At Your Inspection
All Equipment is Owned & Operated By ALEX E. PARIS CONTRACTING CO., INC.
TRUCKS & TRAILERS
CRAWLER LOADERS
OFF ROAD HAULERS
MOTOR SCRAPERS
DRILLS
ATTACHMENTS
MISCELLANEOUS
WHEEL LOADERS
HYDRAULIC EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
LANDSCAPING
CRANES
SPECIALS
BACKHOES
AIR COMPRESSORS
Page 10 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Volvo Construction Equipment
USED EQUIPMENT
Asphalt / Pavers / ConcreteEquipment1999 LEEBOY L8500T............................$7,5002007 VOLVO PF6110, 2375 Hrs ............$160,0002007 VOLVO PF6110, 3061 Hrs ............$160,0002008 VOLVO PF6110, 2431 Hrs ............$185,0002007 VOLVO PF6170, 1451 Hrs ............$230,000
Compactors-Padfoot2006 INGERSOLL-RAND SD122F ............$97,000
Compactors-Smooth Drum2010 VOLVO DD112HF, 1636 Hrs ............$85,0002008 VOLVO DD118HF, 1858 Hrs ............$90,0002007 VOLVO SD116DXTF, 4921 Hrs..........$65,000
Excavators-Crawler2008 VOLVO EC210C LC, 2369 Hrs ........$115,0002011 VOLVO EC210CL, 1931 Hrs ..........$145,0002011 VOLVO EC240C LC, 2069 Hrs ........$160,0002006 VOLVO EC290B LC, 7836 Hrs ..........$65,0002011 VOLVO EC290CL, 3009 Hrs ..........$165,0002011 VOLVO EC340DL, 2753 Hrs ..........$230,0002012 VOLVO EC340DL, 2342 Hrs ..........$260,0002011 VOLVO EC380D, 1806 Hrs ............$265,0002011 VOLVO EC460C LC, 2994 Hrs ........$280,000
Excavators-Wheel2002 VOLVO EW170, 7055 Hrs ..............$55,0002004 VOLVO EW180B, 3060 Hrs..............$70,0002011 VOLVO EW180C, 1677 Hrs ............$155,0002011 VOLVO EW180C, 2528 Hrs ............$155,000
Loader Backhoes2003 DEERE 310SG ............................$20,0002004 DEERE 310SG, 4088 Hrs................$24,000
Motor Graders2008 VOLVO G930, 3913 Hrs ................$120,0002009 VOLVO G930, 2663 Hrs ................$120,0002008 VOLVO G940, 2770 Hrs ................$155,0002011 VOLVO G946B, 1855 Hrs ..............$245,000
Off-Highway Trucks2006 CATERPILLAR 740, 10624 Hrs ......$165,0002004 VOLVO A25D, 5389 Hrs................$190,0002006 VOLVO A25D, 7177 Hrs................$120,0002007 VOLVO A25D, 6328 Hrs................$155,0002010 VOLVO A25F, 1727 Hrs ................$285,0002011 VOLVO A25F, 2095 Hrs ................$285,000(4) 2006 VOLVO A30D, 4710-10654 Hrs ....................................................$105,000-$215,0002008 VOLVO A30E, 6402 Hrs ................$175,0002008 VOLVO A30E, 7088 Hrs ................$175,0002011 VOLVO A30E, 2746 Hrs ................$310,000
2005 VOLVO A40D, 6024 Hrs................$155,0002006 VOLVO A40D, 10,080 Hrs ............$130,0002009 VOLVO A40E, 3462 Hrs ................$330,000(5) 2010 VOLVO A40E, 1514-2709 Hrs ......................................................$390,000-$395,000(8) 2011 VOLVO A40E, 3092-4032 Hrs ......................................................$350,000-$375,0002007 VOLVO A40E FS, 5601 Hrs ............$265,000(9) 2011 VOLVO A40F, 1814-6047 Hrs ......................................................$345,000-$425,000(7) 2012 VOLVO A40F, 1539-2123 Hrs ......................................................$440,000-$480,0002005 KOMATSU HM400........................$81,000
Scrap Processing/Demolition Equipment2012 SENNEBOGEN 825M ..................$366,0002006 SENNEBOGEN 830R HD ..............$235,0002012 SENNEBOGEN 840M ..................$593,0002012 SENNEBOGEN 840M ..................$644,000
Sweepers/Broom Equipment2010 BROCE MK I ..............................$93,750
Wheel Loaders2009 CASE 921E ..............................$125,0002006 CATERPILLAR 930G ....................$68,5002001 CATERPILLAR 950G, 11050 Hrs ......$80,0002001 CATERPILLAR 950G, 10695 Hrs ......$80,0002008 CATERPILLAR 962H, 3843 Hrs ......$170,0001998 CATERPILLAR 980G II, 21984 Hrs ....$62,5002006 VOLVO L60E, 11591 Hrs ................$55,0001996 VOLVO L70C, 16602 Hrs ................$32,0002007 VOLVO L70E, 5532 Hrs..................$90,0002007 VOLVO L70F, 5951 Hrs ................$110,000(3) 2012 VOLVO L70G, 2600-2687 Hrs ......................................................$148,000-$160,0002012 VOLVO L90G, 1591 Hrs ................$165,0002012 VOLVO L90G, 2553 Hrs ................$170,0002010 VOLVO L110F, 5170 Hrs ..............$145,000(3) 2011 VOLVO L110F, 3018-5034 Hrs ....................................................$145,000-$180,000(3) 2012 VOLVO L110G, 2306-2502 Hrs ....................................................$225,000-$230,0002006 VOLVO L150E, 31062 Hrs ..............$70,0002009 VOLVO L150F, 5508 Hrs ..............$205,0002010 VOLVO L150F, 8029 Hrs ..............$160,0002010 VOLVO L150F, 11459 Hrs..............$140,000(5) 2011 VOLVO L150G, 1487-2969 Hrs ....................................................$260,000-$280,0002010 VOLVO L180F, 1634 Hrs ..............$265,0002012 VOLVO L180G, 1978 Hrs ..............$335,0002012 VOLVO L180G, 2334 Hrs ..............$325,0002003 VOLVO L220E, 15635 Hrs ..............$90,0002011 VOLVO L350F, 1812 Hrs ..............$685,000
North Dakota: Bismarck
FargoMinot
North Carolina: CharlotteRaleigh
AshevilleGreenville
South Carolina: Columbia
North CharlestonPiedmont
Georgia: Buford
Forest ParkSavannah
Tennessee: Knoxville
Chattanooga
Your VOLVO dealer inThe Carolinas • Georgia • East Tennessee • North Dakota
www.ascvolvo.com
(5) 2010 Volvo A40E, 1514-2709 hrs,$390,000 - $395,000
(2) 2007 Volvo T450D, 1530-1632 hrs,$225,000 Ea.
2011 Volvo EW180C, 1677 hrs, $155,000
2012 Volvo L90G, 2549 hrs, $170,000
2011 Volvo L150G, 1937 hrs, $280,000
(2) 2012 Volvo A40F, 1580-1730 hrs,$440,000-$460,000
2011 Volvo EC380D, 1806 hrs, $265,000
(2) 2009 Volvo G930, 2663-3623 hrs,$120,000 Ea.
(3) 2011 Volvo L110F, 3055-5034 hrs,$145,000-$180,000
Doug Wilson 704-562-2032
Email: [email protected]
Billy Brice 678-318-9500
Email: [email protected]
Elon Holley 334-450-7667
Email: [email protected]
ASC has the largest supply of Tier 3 Articulated Trucks in inventory, call for more details.
2006 Volvo EC160B LC, 1900 Hrs, $80,000
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 11
Volvo Construction Equipment
YOU CHOSE GUARANTEED* FUEL EFFICIENCYWITH EXCEPTIONAL DEALER SUPPORT.
Smart works.* Ask about our Fuel Effi ciency Guarantee by contacting a Volvo dealer near you, or visit volvoce.com/NAFuel to learn more.
www.ascvolvo.com
CORPORATE704-494-8100
GEORGIABuford
678-318-9500Savannah
912-964-8079Forest Park770-319-0074
NORTHCAROLINA
Asheville828-687-0620Charlotte
704-596-8283Greenville
252-754-5280Raleigh
919-661-8710
SOUTHCAROLINACharleston843-414-1120Columbia
803-791-0740Piedmont
864-704-1060
TENNESSEEChattanooga423-308-7940Knoxville
865-525-1845
NORTHDAKOTABismarck
701-250-4882Fargo
701-250-4882Minot
701-250-4882
Page 12 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Towmaster Inc., manufacturer ofequipment trailers and truckbodies/equipment, held its 4th Annual
Equipment and Education Expo on July 16.More than 300 key people from MN-DOT,multiple county, township, and city agencies,attended this event, which featured morethan 30 exhibitors, and included four educa-tional seminars all focused on the needs ofthe local and statewide transportation field.“This expo has become a huge event for
Towmaster and its partners,” said TimErickson, Towmaster Truck Equipment salesmanager. “It builds and solidifies relation-ships between us, our suppliers, and our cus-tomers, as well as offers ongoing educationand information vital to the various mainte-nance departments of cities, townships,
counties, and the state of Minnesota.”Towmaster partnered with representatives
from Omaha Standard/Palfinger, FallsPlows, Valley Blades Ltd., Force America,Whelen, Astleford International, BoyerTrucks, and Swenson Products, by sponsor-ing this event. Attendees learned about trail-er payload and GVWR requirements, DOTCommercial Motor Vehicle regulations,upcoming crane operator certificationrequirements, and cutting edges, fromattending the educational seminars. A lunchwas provided and prizes were given away,including a $4,000 Swenson Spreader to onelucky municipality.“This event has grown over the last four
years and it’s something unique toTowmaster,” said Len Stulc, president of
Towmaster. “Our employees pulltogether as a team and work hard tomake this event positive and suc-cessful. Our partners help in atremendous way and all theexhibitors told me it was a greatevent for them.”Towmaster uses this event as an
opportunity to network and buildpositive and ongoing relationshipswith both supplier partners andcustomers.
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.)
Towmaster Holds 4th Annual Equipment, Education Expo
Steve London (L) of Inver Grove Heights, Minn., andCounty Engineer Ronald Mortensen take a look at thepopular DD13 engine of this Freightliner 1145D.
Palfinger had a great truck-mounted crane on hand, the Palpro 43, with fullyproportional controls, maintenance free with a hexagonal extension systemthat gives the setup its strength. Mario Hufnagl (L)and Andrew Schumacher of Palfinger, Omaha, Neb.,point out all of the features.
Outside in the sun doing his best not to melt is JayKockler, sales with Farm-Rite, Dassel Minn., with a2013 Bobcat all-wheel steer 2-speed A770.
This 2014 Mack truck is decked out just right for thecrew from Yellow Medicine County in southwestern,Minn. (L-R) are Mechanic Trer Luepke, MaintenanceForeman Jim Marquardt and Shop Foreman DaveMoset.
Huge crowds attended the Towmaster 4th Annual Equipment and Education Expo.
(L-R): Craig Schmieg and Mark Bellamore of Chaska,Minn., look over this John Deere 644K hybrid loaderwith RDO Equipment Specialist Dan Rud, Burnsville,Minn.
see TOWMASTER page 36
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 13
JD 400D, 1183 hours,Warranty, #U11426..............................$389,000
JD 600CLC w/ GenesisGXP1200R Shear,#U10798 ........$468,000
NPK Hammers, AllSizes for All Makes.Inspected and WellMaintained, GH4-GH18
JD 210CW, 2 PieceBoom, Aux Hyd,#U11722 ........$148,000
JD 9530, Auto Load,1045 hours, Warranty,#U11750 ........$269,000
JD 444K, 2.5 yd Bkt, 85 hours, Warranty,#U11423 ........$143,000
JD 350DLC, 13' 1" Arm,32" Pads, #U11915 ............................$209,000
JD 824K, 6 yd Bkt,#N5289 ..........$285,000
JD 350GLC MaterialHandler, #N5539 ................................$525,000
JD 200DLC, 9' 6" Arm,32" Pads, Mech Thumb,#U11358 ........$149,000
JD 850K, 24" Pads,128" Blade, 1494 hours,#U11857 ........$268,000
JD 310SJ, Cab, Air,4x4, Ext Hoe, #U11221........................$74,500
JD 400D, New KLEIN8000 gallon water truck,6391 hrs, #U11425..............................$258,000
JD 672D, Low Cab, Air,14' Blade, #U11856 ............................$198,000
JD 844J, Cab, Air, 7.25 yd, 2170 hours,#U11039 ........$259,000
Cat Iron Helps Break Ground on Historic Daytona RisingOn July 5, Cat machines participated in
the groundbreaking of Daytona Rising, ahistoric $400 million redevelopment projectat Daytona International Speedway. Thesignificance for Daytona parent companyInternational Speedway Corporation (ISC)and Caterpillar Inc. is the long-standing 20-year partnership between the two compa-nies. Additionally, the project marks thelargest redevelopment ever at ISC’s 54-year-old flagship motorsports facility and is thefirst time a Cat 336E H hydraulic hybridexcavator has been used for such a signifi-cant undertaking.“There’s no better way to showcase our
machines than through participation in theDaytona Rising groundbreaking,” said GregTowles, manager of the Cat racing program.“When ISC asked us what machines wouldmake sense for an event and project like this,we immediately thought of our new state-of-the-art hydraulic hybrid excavator.”As part of the event, current and former
NASCAR stars were pitted against each
other in a competition to see who would winthe opportunity to pilot the 336E H and actu-ally break ground at Daytona. Current driv-ers Jeff Burton and Ryan Newman andTrevor Bayne and Greg Biffle competedagainst former NASCAR greats DarrellWaltrip and crew chief Larry McReynolds ina unique relay race. Each had to operate aCat 950K wheel loader safely through acourse with skill and speed, and the team ofBayne and Biffle came out on top.“When I was approached to do the com-
petition, I was excited because we use Catequipment at my rock quarry business inVirginia, and I understand the importanceof owning fuel-efficient equipment,” saidBiffle. “We have a Cat 980 wheel loader, soI may have had the upper hand. Trevor andI spent time strategizing because we want-ed to win and be the first in the seat of thenew hybrid. Being the first person to usethe hybrid to break ground for the newgrandstands at Daytona was truly anhonor.”
The vision for the redevelopment of theDaytona International Speedway places anemphasis on enhancing the complete fanexperience while celebrating the history ofthe speedway and its many unforgettablemoments throughout more than 50 years ofracing. Every seat will be replaced withwider and more comfortable seats, and morerestrooms and concession stands will beadded throughout the facility. Before that work begins, however, site
preparation using more Cat gear will takeplace. And that’s where Mark Scott, presi-dent of RA Scott Construction, comes in. Hiscompany now owns the 336E H hybridexcavator used in the groundbreaking andmany other Cat machines. “Over the next 90 days or so, our compa-
ny will be removing existing utilities andinstalling new storm, sewer, and water linesfor the speedway,” said Scott. “We’ll beusing the 336E H hybrid excavator alongwith a standard 336E, a 320E, a 314E, twoD3Ks and three 938Ks. We are really look-
ing forward to seeing the fuel savings fromthe new hybrid Cat.”The redevelopment is expected to be
complete by January 2016 — just in time forthe 58th Daytona 500.“The redevelopment of Daytona
International Speedway reaffirms its statusas the ‘World Center of Racing’ for years tocome,” said Lesa France Kennedy, ISC vicechairperson and CEO and granddaughter ofNASCAR co-founder Bill France Sr. “It isimperative that we build upon my grandfa-ther’s vision to create a world-class facilitywith premium amenities to provide unparal-leled experiences for our guests and partners.Doing so will ensure that the Daytona 500and all our other events continue to drive ourbusiness while serving as a significant eco-nomic engine for the region.”For more information, visit www.day-
tonarising.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
NAPA Awards Industry Leaders Operational Excellence HonorsThe National Asphalt Pavement
Association (NAPA) honored the winnersand finalists of its 2012 OperationalExcellence Awards on July 15 during theassociation’s midyear meeting in Boston.The Operational Excellence Awards
honor leaders in the asphalt pavement indus-try for innovation and excellence in market-ing, communications and community out-reach with the Community Involvement,Outstanding Brochure and Outstanding Website awards. Companies also are lauded fortheir responsible practices with the AsphaltOperations Safety Innovations andEcological awards.The 2012 winners are:• Asphalt Operations Safety Innovations
Award: The Lane Construction Corp.,
Cheshire, Conn., for temporary median-access bridge and ramp system.• Community Involvement Award:
MeadWestvaco Corp., North Charleston,S.C.• Community Involvement Award: Tilcon
New York Inc., an Oldcastle Materials Co.,Wharton, N.J.• Ecological Award (New Plant):
Lakeside Industries, Lacey, Wash., forDurgin Road Asphalt Plant.• Ecological Award (New Plant): Tilcon
New York, an Oldcastle Materials Co.,Wharton, N.J., for Keasbey Asphalt Plant.• Ecological Award (Existing Plant):
Payne & Dolan Inc., Vienna, Wis., forVienna Control #6 Plant.• Ecological Award (Existing Plant): S.T.
Wooten Corp., Wilson, N.C., forWilmington Asphalt Plant.• Outstanding Brochure Award:
Commercial Asphalt Co., Maple Grove,Minn.• Outstanding Brochure Award: APAC
Mid-South Inc., an Oldcastle Materials Co.,Birmingham, Ala.• Outstanding Web site Award (Producer
Member): Superior Paving, Gainesville, Va.,for www.superiorpaving.net.• Outstanding Web site Award (Associate
Member): Gray & Son Inc., Timonium, Md.,for www.graynson.com.• Outstanding Web site Award (State
Asphalt Pavement Association): FlexiblePavements of Ohio for www.flexiblepave-ments.org.
The Operational Excellence Awards are acounterpart to the annual Quality inConstruction Awards, which recognizeasphalt paving jobs completed in line withbest practices and standards known to yieldhigh-quality asphalt pavements.The NAPA Awards Program recognizes
and encourages continuous improvement inall aspects of paving and asphalt operations.The 2013 NAPA Awards program is nowaccepting nominations. Quality inConstruction Award nominations are due byOct. 31; Operational Excellence Awardnominations are due by Dec. 9.For more information, visit
www.AsphaltPavement.org/Awards.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
As part of the event, current and former NASCAR stars were pitted against eachother in a competition to see who would win the opportunity to pilot the 336E Hand actually break ground at Daytona. Each had to operate a Cat 950K wheelloader safely through a course with skill and speed.
A $400 million redevelopment project is under way at Daytona InternationalSpeedway.
Page 14 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 15
(262) 781-3770
SEE PHOTOS OF OUR COMPLETE INVENTORY AT WWW.ARINGEQUIPMENT.COM13001 W. Silver Spring Drive
Butler, WI 53007
Jim KingMobile: (414) 530-0592
Fax: (262) 781-5053Email: [email protected]
WE ALSO HAVE AGGREGATE EQUIPMENT. PLEASE CALL DENNY KREUSER (608) 386-8480 FOR MORE INFO.
2005 Volvo L220E, Cab, A/C, Radio, AdditionalWork Lights, Return to Dig, Boom Suspension,Engine Block Heater, 7cy Bucket w/BOE,29.5R25 Tires, Recent Transmission..$95,000
2012 Volvo L90G, Heated Operator’s Seat w/LeftHand Armrest, Rear Camera w/Color LCD Monitor,Sliding Window Operator’s Door, Boom Suspension,Reversible Cooling Fan, Rear Frame Cover Plates,Front Frame Footsteps, Full Rear Fenders, CareTrackSatellite System w/3yr Subscription, 104” 3.5cyBucket w/BOE, 20.5R25 Bridgestone VJT L-3 Tires,Volvo D6H (Tier 4i) Engine................................$CALL
2012 Volvo EC250DL - Municipal trade, lowhours, 19'9" boom, 11'10" arm, 36" pads, rearview camera, UQF piping, pilot pattern controlchange, 2 pump double act. Piping ......$CALL
2012 Volvo EC340DL, MUNICIPAL TRADE, lowhours, 21'2" boom, 12'10" arm, 36" pads, rear viewcamera, UQF, pilot pattern controls, fixed lower frame,air suspension seat w/heat, 3 switch joystick, radiow/cd & mp3, rotating beacon, Caretrack w/3 year sub-scription, 2 pump double act. piping, roll switch,straight travel pedal ........................................$CALL
2009 Volvo ECR235CL, Track Pads 32”, Cwt 14,330Lbs, Heater & A/C, 9’6” Arm, Pilot Pattern ControlChange, Engine Block Heater 120V, Hammer/ShearPiping-2 Pump, Q/C Piping-SQF, Linkage w/LiftingEye, Boom 18’8”, 2 Switch ON/OFF Ham/Shear,Control Joystick w/4 Switches ....................$145,000
2004 Volvo A40D - AC, CONTRONICS,29.5-25 TIRES, TAILGATE ......$140,000
2008 Volvo DD24 - Dual 47” Drums w/UrethaneWipers, ROPS, Sliding Seat w/Dual Lever Control,Hydrostatic Drive, Work Lights, Rotating Beacon,Offset Articulation Joint, 68 Gallon Pressurized WaterSystem w/4 Nozzles Per Drum, Loading/UnloadingTraction Control, (NEW) 3 Cylinder Cummins Engine(32HP), Operating Weight 5,725 lbs ..............$17,500
2005 Volvo A35D, A/C, Radio, Air Seat, Work Lights,Electric Hood Opener, Tailgate, 26.5R25 Tires,“Service Records” ........................................$100,000
2002 Volvo L120E - Cab, A/C, Boom Susp,Hyd Q/C, Logging CWT, Full Rear Fenders, 4.1CYBkt w/BOE, 23.5R25 Tires ........................$65,000
2008 Volvo L70F - Cab, A/C, Radio w/CD,Front Work Lights, Boom Suspension, 3rd Function,Hydraulic Attachment Bracket, Reversible CoolingFan, Front Frame Footsteps, Right Hand Side Stepsw/Lockable Toolbox, Engine Block Heater, DymaxHydraulic Q/C, Dymax 4cy High Tip Bucket w/BOE,20.5R25 Goodyear RL-2+ Tires 50% ........$99,500
2010 Volvo L60F, 20.5R25 L3 RT3B GYR, BoomSuspension, Radio/CD, Oil Sampling Ports, HydraulicAttach Bracket, RH Radio Mtg Kit, Work Lights Front &Rear on Cab, RH Foot Step, ACC, Care Track, SeatISRI Air Susp., LH Armrest, 98” 2.2 CUYD H/O STEGP Bkt w/BOE 93817 ..................................$127,000
2012 Volvo BL70B, Municipal Trade, 92.5”Loader Bkt, Mech. Att. Bracket, 1.3 CY GP Bkt w/SpillGuard, EXT Dipper Arm, Pilot Controls, 4WD, A/C,Radio w/CD, MP3 Connection, Double Battery, BoomSuspension, Additional 1080lb Counterweight$95,000
2012 Volvo L70G, Cab, A/C, Radio w/CD, Heated AirSuspension Operator's Seat w/Left Hand Armrest, RearCamera w/Color LCD Monitor, Sliding Window Operator's Door,Work Lights, Boom Suspension, 3rd/4th Hydraulic Functions,Hydraulic Attachment Bracket, Reversible Cooling Fan, EngineBlock Heater, Reverse Alarm, Rear Frame Cover Plates, FrontFrame Footsteps, Logging Counterweight, CareTrack SatelliteSystem w/3yr Subscription, 100" 3.1cy Bucket w/BOE, 20.5R25Michelin XHA2 L-3 Tires, Volvo D6H (Tier 4i) Engine....$CALL
2001 Volvo L70D, Cab, A/C, Radio, WorkLights, Boom Susp, 3rd Function, RotatingBeacon, Hydraulic Attachment Bracket, 2.5cyBucket w/BOE, 20.5R25 Tires ............$63,500
2011 Volvo DD70HF, Backup Alarm, OperatingWeight 14,895 Lbs, 205 Gallon Water Tank Capacity,Vibration Frequency: 4000 VPM, VibrationCentrifugal Force: 7,820-21,080 Lbs, 57” Drum Width....................................................................$121,000
2005 Volvo L70E - Cab, A/C, Contronics, HydAttachment Bracket, 20.5R25 Tires, 2.5 CY Bucketw/BOE......................................................$110,000
Page 16 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
States Explore Ways to Fund ProjectsBy Leonard ToenjesSPECIAL TO CEG
Faced with insufficient revenues andincreased transportation infrastructureneeds, a number of states are exploringnew ways to fund highway and bridgeimprovements.
Arkansas• On March 21, House Bill 1418
failed in a vote by the House PublicTransportation Committee 10-9, onevote short of advancing to the Housefloor.• House Bill 1418, sponsored by
Rep. Jonathan Barnett (R-SiloamSprings), would have diverted sales taxrevenue generated by the sale of newand used cars, auto parts and services tothe state Highway and TransportationDepartment. The revenue shift wouldhave occurred in increments over a 10-year period and would have eventuallyamounted to $450 million annually forthe highway department, said Barnettin March.• In November 2012, voters
approved a half-cent sales tax increaseto cover a $1.3 billion bond issue forroads and bridges. The sales taxincrease took effect on July 1.
Indiana• Rep. Tim Brown (R-
Crawfordsville) proposed a gas taxincrease of two cents per gallon, from18 cents to 20 cents, with the addition-al revenue allocated for bridge repairs.An estimated $2.7 million would go tothe Indiana Department ofTransportation and the remaining $2.7million would be awarded to local gov-ernments based on need determined byINDOT, according to the LegislativeServices Agency.• The state budget passed by the leg-
islature on April 27 ends funding forthe Indiana State Police and the Bureauof Motor Vehicles from the motor vehi-cle highway account, beginning July 1,2013. This frees up $140 million annu-ally in new road funding that will beshared by INDOT and local govern-ments (53 percent to INDOT and 47percent to locals). The budget alsodirects one percent of overall state salestax collected in the state to the motorvehicle highway account beginningJuly 1, 2013. This will result in about$75 million per year in new road fund-ing that will be shared by INDOT andlocal governments (53 percent toINDOT and 47 percent to locals).• Senate Bill 479 will go into effect
July 1, 2014, and will repeal the 7 per-cent sales tax on gasoline and replace itwith a gasoline-use tax. The use tax
will equal the average retail price pergallon multiplied by 0.07.
Iowa• Governor Terry Branstad has indi-
cated he would be open to a fuel taxincrease if it can be offset by overall taxreductions.• The 10 cents per gallon gas tax
increase proposed by various trans-portation groups lost three crucial GOPsupporters, likely killing the bill. It pro-posed increasing the gas tax each yearby three cents, three cents and then fourcents. Each cent increase was expectedto bring in an additional $22 million.
Kentucky• Kentucky’s gas tax increased by
2.4 cents to 32.3 cents per gallon onJuly 1. Kentucky automatically updatesthe gas tax based on wholesale pricesof gasoline. Theincrease will generate$900 million over thenext fiscal year, with$72 million for theRoad Fund.
Michigan• Gov. Rick Snyder
is calling for a newroad funding modelthat would essentiallydouble taxes on gaso-line and diesel fuelwhile increasing regis-tration fees for passen-ger vehicles. The planwould raise gasolineand diesel taxes byabout 33 cents per gal-lon through a wholesale tax. Ifapproved by the legislature, the planwould also hike annual registration feesby 60 percent for passenger vehiclesand 25 percent for large trucks.• Additionally, Snyder is recom-
mending a local option allowingMichigan counties a chance to raiseadditional revenue for roads they main-tain. Subject to voter approval, countiescould implement a registration tax ofup to 0.18 percent of a vehicle’s listprice, generating roughly $280 millionfor local roads.
Mississippi• In 2013, House Transportation
Committee Chairman Robert Johnsonapproved a fuel tax increase in his com-mittee. The legislation was doublereferred and quickly failed in the HouseWays and Means Committee. In theSenate, there was legislation that wouldtake payouts from the state’s casinoindustry to provide for infrastructureneeds. The legislation was never dis-
cussed and subsequently failed.• A new law took effect in 2012
removing requirements that made italmost impossible to build toll roads inthe state.• The state revised its design build
requirements to allow MDOT to offerone design build job a year for $10 mil-lion or more. Prior to this, MDOTcould only offer two projects per yearunder $10 million and one project peryear over $50 million.
Missouri• On March 13, Missouri senators
endorsed a proposed penny sales taxincrease that could raise nearly $8 bil-lion over a decade for transportationprojects. The increase would requirevoter approval and, if passed, would beresubmitted to the ballot after 10 yearsso Missourians could decide whether to
continue it. Thisbill was filibusteredand died in theSenate on the lastday of session.
Ohio• Gov. John
Kasich signed onApril 1 a two-year,$7.6 billion trans-portation and publicsafety budget bill. Itwill supply about$4 billion in stateand federal funds— mostly gas taxrevenue — for roadand bridge con-tracts. The bill also
allows the state, for the first time, to usetoll revenue from the Ohio Turnpike forprojects beyond the 241-mi. (388 km)toll road’s borders.• In 2005, a new Commercial
Activity Tax (CAT) was imposed inOhio which replaced several other tar-geted taxes. The idea was to tax allcommercial activity to broaden the taxbase. This allowed for a lower tax rateon more sales instead of the high rateon just a few products and services.The CAT also applied to motor fuel. Aconstitutional issue redirected CATfunds to the General Revenue Fund,but after an appeals process the moneyis going back to transportation. At thepresent rate, this amounts to a new rev-enue source of $140 million per yearfor highway and bridge construction inOhio, equivalent to a nearly three centincrease in the state gas tax.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Leonard Toenjes, CAE presi-dent.
Berry Tractor & Equipmentwww.berrytractor.comKSGarden City800-475-2290Kansas City913-829-4600Topeka800-864-4509Wichita800-283-4246MOSpringfield800-864-7995
Brandeis Machinery & Supply Companywww.brandeismachinery.comINEvansville812-425-4491Ft. Wayne260-489-4551Indianapolis317-872-8410KYCorbin606-528-3700Lexington859-259-3456Louisville502-491-4000Paducah270-444-8390Stanville606-478-9201
Columbus Equipmentwww.columbusequipment.comOHCadiz740-942-8871Canton330-453-4521Cincinnati513-771-3922Columbus614-443-6541Dayton937-879-3154Painesville440-352-0452Perrysburg419-872-7101Piketon740-289-3757Richfield330-659-6681Zanesville740-455-4036
Continental Equipment Corp.www.aisequip.comMIGrand Rapids616-538-2400Lansing517-321-8000New Hudson248-437-8121Northeast Detroit - Lenox586-727-7502Saginaw - Bridgeport989-777-0090Traverse City - Williamsburg231-267-5060
Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary Komatsu Diesel Particulate Filterexchanges. With Komatsu CARE you can:
• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment
It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.
To learn more about Komatsu CARE
contact your Komatsu distributor or scan
this QR code with your smart phone.
GO WITH KOMATSU... AND GET THE ONLY
TIER 4 INTERIM EQUIPMENT WITH
COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.
MIDWEST KOMATSU DISTRIBUTORS
T M
s
W
8
8
8
H
W
8
8
W
8
B M
P
2
I
F
8
A
8
O
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 17
Komatsu Traction Control System (K-TCS) automatically increases performance in soft ground conditions.
The redesigned Tier 4 Interim Articulated Trucks will boost your productivity and lower your costs. From increased payload to improved traction control, the truck experts at Komatsu once again deliver on your need for a lower cost per ton moved.
ARTICULATED TRUCKS
From Komatsu – The Truck Experts
New operator’s cab provides better visibility and ergonomics.
Efficient Tier 4 Interim engine provides up to an 8% reduction in fuel consumption.
Komatsu CARE provides complimentary Tier 4 maintenance, including KDPF exchange filters. Contact your Komatsu distributor for details.
www.komatsuamerica.com
.komatsuamerica.comwww
.komatsuamerica.com
Diesel Machinery, Inc.www.dieselmachinery.comSDAberdeen605-725-4364 • 888-762-6312Rapid City605-348-7438 • 800-658-3047Sioux Falls605-336-0411 • 800-456-4005
General Equipment & Supplieswww.genequip.comNDBismark800-279-4437Fargo800-437-2924Minot800-825-0479
Road Builders Machinery & Supply Co., Inc.www.roadbuildersmachinery.comKSKansas City913-371-3822NEGrand Island308-384-2620Lincoln402-325-0447Omaha402-331-9200
Road Machinery & SuppliesCo.www.rmsequipment.comIACedar Rapids319-363-9655 • 800-616-6615Des Moines218-741-9011 • 800-555-1455Sioux City712-252-0538 • 800-633-9104ILMilan309-787-1742 • 800-633-9114MNDuluth218-727-8671 • 800-888-9535Savage952-895-9595 • 800-888-9515Virginia218-741-9011 • 800-752-4304
Roland Machinery Co.www.rolandmachinery.comILBolingbrook630-739-7474Carterville618-985-3399Marengo815-923-4966Springfield217-789-7711INPortage219-764-8080MIEscanaba906-786-6920MOBridgeton314-291-1330Cape Girardeau573-334-5252Columbia573-814-0083Palmyra573-769-2056WIDeForest608-842-4151DePere920-532-0165Eau Claire715-874-5400Franksville262-835-2710Schofield715-355-9898
T M
H
.komatsuamerica.com/komatsu-carwww
e .komatsuamerica.com/komatsu-car
Page 18 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Tomorrow is right around the corner. For utility contractors and municipalities, we have the keys to prepare for
it. Learn about new technologies, innovations, insights and trends a�ecting the utilities industry—ranging from
electric to telecom and water/wastewater to gas.
Demo the latest equipment. Meet with the experts. Network with peers. Put the future in your hands at ICUEE,
the International Construction & Utility Equipment Exposition.
REGISTER NOW AT WWW.ICUEE.COM.
OCTOBER 1-3, 2013
LOUISVILLE, KENTUCKY
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 19
Page 20 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ConExpo 1975 — Chicago, Ill.Road Shows From Past to ‘Present’
CEG Gears Up for ConExpo 1975
Fifty years ago, in 1925, when the first formal road showwas conducted in Chicago, the crowd of approximately15,000 people was thought to be spectacular.Now, a half century later, the ConExpo, formal-ly known as the Road Show, is anticipating aChicago crowd of at least 150,000 to wanderthrough the International Amphitheatre andMcCormick Place to view practically everypiece of construction equipment that is manu-factured in the world. The first known road show was actually noth-
ing more than a trade show conducted inChicago in 1909 — at least these are the earliestavailable records of a meeting of this type. In1925, the first major show was held in Chicagoand was repeated again in 1926. In those years,crowds of 15,000 to 16,000 were considerableand the exhibit area available at that time wasless than 100,000 square feet, which by today’sstandards would only accommodate the threelargest exhibitors at this year’s ConExpo.The early 1930s precluded any shows
because of the condition of the economy, but by1936 the construction industry association feltmore confident and conducted a show inCleveland. With over 14,000 visitors in atten-dance it made the show a great success. In 1938another show was staged, using both indoor andoutdoor space, also in Cleveland. The successof that year’s show provided the impetus tostage a show in San Francisco in 1939 to tie inwith the Golden Gate Exposition.The advent of World War II prevented any
road shows until 1948, when a show was heldback in Chicago for the first time since 1926.That year’s production was staged at SoldierField in Chicago and was the first totally outdoorshow and also was the last summer time showthat the association ever attempted. Regardlessof the conditions, however, the magnitude of theshow far exceeded any previous ones. It was atthis show that there was in excess of a millionsquare feet of exhibit space available, with over75 percent of this used for equipment exhibits. Italso was the first time that all exhibitors had asmuch space as they cared to use and the city ofChicago also had enough accommodations for
all of the visitors.After the 1948 success, the association changed their
name to CIMA and scheduled the next road show forChicago in February of 1957. Once again, even though itwas nine years after the last voyage to Chicago, the showproved to be tremendously successful. The number ofexhibitors and visitors, as well as the size of equipment ondisplay, was larger than anything previously staged.However at this time it also became apparent that as theshow got bigger, the cost and money involved was getting tobe enormous. Regardless of the cost, the 1957 show was ahuge success and as a result, 1963 was scheduled for the date
of the next show.The 1963 show was even bigger as the Amphitheatre, the
largest exhibition hall in the country, was once again utilized.This show was the biggest ever and proved one thing … thatthe preparations, the costs and the time involved for such ashow meant that a long period of preparation time had to begranted to all the exhibitors. The board at that time resolvedon a six-year interval between shows. This would providethe industry, construction equipment manufacturers and theirengineering departments with an adequate amount of time todevelop and announce new equipment. It was at this timethat the theme of the show was changed to ConExpo and
1969 was scheduled for the next show. The1969 show turned more international in fla-vor as countries from all over the world wererepresented by well over 10,000 overseasvisitors to Chicago. The ConExpo ’69 regis-tered 124,000 guests and exhibitors investedan estimated $100 million, including thevalue of the equipment on display, cost ofexhibits and the preparation and stagingexpenses of the show. Of the $100 million,approximately 60 percent was the cost of allthe equipment on display.ConExpo ’75, which will be staged
February 9 through the 14, will be housed intwo buildings as the 1969 show was. TheInternational Amphitheatre will be openfrom 9 a.m. until 5 p.m. and McCormick
These ConExpo articles were published in ConstructionEquipment Guide (CEG) on Feb. 5, 1975. These and otherConExpo articles to follow will be part of a continuing seriesthat take a look back at ConExpos past through the report-ing of CEG. We hope you enjoy these retros as much as wedid searching for them deep in our archives.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 21
Place will be open from 10 a.m. until 6 p.m. As toexhibitors, it could very briefly and correctly be statedthat everyone will be there. As far as the major exhibitorsare concerned, the dominating space of ConExpo ’75will be taken by JI Case, Caterpillar Tractor Co., ClarkEquipment Co., John Deere, Fiat-Allis, InternationalHarvester, Challenge Cook, Poclain, Terex, Massey-Ferguson, and Wabco, to mention a few. The exhibitorswill number in excess of 200, to give you a good idea ofthe scope of this year’s ConExpo.In addition to equipment, you can also expect to see an
extravaganza that will rival some Broadway productions.The entertainment will range from movies to miniaturemodels of equipment working from computers and alsobeing worked by electronics from nearby remote units. Alaser manufacturer will give free training in leveling theirlaser units, the manufacturer of a large rear dump willallow you to lounge in the bed of the truck and listen tosome narrators discuss the features of the vehicle.Various entertainers will be utilized including an ESPmental telepathy act, magicians will be on hand, as wellas famous entertainers, athletes, and others who will allcontribute to the construction industry on parade.
(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-tionequipmentguide.com.) CEG
ConExpo 1975 — Chicago, Ill.
Coming next issue: ConExpo ’75 Showcases the Latest,Greatest in Equipment.
Evil Knievel’s ill-fated rocket hung from a crane inMcCormick Place.
ConExpo ’75 Attracts Visitors FromAcross the Globe
(Editor’s note: This article waspublished in CEG Feb. 19, 1975.)ConExpo, the show everyone
involved in the construction equip-ment industry has been waiting for,opened this past week in Chicago.Held every six years by CIMA,ConExpo is the world’s largest pri-vately sponsored indoor trade show.The doors opened as Mayor
Richard Daley cut the ribbon and thecrowd poured in. And a crowd it wasas 75,000 braved sub-zero tempera-tures on opening day to see and mar-vel at the latest developments inconstruction equipment. It was thelargest opening day crowd in the 50-year history of ConExpo and it did-n’t stop there. By Monday night,only the second day of the event, thecrowd had exceeded the most opti-mistic predictions of 125,000 for theentire week. The crowd was as var-ied as it was large, ranging from themid-western excavator in his work-ing clothes to some dressed in cow-boy hats and boots, while otherswere in their Wall Street businesssuits; it seemed that all types of peo-ple came to see the exhibits. Over15,000 people came from overseasrepresenting about 80 countries.England, Europe, Japan, Australia,the Middle East and even somecommunist countries were amongthe many represented.There was plenty to see — 230
exhibitors displayed the latest inconstruction equipment, methodsand accessories, for every segmentof the construction industry. Thousands of pieces of equip-ment ranging in weight from many pounds to many hun-dreds of tons, were on exhibit in the two halls, McCormickPlace and the International Amphitheatre, that offered overtwo million feet of space. The total value of the equipmenton display was in excess of $150 million.The display was awesome. One of the attractions was a
huge rubber-tire loader with a 24 cu. yd. bucket. It was sobig it had to be displayed out of doors — a tall man couldeasily walk under it. Some manufacturers such as Fiat-Allis,John Deere and Massey Ferguson entered the heavy crawlermarket with many new models. The big scoop bucket wasfeatured on several of the many excavators displayed.Articulated graders, huge rubber-tire loaders, a large elec-tronic wheel dozer, all types of cranes and much foreign
made equipment were just some of the fascinating exhibits.The exhibitors themselves put on a first-class show. In
addition to the dazzling array of equipment there were otherattractions to pep up the weary eye. Shows, movies, come-dy sketches, and stars all had a part in making this a greatevent. Football players, coaches and golfers were on hand tohelp promote. Jack Nicklaus, George Blanda, Ken Stabler,Roger Staubach and Don Shula were all there. EvilKnievel’s ill-fated rocket hung from a crane in McCormickPlace.The show had to be seen to be experienced and its suc-
cess encourages an optimistic outlook for the future.(This story also can be found on Construction
Equipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG
Page 22 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
3478 5th Ave. S. • Fort Dodge, IA 50501 • (515) 574-2302
4734 Sergeant Rd. • Waterloo, IA 50701 • (319) 234-8710
106 8th St. • Sergeant Bluff, IA 51054 • (712) 943-4470
Mid Country Machinery(800) 206-5936
www.midcountrymachinery.com
2013 Kobelco ED160, EROPS, Blade, New..................$170,000
2012 Kobelco SK350, EROPS, Std Arm, 3 units ........$240,000
2012 Kobelco SK210, EROPS, Aux Hyd, 5 units ........$168,500
2012 Kobelco ED150, EROPS, Aux Hyd, New ............$155,000
2012 Kobelco SK140, EROPS, Heat, Aux Hyd ............$126,500
2012 Kobelco SK170, EROPS, Heat, A/C ....................$145,000
2012 Sany SY215, EROPS, Aux Hyd, 32 Hrs ..............$122,500
2012 Sany SY135C, EROPS, Pattern Changer ..............$89,500
2011 Kobelco SK295, EROPS, Std Arm, 732 Hrs........$179,000
2008 Kobelco SK350, EROPS, Thumb, Heat, 4330 Hrs..............
....................................................................................$123,500
2008 Kobelco SK260, EROPS, A/C, Heat, 2542 Hrs....$108,500
2008 Kobelco SK260LR, EROPS, Long Reach ............$119,000
2007 Kobelco SK350, EROPS, A/C, Heat, 3656 Hrs....$129,500
2007 Kobelco SK210, EROPS, Heat, A/C, 3294 Hrs......$87,500
2007 Kobelco SK135, EROPS, A/C, Heat, 2394 Hrs......$63,500
2006 Kobelco SK330, EROPS, Long Reach, 3925 Hrs$139,500
2006 Kobelco SK160, EROPS, Aux Hyd, Thumb ..........$73,000
2006 Komatsu PC200, EROPS, A/C, Heat, 3745 Hrs ....$96,500
2004 Kobelco SK210, EROPS, A/C, Heat ......................$65,000
2003 Kobelco SK160, EROPS, Thumb, 5306 Hrs..........$56,500
2001 Kobelco SK210, EROPS, Heat, 5460 Hrs..............$55,000
1998 Komatsu PC220, EROPS, Long Reach, 5957 Hrs $55,000
2012 Deere 310SK, EROPS, 4WD, Heat, A/C 8units ........$CALL
2010 Cat 450E, EROPS, 4WD, Aux Hyd, 206 Hrs..........$89,000
2008 Cat 420E, EROPS, 4WD, X-Hoe, 359 Hrs ............$70,000
2008 JCB 4CX, EROPS, 4WD, X-Hoe, 953 Hrs..............$81,000
2008 JCB 3CX, EROPS, 4WD, Aux Hyd, 362 Hrs ..........$63,000
2006 Cat 420E, EROPS, 4WD, X-Hoe, 3163 Hrs ..........$57,500
2005 Deere 310G, EROPS, Heat, A/C, 1978 Hrs ..........$35,000
1996 Cat 416B, EROPS, 4WD, Std Hoe, Heat................$19,000
1996 Cat 416B, EROPS, 4WD, Std Hoe, 6617 Hrs ........$19,000
1990 Ford 655C, EROPS, X-Hoe, Aux Hyd, 5922 Hrs ..$15,000
1989 Deere 410C, EROPS, Std Hoe, Heat ....................$22,000
1987 New Holland 555B, EROPS, Std Hoe, 8028 Hrs ..$15,000
1982 Deere 310AD, EROPS, Std Hoe, 3922 Hrs ............$9,500
2012 Kawasaki 95Z-7, EROPS, A/C,Ride Control........$395,000
2012 Kawasaki 65ZV-2, EROPS, QC, Ride Control ....$155,500
2012 Kawasaki 45ZV-2, EROPS, A/C, QC, 4WD............$71,500
2012 Kawasaki 70TMC-2, EROPS,A/C, Heat ..............$162,500
2012 Kawasaki 90Z-7, EROPS, QC, A/C, Heat ............$295,000
2011 Case 621E, EROPS, QC, A/C, Heat, 18 Hrs ........$139,500
2010 Kawasaki 80ZV-2, Ride Control, 601 Hrs, A/C ..$155,000
2008 Deere 624J, EROPS, QC, 3rd Valve, 5516 Hrs ..$145,000
2007 NH W190B, EROPS, Ride Control, 2667 Hrs ......$109,500
2006 Kawasaki 95ZV, EROPS, A/C, Heat, 5613 Hrs ....$169,500
2003 Komatsu WA180-MC3, EROPS, A/C, Heat............$58,500
1999 Cat 950G, EROPS, Heat, A/C ................................$75,000
1998 Deere 644H, EROPS, Heat, A/C ............................$70,000
1986 Cat IT18, EROPS, QC, A/C, Heat, 9322 Hrs ..........$25,000
1983 Case W20B, EROPS, 4in1 Bucket, 7662 Hrs ........$16,000
2012 Kobelco SK55SR, EROPS, 4 way blade, 4 units ..$64,000
2012 Kobelco SK55SR, OROPS, 4 way blade ..................$CALL
2012 Kobelco SK35SR-5, EROPS, Heat, Aux Hyd............$CALL
2012 Kobelco SK80CS-2, EROPS, Aux Hyd, 310 Hrs....$85,500
2012 Sany SY75, EROPS, Aux Hyd, 2 units ..................$67,500
2009 Kobelco SK35SR-5, EROPS, Aux Hyd, 926 Hrs ..$29,000
2008 Kobelco SK80CS-1, EROPS, Blade, 829 Hrs ........$53,000
2012 Deere 700K LGP, EROPS, A/C, Heat, Topcon ....$179,000
2011 Deere 650J XLT, OROPS, Sweeps, 6 way ............$75,000
2008 Cat D6T LGP, EROPS, A/C, Straight Blade ..........$199,500
2008 Cat D6T XL, EROPS, A/C, SU Blade....................$210,000
2008 Cat D6T XL, EROPS, Sweeps, SU Blade ............$199,000
2008 Cat D6T XW, EROPS, A/C, Heat, SU Blade..........$242,500
2008 Cat D6N LGP, EROPS, A/C, 6way, 3620 Hrs ......$149,000
2008 Cat D6N LGP, EROPS, A/C, Heat, 3109 Hrs ........$149,000
2008 Cat D6T XL, EROPS, A/C, Heat, 4367 Hrs ..........$210,000
2007 Cat D6T XW, EROPS, SU Blade, 3985 Hrs..........$199,000
2007 Cat D6T XL, EROPS, A/C, Heat, 4279Z Hrs ........$189,000
2007 Cat D6K LGP, EROPS, Heat, A/C, Sweeps ..........$124,500
2006 Komatsu D61EX-15, EROPS, 6way, 4931 Hrs ....$105,000
2006 Cat D6N LGP, EROPS, A/C, Heat, 3644 Hrs ........$112,000
2004 Cat D6R XW, EROPS, A/C, Heat, 3829 Hrs ........$170,000
2003 Cat D6R XW, EROPS, 6way, Weighted Hitch ........$98,000
2001 Cat D6R XL, EROPS, SU Blade, Long Track ............$CALL
1987 Cat D6H, OROPS, SU Blade, 24” Shoes ..............$49,000
1998 Cat D6M XL, EROPS, A/C, Heat ............................$63,000
1975 Cat D7G, Open Sweeps, New Undercarriage ........$55,000
1974 Dresser TD15C, OROPS, SU Blade ......................$16,500
2007 Dynapac CA150PD, Single Drum, 129 Hrs ..........$55,000
2006 Bomag BW177PDH, 66” Padfoot, 325 Hrs ..........$44,000
2006 Bomag BW177PDH-3, 66” Padfoot, 100 Hrs ......$46,500
2005 Bomag BW177PDH-3, 66” Padfoot, 766 Hrs ......$39,000
2005 I-R SD100D-TF, OROPS, Single Drum, 659 Hrs ..$57,000
2005 Bomag BW177PDH-3, 66” Padfoot, 667 Hrs ......$41,000
2005 I-R SD70D, OROPS, 66” Smooth drum, 1300 Hrs$43,000
2004 I-R SD70D, OROPS, 66” Smooth drum, 2396 Hrs$35,000
2004 HyPac C832C, OROPS, 68” Padfoot, 1207 Hrs ....$33,500
1989 Dynapac CA15PDB, OROPS, Blade, 4144 Hrs......$18,500
EXCAVATORS
LOADER / BACKHOES
WHEEL LOADERS
MINI EXCAVATORS
CRAWLER TRACTORS
COMPACTORS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 23
Page 24 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Rayco Dons New Modern Look
In celebration of its 35thyear in business, Raycohas launched a campaignto better communicate itscompany values. It also isshedding the yellow andred logos and paintscheme in favor of a new,more modern look. Thosevisual cues will be carriedthrough from themachines, down to market-ing literature, print adver-tisements and Web site.
PRE-OWNED, JOB READY EQUIPMENT NOW AVAILABLE! Cincinnati • Mt. Orab • Columbus • Lexington • Louisville
Call Brad Kent at 513-266-7761 or on our USED EQUIPMENT HOTLINE: 888.BOBCATS
Parts • Sales • Service • Rental • Training
To See More Machines, Please visit us online at www.bobcat-ent.com
2006 S185 Bobcat Loader, 1110 Hrs, Open ROPS, CN 86985..........................................................................................$22,000
2011 S185 Bobcat Loader, 780 Hrs, Joysticks, Open ROPS,(5 Available) CN 80149 ..................................................$24,000
2005 S220 Bobcat Loader, 2040 Hrs, Cab, Heat & Air, CN 85831..........................................................................$23,000
2007 T300 Bobcat Track Loader, 1815 Hrs, Gold Pkg,Joystick Controls, CN 86799 ........................................$36,000
2011 T750 Bobcat Track Loader, 1350 Hrs, Gold Package, CN83482 ................................................................................$55,000
2012 S650 Bobcat Loader, 780 Hrs, Cab Heat & Air, CN 84093..........................................................................$34,000
2010 S630 Bobcat Loader, 1910 Hrs, Open ROPS, CN 84437..........................................................................................$25,000
2007 341 Bobcat Excavator, 1240 Hrs, Open ROPS, CN86986 ................................................................................$34,500
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 25
www.KOBELCO-USA.com
Page 26 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 27
Scharber & SonsRogers, MN
763-428-4107
Isanti County EquipmentIsanti, MN
Jesse Kraft763-444-8873
www.mnequipmentsolutions.com
RDO Equipment Co.Burnsville, MN
Matt Dull952-890-8880
0% for 48 Months*Expires 9/30/13
*Offer ends 9/30/13. Some restrictions apply; other special rates and terms may be available, so see your dealer for detailsand other financing options. Subject toapproved credit with John Deere Financial.
Page 28 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
SDLG Wheel Loaders Bring Strength, Stability, SimplicitySDLG North America has introduced the
LG938L and LG959 wheel loaders, with 2.4and 4.0 cu. yds. (1.8 and 3.1 cu m) bucketcapacity respectively, for secondary and sup-porting applications.The LG938L and LG959 are the first
models in the SDLG construction equipmentproduct offering to be made available inNorth America. The easy-to-operate wheelloaders are particularly well-suited to mate-rial production facilities, site preparation andmaintenance yards demanding cost-effec-tive, reliable performance from mid-sizedwheel loaders in support of their primaryoperations, according to the manufacturer.
LG938LWith an operating weight of 23,150 lb.
(10,500 kg), the LG938L wheel loader offersthe strength to fulfill multiple load and carryapplications. With a standard bucket capaci-ty of 2.4 cu. yds. (1.8 cu m), the LG938L israted to load and carry up to 6,000 lb. (2,720kg) of material. The wheel loader has a maximum break-
out force of 16,410 lbf (73 kN) with a statictipping load at full turn of 14,860 lb. (6,740kg). When equipped with the optional longboom, the maximum breakout force is15,290 lbf (68 kN) with a rated full-turn tip-
ping load of 13,500 lb. (6,120 kg).The LG938L is powered by a Tier IVi-
certified Deutz TCD 6.1 L6 turbocharged,water-cooled engine. Cooled gas recircula-tion technology in the engine includes adiesel particulate filter (DPF) with automat-ic, active regeneration, a technology inwhich the DPF temporarily holds the partic-ulate matter and then incinerates it, furtherreducing emissions. The process maximizesuptime, occurring without any loss of per-formance of the wheel loader or efficiency ofthe engine. The engine generates 160 grosshp (120 kW) and 142 net hp (106 kW).Maintenance on the LG938L is made sim-
ple with easy-to-replace dry disc brakes and17.5-in. (44 cm) bias ply tires. To meet oper-ator preference or machine application, radi-al tires are available as an option.The LG938L includes a 12-month, 1,500-
hour warranty.
LG959The LG959 wheel loader, with an operat-
ing weight of 38,250 lb. (17,350 kg), has astandard bucket capacity of 4.0 cu. yds. (3.1cu m) rated to load and carry 10,000 lb.(4,535 kg) of material. The LG959 generates a maximum break-
out force of 34,170 lbf (152 kN) with a stat-
ic tipping load at full turn of 22,490 lb.(10,200 kg). When equipped with theoptional long boom, the wheel loader’s max-imum breakout force is 32,820 lbf (146 kN)and rated full-turn tipping load is 20,240 lb.(9,180 kg).The LG959 is equipped with a Deutz D7E
LAE3 turbocharged, water-cooled enginemeeting Tier III emission requirements. Theengine generates maximumoutput of 224 gross hp (167kW) and 194 net hp (145kW).Standard-equipped with
23.5-in. (60 cm) bias plytires, the LG959 wheelloader features industry-leading wet disc brakes.Radial tires are optional.The LG959 includes a 12-
month, 1,500-hour warranty.
ReliabilitySDLG wheel loaders include standard
features that make them versatile to simplifywork, including an ISO-interface hydraulicquick coupler for easy attachment change-outs from inside the cab, and full-poweredthird function hydraulics. The load-sensing,fully hydraulic articulated steering; industry-
leading transmission; low-pressure opencenter hydraulics; and a reversible enginecooling fan add to the wheel loaders’ reliableperformance.ROPS/FOPS cabs on SDLG wheel load-
ers feature floor-to-ceiling glass, joystickcontrols, air conditioning, radio with USBinterface, and control panel functions in themost modern of operator environments.
SDLG wheel loaders are being madeavailable through an introduction phase withselected industry-leading dealers before fur-ther expansion in North America.For more information, visit www.sdl-
gna.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Kobelco USA Holds Successful Dealer Meeting in TexasKobelco Construction Machinery
USA recently held a dealer meeting atthe Woodland’s Resort and ConferenceCenter in The Woodlands, Texas. Themeeting started on July 8 and ended themorning of July 10. Forty-threeKobelco dealers were represented at theevent by nearly 100 attendees.“Given the rather recent relaunch of
our brand, we are extremely pleasedwith the turnout at our first official deal-er gathering,” said Ron Hargrave, vicepresident of marketing and sales ofKobelco Construction Machinery USA.Following an opening night reception
and networking event the evening ofJuly 8, was the company’s official rib-bon cutting ceremony to its new U.S.headquarters in Houston the next morn-ing. After the ribbon cutting, dealers weregiven tours of Kobelco’s new offices andparts distribution warehouse. The balance ofthe day was educational, with dealers learn-ing more about the company’s long termgoals, its global approach and its approach asit relates specifically to gaining market sharein North America. Additional time was ded-icated to discussions surrounding productdevelopment, marketing, customer service,warranty, order management and parts.
Pete Morita, president and CEO ofKobelco Construction Machinery USA,specifically addressed how Kobelco willwork with dealers in each of their designatedterritories. “Our goal is to work with and listen to
each and every Kobelco dealer to helpimprove Kobelco excavators and our inter-nal processes so that we can provide theequipment your customers want and need.We are flexible and nimble and we want to
react quickly to the needs of your local mar-ketplace. We will work with you one on oneto develop win-win situations so that we canjointly grow Kobelco’s market share andbecome a market leader.”Though packed with information, the
meeting also provided plenty of time fornetworking. The night of July 9 was allabout having a little fun. Kobelco kickedoff a group dinner with a traditional sakebarrel ceremony. Select dealers were asked
to participate by beating three woodenbarrels open with a wooden mallet.Once open, the barrels signified a freshstart for Kobelco in North America.Dealers toasted Kobelco’s new begin-ning with the sake inside the barrels.Following dinner, dealers participatedin a casino night. The meetingwrapped up with a golf outing on themorning of July 10. “The event had such positive energy
from start to finish. That energystemmed from Kobelco executiveswho flew in from overseas, to ourKobelco USA employees to each andevery dealer who willingly participatedin the meeting. This is such a wonder-ful and exciting time for the company.Dealers are genuinely thrilled to have
the true Kobelco back in the United Statesand Canada. Our passion for innovation andsingle line focus is something that has beenmissed by the industry for a very long time,”said George Lumpkins, product marketingmanager.For more information, call 281-888-8430
or visit www.Kobelco-USA.com. (This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Dealers participated in a traditional sake barrel ceremony.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 29
2001 Komatsu PC228USLC-3: #80703, Cab/AC,31.5” Tracks, 9’7” Arm, 5100 Hrs ........$89,500
2008 Komatsu PC270LC-8: #91822, Cab/AC,31.5” Tracks, 11’6” Arm, JRB QC, KOMTRAX,9800 Hrs ..............................................$99,500
1995 Komatsu PC250LC-6: #91777, Aux Hyd,31.5” Tracks, 10,000 Hrs ......................$49,500
1987 Komatsu PC200LC-3: #91840, Cab, GPBkt, 9400 Hrs ........................................$29,500
2011 Komatsu PC200LC-8: #81903, Cab/AC,9’7” Arm, KOMTRAX, Rear Camera, Only 200Hrs ......................................................$169,500
2007 Komatsu PC78MR-6: #81694, Cab/AC,Rubber Tracks, Blade, Aux Hyd, QC, 3700 Hrs ................................................................$54,500
2007 Komatsu PC138USLC-8: #81618, Cab/AC,8’ Arm, 24” Tracks, Blade, 4400 Hrs ....$83,500
2006 Komatsu PC300LC-7EO: #81832, Cab/AC,10’ Arm, 33.5” Tracks, KOMTRAX, 7150 Hrs..................................................................$119,500
2004 Komatsu PC160LC-7: #81899, Cab/AC,Aux Hyd, 5100 Hrs................................$84,500
2001 Komatsu PC200LC-6LF: #80381, Cab/AC, 60’Long Front, 60” Ditching Bkt, 5350 Hrs $139,500
2005 Komatsu PC270LC-7: #81943, Cab/AC,33.5” Tracks, Mech Thumb, 6350 Hrs $104,500
2005 Komatsu PC400LC-7: #91871, Cab/AC,35.5” Tracks, 13’ Arm, JRB QC, Aux Hyd,13,300 Hrs ..........................................$118,500
Call Doug / Sam:(866) 485-7180
Page 30 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
REGISTER NOW TO SEE WHAT’S NEWREGISTER NOW TO SEE WHAT’S NEW
MARCH 4-8, 2014 | LAS VEGAS CONVENTION CENTER | LAS VEGAS, USA Co-located with ®2014
Get the ultimate up-close look at the future of lifting.Registration is now open for the show that offers an immense unveiling of all the newest equipment, technology and product breakthroughs in lifting. Bringing you the latest in everything from capacity and reach to transportability, it’s the one show that raises the bar for working smarter.
Register now at www.conexpoconagg.com to save over 30%!
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 31
TOUGH WORLD. TOUGH EQUIPMENT
Wheel Loaders, and Rollers.The product offering includes quality manufactured Liugong machinery such as Dressta brand Dozers, Liugong Excavators,
Liugong brand of construction machinery to our equipment products.Company Wrench Ltd. is proud to announce its partnership with Liugong Construction Machinery to add the comprehensive
Wheel Loaders, and Rollers.The product offering includes quality manufactured Liugong machinery such as Dressta brand Dozers, Liugong Excavators,
Liugong brand of construction machinery to our equipment products.Company Wrench Ltd. is proud to announce its partnership with Liugong Construction Machinery to add the comprehensive
The product offering includes quality manufactured Liugong machinery such as Dressta brand Dozers, Liugong Excavators,
Liugong brand of construction machinery to our equipment products.Company Wrench Ltd. is proud to announce its partnership with Liugong Construction Machinery to add the comprehensive
The product offering includes quality manufactured Liugong machinery such as Dressta brand Dozers, Liugong Excavators,
Liugong brand of construction machinery to our equipment products.Company Wrench Ltd. is proud to announce its partnership with Liugong Construction Machinery to add the comprehensive
The product offering includes quality manufactured Liugong machinery such as Dressta brand Dozers, Liugong Excavators,
Company Wrench Ltd. is proud to announce its partnership with Liugong Construction Machinery to add the comprehensive
The product offering includes quality manufactured Liugong machinery such as Dressta brand Dozers, Liugong Excavators,
Company Wrench Ltd. is proud to announce its partnership with Liugong Construction Machinery to add the comprehensive
Indiana,Pennsylvania, New Jersey, West Virginia, Kentucky, Tennessee, Georgia, Florida, Oregon and Washington.Company Wrench will stock the product line for rental, sales and service and will cover all of Ohio, aswell as major markets in
Indiana,Pennsylvania, New Jersey, West Virginia, Kentucky, Tennessee, Georgia, Florida, Oregon and Washington.Company Wrench will stock the product line for rental, sales and service and will cover all of Ohio, aswell as major markets in
Indiana,Pennsylvania, New Jersey, West Virginia, Kentucky, Tennessee, Georgia, Florida, Oregon and Washington.Company Wrench will stock the product line for rental, sales and service and will cover all of Ohio, aswell as major markets in
Indiana,Pennsylvania, New Jersey, West Virginia, Kentucky, Tennessee, Georgia, Florida, Oregon and Washington.Company Wrench will stock the product line for rental, sales and service and will cover all of Ohio, aswell as major markets in
Indiana,Pennsylvania, New Jersey, West Virginia, Kentucky, Tennessee, Georgia, Florida, Oregon and Washington.Company Wrench will stock the product line for rental, sales and service and will cover all of Ohio, aswell as major markets in
Indiana,Pennsylvania, New Jersey, West Virginia, Kentucky, Tennessee, Georgia, Florida, Oregon and Washington.Company Wrench will stock the product line for rental, sales and service and will cover all of Ohio, aswell as major markets in
CORPORA
T
TE OFFICECORPORAATE OFFICE
Toll Free # 866.26
OHIO
2.4181
CORPORA
OHIO
NEW JERSEY
TE OFFICECORPORAATE OFFICE
740.654.5304Phone:
Carroll, OH 43112
Scooby Ln. NW4805
OHIO
513.649.8105Phone:
Cincinatti, OH 45044
S Verity Pkwy3120
NEW JERSEY
740.654.5304
513.649.8105
OHIO
440.439.4567Phone:
Cleveland, OH 44146
Golden Oak Pkwy525
INDIANA
ANIAVVANIAPENNSYLLV
724.222.2447Phone:
Washington, PA 15301
West Beau St.400
440.439.4567
Cleveland, OH 44146
Golden Oak Pkwy
724.222.2447
Washington, PA 15301
West Beau St.
FLORIDA
SOUTH CAROLINA
FLORIDA
813.754.5800Phone:
Plant City, FL, 33563
Airport Rd.2812
SOUTH CAROLINA
856.404.9675Phone:
Williamstown, NJ 08094
S. Black Horse Pike 2636
317.375.7790Phone:
Indianapolis, IN 46239
Brookville Rd.7019
813.754.5800
TENNESSEE
931.526.6222Phone:
Cookeville, TN 38506
Southside Dr.1220
856.404.9675
Williamstown, NJ 08094
S. Black Horse Pike
TH CAROLINANOR
317.375.7790
Indianapolis, IN 46239
Brookville Rd.
931.526.6222
Cookeville, TN 38506
Southside Dr.
The Cutting Edge of Customer Service
.wwww.companywr
The Cutting Edge of Customer Service
ench.com.companywr
The Cutting Edge of Customer Service
KENTUCKY
ench.com
KENTUCKY
859.254.1107Phone:
Lexington, KY 40504
Old Frankfort Pike1554
803.642.0060Phone:
Aiken, SC 29805
Old Kimbill Trail1252
859.254.1107
Old Frankfort Pike
.ASHINGTON ST T.W
360.694.7027Phone:
Vancouver, WA 98660
NW Friut Vally Rd3909
803.642.0060
Old Kimbill Trail
1-855-KOBELCOPhone:
Wilsons Mills Rd. Ext125
360.694.7027
Vancouver, WA 98660
NW Friut Vally Rd
1-855-KOBELCO
Wilsons Mills Rd. Ext
Page 32 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
We are relentlessly focusedon helping you build a safer,
better, stronger future, and we have your back
UnitedRentals.com | 800.UR.RENTS
© 2013 United Rentals, Inc.
Aerial | Earthmoving | Trench SafetyPower & HVAC | Tool Solutions | Technology
Doing whateverit takes to help you
get the job done.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 33
Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50
Scale ....................................................................................$80
Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $80
Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale ..$80
Bantam Truck Mounted Crane, 1:50 Scale ..................$115
Bantam Truck Mounted Shovel, 1:50 Scale ....................$60
Bobcat E35 Compact Excavator, 1:25 Scale ................$50
Bobcat E55 Compact Excavator, 1:25 Scale ................$60
Bobcat 5600 Toolcat Utility Vehicle, 1:25 Scale............$55
Bobcat S185 Skid Steer Loader, 1:25 Scale..................$50
Bobcat S510 Skid Steer Loader, 1:25 Scale..................$65
Bobcat S530 Skid Steer Loader, 1:25 Scale..................$65
Bobcat S550 Skid Steer Loader, 1:25 Scale..................$65
Bobcat S570 Skid Steer Loader, 1:25 Scale..................$65
Bobcat S590 Skid Steer Loader, 1:25 Scale..................$65
Bobcat T550 Compact Track Loader, 1:25 Scale ..........$65
Bobcat T590 Compact Track Loader, 1:25 Scale ..........$65
Bobcat T770 Compact Track Loader, 1:25 Scale ..........$45
Bobcat Versahandler Tool Carrier, 1:25 Scale ..............$50
Bucyrus Erie 22B Cable Shovel, 1:50 Scale ..............$225
Bucyrus Erie 22B Cable Backhoe, 1:50 Scale ............$225
Case 330 Articulated Dump Truck, 1:50 Scale ............$35
Case 420 Series 3 Uniloader, 1:50 Scale ......................$85
Case 695 Super “R” Backhoe/Loader, 1:50 Scale ......$165
Case CX130 Excavator w/Breaker, 1:50 scale ............$135
Caterpillar AP655D Asphalt Paver, W/O Canopy, 1:50
Scale ................................................................................$80
Caterpillar D5K2 LGP Track-Type Tractor, 1:50 Scale ..$65
Caterpillar D6K Track-Type Tractor ..............................$60
Caterpillar D7E Track-Type Tractor, 1:50 Scale ............$90
Caterpillar D8T Track-Type Tractor, 1:50 Scale ..........$110
Caterpillar D10T Track-Type Tractor, 1:50 Scale ........$105
Caterpillar D11R Track-Type Tractor, 1:50 Scale ........$100
Caterpillar 140M Motor Grader, 1:50 Scale....................$85
Caterpillar M200 Cold Planer, 1:50 Scale ....................$110
Caterpillar 226B3 Skid Steer Loader, 1:32 Scale ..........$40
Caterpillar 247B3 Multi-Terrain Track Loader, 1:32 Scale ..
..........................................................................................$40
Caterpillar 336D L Excavator, 1:50 Scale ......................$95
Caterpillar 365B L Series II Excavator, 1:50 Scale........$75
Caterpillar 416C Backhoe/Loader, 1:50 Scale ..............$75
Caterpillar 374D L Excavator, 1:50 Scale ....................$150
Caterpillar 963D Track Loader, 1:50 Scale ....................$60
Caterpillar 977 Traxcavator, 1:50 Scale ........................$60
Doosan Moxy MT31 Articulated Truck ........................$100
Gehl 680 Compact Wheel Loader, 1:50 Scale ..............$45
Hamm 110 Asphalt Compactor w/ROPS, 1:50 Scale ....$70
Hamm 3307 Compact Roller, 1:34 Scale........................$45
Hamm GRW 280 Compactor w/Cabin, 1:50 Scale ........$85
Hitachi EH700 Off-Highway Truck, 1:50 Scale ..............$40
Hitachi ZX870 Excavator, 1:50 Scale ..........................$185
International 175 Crawler Loader, 4in1, 1:50 Scale ......$65
International TD-15 Dozer, 1:50 Scale............................$60
International TD-20E Dozer, 1:64 Scale ........................$24
International TD-25 Dozer, 1:50 Scale............................$75
JCB 3CX Backhoe/Loader, 1:50 Scale ..........................$85
John Deere 315 SJ Backhoe/Loader, 1:50 Scale ..........$45
John Deere 400D Articulated Truck, 1:50 Scale ..........$45
Komatsu CK25 Compact Track Loader, 1:50 Scale......$45
Komatsu D51 PX Dozer, 1:50 Scale ..............................$85
Komatsu D51 EX Dozer, 1:50 Scale ..............................$85
Komatsu D65PX-17 Dozer, 1:50 Scale ..........................$80
Komatsu D155 AX Dozer, 1:50 Scale ............................$85
Komatsu D375 A Dozer, 1:50 Scale..............................$125
Komatsu GD655 Motor Grader, 1:50 Scale....................$90
Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80
Komatsu HM250 Articulated Dump Truck, 1:50 Scale $75
Komatsu PC14R Mini-Excavator, 1:32 Scale ................$45
Komatsu PC200-8 Excavator, 1:50 Scale ....................$110
Komatsu PC350LC Excavator, 1:50 Scale ....................$80
Komatsu PC400 LC Excavator, 1:50 Scale....................$95
Komatsu SK1020 Skid Steer Loader, 1:25 Scale ..........$40
Komatsu SK1026 Skid Steer Loader, 1:25 Scale ..........$40
Komatsu WA500 Wheel Loader, 1:50 Scale ..................$80
Komatsu WA600 Wheel Loader, 1:50 Scale ..................$80
Komatsu WB146 Backhoe/Loader, 1:50 Scale..............$75
Komatsu Mack Granite MP w/Lowboy Trailer, 1:50 Scale ..
..........................................................................................$90
Liebherr PR764 Dozer, 1:50 Scale................................$150
Link-Belt 80100 RTC, 1:50 Scale ..................................$185
Link-Belt 250 X Excavator, 1:50 Scale ........................$140
Poclain 350 Front Shovel, 1:50 Scale ..........................$190
Terex AC100/4 All Terrain Crane, 1:50 Scale ..............$200
Terex TR60 Off-Highway Truck, 1:50 Scale ................$160
Vogele MT3000 Powerfeeder, 1:50 Scale ....................$140
Vogele 1900 Tracked Paver, 1:50 Scale ......................$125
Vogele Super 700 Small Paver, 1:50 Scale....................$75
Vogele Super 1803-2 Wheeled Paver, 1:50 Scale ......$135
Vogele Super 3000-2 Tracked Paver, 1:50 Scale ........$140
Vogele Vision 5200-2 Tracked Paver, 1:50 Scale ........$115
Volvo EC280 Excavator, 1:50 Scale ..............................$50
Volvo L220G Wheel Loader, 1:50 Scale ......................$120
Volvo L250G Wheel Loader, 1:50 Scale ......................$120
Volvo SD-122 Soil Compactor, 1:72 Scale ....................$25
Volvo 6870 Wheeled Paver, 1:50 Scale..........................$90
Wirtgen W210 Cold Milling Machine, 1:50 Scale ..........$80
All New in Box
CALL Toll Free
800-523-2200Ext. 197
Collections Wanted, I Buy Collections Shipping and Handling Included
Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell
Email – [email protected]
CEG Scale Models470 Maryland Drive
Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.
Volvo L250G Wheel Loader, 1:50 Scale $125Komatsu PC360LC-10 Excavator, 1:50 Scale $100Caterpillar 323D L Excavator, 1:50 Scale $90
Page 34 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ARTBA Foundation Hosts 18th AnnualYoung Executive Development Program
The 2013 YEDP fellows were:• Dario Alvarez, regional sales manager, Plastic Safety Systems Inc., Cleveland, Ohio• Matthew Arp, project manager, Wright Brothers Construction Company Inc., Charleston, Tenn.• Andrew Barash, senior project engineer, CH2M HILL, Seattle, Wash.• Christopher Benson, project manager/operations leader, CH2M HILL, Sacramento, Calif.• Christopher Berger, consultant, Parsons Brinckerhoff, Washington, D.C.• Matthew Bignell, government bid department supervisor, 3M, St. Paul, Minn.• Jay Burleson, director of membership and communications, Florida Transportation Builders Association, Tallahassee, Fla.• Julia Capuchino, design engineer, C.C. Myers Inc., Rancho Cordova, Calif.• Kenzie Cooper, aggregates sales, Lafarge North America Inc., Timonium, Md.• Chad Critcher, vice president, national market leader design build major highway, RS&H, Charlotte, N.C.• Jason Dahlvik, senior associate/project manager, H.W. Lochner, Tampa, Fla.• Charles Dewey, project manager, Parsons Brinckerhoff, Tampa , Fla.• T.J. Dixon, estimator/project manager, LoJac Enterprises, Hermitage, Tenn.• Rachael Elmore, co-owner/manager, Edge Construction, Tremont, Miss.• Jason Estes, project manager, Granite Construction Company, Broomfield, Colo.• Jihane Fazio, project manager, AECOM, Philadelphia, Pa.• Joseph Fazio, division leader/project manager, TranSystems, Philadelphia, Pa.• Miguel Fernandez, plant manager, CEMEX USA, Miami, Fla.• James Gregg, project manager, HNTB Corporation, Baton Rouge, La.• Mike Hahn, project manager, Lunda Construction Company, Black River Falls, Wis.• Robert Harms, chief executive officer, George Harms Construction Co. Inc., Farmingdale, N.J.• Heather Heindel, associate, Kilpatrick Townsend, Atlanta, Ga.• Michael Hutchinson, senior project manager, HNTB Corporation, Austin, Texas• Conner Jensch, project engineer, Hoffman Construction Company, Black River Falls, Wis.• David Jeong, associate professor, Iowa State University, Ames, Iowa• Bradford Johnson, project manager, CDM Smith, Lexington, Ky.• David Johnson, project sponsor, Kiewit Infrastructure South Co., Peachtree City, Ga.• Jason Keen, assistant controller, Lehman-Roberts Company, Memphis, Tenn.• Jason Kerby, D&C manager, NTE Mobility Partners, North Richland Hills, Texas• Meridith Krebs, lead environmental planner, Parsons Brinckerhoff, Nashville, Tenn.• Caleb Linn, project manager, PCL Civil Constructors, Chesapeake, Va.• Megan K. MacLaughlin-Barck, president/ owner, Larson Construction Co. Inc., Chippewa Falls, Wis.• James Maloney, vice president, Johnson, Mirmiran & Thompson Inc., Philadelphia, Pa.• Lucas Olson, central regional streetcar director, HDR Engineering, Minneapolis, Minn.• Gina Parker, program marketing specialist, 3M, St. Paul, Minn.• John Payne, area construction manager, Rogers Group Inc., Knoxville, Tenn.• Shane Petersen, senior vice president and district manager, Kiewit Infrastructure West Co., Vancouver, Wash.• Robert Plumb, west coast regional manager, ORAFOL Reflective Solutions Americas, Avon, Conn.• Michael Prince, project manager, Wright Brothers Construction Company Inc., Charleston, Tenn.• Andrew Rogers, estimator/project manager, Granite Construction Company, Tucson, Ariz.• Edward Rottmann, rental operations coordinator, Stowers Machinery Corporation, Knoxville, Tenn.• Brett Shankles, project manager, Bryant Contracting Inc., Toano, Va.• Paul Silberman, director of transportation planning, Sabra, Wang & Associates Inc., Columbia, Md.• Tony Skulick, sales manager, CEMEX USA, El Dorado Hills, Calif.• Christopher Sweat, construction manager, Smith Seckman Reid Inc., Elizabethon, Tenn.• Cecily Way, lead transportation planner, Parsons Brinckerhoff, San Diego, Calif.• Justin Wilson, executive vice president, Wilson & Associates P.C., Franklin, Tenn.• Carol Wynperle, supervising engineer, Parsons Brinckerhoff, New York, N.Y.For more information, visit www.artba.org.(This story also can be found on Construction Equipment Guide’s Web site at www.constructionequipmentguide.com.)
Forty-eight transportation design and construction indus-try “rising stars” came to the Nation’s Capital June 3 to 6 toparticipate in the American Road and TransportationBuilders (ARTBA) Foundation’s 18th annual YoungExecutive Development Program (YEDP). The intensive,four-day program focuses on the impact the federal govern-ment has on the industry and the role ARTBA plays in shap-ing national transportation policy. The 2013 class marks thelargest ever in ARTBA history. YEDP graduates represented more than 20 states and
work in all sectors of the transportation construction indus-try. The YEDP program included sessions on the legislative
and regulatory processes, infrastructure financing, econom-ics, environmental issues, grassroots training and industryinnovation. Participants heard from industry leaders such asKathy Ruffalo, government affairs consultant and formercommissioner of the National Surface TransportationInfrastructure Financing Commission, on future challengesto the nation’s infrastructure, and Doug Black, president andCOO, Oldcastle Inc., on leadership and business acumen.The program was held in conjunction with the association’sannual Federal Issues Program and TransportationConstruction Coalition, enabling YEDP fellows to partici-pate in meetings with their congressional representatives anddiscuss funding challenges facing the Highway Trust Fund.
Kobelco Construction Machinery USA appointed DennisHines as a technical parts assistant in support of the brand’srelaunch in North America. Hines brings with him toKobelco more than 20 years of industry specific parts andtechnical service experience.Although this position is new to Hines, the Kobelco brand
is not. He served as a parts technician for Kobelco from 1988to 2003. Returning to the company in a similar positionensures he’ll be able to pick up where he left off. “Having the opportunity to rejoin Kobelco’s parts and
service team is a great honor,” said Hines. “As a formeremployee, I am looking forward to once again being part ofan organization that is driven by passion; Passion for its peo-ple, its products, its service and its customers. Parts and serv-ice is so critical in this industry. Kobelco understands that.It’s ingrained in the company culture on every level.”Hines will be responsible for locating parts and fulfilling
parts orders and for providing customers and dealers withpricing, availability and lead times. He will assist with inven-tory control and the overall day-to-day operation ofKobelco’s parts distribution facility in Houston, Texas.“Dennis has a long history and proven track record as a
parts assistant,” said George Lumpkins, product marketingmanager of Kobelco. “His skills and experience in the indus-try will benefit our service department tremendously.”For more information, visit www.Kobelco-USA.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Kobelco AppointsHines as TechnicalParts Assistant
Hines will be responsible for locating parts and fulfill-ing parts orders and for providing customers anddealers with pricing, availability and lead times. Hewill assist with inventory control and the overall day-to-day operation of Kobelco’s parts distribution facili-ty in Houston, Texas.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 35
SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL
• No tools required• No expensive
hardware needed• No more rags
stuffed into hoses• No more messy
plastic caps• The ultimate
contamination control tool• One hand installation• Eliminate hydraulic
oil spills & clean up• Quick installation
& ease of usage• Safe for personnel
& environment• Industry acclaimed• 100% Made in USA
For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com
740 CHASSIS warranty available thru CAT® NetworkINCREASES COMBINATION of comfort, speed & maneuverabilityMORE DURABLE and longer life than Ag tractors
ELKADER, IOWA | 563-245-6871 | www.mobiletracksolutions.com
NEW
Page 36 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Annual Towmaster EventContinues Winning Streak
TOWMASTER from page 12
Dan Kraemer, regional sales manager of Tommy Gate, is with the G2-60-1342 EA 38with a 1300 lb. (590 kg) lift capacity and aluminum platform.
Titan Machinery Field Marketer Dave Sebald (L) and Mike Wentlandt, of Woodbury,Minn., look over this 2013 Case 580 Super N WT TLB.
Towmaster Trailer crew Anna Johnson (L), in-house sales, and Chris Pokornowski,sales manager, stand beside the 2012 Mack Truck with a Towmaster truck bodyfrom Nuss with a Towmaster pup trailer.
The Minnich A-1C and A-2C on-slabdrills are ideal for a variety of dowel pindrilling applications. With a total of fourmodels available in the A-1C (single drill)series, plus the versatile A-2C double drillmodel, contractors can easily choose theproper on-slab drill for any project, accord-ing to the manufacturer.“On-slab drills offer a smart alternative to
drilling dowel pin holes when it’s importantto leave the subgrade untouched,” said ToddJurjevic, sales and marketingdirector of Minnich.“Equipped with a steeringwheel to enhance operatoraccuracy and control, ouron-slab models are making abig impact with roadbuilders.”The most popular model
in the series requires a mini-mum cutout width of 48 in.(122 cm) to allow thedrilling apparatus to alignwith the edge of the slab.The units in the A-1C and A-2C product lines can reach amaximum drill depth of 18in. (46 cm) with an undercollar drill steel length of 24in. (61 cm). The powerful and effi-
cient A-1C and A-2C modelsrequire 92.2 SCFM and 90PSIG in terms of pneumaticpower, and the drills can beequipped with an optionaldust collection system toreduce debris on the job site.Another well-received fea-ture on the A-1C and A-2Cdrills is the automatic shutofffeature. This functionincreases the life of the drillby minimizing the frequency of dry-firing onthe job site.
A-1C On-Slab Single DrillThe A-1C units have an operating weight
of 670 lbs. (304 kg), and feature adjustabledrill height and depth. They also operate inthree positions; horizontal, vertical, and at a35-degree stitch. Furthermore, they are capa-ble of skew drilling for special applications. The A-1C on-slab series come standard
with urethane-filled, flat-proof tires to ensurejob site productivity. The models in the A-1Cline have a drilling distance from the top ofthe slab ranging from 1.5 to 11.75 in. (3.8 to30 cm). The A-1C series product line is available
from Minnich’s global network of distribu-tors and feature the following models:• A-1C-24• A-1C-30• A-1C-36• A-1C-48
A-2C On-Slab Double DrillThe A-2C, like its single drill counterpart,
allows drilling in horizontal, vertical and 35-degree stitch positions, making it a highly
versatile machine. Designed with productiv-ity in mind, the A-2C cuts operating timeroughly in half due to the incorporation ofthe second drill, according to the manufac-turer. Additionally, the A-2C is equippedwith a larger oiler for reduced maintenance,and the drill height and depth are adjustableat the shift of a lever from the easy-to-use,on-slab operator’s panel. The A-2C is capable of drilling a distance
from the top of the slab ranging from 1.5 to11.75 in. For more information, visit www.min-
nich-mfg.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
On-Slab Drills Offer Varietyof Dowel Pin Applications
The Minnich A-1C and A-2C on-slab drills are ideal fora variety of dowel pin drilling applications.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 37
OVER 40 LOCATIONS ACROSS 11 STATES TO BETTER SERVE YOU.
Page 38 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 39
Visit www.sealsaver.com for more information or contact us at 1-800-683-5189
Exclusively manufactured by:
Fluid ControlServices, Inc.1155 Allgood Road • Suite 15
Marietta, GA 30062
1-800-683-5189Fax: 770-509-5832
The SEAL SAVER*WILL:
• Eliminate rod scoring
• Extend the life of cylinder seals
• Protect cylinders from the elements
• Prevent pitting due tochemical washes
• Reduce particle contamination of hydraulic systems
• Minimize dings and dents associated with
falling debris*Patented
Made inthe USA
SEAL SAVERhas proven effective in
Recycling, Construction,Mining, Rock Quarries, Waste
Management, Refineries, WoodProducts Processing, Steel
Mills and Hot Slag Industries.
Page 40 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ARTBA Inducts Members to Transportation Hall of FrameOne of America’s top engineers, an
asphalt equipment manufacturing innovator,a 40-year New Jersey construction associa-tion executive and the founder of a leadingengineering firm were inducted June 3 intothe 2013 American Road & TransportationBuilders Association (ARTBA)Foundation’s “Transportation DevelopmentHall of Fame.”Launched in 2010, the Hall honors indi-
viduals or families from the public and pri-vate sectors who have madeextraordinary contributions to U.S.transportation development duringtheir careers. A committee ofjudges comprised of nine construc-tion industry journalists reviewedthe nominees in two categories:Transportation Design &
Construction Industry Innovators:Honors the men and women whodiscovered or created a “gamechanging” product or process thatsignificantly advanced transporta-tion design, construction and/orsafety. It seeks to honor the originalinnovator. • J. Don Brock, founder of Astec
Industries in Chattanooga, Tenn. Brock founded Astec Industries in 1972,
creating a company that “builds the equip-ment that moves America and the worldfrom rock-to-road and beneath.” The pio-neering products and technologies he per-sonally developed — he is the holder ofmore than 90 U.S. and foreign patents onconstruction machinery and drying equip-ment — have touch virtually every phase ofroad building and related construction activ-ity. In the process, he helped make our roadsand equipment safer and more efficient,durable, environment friendly and prof-itable. Today, Astec Industries is a leading man-
ufacturer of equipment for asphalt roadbuilding, aggregate processing, pipeline andutility trenching, oil, gas and water welldrilling and wood processing, offering morethan 200 products. Brock serves as executive chairman of the
Astec board of directors.In 2012, the ARTBA Foundation’s
TransOvation workshop and awards pro-gram were renamed in his honor. The eventwas created for the specific purposes of fos-tering innovative thinking within the trans-portation design and construction industryand publicly recognizing its proven innova-tors. The name plays off the meanings ofthree words — “transportation,” “innova-tion” and “ovation.” It includes an annualtwo-and-a-half day workshop led by world-renowned innovators from both within andoutside our industry and an annual awardsprogram.
• Othmar Hermann Ammann (posthu-mously), founder of Ammann & WhitneyConsulting Engineers, now based in NewYork.Believed to be the greatest bridge builder
of the 20th century, Ammann’s innovativegenius was his ability to anticipate futurechallenges. Born in Switzerland, Ammanncame to New York in 1904, where his gift forlong span bridge design and forward think-ing matched perfectly with the city’s need to
connect its five growing boroughs and theisland of Manhattan to the mainland UnitedStates. Over the course of his career, Ammann
was commissioned in the design and con-struction of more than 16 major bridge proj-ects, founded two public port agencies andlaunched two private engineering firms, thelatter of which, Ammann & Whitney, stillstands today, 50 years after his death.His designs were the result of innova-
tion upon innovation, culminating inrecord-breaking and aesthetically beauti-ful structures, including the iconic GeorgeWashington Bridge (GWB). Seeing thegreat potential of “motor-cars,” Ammanndesigned the GWB with future needs inmind. Originally constructed with sixlanes and two sidewalks, Ammann left a32-ft. wide unpaved strip in the center ofthe GWB and provided enough capacity toaccommodate a second, lower roadway,which were both utilized, in 1946 and1958 respectively. At the time of its com-pletion, it was the longest bridge span inthe world. Until about the time of the GWB, bridge
approaches were constructed such that traf-fic fed directly into local street networks.Recognizing that a distribution system oframps and connecting roadways would beneeded to disperse traffic, Ammann provid-ed some of these more complex connections,and provided the capacity for even more,into his design of the GWB.From the monolithic plate steel on the
Bronx-Whitestone towers, to the innovativetruss system of the Verrazano-Narrows
Bridge, which took into account the curva-ture of the earth and was the longest suspen-sion bridge in the world for almost 20 years,Ammann pushed the limits of possibility todeliver functional, forward-thinking and aweinspiring structures that today defineAmerica’s landscape. Transportation Design & Construction
Industry Leaders (Individuals or Families):Recognizes men, women and families whohave made significant contributions —
beyond just having successful businesses orcareers — that have notably helped advancethe interests and image of the transportationdesign, construction and safety industry.• Gene McCormick, a senior vice presi-
dent of Parsons Brinckerhoff in Naples, Fla.McCormick, a registered professional
engineer, has nearly 50 years of varied trans-portation experience, encompassing plan-ning, design, construction and operations inboth the public and private sectors. He hasbeen Parsons Brinckerhoff’s (PB) principal-in-charge or project manager on highway,bridge and airport projects across Americaand the world. He spent nearly seven yearsas project manager during the design andconstruction activities relating to the new 12-lane Woodrow Wilson Bridge nearWashington, D.C. The $2.5 billion projectwas on time and on budget.Prior to joining PB, McCormick had a
distinguished career in public service. From1989 to 1993, he was Federal Highwaydeputy administrator under PresidentGeorge H.W. Bush. He spearheaded devel-opment of the Bush Administration’s high-way/transit reauthorization proposal, signedinto law in 1991 and known as theIntermodal Surface TransportationEfficiency Act. McCormick also spent 25years with the Illinois Department ofTransportation, serving as deputy transporta-tion secretary and director of the office ofplanning and programming. His ARTBA leadership positions put him
in an elite class: 2005 chairman, senior vicechairman, first vice chairman, northeasternregion vice chairman, chairman of the
Highway Advisory Council, co-chair of theARTBA-AASHTO-AGC Joint Committee,and current trustee on the ARTBAFoundation. He also was co-chairman of theARTBA “TEA-21 Task Force,” whichdeveloped the association’s legislative blue-print for the surface transportation reautho-rization bill — SAFETEA-LU — signed byPresident Bush in August 2005.• Bob Briant Sr., (posthumously), the
long-time CEO of the Utility &Transportation ContractorsAssociation of New Jersey, inAllenwood.Briant was a New Jersey con-
struction industry legend and tire-less advocate. In 1972, he wasnamed the first full-time executivedirector of the fledgling UtilityContractors Association of NewJersey. He was guided by a simpleprinciple: his organization shouldbe the home for “those who striveto be the best.” In the early 1980s, as chief exec-
utive officer, he saw a major mar-ket development opportunity for
his members, added the “T” to the associa-tion’s name and became the state chapteraffiliate of the American Road &Transportation Builders Association. Briantspearheaded the development of programsand services that made UTCA a full-serviceassociation. In the process, the organizationgrew to include more than 1,100 members.He served as chairman and treasurer of
the New Jersey EnvironmentalInfrastructure Trust (NJEIT). Under hisleadership, NJEIT began by issuing $50 mil-lion in low interest loans annually to localmunicipalities and sewer authorities to helpthem improve their systems. Today morethan $500 million in annual loans are rou-tinely available to the agencies. Brianthelped start and served as chairman of thenational Cleanwater Construction Coalition,a group that pushed for federal legislation toincrease investment in water and wastewaterinfrastructure.He retired in 2006 and passed away at the
beginning of 2013.The 2012 Hall of Fame class, announced
last November, also was inducted during theJune 3 dinner and included:• Innovator: Harry Heltzer, former chair-
man and chief executive officer of 3MCompany (posthumously); and• Leader: James R. Madara, senior vice
president of Gannett Fleming in Allentown,Pa.For more information, visit
www.artba.org.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Launched in 2010 the Hall honors individuals or families from the public and private sectors who havemade extraordinary contributions to U.S. transportation development during their careers.
Terex Attachments Work With Compact Track LoadersUsing compact track loaders with differ-
ent attachments can revolutionize a smallbusiness, enabling it to bid on larger projectsand to work in all weather and ground con-ditions. By carefully selecting the rightattachments, customers can maximize theirprofits — the attachments pay for them-selves.Because compact track loaders use the
same attachments (buckets, dozer blades,mulchers, augers, trenchers, levelers, boxrakes, snow blowers, backhoes, etc.) andperform in the same applications as skidsteers (construction, landscaping, rentalforestry and agricultural applications), themost distinct advantage of a compact trackloader (CTL) is its maneuverability inadverse ground conditions. CTLs provideexceptional operation in muddy or snowyconditions where skid steers would not beable to work at all. Dozer blades are anexcellent example of an attachment that nor-mally isn’t used with skid steers due to theirlimited tractive effort, according to Terex. A compact track loader has an advantage
over a skid steer for dozing especially onuneven terrain, slopes, and muddy or snowy
ground conditions, which can be very chal-lenging and tough on skid steer loaders.CTLs are designed and built to handle thesetypes of conditions. Most operators start out by hitting the high
points in the first passes so that they have amore even surface to work on for completingthe finish grade.A Terex dozer blade, attached to a Terex
compact track loader, gives precision controland visibility for a wide range of earthmov-ing and site prep applications. The Terexloader’s traction, flotation and stabilityenables you to work in ground conditionsthat prevents other machines — even othercompact track loaders — from working atall, according to the manufacturer.Two different models match the blade to
the width of the machine. Hydraulic con-nections for power tilt and angle are viaquick disconnect fittings to the machine’slow flow auxiliary hydraulics. Control ofpower tilt and angle are via switches inte-grated in the machine’s right-hand joystick.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Atlas Copco Releases NewLine of Bucket CrushersAtlas Copco has
added a line of bucketcrushers to its silentdemolition tool range ofhydraulic attachments.Rig-mounted bucketcrushers solve job sitewaste managementissues by recyclingasphalt, stone and con-crete debris as well asmine, quarry and trenchmaterial. The recycledmaterial may be reusedon site or sold to thirdparties. The new linebecame available July1.In addition to the
environmental benefitsof recycling, AtlasCopco BC-modelhydraulic bucket crush-ers reduce the overallcost of a job by reduc-ing the amount ofequipment needed onsite and saving on trans-portation and dump siteexpenses. They are designed for use at allconstruction, demo or trenching work sitesand are even effective in tight workspaces.The four new Atlas Copco bucket crush-
ers were engineered with a wide aperturebucket and large capacity. The output sizeeasily adjusts from 0.5 to 4.75 in. (1.3 to 12cm) or from 0.5 to 4 in. (1.3 to 10 cm) inthe BC 1500. The bucket jaws, whichreceive the most wear, can be inverted. Thetop and bottom jaws can be replaced or sin-gle jaws can be rotated by 180 degrees toprovide for more even wear and longerservice life. With just two grease points,they require a relatively low level of main-tenance; Atlas Copco specifies a 30-hourgreasing interval.“Like all our hydraulic attachments, the
new bucket crushers are designed to deliver
our customers a lower total cost of owner-ship,” said Keith Becker, product develop-ment specialist of Atlas Copco hydraulicattachments. “The total cost of ownership isthe sum of all costs generated by a piece ofequipment throughout its lifetime, where theupfront investment only represents a minorportion of the total cost. Our approachassures our customers of a more profitablebusiness over time.”The models range in weight from 3,307 to
10,803 lbs. (1,500 to 4,900 kg) and may beused on carrier classes from 26,455 to132,277 lbs. (12,000 to 60,000 kg).For more information, visit
www.atlascopco.us.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Pages 41-45For more information about these attachments and more, visit our Attachments Section on our Web site at www.constructionequipmentguide.com
SECT IONAttachments
A Terex dozer blade, attached to a Terex compact track loader, gives precision con-trol and visibility for a wide range of earthmoving and site prep applications.
Atlas Copco’s BC 3500 bucket crusher isone of four new bucket crushers addedto Atlas Copco’s silent demolitiontool line.
Page 42 • August 17, 2013 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Allu System Stabilizes Soil Using Three Components The Allu stabilization sys-
tem consists of three compo-nents that increase thestrength and dynamic stiff-ness of soft soil in order toimprove its engineeringcharacteristics and to reme-diate contaminated soil. Thefirst component is the AlluPMX power mixer, a versa-tile hydraulic accessory forexcavators that mixes up to23 ft. (7 m) deep. The secondis the Allu PF pressure feed-er, which injects the binderagent via hoses into theground. The third compo-nent is the Allu DAC dataacquisition control system,which measures, controlsand provides data during thestabilization project.
The mass stabilizationmethod used by the Allu sta-bilization system is a quick,cost-effective and environ-mentally friendly solutionthat improves soft soils bymixing binder into clay, peat, mud ordredged sediments in comparison to tradi-tional methods of piling or soil replacement.It also can be used in treatment of contami-nated soils by encapsulating contaminantswithin the ground and preventing migrationto the surrounding areas, according to themanufacturer.
The Allu PMX power mixer effectivelyhandles various difficult materials like clayin different forms, peat, sludge, mud andcontaminated soil. It penetrates through hardcrust layers and mixes the soils effectivelybased on the intelligent positioning of thedrums. The drums rotate and mix material ina controlled way in all three different direc-tions simultaneously, while the conicalbinder nozzle efficiently spreads binder. Thehammers on the mixing drum are change-able and the straight one-piece binder tube ismaintenance-friendly. The Allu PMX powermixer is equipped with automatic torqueadjustment on the hydraulic motor, gear boxtemperature indicator and drum rotatingspeed indicator to ensure effective job sitecontrol. The PMX 500 model mixes up to16.5 ft. (5 m) deep and the PMX 700 modelmixes up to 23 ft. (7 m) deep.
Using compressed air, the Allu PF pres-sure feeder injects the binding agentbeneath the ground through a feeding pipe,directly to the middle of the mixing drumson the Allu PMX power mixer. The unit ismounted on a tracked chassis and isremotely controlled allowing the unit to fol-low behind the lead excavator onto the site.The Allu PFM pressure feeder mobile,
which is used for feeding dry binders, ismounted on a trailer that enables easy trans-portation from one place to another. Thismeans lower mobilization costs andenables cost-effective stabilization projectson smaller job sites.
The Allu DAC data acquisition controlsystem measures, controls and reports thefeeding operation and enables control of thewhole stabilization system, making it user-friendly, and allows the facility to transferdata onto other computers. Thus, the workdone is properly documented for qualitycontrol purposes.
The Allu Stabilization System providesthe following benefits:
• Wet site conditions can be overcome• Disposal of unsuitable soil is not
required• Imports of new material is greatly
reduced• Treated material can be placed under
structures• Site traffic and impact on the environ-
ment is reduced• Low operating costs• Homogenous mixture, unlike other
methods• A wide variety of strengths are possible• By-products from industry can be used
as raw materialsFor more information, call 800/939-2558
or visit www.allu.net. (This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
The ALLU PMX power mixer effectivelyhandles various difficult materials likeclay in different forms, peat, sludge,mud and contaminated soil.
The PMX power mixer, PF pressure feeder and DAC data acquisition control system make up the Allu stabiliztion system.
The Allu stabilization system increases the strength and dynamic stiffness ofsoft soil.
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • August 17, 2013 • Page 43
Now have instant access to Whayne Supply’slarge inventory of quality, used Caterpillar –and other branded equipment – right from your own computer! Check out photos,specs, condition and availability with a clickof your mouse! Internet site also links toother CAT dealers nationwide for a broadersearch on catused.com. Easy! Fast! Current!
3
Or, call us direct at 1-888-392-0057.WHAYNE SUPPLIESCONFIDENCE
YourSINGLE used equipment source!
hereClick for
whayne.com
computer!ownyourbrandedotherand
qualitofyrinventolargeNow have
photos,outCheckcomputer!from right–equipmentbranded
–Caterpillarused,yy,qualit
catused.com.onchrseanationwidedealersTAATCother
Internetmouse!yourofandconditionspecs,
computer!your
SINGLrouYYou
Current! Fast!Easy!catused.com.broaderafornationwide
tolinksalsositeInternetclickawithavailabilityand
photos,computer!
equipmentusedESINGL
!source
NCEECONFIDESILPPUNE SYAAYWH
1-888-392-0057.at directuscall,rr,O
1-888-392-0057.
Surf the Internet to the News, Equipmentand all the information
you need to keep up withthe Construction industry
@www.construction
equipmentguide.com
Page 44 • August 17, 2013 • www.constructionequipmentguide.com • Attachments & Parts Section • Construction Equipment Guide
Cat E Series Hammers for Medium,Large Excavators Offer EnhancementsCaterpillar has added three new models to the
E Series hammer line — H140Es, H160Es andH180Es — for use on medium and large exca-vators. Cat E Series hammers feature a ruggeddesign for extended durability and solid reliabil-ity, and features such as automatic shut-off,silencing and vibration buffering make themeasy on the operator. The E Series hammers aredesigned to be field serviceable with commonhand tools to keep them operating at peak per-formance.Cat hammers are wholly designed, engi-
neered and manufactured by Caterpillar and arean optimum match to Cat carriers. The threenew hammers match up with Cat excavatorsranging from the 324E to the 374D L. Mountingbrackets are available for Cat quick couplers.The energy classes of the H140Es, H160Es andH180Es are 6,000 ft.-lb. (8,135 J), 8,500 ft.-lb.(11,525 J) and 12,000 ft.-lb. (16,270 J), respec-tively.E Series hammers feature a new symmetrical housing
design, which allows rotating the housing 180 degrees tocompensate for wear, effectively extending the life of thehousing. The lower portion incorporates rock edges that addprotection to the housing and enable quick positioning ofboulders. An optional wear package is available to further
enhance hammer durability in severe applications.The new housing is built for strength and lowers life cycle
costs. A sleek, curved front and back profile eliminates stresspoints and transfers forces to the bottom of the hammer.One-piece side plates eliminate points where cracks canstart. The hammers are fully supported by Cat dealers so thatcustomers can work with a single organization for machineand work tool parts and service.The E Series Hammers build on the D Series hammers,
which the new hammers replace. Those features includeautomatic shut-off, which instantly stops the hammer whenthe tool breaks through material. The system increases ham-mer reliability and durability by eliminating the high internalstresses created by blank firing. Another feature continued ineach E Series hammer is the external pressure control valve,which reduces service time when an adjustment is necessary.Sound suppression is standard for environmental protectionand enhanced operator comfort.Caterpillar hammer settings are preprogrammed in Cat
excavator tool control systems for easy set up. The oil flowand pressure are fully adjustable in the tool control program.Also, actual hammer working hours can be recorded for rou-tine maintenance purposes.For more information, visit
www.cat.com/attachments/hammers.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Caterpillar has added three new models to the E Series hammerline — H140Es, H160Es and H180Es — for use on medium andlarge excavators.
The Montabert Micro CPA drilling attachment is designedfor use on a variety of carriers — including compact exca-vators, backhoe loaders and skid-steer loaders. These drillingattachments are the first of their kind in North America, buthave been used all over the world in pipeline trenching, util-ity work, tiebacks, reinforcement and long-reach applica-tions, according to the manufacturer.The Micro CPA H22/H25 drilling attachments, along with
the Micro CPA R25/R32, are single-pass drills with a feedrotation of 45 degrees from vertical. They create holes withdiameters measuring 1 to 1-3/4 in. and 1-1/4 to 3 in. (2.5 to4.4 and 3.2 to 7.6 cm), respectively, with maximum holelengths of 20 and 30 ft. (6 and 9 m). Both models can bemounted to carriers in the 5- to 10-ton (4.5 to 9 t) range.The Micro CPA 360 R25/R32 drilling attachments are
equipped with 360-degree rotation, allowing the operator toadjust from vertical, to overhead, to horizontal drilling withease. The R25/R32 provides a 1-3/4 to 3 in. hole diameter,with maximum hole lengths of 30 ft. and can be mounted tocarriers in the 8- to 15-ton (4.5 to 13.6 t) range. All Micro CPA drilling attachments use a high perform-
ance Montabert drifter and feature radio remote controlcapabilities, allowing the drilling attachment to be operatedfrom outside the cab of the carrier and eliminating potentialcarrier connection issues. An optional dust collector, withhigh suction capacity or a water injection system, is availableto reduce the dust escape. In addition to requiring less initial investment than their
conventional drilling counterparts, the Micro CPA drillingattachments offer the versatility of being quickly exchangedfor other attachments within minutes and are more easilytransportable between job sites. Backed by a vast parts, serv-ice and support system, this new line of drilling attachmentswill provide operators a reliable and productive drilling alter-native, according to the manufacturer. For more information, visit www.montabert.com. (This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Montabert’s MicroCPA Line Releasedin North America
All Micro CPAdrillingattachmentsuse a highperformanceMontabertdrifter andfeature radioremote con-trol capabili-ties, allowingthe drillingattachment tobe operatedfrom outsidethe cab of thecarrier andeliminatingpotential car-rier connec-tion issues.
®
visit: www.digrock.come-mail: [email protected]
call to order:866-928-5800 or 508-829-4855
"Leader in Excavator Rock Ripping Attachments"eadingdge
ttachments,
Inc.
Multi-ply Your Money!®
with the excavator rock ripping
Multi-Ripper BucketMulti-Ripper BucketMulti-Ripper
TM
Maximize forceone tooth at a time,using our patented
"Shanks on an Arc"technology.
6 to 9 times the forceof a standard 5 tooth bucket
4 times faster than a hammer
As seen on
Discovery channel’s
#1 hit show
“Gold Rush”
Multi-RipperBucket
Hi-CapMulti-Ripper
Bucket
Construction Equipment Guide • Attachments & Parts Section • www.constructionequipmentguide.com • August 17, 2013 • Page 45
TOUGH BREAKERS Powerful, Reliable andBuilt to Last.
Models 200 -12,000 ft. lbs. Designed and built in Germany In line power control valve Hybrid technology (gas/oil) Energy recovery Vibro silenced recoil box Oversized pistons
Put us to the test on your job!
For a quote contact Greg Petherbridge at 216.816.4834.
www.cp.com People. Passion. Performance.
Built to Last.Powerful, Reliable and
OUGH BREAKERS T
Powerful, Reliable andOUGH BREAKERS
Put us to the test on your job!
Oversized pistonsibro silenced recoil boxV
Energy recoveryHybrid technology (gas/oil)In line power control valveDesigned and built in GermanyModels 200 -12,000 ft. lbs.
Put us to the test on your job!
Oversized pistonsibro silenced recoil box
Hybrid technology (gas/oil)In line power control valveDesigned and built in GermanyModels 200 -12,000 ft. lbs.
Petherbridge at 216.816.4834.For a quote contact Greg
.cwwww
Petherbridge at 216.816.4834.For a quote contact Greg
.cp.com
People. Passion. Performance.
People. Passion. Performance.
PROVIDING SUPERIOR PRODUCTS & SUPPORT SINCE 1996
ASK ABOUT OUR BREAKER AUTOLUBE SYSTEMS!
Copyright 2013 Terex Corporation. All rights reserved. Terex is a registered trademark of Terex Corporation in the United States of America and many other Countries.
CRANES
DELIVERING SUCCESS is what drives us. We are a global manufacturer with strong local roots and a broadproduct offering that refl ects over a century of EXPERIENCE. We are committed to SPEED, aiming for thehighest level of responsiveness in everything we do. We focus on getting the job done, ensuring maximumuptime and the highest return on investment. Because our customers’ RESULTS are what really matter.
Contact us to learn how we can work for you.1-877-MY-TEREX 1-877-698-3739
www.terex.com/cranes
For Your Local Terex Dealer, Please Contact: Terex USA, LLC106 12th St. SE
Waverly, IA 50677 USAPhone: (319) 352-3920Fax: (319) 352-9395
email: [email protected]: www.terex.com/cranes
RTL Equipment Inc.(RT-T-HC/CC-AT)
www.rtlequipment.com3000 SE Gateway Drive
Grimes, IA 50111515-986-0262
Fax: 515-986-0267
2601 120th St. NWSwisher, IA 52338
319-857-4045Fax: 928-441-1269
Custom Truck & Equipment(RT-T-HC/CC-AT-BT)7701 Highway 24
Kansas City, MO 64125800-861-1065
www.cte-equipment.com
All Erection & Crane Rental Corp.
(RT-T-HC/CC-AT-BT-Towers)4700 Acorn Dr.
Independence, OH 44131800-232-4100
Fax: 216-642-7633www.allcrane.com
BRANCH LOCATIONSAll Crane Rental of PA, LLC
Pennsylvania412-382-4200
All Crane & Equipment Rental Corp.West Virginia
304-766-0300
Dawes Rigging & Crane Rental, Inc.Wisconsin
414-453-5335
Jeffers Crane Service, Inc.Michigan
419-693-0421
Page 46 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 47
> > >
Kennesaw, Georgia 30144www.kawasakiloaders.com
AN E.P.I.C. GENERATIONEFFICIENT
POWERFUL
INTELLIGENT
COMFORTABLE
Kennesaw, Georgia 30144www.kawasakiloaders.com
eo kilo
Howell Tractor480 Blaine StreetGary, IN 46406800/852-8816
Fax: 219/977-4220
Illinois Truck & Equipmentwww.iltruck.com320 Briscoe DriveMorris, IL 60450
815/941-1900Fax: 815/941-1486
Mid CountryMachinery
3478 5th Ave South (Bus. Hwy 20)
Fort Dodge, IA 50501800/206-5936
4734 Sergeant Rd. (Hwy 63)
Waterloo, IA 50701319/234-8710
106 8th StreetSergeant Bluff, IA 51054
712/943-4470
Custom Truck & Equipment
www.customtruckandequipment.com7701 E. 24 Highway
Kansas City, MO 64125800/861-1065816/241-4888
Fax: 816/241-8826
2121 Stephens BlvdJoplin, MO 64804
417/659-8969Fax: 417/659-8871
Kelbe BrothersEquipment Co., Inc.
www.kelbebros.com12770 W. Silver Spring Drive
Butler, WI 53007262/373-2151
Fax: 262/373-2102
4621 Dutch Mill RdMadison, WI 53716
608/221-8300Fax: 608/221-0610
Dwight Etts GrandEquipment Companywww.grandequipment.com3310 Hudson Trail Dr.Hudsonville, MI 49429
616/896-7700Fax: 616/896-6700
ConstructionMachinery Company
www.cmcky.com2911 S. English Station Rd.
Louisville, KY 40299502/267-4020866/901-2262
Fax: 502/261-9251
2235 Ragu DriveOwensboro, KY 42303
270/683-2000877/683-2262
Fax: 270/683-3727
267 W. Jay Louden Rd.Carrollton, KY 41008
502/732-4661Fax: 502/732-8355
Page 48 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Powering Your Productivity...For Over A Century
Portable Power
©2013 Doosan Infracore Portable PowerFind Us on DoosanPortablePower.com (800) 633-5206 Follow Us on
Aspen Equipment Co.
9150 Pillsbury Ave. SBloomington, MN 55420
(952) 888-2525
McAllisterEquipment Co.
150 E. North Ave.Villa Park, IL 60181
(630) 530-7600Alsip/Chicago, IL(708) 389-7700
E. Peoria, IL(309) 694-4455
Rockford, IL(815) 227-0555Springfield, IL
(217) 789-0351
4670 Crossroads Industrial DriveBridgeton, MO
(314) 291-1330Cape Girardeau, MO
(573) 334-5252Columbia, MO
(573) 814-0083Palmyra, MO
(573) 769-2056Carterville, IL
(618) 985-3399
DePere, WI(920) 532-0165
DeForest, WI(608) 842-4151
Eau Claire, WI(715) 874-5400Franksville, WI
(262) 835-2710Schofield, WI
(715) 355-9898Escanaba, MI
(906) 786-6920
9200 Liberty DriveLiberty, MO 60468
(816) 781-8070Springfield, MO(417) 865-0505
Wichita, KS(316) 943-1231
Great Bend, KS(620) 792-1361
Liberal, KS(620) 624-7274
Salina, KS(785) 825-8291
Colby, KS(785) 462-8211
Roland Machinery Co. Central Power Systems & Services
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 49
2216 N. Green Bay Rd.Waukegan, IL 60087
847/336-1205Fax 847/336-2697
27939 W. Concrete Dr.Ingleside, IL 60041
815/363-4100Fax 815/363-4109
2001 Cherry Hill Rd.Joliet, IL 60433815/464-6650
Fax 815/464-6951
Burris Equipment Co.Anoka, MN
888/448-5266753/323-1720Shakopee, MN877/753-6100952/445-6310
Corcoran, MN888/479-4342763/479-8200
Lano Equipment, Inc.1801 E. University Ave.Urbana, IL 61802
800/798-1772Fax: 217/337-1775
2900 E. Jackson St.Macomb, IL 61455
888/360-9225
200 North St.Prophetstown, IL 61277
877/221-0881
Birkey’s Construction Equipment124 N. Schmale Rd.Carol Stream, IL 60188
630/510-6050Fax 630/510-6051
1305 Sentry DriveWaukesha, WI 53186
262/521-5802Fax 262/521-5801
1st Choice Equipment LLC
3333 W. Coliseum Blvd.Fort Wayne, IN 46808
260/483-8868
4951 West 96th StreetIndianapolis, IN 46268
317/872-4877www.southeasternequip.com
Southeastern EquipmentCo., Inc.
Page 50 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
New Students Begin JohnDeere Technology Program
Murphy Tractor & Equipment Co. Inc.has sponsored a new class of students, whobegan the 74-week Construction & ForestryTechnology program at SoutheastCommunity College in Milford, Neb. The program is a partnership between
John Deere Construction & Forestry, partic-ipating John Deere dealerships, such asMurphy Tractor, and localcolleges. As a John Deerepartnership program, it isdesigned specifically to pre-pare individuals for trou-bleshooting and repair ofconstruction equipment. Successful students com-
pleting curriculum receivetuition reimbursement and atool allowance. Graduatesare guaranteed job place-ment at a Murphy Tractorlocation and earn an associate of applied sci-ence degree, in John Deere Construction &Forestry Technology. Names of pupils andparticipating Murphy Tractor branches are: • Dylan Axline — Lincoln, Neb.• Jeff Brandt — Park City, Kan.• Kodey Claussen — Great Bend, Kansas• Wade Edgington — Des Moines, Iowa• Ethan Fielder — Grand Island, Neb.• Charles Fitz — Ulysses, Kan.• Michael Golan — Columbus, Ohio• Paton Heusinkvelt — Omaha, Neb.• Tyler Litchkey — Des Moines, Iowa• George Stewart — Kansas City, Mo.• Troy Talbert — Ulysses, Kan.
• Werner Trierweiler —Sioux City, Iowa• Taylor Wenzl — Grand Island, Neb.• Matthew Willis — Topeka, Kan.“We are very excited and proud to support
the class of 2015. We have 14 students thissession, many of which previously workedat our dealer locations, before starting theirtraining at SCC,” said Rich Fawson, general
manager, service of Murphy Tractor &Equipment Co. Inc. “By teaming up with SCC and John Deere
C&F, we provide modern schooling, toolsand hands-on training to meet the demandsof ever-changing advances in machine tech-nology and design. Since the introduction ofthis program 13 years ago, it has proven tobe a valuable source in helping us grow ourskilled workforce, and add certified techni-cians committed to John Deere’s construc-tion equipment.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
(L-R, top row): Wade Edgington, Paton Heusinkvelt, Tyler Litchkey, Dylan Axline,Jeff Brandt, Charles Fitz and Troy Talbert. (middle row): Taylor Wenzl. L-R, bottomrow): Keith Tempel, instructor, Southeast Community College; George Stewart;Ethan Fielder; Michael Golan; Kodey Claussen; Werner Trierweiler and MatthewWillis.
“We are very excited and proud tosupport the class of 2015.”
Rich FawsonMurphy Tractor & Equipment Co. Inc.
Simplified profitability
Dynapac’s complete line of rollers and pavers combine years of experience with innovative thinking to make the job as fast, simple, and profitable as possible, from beginning to end.
F1000 series pavers: Cummins QSB 6.7 liter interim Tier 4 engineNorth American styling featuring the lowest deck height in the industry at 63 inches Easy to use control panel with one touch auto fill and cleaning modes
CA2500-CA4000 single-drum vibratory rollers:Static linear loads of 140-252 pliActive bouncing control Cummins or Deutz interim Tier 4 engine
CP224, CP224W and CP274 pneumatic tired rollers:Smooth start-stop system for directional changesWide-base tiresAir-on-the-run
Built for maximum performance, ease of maintenance and lower total cost of ownership, Dynapac’s rollers and pavers will provide you with more Uptime by Design.
www.dynapac.us
2300 Cassens DriveFenton, MO 63026
(636) 343-9970www.lubyequipment.com
Cape Girardeau(573) 334-9937
Springfield (217) 744-2233
Quincy (217) 222-5454
Caseyville(618) 397-9971
50 East Kingston Ave.Columbus, OH 43207
614-443-6541www.columbusequipment.com
Perrysburg(419) 872-7101
Cincinnati(513) 771-3922
Richfield(330) 659-6681
Cadiz(740) 942-8871
Dayton(937) 879-3154
Canton(330) 453-4521
Zanesville(740) 455-4036
Painesville(440) 352-0452
Piketon(740) 289-3757
DiamondEquipment Inc.1060 E. Diamond Ave.
Evansville, Indiana 47711(812) 425-4428(800) 258-4428
Fax: (812) 421-1036www.diamondequipment.com
Terre Haute(812) 299-4747(888) 343-4747
Fax: (812) 299-3687
Mt. Vernon(618) 242-2273 (800) 388-6396
Fax: (618) 242-9161
Bowling Green (270) 781-1061(800) 489-1061
Fax: (270) 781-0907
Nashville (615) 641-1100(800) 635-9454
Fax: (615) 641-1108
4100 Gardner Ave.Kansas City, MO 64120
(816) 241-9290(816) 241-1738www.vlpco.com
Joplin(800) 878-8223(417) 781-8222
Springfield(800) 955-2729(417) 887-2729
Wichita(800) 878-3346(316) 838-3346
Topeka(800) 878-4345(785) 267-4345
Garden City(800) 511-1435(620) 275-1996
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 51
Built from a lineage of market leaders for over 60+ years
ILLINOISBIRKEY'S CONST. EQUIPMENT
construction.birkeys.comGalesburg
(309) 341-4360Bloomington
(309) 827-0520Mattoon
(217) 235-3158Urbana
(217) 337-1781
DIAMOND EQUIPMENTwww.diamondequipment.com
Mt. Vernon(618) 242-2273Terre Haute
(812) 299-4747
ILLINOISWEST SIDE TRACTOR SALESwww.westsidetractorsales.com
Naperville(630) 355-7150
Rockdale(815) 730-9011
Rockford(815) 961-3160South Holland(708) 331-6362
Wauconda(847) 526-7700
MINNESOTAZIEGLER CAT
www.ZieglerCAT.comMinneapolis
(800) 352-2812Brainerd
(877) 829-9850Buhl
(800) 446-9795Columbus
(866) 982-5656Crookston
(800) 422-5782Duluth
(800) 421-3831Fergus Falls
(800) 346-7649Jackson
(866) 847-6401
MINNESOTAZIEGLER CATMarshall
(800) 325-4929North Mankato(877) 845-3938
Rochester(800) 247-1068
Shakopee(800) 352-2812
St. Cloud(800) 522-9469
WISCONSINMILLER-BRADFORD
& RISBERG INC.www.miller-bradford.com
Madison800-585-7219Eau Claire
800-585-7232DePere
800-638-7448Abbotsford
888-886-4410
INDIANADIAMOND EQUIPMENT
www.diamondequipment.comEvansville
(812) 425-4428
MACALLISTER MACHINERYSALES/RENTALS
www.macallister.comIndianapolis
(317) 545-2151Indianapolis
(317) 244-RENT (7368)Fort Wayne
(260) 483-6469 (heavy equip.)
(260) 969-3322 (rental store)Lafayette
(765) 449-8191 (heavy equipment)(765) 446-5600 (rental Store)
INDIANAMACALLISTER MACHINERY
SALES/RENTALSTerre Haute
(812) 478-3155(heavy equipment)
(812) 231-6000 (rental store)South Bend
(574) 288-6622Washington
(812) 254-1712Bicknell
(812) 735-0286Bloomington
(812) 349-9220Fishers
(317) 598-9700Greensburg
(812) 663-5829Richmond
(765) 966-0626Yorktown
(765) 759-2CAT (2228)
IOWAZIEGLER CAT
Altoona800-342-7002
Atlantic877-547-3819Sioux City
712-252-4401Fort Dodge
800-342-1848Mason City
800-342-1849Postville
800-526-0889
KENTUCKYDIAMOND EQUIPMENT
www.diamondequipment.comBowling Green(270) 781-1061
OHIO CATwww.OhioCAT.com
Richwood(888) 446-4658
WILSON EQUIPMENT CO.www.wilsonequipment.com
Corbin(606) 528-0700
Lexington(859) 254-6443Prestonsburg(606) 874-8036
MICHIGANMILLER-BRADFORD
& RISBERG, INC.www.miller-bradford.com
Negaunee800-562-9770
OHIOOHIO CAT
www.OhioCAT.comBroadview Heights(800) 837-6200Sharonville
(888) 332-4658 (Sales & Service)
(888) RENT-441 (Rental)Columbus
(888) 441-4658 (Sales & Service)(888) RENT-441 (Rental)
Perrysburg(888) 339-4658 (Sales & Service)
(888) RENT-441 (Rental)
OHIOOHIO CAT
Troy(888) 330-4658Youngstown
(800) 837-6203Cadiz
(800) 837-6204Canton
(800) 837-6207Zanesville
(800) 837-6205N. Canton
(888) 736-8443Oakwood Village(800) 633-1020
Authorized Doosan Dealers
ILLINOISLuby Equipment
Quincy217-222-5454
www.lubyequipment.com
INDIANARonson Equipment Co., LLC
Lowell219-696-5680 • 866-350-5538
www.ronsonequipment.com
IOWABrown’s Heavy Equipment, Inc.
Ames515-232-8456 • 800-723-5460
www.brownsheavyequipment.com
RTL Equipment, Inc.Grimes
515-986-0262 • 800-373-3916Swisher
319-857-4045www.rtlequipment.com
MICHIGANCarleton Equipment Company, Inc.
Kalamazoo269-343-2943 • 888-380-6420
Byron Center616-877-3388Chester�eld
586-463-3833Livonia
734-421-9999Saginaw
989-777-6666www.carletonequipment.com
Midway Rentals and SalesNegaunee
906-228-4200www.mrmqt.com
MINNESOTALano Equipment, Inc.
Shakopee952-445-6310 • 877-753-6100
www.lanoequip.com
MISSOURIBobcat of St. Louis
Valley Park636-225-2900 • 800-782-0854
Columbia573-886-9435 • 866-607-9435
www.bobcatofstl.com
Custom Truck & Equipment, LLCKansas City
816-241-4888 • 800-861-1065www.customtruckandequipment.com
Luby EquipmentCape Girardeau
573-334-9937www.lubyequipment.com
NORTH DAKOTABobcat of Devils Lake
Devils Lake701-662-5331
www.bobcatofgrandforks.com
Bobcat of Grand Forks, Inc.Grand Forks
701-772-5006 • 877-863-2362www.bobcatofgrandforks.com
Bobcat of WillistonWilliston
701-572-5050www.bobcatofgrandforks.com
SOUTH DAKOTADiesel Machinery, Inc.
Sioux Falls605-336-0411 • 800-456-4005
Rapid City605-348-7438 • 800-658-3047
Aberdeen605-725-4364 • 888-762-6312
www.dieselmachinery.com
WISCONSINSwiderski Equipment, Inc.
Mosinee715-693-3015
Wausau715-675-2391
Thorp715-669-5255
Antigo715-623-4668
Waupaca715-258-3266
www.swiderskiequipment.com
oo DdzeirohtAu
sreal Denaso
uq EonsRonIN
ybu.lwww-712Q Eyy EbyuL
ILL
CLL,.o C CotnmepiuANAID
moc.tnempquiey4545-222-
ycinuQtnemquip E
SINOIILL
o
okhaSmquip EoanL
ENNIM
mrm.www822-690
augeNaltne Rayy RwdiM
o DdzeirohtAu
s
eepo.cn I,tnem
ATTAOSE
omc.tqm0024-8
eneausealSdn asal
real Denaso
lal FxuoSieincha Mll MeseiDKADHTUOS
dnargftoacbob.www505-275-017
notsilliWilWf oatcboB
s.cn I,yy,re
ATTAOK
moc.skrofd05
nnotislil
quip ELTRhsnwor.bwww548-232-515
vaave Hs’nwroBI
osno.rwww865-696-912Luq EonsRon
cn Itnemquipmoc.ntempiuqyeaveh
0645-327-006 • 8smeA
.cn I,tnemquip Eyy EvWAO
moc.tnepmiuqneo8355-053-66 8 •08
llweoLCLL,.o C Cotnmepiu
acobb.www •5349-688-375umolC •009-252-2636yellVaf t oacbBoOUSSIM
eona.lwww •1036-544-259
omc.ltsfot5349-706-66 8
aibum4580-287-00 8
kra PsiuoL. tS
IROU
moc.pquie01063-57-77 8
eesinoMmpiuq EikrseidwSSNOCSIW
nihcamlesdie.www88 8 •4634-52-7506needrebA00 8 •8347-348-506y CitdipaR
00 8 •1140-633-506
.cn I,ntemNIS
moc.yren2136-26-78
n7403-85-60
y5040-654-0
492-343-962Ka
quip EnotelarCICHM
eltr.www-913
Sw620-689-515G
quip ELTR
0246-038- 888 •34ooazmal
.cn I,yy,anpmo CtnemNAGIICH
moc.tnempquie540-4785-
rehsiSw6193-373-00 8 •26
semirG.cn I,tnemquip
DHTRON
quieybu.lwww433-375ri GepaC
quip Eyy EbuLnakcurtmtosuc.www
•88841-42-618saansK E & & Euckk &r T TrmotsuC
ATTAOKAD
moc.tnempqui3799-4
uadeuip
arrtnem
d
moc.tnempquiden5061-168-00 8
yti CsCLL,tnemquip E
piuqieksreidws.www623-8525-17aacaupW664-3265-17
oigntA25-9665-17
phorT9325-765-17
ausauW30-3965-17
moc.tnemp66
a86
55
19
51
toelrac.www989S
-437L68 5eCh-616
royB492343962
moc.tnempquiento6666-777-wainga
9999-124-ianoviL
8333-364-dl�eretse8833-787-retnen Cro
0246038 888 •34
gftoacbob.www6 • 8005-277-107
andrGnarGf t oacbBo
gftoacbob.www266-107
sliveDDf t oacbBoDHTRON
moc.skrofdnar2632-368-776 • 8
skro F.cn, Iskrod Fn
moc.skrofdnar3135-2
kea LekaLs live
ATTAOKAD
Page 52 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Doosan and the Doosan logo are registered trademarks of Doosan Corp. in the United States and various other countries around the world. ©2013 Doosan Infracore Construction Equipment America. All rights reserved. | 0713866
Scott RommelPoland Sand and Gravel Poland, New York
Visit your local Doosan dealer to learn more. Scan the code or visit doosanequipment.com/dealer to see how close a dealer is to you.
“They’re engineered well. I would rate them as high as any machine out there right now.”
Doosan Delivers
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 53
Page 54 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Contractor Donates Time, Aids in Community Healingbuilding where the woman were held captive.
“We reached out to the city with our offer andthey accepted,” said Rob DiGeronimo, vicepresident. “We don’t consider it to be anythingmonumental, we feel it was a small contributionand we were happy to do it.”
Demolition on the 1,400 sq. ft. began early onthe morning of Aug. 7, where the demo crewwas met by hundreds of spectators, one of thembeing Michelle Knight, who handed out yellowballoons.
Knight attended the demolition to remind rel-atives of abducted children to never give uphope, adding that the array of balloons “repre-sents all the millions of children that were neverfound and the ones that passed away that werenever heard.”
The crowd of onlookers cheered on the democrew as its Caterpillar 320 excavator made itsfirst swipes at the roof of the house. As the debrisfell to the basement, church bells rung out.
It definitely had a different feel to his normaljobs, according to DiGeronimo, who added thatIndependence Excavating is accustomed todoing much larger and more challenging proj-ects.
“The only challenge was the safety aspect ofkeeping the debris away from all of the specta-tors,” he said, as well as from the adjacent hous-es, which were about 6 ft. (1.8 m) apart fromeach other on that block.
“It was a worthwhile experience, to see someof the mixed emotions and reactions, it was greatto help do our part,” said DiGeronimo.
The goal was to tear the house down and getthe property filled in, graded and seeded in a sin-gle day, according to Gus Frangos, president ofCuyahoga Land Bank, which supervised thedemolition.
After the demolition, which only took aroundan hour and a half, Kurtz Brothers, another localfamily-owned company, donated disposal feesat the landfill, where the debris was pulverizedto prevent looting.
Twenty-two thousand dollars was found andconfiscated from Castro’s house, which wouldhave covered the job (which was estimated tocost between $20,000 and $25,000) ifIndependence Excavating hadn’t offered todonate the work.
“The city of Cleveland has been very good tous, letting us utilize our talents, and we justwanted to do our part to give back,” saidDiGeronimo.
The money was then offered to the victims,but they asked that it be used for the communi-ty.
On what should be done with the land now,DiGeronimo said, “Do whatever’s best for theneighborhood, what provides them the best wayfor them to heal.”
(This story also can be found on ConstructionEquipment Guide’s Web site at www.construc-tionequipmentguide.com.) CEG
On what should be done withthe land now, Rob DiGeronimo,vice president, said, “Do what-ever’s best for the neighbor-hood, what provides them thebest way for them to heal.”
INDEPENDENCE from page 1
Demolition on the 1,400 sq. ft. began earlyon the morning of Aug. 7, where the democrew was met by hundreds of spectators,one of them being Michelle Knight, whohanded out yellow balloons.
Twenty-two thousand dollars was foundand confiscated from Castro’s house, whichwould have covered the job (which wasestimated to cost between $20,000 and$25,000) if Independence Excavating hadn’toffered to donate the work.
Vic DiGeronimo, president of Independence Excavating, reachedout to the city of Cleveland and offered the company’s time andequipment, at no cost, to demolish Ariel Castro’s house, the build-ing where three woman were held captive for more than a decade.
The crowd of onlookers cheered on the demo crew asits Caterpillar 320 excavator made its first swipes atthe roof of the house. As the debris fell to the base-ment, church bells rung out.
After the demolition, which only took around an hourand a half, Kurtz Brothers, another local family-ownedcompany, donated disposal fees at the landfill, wherethe debris was pulverized to prevent looting.
The six-axle steer dolly from TalbertManufacturing offers versatility, additionalsteering control and extra capacity to handleself-supporting superloads for a variety ofindustries. The 60-ton (54 t) dolly is ideal foreverything from heavy, low-riding materials,such as bridge beams and steel girders, totower sections for wind energy develop-ment. Originally developed for use with
Talbert’s double schnabel to haul wind ener-gy components such as tower bases, sectionsand blades, the six-axle steer dolly can nowbe used as a stand-alone product for alternatetrailer configurations. The unit comprises two groups of three
axles with the axles in each group spaced at60 in. (152 cm). With a bunk between thetwo groups that is connected to the rear-axlebearings through a tie rod system, the totalspread is 16 ft. 1 in. (4.8 m). This configura-tion allows operators to carry more weightand complies with federal bridge laws. With such a high center of gravity, these
loads have increased potential for dangerousoverturn situations. The six-axle steer dollyis 10 ft. (3 m) wide for increased roll stabili-ty and safety. Further, each individual axle ismounted to a radial bearing that provides atighter steering system for a more stable plat-form. The front three axles are fixed and non-
steerable and feature cut-off valves and liftchains. A mechanical self-steering systemallows the rear axles to turn progressively upto 30 degrees on the sixth axle. This incre-mental steering allows the rear dolly to moreeasily maneuver around a common centerpoint. The speed of steering also isadjustable to accommodate various load
lengths and the desired turning radius. Anoversteer alarm is mounted on the steer dollyalong with a wireless audio alarm with lightsfor the tractor cab. A hydraulic power pack allows operators
to override mechanical steering with a man-ual, wireless remote. This option is ideal forpilot car drivers escorting superloads. Inaddition, truck operators can adjust the bunkheight from 40 to 50 in. (101 to 127 cm) toclear overhead obstacles such as electricallines and traffic signs and obstructionsbeneath the unit such as speed bumps. Theunit also features Ridewell Model 240 airride suspension.The dolly can be picked up using its four
D-rings and stacked on a trailer or the frontjeep for easy transport after load delivery. For more information, call 800/348-5232
or visit www.talbertmfg.com.(This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Pages 55-65To view our current comparison trailer specification charts visit www.constructionequipmentguide.com
SECT IONTrucks & Trailers
The 912HM flatbed is equipped with a 131 hp (97.6 kW), Perkins E1104D-44TA Tier III engine and accommodates up to 22,000 lbs. (9,979 kg).
912HM Flatbed to Join Hydrema Dump Truck Product LineHydrema’s 912HM flatbed
truck will join seven other mod-els in the articulated dump truckproduct line. Based off the912HM articulated dump truckmodel, the 912HM flatbed fea-tures a 1.6 ft. (.5 m) extendedrear half with a built-in tippingframe ideal for the construction,utility and oil and gas industries.The 912HM flatbed is
equipped with a 131 hp (97.6kW), Perkins E1104D-44TATier III engine and accommo-dates up to 22,000 lbs. (9,979 kg)providing superior haulingcapacity and combined with a 24mph (38.6 kmh) travel speed,Hydrema’s newest additionoffers maximum productivity,according to the manufacturer.“We are pleased to expand our
product line with the addition ofthe 912HM flatbed truck,” said
Kris Binder, vice president ofHydrema North America. “Thelaunch of this new model closelyaligns with our goals to continu-ally diversify our equipmentofferings in order to provideinnovative solutions for theevolving needs of our cus-tomers.”The 912HM flatbed includes a
heavy-duty, robot-welded, artic-ulated chassis as well asHydrema’s front axle suspen-sion. The newly developed sus-pension features a center pivotwith pendulum bar and doublehydraulic stabilizers allowingoperators the option of lockingthe oscillation movement at up to22 degrees.Along with the durable
design, Hydrema’s 912HMoffers low ground pressure —7.6 front psi and 12.3 rear psi —which makes working on even
the softest ground conditionspossible. The machine utilizesits 2.6 ft. (.8 m) wide 30 in. (79cm) wheels, high ground clear-ance, articulated pivot steeringsystem and automatic weighttransfer to successfully and effi-ciently traverse delicate terrain.Standard features of the
912HM flatbed include a sus-pended front axle, suspendedcab, front outside heated mirrors,adjustable steering wheel, interi-or red cab lighting for night use,heated seats, radio with CD andMP3 players, rotating beacon,eight megabeam working lightsand automatic AC.For more information, call
877/449-3736 or visitwww.hydrema.us.
(This story also can be foundon Construction EquipmentGuide’s Web site at www.con-structionequipmentguide.com.)
The 60-ton (54 t) dolly is ideal for everything from heavy, low-riding materials,such as bridge beams and steel girders, to tower sections for wind energy devel-opment.
Talbert Six-Axle Steer Dolly Adds Capacity for Superloads
Page 56 • August 17, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Felling Trailers’ air ramp technolo-gy is such a popular option among sev-eral of its trailer models that FellingTrailers now offers it on its over theroad (OTR) semi trailers. Felling airramps operate via an air bag systemthat works off the same supply as theair brake system. Thus, any air-brakeequipped truck can operate a FellingTrailer equipped with air ramps with-out any other external power source(e.g. battery, gas engine or truck pow-ered hydraulic system).Additionally, air
ramps have lower maintenance costsover time and also eliminate the possi-bility of environmental cleanup issuesassociated with hydraulic ramp leaks,according to the manufacturer.Felling has outfitted air ramps on
everything from a 20,000 lb. (9,072kg) capacity tag trailer to a 100,000 lb.(45,359 kg) hydraulic detach trailer.The air lift system is able to lift inexcess of 5,000 lbs. (2,268 kg), whichgives it more
than enough power, and is available in36, 45 in. (91 and 114 cm), and full-width options on any air-brakeequipped trailer. For more information, call 800/245-
2809 or visit www.felling.com.(This story also can be found on
Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Over the Road Semi Trailers...
Air Ramp Technology Now an Optionfor Several Felling Trailer Models
Felling Trailers’ air ramptechnology is now offered on its over the road semi trailers.
Rugby Manufacturing recentlyunveiled the newly redesigned line ofEliminator LP dump bodies to bettermeet distributor and customer needs.The Eliminator LP line is available in car-bon steel, aluminum and stainless steelconstruction in 9 and 11 ft. (2.7 and 3.3m) lengths with interchangeable parts. A12 ft. (3.6 m) model is available in carbonsteel and aluminum. The steel modelnow features a seamless, one-piece 10gauge steel floor for optimum strengthand durability. A lower mounting heightimproves stability on all models, while afull 9-ft. inside diameter allows for fullsheets of plywood or other materials.All Rugby Eliminator LP models are
available with fold-down sides and fea-ture Rugby’s EZ-Latch upper tailgatemechanism, which releases the tailgatequickly and keeps it more secure whenclosed. New features also include a frontcorner post, standardized cabshields throughout the line,understructure with installed wire harness loops and bolt-ontarp hooks.The stainless steel Eliminator LP is corrosion-resistant
and highly durable. Rugby aluminum Eliminator LP bodiesweigh up to 50 percent less than traditional carbon steel andprovide an exceptional strength to weight ratio, resulting in
increased payload, improved fuel efficiency and corrosionresistance, according to the manufacturer.Rugby backs each of its dump bodies with a three-year
warranty. For more information, visit www.rugbymfg.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
Rugby Manufacturing Unveils NewEliminator LP Dump Body Design
All Rugby Eliminator LP models are available with fold-down sides andfeature Rugby’s EZ-Latch upper tailgate mechanism.
AIS ConstructionEquipmentCorporation
3600 North Grand River AvenueLansing, MI 48906
517-321-8000Fax: 517-321-6275
600 44th Street S.W.Grand Rapids, MI 49548
616-538-2400Fax: 616-538-0449
65809 Gratiot AvenueLenox, MI 48050586-727-7502
Fax: 586-727-7311
4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
8300 M-72 EastWilliamsburg, MI 49690
231-267-5060Fax: 231-267-5257
56555 Pontiac TrailNew Hudson, MI 48165
248-437-8121800-457-8121
www.aisequip.com
2216 N. Greenbay Rd.Waukegan, IL 60087
847-336-1205
2001 Cherry Hill Rd.Joliet, IL 60433815-464-6650
Fax: 815-464-6951
27939 W. Concrete Dr.Ingleside IL 60041815-363-4100
www.burrisequipment.com
949 3rd Ave.Windom, MN 56101
507-678-2752
Ditch Witch ofNorth Dakota1100 W. Main Ave.
West Fargo, ND 58078701-282-3600877-282-3600
Fax: 701-282-3636
2921 Twin City Dr.Mandan, ND 58554
701-663-9551877-663-9551
Fax: 701-663-0692
Vermeer Sales & Service661 Hwy T14Pella, IA 50219866-483-7633
Fax: 641-628-4283
Vermeer Siouxland4858 D. Ave.
Marcus, IA 51035712-376-2310
Fax: 712-376-2312
Vermeer of Eastern Iowa101 Commerce Blvd.Tipton, IA 50219563-886-2444
Fax: 563-886-2223www.vermeeriowa.com
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 17, 2013 • Page 57
6140 Highway 10 NWAnoka, MN 55303
763-323-1720 888-448-5266
Fax: 763-422-3949
3021 West 133rd Shakopee, MN 55379
952-445-6310 Fax: 952-496-0263
23580 Highway 55 Loretto, MN 55357
763-479-8200 Fax: 763-479-8201
1015 Highway 212 WestNorwood Young America, MN
952-467-2182Fax: 952-467-3259
901 Parker Ave. W.Dassel, MN 55325
877-570-2740www.farmriteequip.com
Scharber & Sons, Inc.13725 Main Street Rogers, MN 55374
763-428-4107 Fax: 763-428-2700 www.scharbers.com
1929 E. Madison Ave.Mankato, MN 56001
507-387-7376Fax: 507-387-7399
1400 W. Ogden Ave.Naperville, IL630-355-7150
310 W. 162 St. Rt. 6South Holland, IL
708-331-6362
3110 Prairie Rd.Rockford, IL
815-961-3160
1560 North Old Rand Rd. Wauconda, IL847-526-7700
600 Walnut CtRockdale, IL
815-730-9011
2170 South Yost Ave.Bloomington, IN 47403
812-333-9677Fax: 812-333-9731
5400 Industrial Rd.Fort Wayne, IN 46825
260-482-8576Fax: 260-483-4057
7355 East 30th St.Indianapolis, IN 46219
317-544-3411
Lafayette, IN 47905765-477-6933
Fax: 765-448-9038
South Bend, IN 46619574-232-1461
Fax: 574-233-3324
www.westsidetractorsales.com
Page 58 • August 17, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Plan to Save Trucking Industry $1.7B AnnouncedU.S. Transportation Secretary
Anthony Foxx announced a propos-al to eliminate a burdensome dailypaperwork requirement for profes-sional truck drivers that will reducecosts to the industry by an estimated$1.7 billion annually while stillmaintaining the department’s highsafety standards.“President Obama challenged his
administration to find ways to cutwaste and red tape, a challenge Ipledged to meet during my confir-mation hearing,” said Foxx. “Withtoday’s proposal, we are deliveringon that pledge, saving business bil-lions of dollars while maintainingour commitment to safety. It’s thekind of win-win solution that I hopeour department will continue to findover the coming months.”“This is a great example of the
progress being made under theadministration’s regulatory look-back initiative,” said Office ofManagement and Budget DirectorSylvia Mathews Burwell. “Theadministration is carefully examin-
ing rules on the books to see wherewe can streamline, modify or repealregulations to reduce unnecessaryburdens and costs on businesses andconsumers. By making this com-mon-sense change to the DVIRprocess, the Department ofTransportation is dramaticallyreducing paperwork burdens on thetrucking industry, while continuingto protect public safety.” Current federal regulations
require commercial truck drivers toconduct pre- and post-trip equip-ment inspections and file drivervehicle inspection reports (DVIRs)after each inspection, regardless ofwhether or not an issue requiringrepairs is identified. DVIRs are the19th-highest paperwork burden,based on the number of hours need-ed to comply, imposed across allfederal agencies and only 5 percentof reports filed include defects.Foxx’s announcement represents thelargest paperwork reductionachieved since President Obama’sMay 2012 executive order to reduce
regulatory burdens on the privatesector.Under the proposed change
announced, commercial truck driv-ers would continue conducting pre-and post-trip inspections. However,DVIRs would be required only ifdefects or deficiencies were discov-ered by or reported to the driver dur-ing the day’s operations.“We can better focus on the 5 per-
cent of problematic truck inspectionreports by eliminating the 95 percentthat report the status quo,” saidFederal Motor Carrier SafetyAdministrator Anne S. Ferro.“Moving to a defect-only reportingsystem would reduce a significantpaperwork burden facing truck driv-ers and save the industry billionswithout compromising safety.”Federal regulations require that
every commercial vehicle in theUnited States undergo a thoroughannual safety inspection conductedby a certified commercial vehiclemechanic. In addition, state and fed-eral inspectors conduct unan-
nounced, random inspections ofcommercial vehicles at terminals,weigh stations, truck stops along theroadside and at destinations.Vehicles that fail random safetyinspections are immediately placedout of service and not allowed tooperate until the identified safetyproblems are addressed. In 2012,approximately 3.5 million randominspections were conducted.In June 2012, the Federal Motor
Carrier Safety Administration elimi-nated a comparable requirement fortruck drivers operating intermodalequipment trailers used for trans-porting containerized cargo ship-ments. By eliminating a requirementfor drivers to submit “no defect”inspection reports of intermodalequipment trailer, cost savings to theintermodal industry is estimated tobe $54 million annually without anadverse impact upon safety.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
What’s going on in
YOUR COMPANY
We want to know!
Give us a call.
ConstructionEquipment
Guide
(800)523-2200
OR
FAX: (215)
885-2910
Truck Inserts Converts Regular Pickups Into Dump TrucksBuyers Products offers DumperDogg
dump inserts for use with pickup trucks.The inserts are available in 12-gauge
steel and 304 stainless steel, for both 6-and 8-ft. (1.8 and 2.4 m) truck beds, aswell as in polymer for 8-ft. truck beds.The steel and stainless steelDumperDogg inserts have a 2-cu.-yd.(1.5 cu m) capacity in the 8-ft. truckinsert and a 1.5-cu.-yd. (1.1 cu m) capac-ity in the 6-ft. insert. The polymer inserthas a 1.6-cu.-yd. (1.2 cu m) capacity.DumperDogg inserts feature a struc-
tural steel frame with a black powdercoat finish for corrosion resistance.Sturdy 3/4-in. (1.9 cm) tailgate hingepins provide support for the inserts’ pay-load capacity of 6,000 lbs. (2,721 kg).The 2 hp (1.5 kW) motor for thehydraulic pump can be operated frominside the truck cab using the tetheredcontrol box for power-up and power-down. Dump angles on the inserts rangefrom 0- to 40-degrees.Along with heavy-duty construction,
the inserts feature a double-pivoting,removable tailgate. DumperDogginserts also come standard with safetyfeatures that include a manual safety bar
and tailgate chains.“The DumperDogg truck insert
makes pickup trucks more versatile bygiving users the ability to have a dumptruck without having to purchase or renta dump truck,” said Brian Smith, mar-keting manager at Buyers Products.“These inserts are ideal for landscapersand contractors who use pickup trucksfor their businesses and need to hauland dump mulch or other material.” DumperDogg pickup inserts also are
available with optional bolt-on cabguards, tarp kits and wall extensionbrackets.Established in 1946, Buyers Products
Company is a manufacturer of productsfor the mobile equipment industry.Buyers manufactures a full line of truckaccessories and equipment including itsSnowDogg line of snow plows,ScoopDogg line of snow pushers,SaltDogg line of salt spreaders,DumperDogg dump inserts and a com-prehensive line of toolboxes.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
The DumperDogg truck insert gives users the ability to have a dump truck without havingto purchase or rent a dump truck.
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 17, 2013 • Page 59
JEFF BELZER’SLAKEVILLE, MN
CHEVROLET
A POWERFULWORKFORCE
CALL FOR
SPECIAL PRICING
FOR MNLA-AGC-NAHB
MEMBERS ON
SELECT VEHICLES
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications. As a Chevy Business Central dealer, we’re all business.
COMMERCIAL HEADQUARTERSJeff Belzer Chevrolet, 50 & Cedar, BX 965 Lakeville, MN
Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
©2009 General Motors
George Miller [email protected]
John Zadurski [email protected]
2012 2500 expres vans, from $24,999. 2013 k3500 4x2 chassis 84 c/a, gas,posi, sno prep, from $26,999.
Cube, 4-12’ Cutaways, In Stock 12’ Flatbed, Gas, 4x2
84 C/A, Gas, 4x4, 11’ Tipper 2013 k3500 crew long box, wt, 6.0 gas,has to go $33,299, plus ttl
2013 k2500, ready for plow, call for pricing.
2 Crew Gas 4x4’s ChassisInbound
Call for Info
Page 60 • August 17, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 17, 2013 • Page 61
Page 62 • August 17, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
www.ZipsTransportEquipment.com
Smartphone UsersVisit Us Online
(877) 343-5319
TrailMax FWTD-70-PR8 degree load angle with 33" deck height
XL Specialized XL-70-HDG13HP Honda Motor with aluminum pullouts
Smart Body SBMT Construction Service BodyModular, Extra Large Toolboxes, Gooseneck Ball,Transfer Tank, Aluminum Deck, Customizable
Excellent for Pavers!
HydraulicDetachableGooseneck
Design Your UltimateWork Truck!
2000 STERLING M8500, Cummins Engine, 8.3, 240 HP, Automatic, 6.14Ratio, Single Axle, 12,000 # FA, 21,000 # RA, 101,985 mi, White,Cummins 8.3 240HP Allison Automatic MD 3060 Air Brakes 12000# FrontAxle 21000# Rear Axle 6.14 Ratio 35000# GVW 238” WB A/C 1100x22.580% 1100x22.5 90% Grips Rear Differential Lock Axle 12’ Crysteel DumpBody & Hoist Air Lines Run to Rear Hitch Plate Pintle Hitch Electric TarpSouthern Rust Free County Truck, Stk #: 4748, $36,950
2008 FORD 4X4 F350, 6.4 Turbo Diesel, Automatic Transmission, 141”WB 60”CA, A/C, Tilt Wheel, Speed Control, Extended Engine Warrantyuntil 5-11-2014 or 200,000 Miles, New 9’ Crysteel Dump Body, Hoist,Hitch Plate, Receiver Tube, Dump Truck, 81,727 Miles, Engine Size: 6.4Turbo Diesel
2004 STERLING L9500, Mercedes 350 HP, 248,645 mi, Fuller FR013210C10 Speed, 3.91 Ratio, 295 x 22.5 Front Tires 70%, 295 x 22.5 Rear Tires95%, Air Ride, Aluminum Fuel Tanks, Air Conditioning, Air Ride Seat,Locking Differential, Air Dump Valve, 4 Aluminum Wheels, DoubleFrame, 16’ Crysteel Contractor Body with “AR400” Floor-Split fold downsides Air PTO FL18 Hoist Hitch Plate with 40,000lbs Pintle HookReceiver D-rings-7 Hole lite Plug Trailer Lines with Glad Hands run toHitch Plate Electric Brake Central, Stk #: 5176A, $49,950
2005 INTERNATIONAL 8600, Automatic, 336,018 mi, Extended Cab,Cummins ISM 410HP, FROF16210C 10 Speed, Air Conditioning, CruiseControl, Air Ride Driver Seat, Single Passenger Seat, Frame Lengthenedfor Dump Body, Used 14’ 6” Dump Body & Hoist, 52” Front - 36” Sides- 42” Tailgate AR 400 3/16” Floor Aero Electric Tarp Air Shift PTO 45Ton Air Cushion Pintle Hitch 2” Receiver Tube Air Lines Run to HitchPlate Electric Brake Controller ECM Miles 336,039, Stk #: 5162
JEFF BELZER’SDodge Ram Tough
Vehicles ready for work at a moment’s notice. Professionals trained to keep business owners happy. Service facilities equipped for commercial applications.
COMMERCIAL HEADQUARTERSJeff Belzer Ram Dodge, 21111 Cedar Ave., Lakeville, MN
Please Call the Commercial Dept, 1-877-671-8226 OR 952-469-4444All Rebates & Incentives to Dealer, Must Qualify for Same, Prices Subject to Change
George Miller [email protected]
John Zadurski [email protected]
Gas-2500, Ready for Plow 2012 Ram 5500 4x4, 84” c/a, Sno-prep, Power Group, From $42,999
2 ram 5500 4x4 108 c/a.please call for spec
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 17, 2013 • Page 63
Vermeer Sales & Service
1675 126th St. WestBurnsville, MN 55337
952-890-6144Fax: 952-882-2980
www.vermeerofminnesota.com
Midwest Trailers Plus, Inc.548 29th St. West
Des Moines, IA 50265515-223-8463
Toll Free: 888-560-2787Fax: 515-223-6446
www.midwesttrailersplus.com
Farm-Rite Equipment Inc.
901 Parker Ave WestPO Box 26
Dassel, MN 55325320-275-2737
Toll Free: 888-679-4857www.farmriteequip.com
K.C. Bobcat2209 W. 40 Highway
Blue Springs, MO 64015800-697-4228816-229-7631
Olathe, KS800-598-4228Platte City, MO800-984-3001
McCann Industries, Inc.
Addison543 South Rohlwing Road
Addison, IL 60101630-627-0000 • Fax: 630-627-8711
Bolingbrook250 East Frontage RoadBolingbrook, IL 60440
630-739-7770 • Fax: 630-739-7699Chicago
2350 South Laflin StreetChicago, IL 60608
312-942-9200 • Fax: 312-421-3502Crestwood
4701 West 137th StreetCrestwood, IL 60445
708-597-3110 • Fax: 708-597-9945
McHenry4102 W. Crystal Lake Road
McHenry, IL 60050815-385-0420 • Fax: 815-385-2975
Schererville1133 Indianapolis Boulevard
Schererville, IN 46375219-865-6545 • Fax: 219-865-0269
Wauconda1360 North Rand Road
Wauconda, IL 60084847-526-9444 • Fax: 847-526-9448
www.McCannOnline.com
Titan MachineryShakopee Division
6340 Hwy 101Shakopee, MN 55379
952-445-5400 • 800-795-9274Fax: 952-445-0365Duluth Division4311 Haines Rd.
Hermantown, MN 55811218-727-3038 • 800-795-0117
Fax: 218-727-2827Rogers Division
14375 James Rd.Rogers, MN 55374
763-428-5099 • Fax: 763-428-5051Industrial Division
N1626 Wuensch Rd.LaCrosse, WI 54601
608-788-1025 • 800-780-1025Fax: 608-788-1027
Page 64 • August 17, 2013 • www.constructionequipmentguide.com • Trucks & Trailers Section • Construction Equipment Guide
Construction Equipment Guide • Trucks & Trailers Section • www.constructionequipmentguide.com • August 17, 2013 • Page 65
Page 66 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Hyster Company has sup-plied one of its HysterJ35XN lift trucks to theduck-men of DuckCommander, makers ofworld-famous duck calls. The Duck Commander
business experienced signif-icant growth in 2012 as aresult of its popular televi-sion show, and needed tomake significant operationalimprovements. They askedthe local Hyster dealer,Deep South Equipment, tohelp them make their facili-ty more productive. DeepSouth Equipment installedracking in the warehouse,and recommended the elec-tric Hyster J35XN lift truckfor its tight turning radius,its low cost of operation andits durability.“There is no doubt that
Willie, Phil and the otherduck-men are tough guys,”said John Parsons, presi-dent/owner of Deep SouthEquipment. “That’s why it
makes sense that DuckCommander chose a toughHyster forklift to help movetheir business forward.”“At Duck Commander,
we love our Hyster forkliftthat we got from DeepSouth Equipment,” saidWillie Robertson. “Whenrunning my family businesshere at Duck Commander, Idon't always get a choice ofemployees because it’s fam-ily. However, I do get tochoose the equipment wehave, and the Hyster forkliftis efficient and easy to drive.This ease gives my guysmaximum productivity andthat is what I am looking for.It’s versatile and so easy torun that even Jase andGodwin can run the thing.”For more information,
visit www.hyster.com. (This story also can be
found on ConstructionEquipment Guide’s Web siteat www.constructionequip-mentguide.com.)
Duck Commander Chooses Hyster Lift Truck for Duck Call
The employees of Duck Commander — and stars of the popular Duck Dynasty TV series — are using a HysterJ35XN lift truck in their warehouse.
Midwest Dealers Among Morbark’s Top PerformersMorbark Inc. recognized four of its top
dealers — Columbus Equipment Companywas named Industrial Dealer of the Year forthe second straight year, while AlexanderEquipment Company, Nortrax Northeast,and Schmidt Equipment Inc. earned GoldTier Dealer status for their tree care productsdivisions.“Morbark’s dealers are instrumental to
our customers’ success,” said John Foote,vice president of sales and marketing ofMorbark. “They provide more than just ourhigh-performance equipment; they give ourcustomers local knowledge and support tohelp them grow and maintain their business-es. We’re honored to recognize these dealerswho are as devoted to continuous improve-ment as Morbark is. We’re proud to havethem in the Morbark family.”Established in 1952 and known as
“Ohio’s Dependable Dealer,” ColumbusEquipment earned the Morbark IndustrialDealer of the Year Award for its 2012 salesof industrial equipment. ColumbusEquipment operates in 10 locations in Ohio,and serves customers in Ohio, Indiana,Kentucky and West Virginia.Morbark dealers are reviewed and scored
annually on their customer service, businessplan, equipment and parts sales, service and
warranty process, marketing efforts andmuch more. As a result of the 2012 reviewprocess, Alexander Equipment and NortraxNortheast retained Tree Care Product GoldDealer status while Schmidt Equipmentearned its first Gold Tier ranking, markingthese companies as exceptional in all aspectsof customer support.
Alexander Equipment, Nortrax Northeastand Schmidt Equipment all represent boththe Tree Care Products and Industrial linesfor Morbark. Alexander Equipment, basedin Lisle, Ill., handles Morbark sales fornorthern Illinois; Nortrax Northeast has 10locations covering Maine, New Hampshire,Vermont and northeastern New York; and,
with five locations, Schmidt Equipmentserves Morbark customers in Massachusettsand Rhode Island.For more information, visit www.mor-
bark.com. (This story also can be found on
Construction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
(L-R) are Charlie Stahl,Morbark territory spe-cialist; Jesse Garber,Columbus Equipment
Company environmentalsales; Jim Shoemaker Jr.,Morbark president; Tim
Smith, ColumbusEquipment Company envi-ronmental division salesmanager; Bob Stewart,Columbus Equipment
Company environmentalsales; John Foote,
Morbark VP of sales andmarketing; and DonDuperow, Columbus
Equipment Company envi-ronmental sales.
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 67
A V A I L A B L E N O W A T
What began in 1965, has resulted in a new breed of Mustang skid steer loader; the R Series. These new radial-lift skid steer loaders are setting a new industry standard. With advanced hydraulics, state-of-the-art engines and an upgraded operators station, these new members of the Mustang herd come ready to work, just as they did 125 years ago.
STAR EQUIPMENT LTD.1401 2ND AVENUE
DES MOINES, IA 50314(515) 283-2215
FAX: (515) 283-0295(800) 369-2215
2625 W. AIRLINE HWY.WATERLOO, IA 50703(319) 236-6830
FAX: (319) 236-6834(800) 791-9249
2950 6TH STREET SWCEDAR RAPIDS, IA 52404
(319) 365-5139FAX: (319) 365-6726(800) 728-5139
2100 E. LINCOLN WAYAMES, IA 50010(515) 233-9500
FAX: (515) 233-9505(866) 856-2312
HARDINGS HEAVYEQUIPMENT
109 W. COMMERCIAL AVENUELOWELL, IN 46356(219) 696-8911
FAX: (219) 696-8915WWW.HARDINGSINC.COM
STARE Q U I P M E N T
LT D .
WWW.STAREQUIP.COM
Page 68 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
CONSTRUCTION�EQUIPMENT�GUIDE�•�www.constructionequipmentguide.com�• August�17,�2013�•�Page�69
12920 Gravois RoadSt Louis, MO 63127
314/729-0125
12321 E. Pine StreetTulsa, OK 74116918/438-1700
6715 W. RenoOklahoma City, OK 73127
405/495-7820
Kansas City, KS913/850-6300877/851-5729
Cleveland Crane & Shovel Sales, Inc.26781 Cannon RoadCleveland, OH 44146
440/439-4749800/362-8494
Fax:�440/439-2177
www.craneandshovel.net
930 W 138th StreetRiverdale, IL 60827
708/656-7700Fax: 708/532-127325210 Brest RoadTaylor, MI 48180734/947-9250
Fax: 734/947-9260
920 S State Road 39Lebanon, IN 46052
765/482-4145Fax: 765/482-49282126 Glenview DriveEvansville, IN 47720
812/422-6912Fax: 812/422-6982
Aspen EquipmentCompany
www.aspenequipment.com1525 S.E. Cortina Dr.Ankeny, IA 50021515/965-1000
Fax: 515-965-179011475 S. 153rd St.Omaha, NE 68138402/894-9300
Fax: 402-894-9302
Kirby Smith Machinery Inc. Walter Payton Power Equipment LLC
The GMK6300L all-terrain craneAt Grove, we provide high-performance features, reliable 24/7 support and a quality product lineup – because cranes are all we do. With 15 all-terrain models ranging from 40-450 USt, we’ve got a crane to handle any jobsite.
Featured is the GMK6300L – its 350 USt capacity, 263 ft. boom, Allison transmission and MEGATRAK™ suspension system are ideal for a wide range of applications and will keep you working.
For more information, visit www.manitowoccranes.com
Tiltable cab
MEGATRAK™
Removable outrigger box
LEADERS IN LIFTING
Page 70 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
John Deere Power System’s EnginesReceive Final Tier IV Certification John Deere Power Systems’ (JDPS) engine lineup
174 hp (130 kW) and above has received U.S.Environmental Protection Agency (EPA) FinalTier IV, European Union (EU) StageIV and California Air ResourcesBoard (CARB) emissionscertification. The PowerTechPVS 6.8L, PowerTech PSS6.8L, PowerTech PSS9.0L and PowerTechPSS 13.5L models arethe first John Deereoff-highway enginesto receive Final TierIV, Stage IV andCARB emissions cer-tification in the 174 to750 hp (130 to 560kW) power catego-ry.“We began the
design process bylistening to ourcustomers, and wehave worked withthem every step of theway to ensure our solutionsdeliver the industry-leading per-formance and low operatingcost they expect from JohnDeere,” said Geoff Stigler, managerof worldwide marketing of John DeerePower Systems. “Our building-block approachhas enabled us to adopt the best available technologies tomeet each new regulatory tier, and this continues with FinalTier IV/Stage IV.”Final Tier IV/Stage IV emissions regulations begin Jan. 1,
2014, for engines 174 hp (130 kW) and above, and requirean 80 percent reduction in nitrogen oxides (NOx) from pre-vious Interim Tier IV/Stage III B requirements. Particulatematter (PM) levels remain the same as those mandated byInterim Tier IV/Stage III B regulations.For Final Tier IV/Stage IV, John Deere continued with its
planned building-block approach by developing the integrat-ed emissions control system to meet the challenging stan-dards. For 125 hp (93 kW ) and above engines, John Deerewill offer models equipped with an integrated emissions con-trol system configured with cooled exhaust gas recirculation(EGR), a diesel oxidation catalyst (DOC) and diesel particu-late filter (DPF), as well as a selective catalytic reduction(SCR) system. The DOC/DPF reduces PM while cooledEGR and the SCR system reduce NOx.“The certifications of our PowerTech engines 174 hp and
above are tremendous milestones for John Deere, and con-firm that our customers can be confident in our tailored inte-grated emissions control systems, which deliver innovativetechnologies capable of meeting more stringent emissionsstandards,” Stigler said. “We are confident that all of ourFinal Tier IV/Stage IV solutions will provide the power, per-formance, ease of operation, fluid efficiency, reliability, dura-
bility and economicaloperating costs cus-tomers expect from JohnDeere.”With the use of SCR
technology for Final TierIV/Stage IV engines,total fluid economybecomes impor-tant, and JohnDeere is confidentthat its total fluidoperating costswill maintain anindustry-leadingposition. Total fluid
economy takes intoaccount both diesel fuel and
diesel exhaust fluid (DEF). DEFconsumption with John Deere Final
Tier IV/Stage IV engines will be 1 to 3percent of diesel fuel consumption
depending on the application. With diesel fueleconomy gains achieved through increased injection pres-sures and the optimized integrated emissions control system,John Deere Final Tier IV/Stage IV engines are expected toimprove upon the total fluid economy of Interim TierIV/Stage III B engines. Low DEF consumption also meansthe DEF tank size can be smaller, minimizing space requiredon equipment. Other benefits of low DEF consumptioninclude less onsite bulk storage requirements for customersand extended DEF filter service intervals.“Our Interim Tier IV/Stage III B engines have been tested
in many applications around the world and have establishedthe benchmark for fluid economy,” Stigler said. “We’re con-fident that our Final Tier IV/Stage IV engines will continueto provide world-class fluid economy while deliveringimproved performance and higher machine productivity.” Models and power ratings for the certified Final Tier
IV/Stage IV engine lineup 174 hp and above include:• PowerTech PVS 6.8L: 185 to 250 hp (138 to 187 kW)• PowerTech PSS 6.8L: 225 to 300 hp (168 to 224 kW)• PowerTech PSS 9.0L: 250 to 425 hp (187 to 317 kW)• PowerTech PSS 13.5L: 414 to 600 hp (309 to 448 kW)For more information, visit www.JohnDeere.com/
jdpower.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
John Deere Power Systems’ (JDPS)engine lineup 174 hp (130 kW)
and above has receivedU.S. EnvironmentalProtection Agency(EPA) Final Tier IV,European Union(EU) Stage IV andCalifornia AirResources Board(CARB) emissionscertification.
BRANDEIS MACHINERY & SUPPLY COMPANYwww.brandeismachinery.com1801 Watterson Tr.Louisville, KY 40299502/491-4000502/499-3195 Fax Evansville, IN812/425-4491812/425-1171 Fax Corbin, KY606/528-3700606/528-9014 Fax Lexington, KY859/259-3456859/254-0783 Fax Stanville, KY606/478-9201606/478-9208 Fax Paducah, KY270/444-8390270/575-4907 Fax Indianapolis, IN317/872-8410317/872-8417 Fax Ft.Wayne, IN260/489-4551260/489-1620 Fax
CONTINENTAL EQUIPMENT CORP.A division of AISwww.aisequip.com3600 N. Grand River Ave.Lansing, MI 48906517/321-8000Fax: 517/321-4191
ROAD MACHINERY & SUPPLIES CO.www.rmsequipment.com5633 W Hwy 13Savage MN 55378952/895-9595800/888-9515Duluth, MN 218/727-8671800/888-9535Virginia MN218/741-9011800/752-4304Des Moines IA218/741-9011800/555-1445Sioux City IA712/252-0538800/633-9104Cedar Rapids IA319/363-9655800/616-6615Milan, IL309/787-1742800/633-9114
ROAD BUILDERSMACHINERY & SUPPLY CO., INC.1001 S. 7th St. TrafficwayKansas City, KS 66105913/371-3822913/371-3870 FaxOmaha, NE402/331-9200Lincoln, NE402/325-0447Grand Island, NE308/384-2620
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 71
www.komatsuamerica.com
LOADERSFrom Komatsu - The Loader Experts
.
.komatsuamerica.comwww.komatsuamerica.com
ROLAND MACHINERY CO.www.rolandmachinery.com816 N. Dirksen Parkway,Springfield, IL 62702217/789-7711Bolingbrook, IL630/739-7474Carterville, IL618/985-3399Marengo, IL815/923-4966Portage, IN219/764-8080Escanaba, MI906/786-6920906/786-5813 Fax Bridgeton, MO314/291-1330Cape Girardeau, MO573/334-5252Columbia, MO573/814-0083Palmyra, MO573/769-2056DePere, WI920/532-0165920/532-0526 Fax DeForest, WI608/842-4151608/842-4193 Fax Eau Claire, WI715/874-5400715/874-5401 Fax Franksville WI 262/835-2710262/835-2844 Fax Schofield, WI715/355-9898715/241-0044 Fax
GENERAL EQUIPMENT & SUPPLIESwww.genequip.com4300 W Main AveFargo ND 58103800/437-2924701/364-2190 Fax 905 20th Avenue SEMinot ND 58072800/825-04792300 Vermont AvenueBismarck ND 58504800/279-4437
Page 72 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Previous Phase Involved Upgrading Energy Efficient SystemBreckinridge Speed, a prominentLouisville businessman and phi-lanthropist. It is currently closedfor the construction project.“The new 60,000-square-foot
North Building will help create oneof the finest experiential art muse-ums in the country and will doublethe overall square footage andnearly triple the gallery space fromthe existing wing,” according tothe Facebook page. The expansionwill create a state-of-the-art spacefor larger special exhibitions, newcontemporary art galleries, a fami-ly education welcome center,indoor/outdoor café, museumshop, and a multifunctional pavil-ion for performances, lectures andentertaining. Additionally, the newElizabeth P. and Frederick K.Cressman Art Park and publicPiazza will be created for the dis-play of sculpture that will engageUniversity of Louisville studentsand faculty and museum visitors.” Wilhelm is the construction
manager for the Speed ArtMuseum expansion and renova-tion projects. The North and Southbuildings are both structural steeland concrete framed buildingswith exterior curtain wall andmetal panel enclosure systems.Both are designed to have newmuseum gallery space and publicareas for gatherings. Additionally,the South building will house a150-seat theater featuring 16mm,35mm, and digital film. The proj-ect also includes renovation of theinterior building spaces still underdesign. Previously completed phases
include the enabling project, whichinvolved installation of an under-
ground detention system, and thecentral utility building (CUB) anddecommissioning of existing sys-tems project, which involved anew utility building constructed toupgrade to cost-saving energy effi-cient systems for the existing andnew buildings. “This is a phased project, so
scheduling and contractorsequencing and coordination is ofutmost importance and concern,”said Grosvenor. “Limited accessand material laydown compound-ed by local utility work being com-pleted in conjunction with ourproject create a challenge.” Grosvenor noted that a unique
aspect of the project is the use ofarchitectural board formed con-crete walls that have not been usedin that area before.“The curtainwall has integrated
AESS (architectural exposed struc-tural steel) structural steel that sup-ports both the curtainwall and inte-rior grand stair case,” he said.“Special frit glass is incorporatedas light screening in lieu of win-dow treatment. The building is sur-rounded by a courtyard water fea-ture with black granite reflectingpools.”Major subcontractors include
ABG Caulking & Waterproofingof Morristown Inc., Morrristown,Tenn., for interior caulk;Architectural Glass & Metal Co.,Indianapolis, Ind., for curtainwalland glass; Beaty Construction Inc.,Boggstown, Ind., for earth reten-tion; Booms Stone Company,Redford, Mich., for the water fea-ture; Brown & Kubican PSC,Lexington, Ky., structural engi-neer; wHY Architecture, Culver
City, Cal.; Clark Nickles Inc.,Charlestown, Ind., for demolition,excavation, and site utilities;Cunningham Door & Window,Louisville, Ky., for overheaddoors; and Division Seven Inc.,Indianapolis, Ind., for waterproof-ing and firestopping.Executive Residential Elevator
LLC, dba Executive Elevator,Louisville, for elevators; F.A.Wilhelm Construction Co. Inc.,Indianapolis, for concrete;Henderson Services LLC,Louisville, for electrical; Howell &Howell Contractors Inc.,Louisville, for painting;Independent Piping Inc.,Sellerburg, Ind., for mechanical /HVAC; John L. CarmanAssociates, Lexington, Ky., civilengineer; and K. Norman BerryAssociates Architects, Louisville,architect.Kerr-Greulich Engineers Inc.,
Louisville, engineers; MartinFlooring Co. Inc., Louisville, for
wood flooring; MG McGrath Inc.,Maplewood, Minn., for metal pan-els; Midland Electric Company,Louisville, for electrical; MidwestSprinkler Corporation, Louisville,for fire protection; ParcoConstructors Group LLC,Louisville, for general trades;Poynter Sheet Metal,Bloomington, Ind., for HVAC(dry); PPMI Firestop Inc.,Greenfield, Ind., for firestopping;Rosa Mosaic & Tile Company,Louisville, for hard flooring; StoneCity Ironworks Inc., Bedford, Ind.,for structural steel; TerraconConsultants Inc., Louisville, forspecial inspections; and WalkerMechanical Contractors Inc.,Louisville, for plumbing andHVAC (wet).Major equipment used on the
job includes a Caterpillar 330Bhydraulic excavator, a Link-Belt460LX hydraulic excavator, aGenie S-50 personnel lift, a Lull644B, a Caterpillar 235 hydraulic
excavator, a Case backhoe 590,and a Cat 304 mini-excavator. While the museum was closed
for a renovation project in 1996, abequest of more than $50 millionwas given by Alice Speed Stoll,granddaughter of JamesBreckinridge Speed. According tothe museum’s Web site, thebequest marks one of the largestgiven to any art museum and sig-nificantly increased the Speed’sendowment, ranking it among thetop 25 in the United States. “Since reopening in November
1997, the Speed has dazzled theregion with exciting traveling exhi-bitions, new acquisitions to thepermanent collection, and a newparking garage,” the Web site said.“The museum is supported entirelyby donations, endowments, grants,ticket sales, and memberships. Thefocus of the collection is Westernart, from antiquity to the presentday. Holdings of paintings fromthe Netherlands, French and Italianworks, and contemporary art areparticularly strong, with sculptureprominent throughout.Representative artists includeRembrandt van Rijn, Peter PaulRubens, Giovanni Tiepolo, HenryMoore, Thomas Gainsborough,Claude Monet, Pablo Picasso, andcontemporary artists Frank Stella,Helen Frankenthaler, Alice Neel,Petah Coyne, Yinka Shonibare,Vito Acconci, and Juan Munoz.”
(This story also can be found onConstruction Equipment Guide’sWeb site at www.constructionequip-mentguide.com.) CEG
The North and South buildings are both structural steel and con-crete framed buildings with exterior curtain wall and metal panelenclosure systems. Both are designed to have new museumgallery space and public areas for gatherings.
The expansion will create a state-of-the-art space forlarger special exhibitions, new contemporary art gal-leries, a family education welcome center, indoor/out-door café, museum shop, and a multifunctional pavil-ion for performances, lectures and entertaining.
The South building will house a 150-seat theater fea-turing 16mm, 35mm, and digital film. The project alsoincludes renovation of the interior building spaces stillunder design.
Construction began in July 2013 and is expected to becomplete in the fall of 2015.
MUSEUM from page 1
Without a doubt, one of the biggest obsta-cles facing business today is the rampantinstability of fuel costs. Prices, it seems, risewithout warning, stabilize, drop, and thenbegin their unexplained rise all over again —but from a new, higher plateau than before.Companies for which fuel usage is a majorcomponent of their operating costs are beingforced to find new ways to cope with thismadness or risk literally being priced out ofbusiness. Not one to be forced into a corner of any
kind, Warren Kappen, co-owner of KappenTree Service, looked at the mulch facet of hisoperation and identified changes he couldmake to reduce fuel consumption and theimpact it had on his bot-tom line. He found it byreplacing several of thediesel-powered compo-nents used to grind, screenand color material to cre-ate high-quality mulchwith electric-poweredunits. Doing so resulted ina reduction in power costsfor that part of the busi-ness of more than 90 per-cent — and an ability tofinally loosen the stran-glehold such costs had onhis business.
Feeling the PinchBased out of Cass City,
Mich., Kappen TreeService specializes in both commercial andresidential tree care, but has really estab-lished itself doing line clearing for many ofMichigan’s larger utility companies. Debrisfrom those projects is collected at variousstaging sites throughout the state and thenbrought back to a processing facility inMarlette to be processed into mulch. It isthere, according to Warren Kappen, that thereal effect of rising fuels costs was felt.“At any given time, we have about 70
trucks out on the road, clearing for the utili-ties and generating wood waste,” he said. “Inaddition, we also collect green waste fromsmaller municipalities in the region and havethe general public bringing us clean debris.In the past, everything brought in to the
Marlette site was first runthrough a horizontalgrinder, then screened in atrommel, prior to being fedinto a colorizing unit. Eachone of those machines wasdiesel-powered — thegrinder alone was a 1,000hp unit — so our fuel con-sumption was huge.”Kappen is not prone to
exaggeration. In its previ-ous setup, the 1,000 hp
grinder to which he refers burned about 30gal. of diesel per hour, while a diesel-pow-ered trommel and colorizing machine eachburned another 5 gal. an hour. As fuel costsfluctuated, always settling higher than in thepast, he knew a change, both in his fuelsource and in the way he processed incom-ing material, was needed.
What Not to GrindOne of the first things Kappen realized
was that running all their debris though thegrinder was definitely overkill — and a cost-ly effort in more ways than one.“The overwhelming bulk of the material
we take in is from our line crews and hasalready been run through one of the portable
Morbark chippers they take with them toeach site,” he said. “Since it is essentiallyalready downsized, we knew that, by recon-figuring the process and screening out mate-rial that could be sent directly to the coloriz-ing unit, we could dramatically reduce theneed for grinding. In addition, grindingmaterial that was already downsized out inthe field was generating huge volumes offines for us — material that was unnecessar-ily wasting both colorant and water. So itwas simple: reduce the volume of fines, andwe reduce that waste.”The best way they found to achieve that
was by adding a dual-deck screen in advanceof any grinding effort. In this way, all theideal-sized material — such as that comingin from the line crews — could be screenedout and sent directly for colorizing, whileoversized material could be sent to thegrinder for further downsizing. Fines alsocould be segregated out and set aside forsubsequent use.
Diesel’s Wild RideWith a solid approach in mind, Kappen
and his team started researching electricpower as a viable alternative to diesel. Thatwork included looking at historical prices foreach fuel source, determining the costs asso-
ciated with making the switch to electric,and researching manufacturers who couldbest meet their needs.“We looked at how electric power had
trended over the last 20 years or so versus thesame period for diesel and saw that therewas a lot more stability in the electric mar-ket,” he said. “Diesel has spiked as high as$5 a gallon in the past and even for largercompanies like ours, it’s tough to adjust tothat kind of fluctuation; electric just seemedthe right way to go.”He added that a long-standing relationship
with Morbark, evident in the fleet of morethan 75 orange machines they currently run,led them to begin talks with the local manu-facturer about both the grinder and the shak-er screen in electric configurations. Fromthere, they moved on to looking for an elec-tric colorizing unit to complement the oper-ation.
Savings AboundThe net result of their efforts is a modern
wood waste processing facility, the center-piece of which is the trio of electric screener,grinder and colorizing unit. Fast and effi-cient, material is taken directly from yardpiles and placed into a load hopper whichfeeds the Morbark 7 by 18 dual-deck screen(the top deck is 1 ½-in., the bottom is 5/8-in.). Everything that comes off the screeneras acceptable goes directly to the coloringmachine, while rejects or “overs” are sentback back to the grinder for reprocessing.The grinder itself, a Morbark 3800 WoodHog, features a pair of 300 hp electricmotors to run the mill and one 100 hp elec-tric motor to power the hydraulics. “The savings are the real deal in this, and
they are evident in so many areas,” saidKappen. “For one, because the grinder willonly be handling the overs that come off thescreener and our incoming material hasalready been chipped, the wear on the unit isonly going to be a fraction of what it was inthe past. Those savings are compounded bythe fact that the bulk of the work is beingdone by the screening unit, which can be runfor 1/10 the cost of the grinder. And thewhole screening/grinding/coloring operationis much quieter than anything else at the site
Kappen Tree Service Makes Fuel Efficient Switchover
Debris from projects is brought to a processing facility to beprocessed into mulch.
Pages 73-87
Crushing, Screening & Recycling SectionFor more information on crushing, screening and recycling equipment, visit CEG's Web site at www.constructionequipmentguide.com.
Kappen Tree Service uses aMorbark 3800 wood hog.
see GREEN page 84
Page 74 • August 17, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
I-100 Impact Crusher Increases SpeedThe Terex Finlay I-100 direct drive
Ø34 by 34 in. (ø860 by 860 mm) hor-izontal impact crusher with variablespeed gives operators increased levelsof production in both recycling andquarrying applications. The Terex Finlay I-100 features an
advanced electronic control systemthat monitors and controls the speed ofthe rotor and regulates the heavy dutyvibrating feeder (VGF) with integrat-ed pre-screen to maintain a consistentfeed of material into the impact cham-ber for optimal crushing conditions.Material from the integrated pre-screen can be diverted to a stock pilevia the optional by-pass conveyor, orit may join the crushed product on themain belt. The standard hopper capac-ity is 3.01 cu. yds. (2.3 cu m). With tracked mobility this machine
is capable of working in the mostdemanding of environments and fea-tures a rapid set-up time, according tothe manufacturer. The machine features a heavy duty
chassis, with convenient access pointsand ladders to all service areas. Startup time for the Terex Finlay I-
100 is minimal, with the machineready for crushing in less than 5 min-utes. The heavy duty crawler tracks,and optional radio remote control unit,make onsite mobility very easy.Additional benefits include
hydraulic assist apron adjustment. Key Features:• Hydraulic apron setting assist pro-
vides convenient and efficient adjust-ment of the aprons.• Hydraulic overload protection
provides instant protection foruncrushable material.• Heavy duty vibrating feeder
(VGF) with integrated prescreen helpsby-pass dirty fines.• Direct drive crusher chamber with
independent belt tensioner allowingfor rapid adjustment.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
The Terex Finlay I-100 features an advanced electronic control systemthat monitors and controls the speed of the rotor and regulates the heavyduty vibrating feeder with integrated pre-screen to maintain a consistentfeed of material into the impact chamber for optimal crushing conditions.
Morbark Inc.’sredesigned 40/36whole treemicrochipper is thelatest in designenhancements. The 40/36 whole
tree drum chipperwas first introducedin 2008 as a compact,affordable and pro-ductive biomasschipper. The modelwas improved by theaddition of theAdvantage 3 high performance chip-ping drum in 2011, which improvedchip quality. The latest model includesan enhanced drum set with 16 knivesutilizing standard hardware, an opera-tor-friendly slide-in forestry grate sys-tem to reduce oversized chips and amechanically driven chip acceleratorto fully load vans with the micro-chips.“With new biomass plants being
built in the United States and the rapid
expansion of wood pellet exports toEurope to meet the European Union’smandate that 20 percent of its energycome from renewable sources by2020, our customers need a cost-effec-tive system for making microchips,”said John Foote, Morbark VP of salesand marketing. “This newly re-engi-neered 40/36 microchipper is the solu-tion. We are able to produce a farsuperior product, producing 95 to 98percent acceptable micro-chips at vol-
umes of more than70 tons per hour.” With an average
fuel consumption of2.25 tons (2 t) ofmicro-chips pro-duced per gallon offuel used, theMorbark 40/36MicroChipper allowsowners to reducecosts and maximizeprofits. In customertests, 95 to 98 percentof the micro-chips
produced passed through a ½ in. (1.3cm) grate, and 72 to 74 percent passedthrough a ¼ in. (.6 cm) grate. Thesemicro-chips are vital for pellet mills,eliminating the need to regrind thewood fiber prior to pelletizing. For more information, visit
www.morbark.com. (This story also can be found on
Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)
Morbark’s Newest 40/36 Chipper IncludesEnhanced Drum Set With 16 Knives
The latest model includes an enhanced drum set with 16 knives uti-lizing standard hardware, an operator-friendly slide-in forestrygrate system to reduce oversized chips and a mechanically drivenchip accelerator to fully load vans with the micro-chips.
www.ohiocat.com
www.altorfer.com
2600 6th Street S.W.Cedar Rapids, IA 52404
319-365-0551Fax: 319-365-5639
4712 Buckeye St.Davenport, IA 52802
563-324-1935Fax: 563-324-2409
#1 Capitol Dr.East Peoria, IL 61611
304-694-1234Fax: 309-694-41484200 Rodger StreetSpringfield, IL 62705
217-529-5541Fax: 217-529-00201519 W. Kenyon Rd.Urbana, IL 61801
217-539-1671Fax: 217-359-63103520 Moberly Ave.Hannibal, MO 63401
573-221-8600Fax: 573-221-7187701 Highway 24WMoberly, MO 65270
660-263-8200Fax: 660-263-8203
Cleveland, OH440-526-6200800-837-6200
Fax: 440-526-9513Cadiz, OH
740-942-4626800-837-6204
Fax: 740-942-4029Canton, OH
330-478-6525800-837-6207
Fax: 330-478-6529Cincinnati, OH513-771-0515888-332-4658
Fax: 513-672-7658Columbus, OH614-878-2287888-441-4658
Fax: 614-851-5015
Toledo, (Perrysburg) OH419-874-7975888-339-4658
Fax: 419-873-8255Troy, OH
937-335-7660888-330-4658
Fax: 937-335-6447Youngstown, OH330-530-9010800-837-6203
Fax: 330-530-9102Zanesville, OH740-453-0563800-837-6205
Fax: 740-452-3605Richwood, KY859-372-4665888-446-4658
Fax: 740-452-3605
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 17, 2013 • Page 75
Innovative American made no compromise
Join the revolution715-395-6060 www.exodusmachinesinc.com superior, wisconsin
BIG. Bad. fast. strong.
AVAILABLE.
The MX457130K lbs. 300 hp. 13,430lb@60’. 63’ 5” reach.
www.macallister.com7515 East 30th St.
Indianapolis, IN 46219800-382-1896Fort Wayne, IN800-944-0847South Bend
800-685-9849Lafayette, IN
800-283-4231Washington, IN800-932-5120Terre Haute, IN800-273-5650
www.fabco.com11200 W. Silver Spring Rd.
Milwaukee, WI 53225414-461-9100
Fax: 414-461-8899Madison, WI
608-271-6200LaCrosse, WI608-783-4891Eau Claire, WI715-832-6647Wausau, WI
715-359-6220Green Bay, WI920-498-8000Superior, WI
715-398-9696Marquette, MI906-475-4191
www.whayne.com1400 Cecil Ave. • Louisville, KY
502-774-4441Ashland, KY
606-928-3444Bowling Green, KY
270-843-3275Corbin, KY
606-528-3140Dry Ridge, KY859-823-1500Evansville, IN812-425-4651Hazard, KY
606-439-4040Lexington, KY859-254-2756Paducah, KY
270-443-3631Pikeville, KY
606-437-6265
Page 76 • August 17, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
GreyStone Aggre-Spec Classifying Systems, ControllersAggre-Spec sand classifying systems, manufactured by
Columbus, Neb.-based GreyStone Inc., produce up to threeproducts, including two spec products, from natural or man-ufactured sand blends. Aggre-Spec classifying systemsallow producers to scalp excess water, reject excess materi-al, separate and size sand particles and re-blend up to twoindustry-standard spec products simultaneously. Urethanedischarge valves and seats are self-aligning to keep valvescentered for maximum flow and long life. Discharge bootsalso are urethane, with the optimum angle for maximumflow and reduced wear of the flume’s abrasion-resistant linedfloor. GreyStone offers a full line of Aggre-Spec classifyingsystems, as well as controls, including:
Stationary Aggre-Spec tanks,with 10 classifier models,ranging in size from 8 by 20-ft. (2.4 by 6 m) to 12 by 48-ft.(3.6 by 14.6 m). Stationary structures offer from six to 11classifying stations with three cells, capable of producing upto three products at one time.
Semi-Portable Aggre-Spec classifying systems, featur-ing a modular, low-profile construction and stack-up designfor quick installation. This line includes 18 classifier models,ranging in size from 8 by 24-ft. (2.4 by 7.3 m) to 12 by 48-ft. (3.6 by 14.6 m). Semi-portable structures offer from sevento 11 classifying stations and produce up to 820 tph (744 t).
Portable Aggre-Spec classifying systems, featuring alow-profile design for quick transport and installation. Thisline includes 8 classifier models, ranging in size from 8 by24-ft. (2.4 by 7.3 m) to 10 by 40-ft. (3 by 12 m). Portablestructures offer from seven to 11 classifying sta-tions and produce up to 350 tph (318 t).
GreyStone Aggre-Spec control systems offera Windows-based control system that allows pro-ducers to make an unlimited number of recipes oftwo products. Aggre-Spec control systems holdto tight product specifications and warn opera-tors of potential out-of-spec product conditions.
The Aggre-Spec V6 re-blending system— GreyStone’s most advanced unit — allowsoperators to view information on one screenthat used to require multiple screen views.This information can easily beaccessed from a laptop, allow-ing the operator freedom ofmovement and control from aremote location.In addition, the Aggre-Spec
V6:• Increases production by
up to 15 percent• Re-blends up to three
spec products, including two spec products simultaneously,using single or twin tank controls• Offers simple product spec changes and multi-tasking
capabilities with three-method Windows-based programs• Stockpile analysis compares finished product against
expected products and input settings• Report module collects data, including FM, yield, feed
gradation and output gradation, and stores in spreadsheet for-mat for flexible reporting• Retrofits to more than 30 different classifier models, with
up to 11 stationsFor more information, call 888/346-WASH or visit
www.greystoneinc.com.(This story also can be found on Construction Equipment
Guide’s Web site at www.constructionequipmentguide.com.)
GreyStone’s portable classifying system.
GreyStone’s stationary classifying system.
The Aggre-Spec VGT controller.
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 17, 2013 • Page 77
EVO. A NEW CLASS OF MACHINERY.
MR 110 EVO MR 130 EVO
www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES
Springfield, Illinois816 N Dirksen Parkway
Springfield, IL 62702Phone: 217-789-7711
Bolingbrook, Illinois220 East Frontage RoadBolingbrook, IL 60440Phone: 630-739-7474
Carterville, Illinois1505 Donna Drive
Carterville, IL 62918Phone: 618-985-3399
Marengo, Illinois18210 Beck Road
Marengo, IL 60152Phone: 815-923-4966
Portage, Indiana6450 Melton RoadPortage, IN 46368
Phone: 219-764-8080
Escanaba, Michigan2600 S Lincoln RoadEscanaba, MI 49829
Phone: 906-786-6920
DeForest, Wisconsin604 Stokely Road
DeForest, WI 53532Phone: 608-842-4151
DePere, Wisconsin3275 French RoadDePere, WI 54115
Phone: 920-532-0165
Eau Claire, Wisconsin7417 Margaret LaneEau Claire, WI 54703Phone: 715-874-5400
Franksville, Wisconsin2916 N Sylvania AveFranksville, WI 53126Phone: 262-835-2710
Schofield, Wisconsin9808 Weston AvenueSchofield, WI 54476
Phone: 715-355-9898
Bridgeton, Missouri4670 Crossroads
Industrial Dr.Bridgeton, MO 63044Phone: 314-291-1330
Cape Girardeau, Missouri
3364 Percy DriveCape Girardeau, MO
63702Phone: 573-334-5252
Columbia, Missouri4110 I-70 Drive SE
Columbia, MO 65201Phone: 573-814-0083
Palmyra, Missouri701 Industrial DrivePalmyra, MO 63461
Phone: 573-769-2056
Page 78 • August 17, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Announcing a Tough New Combination in Iowa, Illinois & Nebraskawith Sales, Service, Parts & Rental Provided By
For Tough Crushing & Screening SolutionsCall 319-857-4045
www.rtlequipment.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 17, 2013 • Page 79
1-800-952-0178
worldwide network of authorized Bandit dealers.processing equipment is a
s toughest,y’The industr
worldwide network of authorized Bandit dealers.vailable through the processing equipment is a
longest lasting woo s toughest,
ale th
od
boost your operation’ or rec, grinder r,,chipper,
Contact yours today and see how a Bandit
SMALL EQUIPMENT DEALERS
s bottom line.boost your operation’ler can help yc or rec
Contact yours today and see how a Bandit
USH CHIPPERS,(BRSMALL EQUIPMENT DEALERS
dit
AC) ARBORVVAC) STUMP GRINDERS,USH CHIPPERS,
1-800-952-0178
LARGE EQUIPMENT DEALERS
TREE CHIPPERS,WHOLE (BEASTT,LARGE EQUIPMENT DEALERS
Y MOWERS) FORESTRTREE CHIPPERS,
For large equipment inquiries in OH,
630-293-0606 ILgo,est ChicaW
708-596-8050 ILMokena,
ax: 847-678-3587F847-678-3633
IL 60176ark,Schiller P River Rd.5050 N.
M IA, , MN, IL, , IA, Y, KY,, IL, Y IL, Y, IL, IN, , KYFor large equipment inquiries in OH,
Little Canada,t.comtlasbobca.awww
630-553-0150 ILorkville,YYorkville,
847-526-4522 ILauconda,W
or if your region is not represented abo WI and MI, , or if your region is not represented abo MN,
877-331-0295651-407-3727
MN 55117Little Canada,3101 Spruce St.
877-262-2284952-894-0894
MN 55337Burnsville, Hwy 13.W1800
.tristawww
866-268-2418715-531-0801
Hudson,745 Exchange Drive
ve, or if your region is not represented abo
t.comtebobca.trista
866-268-2418715-531-0801
54016 WI Hudson,745 Exchange Drive
please call us or visit us online for assistance.ve,, please call us or visit us online for assistance.
304-534-5454 WVairmont,F
304-204-1818 WVLanes,Cross
304-255-1525 WV,ver,Bea
304-226-3299 WVwen,Co
please call us or visit us online for assistance.
lec1.com.www
304-204-1818 OHMarietta,
304-255-1525 WVPikeville,
304-226-3299 WVNorton,5050 N. River Rd.
Schiller Park, IL 60176847-678-3633
Fax: 847-678-3587
Mokena, IL708-596-8050
West Chicago, IL630-293-0606
Wauconda, IL847-526-4255
Yorkville, IL630-553-0150
www.atlasbobcat.com
1800 W. Hwy 13Burnsville, MN 55337
952-894-0894877-262-2284
3101 Spruce St.Little Canada, MN 55117
651-407-3727877-331-0295
745 Exchange DriveHudson, WI 54016
715-531-0801866-268-2418
www.tristatebobcat.com
Cowen, WV304-226-3299
Beaver, WV304-255-1525
Cross Lanes, WV304-204-1818
Fairmont, WV304-534-5454
Norton, WV304-636-6421
Pikeville, KY606-432-0321
www.lec1.com
Page 80 • August 17, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
For the First Time...
W.S. Tyler Pro-Deck Screen ApproachNow Includes Modular Screen MediaW.S. Tyler has expanded its consul-
tative Pro-Deck approach to vibratingscreens using modular screen media.For the first time, customers are able tobenefit from the flexibility of modularpanels in combination with the Pro-Deck approach for extended screen lifeand higher production rates. “Many mine operators and produc-
ers prefer the wear life of modularscreen media, but think that this comeswith a high sacrifice in open area. WithPro-Deck, different style screen panelsare blended in a way that both wear lifeand open area are optimized,” saidDarcy Bishop, manager of W.S. Tyler’smedia division. The Pro-Deck approach is a five-
step process that implements W.S.Tyler’s vibration analysis and modifi-cation strategy to professionally blendmultiple types of screen media on a sin-gle deck. Traditionally, processingoperations have used the same screenmedia on an entire deck of the vibratingscreen. But after extensive research andyears of experience, W.S. Tyler con-cluded that a non-traditional approachof incorporating more than one type ofscreen media extends the life of thescreen media while also enhancing effi-ciency. Additionally, the Pro-Deckapproach helps eliminate commonscreening problems such as blinding,pegging and premature wear that causeunscheduled downtime, according tothe manufacturer.The Tyler Pro-Deck process begins
with an onsite visit to the vibratingscreen by a Pro-Deck specialist. Usingits self-developed vibration analysistool, W.S. Tyler’s screening expertsensure that the machine is workingwithin the operational parameters spe-cific to the application requirements.Based on screen performance and thewear experienced on the individualsections and deck, a recommendationfor screen media modification is made.Upon implementation of the newscreen media, the results are measuredand documented before focusing on thenext section. This process continuesuntil all recommendations are imple-mented and the customer’s product
quality is positively enhanced. In addi-tion, it allows the customer to continu-ously evaluate the new performanceand wear advantages.“We recommend a Pro-Deck setup
for any operator or producer usingmodular panels. Pro-Deck offers asolution for virtually every situation,regardless of whether the user is expe-riencing blinding, contamination orexcessive wear. Pro-Deck can evenimprove situations in which bothscreening results and wear are deemedsatisfactory,” said Bishop. “The secretto Pro-Deck’s success lies in under-standing that the vibrating screen andthe screen media are an integral system.You need to synchronize both in orderto achieve optimal results.” W.S. Tyler Modular screen media is
generally customized to every applica-tion and often manufactured in 1x1,1x2, and 1x4 sized panels. Formulatedwith rubber, polyurethane or a wire andpolyurethane hybrid blend, these pan-els are known for high wear life incomparison to tensioned wire clothscreens. The modular panels are light-weight, easy to handle, and designed tobe snapped in or installed with a built-in pin and sleeve or groove system,making screen media changeouts quick
and simple. Additionally, a single per-son can perform changeouts safely,according to the manufacturer. W.S. Tyler offers an extensive line of
screen media products to build the rightPro-Deck for their customers’ applica-tions. “Our Ty-Wire hybrid panels deliver
amazing results as they combine theopen area of woven wire with the wearcharacteristics of polyurethane. Ty-Wire has become an integral buildingblock in designing customized Pro-Decks for our customers,” said Bishop.Because of their high durability and
the capacity to change out only smallportions of the deck, modular panelsare ideal for high impact areas. Whenused in these situations, particularly aspart of a Pro-Deck setup, modular pan-els are cost effective. Although the pan-els have a higher initial cost per squarefoot, their long-term cost is lowerbecause operators only have to changeout the worn portions of the screenrather than changing out an entire tradi-tional tensioned wire cloth screen.
(This story also can be found onConstruction Equipment Guide’s Website at www.constructionequipment-guide.com.)
W.S. Tyler has expanded its consultative Pro-Deck approach to vibratingscreens using modular screen media.
Brandeis Machinery & Supply Co.www.brandeismachinery.com
Evansville, IN • (812) 425-4491Ft. Wayne, IN • (260) 489- 4551Indianapolis, IN • (317) 872-8410Corbin, KY • (606) 528-3700
Lexington, KY • (859) 259-3456Louisville, KY • (502) 491-4000Paducah, KY • (270) 444-8390Stanville, KY • (606) 478-9201
28775 Beck Rd.Wixom, MI 48393(248) 449-6700
Fax: (248) 449-6701www.altaequipment.com
2470 W. Columbia Ave.Battle Creek, MI 49015
(269) 965-1269Fax: (269) 965-1881
8840 Byron Commerce SWByron Center, MI 49315
(616) 878-7450Fax: (616) 878-7650
4716 Talono Ct. S.E.Kentwood, MI 49512
(616) 698-2960Fax: (616) 698-2901
6327 Jomar Ct.Lansing, MI 48917(517) 272-5033
Fax: (517) 272-7257
5920 Grand Haven Rd.Muskegon, MI 49441
(231) 798-9754Fax: (231) 798-9387
28855 Smith Rd.Romulus, MI 48174(734) 641-8238
Fax: (734) 641-8334
1524 Champagne Dr.Saginaw, MI 48604(989) 752-9400
Fax: (989) 752-9834
7500 E. 15 Mile Rd.Sterling Hts., MI 48312
(586) 977-6000Fax: (586) 977-6099
476 US 31 SouthTraverse, MI 49685(231) 943-3700
Fax: (231) 943-8110
56195 Pontiac TrailNew Hudson, MI 48165
(248) 356-5200Fax: (248) 356-2029
9433 Riley St.Zeeland, MI 49464(616) 748-4108
Fax: (616) 748-4120
Alta Equipment Company
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 17, 2013 • Page 81
SENNEBOGEN green line material handling machines make your competitors “green with envy”SENNEBOGEN green line material handling machines make your competitors “green with envy”
High Productivity – Low Operating Costs
Muskegon, MI231-798-8754
Kentwood, MI616-698-2960
Battle Creek, MI269-965-1269
New Hudson, MI248-356-5200
Romulus, MI734-641-8238
Saginaw, MI989-752-9400
Sterling Hts, MI586-977-6000
Traverse, MI231-943-3700
Zeeland, MI616-748-4108
Lansing, MI517-272-5033
Wixom, MI (Cons. Division)248-356-5200
Byron Center, MI616-878-7450
Louisville, KY 502-491-4000
Evansville, IN812-425-4491
Corbin, KY606-528-3700
Lexington, KY859-259-3456
Stanville, KY606-478-9201
Paducah, KY270-444-8390
Indianapolis, IN317-872-8410
Ft.Wayne, IN260-489-4551
HOWELL TRACTOR &EQUIPMENT
LLCwww.howelltractor.com
Gary,IN800-852-8816
Peru, IL800-342-6072
GIBSON MACHINERY
LLCwww.gibson
machinery.com
Oakwood Village,OH
440-439-4000
Pittsburgh, PA 724-695-5000
Carterville, IL618/985-3399
Bridgeton, MO314-291-1330
Columbia, MO573-814-0083
Cape Girardeau, MO573-334-5252
Palmyra, MO573-769-2056
Franksville, WI262-835-2710
DePere, WI920-532-0165
DeForest, WI608-842-4151
Eau Claire, WI715-874-5400
Schofield, WI715-355-9898
Escanaba, MI906-786-6920
THE VICTOR L.PHILLIPS CO.
www.vlpco.com
Kansas City, MO 800-878-9290
Joplin, MO800-878-8223
Brookline Station,MO
800-955-2729
Wichita, KS800-878-3346
Topeka, KS800-878-4345
Garden City, KS 800-511-1435
Savage, MN 800-888-9515
Des Moines, IA 800-555-1445
Cedar Rapids, IA 800-616-6615
Sioux City, IA 800-633-9104
Milan, IL 800-633-9114
Duluth, MN 800-888-9535
Virginia, MN 800-752-4304
Bismark, ND800-247-1282
Dickinson, ND888-418-2873
Fargo, ND800-342-4330
Omaha, NE866-733-1100
Minot, ND701-852-3188
Rapid City, SD888-388-0266
Sioux Falls, SD800-262-5373
Williston, ND877-570-4635
Lincoln, NE866-801-6261
ALTA EQUIPMENT COMPANYwww.altaconstructionequipment.com
BRANDEIS MACHINERY & SUPPLY COMPANY
www.brandeismachinery.com
ROLAND MACHINERY CO.www.rolandmachinery.com
ROAD MACHINERY & SUPPLIES CO.
www.rmsequipment.com
TITAN MACHINERYwww.titanmachinery.com
Page 82 • August 17, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
New 2013 Cedarapids MVP380Xclosed circuit plant on a Masabaquad chassis.
Run-on jacks, 6x20 triple deck screen, crossconveyor. Available July 1, 2013.
Price without switchgear: $749,694.00
2005 Powerscreen 600portable screen plant.
Three hydraulic folding conveyors,4x8 twin deck screen, 1645 hours.
Price: $89,550.00
2012 Portablewash plant rentalreturn.
Twin 36 Eagle over a6x16 Cedarapidstriple-deck screen.
Price withoutswitchgear: $179,000.00
2001 Cedarapids54II cone crusherwith new bonnetassembly/V-seat.
Comes with motorsheave, ready tocrush.
Price: $192,000.00
New 2012Terex RoadBuildingMS2 pickupmachine.
Price:$132,500.00
Rent it for:$8500.00/month
Kleemann MS 16 Z Mobile Screen PlantIncludes 5’ x 14’ double deck variable slope incline screen, three (3) product conveyors, 100 hp diesel engine
Bramco-MPS is THE single sourcefor AGGREGATE and PROCESSING EQUIPMENT.
Website: bramco-mps.com
• Material Processing plant design • Fabrication • Installation • Logistical SupportP.O. Box 6588 • 335 Saltwell Drive •Shepherdsville, KY 40165
Toll Free: 877-538-3221Phone: 502-543-3746 Fax: 502-543-3716
E-Mail: [email protected]
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 17, 2013 • Page 83
Lokotrack LT1213 impactor plant
Lokotrack LT1213
Top capacity impactor plantMore versatility,more opportunities for you.
op
otrack LokLy and unifcapacit
e lookr’ouf yI
capTTop capacit
or plant frty impacimarT1213 prk L LT1213 pr
, taktsoducm end pror and unif foror a combination of ing f o e look
ty impacop capacitokL
. etsoom Mor plant fr
e a look at the , takeased crushing or a combination of incr
tor plantT1213otrack L LT1213ok
T
E-mail: minerals
or tibutdistrabout the v
offorop pertmineral-based demolition debr
ith a single LWmethod that also incr
T121 he L LT1213 offT
.com.nam@metsoE-mail: minerals
.yodaor tour local Mt yT1213, contacersatile L LT1213, contacabout the v
t qualitoducmance and end pror, all while maintaining ismineral-based demolition debr
ou can crush both rT1213, y ngle L LT1213, your business opporeases ymethod that also incr
e impactivoduce prers a mor13 off fers a mory impac
etso our local Me n moro learTTo lear. yt qualit
, all while maintaining y ock and anou can crush both r
. tunitiesour business opport crushing e impac
.metsowww
om.c.metso
BUTLER MACHINERY CO.www.butlermachinery.com
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
4950 E Highway 12Aberdeen SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
RB SCOTT COMPANY INC.
www.rbscott.com1011 Short St.
Eau Claire, WI 54701715-832-9792
Fax: 715-832-7767
CENTRAL SERVICE &
SUPPLY, INC.www.centralsands.com
4219 E. 50th St.Des Moines, IA 50317
800-247-2400
515-964-8600
Fax: 515-309-0667
PROCESSMACHINERY INC.www.processmachinery.com
1636 Isaac Shelby DriveShelbyville, KY 40065
800-860-1523
860 Kaderly DriveColumbus, OH 43228
866-249-4330
ROAD BUILDERSMACHINERY &
SUPPLY CO., INC.www.roadbuilders
machinery.com
1001 S. 7th St. TrafficwayKansas City, KS 66105
913-371-3822
Fax: 913-371-3870
4115 S. 90th St.Omaha, NE
402-331-9200
5601 Fletcher Ave.Lincoln, NE
402-325-0447
4949 Juergen Rd.Grand Island, NE
308-384-2620
AIS CONSTRUCTION
EQUIPMENTCORP.
3600 N. Grand River Ave.Lansing, MI 48906
517-321-8000
Fax: 517-321-4191
www.aisequip.com
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot Avenue
Lenox, MI 48050586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
Page 84 • August 17, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Electric Saves Thousands— a far cry from what it was in the past. Theicing on the cake for me is the fact that thispart of the operation can now be done by justone man. The loader operator has controlover the whole process — that’s a really nicebenefit.”He added that the colorizing unit they
eventually selected, a Sahara X3 fromColorbiotics, is equally impressive. Rated toproduce colored mulch at a rate of up to 300yds. an hour, it features a sensor that shutsdown the colorizing effort when product hasstopped flowing to it. “They really engineered this machine to
eliminate waste,” said Kappen. “Colorant isexpensive, anywhere from 80 cents to a dol-lar per pound, and it takes about threepounds per yard to get the color we like, sokeeping waste down is key. It is also a fastmachine, capable of giving us eight loads aday — better than 1,000 yards — which willserve us well in our busy season.”
Hard Numbers, Easy to TakeEven though he was confident in the
knowledge he accrued during the researchphase of the switchover, Kappen was stillanxious to see real comparative numbersonce the electric operation had been in use
for a while. Having started this past April, hewas finally able to do so — suffice it to say,he was not disappointed.“With the full diesel setup, our monthly
operating costs for that part were about$24,000,” he said. “We got our first electricbill the other day and were floored to see thatit was only $1,800. Now, granted, there wasa fair amount of outlay getting to this point;costs to get the electric service in place, cap-ital costs for the equipment, and so on. Butwhat we got far exceeded what even wethought we’d see in terms of savings. Inaddition, the product quality is much betternow, we’ve streamlined the whole operation,and there is the obvious reduction in dieselemissions.Kappen said they are really excited about
further growing the mulch side of the busi-ness, adding that the demand for product isdefinitely there. “When you consider that companies are
currently bringing in mulch from as far awayas the Upper Peninsula of the state — about250 miles away — the changes we’ve madehave put us in a great position to be morethan competitive.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
GREEN from page 73
www.superior-ind.com
KING OF THE HILL
At Superior, we’re constantly searching for new ways to use our knowledge of bulk material handling systems to solve challenges and improve production. We’re driven by curiosity, loaded with determi-nation and energized by progress. How can we help you?
Proud partners of General Equipment & Supplies
Fargo, ND4300 Main Ave.Fargo, ND 58103800-437-2924Local: 701-282-2662Fax: 701-364-2190
Sioux Falls, SD3902 N Jessica Ave.Sioux Falls, SD 57104Local: 605-336-9000Fax: 605-336-0073
Bismarck, ND2300 Vermont Ave.Bismarck, ND 58504800-279-4437Local: 701-223-9700Fax: 701-223-4815
Shakopee, MN4600 Valley Industrial Blvd SShakopee, MN 55379800-966-1455Local: 952-224-1500Fax: 952-224-1570
Minot, ND905 20th Ave. SEMinot, ND 58701800-825-0479Local: 701-852-0479Fax: 701-852-1451
Official dealer partner of Superior Industries in North Dakota, South Dakota, Minnesota, Iowa & Nebraska
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 17, 2013 • Page 85
ServingIllinois
Midwest Crushing & Screening
7144 N Harlem Ave.
Chicago, IL 60631
847.271.5027
IndianaPowerscreen Indiana, Inc.
255 N Hetzler Court
Angola, IN 46703
260.665.5816
MichiganPowerscreen of Michigan
7819 West Jefferson
Detroit, MI 48209
www.powerscreenofmichigan.com
260.665.5816
MinnesotaTheco, Inc.
5470 Quam Ave. NE
St. Michael, MN 55376
www.thecoinc.com
800.776.0335
OhioAGGCORP
P.O. Box 219
Westerville, OH 43086
www.aggcorp.net
614.309.6854
Page 86 • August 17, 2013 • www.constructionequipmentguide.com • Recycling Section • Construction Equipment Guide
Solid choice for yourproductivity.
Lokotrack ST3.8 mobile screen
Optimal screening results
ptimal scrO
ing optimal mobiliteroffotrack ST3.8 is a heaokhe LT
m eening rmal scr
op
otrack ST3.8 mobile scrokL
y and �tivitoduc, pry timal mobilitra deck mobile s-owy tduty-vck ST3.8 is a hea
esultseening reenotrack ST3.8 mobile scr
ehT.ytilibixey and �n eercdeck mobile s
.metsoE-mail: minerals
or tibutdistree sizyield thr
and an optional the ST3.8 is capable of prT. set up
piling and focksteen arge scrlar
ST3.8 is desig
etsso in .com.nam@metso nerals
o .yodaor te s ting yy contace bn morearL. es siz
pti id can be added trdeck vibrating g-ow onal te ST woducing t T3.8 is capable of prg a ors enable quick and easy yevolding side con and f folding side conen ecise scror e�cient and prea f for e�cient and prn ar
esi doror high pned and built f for high p igy and �y
etso our local Mting yoid can be added t
,stcodued end pro sizwors enable quick and easy
d . On-boareeningecise scrahtiw,sbojnoitcu
y
.metsowww
ets om.cso
3402 36th St. SWFargo, ND 58014
701-280-3100
800-726-7475
3630 Miriam Ave.Bismarck, ND 58501
701-223-0890
2803 I-94 BusinessLoop E
Dickinson, ND 58601701-456-1400
1201 S. 46th St.Grand Forks, ND 58201
701-775-4238
1505 Hwy 2, Bypass EMinot, ND 58701
701-852-3508
4950 E Highway 12Aberdeen SD 57401
605-225-6240
3601 Deadwood Ave. NRapid City, SD 57702
605-342-4850
20571 Truck Stop Ave.Pierre, SD 57501
605-224-5400
3201 N. Louise Ave.Sioux Falls, SD 57107
605-336-3010
CENTRAL SERVICE
& SUPPLY, INC.www.centralsands.com
4219 E. 50th St.Des Moines, IA 50317
800-247-2400515-964-8600
Fax: 515-309-0667
3600 N. Grand River Ave.Lansing, MI 48906
517-321-8000
Fax: 517-321-6275
Grand Rapids600 44th Street S.W.
Grand Rapids, MI 49548616-538-2400
Fax: 616-538-0449
Northeast Detroit65809 Gratiot Avenue
Lenox, MI 48050586-727-7502
Fax: 586-727-7311
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
Traverse City8300 M-72 East
Williamsburg, MI 49690231-267-5060
Fax: 231-267-5257
West Detroit, MI56555 Pontiac Trail
New Hudson, MI 48165248-437-8121
800-457-8121
BUTLER MACHINERY CO.www.butlermachinery.com
AIS CONSTRUCTION EQUIPMENT CORP.
www.aisequip.com
Construction Equipment Guide • Recycling Section • www.constructionequipmentguide.com • August 17, 2013 • Page 87
YOUR COMPLETE AGGREGATE SOLUTIONYOUR COMPLETE AGGREGATE SOLUTION GGREGA ATE SOLUTION
3600 North Grand River AvenueLansing, MI 48906
517-321-8000Fax : 517-321-6275
600 44th Street S.W.Grand Rapids, MI 49548
616-538-2400Fax: 616-538-0449
65809 Gratiot AvenueLenox, MI 48050
586-727-7502Fax: 586-727-7311
AIS CONSTRUCTION EQUIPMENT CORPORATION4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989-777-0090
Fax: 989-777-1583
8300 M-72 EastWilliamsburg, MI 49690
231-267-5060Fax: 231-267-5257
56555 Pontiac TrailNew Hudson, MI 48165
248-437-8121800-457-8121
www.aisequip.com
Page 88 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
To view our Business Calendar online, go to www.constructionequipmentguide.com.
AGC ST. LOUIS IF IT’S NEW, IT’S HERE!CONEXPO-CON/AGG will represent an immense unveiling of all the newestequipment, technology and product breakthrough in construction. From earth-shaking big iron to groundbreaking innovations, it’s all assembled in one placeto help you work smarter. CONEXPO-CON/AGG 2014 – If it’s new, it’s here!
CONEXPO – CON/AGG 2014 – if it’s new, it’s here!MARCH 4 thru 8, 2014LAS VEGAS, NEVADA USA
LAS VEGAS CONVENTION CENTER
CONEXPO-CON/AGG 2014 WILL FEATURE:. 2,400 exhibitors showcasing new products and technologies from forevery major construction industry including asphalt, aggregates, concrete,earthmoving, lifting, mining, utilities and more.. Over 130,000 attendees that range from contractors, to dealers & distrib-utors, to service providers, engineers, producers, municipalities, and more. . A comprehensive education program during the five-day exposition withsessions emphasizing industry issues and trends, management and appliedtechnology.
For more information, please contact AGC of St. Louis, 6330 KnoxIndustrial Drive, Suite 200, St. Louis, MO - Phone: 314/781-2356; Fax:314/781-2874.
IOGA, WEST VA (INDEPENDENT OIL & GAS ASSOCIATION)SEPTEMBER 17 thru 19, 2013 - FARM SCIENCE REVIEW.Farm Science Review@OhioStateFSR. If your business is agricultural, our business is you! Please contact Leslie Risch, Program Assistant at 614/292-4278 for more infor-mation on this program.
AGC of Minnesota–Fundraiser Event.Sporting Clays Fundraiser to Benefit Scholarship Event, Monday, August 19th.Join us for the 14th annual Sporting Clays Fundraiser on Monday, August 19,at Minnesota Horse and Hunt Club in Prior Lake. The early bird registrationdeadline is Monday, July 29. For more information on this event, please con-tact Denise Woods, CMP; Communications & Events, Associated GeneralContractors of Minnesota, St. Paul, Minnesota; Direct: 651/796-2186; Cell:612/201-5501; Fax: 651/632-8928; Toll Free: 800/552-7670 or go towww.agcmn.org.
AGC of Minnesota–Fundraiser Event.Sporting Clays Fundraiser to Benefit Scholarship Event, Monday, August19th.Join us for the 14th annual Sporting Clays Fundraiser on Monday, August 19,at Minnesota Horse and Hunt Club in Prior Lake. The early bird registrationdeadline is Monday, July 29. For more information on this event, please con-tact Denise Woods, CMP; Communications & Events, Associated GeneralContractors of Minnesota, St. Paul, Minnesota; Direct: 651/796-2186; Cell:612/201-5501; Fax: 651/632-8928; Toll Free: 800/552-7670 or go towww.agcmn.org.
Minnesota Nursery & Landscape AssociationAmerican Horticultural Therapy Association Annual Conference. September 20, 2013 to September 21, 2013Time: All DayLocation: The Commons Hotel, 615 Washington Ave., SE, Minneapolis, MN Celebrating AHTA’s 40th AnniversaryThis year’s anniversary celebration will feature past AHTA presidents and lumi-naries from the field, as well as a host of international presenters who will dis-cuss their research, practices and the future of horticultural therapy. For moreinformation, please contact the MNLA office phone at 651/633-4987; Toll Free:888/886-6652 or email [email protected]; Fax: 651/633-4986; Toll Free Fax:888/266-4986.
Minnesota Nursery & Landscape Association2013 Irrigation Show & Education Conference – Austin, Texas November 4, 2013 to November 7, 2013Time: All DayLocation: Austin Convention Center, Austin, TexasWhere Irrigation Meets InnovationWhat better place to think about changing things up than in Austin, Texas? Aplace to be different and stand out from the crowd. A place where energy andcreativity run high and diverse ideas come together. This year’s show is the placeto uncover opportunity, launch new ideas, up your game and have fun! Formore information, please contact the MNLA office phone at 651/633-4987; TollFree: 888/886-6652 or email [email protected]; Fax: 651/633-4986; Toll FreeFax: 888/266-4986.
CONSTRUCTION ASSOCIATION OF MICHIGAN (CAM) GOLF SEASON is JUST AROUND THE CORNER !!! Be sure to mark your calendars for these upcoming CAM GOLF OUTINGS. September 23 – Plum Hollow Country Club, Southfield, Michigan“Old Timers Classic” - $135 per person. Package includes complimentary driv-ing range; 18 holes of golf with cart; grilled lunch on the course; beverage serv-ice on the course; dinner with open bar; awards and door prizes. For more information, please contact Diana Brown at (248) 972-1000.
August 16 – 18, 2013 – Convention. Historical Construction EquipmentAssociation – HCEA International Convention and Old Equipment Exposition.The HCEA holds one annual convention and old equipment exposition eachyear. Somewhere in either the lower 48 or Canada, members, local fans,exhibitors, merchandise retailers and, of course, a lot of working machines arebrought together for learn and share a bit of history. Next Show: WILMINGTON,ILLINOIS HCEA International Convention’s next show is AUGUST 16 thru 18,2013 at the International Union of Operating Engineers’ Local 150 TrainingCenter at 19800 West Arsenal Road, Wilmington, Illinois. For more information
on this event, you may call the HCEA office at 419/352-5616; fax at 419/352-6086 or email: [email protected].
Tuesday, August 27, 2013 - Wednesday, August 28, 2013 – Conference andTrade Show. Pennsylvania Independent Oil & Gas Association’s (PIOGA’s)Eastern Oil & Gas Conference and Trade Show is being held at the MonroevilleConvention Center, Monroeville, PA For more information on the above PIOGAevents, please contact PIOGA’s office at 724/933-7306 or fax: 724/933-7310.
September 4-6, 2013 – Seminar. RAM, Inc.’s Fall 2013 Blasting andExplosives Safety Training Seminar. The two and one-half day continuous edu-cation training session will be held at the South Dakota School of Mines in RapidCity, S.D., September 4-6, 2013; presented by Robert A. McClure, Inc. (RAM,Inc.). The final day of the seminar will be capped by a special night blast at theCrazy Horse Memorial on September 6 for all attendees. An early course regis-tration fee of $895/person is available thru July 31, 2013. Full registration feeis $950 beginning August 1, 2013 with a deadline date of August 15. Hotel:Adoba Eco Hotel Rapid City/Mt. Rushmore – special seminar rates available.Course topics have been selected to offer value to all professionals with variedexperience levels, from individuals with decades of experience to those just enter-ing the explosives industry. To register and for more information, please visitwebsite: www.ramets.com. More contact information: Trade Press Contact: RickZettler; Phone: 319/265-0052; Fax: 319/265-0053; email:[email protected]. Ram, Inc., Contact: Robert McClure; Phone: 740/363-6976; Fax: 740/362-3946; Email: [email protected].
The International Bridge, Tunnel and Turnpike Association (IBTTA) – theworldwide association representing toll facility owners and operators andbusinesses that serve them, today announced the full agenda and list ofspeakers for their 81st Annual Meeting to be held September 22 to 25 inVancouver, British Columbia. This year’s 2013 meeting, MovingSmarter: How Tolling meets the Challenge, will feature a keynote addressfrom Daniel Sieberg, Head of Media Outreach for Google, and specialpresentation from Bryan Norcross, Senior Hurricane Specialist for TheWeather Channel. “Vancouver is the perfect place to meet,” stated RobHorr, President IBTTA and Executive Director of the Thousand IslandsBridge Authority in New York. “The city is an efficient, increasingly inte-grated transportation system that stands as a model for other communi-ties around the globe.” IBTTA’s 81st Annual Meeting and Exhibition is host-ed by the Transportation Investment Corporation (TI Corp), BritishColumbia’s Crown Corporation responsible for the Port Mann/Highway 1Improvement Project. You may contact Brad Luna, Luna Eisenia Mediaat 202/812-8140 (mobile) for more information or visit: www.IBTTA.org.
ICUEE, the International Construction and Utility Equipment Exposition is alsoknown as The Demo Expo, and is the exposition for demonstrations of con-struction and utility equipment. At ICUEE, attendees can operate the equipmentthemselves and explore the newest products and innovations in the industry.The broad spectrum of equipment available to operate is the ultimate in com-petitive comparisons. An extensive education program complements displays ofthe latest equipment technology and product innovations. ICUEE 2013 will beheld October 1 thru 3, 2013 at the Kentucky Fair & Exposition Center, 937Phillips Lane, Louisville, Kentucky, USA. For more information on this Expo youmay contact Jim Wurm, Executive Director of Exhibit & Event MarketersAssociation, at 541/317-8768.
PAUL BUNYAN SHOW – the official Paul Bunyan Show is one of the nation’slargest and oldest forest industry shows. Show attendees will see more than130 exhibits representing all facets of the forest industry throughout NorthAmerica. Representatives will be on site to showcase equipment, manpowerand the dedication that has made the industry what it is today. Lumberjackentertainment and competitions will take place throughout the weekend as wellas numerous educational sessions on topics ranging from logging equipmentsafety and maintenance to the history and restoration of the bald eagle in Ohioto Ohio’s edible mushrooms. Visitors to the show will not want to leave withouttrying an official Bunyan Burger, a 14 oz. angus burger with all the trimmings.For more information, visit www.ohioforest.org. WHEN: OCTOBER 4 thru 6, 2013Friday-Saturday 8:00 AM to 6:00 PM; Sunday 9:00 AM to 3:00 PMLOCATION: (Map It) Guernsey County Fairgrounds at 335 Old National Roadin (Old Washington) Cambridge, OH (Exit 186 off of I-70). PHONE: 614/497-9580
19th Annual New York State Highway and Public Works Expo will be held onOctober 16, 2013 in the Americraft Center of Progress at the New York StateFairgrounds in Syracuse, NY. Free admission tickets are sent to every village,city, town, county and state highway and public works professional in New YorkState. Exhibitors from around the state and the nation will gather in Syracuse forthe annual Expo that puts them face to face with municipal budget decision mak-ers. Superintendents, Board Members, Engineers, MunicipalContractors…they’re all at the Expo! The Expo is held at the peak of the annu-al budget decision making process in municipalities across the state…A greattime to showcase what you sell, make new contacts, introduce new productsand strengthen relationships with your existing municipal customers!
GIE+EXPO – The Green Industry & Equipment ExpoDealer Day: October 23, 2013All Attendees: October 24 and 25, 2013Kentucky Expo CenterLouisville, KentuckyTwo Tradeshows – GIE+EXPO and Hardscape North America – co-located inone central location, provide your No. 1 opportunity to see what your industryis buzzing about. The 29-acre Outdoor Demonstration Area, within easy walk-ing distance of the indoor exhibits, and the New Products Showcase makethese prestigious shows an exceptionally efficient, productive marketplace. The 2012 GIE+EXPO runs October 24 & 25 in Louisville, KY. Co-locatedagain this year with Hardscape North America, the industry’s largest tradeshow will host more than 15,000 attendees. For details on education ses-sions, produce demonstration schedules and to register, visit www.gie-expo.com or www.HardscapeNA.com.
Ohio Aggregates & Industrial Minerals AssociationOAIMA Annual Meeting 2013November 14 and 15, 2013, Columbus Hilton at Easton, Columbus, OhioFor more information on this meeting, please call toll free: 800/OH-ROCKS(647-6257) Phone: 614/428-7954 Fax: 614/428-7919 Email:[email protected].
BusinessCalendar
COMPACTION EQUIPMENT
Vibratory Compactors
2005 Bomag BW138AD,Double Smooth Drum Roller,Vibratory Roller, 2117 hours ......................................$20,500.
316-945-1015
Compaction - Misc.
2006 Vibromax/JCB VM 115,125 HP, 25,000 lbs WeightSingle Drum, 83’’ Drum Width,good condition, low hours ..................................Call for Price
2006 Vibromax/JCB VM75 80HP, 16,000 lbs Weight, SingleDrum, 69’’ Drum Width, goodcondition,620 hours ............................................Call for Price
908-625-0697
EXCAVATORS
Hydraulic Excavators
2002 John Deere 330CLC Aux.Hyd., A/C, 32’’ pads, 2-speed,8360 hours ..............$347,500.
316-945-1015
Wheeled Excavators
1978 CAT 988, Fair conditon,call for hour ................$20,000.
440-439-4000
FORESTRY EQUIPMENT
Loaders & Stackers
2006 John Deere 2054 LogLoader, 36’’ Pads, A/C,Grapple-Hydraulic, 2-speed,10972 hours ..............$93,500.
316-945-1015
Skidders
2008 John Deere 648H,30.5x32 Tires, A/C, Bias,Bunching Head, HD StackingBlade, 3044 hours ....$147,500.2003 John Deere 648G III TC,A/C, 30.5x32 Tires, Bias,Continuous Rotation and Dualfunction Grapple, 9078 hours ....................................$39,500.
316-945-1015
FORKLIFTS
Rough Terrain Forklifts
2010 JCB 930-4, 6,000 lbs Lift,22’’ ft. Clearview Mast, 4WD,Canopy Model, 66’’Carriage/48’’ Forks, good con-dition, low hours ........$35,000.
908-625-0697
LOADERS
Backhoe Loaders
2008 Yanmar CBL40, PTO, 3ptHitch, bucket attached with skidplate, great condition ....CALL.
641-628-2000
2009 John Deere 310SJ, Cabw/ AC, GP Bkt, 19.5 Tires, 4x4Power Shift, 1.3 yd. bkt, 18’’ bkt,4518 hours ................$62,500.
316-945-1015
2009 John Deere 710J, 1.3 ydLdr Bkt, 24’’ Hoe Bkt, 4x4, A/C,Aux. Hyd. 2 way, 824 hours$145,000.
316-945-1015
2008 YANMAR CBL40, 3 pt.hitch, PTO, loader bucketattached w/ skid plate, greatcondition, 216 hours ..........................................Call for Price.
641-628-2000
Skid Steer Loaders
2005 John Deere 325, AuxHyds, 2 Speed, Turbo, Cab,Hyd. Quick Tatch, 4569 hours ....................................$19,250.
316-945-1015
2006 GEHL CTL80, 9 in stock,dealer owned & maintained, GPbucket, clearance, used condi-tion, 252 hours ............................................$30,000-$42,000.
219-977-4210
2010 GEHL V270, 150 JoystickControls & Radiator Guard,excellent condition, 785 hours....................................$32,000.
219-696-8911
2003 GEHL SL5640, Bucket,price reduced, 1108 hours..........................................$15,900.
219-977-4210
MOTOR GRADERS
Graders
1995 Galion 850, Cab, 12’Moldboard, 14:00x24 Tires,good condition, 4100 hours........................................$56,500.
913-787-2371
2009 John Deere 670G, 1-Aux.Valve, 14’ blade, 14.00x24 tires,A/C, 1677 hours ......$177,500.
316-945-1015
RECYCLING EQUIPMENT
Screening Equipment
2008 Genesis GVP7R, VersiPro Shear, Includes Shear Jawbut other jaws available forsale, good condition ..$34,800.
440-439-4000
SCRAPERS
Pull Behind Scrapers
IMC GE1210 Pull Type Scraper,Ejector Type, Spill Guard ..........................................$52,850.
316-945-1015
SNOW EQUIPMENT
Snow Plows
2013 International 7600 SFA6x4, Henderson 14’ EllipticalBody & Sander, 10’ underbodyplow, 12’ wing plow, RSP Rev.plow, excellent condition ....................................Call for Price.2013 International, Henderson11965A, Automatic Trans, 11’Stainless Steel Body, 10’ under-body plow, floating wingmastplow, 2-way Rev. plow sander,excellent condition..............................................Call for Price.2011 Freightliner M2-106V,Henderson 1196-SA, 11’Elliptical Body, FAUBS under-body scraper, 8’ wing plow, 2-way Rev. plow, TGS StainlessSteel sander, excellent condi-tion ....................Call for Price.
952-656-7132
Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on
our online searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.
PLEASE ENCLOSE PAYMENT WITH ORDER and mail to:470 Maryland Drive• Fort Washington, PA 19034
215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200
CLASSIFIEDS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 89
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95, Color Ad $145
2007 Kobelco SK480LC, 6798 Hrs.........$115,000Call David at 219-696-5680
2007 BA 10000, with 1025 hours and serviced togo, FOB North Carolina .........List price of $89,000
Jay 319-504-6834 17-18 PK
1991 John Deere 300D, S/N 775834, OpenROPS..........................................................$19,000Call 502/456-4050 Ask for Melissa or Albert 17-18 EB
17-18 JM
JCB 155, Only 20 Hrs, Cab, Heat, A/C, 2 Speed ........................................................................$29,500
Call Dan 612-306-4496 16-17 PK
New Compact Excavators ....Starting at $41,000Call Dan 612-306-4496 16-17 PK
2007 Kobelco SK290LC-LR, s/n YQ13U5369,4390 Hrs, 62’ Long Reach........................$135,000
Call David 219-696-5680 17-18 JM
2011 Bobcat S185, 131 hrs, enclosed cab, A/C, heat, HighFlow, 2 speed, keyless start, block heater E/N 1049733$33,000
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 17-18 JM
2011 Bobcat S185 A91, Enclosed Cab, Heat, A/C,Suspension Seat, Power BobTach, HighFlow, 2 Speed, 156Hrs, E/N 1049733......................................................$33,000
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Garden City, KS 17-18 JM
2007 New Holland C190, 3241 Hrs, 81 HP, Cab w/Heat,2900# Capacity, 2 Speed, Cold Start, 9950 Lbs........$23,900
Call Steve Samosky • 262/373-2151 17-18 JM
“TRACKS FOR YOUR MACHINE!!” $7,000,000 Inventory of High-QualityRubber Tracks to fit over 3000 models of construction equip. PNEUMATICAND FLATPROOF SKIDSTEER TIRES also available. $95 Next day ship-ping to 23 states...........................................................................................Call
Summit Supply LLC888-888-1248 • [email protected] 17-18 TM
2007 New Holland L190, 2300 Hrs, 78” Bkt, 90 HP, 2Speed, Cab, 2800# Capacity, 7765 Lbs.....................$23,400
Call Steve Samosky • 262/373-2151 17-18 JM
2011 Bobcat 5610 UTV Turbo Toolcat Work Machine, 110 hrs,E/N 1044023 ..................................................................$47,500
800-950-3321 • www.whitestarmachinery.comWhite Star Machinery, Wichita, KS 17-18 JM
CAT D400E SERIES 2 40 TON, Good Paint, Glass, HEAT/AC,Above average, Very few leaks, All zerks work. Great runningtruck. Average Rubber. Can Deliver ...........................$55,000
Call Mike anytime (319)470-8388email: [email protected] 17-18 PK
2010 Bobcat S150 Skid Steer Loader, 120 Hrs, EnclosedCab, Heat 6 Mo. Driveline Warranty, New Tooth Bkt
Glenn Engels 316-641-4896 • Wichita, KS 17-18 JM
1993 Grove Rt 422,22 Ton S/N # 78334,Cummins 4 Cyl12,100 Hours, 3Speed Transmission,27’-70’ Main Boom,25’-43’ Jib, AuxilliaryHoist,17.5 X 25 Tires,Ball, New Rotec,Boom Scope CylinderRebuilt, Fresh GrovePaint, Cleveland Ohio
Call Andy 216-316-1511
17-18 EB
1981 Grove Rt 755, 55 Ton S/N # 49225,Cummins Rebuilt, 110’ Main Boom, 32’ Jib,
Auxilliary Hoist, 5 Sheave Block, Cleveland OhioCall Andy 216-316-1511 17-18 EB
Trail King TK110HDG detachable Trailer, 55 TonLow Boy w/ 13' detachable HYD gooseneck, 31"front loading ramps, swing out outriggers w/lumber,25'9" main deck, PTO hydraulics, HYD. ........$79,000
Call Runnion Equipment Co.708-447-3169
www.runnionequipment.comCall after hours, or on the weekend at 414-870-3169 17-18 JM
CAT D6H, SWAMP CAT, Operates in 6ft of water; 40” trackshoes; 15ft roller frame; Ground pressure 3.3 PSI; Groundclearance 38”; GPS ready; For Sale or Lease, DeliveryAvailable ..................................................................$165,000
Mike • (319)470-8388 • Pieper, Inc [email protected] 17-18 PK
HITACHI ZAXIS 600LC MASS EX 7CY, Warranty on Pumps,Track+ Swing+ Drive Motors, Final Drive, Cylinders, Rollers,Idlers. Can Deliver. LEASE/RENT.TIGHT MACHINE, ABOVEAVERAGE. Must Sale ...................................................$190,000
CALL Mike anytime, 319-470-8388email: [email protected] 17-18 PK
2005 John Deere 270CLC, 3129 hours 65%undercarriage, 12 foot 4 stick. Heat and Ac,straight, no leaks and fully serviced to go
Price reduced $25,000 to sell fast $88,500Jay 319-504-6834 17-18 PK
Page 90 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The Easy Way To Advertise Your EquipmentValued At Less Than $1 Million Run In TwoConsecutive Issues For $95
Here's how the BARGAIN ADS Work:
• Supply us with a photo of a machine (one machine per Bargain Ad)
and a maximum 20 word description, plus contact and phone number.
• Either email your copy & photo to: [email protected],
or mail to:
Construction Equipment Guide, 470 Maryland Drive,
Ft Washington, PA 19034.
• Cost is $95 per ad, $50 additional for color.
• Your ad will run for two consecutive issues in 1 region.
Your Ad Will Be Seen By Over 25,589 Construction
Equipment Buyers in the Midwest States.
For more information, call Construction
Equipment Guide today at 800/523-2200
2006 John Deere 410G TLB, 1910 Hrs, 4WD, Cab, A/C, Ext.A Hoe, Coupler, 96 HP, 19,268 Lbs ...........................$53,900
Call Steve Samosky • 262/373-2151 17-18 JM
2010 Wacker 3001 Dumper, 97 Hrs, 4WD, Swivel,Articulated, 2.3 Yd, 6,600# Capacity .........................$29,300
Call Steve Samosky • 262/373-2151 17-18 JM
2005 Cat 287B, 1,485 hrs, OROPS, 82 hp, 10,300 lbs, 80”bkt, 2,520# capacity ..................................................$23,900
Call Steve Samosky • 262/373-2151 17-18 JM
2009 New Holland L185, 1,900 hrs, 72” bucket, cab, heat, 2 speed, 2,500# capacity, 82 hp, 7,100 lbs...............$24,400
Call Steve Samosky • 262/373-2151 17-18 JM
Cat 938G, EROPS, AC, QC, Bkt and Forks,%0%+Tires .................................................$54,500
Courts Machinery • 507/678-2752 16-17 PK
2010 Gehl V270 Vertical Lift Skid Loader, Like New,One Owner, 785 Hrs, OROPS, ISO Joystick Controls,74” 22.8 Cu. Ft. HD Bkt, Custom Radiator Guard,Super Nice Machine! .......................................$32,000
Call George 219-696-8911 17-18 JM
1998 Coyote C20B, 7600 Hrs, 1 1/2 Cubic Yard Bkt,2 Speed Hydrostatic Drive, 70 HP Perkins Engine,Enclosed Heated Cab, Strong Running Machine,Bargain Priced
Call Steve 330-650-5101 16-17 EB
2005 Mustang 2099 Skid Steer, s/n H00102504,4205 Hrs, 86 HP Perkins Engine, Open ROPS, Hand/Foot Controls, High Flow Aux, 384” Tooth Bkt $18,500
Call George 219-696-8911 17-18 JM
Next Issue ClosesAugust 22nd
Demolition Lease Units, 100% Warranty. As little as 3to 6 hours on some units. 70,000 to 200,000 #Excavators ...............$20,000 to $50,000 call for quote
[email protected] • 218-863-6444 17-18 AP
2003 Case 60XT, s/n JAF0366712, 3000 Hrs,Rops, Cold Start, 72” Bkt, 12x16.5 Foam FilledTires............................................................$13,800
Call Dennis 630-774-8830 17-18 JM
2005 Takeuchi TB135, s/n 13516545, 2450 Hrs,Cab w/Heat & AC, Dozer Blade, 12” and 24” Bkts ......................................................................$31,000
Call Steve 630-878-8765 17-18 JM
2005 Mustang 6003, 1665 Hrs, 18”, 24” & 36”buckets, dozer blade, excellent condition ...$40,000
Call Tim 630-665-560017-18 JM
2006 Mustang 3803ZT Zero Turn, 1591 Hrs, 12”,18” & 24” buckets, tracks are new................$27,370
Call Tim 630-665-560017-18 JM
2006 Case CX210, s/n DAC213006, 5060 Hrs,18’8” Boom Arm, 7’10”, Shoe 3-Bar Steel 24”,Control Pattern Valve, Dbl Acting Aux Hyd, Coupler....................................................................$82,000
Call Mark 630-739-7770 17-18 JM
SEE YOUR BARGAIN AD INCOLOR
ONLY $50 EXTRA FOR TWO INSERTIONS
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 91
1989 TO 1996 420 JOHN DEERE FRONTMOUNT ENGINE RIDING LAWN MOWERCONTACT: SPENCER THOMASPHONE: 804 514 7568EMAIL:[email protected]––––––––––––––––––––––––––––––––FRACK TANKS | NEED 6 TANKSCONTACT: JOHN EDDLEMANFAX: 870-762-0073EMAIL:[email protected]––––––––––––––––––––––––––––––––TRACKED SCREENING PLANT INSOUTHWESTCONTACT: JACK DYKSTRAPHONE: 602 390 4846FAX: 602 269 5863EMAIL:[email protected]––––––––––––––––––––––––––––––––A WINCH TO FIT A DRESSTA DOZER TD15 H SERIAL #-32584CONTACT: EDWARD BECKERPHONE: 870-421-8301EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU MOBILE CRUSHERMODEL:BR300JG AND BR350JGKOMATSU OFF-ROAD DUMP TRUCKHD325-5 AND HD465-5CONTACT: K.NAKAPHONE: 06-6754-4570FAX: 06-6972-7515EMAIL: [email protected]––––––––––––––––––––––––––––––––CATERPILLAR 12H | WE AREINSTALLING A MID-MOUNT SCARIFIERON A CAT 12H GRADER AND ARE INNEED OF 1)8W-0684 BRACKET ASSEM-BLY AND 1)8W-0681 PLATE.CONTACT: WENDELL CAINPHONE: 770-381-8984FAX: 770-381-6977EMAIL:[email protected]––––––––––––––––––––––––––––––––ZF GEAR BOXES (MIXER DRIVE) | WEWANT TO BUY: CONCRETE READY MIXZF DRUM DRIVE GOOD USED OR CORE CONTACT: M.ASKARIPHONE: 819-246-9577FAX: 819-2050972EMAIL:[email protected]––––––––––––––––––––––––––––––––WANTED CAT LOADERS!! | NEED THEFOLLOWING CAT LOADERS: 9 3 6 (84 -92) 9 3 8 G (AROUND YEAR 05) 9 5 0B/C/E/F-II (78 UP) 9 5 0 G/H (’05 – ’09,FULL STEERING ONLY) 9 6 6 C/D/E/F (78UP) 9 6 6 H (’09 – ’11, FULL STEERINGONLY, HOURS AROUND 8000 OR LESS,ORIGINAL PAINT) 9 8 0 C/F (87 UP)CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected] ––––––––––––––––––––––––––––––––TRANSMISSION ASSEMBLYCONTACT: SATHISHEMAIL: [email protected]––––––––––––––––––––––––––––––––
TRANSMISSION | THIS TRANSMISSIONIS USED IN OFF ROAD DUMP TRUCKS. INEED IT IN AS REMOVED OR AS ISCONDITION. OPEN, UNSERVICEABLE ISACCEPTABLE TOO. I DONT NEED AREBUILT OR NEW.CONTACT: ALLISON M5600ARPHONE: 3013388999FAX: 3016326405EMAIL:[email protected]––––––––––––––––––––––––––––––––USED ATLAS COPCO CRAWLER 203 |WAGON DRILLCONTACT: KABASHIEMAIL: [email protected] ––––––––––––––––––––––––––––––––LOOKING FOR WORKABLE LIMA 2400DRAG LINE CRANE.CONTACT: JOHN STRACENERPHONE: 520 840 9718FAX: 520 568 1595EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU D375 TRACK DOZER | FULLSPEC., LESS THAN 10, 000 HOURS, USLOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––WE BUY MANUALS | WE ARE LOOKINGTO PURCHASE NEW OR USED SERV-ICE, SHOP, PARTS, OPERATOR’S OROTHER MANUALS FOR EQUIPMENT,TRUCKS AND VEHICLES OF ALLSORTS. WE PREFER IN BULK, PER-HAPS YOU HAVE COMPUTERIZEDYOUR SERVICE OR PARTS OPERATIONAND YOU HAVE BOOKS OR MANUALSYOU NO LONGER NEED, OR INVENTO-RIES YOU HAVE NOT SOLD AS A DIS-CONTINUED PRODUCT LINE. WE WILLPURCHASE IN ANY USEABLE CONDI-TION IN ANY AMOUNT YOU HAVE. CONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––TADANO CRANE 45 TON AND 50 TON |NEED TO BUY TADANO TRUCK CRANE45 TON AND 50 TON, IF YOU HAVE ANYIN STOCK OR CAN LOCATE PLEASESEND ME PICTURES, DETAILS ANDBEST PRICE. CONTACT: ABDAL SALEEMPHONE: 96638428312FAX: 96663312326EMAIL:[email protected]––––––––––––––––––––––––––––––––PROOF ROLLER PULL BEHIND | PULLBEHIND 50 TONCONTACT: RICK HUDDYPHONE: 19377266978EMAIL: [email protected]––––––––––––––––––––––––––––––––ANY MARSH BUGGIES USED/NEW FORSALE OR RENT. NEED NOW. PLEASESEND PRICE, PICS, AND LOCATION TOMY EMAIL THANKSCONTACT: TYLER PALUMBOPHONE: 330-365-0654EMAIL: [email protected]––––––––––––––––––––––––––––––––
FORKS FOR 922B, QUICK COUPLER,MFG BALDERSON, MODEL#BQ922,MADE IN WAMEGO, KAN.CONTACT: RAND URMSTONPHONE: 973-334-1103FAX: 973-402-8122EMAIL:[email protected]––––––––––––––––––––––––––––––––KOMATSU BR380 JG1 TRACK JAW |LATE MODEL LOW HOUR USA LOCA-TIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––A4JB1 ISUZU DIESEL | REPLACEMENTENGINE FOR SKID LOADERCONTACT: C.B. GERLOFFEMAIL: [email protected]––––––––––––––––––––––––––––––––CAT 322CL W/ LABOUNTY MSD2000RHOURS: 1011 ON MACHINE HOURS: 300ON SHEAR MACHINE IN EXCELLENTSHAPE.CONTACT: ROBERT HARRELLPHONE: 609-561-7702FAX: 609-561-7706EMAIL:[email protected]––––––––––––––––––––––––––––––––HYDROSEEDERCONTACT: JAMES ALLENEMAIL:[email protected]––––––––––––––––––––––––––––––––DOZER | LOOKING FOR 1998-2005D6RLGP FROM 45K TO 65K. ALSONEED D6HLGP AND D7HLGP UNDER38K. THANKS FOR THE OFFERS!CONTACT: SANTIAGOEMAIL: [email protected]––––––––––––––––––––––––––––––––FERTILIZER SPREADEREMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU | SPECS FOR KOMATSUDOZER P39AXCONTACT: JB WATLINGTONPHONE: 434-250-3891EMAIL: [email protected]––––––––––––––––––––––––––––––––6-IN-1 BUCKET FOR JCB 214S 1994CONTACT: DONPHONE: 908-614-5568EMAIL: [email protected]––––––––––––––––––––––––––––––––NEED TRUCK CRANE LIEBHERR ORGROVE 130 TO 200 TONS, 2006 TO 2011CONTACT: FRED GUTIERREZPHONE: 770-978-3969FAX: 770-978-3969EMAIL:[email protected]––––––––––––––––––––––––––––––––1950S MODEL 40V JOHN DEERE FARMTRACTORCONTACT: STEVE GAUTREAUPHONE: 225-644-3404EMAIL:[email protected]––––––––––––––––––––––––––––––––
EXCAVATORS, DOZER | WE NEED USEDEXCAVATORS FOR EXPORT.CONTACT: ANTHONY TRANPHONE: 714-496-7229EMAIL:[email protected]––––––––––––––––––––––––––––––––WOOD CHPPERCONTACT: DAVIDEMAIL: [email protected]––––––––––––––––––––––––––––––––HYDRULIC JACKHAMMER ATTACH-MENT FOR POSITRAC (ASV) OR BOB-CAT | LOOKING FOR A HAMMER TOBUST CONCRETECONTACT: MIKEEMAIL: [email protected]––––––––––––––––––––––––––––––––MICROPILE DRILL WITH DEPTH CAPAC-ITY OF 450-600 KL WITH 4-6 TONS.CONTACT: CAMILA MATÍNEZPHONE: 954-456-0746EMAIL:[email protected]––––––––––––––––––––––––––––––––MOTOR GRADER | NEEDED ONE1999/2000 CAT 140H WITH REAR RIP-PER, UNDER 13.000 HRS. LOCATIONUSA. PLEASE SEND BEST WHOLESALEPRICE.CONTACT: SANTIAGO SCARZELLAPHONE: 305-506-4263EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED ALL THE TIME 12 MONTHSBULLDOZER D3AT D10 USER WITH RIP-PER USA ONLY | FROM USER CONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975 ORMOB 1 514 386 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR KOMATSU HD325-6, CAT988B SN : 50W10000UP, KAWASAKIKLD70 AND 80 YR 1998 UPCONTACT: TAKAYUKI NAKAMURAPHONE: 06-6754-4570FAX: 06-6972-7515EMAIL:[email protected]––––––––––––––––––––––––––––––––
WE BUY AND SELL EQUIPMENT MANUALS OF DIFFERENT MAKE FROMJOHN DEERE CATERPILLAR AND OTHERS. PLEASE CHECK OUR WEB-SITE FRANCESFARMEQUIPMENT.COMFOR MORE INFORMATIONCONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––MANIFOLD, MUFFLER, STUDS FOR A1992 JOHN DEERE 955CONTACT: TIM KURYLAPHONE: 315-310-1969EMAIL: [email protected]––––––––––––––––––––––––––––––––
DUMP BODY WITH HOST EQUIPMENTFOR FORD F 550 NO RUST PLEASECONTACT: DALEPHONE: 508 328 5778EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 TRACK JAW |LATE MODEL LOW HOUR USA LOCA-TIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––NEW AND USED GROVE GMK3050-1.CONTACT: SHELLEY MICHELSPHONE: 613-727-0510EMAIL: [email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING TO BUY THE FOL-LOWING USED WHEEL LOADERS: 9 2 0(78 - 85) 9 3 0 (78 - 86) 9 3 6 (84 - 92) 9 38 G (AROUND YEAR 05) 9 5 0 B/C/E/F-II(78 UP) 9 5 0 G/H (’05 – ’09, FULLSTEERING ONLY) 9 6 6 C/D/E/F (78 UP) 96 6 H (’09 – ’11, FULL STEERING ONLY,HOURS AROUND 8000 OR LESS, ORIGI-NAL PAINT) 9 8 0 C/F (87 UP) EMAIL USWITH PICTURES, SERIAL NUMBER,MACHINE CONDITION & LOCATION ANDFINAL OFFER PRICECONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––SKID STEER LOADERS WITH TRACKSCONTACT: DEWEYPHONE: 601-441-8849EMAIL: [email protected]––––––––––––––––––––––––––––––––1996 TO 2000 GROVE CRANE 80 TONS.CONTACT: FRANCIS NPHONE: 302-897-5373EMAIL: [email protected]––––––––––––––––––––––––––––––––SMALL B7200 OR B7100 KUBOTATRACTOR. PREFERABLY 4WD, WITH DPOSY LOCK DRIVE.CONTACT: W. R. YOUNGERPHONE: 865 986 0576 OR 865 604 1271EMAIL:[email protected]––––––––––––––––––––––––––––––––
LOOKING TO BUY 2 LIFT JOCKEY LIFTMANUFACTURED BY STONE MFG.CONTACT: PAUL MADSENPHONE: 407-468-1070EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED BULLDOZER D8K WITH WINCHGOOD UNDERCARRIAGE LOW LOWPRICE USER ONLY | NEEDED BULL-DOZER D8K WITH WINCH NOT ADVER-TISED USER USA THE REST NOTINTERESTED NO SALE MANCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975 OR MOB 1-514-386-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––PVE PILE MACHINE | I WANT 700 NOGPILE WORKCONTACT: SK SINGPHONE: 09172818848EMAIL: [email protected]––––––––––––––––––––––––––––––––COMPACTION TOOL, AND VIBRATIONCONCRETE | I WANT INFORMATION OFTHE COMPACTION TOOL AND VIBRA-TION CEMENTCONTACT: SOLEDAD DIAZEMAIL:[email protected]––––––––––––––––––––––––––––––––QUICK ATTACH FORKLIFT | FORKATTACHMENT FOR CAT 416C-TC.CONTACT: FRED GIERINGERPHONE: 610-858-3933EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR TRUCK MOUNTEDCRANES KATO OR TADANO. 1988 -2008 25 TONS UP TO 50 TONS ONLY.PREFER RIGHT HAND DRIVE. TRADEPRICES ONLY.CONTACT: RAYPHONE: +97144429100EMAIL: [email protected]––––––––––––––––––––––––––––––––YANMAR 3TNV88QTB | NEED RUNNINGENGINE FOR TAKEUCHI TB135CONTACT: LOUEMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR CAT 988 SN : 87A8680YR: 1975 EX. USACONTACT: TAKAYUKI NAKAMURAPHONE: 06-6754-4570FAX: 06-6972-7515EMAIL:[email protected]––––––––––––––––––––––––––––––––EXCAVATOR AND HEAVY DUTYROLLERCONTACT: CHARLES MWAURAPHONE: +254722525396FAX: 020445567EMAIL:[email protected]––––––––––––––––––––––––––––––––GRANULATING MACHINES | A MACHINETO GRANULATE FERTILIZERCONTACT: ELODIAEMAIL: [email protected]––––––––––––––––––––––––––––––––
Attention Contractors!Post Your Wanted To Buy Listings FREE!
Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website
for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.
Page 92 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ALEX LYON & SON
AUCTIONEERS
www.lyonauction.com
315-633-2944�
• Canton, OH
Sat., August 17, 2013For: Major Job Completion ofCranes, Forklifts, Skid Steers,Welders, Trucks & Trailers
• Parkersburg, WV
Thurs., August 22, 2013For: Late Model John Deere &Cat Construction Equipment
• Queretaro, Mexico
Fri., August 23, 2013For: Late Model ConstructionEquipment (mostly Cat), Asphalt& Vibratory Roller, Aerial Lifts
• Atlantic City, NJ
Sat., August 24, 2013For: Construction Equipment,Trucks, Trailers
• Houston, TX
Tues., August 27, 2013For: Late Model Construction,Aerials, Forklifts, Skid Steers,Cars
• Barranquilla, Columbia
Sat., August 31, 2013For: Late Model Cat, John Deere,Komatsu Equipment
• Long Island, NY
Sat., September 7, 2013For: Complete Liquidation ofLocal Rental ConstructionCompany
• Ashtabula, OH
Thurs., September 12, 2013For: Complete Liquidation of for-mer Major Scrap Company
• Cleveland, OH
Fri., September 13, 2013For: Complete LiquidationConstruction Equipment
• Bangor, ME
Sun., September 15, 2013For: Light Construction & SupportEquipment
• Reno, NV
Thurs., September 19, 2013For: Earthmoving, Asphalt &Paving Equipment, Trucks/Trailers
• Boston, MA
Sat., September 21, 2013For: Complete Liquidation,Construction Equipment, TruckTractors & Trailers
• San Bernardino, CA
Fri., September 27, 2013For: Cat, Komatsu, John DeereEarthmoving Equipment
• Portland, OR
Fri., October 4, 2013For: Late Model ConstructionRental Fleet Equipment
• Central Square (Syracuse), NY
Sat., October 12, 2013For: Complete Liquidation ofConstruction Equipment
• Las Vegas, NV
Sat., October 19, 2013For: Late Model Rental FleetEquipment, Booms, Scissors,Telescopic & Warehouse Forklifts
• Lima, Peru
Sat., October 26, 2013
For: Late Model EarthmovingConstruction Equipment, Support& Attachments.
• Buffalo, NY
Fri., November 1, 2013For: Late Model Construction &Boring Equipment, Trucks &Trailers
• Canastota (Syracuse), NY
Sat., November 2, 2013For: Rental Returns of Late ModelConstruction Equipment
• Delaware, NJ
Sat., November 9, 2013For: Very Large ContractCompletion Auction
RITCHIE BROS.
AUCTIONEERS
www.rbauction.com
402-421-2631
• Sacramento, CA
August 20, 2013
• Charleston, WV
August 21, 2013
• Los Angeles, CA
August 22, 2013
• Medford, OR
August 23, 2013
• Houston, TX
August 28-29, 2013
• North East, MD
August 29, 2013
• Columbus, OH
September 12, 2013
• Towanda, PA
September 13, 2013
• Atlanta, GA
September 20, 2013
• Nashville, TN
September 24, 2013
• Raleigh Durham, NC
September 30, 2013
BAR NONE AUCTION
www.barnoneauction.com
866-372-1700�
• San Bernardino, CA
Sat., August 24, 2013For: Heavy Equipment &Commercial Truck Auction
BIG IRON
www.bigiron.com
800-937-3558�
• ONLINE ONLY
Wed., August 21, 2013For: Construction Equipment
• ONLINE ONLY
Wed., August 28, 2013For: Construction Equipment
CAT AUCTION SERVICES
www.catauctions.com
866-750-9432�
• Albuquerque, NM
September 19-20, 2013For: Unreserved Public Auction,Complete Dispersal A.S. HornerInc
COMMONWEALTH OF PA
AUCTIONS
www.auctionsbygov.com
• Mill Hall, PATues., October 8, 2013For: Fall Heavy Equipment
DEANCO AUCTIONS
www.deancoauction.com601-656-9768
• Philadelphia, MSSeptember 18-19, 2013For: Construction Equipment
• Philadelphia, MSNovember 20-21, 2013For: Construction Equipment
DEL PETERSON & ASSOCIATES
www.delpeterson.com�800-492-9090
• ONLINE ONLYTues., August 20, 2013For: Construction Equipment
• ONLINE ONLYTues., September 24, 2013For: Construction Equipment
DON SMOCK
AUCTION CO., INC.
www.dsa-auctions.com765-778-9277
• Pendleton, INSeptember 20, 2013For: Construction Equipment
• Pendleton, INDecember 13, 2013For: Construction Equipment
FREY & SONS, INC.
www.freyandsons.com�419-455-3739
• Burbank, OHThurs., August 22, 2013For: Construction Equipment
• Metamora (Flint/Lapeer), MIThurs., September 26, 2013For: Equipment from ForrestAggregate
HUNYADY AUCTION COMPANY
www.hunyady.com�800-233-6898
• York, PAWed., August 28, 2013For: Late Model Fleet Trades
• Eighty Four, PAThurs., September 12, 2013For: Absolute Auction CompleteLiquidation Mingo CreekConstruction
• New Orleans, LASealed Bid – Deadline:Wed., September 18, 2013
For: Pedestal Mount StevedoringCrane Barges
IRAY AUCTIONS
www.iraymn.com
�320-968-7230
• Foley, MN
Friday, September 13, 2013For: Construction Equipment
• Foley, MN
Friday, December 6, 2013For: Construction Equipment
IRON PLANET AUCTIONS
www.ironplanet.com
�888-433-5426
ONLINE AUCTIONSGo to www.ironplanet.com to view
the complete auction schedules,
inspection reports and to place
your bid!
• ONLINE ONLY
Thurs., August 22, 2013For: Oil & Gas
• ONLINE ONLY
Wed., September 11, 2013For: Lift & Access Auction
• ONLINE ONLY
Thurs., September 12, 2013For: Crane Auction
• ONLINE ONLY
September 25 & 26, 2013For: Quarry, Aggregate & PavingAuction
J.M. WOOD
AUCTION COMPANY
www.jmwood.com
�800-447-7085
• Montgomery, AL
September 11-12, 2013For: Construction Equipment,Trucks & Forestry Equipment
• Montgomery, AL
Fri., October 25, 2013For: State of Alabama Dept. ofTransportation
• Montgomery, AL
December 4-5, 2013For: Construction Equipment,Trucks & Forestry Equipment
MARTIN & MARTIN
AUCTIONEERS, INC.
www.mmaauction.com
�800-763-2728
• Charlotte, NC
Tues., September 17, 2013For: Construction Equipment,Trucks, Trailers & Related Items
• Pelzer, SC
Wed., September 25, 2013For: Public Fall Equipment &Truck Auction
MEEKINS AUCTION
COMPANY
www.meekinsauction.com
�800-499-6560
• Lumberton, NC
Tues., August 20, 2013For: Construction & AgriculturalEquipment
• Halifax, NC
Sat., August 31, 2013For: Construction & AgriculturalEquipment, Trucks & Trailers
MOTLEY’S AUCTION
& REALTY GROUP
www.motleys.com
�804-232-3300
• Richmond, VA
Tues., August 20, 2013For: One Owner AbsoluteEquipment Auction
NORTH COUNTRY AUCTIONS
www.northcountry-auctions.com603-539-5322
• Acton, MA
Thurs., August 22, 2013For: One Owner AbsoluteEquipment Auction
PETROWSKY
AUCTIONEERS INC.
www.petrowskyauctioneers.com�860-642-4200
• Bayonne, NJ
Thurs., September 12, 2013For: Equipment Liquidation
• North Franklin, CT
September 27-28, 2013For: Major Public EquipmentAuction
• Columbus, OH
Thurs., Oct 10, 2013For: Public Equipment Auction
• Carroll (Columbus Area), OH
Thurs., Oct 17, 2013For: Major Public EquipmentAuction
• Ponce, Puerto Rico
Thurs., November 14, 2013For: Major Job CompletionEquipment
PURPLE WAVE AUCTION
www.purplewave.com
�866-608-9283
• ONLINE ONLY
Tues., August 20, 2013For: Construction Equipment
• ONLINE ONLY
Wed., August 21, 2013For: Construction Equipment
• ONLINE ONLY
Thurs., August 22, 2013For: Construction Equipment
• ONLINE ONLY
Thurs., August 29, 2013For: Construction Equipment
RITCHASON AUCTIONEERS INC.
www.ritchason.com
�800-806-3395
• Lebanon, TN
Sat., September 21, 2013
For: Annual Fall Sale-
Construction Equipment, Trucks,
Trailers
ROY TIETSWORTH AUCTION-
EERS
www.tietsworth.com
�585-243-1563
• Seneca Falls, NY
Sat., September 21, 2013
For: Construction Equipment
SALES AUCTION
COMPANY, LLC
www.salesauctioncompany.com
�860-627-7506
• Windsor Locks, CT
Sat., October 5, 2013
For: Construction Equipment
UTILITY AUCTIONS
www.utilityauctions.net
�302-530-9103
• Wilmington, DE
Fri., August 23, 2013
For: Construction, Utility &
Forestry Equipment
VAUGHAN AUCTION GROUP
www.vaughanauctiongroup.com
�903-873-6777
• Wills Point, TX
Thurs., August 22, 2013
For: Summer Contractor’s Public
Auction
WAYNE PIKE
AUCTION COMPANY
www.waynepikeauction.com
763-389-2700
• Princeton, MN
Sat., September 14, 2013
For: Construction Equipment
• Princeton, MN
Sat., December 7, 2013
For: Construction Equipment
YODER & FREY
AUCTIONEERS, INC.
www.yoderandfrey.com
�419-865-3990
• Taylor, MI
Fri., September 20, 2013
For: Special Truck Tractors, Road
Tractors & Trailers
AuctionsComingTo view information on upcoming auctions visit our
Auction Calendar at www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 93
Page 94 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
More Than 400 Attend Chicago Cat Auction Services Sale
This Cat 320B excavator got the attention of JohnHagan of Landview Excavating.
(L-R): Jim Finlon, American Equipment LLC; Hank Spies, MiltonCAT; Tom Jamieson, Cat Auction Services; and Bart Rhea, BKBCMachinery, compare some notes prior to the start of the sale.
(L-R): Rich Evans, Cat Auction Services; Mike Farshchi,Capital Cement; and John Loftus, Patten CAT, discuss theauction prior to the start of the sale.
Luke Mueller (R), Patten CAT, shows the Cat iron at the saleto Don Cook of Cook Equipment Co.
Rick Albin, president, Cat Auction Services, withMacAllister Machinery Co. Inc.’s L.T. Miller and UsedEquipment Manager Billy Campbell.
Larry O’Neill (L), Patten Cat, welcomes LarryLindahl of Lindahl Brothers to the July 31auction.
Terry North (L), Patten CAT, used equipmentmanager, answers some questions about thesale from Mike Goffinet, Goffinet Equipment.
Old friends Richard Longbottom (L), CaterpillarInc,. and Dean Adsit, Nortrax, got a chance tocatch up at the auction.
Looking over this Cat 314CL is Paul Hagan ofLandview Excavating.
Dan Plote, president of Plote Construction Inc.,with Garrett Patten, president, Patten CAT.
More than 400 people attended the Patten CAT host-ed Cat Auction Services sale on July 31 inChicago, Ill.
Approximately 30 percent of the equipment was sold toonline buyers at the $5 million auction.
(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 95
FOR SALE NOW AT IRONPLANET:
California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2013 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions you can trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.
GO TO WWW.IRONPLANET.COM/CRANES FOR A COMPLETE LIST OF UNITS SELLING
FOR SALE NO
:ONPLANETT IRW A AT IRFOR SALE NO
2006 TAmerican HC-110
xere2006 T TereAmerican HC-110
T555-1x Rere2012 T Tererain Craneerough T TerR
-100.15Tx Rere2011 T Tererain Craneerough T TerR
e TMS700Ev2007 Grok Craneucrdraulic THy
e TMS700Ek Crane
2006 LieTM-1055-3.1L
rherb2006 LieTM-1055-3.1
rherb2006 LieTM-1040-2.1LT
x/Demagere2003 T TereC-80-2A
rherb2002 Lie-1100/2LMTT-1100/2
r
2000 TA
x/Demagere0 T TereC-100 LA
oy Bnapmon Coitcua AinrofilaCecnarsus AdalCnoIr ® cud An a
ONPLANET.IRO WWWGO T
xere2005 T TereAmerican HC-80
t tcejbut snempiuq. Eetao dt tsiy lranimiler. P58795207d #ntsurn tau cos ynoitc ® Pnorf Is okrae mcivred seretsigee rr a
.COM/CRANES FOR A COMPLETE LIST OF UNITS SELLINGLANETT.COM/CRANES FOR A COMPLETE LIST OF UNITS SELLING
1980 Manitowoc 3900 w/ler Cranewttice-Boom CraLa
il Rl. Acn, ItenalPnor3 I102-999t © 1hgirypo. Cegnaho ct tf ty otrepore phe trs adnard bns akrar mehtl ol. Acn, ItenalP
.COM/CRANES FOR A COMPLETE LIST OF UNITS SELLING
1977 American 11320ler Cranewttice-Boom CraLa
tenalPnor. Idevreses Rthg ®, .srenwe ovitcepser riehf t
.COM/CRANES FOR A COMPLETE LIST OF UNITS SELLING
1977 American 11320ler Crane
Page 96 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Thousands of Bidders Attend Ritchie Bros.’s Chicago Sale
In the cab of this Cat 385BL exca-vator is Joe Hession of HessionSewer Co.
Roger Allen of Allen Trucking tests the hydraulics of this Cat D8Ndozer.
Steve DeBaun, Track II Corp., askssome questions about the Cat doz-ers to Ben Arbeiter, Ritchie Bros.
Larry Lindahl, Lindahl Brothers Inc., heads out tothe auction yard to look at some of the Cat iron.
Bob O’Neal, O’Neal, Excavating &Construction looks over the Cat dozers atthe August 1 sale in Morris, Ill.
Bob Bazzetta (in cab) and Rob Carlson, both of West Side TractorSales Co., inspect this John Deere 450D excavator.
Running this Kobelco SK210 excavator is Dan Luepkes ofLuepkes Enterprises.
Matt Albright of Haynes Construction Co. looks overthis offset pull behind disc.
Discussing the prices at the sale are Dan Plote (L), president ofPlote Construction Inc., and Chad Cailteux of FinkbinerEquipment Co.
Tom Pattermann of Tom’s Equipment checks overthis Cat 345C.
More than 2,300 bidders participated online and in per-son at Ritchie Bros. Auctioneers’ multi-million dollarunreserved public equipment auction in Chicago, IL
on August 1, 2013.Bidders came from 48 countries, including 47 U.S. states.
More than 75 percent of the equipment was sold to out-of-statebuyers, from as far away as Chile, Korea, Poland and the UniteArab Emirates. Online bidders purchased more than 54 percentof the equipment sold (by dollar value).
In total, 1,500 equipment items and trucks were sold in theauction, including crawler tractors, excavators, wheel loaders,truck tractors and more.
(This story also can be found on Construction EquipmentGuide’s Web site at www.constructionequipmentguide.com.)
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 97
Phone: (315) 633-2944 • Fax: (315) 633-8010 • Syracuse, NY (Evenings) (315) 637-8912 www.lyonauctionlive.com
Sales Managers & Auctioneers, Inc.
ALEX
LYON & SON
SATURDAY, AUG. 17 @ 9:30 AM
NOTE: Canton Erectors has completed several jobs in the greaterNorthern Ohio area and will sell equipment and support that will notbe needed.
EARLY HILITES: 2 TRUCK CRANES: Terex 428 40 ton, 1998 Sterling 28 ton, CARRY DECKCRANES: Shuttlelift 3330, 4 HYDRAULIC EXCAVATORS: 2004 Cat 303CCR, 2007 JCB 8018, 2007JCB 8008, Bobcat 325, 2 TRACTOR LOADER BACKHOES: Case 590 Turbo (4x4), JD 310D, 2RUBBER TRACKED SKID STEER: 2007 Bobcat T250, 2007 JD CT322, 5 SKID STEERS: 2011 Cat236B, NH LX565, (2) 2005 Bobcat S300, 2005 Bobcat S250, 4 TELESCOPIC FORKLIFTS: (2) 2004Bobcat V518 Versa (4x4), 2003 JLG G6-42A, Gradall 524D-6 (4x4), 8 FORKLIFTS: 2009 CatGC40KS, 2004 Komatsu FG45T-2-8, Toyota GCF25, Mitsubishi FG35, Clark GCG25, Yale 6000lb.,Hyster E-80, Hyster S-30XL, 2 BOOM LIFTS: Genie S60 (4x4), Snorkel 41G, 10 SCISSOR LIFTS:(6) 2005 JLG 1930ES, (4) Stratolift MRX25, Hydromobile 15,000lb., 3 LOADER LANDSCAPETRACTORS: (3) 2011 Bobcat CT122, 13 WELDERS: (2) Lincoln SAE400, (2) Lincoln WP250, (2)Lincoln SA200, Lincoln LN25, Miller 8 Pack, Miller 452 Deltaweld, (4) Miller XME300, 3 LIGHTPLANTS: 2005 Terex AL4000, 2004 Allmand Night Lite, Allmand ML4CAOMXSV, 2 ARROW/ MES-SAGE BOARDS: (2) American Signal towable speed checkers, 2 BUCKET TRUCKS: 1995 Ford FSeries w/ Al-Tec WA600F, 1989 Ford F700 w/ Hi-Range 5FA48PBI, WATER TRUCK: 1992 Chevy2500 Cab & Chassis, 3 TRUCK TRACTORS: 2005 Peterbilt 357 (t/a), 2001 Freightliner Classic (t/a),1986 Ford LTL9000 (t/a), SERVICE TRUCK: 2000 Chevy 3500, STAKE TRUCK: 2006 Ford F350(4x4), CAB & CHASSIS: 2003 Ford F350 Super Duty (s/a), PICKUP: 2000 Ford F250, 3 EQUIP-MENT TRAILERS: 2005 Landoll 435 (t/a), 1986 Trailking 40ft. (t/aq), 1987 Fontaine FL735 35 ton,GOOSENECK TRAILER: 2006 Towmaster C-14LS 14ft. (t/a), STORAGE TRAILER: 40 ft.,OFFICE TRAILER: 40 ft., 2 DUMP BODIES: (2) New 9ft. Steel, 3 FLATBED BODIES: (2) New12ft., New 10ft., TUGGER: Allis Chalmers made into Snow Plow, ENGINE: Detroit 4.7 Diesel, 4CONTAINERS: (4) 2012 2 yd. Rear Load Straight Refuse Containers, RECREATIONAL & UTILI-TY VEHICLES: 2008 Bobcat 2200D (4x4), Yamaha 2 seat Golf Cart, CRANE ACCESSORIES:Various Lengths of Spreader Beams & I Beams, 4 PALLET JACKS: (2) Crown Electric, (2) Manual,FORKLIFT ACCESSORIES: (6) Battery Packs, (3) Forklift Chargers, SUPPORT EQUIPMENT:Pallets of Shop lights, Pallets of Clevises & Hooks, Banding Carts, Air Bumper Jack, Pallets of CableSlings, Floor Jacks, Job Boxes, Welding Carts, Shofer Lift-All Hoist, Oil Filters, Acetylene Hose, 7ft.Safe, Vermette Material Lifts, 2 ton Engine Hoists, Quantity of Crane Shieve Blocks, Air & AcetyleneHose, 2-4 ton Gantry Systems, Nitrogen Jacking System, Large Quantity of Tools: Hilti-MilwaukeeDemo Hammers- Core Drills- Screw Guns.
Address: 2009 Quimby SW Canton, OH 44706.
DIRECTIONS: From Akron/ Canton Regional Airport: I-77 S/ 9.7 miles, exit 104, merge onto US 30 W/ US-62 W towardMassillon 1.7 miles. Take OH-297 exit toward Raff Ave./ Whipple Ave. .3 mile. Right onto OH-297 N/ Raff Rd. SW .1 mile,first right onto 17th St. SW/ Southway St. SW .5 mile, continue to follow 17th St. SW. Right on Quimby Ave. SW. Site will beon left.
SALE SITE PHONE: (863) 660-4811OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989
MAJOR JOB COMPLETION AUCTIONCRANES, FORKLIFTS, SKID STEERS, WELDERS,LIGHT PLANTS, SUPPORT EQUIPMENT, TRUCKS
& TRAILERS
AUCTIONCANTON,
OHIO
THURSDAY, SEPT. 12 @ 9:30 AM
NOTE: Selling in this sale will be the former assets ofAshtabula Metal & Iron.
EARLY HILITES: RECYCLING EQUIPMENT:2006 Colmar SB6200-800 Metal Shear & Baler, PiranhaShear, Striptic Shear, 2001 Hammer Mill w/ 100ft. BeltFeeder-Shaker Tables-Radial Stacker, Horizontal Baler, Small Capacity of Balers, CanPak CD500 Aluminum Can Compactor, 12ft. x 3ft. Shaker Table, Powerpac Conveyor,Wire Stripper, ROUGH TERRAIN CRANES: P&H R150, 4 SKID STEERS: Cat226B, Case 1845C, NH LS180, NH LS170, 6 FORKLIFTS: Cat DP80, Cat 50, Hyster60, Yale GLC5050TF, Yale GLC5050T, Yale 5,000lb., WELDERS: Miller Big 40,SCREENING PLANT: Thomas TS400, 4 MAGNETS: 72in. Copper, 60in.-48in.Ohio, 38in. Copper, 3 SCALES: 10ft. x 80ft. 100K Truck Scale, 8ft. x 6ft. 10,000lb.Platform Scale, 4ft. x 4ft. 5,000lb. Platform Scale, ROLLBACK TRUCKS: 1992Int’l. 4600 (s/a), ROLLOFF TRUCKS: 1994 Kenworth (tri.), DUMP TRUCK: 1986Ford 9000 (s/a), 2 TRUCK TRACTORS: 2001 Sterling (t/a), 1984 Mack R686ST(t/a), STAKE TRUCK: 2002 Ford F350, LUGGER TRUCK: 2001 Mack DM690S(tri.), 2 CONTAINERS: (2) 40ft., 90 ROLLOFF CONTAINERS: (4) 80yd., (11)60yd., (22) 40 yd., (11) 30yd., (19) 25 yd., (20) 20yd., (3) 10yd., 22 LUGGER CON-TAINERS: (3) 18yd. (6) 15yd., (8)12yd, (3) 10yd., (2) 8yd., 2 FLATBED TRAIL-ERS: Fontaine 48ft. (t/a), Hawks 48ft. (t/a), DETACHABLE GOOSENECKTRAILER: 1996 Interstate 60 ton (tri.), 3 DUMP TRAILERS: 2004 Ace 34ft. (t/a),Cobra 34ft. (ta), 1992 Ravens 32ft. (t/a), 3 VAN TRAILERS: 1996 Strick 53ft. (t/a),1996 Pines 53ft. (t/a), Great Dane 53ft. (t/a), NEW & USED TIRES: (15) UnusedRecaps, STEEL SHEARS: LaBounty Linkage Shear, ATTACHMENTS: Grapples:2006 Labounty 3 over 2 Grapple, 4 Tine Peel Scrap Grapple, Skid Steers: Bradco 9HDBackhoe, 4-in-1 Bucket, Custom N=Built Plow Frame, SUPPORT EQUIPMENT:(19) 3yd.-1/2yd. Steel Dump Hoppers, Forklift Ramp, Very Large Quantity of ShopEquipment, Quantity of Chains, Binders, Trailer Tarp Bows.
OHIO LICENSE #: 63199360809, OHIO AUCTIONEER LICENSE #: 62199360989
COMPLETE LIQUIDATIONFORMER MAJOR SCRAP COMPANY
APPROXIMATELY 100 ROLLOFF & LUGER CONTAINER,ROLLOFF TRUCKS, LUGER TRUCK, SKID STEERS,
FORKLIFTS, BALER, SCALE SYSTEMS AND VERY LARGEAMOUNT OF SUPPORT EQUIPMENT
Canton Erectors
AUCTIONASHTABULA,
OHIO
Ashtabula Metal & Iron
Page 98 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
The HistoricalConstruction EquipmentAssociation (HCEA), a501(c)3 non-profit organiza-tion dedicated to preservingthe history of the construc-tion industry, is hosting its28th Annual InternationalConvention and OldEquipment Exposition, to beheld Aug. 16 to 18, 2013, atthe International Union ofOperating Engineers’ Local150 Apprenticeship and SkillImprovement ProgramCenter, 19800 West ArsenalRoad, east of Wilmington, Ill.Wilmington is roughly 60mi. southwest of Chicago,and 20 mi. south of Joliet. The show features demonstrations
and displays of horse-drawn, steam,gas and diesel-powered antique con-struction machinery, cable andhydraulic shovels and cranes, hit andmiss engines, antique trucks and trac-tors, and more.
The center is home to a pair of fullyrestored and operable Erie B steamexcavators — a shovel and a crane.These will be the featured machinesfor the show.The show is open to the general
public. Anyone involved with con-
struction, mining and dredg-ing equipment is especiallyencouraged to attend, sothey can observe the ances-tors of today’s machinery inaction. The last HCEAshow, which was held inSeptember 2009 in BowlingGreen, Ohio, featured morethan 330 exhibits and drewsome 5,000 attendees fromaround the world.Show hours are Friday,
9:00 to dusk; Saturday, 9 to5; Sunday, 9 to 3.Admission per person 12 orover is $8.00 daily, or$15.00 for a weekend pass.Free admission for Local150 members and children
under 12. For more information, call 419/352-
5616 or visit www.hcea.net. (This story also can be found on
Construction Equipment Guide’s Website at www.constructionequipment-guide.com.)
HCEA Annual International ConventionWill Feature Demos, Displays of Antiques
The show features demonstrations and displays ofhorse-drawn, steam, gas and diesel-powered antiqueconstruction machinery, cable and hydraulic shovelsand cranes, hit and miss engines, antique trucks andtractors, and more.
The shadow market is generallydefined as the homes that are inforeclosure, but not on the market,or homes that the bank or mort-gage provider has taken back butis holding until the marketimproves.“There has been some suspi-
cion that whoever is holding prop-erty is hanging onto them, waitinguntil prices improve or until theyfeel comfortable with the loss theywill take,” said David Crowe,chief economist of the NationalAssociation of Homebuilders. “They were waiting to claim
that loss on their balance sheetwhen their balance is stronger.The concern is that there are thesehouses are out there in never-never land. The uncertainty is theworst part. My take is that theseare not huge threats to the housingmarket, particularly not now.Whatever concern there wasabout the shadow and how itcould affect the market is dissipat-ing.” Along with the decline in the
shadow inventory is news thatcompleted foreclosures in May2013 numbered 51,000, downfrom 71,000 in May 2012 , “ayear-over-year decrease of 27 per-cent, CoreLogic said.“The stock of seriously delin-
quent homes, which is the maindriver of shadow inventory, is atthe lowest level since December2008, said Mark Fleming, chiefeconomist of CoreLogic.“We continue to see a sharp
drop in foreclosures around thecountry and with it a decrease in
the size of the shadow inventory.Affordability, despite the rise inhome prices over the past year,and consumer confidence are bigcontributors to these positivetrends,” said Anand Nallathambi,president and CEO of CoreLogic.“We are particularly encouragedby the broad-based nature of thehousing market recovery so far in2013.”For the construction industry
that means less competition fromexisting houses, and more con-tracts, more jobs and more sales
of equipment as more new homesare built, said Crowe. “Reduced competition from
shadow inventory means moreconstruction in new homes andwe estimate that 100 new singlefamily homes generates 300 addi-tional jobs,” Crowe said.Construction equipment manu-
facturers are seeing the positiveeffects, too, said Dennis Slater,president of the Association ofEquipment Manufacturers. “My central message is we feel
good about it,” Slater said. “If you
look at the sales numbers by con-struction equipment manufactur-ers as a whole, they are reportinggood numbers.”But while the news is good, it
could be better, Slater said.The U.S. Congress’s inability
to pass critical legislation is creat-ing market uncertainty.“With the uncertain economic
conditions, particularly with thelack of funding for the highwaybill, contractors would be lesslikely to buy equipment at all,”Slater said. “One option would beto rent because they don’t havethe long term commitment. Theyaren’t comfortable that they havejobs beyond the current horizon.“So I think what you have is the
housing market is a good story,but I think the market uncertaintycreated by Congress does dampenthat optimism. We are positive,but it could be a better story.”
(This story also can be found onConstruction Equipment Guide’sWeb site at www.construc-tionequipmentguide.com.) CEG
HOUSING from page 1
“So I think what you have is the housing market is a goodstory, but I think the market uncertainty created by Congressdoes dampen that optimism. We are positive, but it could bea better story.”
Dennis SlaterAssociation of Equipment Manufacturers
Drop in Foreclosures Lowers Competition, Adds Industry Jobs
Col. Raymond S. Henry - WI Lic. # 2490-52; MN Lic. # 05-13-001Real Estate Auctioneer & GPPA Certified Equipment Appraiser
or Email [email protected]
Accepting Excavators, Dozers, Loaders,Semis, Trucks,
Trailers and Related Equipment!
For a complete list of our upcoming auctions visit www.iraymn.com
Jct MN Hwy 95 & 25 Foley, MN
Accepting Consignments Until Noon on Saturday, September 7th, 2013
‘07 John Deere 350D LCMeter Reads 6234 Hrs, JD6020H Engine, 271 Hp,32” Tracks in Good Condition, 2.15 Yd Rock Bkt, UC Good Cond, Heated Cab, A/C, 12’ 6” Stick, Aux Hyd, One Owner
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 99
2005 REXCON S
CAT AUCTION SERVICES860 Blue Gentian Road, Suite 100 Eagan, MN 55121
855.228.2286 [email protected]
Follow the new leader.®
www.catauctions.com
Equipment subject to change. View updated equipment lists at www.catauctions.com
2005 GUNTERT & ZIMMERMAN S850 QUADRA
2012 LINK BELT RTC80130 SERIES II
2001 MANITOWOC 222 SERIES B
Online Bidding Available!Can’t join us in Albuquerque? Visit www.catauctions.com to learn more and register to bid online.
©2013 Caterpillar. All Rights Reserved. CAT, CATERPILLAR, their respective logos and “Caterpillar Yellow,” as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
THURSDAY, SEPT. 19 & FRIDAY, SEPT. 20 9AM MOUNTAIN TIME 5801 Bobby Foster Rd SE Albuquerque, NM 87106SITE PHONE/PARA ESPAÑOL: 505-515-3963
ALBUQUERQUE NMSEPT. 19 & 20, 2013
COMPLETE DISPERSAL
UNRESERVED PUBLIC AUCTION
www.catauctions.com
After 86 years in business, A.S. Horner, Inc. has decided to retire and close the business. Join us for the Complete Dispersal of all company assets. Search the full equipment listing and register to bid online at:
OFFICE & WAREHOUSE AVAILABLE FOR SALE!FOR MORE INFORMATION, PLEASE CONTACT:
Jim Wible CCIM [email protected] · 505.400.6857
Keith Meyer CCIM, SIOR [email protected] · 505.715.3228
Additional equipment available in Las Cruces, NM upon job completion. Keep checking www.catauctions.com for more information.
OVER 600 LOTS!
2 DAYS!
ERSERNU
PEDVER
ACIBLU P
ONITCU A
ERSERNU
!SAYD
PEDVER
!
ACIBLU P
ONITCU A
!SAYD2
!
!STOL600
EROV
ARAP/EONHPETIStsoy Fbbo1 B058
TTANUO MMA9 S,Y,AAYSDRUHT
LPOMC
505-515-3963:LOÑAPS EAqurequublAEd Sr Ret
EMITNIAADIR F &9 1.TPE S
SIDETEL
505-515-39636017 8M N,equ
0 2.TPE S,YAAY
LASERPS
!STOL
Search the full equipment listing and register to bid online at:
n
the business. Join us for the Complete Dispersal of all company assets. After 86 years in business, A.S. Horner
.catauctions.comwwwepmiul eqanoitiddA
Search the full equipment listing and register to bid online at:
in Las Cruces, NM upon job completion.
the business. Join us for the Complete Dispersal of all company assets. After 86 years in business, A.S. Horner
.catauctions.comelbaliavt an
Search the full equipment listing and register to bid online at:
in Las Cruces, NM upon job completion.
the business. Join us for the Complete Dispersal of all company assets. , Inc. has decided to retire and close After 86 years in business, A.S. Horner
.catauctions.com
Search the full equipment listing and register to bid online at:
in Las Cruces, NM upon job completion.
the business. Join us for the Complete Dispersal of all company assets. , Inc. has decided to retire and close
.catauctions.com
W &CEIFFO
ESUOHERA W
to learn more and register to bid online.
www
Can’t join us in Albuquerque? Visit
Online Bidding
Keep checking nepmiul eqanoitiddA
to learn more and register to bid online.
for more information.
Can’t join us in Albuquerque? Visit
Online Bidding
.catauctions.comwww in Las Cruces, NM upon job completion. elbaliavt an
to learn more and register to bid online.
for more information.
.catauctions.comwwwCan’t join us in Albuquerque? Visit
vailable!A
in Las Cruces, NM upon job completion.
.catauctions.com
in Las Cruces, NM upon job completion.
acpstog@reyemthiekM, SICCerye MhtiKe
moc.ecapsto@gmwijMCICelib WimJ
OITAMROFN IEROMROF
FELBALIAVA W &CEIFFO
28235.175.0 5·moc.eacROIM, S
5786.004.50 5·
:TCATNOCESAEL, PNO
!ELASROFESUOHERA W
.catauctions.comwwwFollow the new leader
are trademarks of Caterpillar and may not be used without permission.. All Rights Reserved. CA©2013 Caterpillar
.catauctions.com
®.Follow the new leader
are trademarks of Caterpillar and may not be used without permission.ellowTERPILLAR, their respective logos and “Caterpillar Y, CATT, CA A AT
860 Blue Gentian Road, Suite 100 855.228.2286
,” as well as corporate and product identity used herein, ellow
860 Blue Gentian Road, Suite 100 ER SONTICUAT CAAT
855.228.2286
Eagan, MN [email protected]
,” as well as corporate and product identity used herein,
CESVIER Eagan, MN 55121
wwwequipment lists atEquipment subject to change.
.catauctions.comwwwiew updated VEquipment subject to change.
Page 100 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
Road Institute Releases 2013-2014 Training ScheduleRoad Institute has released its 2013 - 2014 training schedule for road
building industry professionals. The course curriculum offers two- tofive-day training sessions beginning mid-October and continuingthrough May 2014, with training in Chambersburg, Pa., and Phoenix. Road Institute sessions cover a wide variety of focus areas, including
asphalt paving and compactor training, and are designed to help atten-dees garner the most from their equipment on every application, with abalance of classroom-style instruction and hands-on learning. Instructors at the Road Institute bring nearly 50 years of combined
teaching and field experience in a multitude of compaction and pavingprojects that span the globe. “We work to combine the firsthand knowledge our instructors have
received over the years to each course, but also, the insights and tips thatthousands of students have shared with us and one another,” said WadeTurlington, director of product and sales education. “These combinedlessons help us reach our goal of ensuring every attendee walks awaywith the ability to take a smarter approach to every application movingforward. The combined classroom-style and hands-on learning ensuresstudents have an opportunity to apply the knowledge they gain, andaddress any questions that may arise as they apply new knowledge in thehands-on learning sessions.” Courses are offered in asphalt paver and compactor operation mainte-
nance and applications; screed operation; soil compaction operations;and automatic grade and slope control systems. Topics in each sessionrange from daily and weekly maintenance to the operation and applica-tion of asphalt paving. Safety — a core value of Volvo — is a key com-ponent of the instruction in each course.“I have nearly 20 years of paving and compacting experience, and I
took away so many lessons that I’ve been able to apply on our jobs thathave helped us operate more efficiently, more safely — and — haveallowed us to deliver higher quality jobs,” 2013 Road Institute studentMike Escher, owner of M.C.E. Dirtworks, said. “The most valuable thingis that the instructors don’t speak from a podium, they have firsthandexperience with the challenges that can come up on paving and com-paction jobs — from traffic control to compacting cul-de-sacs — andthey apply that to their instruction.” Class size is limited for ideal instructor-to-student ratios and team
learning. Tuition is $750 per student per three- to five-day course, or$500 for two-day seminars. Registration and hotel information is available online at roadinsti-
tute.com. A 20 percent discount will be given to those who register bySept. 30 for all classes held October through December. For more information on the Road Institute or to register for classes,
visit roadinstitute.com. (This story also can be found on Construction Equipment Guide’s Web
site at www.constructionequipmentguide.com.)
China Bans Constructionof Government Buildings forFive YearsBEIJING (AP) China’s leaders have
banned the construction of governmentbuildings for five years as another step in afrugality drive that aims to calm public angerat corruption. The general offices of the Communist
Party’s central committee and China’sCabinet jointly issued the directive July 23,according to the official Xinhua NewsAgency. No directive was immediatelyavailable online. Across China, grand government build-
ings with oversized offices and fancy light-
ing have mushroomed in many cities. Theyare often among the most impressive build-ings in their own towns, drawing disap-proval from the public. President Xi Jinping has spearheaded a
campaign to cut through pomp, formalityand waste among senior officials that havealienated many ordinary citizens. This year, high-end restaurants have
reported a downturn in business as govern-ment departments and state-owned compa-nies canceled banquets.
Xinhua reported that the directive ordersan “across-the-board halt’’ to construction ofofficial buildings, and “glitzy” structuresbuilt as training centers, hotels or govern-ment motels. Some government agencieshave built such buildings in seaside resortsand other scenic spots as a perk for their offi-cials and employees who can stay for free orat deeply discounted prices. They sometimesopen to the public as profit-making ventures. Xinhua said the directive noted that some
departments and localities have built govern-
ment office compounds in violation of regu-lations, which has tainted the image of theCommunist Party and the government andstirred vehement public disapproval.It added that the directive calls on party
and government bodies to be frugal andensure that government spending goestoward developing the economy and boost-ing living standards.
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
Automatic Grade and Slope Systems
• March 18 - 20, 2014, Chambersburg, Pa.
Grader Hydraulic and Electric Systems (Step 1)
• April 28 - May 2, 2014, Chambersburg, Pa.
Large Asphalt Compactor Mechanics (Step 1)
• Nov. 5 - 7, 2013, Chambersburg, Pa.
• Jan. 28 - 30, 2014, Chambersburg, Pa.
Large Asphalt Compactor Mechanics (Step 2)
• April 15 - 17, 2014, Chambersburg, Pa.
MT2000 Hydraulic and Electrical Systems (Step 1)
• Dec. 9 - 13, 2013, Chambersburg, Pa.
• Jan. 6 - 10, 2014, Chambersburg, Pa.
• Feb. 24 - 28, 2014, Chambersburg, Pa.
MT2000 Hydraulic and Electrical Systems (Step 2)
• April 8 - 10, 2014, Chambersburg, Pa.
MW500 Hydraulic and Electrical Systems (Step 1)
• Nov. 19 - 21, 2013, Chambersburg, Pa.
Paver and Compactor Operation and Maintenance
• Oct. 15 - 18, 2013, Chambersburg, Pa.
• Nov. 5 - 8, 2013, Phoenix
• Dec. 10 - 13, 2013, Phoenix
• Jan. 7 - 10, 2014, Phoenix
• Jan. 14 - 17, 2014, Phoenix
• Feb. 11 - 14, 2014, Phoenix
• March 11 - 14, 2014, Phoenix
• April 8 - 11, 2014, Phoenix
• May 6 - 9, 2014, Chambersburg, Pa.
• May 13 - 16, 2014, Chambersburg, Pa.
Paver and Compactor Operation and Maintenance,
Warm-mix Asphalt
• Nov. 12 - 15, 2013, Phoenix
• Jan. 28 - 31, 2014, Phoenix
• Feb. 18 - 21, 2014, Phoenix
• March 25 - 28, 2014, Phoenix
• April 22 - 25, 2014, Chambersburg, Pa.
Paver Hydraulic and Electrical Systems — Blaw-Knox
Pavers (Step 1)
• March 31 - April 4, 2014, Chambersburg, Pa.
Paver Hydraulic and Electrical Systems — P7000-Series
Pavers (Step 1)
• Jan. 20 - 24, 2014, Chambersburg, Pa.
• Feb. 24 - 28, 2014, Chambersburg, Pa.
• March 17 - 21, 2014, Chambersburg, Pa.
Paver Hydraulic and Electrical Systems — P7000-Series
Pavers (Step 2)
• March 11 - 13, 2014, Chambersburg, Pa.
Paver Hydraulic and Electrical Systems — PF6000-
Series Pavers (Step 1)
• Feb. 3 - 7, 2014, Chambersburg, Pa.
Paver Screed Operation and Adjustment
• Nov. 19 - 21, 2013, Chambersburg, Pa.
• Feb. 4 - 6, 2014, Chambersburg, Pa.
• Feb. 25 - 27, 2014, Chambersburg, Pa.
• April 1 - 3, 2014, Chambersburg, Pa.
Paving and Compaction Application Seminar
• Dec. 17 - 18, 2013, Chambersburg, Pa.
• Jan. 22 - 23, 2014, Chambersburg, Pa.
• April 29 - 30, 2014, Chambersburg, Pa.
Small Asphalt Compactor Mechanics (Step 1 and 2)
• Nov. 19 - 21, 2013, Chambersburg, Pa.
• Feb. 11 - 13, 2014, Chambersburg, Pa.
• April 22 - 24, 2014, Chambersburg Pa.
Soil Compaction Application Seminar
• Oct. 29 - 30, 2013, Chambersburg, Pa.
• May 20 - 21, 2014, Chambersburg, Pa.
Soil Compactor Mechanics (Step 1)
• Oct. 29 - 31, 2013, Chambersburg, Pa.
• Jan. 14 - 16, 2014, Chambersburg, Pa.
Soil Compactor Mechanics (Step 2)
• March 25 - 27, 2014, Chambersburg, Pa.
Road Institute 2013–2014 Course Schedule
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 101
Tax Relief in Sight…
Sandherr Issues Positive Statement on New CoalitionThe chief executive officer of the
Associated General Contractors of America,Stephen E. Sandherr, issued the followingstatement in reaction to the launch of thenew Coalition for Fair Effective Tax Rates.The association is a founding member of thenew coalition, which will work to ensure thatcomprehensive tax reform efforts focus onlowering the effective corporate tax rates —what firms actually pay in total federal taxes.“The launch of this new coalition will
help bring needed tax relief to a constructionsector that currently pays the highest effec-tive corporate tax rate of any industry type.That relief can’t come soon enough as thehard-hit construction industry pays an effec-tive corporate tax rate of 31 percent, thehighest level in the economy and more thandouble the rate some sectors pay, accordingto the most recent analysis by the U.S.Department of the Treasury.“Given federal officials’ repeated insis-
tence on wanting to put in place policies toboost employment levels, it is hard to under-
stand why our tax policies discriminateagainst the labor-intensive constructionindustry. Fortunately, members of Congresshave an opportunity to address the disparityamong effective rates as they undertakebroader, comprehensive tax reform. Thesereform efforts need to focus on, and ulti-mately lower, the effective corporate tax rateemployers actually pay, instead of the osten-sible, pre-deductions, corporate rate that is sooften cited.“In addition to serving as a founding
member of this new coalition, the AssociatedGeneral Contractors of America will contin-ue to work with federal officials to educatethem about the disproportionate tax burdenimposed on construction employers andwork to promote the kind of tax relief need-ed to encourage more growth in constructionemployment.”
(This story also can be found onConstruction Equipment Guide’s Web site atwww.constructionequipmentguide.com.)
UPCOMING PREMIER IRON EVENTS
It’s all in the Marketplace
COM
ROME, NYLive Auction: light duty trucks, construction equipment & more
J.J. KANE AUCTIONEERSwww.proxibid.com/JJKane
SAN BERNARDINO, CALive Auction: government surplus, vehicles, construction equipment, commercial trucks, trailers & more
BAR NONE AUCTIONwww.proxibid.com/BarNone
PRO TEAMwww.proxibid.com/ProTeam
WHITE PINE, TNLive Auction: farm tractors & machinery, excavators, backhoes, dozers, lifts, loaders, cranes, trucks, trailers & moreImage for representational purposes only.
August 24 | 9:00am ET August 24 | 8:30am PT September 7 | 9:00am ET
CCOM
Cop
yrig
ht ©
201
3 P
roxi
bid
Inc.
All
Rig
hts
Res
erve
d
Page 102 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE
ADVERTISER INDEX
The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.
A E D ..............................................................................................39
ALEX LYON & SON INC
CANTON OH 8/17 ASHTABULA OH 9/12 ..............................97
ALEX PARIS CONTRACTING CO INC ..........................................9
ALLU GROUP ................................................................................43
AMERICAN STATE EQUIPMENT ....................................................7
ARING EQUIPMENT CO INC ........................................................15
ASC CONSTRUCTION EQUIP USA..........................................10,11
BANDIT INDUSTRIES INC ............................................................79
BARGAINS ................................................................................89,90
BLANCHARD MACHINERY INC ....................................................37
BOBCAT ENTERPRISES................................................................24
BRAMCO-MPS................................................................................82
CAT AUCTION SERVICES
ALBURQUERQUE NM 09/19 ................................................99
CEG SCALE MODELS....................................................................33
CHICAGO PNEUMATIC..................................................................45
CK POWER ....................................................................................24
CLASSIFIEDS ................................................................................88
COMPANY WRENCH ....................................................................31
CONEXPO ......................................................................................30
CONSTRUCTION EQUIPMENT GUIDE..........................26,38,64,68
DOOSAN INFRACORE AMERICA CORP ................................52,53
DOOSAN PORTABLE POWER ......................................................48
DOPPSTADT ..................................................................................80
DYNAPAC........................................................................................50
EAGER BEAVER TRAILERS..........................................................61
ERB EQUIPMENT ..........................................................................13
EXODUS MACHINES ................................................................74,75
FABCO EQUIPMENT INC ................................................................2
FARM-RITE EQUIPMENT INC..........................................................8
FELLING TRAILERS ..................................................................56,57
FINKBINER EQUIPMENT CO ..........................................................7
FLANGE LOCK ..............................................................................35
FLUID CONTROL SERVICES ........................................................39
GARY CARLSON EQUIPMENT......................................................23
GRINDERCRUSHERSCREEN.COM..............................................84
GROVE WORLDWIDE (CRANE ) ..................................................69
HOWELL TRACTOR & EQUIPMENT CO ..............................45,104
HYDRAULICIRCUIT TECHNOLOGY..............................................45
ICUEE..............................................................................................18
ILLINOIS TRUCK & EQUIPMENT ....................................................3
IRAY AUCTION
FOLEY MN 9/13......................................................................98
IROCK CRUSHERS........................................................................78
IRON PLANET
CRANE AUCTION 9/12 ..........................................................95
JEFF BELZERS CHEVROLET ..................................................59,62
JJ SCHECKEL CORP ....................................................................35
JOHN DEERE ..............................................................................103
KAWASAKI CONSTRUCTION MACHINERY ................................47
KLEEMAN ......................................................................................77
KOBELCO CONST MACHINERY ..................................................25
KOHLS WEELBORG ......................................................................62
KOMATSU AMERICA CORP............................................16,17,70,71
KPI-JCI ............................................................................................87
KUBOTA ..........................................................................................49
LEADING EDGE ATTACHMENTS INC ..........................................44
MCCANN INDUSTRIES INC ............................................................6
METSO MINERAL CRUSHING ......................................................83
METSO MINERAL SCREENING ....................................................86
MID COUNTRY MACHINERY ........................................................22
MIDWEST VIBRO INC ....................................................................39
MOBILE TRACK SOLUTIONS........................................................35
MUSTANG MFG..............................................................................67
NATIONAL ATTACHMENTS............................................................43
NORAM ..........................................................................................51
POWERSCREEN MW DEALER ....................................................85
PROXIBID ....................................................................................101
PURPLE WAVE INC
INTERNET AUCTION 08/21 ..................................................93
RANSOME EQUIPMENT SALES LLC............................................91
RDO EQUIPMENT/SCHARBER EQUIPMENT ..............................27
RITCHASON AUCTIONEERS
LEBANON TN 09/21 ............................................................101
ROAD BUILDERS MACHINERY & SUPPLY ..............................6,29
ROGERS BROTHERS CORP ........................................................65
ROLAND MACHINERY INC..............................................................5
RTL EQUIPMENT INC ....................................................................78
RUFFRIDGE-JOHNSON EQUIPMENT CO ..................................82
SCHAEFER ENTERPRISES ..........................................................44
SENNEBOGEN ..............................................................................81
SIDUMP’R ......................................................................................60
SMITHCO ........................................................................................65
STAR EQUIPMENT LTD ..................................................................6
SUPERIOR INDUSTRIES ..............................................................84
TEREX CRANES ............................................................................46
THE G W VAN KEPPEL CO ..........................................................19
TITAN RENTS ................................................................................37
TOWMASTER INC ........................................................................63
UNITED RENTALS..........................................................................32
WANTED ........................................................................................91
WHAYNE SUPPLY CO....................................................................43
ZIPS TRUCK EQUIPMENT ............................................................62
To read articles about these CEG advertisers, visit www.constructionequipmentguide.com
CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • August 17, 2013 • Page 103
IT’S GOT YOUR FINGERPRINTS ALL OVER IT.
Like all of our equipment, the850K was designed with exten-sive input by owners and oper-ators like you. We listened andresponded with numerous K-Series enhancements, includ-ing additional power and weightfor increased productivity. AnEPA Interim Tier 4 diesel enginefor work in nonattainmentareas. Spacious redesigned cabthat’s noticeably quieter andmore comfortable. And best-in-class serviceability features,such as an innovative easy-to-clean “V-Cool” package. Add tothose, the unsurpassed operat-ing ease and maneuverabilityoperators have come to expectfrom our crawlers, and the850K is an obvious choice. To get your hands on one, see your John Deere dealer.
Saginaw4600 AIS DriveP.O. Box 253
Bridgeport, MI 48722989/777-0090
Fax: 989/777-1583
Grand Rapids600 44th Street S.W.Grand Rapids, MI
49548616/538-2400
Fax: 616/538-0449
Northeast Detroit65809 Gratiot AveLenox, MI 48050
586/727-7502Fax: 586/727-7311
West Detroit56555 Pontiac TrailNew Hudson, MI
48165 248/437-8121
1-800/457-8121
Traverse City8300 M-72 EastWilliamsburg, MI
49690231/267-5060
Fax: 231/267-5257
Naperville, IL 60563630/355-7150
Fax: 630/355-7173
Rockdale, IL 60436815/730-9011
1-800/937-3355Fax: 815/730-9036
Rockford, IL 60012815/961-3160
Fax: 815/965-1810
South Holland, IL60473
708/331-6362Fax: 708/331-7334
Wauconda, IL 60084847/526-7700
Fax: 847/526-3565
Bloomington, IN 47403812/333-9677
Fax: 812/333-9731
Fort Wayne, IN 46825260/482-8576
Fax: 260/483-4057
Indianapolis, IN 46219317/544-3411
Fax: 317/544-3420
Lafayette, IN 47905765/447-6933
Fax: 765/448-9038
South Bend, IN 46619574/232-1461
Fax: 574/233-3324
Des Moines, IA800/822-2212
Fort Dodge, IA800/362-2487
Sioux City, IA800/352-4693
Waterloo, IA800/772-2019
Dodge City, KS800/794-0172
Great Bend, KS800/264-4056
Park City, KS800/262-0139
Topeka, KS800/279-6087
Ulysses, KS800/472-9238
Kansas City, MO888/306-3434
Springfield, MO888/306-2656
Gering, NE800/205-6784
Grand Island, NE800/868-4017
Lincoln, NE800/416-5518
North Platte, NE800/894-7060
Omaha, NE800/416-5095
Brunswick, OH800/716-9796
Cambridge, OH 740/439-2747
Canton, OH866/235-0438
Chillicothe, OH 740/663-5300
Cincinnati, OH800/844-3734
Columbus, OH800/222-2010
Lima, OH800/423-7445
Painesville, OH866/800-1398
Poland(Youngstown), OH
866/503-7259
Vandalia (Dayton),OH
800/233-4228
Cranberry Twp, PA724/776-3636
Delmont, PA724/837-4500
Ashland, WI715/682-5522
Chippewa Falls, WI715/834-2924
Monico, WI715/487-5583
Mosinee, WI715/693-3820
Duluth, MN218/722-7456
Bemidji, MN218/759-1996
Grand Rapids, MN218/326-9427
Escanaba, MI906/789-9054
Louisville, KY502/253-3721
Richmond, KY859/623-2030
Bowling Green, KY270/842-3400
London, KY606/862-8447
www.westsidetractorsales.com www.murphytractor.com
,
D
2
a
E
,
Page 104 • August 17, 2013 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE