The LRL550B-SS Combination Solid State/KlystronMicrowave Training System.

Microwave Training KitX-Band

8.20 Ghz - 12.40 Ghz

5 ExperimentsLesson Plan:Introduction A Brief Discussion of Transmission Line TheoryExperiment 1 Measure of PowerExperiment 2 Measurement of Standing Wave RatioExperiment 3 Measurement of Frequency and WavelengthExperiment 4 Propagation of MicrowavesExperiment 5 Microwave Antennas

Kit

1 2K25 Klystron (LRL-723)1 Frequency Meter (LRL-504)1 Slotted Line (LRL-505)2 Variable Flap Attenuators (LRL-506)1 Termination (LRL-507)1 Thermistor Mount (LRL-508)1 Power Supply (LRL-510A)3 Cables RG-58 BNC to BNC Male (LRL-515)1 Detector Mount (LRL-518)4 Waveguide Stands (LRL-523)2 Horn Antennas (LRL-531)1 Shorting Plate (LRL-532)2 Bags of 8/32 Screws and Nuts1 Training Manual (LRL-530A)

Contents 1 Klystron tube mount (LRL-503A)

The Importance of global communicationsHas never been greater and in many cases, microwave

technology is the answer. This results in a need for more engineers, technicians and technical managers trained in microwave technology.

The LRL550B-A-SS provides everything needed to teach both Solid State andKlystron microwave theory. Each training system includes a 47 pages Lab Manualthat translate theory into application through5 classroom experiments.

15 Experiments

Introduction A Brief Discussion of Transmission Line TheoryExperiment 1 Measurement of PowerExperiment 2 Measurement of Standing Wave RatioExperiment 3 Measurement of Frequency and WavelengthExperiment 4 Measurement of Impedance Experiment 5 AttenuatorExperiment 6 Klystron CharacteristicsExperiment 7 Microwave TunerExperiment 8 Directional CouplerExperiment 9 Series Tees and Shunt TeesExperiment 10 Detector and MixersExperiment 11 Reflection LossExperiment 12 Propagation of MicrowavesExperiment 13 Microwave AntennasExperiment 14 Solid State oscillatorExperiment 15 On your own

Lesson Plan:

The LRL550B-SS provides everything needed to teach both Solid State andKlystron microwave theory. Each training system includes a 106 pages Lab Manualthat translate theory into application through15 classroom experiments.

Kit Contents1 Klystron tube mount (LRL-503A)1 Solid State Oscillator (LRL-503-SS)1 2K25 Klystron (LRL-723)2 Transitions (LRL-502)1 Frequency Meter (LRL-504)1 Slotted Line (LRL-505)2 Variable Flap Attenuators (LRL-506)1 Termination (LRL-507)1 Thermistor Mount (LRL-508)1 Power Supply (LRL-510A)1 H-Plane Tee (LRL-511)1 Directional Coupler (LRL-512)1 Fixed Attenuator (LRL-513A)1 Fixed Attenuator (LRL-513B)1 Cable RG-9 “M” to “M” Male (LRL-514)3 Cables RG-58 BNC to BNC Male (LRL-515)1 E-Plane Tee (LRL-516)1 Turning Probe (LRL-517)1 Detector Mount (LRL-5181 E-H Plane (LRL-521)4 Waveguide Stands (LRL-523)2 Horn Antennas (LRL-531)1 Shorting Plate (LRL-532)2 Bags of 8/32 Screws and Nuts1 Training Manual (LRL-530)

15 Experiments case

These cases permit safe storage of training kit components. Each componenthas a specific, preformed slot that helpsensure that all components are safelystored and available for the next trainingsession.

The only microwave training system that enables the trainer to teach bothklystron and solid State theory with single,economical training system.

5 Experiments case