Upload
others
View
12
Download
0
Embed Size (px)
Citation preview
Microstructure-sensitive modelling of deformation and fracture of TiAI alloys
Mohammad Rizviul Kabir
Experimental and Numerical Methods
Institute of Materials Research German Aerospace Center
Cologne, Germany Phone: +49 2203 601 2481 Email: Mohammad-rizvi [email protected]
(BY .f!C.f!D) By Am1bUllon - llon-
DLR.de • Chart2 »MR Kobir • Wf.Koll > S.12.2017
TiAI for turbine blade: Requirement and goal
/ ' Modelling for
microstructure-property correlations
Low pressure turbine blade
1.-----..>
Simulation Assisted Material
Engineering
DNeed for improvements in mechanical Properties:
OStrength at high temperature OCreep resistance ODuctility OFatigue strength OFracture toughness
D Can be improved by Microstructure optimization
DLR.de • Chart 3 »MR Kobir • Wf.Koll > S.12.2017
Outline: Modelling of TiAI alloy behaviour considering microstructure sensitivity
Three problem areas will be demonstrated
Modelling of deformation behaviour
Modelling of crack initiation and propagation
Modelling of dynamic fracture
Folie1Folie2Folie3Folie4Folie5Folie6Folie7Folie8Folie9Folie10Folie11Folie12Folie13Folie14Folie15Folie16Folie17Folie18Folie19