This version is for private use only and should not be distributed.

Mi LED Desk Lamp User Manual

This version is for private use only and should not be distributed.

01

Instruction1. Unpack the product and plug it into a power supply.2. Press the knob to turn on the light.

Rotary Knob

Power Cable

Body

135° Adjustable

Power Hole

This version is for private use only and should not be distributed.

02

Press the knob toturn on/off the light

Spin the knob toadjust the brightness

Press and spin the knob toadjust the color temperature

This version is for private use only and should not be distributed.

03

FCC Compliance Statement

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:1. Reorient or relocate the receiving antenna.2. Increase the separation between the equipment and receiver.3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.4. Consult the dealer or an experienced radio/TV technician for help.

This version is for private use only and should not be distributed.

04

Warning1. Please confirm that the input voltage is right. The use of inappropriate voltage may

damage the product and bring safety hazards.2. For indoor use only.3. Regularly check the power cord, AC adaptor, and other components . If any parts are

compromised, the product should no longer be used.4. Use standard adaptors only. Misuse of adaptors may damage the product and bring

safety hazards.5. Keep the product away from liquids and humid environments.6. The LED module can not be replaced.7. Do not disassemble the product. The light-emi�ing diode may cause damage to your

eyes.

This version is for private use only and should not be distributed.

05

Product Features

Model: MJTD01YLColor temperature range: 2700-6500KOperating temperature: -10˚C to 40˚CLamp input: 12V 0.5ARated input: 100-240V~ 50/60Hz 0.2ARated input power: 6W (42pcs×0.15W/LED Module)Wireless connectivity: Wi-Fi IEEE 802.11b/g/n 2.4GHz

Power factor: 0.4Luminous flux: 300 lumensLife expectancy: approx. 25000hOperating humidity: 0%-85%RHCompatible with: Android & iOSFCC ID: 2ABEU-MJTD01YL

Specifications

Off-delay Timer Mobile Control Firmware Upgrade

On/off TimerFour Lighting ModesThe Focus Mode

Eye Protection Adjustable brightness Adjustable color temperature

This version is for private use only and should not be distributed.

06

The Reset hole is at the bo�om of the lamp base. When powered on, insert a straightened tool into the hole for 5 seconds, and let go when the lamp starts to breathe. The Reset completes when the breathing stops.

Factory Reset

1. Scan the QR code below or go to App store to download Mi Home App.2. Make sure that the lamp is on. Open the application and follow the instructions in

the application.

Smart Control

* Make sure that the Wi-Fi network is available and is able to access the Internet properly.

* Factory Reset is required in a new network environment to reconnect the network.

This version is for private use only and should not be distributed.

Please read the user manual before using the product.

Go to www.mi.com to learn more.Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.Address: 10F-B4, Building B, International Innovation Park, 1 KeYuanWeiYi Road,

Laoshan, Qingdao, Shandong Province, People's Republic of China