RE

V P

L-E

03

B 0

1_

17

metallographic sample preparation

A good sample preparation is essential for accurate sample analysis. The Hitech Europe PolishingMachines - AP Series meet all your needs. Their ease of use, quality of construction, technical featuresand convenience are all fundamental ingredients that make the AP the best choice for yourLaboratory.In fact, the possibility to set the working wheel rotation speed and direction, the pneumatic pressure,the head speed and the cycle time, ensure the efficiency of the polishing machines AP making it an ahighly valued product by all operators in the laboratory. Furthermore it is possible to combine also theTouch Screen fluid dispenser P4T at any time.

Hydraulic SystemThe connection to water source is

useful for the dispensing of the water on the plate, which is

facilitated by adjustable nozzles. Rotating Head “swing away”This system allows using the polisher like a normal

manual polishing machine, because the head can be moved out of the working area

.

“Tilt up system”It is possible to release up the head of the polisher to easily replace the sample holder and the JIG, the working wheels, the abrasive papers and the cloths, or to clean the polishing machine

Fluid Dispenser P4TDispenser of diamond abrasive fluids, slurries, colloidalsilica and aluminaUsing the easy and intuitive touch screen, it is possible toset the number of pulses per minute and also duration ofeach pulse.The P4T version can be combined with any polishingmachine of all brands and models, as an indipendentlyprogrammable unit working in parallel with themachine..

Upper panel AP311T

Upper panel AP311/3V

Front panel AP311T/3V

Front panel AP311/3V

Upper panel AP311Front panel AP311

Drop Dispenser

Touchscreen

AP311T/Combo

Accessories

Magno Base

Working Wheel

Magno Plate

Paper Clamp

AP311T/3V(code 02-31-3311-A)

AP311/3V(code 02-31-6311-A)

AP311T/COMBO & P4T(code 02-31-1311-A & 02-37-D0P4T-C )

tecmet 2000 srl via Monferrato, 5 - 20094 Corsico (MI) - Italy

tel +39 02 486 00 385 - tel. +39 02 3663 8452

E mail: tecmet@tecmet2000.it www.tecmet2000.it

is product name of the metallographic instruments made in Italy by:

MODEL AP311T/3V AP311/3V AP311T/5V AP311/5V AP311/COMBO AP311T/COMBO

code 02-31-3311-A 02-31-6311-A 02-31-4311-A 02-31-7311-A 02-31-8311-A 02-31-1311-A

Steel frame - stainless steel screws Yes

Cover Resin reinforced shockproof / corrosion

Sample HolderIndividual Pressure

(3 samples)

Individual Pressure

(5 samples)

Individual Central

Pressure

(5 samples)

Individual Central Pressure

(5 samples)

Head Motor Dc Motor inverter Brushless Brushless

Motorized head rotational speed Variable 0~75 rpm

Rotating Head“swing away” Yes

“Tilt up system” Head Yes

Working wheel rotational speed (clockwise and

counterclockwise)0 ~ 600

Adjustable Hydraulic Unit Yes

Electronics Touch-screen Analogic Touch-screen Analogic Touch-screen

Cycle timeTimer up to 99

min.

Timer up to 15

min.

Timer up to 99

min.Timer up to 15 min. Timer up to 99 min.

Dispenser Automatic Manual Automatic Manual Automatic

Inverter coltrolled motor Yes

Power supply 230 V - AC

Hydraulic system Connect to water source

Pneumatic system Connect to air source (pressure 6 bar)

Dimensions (mm.) 600x800x400

Weight (kg.) 65 Kg

Splash guard and cover Yes

Instruction Manual - tool set – CE Certificate Yes

Teradrop Jig Samples (central pressure) /

Levelling baseNo Yes

Individua pression 3 holes (25 ÷ 50 mm) 5 holes (25 ÷ 40 mm)

Working Wheel Ø200-230-250-300

Sample Spacer (Ø 25-30-32-38mm) Ø est. 40mm Yes

Sample Spacer (Ø 25-30-32-38-40mm) Ø est.

50mmYes No

Grinding Paper Clamp (Ø 203 – 230 mm.) Yes

Grinding Paper Clamp (Ø 250 – 305 mm.) Yes