Metal Panels - Star Building Systems | Home

Metal Panels

a r c h i t e c t u r a l s y s t e m s c o m m e r c i a l & i n d u s t r i a l c o l d s t o r a g e s i n g l e e l e m e n t

Insulated Panels

a r c h i t e c t u r a l m e t a l W a l l P a n e l s y s t e m s d e s i g n W a l l ™ s e r i e s

designWall™ 500 • Most affordable laminated foam panel• Ideal for low-rise facades and renovation projects• Same basic specifications as Designwall 1000

but with flexible plastic backer in place of interior metal skin

• Maximum length 18’-0” and 24” maximum width

designWall™ 1000 • Popular choice for low-rise building and

eye-appealing renovation projects• 1-1/8” thick panel is identical in external

appearance to Designwall 2000 and 4000, but is more economical, with thermal and structural properties sufficient for many applications

• Value engineered laminated panel for cost effectiveness and aesthetics in both new construction and renovation

designWall™ 2000• Features a double-gasket shiplap joint in both

vertical and horizontal applications to maximize thermal efficiency and create a double barrier against air and water penetration

• Laminated construction allows for maximum design flexibility for custom fabricated applications

• Allows for use of economical expanded polystyrene or high-strength extruded polystyrene as optional core materials

designWall™ 2000r “ribbed” • Ribbed version of Designwall 2000 used primarily

for horizontal applications• Ribs 13/16” deep x 4” o.c. add a bold profiled look

to commercial construction• Identical joint configuration readily integrates

with Designwall 2000H, 2000S, and 4000H flat panels as well as Flushglaze 4500 windows and Design Louvers

• Optional module combinations (in 4” increments to 24” max.) allow for target wall dimensions or accent bands to be easily achieved

designWall™ 2000s “shadoW line” • Striated version of Designwall 2000 used for

horizontal or vertical applications• Striations .035” deep nominal x 5/8” wide provide

distinct and attractive linear shadowing effect to a wall

• Identical joint configuration readily integrates with Designwall 2000H, 2000R and 4000H flat panels as well as Flushglaze 4500 windows and Design Louvers

• Available in any module (standard or custom) that is noted for Designwall 2000 V & H

Product sPecifications:Core Material Expanded polystyreneThickness 1-1/8” (29 mm) Widths 24” standard (special widths 8” min. to 24” max.)Lengths 1’-0 to 18’-0 maximumExterior Surfaces Steel: Non-directional embossed

Aluminum: Smooth or non-directional embossedStandard Metal Gauge 22 steel, 0.040” aluminumR-Value 4

Product sPecifications:Core Material Expanded polystyrene (polyisocyanurate optional)Thickness 1-1/8” (29 mm)Widths 24” and 30” standard

(special widths 8” min. to 36” max.)Lengths 1’-0 to 24’-0 standardExterior Surfaces Steel: Smooth or non-directional embossed

Aluminum: Smooth or non-directional embossedStandard Metal Gauge 22/24 steel, 0.040”/0.040” aluminumR-Value 4-5

Product sPecifications:Core Material Laminated polyisocyanurate (polystyrene optional)Thickness 2” or 3” (51 or 76 mm)Widths 24”, 30” and 36” standard

(special widths 8” min. to 46” max.)Lengths 1’-0 to 24’-0 standard (30’-0 maximum)Exterior Surfaces Steel: Smooth or non-directional embossed

Aluminum: Smooth or non-directional embossedStandard Metal Gauge 22/24 steel, 0.040”/0.040” aluminumR-Value 9-22

Product sPecifications:Core Material Laminated polyisocyanurate (polystyrene optional)Thickness 2” or 3” (51 or 76 mm)Widths 12”and 24” standard (special widths 16” or 20” )Lengths 1’-0 to 24’-0 standard (30’-0 maximum)Exterior Surfaces Steel: Smooth or non-directional embossed Aluminum: Smooth or non-directional embossedStandard Metal Gauge 22/24 steel, 0.040”/0.040” aluminumR-Value 7-20

Product sPecifications:Core Material Laminated polyisocyanurate (polystyrene optional)Thickness 2” or 3” (51 or 76 mm)Widths 24”, 30” and 36” standard (special widths 8”min. to 42”max.)Lengths 1’-0 to 24’-0 standard (30’-0 maximum)Exterior Surfaces Steel: Smooth Aluminum: N/AStandard Metal Gauge 22/24 steelR-Value 9-22

Designwall™ and Flushglaze products are only available through Kingspan Benchmark.

a r c h i t e c t u r a l m e t a l W a l l P a n e l s y s t e m s d e s i g n W a l l ™ s e r i e s

flushglaze 4500• Satisfies an ever-increasing need to integrate

architectural window systems with Designwall 2000H, 2000S, 2000R and 4000H panel joinery

• 4 ½” deep system is ideal for continuous run fixed “strip” windows that are flush with plane of panels with front glass pocket

• All components are thermally broken• Well suited for low to mid-rise construction• Individual frames can be either shop or field

assembled and connect together using a unique “snap-lock” feature

flushglaze 7500• Provides for the integration of Designwall 2000H,

2000R and 4000H with curtainwall type window construction for “thru-tube” applications

• Very versatile system that readily adapts itself to different construction needs

• Includes a wide array of panel adapter extrusions, curtainwall components and modified panel edge options to suit specific window/panel applications

design louvers• Integrated louvers by AWV for Kingspan

Benchmark• Fully integrated with Designwall 2000H/4000H

2” and 3” panels• Extruded aluminum • 70% Kynar500® PVF Finish System• Factory assembled• Fixed or operable louvers, 4”, 5” or 6” deep

• Frames are anchored to structure at head and sill using concealed fasteners and provide for safe, cost effective inside glazing

• Glass and glazing is performed as a subsequent operation by a qualified glass technician

• Head and sill receptor extrusions precisely mate with panel joinery and naturally create a positive water barrier without internal entrapment or a complicated array of intricate components

• Basic window framing component profiles have been field proven through years of solid successful performance

• All components are thermally broken• Well suited for steel thru-tube “clad-over”

applications as well as aluminum thru-tubes• Very appealing in both aesthetics and function with

no secondary flashings or additional sight lines• Glass and glazing (not included) is performed as a

subsequent operation by a qualified glass technician

column covers, beam covers and sunshades by Quality metalcrafts for KingsPan benchmarK• Enhance overall aesthetics of a building by converting unfinished

I-beams or concrete conditions into attractive metal features• Column covers and aluminum plate beams available in round,

square, rectangular or oblong sections• Design options include tight joint, reveals, cap channels or rod and

sealant joints, and are available in aluminum plate, stainless steel or copper plate material

• 5” minimum radius and 14’ maximum section length• 70% Kynar 500® PVF Finish System• Sunshade design is highly customized to suit specific functional

and aesthetic applications

designWall™ 3000• Lightweight 1-1/4” thick panel features a

honey-comb core between smooth or embossed skins of steel or aluminum

• Uninsulated core allows uniform thermal expansion of face and liner sheet, resulting in exceptional panel flatness under extreme temperature differentials

• Offered with Kraft paper honeycomb core or an optional aluminum core for use where non-combustible wall construction is required

Product sPecifications:Core Material Phenolic impregnated kraft paper honeycomb

(aluminum honeycomb also available)Thickness 1-1/4” (32 mm)Widths 24”, 30” and 36” standard

(special widths 8” min. to 46” max.)Lengths 1’-0 to 24’-0 maximumExterior Surfaces Steel: Smooth or non-directional embossed,

Aluminum: Smooth or non-directional embossedStandard Metal Gauge 22/24 steel, 0.040”/0.040” aluminumR-Value N/A

designWall™ 4000• Combines performance with economy by featuring

a high-density foamed-in-place polyisocyanurate core with embossed steel skins

• Integrates with Designwall 2000 and is identical in profile and appearance

• Suitable and economical for high volume projects

Product sPecifications:Core Material Foamed-in-place polyisocyanurateThickness 2” or 3” (51 or 76 mm)Widths 24”, 30” and 36” standard

(special widths 20” min. to 44” max.)Lengths 1’-0 to 24’-0 standard (30’-0 maximum)Exterior Surfaces Steel: Non-directional embossed Aluminum: N/AStandard Metal Gauge 22/24 steel R-Value 14-20

Designwall™ and Flushglaze products are only available through Kingspan Benchmark.

a r c h i t e c t u r a l m e t a l W a l l P a n e l s y s t e m s c e n t u r y W a l l ™ s e r i e s

cWP-h: • Creates modern, high-tech appearance where flat,

horizontal architectural metal wall system is desired• Hidden fastener offset joinery is provided for easy

attachment to structural components from building exterior

• Typically installed over steel studs or tube steel• May be attached to hat channels, which have been

vertically applied over horizontal light gauge girts• Easily integrated with sheetrock wall

construction for multi-story applications

cWP-v:• Creates a flat vertical architectural wall system

with a modern, high-tech appearance• Easily attached to structural components from

building exterior through the provided hidden fastener offset joinery

• Typically installed over steel studs with horizontal strapping, or directly to girts (wide flange, tube steel or light gauge)

• Easily integrated with sheetrock wall construction for added fire safety

oPtional striated ProfilecWP-h Wave:• North America’s only sinewave profile foam core

insulated panel• Continuous sweeping profile creates beautiful

shadowing effects, especially when used with metallic or mica based paint systems

• Unique sidelap joint creates seamless appearance with fully concealed fastener attachments

• Panel can be integrated with CWP-H and CWP-V panels to create architectural highlights, or can be used by itself to create a dynamic wave appearance

* CWP-H and CWP-V Striated: available with optional striated profile to create a highly attractive linear appearance with subtle shadows

Centurywall™ products are only available through Kingspan API.

Product sPecifications:Panel Thickness 2” 2.5” 3”

R-Value by ASTM C 236 15 19 23 • 18 27 (ASTM C 1363 for CWP-H WAVE)

Standard Panel Widths (modules) 24” 30” 36”

Panel Length Maximum 30’ – 0”

Joint Configuration Interlocking tongue and groove

Insulation Material Laminated urethane modified isocyanurate with nominal density of 2.0 – 2.6 lbs./cu.ft.

a r c h i t e c t u r a l m e t a l W a l l P a n e l s y s t e m s c e n t u r y W a l l ™ s e r i e s

Centurywall™ products are only available through Kingspan API.

ar2-12 & ar3-12 accent Panels:• Create architectural highlights within a horizontal

flat panel wall system• Two or three bold asymmetric ribs per 12” module

create extremely unique linear accents• Fully integrates with all other CWP panel profiles• Consistent joint profile and depth provide continuity

in vertical and horizontal joint reveals as well as wall system R-value

• Available with factory-folded corner panels (choice of notched and bent or welded and painted to match your project’s budget and design needs)

• Trimless ends and aluminum extrusions are readily available for those finishing touches

Product sPecifications: ar2-12 & ar3-12Panel Thickness 2” 2.5” 3”

R-Value by ASTM C 236 15 19 23

Standard Panel Widths (modules) 12”



Insulation Material Laminated urethane modified isocyanurate with nominal density of 2.0 – 2.6 lbs./cu.ft.

Liner Sheet

(Plan View)

Face Sheet

Variable Panel Module Variable Panel Module

1/8” (Nom.)

Optional Field orFactory Applied Sealant

Field or FactoryApplied Sealant

Hidden PC-1 Panel Clipwith (2) #14 Fastenersat Horizontal Support

tyPical cWP-v Joint four corner intersection

VariablePanel

Module

Face Sheet

Liner Sheet

Field or FactoryApplied Sealant

Pressure EqualizationChamber

Hidden PC-1 Panel Clipwith (2) #14 Fastenersat Vertical Supports

Rainscreen

(Section)

1/2” or 3/4”Reveal withCapillary Break

tyPical cWP-h Joint

(Optional) FieldApplied Butyl Sealant

Field or FactoryApplied Butyl Sealant

(2) 1/4” - 14 X 3 TEK 3w/ WHSR Per VerticalSupport (Clip if Required)

Panel Module Lineis to the center of the Interior Joint

ar2-12

ar3-12

h-Wave Joint detail

c o m m e r c i a l & i n d u s t r i a l t h e r m a l s P a n ® W a l l P a n e l s

• Foam core chemically bonded to non-permeable steel facings to retain insulating value over time

• Improved side joinery offers excellent foam-to-foam contact for full thermal seals

• One step installation makes panels fast, economical alternative to single element siding with liner systems

• Optional factory-caulked liner side joint saves erection labor (not available for cold storage applications)

200 “inverted rib”

• Foam core is chemically bonded to non-permeable steel facings, resulting in retention of insulating value over time

• Superior strength of urethane foam core resists thermal crippling during temperature pull-down

• Relatively flat surfaces ideal for easy wash down in food facilities

• Shallow profile allows excellent sealing of vapor barriers

• Improved side joinery offers excellent foam-to-foam contact for full thermal seals.

300 minor rib Partitions, liners, ceilings

• Architectural grade appearance for cost of commercial/industrial product

• Double interlocking joints self-aligning and weather-tight

• Use in combination with other panel types to create architectural accents

• Available in stucco embossed or smooth (minimum of 24 gauge required for smooth)

300 r striated

Product sPecifications:Panel Thickness 2” 2.5” 3” 4” 5” 6”

R-Value by ASTM C 236 16 20 25 33 41 49

Panel Width 42” (1,067 mm)

Panel Length Minimum 10’ – 0”; Maximum 48’ – 0”


Insulation Material Foamed-in-place urethane modified isocyanurate with nominal density of 2.3-2.6 lbs. / cu. ft.

• Provides look of masonry stucco at a fraction of the cost, without the need for additional sub-trades

• Unique embossing pattern allows use of 26 gauge facings, resulting in a very economical wall system

• Ideal for architectural applications where flat profile is desired

• Easy to use with architectural treatments, such as cornices, etc

• Most economical flat wall system available for metal building systems

300 a azteco® embossed


R-Value by ASTM C 236 16 20 25 33 41 49






R-Value by ASTM C 236 16 20 25 33 41 49






R-Value by ASTM C 236 16 20 25 33 41 49





Commercial & Industrial Thermalspan® products are only available through Kingspan API and ASI.

• Provides look and feel of E.I.F.S. or textured concrete without inconvenience of field-applied textures

• Choose from 8 in-stock Granitstone colors or custom colors and 5 in-stock Granitstone Quartz colors

• Optional striated profile provides unique alternative to standard flat surface

300 gs granitstone®

• North America’s only sinewave profile foam core insulated panel

• Continuous sweeping profile creates beautiful shadowing effects

• Unique joint geometry creates complete continuity of wave profile

• Concealed fastener attachment• Available in stucco embossed or smooth

(minimum 24 gauge required for smooth)

400 v-Wave*

Product sPecifications:Panel Thickness 2” (50 mm) 3” nominal (80 mm)

R-Value by ASTM C 1363 18 27

Panel Width 39-3/8” (1,000 mm)




• Produced on Kingspan’s one-of-a-kind high volume continuous mineral wool production line

• Tested and approved in accordance with ASTM E119-98, “Standard Test Method for Fire Tests of Building Construction and Materials”

• Core material is non-toxic, does not release gases in fire and has smoke developed rating of zero

• Water repellent, free of (H) CFCs and recyclable• Provides superior strength and spanning

capability

600 fire rated* (dsl-fr)**

Product sPecifications:Panel Thickness 4” 6”


Panel Width 600 = 42” (1,067 mm), DSL-FR = 44 5/8” (1,133 mm)

Panel Length Minimum 8’ – 0”; Maximum 40’ – 0” (600), 26’ – 0” (DSL-FR)


Insulation Material Laminated lamella style rockwood core with an 8# nominal density

• One step installation provides excellent sound attention, insulating value and labor savings compared to multiple layer systems

• Combines thermal performance of insulated sandwich panels with proven European soundwall technology

• Tested for South Transmission Loss per ASTM E90 and Sound Absorption per ASTM C423. Sound Transmission Class determined in accordance with ASTM E413

• Core material is non-toxic, does not release gases in fire and has smoke developed rating of zero

• Water repellent, free of (H) CFCs and recyclable• Lamella style orientation of core provides

superior strength and spanning capability

600 Qt acoustical Panel*

Product sPecifications:Panel Thickness 4” 6”



Panel Length Minimum 8’ – 0”; Maximum 40’


Insulation Material Laminated lamella style rockwool core with an 8# nominal density


R-Value by ASTM C 236 16 20 25 33 41 49





Commercial & Industrial Thermalspan® products are only available through Kingspan API and ASI.

*Fabricated in Modesto, CA **Fabricated in Bristol, CT

c o m m e r c i a l & i n d u s t r i a l t h e r m a l s P a n ® r o o f P a n e l s

• Laminated membrane provides excellent heat reflectivity and emissivity often required by current energy code regulations

• Unique exterior membrane allows use of panel on very low slope roofs, and is ideal for pre-engineered structures as well as cold storage applications

• All panel-to-panel seams and roof openings sealed with a 48 mil batten strip to provide weather-tightness

• 20-year weather-tight warranty available• Factory Mutual System Approval

100 series membrane roof system


R-Value by ASTM C 236 16 20 25 33 41 49


Panel Length Minimum 10’ – 0”; Maximum 40’ – 0” (20’0” for cold storage applications)



• World’s most widely used foam core roof panel

• Ideally suited to meet Title 24 Energy Code requirements

• High-rib design provides maximum strength characteristics

• Joint design is simple and effective, easy to install and provides weather-tight assembly

• Versatile profile can be used as wall panel

900 high rib roof system

Product sPecifications:Panel Thickness 1.5” 2” 2.5” 3” 4” 5” 6”*

R-Value by ASTM C 236 12 16 20 25 33 41 49*

Panel Width 39 3/8” (1,000 mm), 40” (1,016 mm)


Joint Configuration Overlapping rib


*Available only through Kingspan API

Commercial & Industrial Thermalspan® Roof Panels are only available through Kingspan API and ASI.

• Panel Exterior: Standard is 26 gauge, stucco embossed (except 300 A and 300 GS which are Azteco embossed and 400 which is 24 gauge only) with G-90 galvanized steel or aluminum-zinc coated steel. Also available in 24 and 22 gauge where extra durability is required

• Exterior Finish: Standard is 1.0 mil Valspar® Fluropan® (PVDF) or Dynapon® (MP)

• Panel Interior: Standard is 26 gauge, stucco embossed G-90 galvanized steel or aluminum-zinc coated steel. Also available in 24 and 22 gauge

material sPecifications (100/200/300/300a/300gs/300r/400/600/dsl-fr/900/1000)

• Interior Finish: Standard is 1.0 mil Valspar® Dynapon® (MP), USDA accepted and suited for most wash down environments. For heavy wash down areas, plastisol (PVC) or stainless steel is available

• Color and Finish Options: Choose from in-stock standard colors or select a custom color to match your needs

• In partnership with Valspar, all of Kingspan’s Standard SOLID and Premium MICA & METALLIC Fluropon® PVDF COOL colors meet requirements for Energy Star® steep-slope roof products.

Valspar’s Energy Star® compliant Fluropon® SR Coatings have an added infrared reflective pigment and are available in a variety of COOL colors. Thick film coatings to meet environment concerns are available, along with custom color matching

• Exterior paint system warranties are available for up to 20 years, depending on specific system and application. Contact Kingspan for details

• Standard product is non-directionally stucco embossed, but smooth finishes are available with certain restrictions

• Mechanically seamed sidelap provides unsurpassed weather-tightness at slopes as low as .25/.12

• Hidden clip fastening eliminates need for through fasteners (except at eaves, endlaps and rakes)

• 42” width allows fast installation• Interior liner provides bright, reflective,

washable surface to help reduce lighting requirements

1000 standing seam roof system*

Product sPecifications:Panel Thickness 2” 3” 4” 5”

R-Value by ASTM C 236 16 25 33 41



Joint Configuration Mechanically seamed 2” nominal vertical sidelap


*Fabricated in Deland, FLCommercial & Industrial Thermalspan® Roof Panels are only available through Kingspan API and ASI.

c o l d s t o r a g e t h e r m a l s P a n ® m e t a l P a n e l s

• Most popular profile for cold storage applications

• Very economical insulated wall panel• Thickness range from 2” to 6” makes panel

especially suited for exterior wall panels on Cold Storage Buildings

• Pleasing architectural design is also recommended for Industrial/Commercial projects

200 series


R-Value by ASTM C 236 16 20 25 33 41 49


Panel Length Minimum 10’– 0”; Maximum 48’ – 0”


Insulation Material Foamed-in-place urethane modified isocyanurate with nominal density of 2.3–2.6 lbs. / cu. ft.

• Ideal for interior partition walls and suspended ceilings, coolers, freezers and processing areas

• Foam core is chemically bonded to non-permeable steel facings, resulting in retention of insulating value over time

• Superior strength of urethane foam core resists thermal clipping during temperature pull-down

• Relatively flat surfaces ideal for easy wash down in food facilities

• Shallow profile allows excellent sealing of vapor barriers

• Improved side joinery offers excellent foam-to-foam contact for full thermal seals

300 series


R-Value by ASTM C 236 16 20 25, 33, 41 49





• Ideal for architectural applications where a flat profile is desired

• Available in widths of 42” and 36” standard maxim length at 48´

• Tongue-and-groove joint configuration (same as 200 and 300 series panels)

• Provides the look of masonry stucco at a fraction of the cost, without the need for additional sub-trades

300 a series


R-Value by ASTM C 236 16 20 25 33 41 49




Insulation Material Foamed-in-place urethane modified isocyanurate with nominal density of 2.4 lbs. / cu. ft.

Cold Storage Thermalspan® Metal Panels are only available through Kingspan API and ASI.

• World’s most widely used foam core roof panel• Ideally suited to meet Title 24 Energy Code

requirements• High-rib design provides maximum strength

characteristics• Joint design is simple and effective, easy to

install and provides weather-tight assembly• Interior liner provides bright, reflective,

washable surface reducing lighting requirements

• Versatile profile can also be used as a wall panel

900 high rib roof system

Product sPecifications:Panel Thickness 1.5” 2” 2.5” 3” 4” 5” 6”*

R-Value by ASTM C 236 12 16 20 25 33 41 49*

Panel Width 39-3/8” (1,000 mm); 40” (1,016 mm)

Panel Length Minimum 10’– 0; Maximum 48’ – 0”

Joint Configuration Overlapping rib


• Mechanically seamed sidelap provides unsurpassed weather-tightness at slopes as low as .25/.12

• Hidden clip fastening eliminates need for through fasteners (except at eaves, endlaps and rakes)

• 42” width allows fast installation• Interior liner provides bright, reflective,

washable surface to help reduce lighting requirements

1000 standing seam roof system*

Product sPecifications:Panel Thickness 2” 3” 4” 5”

R-Value by ASTM C 236 16 25 33 41



Joint Configuration Mechanically seamed 2-3/4” vertical sidelap


• Provides a complete, one-piece weather tight exterior roofing system

• Foamed-in-place (urethane foam) insulated metal panel utilizes a fully adhered “Class A” membrane composed of 34 mil white PVC

• Membrane is factory adhered to a 26 gauge G-90 galvanized steel substrate

• Applications for both conventional and pre-engineered structures

• Most suitable for cold storage applications requiring maximum energy efficiency

• Factory Mutual System Approval

100 series membrane roof system


R-Value by ASTM C 236 16 20 25 33 41 49


Panel Length Minimum 10’– 0; Maximum 40’ – 0” (20’–0” for cold storage applications


Insulation Material Foamed-in-place urethane modified isocyanurate with nominal density of 2.4 lbs. / cu. ft.

* 6” only available through Kingspan API

Cold Storage Thermalspan® Metal Panels are only available through Kingspan API and ASI.*Fabricated in Deland, FL

c o l d s t o r a g e h e r c u l e s ® d o o r s

• Used for hand truck and personnel traffic in buildings where environment control is necessary

• Suitable for interior and exterior uses• Two panel hinged door is available for

larger openings

• Ideal door for blast freezer and extreme low temp applications

• Appropriate in a wide variety of applications

• Most often used as a pedestrian traffic door for extreme low temperature, blast freezers, or any controlled environment

• Used for both pedestrian and material handling traffic, especially where space restricts use of swinging doors or when installation space is available on only one side of a door opening as with corridors and loading platforms

• Available with manual operation (MHS), and operators can be added

infitting hinged

overlaP freezer

horizontal sliding

Product sPecifications:Height 2’6” 6’6” 7’ 8’

Width 2’ 2’6” 3’ 3’6” 4’ 4’6” 5’6”

Thickness 4” 6”

R-Value 33 50

Insulation Foamed-in-place polyiso CFC-free

Door Panel Structural frame consists of kiln-dried straight-grained Douglas Fir rails and plywood stiles clad with the specified metal. The core is injected with foamed-in-place polyurethane. All seams are sealed.

Product sPecifications:Height 2’6” 6’6” 7’ 8’

Width 2’ 2’6” 3’ 3’6” 4’ 4’6” 5’6”

Thickness 4” 6”

R-Value 33 50



Product sPecifications:Height 7’ 8’ 9’ 10’ 12’ 14’

Width 5’ 6’ 7’ 8’ 9’ 10’

Thickness 2” 3” 4” 6”

R-Value 16 25 33 50



Hercules® Cold Storage Doors are only available through Kingspan API and ASI. Fabricated in Deland, FL.

sPecial aPPlicationsKingspan is the world-wide manufacturing leader of specialty doors designed for non standard applications. When you need an insulated door built for custom applica-tions - and to a precise specification - you can be confident that no one has more experience in the design and manufacture of special purpose doors than Kingspan. Our sales, engineering and R&D teams work with customers from the outset of a project to custom design a new door, or adapt a new or existing design.

• Ideal for applications where fast-opening and seal-tight closing is important, especially in areas where material handling traffic such as fork lifts and pallet jacks operate

• Suitable for coolers, freezers and industrial buildings for interior and exterior applications

• Available with manual operation (MBP)

• Available with electric (EVL) or manual (MVL) operation. Ideal in applications where there is a minimum side room or when several door openings are close to-gether as with warehouse loading docks

• Head room of door height plus 18” to 24” is required above door panel

• Load bearing walls or an additional load bearing structure is required to support weight of door and hardware

• Double Vertical Lift Door (MDVL) is available if headroom is limited to slightly more than half the door size

• Ideal for tight spaces where side room and head room are limited

• Suitable for interior and exterior applica-tions, it is designed for use in coolers, freezers and industrial buildings

bi-Parting horizontal sliding

vertical lift

sectional overhead

Product sPecifications:Height 7’ 8’ 9’ 10’ 12’ 14’

Width 5’ 6’ 7’ 8’ 9’ 10’


R-Value 16 25 33 50



Product sPecifications:Height 7’ 8’ 9’ 10’

Width 5’ 6’ 7’ 8’ 9’ 10’


R-Value 16 25 33 50



Product sPecifications:Height 7’ 8’ 9’ 10’

Width 5’ 6’ 7’ 8’ 9’ 10’


R-Value 16 25 33 50



Hercules® Cold Storage Doors are only available through Kingspan API and ASI. Fabricated in Deland, FL.

s i n g l e e l e m e n t m e t a l W a l l s y s t e m s

button Punch series Wall Panels• Button punch series panels offer the designer a

variety of concealed clip profiles• Panels can be used in conjunction with one another• Fabricated from Galvalume/Zincalume, aluminum,

zinc, copper, or stainless steel• Coatings are available in various colors to enhance

appearance and provide extended weatherability• Profiles lengths up to 25 feet are suggested• Extended lengths can be accommodated• Heavy gauges are available• Additional profiles available

metal Walls

integrity series Wall Panels• Integrity series panels offer designers creative

solutions for today’s challenging architecture• Panels are furnished by Morin as uninsulated

systems that can be applied vertically or horizontally

• Most panels can be used in conjunction with one another for enhanced appearance

• Fabricated from Galvalume®/Zincalume®, aluminum, zinc, copper or stainless steel

• Coatings are available in various colors to enhance appearance and provide extended weatherability

• Profiles can be supplied in 12 and 16 inch widths and lengths up to 25 feet are suggested

• Extended lengths can be accommodated• Heavy gauges are available

concealed fastener series Wall Panels• Concealed fastened series panels provide a full range

of architectural pleasing designs• Panels are furnished by Morin as uninsulated systems

that can be applied vertically or horizontally• Most panels can be used in conjunction with

one another• Fabricated from Galvalume/Zincalume, aluminum,

zinc, copper or stainless steel• Intermediate stiffening ribs for this series can be

added or deleted for clean visual appearance• Coatings are available in various colors to enhance

appearance and provide extended weatherability• Profiles range in width from 12 to 24 inches and

lengths up to 25 feet are suggested• Extended lengths can be accommodated• Heavy gauges are available• Additional profiles available

1/2”

1-1/2”

12”

11-1/2”

12”

1-1/2”

12”,16”, 18”, 24”

1-1/2”

12”

1-1/2”

1-1/2”

12”

4” 8”

12”

1-1/2”

X-12

a-12 aa-12

K-12*

v-12*

t-12u-12**

W-12

b-12*

r-12*

f- n-12

Xd-

X-16 Xe-

Xab-16Xf-

Xa- Xg-

Xb- s-16*

Xc-

12”

7/8”

12”,16”

7/8”

11”

12”1”

1-1/2”

16”

7/8”

12”,16”

7/8”

12”

6” 6”

1-1/2”

12”

1-1/2”

12”

1-1/2”

16”

7/8”

12”,16”

7/8”

12”

1-1/2”

12”,16”

7/8”

12”,16”

7/8”

12”,16”

7/8”

16”

7/8”

12”,16”

7/8”

* Fabricated in Bristol, CT ** Fabricated in Fontana, CA

Single Element panels are only available through Morin.

s i n g l e e l e m e n t m e t a l W a l l s y s t e m s

12”

1-1/2”

12”, 16”

3”4-1/2”

6”

24”

1-1/2”

24”

2”

24”

3”

liner series Panels• Selection of an interior liner panel added to an

exterior metal panel will provide a cavity for insulation• Fabricated from Galvalume/Zincalume and aluminum• Profiles range in width from 12 to 24 inches and in

depth from 1 ½ to 6 inches with lengths up to 22 feet are suggested

• Extended lengths can be accommodated• Heavy gauges are available• Additional profiles available

eXPosed fastener series Wall Panels• Exposed fastener series panels provide architect and

designer with options of an attractive/bold appearance, and flexibility with economics of the project

• Panels are furnished by Morin as uninsulated systems that can be applied vertically or horizontally

• Fabricated from Galvalume/Zincalume, aluminum, zinc, copper or stainless steel

• Coatings are available in various colors to enhance appearance and provide extended weatherability

• Profiles range in width from 24 to 40 inches and in depth from ½ to 4 inches with lengths up to 40 feet are suggested

• Extended lengths can be accommodated• Morin can provide crimp curve panels in selected

profiles (please contact your local sales represen-tative for availability)

• Aesthetic louver blades can be fabricated to match a variety of profiles

• Heavy gauges are available• Additional profiles available

br-28

vb-36**

l-12*l-16*

l-24-5f*

l-24W-2**

l2-24-5f*

l2-16W-0**l3-16W-0**

l2-24W-0**l3-24W-0**

l3-24-3f*

l-12-2f* l-12W-1**

vb-34*

c-37-7/8”**c-29-7/8”

y-29y-36

c-40-1/2”

br7-35**

e-30*

e-36**

mr-36

e8-40**

o-24*

0-24W**

28”

1-1/2”

34-1/8”

1-3/4”

36”

1”

br9-36**36”

1-1/2”

29-5/8” ,

7/8”

37-5/16”

29”, 36”

1-1/2”

12”

1-5/16”

40”

1/2”

35”

1-1/2”

30”

1”

36”

1”

24”

1-5/16”

36”

3”

40”

1”

16”

2”, 3”

24”

2, 3”

24”

4”

24”

4”

* Fabricated in Bristol, CT** Fabricated in Fontana, CA


metal roofs


standing seam series roof Panels• Standing seam series panels are tested periodically to

supply architects and engineers with technical support for a changing environment

• Some panels can be supplied for ½:12 minimum roof slopes and still meet weathertightness requirements

• Fabricated from Galvalume/Zincalume, aluminum, zinc, copper or stainless steel

• Intermediate stiffening ribs are optional for this series• Coatings are available in various colors to enhance

appearance and provide extended weatherability• Profiles range in width from 12 to 24 inches and in

depth from 1 to 3 inches with lengths up to 40 feet are suggested

• SRR/SSR/SLR/SWL profiles can be portable roll-formed to seamless panel lengths that can exceed 200 feet

• Most standing seam series panels meet UL and/or FM approvals

• Retro-fit is an ideal application for a standing seam series panel

• Heavy gauges are available

bcr

mss-24*

scr

slr

srr

ssr*

sWl

12-3/4”,16-1/4”, 20-1/4”, 22”, 24”

1-1/2”

24”

3”

12”,15-1/2”, 18”, 19-1/2”, 24”

1”

12”,16”, 18”

2”

12”,16“, 18”

2-1/2”

12”,16”, 18”

2-1/2”

12”,16”, 18”, 22”, 24”

1-3/4”

eXPosed fastener series roof Panels• Exposed fastener series panels are an economic

roof cover solution• Fabricated from Galvalume/Zincalume, aluminum,

zinc, copper or stainless steel• Coatings are available in various colors to enhance

appearance and provide extended weatherability• Profiles range in width from 24 to 40 inches and in

depth from ½ to 4 inches with lengths up to 40 feet are suggested

• Extended lengths can be accommodated• Morin can provide crimp curve roof panels in

selected profiles (Please contact your local sales representative for availability)

• Heavy gauges are available

s i n g l e e l e m e n t m e t a l r o o f i n g s y s t e m s


systems

Pressure release Wall systems• Designed to give clear, unobstructed opening for hazardous

portion of any building• Wall must be installed with restraining cables to prevent

damage to other property and allow reuse of panels (unless damaged) after an explosion

• Wall can be engineered to release at a specified design pressure

ul fire rated systems• Field assembled fire rated wall systems can be designed

with a variety of profiles that meet 1 to 4 hour ratings• Even if entire wall does not require a fire rating, a

continuity of exterior appearance can be maintained• Can be used as interior partition, instead of masonry

construction

mitered corners• Corners are installed whenever horizontal continuity must

be maintained• Miterwelded Corners are constructed from .050 aluminum,

continuously welded and are post painted in a Kynar® finish after fabrication (recommended for solid colors)

• Miterseam Corners are constructed from the same material as adjacent panel and are structurally bonded (recommended for mica and metallic colors to ensure color matching to adjacent panel)

eXtrusions• Variety of standard and custom extrusions is available for

7/8 and 1 ½ inch deep wall panels


br-28 y-29y-36

br9-36** br7-35**

c-37-7/8”**c-29-7/8”

e-36**

e-30* e8-40**

mr-36 o-24W**

0-24* vb-36**

vb-34*

28”

1-1/2”

29”, 36”

1-1/2”

36”

1-1/2” 1-1/2”

35”

29-7/8”, 37-5/16”

7/8”

36”

1”

30”

1”

40”

1”

36”

3”

24”

4”

24”

4”

36”

1”

1-3/4”

34-1/8”

s i n g l e e l e m e n t m e t a l r o o f i n g s y s t e m s


f i n i s h e s

color coatings • In partnership with Valspar®, all of Kingspan’s

Standard SOLID and Premium MICA & METALLIC Fluropon® PVDF COOL colors meet requirements for Energy Star® steep-slope roof products

• Valspar’s Energy Star® compliant Fluropon® SR coatings have an added infrared reflective pigment and are available in a variety of COOL Colors

• Thick film coatings to meet environment concerns are available

• Custom color matching available• Contact Kingspan at 1-877-638-3266 to request

a color card

granitstone Performance testing:Moisture resistance (ASTM D-2247) 14 days exposure, no deleterious effects

Salt spray (ASTM B-117) 1000 hours, no deleterious effects

Abrasion resistance (ASTM D-968) 500 liters of sand, no deleterious effects

Accelerated weathering (ASTM G-23) Passes 2,000 hours

Freeze/Thaw (60 cycles) No checking, cracking or splitting

Mildew resistance (MIL STD 801B) No growth of mildew

Flame spread (ASTM E-84) < 25, Class 1 rating

granitstone Product sPecifications (centuryWall & designWall):

Panel Thickness 2” 2.5” 3”

R-Value by ASTM C 236 15 19 23

Standard Panel Widths (modules) 24” 30” 36”



Insulation Material Laminated urethane modified isocyanurate with nominal density of 2.0 – 2.6 lbs./cu. ft.

granitstone Product sPecifications (thermalsPan):

Panel Thickness 2” 2.5” 3” 4” 5” 6”

R-Value by ASTM C 236 16 20 25 33 41 49

Standard Panel Widths 42” (1,067 mm)



Insulation Material Foamed-in-place urethane modified isocyanurate with nominal density of 2.3 – 2.6 lbs./cu. ft.

granitstone®

• Features advantages of lightweight insulated panels with architectural appearance of natural granite or sprayed stucco

• Combines time-tested beauty of acrylic aggregate coatings with epoxy primed Galvalume/Zincalume facings to create a high-strength, factory-finished panel that is energy efficient and fast to install

• Custom colors are offered to match decorative needs• Provides a distinctive, modern architectural

appearance at surprisingly low cost• Tested to meet or surpass performance requirements• 10 year limited warranty

granitstone Quartz• Complements existing stucco standard Granitstone

finishes with natural stone finish for panel systems• Features deeper, heavier texture composed of

natural multi-colored quartz aggregates with clear acrylic binder

• Mimics complex relationship of texture and color that marks appearance of natural stone

• Five colors: cascade sand, teton gray, monterey gold, foxwood beige and dakota bronze

• All panels have standard USDA approved interior paint finishes

Specifications: consists of oven-baked epoxy primer and factory applied finish coat of air dried 100% acrylic bonder with natural silica aggregate, minimum 12 mils dry film thickness, finished to resemble sprayed stucco.

Imperial White

Antique Bronze

Bone White

Dove Grey

Sandstone Parchment Rawhide

Teton Grey Foxwood Beige Dakota Bronze Cascade Sand Monterey Gold

Surrey Beige

f i n i s h e s

VALSPAR FLUROPON® SPECIFICATIONS

NOTES:1 – Cladded Steel: 50% AL-ZN steel, or extra smooth HDG (G-90) with minimum spangles. 2 – American Society for Testing and Materials. 3 – Mica gloss levels at 60º are 15-25. Metallic gloss levels at 60º are 25-35. 4 – Excluding substrate or zinc cracking in the metallic coating. 5 – Less than 1/8” maximum average creepage from scribe, none or few #8 blisters in the field. 6 – No objectionable chalking, color change or adhesion loss. 7 – Color chips shown are within limits of chip reproduction but are not necessarily accurate due to printing process and viewing conditions. 8 – Metalescent colors are mica or metallic colors, such as Silver. Micas are 2-coat without clear coat. Metallics are 3-coat systems with clear coat. 9 – Metalescent colors are directional colors and will have minor differences with each production run. To minimize these effects of metalescent colors, all material for the project should be painted together. 10 – Contact Kingspan for optional aluminum facings.

KingsPan aPi: modesto, ca Manufactures commercial/industrial and cold storage panels as well as Centurywall™ architectural panels, and services the Western U.S., Western Canada and the Pacific Rim.

KingsPan asi: deland, flManufactures commercial/industrial and cold storage panels as well as the Hercules® brand of insulated doors, and services the Eastern U.S., Eastern Canada and the Caribbean.

KingsPan benchmarK: columbus, oh Manufactures the Designwall™ series of architectural panels and services the Eastern U.S. and Eastern Canada.

morin: bristol, ct, fontana, ca and deland, fl Manufactures single element insulated and non-insulated architectural wall and standing seam roof systems, and services the world.

Kingspan is the world’s largest producer of urethane foam core sandwich panels. our five u.s. plant locations manufacture a

complete line of insulated metal composite panels, insulated doors, and single element architectural metal panels to serve

the needs of the architectural, commercial/industrial, cold storage and food processing markets. our multiple coast-to-coast

locations and broad product line allow us to provide unsurpassed service to the entire north american market as well as

export destinations.

PROPERTy TEST METHOD SPECIFICATION1

Dry Film Thickness (nominal) ASTM2 D 1400 0.20 - 0.30 mil primer ASTM D 1005 0.70 - 0.80 mil topcoatGloss3 ASTM D 523, measured at 60 degrees 15 +/- 5Pencil Hardness ASTM D 3363, Eagle Turquoise HB – HFlexibility T-Bend ASTM D 4145 (No adhesion loss) 1 – 2T bend4

Mandrel ASTM D 522, 180 degree bend No cracking around 1/8” mandrelAdhesion ASTM D 3359 No adhesion lossReverse Impact ASTM D 2794 No cracking or adhesion loss4

3000 x inches of metal thickness (lb-in) Abrasion Resistance ASTM D 968 65 +/- 10 liters To expose 5/32” diameter of metal substrate Graffiti Resistance Cleanability of defaced panels; Minimal effect spray paint, pensAcid Pollutant Resistance ASTM D 1308 20% sulfuric acid, 18 hours No effect 10% muriatic acid, 15 minutes No effectSalt Fog Resistance ASTM B 117 Passes5 1000 hours 5% salt fog @ 95º F Cyclic Salt Fog ASTM B 5894, 2016 hours Passes5 2016 hoursUV Exposure Humidity Resistance ASTM D 2247, D 714 Passes 1500 hours 100% relative humidity @ 95º F Color Retention ASTM G 153, G 154 Passes6 5000 hours Accelerated Weatherometer ASTM D 2244 Maximum 5∆E units change (Hunter) Florida exposure, 10 years @ 45º South Chalk Resistance ASTM D 4214, Method A Florida exposure, 10 years @ 45º South Maximum chalk is a rating of 8

The information contained in this brochure and in the accompanying typical detail sheets is thought to be reliable and correct, but is subject to change without notice. Kingspan assumes no responsibility for engineering or design of any structure or sub-structure, whether such structure contains products manufactured by Kingspan or not. Typical details are meant to show the products of the seller in a manner which is representative of the way in which they are installed. It is the responsibility of the buyer or his or her architect or engineer to verify that any product is suitable for the conditions and use intended and that the products are compatible with any other material.

1-877-638-3266 www.kingspanpanels.usInsulated Panels

MTU-BK03 02/09 Reorder MBF 407-657-7414

Environmental Benefits Statementof using post consumer waste fiber vs. virgin fiber

Kingspan Insulated Panels saved the following resources by printing this booklet with paper made from 100% recycled fiber and 50% post-consumer waste, processed chlorine free, and manufactured with electricity that is offset with Green-e® certified energy certificates.

trees water energy solid waste greenhouse gasses

22 4,803 10 1,051 1,776 fully grown gallons million Btu pounds pounds

Calculations based on research by Environmental Defense Fund and other members of the Paper Task Force.

ANCIENT FOREST

FRIENDLY TM

725 Summerhill Dr.Deland, FL 327241-888-882-5862

2000 Morgan Rd.Modesto, CA 953581-800-377-5110

720 Marion RoadColumbus, OH 432071-877-638-3266

Morin East685 Middle StreetBristol, CT 060101-877-638-3266

Morin West10707 Commerce WayFontana, CA 923371-877-638-3266

Morin South1975 Eidson DriveDeland, FL 327241-888-882-5862

Documents

Metal Panels - Star Building Systems | Home