METAL FINISHING, PLATING, COATING

Change ServiCe requeStedMaCi Publishing, inc., 2432 SW Pepperwood rd, topeka, KS 66614-5293

January, 2014

Photos, Top, L-R: A-1 Paint, Powder & Sandblasting’s Frank Laster. Modern Plating’s Terry Lazar & Lesley Lazar. An Ajax TOCCO induction heating unit at COFFEYVILLE SEKTAM. Bottom L-R: The Lee Horneyer Co.’s Rob Pierski, Ryan Reinhardt & Lee Horneyer. Microfinish’s Operations Manager Mike Heinze. Disposable Instrument’s Ken Erich & Sandy Clipsham with a CITIZEN Swiss lathe.

METAL FINISHING, PLATING, COATINGA-1 Paint, Powder & Sand Blasting KC,MO,

Names Frank Laster As PresidentMicrofinish, St. Louis Area, Celebrates

55th Year; Continues Improvements Modern Plating, Tulsa, OK: 50 YearsCOFFEYVILLE SEKTAM, Coffeyville, KS,

Follows Principles; Installs OkumaQTE Mfg. Solutions Grows By AcquisitionsThe Lee Horneyer Co, St. Louis, MO, Celebrates 70 Years and Adds LineDisposable Instrument, Lenexa, KS Adds Lathe

Elk Grove Village, IL(847) 364-9060

Allendale, NJ(201) 818-0100

Fountain Valley, CA(714) 434-6224

The World Leader in CNC Swiss Turning

The Evolution Continues.Same quality you’ve come to expect with more tools, more fl exibility, more value.

2-YEAR Machine andControl Limited Warranty

www.marucit.com

Cincom Sliding Headstock Type Automatic CNC Lathe

Machine specifi cations

Maximum machining diameter (D) ∅ 16 mm (.63")Maximum machining length (L) 200 mm (7.87") / 1 chuckingMain spindle speed 15,000 rpmBack spindle speed 10,000 rpmLive tools 7 standard

Supported by MCC’s legendary, full service, distributor network.

Experience the difference.

McClain Tool & Technology, Inc. 106 Weldon Parkway, St. Louis, MO 63043(P) 1-800-886-5839 (F) 1-314-432-1180Serving: Kansas • Missouri • So. Illinoiswww.mcclaintool.com

4 MID-AMERICA COMMERCE & INDUSTRY

Mid-America Commerce & Industry is published 11 times a year (June & July are combined) by:

MACI Publishing, Inc. 2432 SW Pepperwood Rd.

Topeka, KS 66614-5293

David Lippe, managing editor; Ray Lippe, editor. Published since 1973. Mid-America Commerce & Industry is a registered trademark of MACI Publishing, Inc.

A one year subscription is $20.00.

Phone: 785-272-5280 Fax: 785-272-3729

Email: [email protected] site:

www.maci-mag.com

Mid-America is sent to industrial purchasing managers, plant man-agers, industrial engineers, and company presidents in Missouri, Kansas, Oklahoma, Nebraska, Arkansas and Iowa.

JANUARY, 2014Volume 41 - No. 05

Disposable Instrument Installs CITIZEN Lathe .................... 5

Clement Joins Paulo Products .. 6Microfinish Celebrates 55 Years . 8Horneyer Celebrates 70 Years,

Adds Anchor Danly Line ....... 10A-1 Paint, Powder & Sandblasting

Names Frank Laster Pres ......14COFFEYVILLE SEKTAM Follows

Principles: Installs Okuma ......16Modern Plating; 50 Years .............18Editorial ..........................................20Upcoming Issues ..........................23Mo-Kan AFS Christmas Party .....24QTE Expands With Acquisitions .26St. Louis NTMA Meets .................28Upcoming Trade Shows ..............30

816.554.6710 | advancedcoatings.com | 2300 ne independence ave. | Lee’s summit, mo 64064

quaLity is our commitment.

Your Kansas City regional supplier of:

Powder Coating

Wet Coating

Architectural

JANUARY, 2014 5

Disposable Instrument, Lenexa, Kansas, has recently installed a new CITIZEN K16E Type VII Swiss automatic lathe. The 44-year-old firm specializes in machining, pointing (grinding) and bending of round stainless and aluminum from .031” to .512” in diameter and up to 25” in length. The company also offers buff-ing, polishing, electropolishing and packaging. Vendor managed inventory (VMI) is also avail-able. “We can handle jobs from 50 to 50,000”, noted Ken Erich, operations manager. “As well as prototypes.”

The new CITIZEN, the company’s second, was purchased from McClain Tool & Technol-ogy. It was needed to keep up with customer demand and for its productivity. “McClain is big part of why we brought the machin-ing work in house,” commented Erich. “Our Citizens have greatly reduced our delivery time. Mc-Clain’s local service techs are real experts.”

The new Citizen K16E features dual spindles, 7-axis, a 15,000 rpm spindle and an FMB 12’ magazine barloader.

Other equipment at the com-pany includes several specialized grinding, bending and finishing machines along with the electrop-olishing operation.

Disposable Instrument has recently expanded and now has al-most 12,000-sq.-ft. of space for its veteran crew of 11 (average tenure of over 15 years). It primarily serves the medical and animal health industries world-wide.

“Our quality, delivery, ex-perienced crew and customer service has been important to our long-term success,” stated Sandy

Disposable Instrument Installs CITIZEN K16E Type VII Swiss Lathe

Clipsham, president. She noted that Disposable Instrument has expanded several times in the past and has ample room for more equipment.

Disposable Instrument can be contacted at: (913) 492-6492; Fax (913) 888-1762; PO Box 14248 Shawnee Mission, Kansas 66285; www.disposableinstrument.com.

Lenexa, Kansas

Above (l-r): Disposable Instrument’s Ken Erich & Sandy Clipsham.

Above: The new Citizen K16E Swiss lathe at Disposable Instrument.

Above: Examples of parts produced on the new Citizen K16E Swiss lathe.


VAN-AM Tool & Engineering, LLC5025 Easton Road, St. Joseph, MO 64507 • 816-233-6622 • Fax 816-233-9422E-mail: [email protected] • Web Page: www.vanam-tool.com

1 Piece or 1,000,000 PiecesVan-Am can cost effectively produce your metal parts.

TOOLING • STAMPING • LASER CUTTING • MACHININGFABRICATING • WELDING • ROBOTIC WELDING

Services We Provide:• Design and Build all Die Types and Sizes

• Specialists in Transfer & Louver Dies• Die Maintenance & Repair

• Production Stamping & Fabrication• 15 Presses with Capacities to 600 tons

• Short or Long Production Runs with Fast Deliveries• General & Custom Machine Work

• CNC Machining & Wire EDM • CNC Laser Cutting & CNC Press Braking

• Design and Build Jigs, Fixtures & Special Machines• Custom Fabrication & Welding

• Robotic Welding & Plasma Cutting

“FULL SERVICE”Tool & Die Professionals

Production & Precision Gear Manufacturing ½” to 24”

Spur • Helical • Spline Shafts Sprockets • Timing Belt Pulleys

Prototype - Small to Large Quantities - CNC Hobbing Emergency Repair - Hard Turning - Broaching

Hard Boring - CNC Turning - Automatic Sawing

Advanced Jiffy Machine Products

Serving Area Industries for 35 Years

(TF) 800-995-3168 • [email protected] (P) 417-235-6942 • (F) 417-235-7074

PO Box 268, #9 Industrial Dr., Monett, MO 65708

Clement Joins Paulo ProductsPaulo Products Co. has an-

nounced that Jeb Clement has joined its KC facility as a Sales Engineer. Paulo’s KC facility offers a wide variety of heat-treat-ing, induction hardening, cryo-genics, blasting and black oxide services.

Paulo offers heat treating, brazing and metal finishing as well as metallurgical & engineering

services at its five facilities across the country.

For more information visit www.paulo.com.

Left: Paulo Products’Jeb Clement.

JANUARY, 2014 7

No matter what your application needs, Nordson & Contrast Equipment Company have a solution for you!

More powder coating optionsto meet your needs.

Encore LT® Powder Gun Simple to use controls

Powder and air flow controls provide optimum performance

Automatic feedback current feature for real-time monitoring

Available in hopper, box feeder or wall mount for added flexibility

On-gun purge provides fast, thorough cleaning

Patented select charge technology offers pre-programmed electrostatic settings for recoating, metallics or cavities

Lightest gun on the market reduces fatigue

Low velocity high efficiency powder pump

Encore® Powder Gun 20 programmable presets and on-gun

controls offer unprecedented control of the coating process

On-gun purge provides fast, thorough cleaning

Patented select charge technology offers pre-programmed electrostatic settings for recoating, metallics or cavities

Automatic feedback current feature for real-time monitoring

Low velocity high efficiency powder pump

Available in hopper or box feeder, wall or rail mount for added flexibility

Prodigy® Powder Gun HDLV (high density low velocity)

technology moves more powder with less air for the highest transfer efficiency

Paints fastest at high line speeds

Purge and color change in <30 seconds to reduce downtime

Absolute best at painting in Faraday Cage areas

Available in wall and rail mount for added flexibility

Basic Deluxe Premium

No matter what your application needs,Nordson has the right powder coating solution for you!

Contrast Equipment Company 1449 N. Topping - Kansas City, MO 64120Phone (816) 241-2412 • Toll-Free (800) 280-2412 Fax (816) 241-4134 • Toll Free Fax (800) 760-1682www.contrastequipment.com

Scan this code for more information about Contrast Equipment Company.

Contrast Equipment Company 1449 N. Topping - Kansas City, MO 64120Phone (816) 241-2412 • Toll-Free (800) 280-2412 Fax (816) 241-4134 • Toll Free Fax (800) 760-1682www.contrastequipment.com

Scan this code for more information about Contrast Equipment Company.

More liquid coating optionsto meet your needs.

Trilogy™ Non-Electrostatic Spray Systems

Excellent atomization – provides outstanding finish quality.

Versatile and easy to use – both air spray and LVLP can be achieved in a single gun.

Quick-Clip technology – allows fast, easy removal and installation of the needle without affecting the gun settings.

Variable material, air volume and spray pattern regulation – for a variety of automotive application needs.

Fast exchange and adjustment of air cap – with a ¼ turn of the retaining ring.

Ergonomically designed – for ease of operator use.

Trilogy™ Electrostatic Spray Systems

Wide range of aircaps and fluid tips for consistent and repeatable atomization quality in various applications.

The highest kV in the industry – 93 kV – reduces material waste costs.

Handle forward design provides better balance and improved operator comfort.

Automatic current limiting allows for greater control of charging which translates to better part coverage whatever the part profile.

Quick-flush fluid passages for ease of cleaning and maintenance.

Rugged gun bodies minimize maintenance costs and downtime.

RA-20R Rotary Atomizer Most efficient spray technology

available.

Close-in painting for high transfer efficiency and superior penetration into part recesses.

Outstanding atomization delivers fine finishes and precise film-build control.

Excellent pattern control reduces overspray significantly for reduced paint waste.

Applies a variety of coatings including solvent-based, high-solids, waterbornes, waterborne emulsions, two-component materials, metallics and 100-percent-solids coatings.

Wide pattern adjustability – from 8 to 42 inches.


No matter what your application needs,Nordson has the right liquid coating solution for you!

© 2012 Nordson Corporation All Rights Reserved

LQL-12-5682 Issued 8/12

LQL5682a.indd 1 8/22/2012 1:31:52 PM

More liquid coating optionsto meet your needs.

Trilogy™ Non-Electrostatic Spray Systems

Excellent atomization – provides outstanding finish quality.

Versatile and easy to use – both air spray and LVLP can be achieved in a single gun.

Quick-Clip technology – allows fast, easy removal and installation of the needle without affecting the gun settings.

Variable material, air volume and spray pattern regulation – for a variety of automotive application needs.

Fast exchange and adjustment of air cap – with a ¼ turn of the retaining ring.

Ergonomically designed – for ease of operator use.

Trilogy™ Electrostatic Spray Systems

Wide range of aircaps and fluid tips for consistent and repeatable atomization quality in various applications.

The highest kV in the industry – 93 kV – reduces material waste costs.

Handle forward design provides better balance and improved operator comfort.

Automatic current limiting allows for greater control of charging which translates to better part coverage whatever the part profile.

Quick-flush fluid passages for ease of cleaning and maintenance.

Rugged gun bodies minimize maintenance costs and downtime.

RA-20R Rotary Atomizer Most efficient spray technology

available.

Close-in painting for high transfer efficiency and superior penetration into part recesses.

Outstanding atomization delivers fine finishes and precise film-build control.

Excellent pattern control reduces overspray significantly for reduced paint waste.

Applies a variety of coatings including solvent-based, high-solids, waterbornes, waterborne emulsions, two-component materials, metallics and 100-percent-solids coatings.

Wide pattern adjustability – from 8 to 42 inches.


No matter what your application needs,Nordson has the right liquid coating solution for you!

© 2012 Nordson Corporation All Rights Reserved

LQL-12-5682 Issued 8/12

LQL5682a.indd 1 8/22/2012 1:31:52 PM

PO

WD

ERLI

QU

ID


Microfinish, a metal finishing company with four locations in the Greater St. Louis area, is cel-ebrating its 55th anniversary and continues to expand and improve its operations and services.

The firm offers a wide range of metal finishing services includ-ing zinc plating, nickel/chrome plating, e-coating, powder coating and mechanical finishing (de-burring, burnishing, blasting and washing).

The ISO-certified firm has four locations that specialize in particular processes/sizes.

The 15,000-sq.-ft. Sunset Hills facility (formerly C&A Metal Finishing) offers vibratory finishing, deburring, ball-burnish-ing and pre-plate finishing. Both automated and manual cabinets are available to clean parts of al-most any metal and configuration.

Operations Manager Mike Heinze commented that mechani-cal finishing takes a lot of trial and error to find out what works with different metals, sizes and finishes.

“We have vibratory units ranging from a ½ a cubic foot up to 20 cubic foot units,” stated Heinze, a long-time industry veteran. “We know that quick turnaround is key so 90% of our work is completed within three days.”

The Sunset Hills facility works with many metals as well as castings, stampings, forgings and carbon fiber parts.

Its Warrenton powdercoating location has 48,000-sq.-ft. and meets John Deere JDM F-17 specifications and Caterpillar’s 1E 1951-1952 quality specs for powder coating. Its powder-coat-ing operation is also designated as a PACCAR Certified Quality

supplier (for the rail and truck industries).

The Warrenton facility houses two high-production, variable speed, powder coating lines. One includes a climate-controlled booth for tight quality con-trol. Custom racking, masking, labeling and packaging are also available.

The 125,000-sq.-ft. Gratiot facility, features a RoHS compli-ant high production nickel/chrome plating line; an E-coating line and a new larger zinc plating line for larger parts and assemblies.

The 20,000-sq.-ft. St. Louis zinc plating location offers two fully-automated rack lines and one barrel line. It offers yellow and black chromate and RoHs com-pliant blue-bright finishes. Two

ovens for baking and hydrogen embrittlement relief are also on site.

Microfinish’s plating is certi-fied to ASTM, CAT, Ford, John Deere, GM and Toyota specs.

Tractor trailer and van trans-portation are also available.

“Having exceptional people is key to our success,” stated Bill Stock, president, with 33 years of experience in the finishing indus-try. “Our four locations really complement each other and can handle all our customers’ metal finishing needs. We like to say ‘Let us finish what you started!’”

Microfinish can be contacted at: (314) 849-8181; Fax (314) 849-5149; www.microfinishco.com.

Microfinish Celebrates 55th Anniversary, Continues to Expand and Improve Operations

St. Louis Area

Above: Part of the crew at Microfinish’s Sunset Hills facility.

Above: A row of vibratory units at Microfinish’s Sunset Hills facility. These range from 1/2 cubic-foot up to 20 cubic-feet in capacity.

THERE MUST BE...A REASON

30 yEARS ANd STill pROvidiNg SOlUTiONS!

800-362-0099 • [email protected] • 8900 W Monroe Circle, Wichita, KS 67209 • www.nelsoninc.com

Mid-America’s Largest HARRINGTON Distributor!

REASONS

HOISTS • PARTS • SERVICEFrom Your Dependable Source

• Reliability• Durability• Runs Longer• Runs Harder• Fewer Repairs• Proven Quality• Lower Ownership Cost

A Hoist for your application:• Electric• Air• Ergonomic

From 125 lbs to 20 tons


The Lee Horneyer Company is celebrating its 70th anniversary and has announced that it now carries the Anchor Danly line of die sets, steel plates and metal fab-rication.

As the Midwest’s top distribu-tor for the tool, die, mold-making, metal stamping, injection molding and die-casting industries for the last 70 years, the Lee Horneyer Company is proud of its long his-tory and is constantly striving to prepare for the future.

Anchor Danly is a leading international manufacturer and distributor of high-quality die sets, steel plates and metal fabrication used in the production of tools, dies and molds for metal working, injection molding, machine bases, mining/construction equipment and general fabrication.

“The Anchor Danly line addi-tion is all about our commitment,” explains Ryan Reinhardt, VP/Sales Manager and 4th genera-tion of the family in the business. “Commitment to our customers, commitment to the industry and commitment to our long-term growth as a company.”

“Seventy years and four generations later, the lessons my grandfather taught me still ring true,” says Lee Horneyer. “He al-ways said, ‘be true to the market

The Lee Horneyer Co. Celebrates 70 Years & Now

Carries Anchor Danly Die Sets, Steel Plates & Fabrications

(Continued on page 12)

Lee Horneyer Company is Proud to Introduce Anchor Danly Die Sets, Steel Plates and Metal Fabrications

THE SOURCE FOR ALL YOUR TOOL & DIE AND MOLD REQUIREMENTS

CONTACT LEE HORNEYER COMPANY TODAY!11537 Adie Road St. Louis, MO 63043-3535 314-432-4115 800-325-6460 Fax: 314-432-7445

www.horneyer.net Email: [email protected]

INDUSTRIAL SPECIALIST I MACHINERY I TOOLS I ACCESSORIES

Die Sets Steel Plate Metal Fabrication

Anchor Danly is a leading international manufacturer and distributor of high quality die sets, steel plates, and metal fabrications used in the production of tools, dies, and molds for metal working and plastics injection molding, machine bases, mining and construction equipment, and general fabrications.

Our mission is to be the customer focused world-class supplier of choice to the metal working (tool) and plastic forming (mold) and steel fabrication industry servicing all manufacturing used throughout the world. Anchor Danly will provide innovative value added products and services to allow our customers to effectively compete in the global marketplace.

• Die sets • Steel plate and steel plate services • Metal fabrications, structural steel frames, fixture bases and weldments

Company Profile – Anchor Danly

Our Products


Plate Laser Cutting Aluminum Plate Sawing

Plasma Cutting

Tube Laser Cutting

Flame Cutting Thermal Processing Plate Grinding ShearingSaw Cutting

Production/Precision SawingWaterjet Cutting Aluminum Mold Plate Sawing

Alro SteelMetals • Industrial Supplies • Plastics

Plastics• Acetal • Acrylic • Delrin®

• Extren® • Fiberglass Grating

• Nylatron® • Nylon• Nyloil

• Phenolics • Polycarbonate • Polypropylene

• PVC • PTFE • Tivar®

Metals • Hot Rolled • Cold Finished • Aluminum

• Stainless • Brass • Copper

• Bronze • Cast Iron• Tool Steel

• Chrome Rod• Steel Grating • Expanded Metal

• Alloys • Mold Steel • High Speed

• Threaded Rod • Drill Rod • Ground Flat Stock

• UHMW-PE • Urethane• VHMW Sheet

8000 Hall St. Bldg #4 • St. Louis, MO 63147-2422 Pho: (314) 726-3080 • Fax: (314) 726-5017

Toll Free:(800) 325-0978

8600 S. 89th W. Avenue • Tulsa, OK 74131-3649 Pho: (918) 227-1456 • Fax: (918) 227-1455

Toll Free:(800) 722-4973

Processing Services

MISSOURI PLATINGCOMPANY

®Since1888

NICKEL BARREL ZINC • RACK ZINC

Trivalent Conversion Coatings

Our 40,000 sq. ft. Plant Offers Fully Automated Production Plating Lines

To Accommodate Your Plating Needs.

Missouri Plating Company(P) 816-483-0333 (F) 816-483-1096

7001 EAST 13TH STREETKANSAS CITY, MISSOURI 64126

www.missouriplating.com

you serve, have integrity, loyalty to your suppliers, and commitment to your customers and value the quality of your service.’ Those are the values our company has lived by as we’ve built relationships with customers that have lasted for generations.”

Lee Horneyer Company can be contacted at: (314) 432-4115; (800) 325-6460; Fax (314) 432-7445; 11537 Adie Road, St. Louis Missouri 63043; www.horneyer.net.

The Lee Horneyer Co. Celebrates 70th Anniversary

...From page 10

Above (l-r): Rob Pierski, outside sales engineer; Ryan Reinhardt, VP & Lee Horneyer, president.

JANUARY, 2014 13

manufacturing, inc.6790 Martindale • Shawnee, KS 66218(P) 913.441.4120 • (F) 913.441.0330

(TF) 888.441.4500 • www.c-rmfg.com

Since 1979

� e Talent to Perform with the Technology to Excel

CNC Milling

CNC Turning

Custom J-I-T Assembly

Welded Assemblies

Precision Made Parts Your Single Source Machine Shop for Quality and Dependable Service

A Modern Machine Shop magazine “Top 10 Shop”


Frank Laster was named President of A-1 Paint, Powder & Sandblasting, LLC., Kansas City, Missouri October 1, 2013. He had joined the company in Janu-ary 2012 as VP of Customer Relations.

The firm was founded in 2006 and offers painting and powder coating on all sizes of parts (up to 8’ high by 10’ wide by 60’ in length) and up to 7,000 lbs. on any size run. Most work is turned around in 5 days. The firm can sand or media blast parts if needed. Pack-aging and warehousing is also offered.

“Customer service and quality work are key to our success,” stated Frank. “That leads to the great refer-rals.”

Frank noted that A1 can work with any color or brand of coating.

A1 has a crew that operates in a 61,000-sq.-ft. building (located near I-435 and Truman Road) and features a 380’ enclosed straight paint line for maximum efficiency. It allows parts to be washed, phosphated, dried, painted or powder coated, baked, inspected and packed for shipment.

The firm serves a wide range of customers and

Frank Laster named President Of A-1 Paint, Powder & Sandblasting

Kansas City, Missouri

Above: A-1 Paint, Powder & Sandblasting’s Frank Laster with a large part in the process of being finished.

There’ve been some changes at MARUKA and they’re all good!

MARUKA - KS, MO, OK, AR (800) 262-7852 Serving the Machine Tool Industry Since 1968

JANUARY, 2014 15

industries including: recreation, fencing/gating, transpor-tation and utilities.

A-1 Paint, Powder & Sand Blasting can be contacted at: (816) 241-1200; Fax (816) 231-5542; 7601 E 12th Street, Kansas City MO 64126; [email protected]; A1powdercoatingpaint.com.

Above: Parts being coated at A-1’s KC facility.

Superior Aluminum Castings, Inc.1211 South Powell Road • Independence, MO 64057

(P) 816-796-5775 (F) 816-796-5776Email: [email protected]

• Sand Casting• •Air-Set No-Bake•

•Heat Treat•CNC Machining• •Painting•

From drawing or concepts... to complete tooling development... to supplying quality castings... to adding value where you need it.

Your Casting Connection

Superior

Aluminum

Castings, Inc. YEARSMade in the USA


COFFEYVILLE SEKTAM is an impressive CNC machining company located in Coffeyville Kansas. Estab-lished in 1976 the company is family owned and operated.

Chris Cornell, VP, stated, “We are guided by three core principles: absolute integrity; uncompromised quality and a constant drive for per-fection. Focusing on these principles has guided us to success.”

The company specializes in close tolerance machined components, as-semblies and tooling. They provide CNC turning, milling, grinding and induction heat treating as well as gear & spline cutting, sheet metal fabrica-tion and tool design.

The firm is ISO and AS 9100 (Rev C) certified as well as ITAR registered.

COFFEYVILLE SEKTAM cur-rently services both US and interna-tional markets: including aerospace, agriculture, construction, mining, military, forestry and energy.

The company operates in a 55,000- sq.-ft. manufacturing / as-sembly facility with 55 production CNC machine tools (with up to 5-axis capability). They have 75 highly skilled employees with specialized training and cross training.

COFFEYVILLE SEKTAM con-siders itself in a technology race with the future. “We must keep the latest technology in place to compete for current and future business,” stated Cornell. “Our entire team is totally committed to continuing to strive for perfection manufacturing top quality products that compete today and into the future. Perfection is the key, there is no room for poor quality or late deliveries. This is true of our products and our processes.”

As part of their latest technol-ogy additions the company just took delivery on a new Okuma MB-66V vertical machining center and will

install a new Okuma 600 mm horizontal machining center with a pallet pool in March of 2014.

COFFEYVILLE SEKTAM can be contacted at: (620)251-3880; fax (620) 251-0404: 509 North Cline Rd, Coffeyville, Kansas 67337; www.coffeyvillesektam.com.

COFFEYVILLE SEKTAM Guided By Core Principles; Installs Okuma MB 66V VMC

Above (L-R): Neil Howe, Product Manager; Amy Brinker, Administrative Assistant; Dave Powell, Product Manager; Daniel Atkinson, Quality Manager; Chris Cornell, Vice President; Bruce Hendrix, Production Manager; Justin Foulk, Product Manager; Larry Murrow, Business Manager and Steve Cornell, President

Coffeyville, Kansas

Above: Examples of the precision work done by COFFEYVILLE SEKTAM.

Ready For the Precision of an Okuma Machine?

Unplanned downtime due to poor machine quality is a concern. The inherent features of Okuma machines provide reliable precision and Hartwig’s staff is here to help ensure that your machines keep cutting chips and producing exact parts.

Locally, With Hartwig, You Receive: • 61 Service Engineers • Team of 11 Parts Personnel Ready-to-Assist • $3.5 Million Dollars in Local Spare Parts Inventory • Dedicated Hartwig Service Call Center Access • On-site Training with Every Machine Purchase • Application Engineering for Turnkey and Cell Design • Hartwig’s History and Stability – Serving the Manufacturing Industry for Over 53 Years

Okuma Provides: • Two-Year Warranty on GENOS Lathes and Mills and LB-EX Products • Okuma History and Solid Construction – Over 108 Years of Hand-Scraped Machines Built for Power and Strength

One can be yours for $67,860*!That’s right, Okuma’s superior machines are within your budget.Whether it’s a GENOS lathe starting at $67,860, the larger, thermally stable LB3000 EX-II beginning at $102,060, or the double-column design of the GENOS VMC at $120,860, there is an Okuma product for you!

Purchasing a quality machine from the Okuma line gives you outstanding speed, power and accuracy for your manufacturing – all at a great price. Purchasing from Hartwig provides you with exceptional before and after-the-sale service and support.

GENOS M460-VE

LB3000 EX-II

Come Kick the TIres!Your personalized machine tour and cutting demonstrations are ready to go! Come visit one of our demo locations and see Okuma’s quality in action and learn more about Hartwig’s outstanding service!

www.hartwiginc.com

Tired of Seeing the same service van at your shop?

HARTWIG ST. LOUIS10617 Trenton AvenueSt. Louis, MO 63132Tel (314) 426-5300 Fax (314) 426-5311

HARTWIG KANSAS CITY6110 Deramus AvenueKansas City, MO 64120Tel (816) 231-1850 Fax (816) 231-2822

HARTWIG WICHITA4959 South Lulu CourtWichita, KS 67216Tel (316) 522-5500Fax (316) 522-5558

HARTWIG OMAHA2210 South 156th CircleOmaha, NE 68130Tel (402) 758-0800Fax (402) 758-0801

*MSRP pricing applies only to sales in North and South America, is for base product only and does not include options, accessories, or freight.

MACI_Hartwig_Kick The Tires - January 2014.indd 1 11/26/2013 4:04:19 PM


Modern Plating Co.918-836-5081 • Fax 918-834-3300

1125 S Norwood Tulsa OK 74112 • www.modernplatingok.com

Modern Plating Co.• Anodize MIL-A-8625 Types II & III (hardcoat)

• Chemical Film MIL-C-5541 Class 1A & 3

• Electroless Nickel ASTM-B733

• Passivate QQ-P-35 Types I, II & III

• Silver QQ-S-365 Semi-bright to full bright

• Tin ASTM B545

• Zinc ASTM-B633 Type II (yellow) & III (clear)

• Zinc Phosphate TT-C-490Since 1964

Modern Plating Co., Inc., Tulsa, Oklahoma, is celebrating its 50th anniversary.

The firm offers a variety of plating and finish options includ-ing: anodize, chemical film, elec-troless nickel, passivate, silver, tin, zinc and zinc phosphate.

“We have focused on the processes that we do well,” stated Modern Plating’s Terry Lazar. He and his sister, Lesley Lazar Ault, are co-owners and children of company founder I. N. “Ike” Lazar.

In 1964, Ike Lazar, a long-time veteran in metal finish-ing, sold his house and used the proceeds to start the company at its current location. Plating part time (and with the help of Terry) the business was built up until Ike could work at it full time.

“My dad’s approach was ‘no job is too difficult’,” stated Terry Lazar, who is also a former Air Force fighter pilot and retired reservist. “Modern Plating always concentrates on responding to our customers’ needs,” he continued. “Our priorities are delivery, price

and quality. We work hard to keep our customers in parts. We have often been able to perform same-day service for a client that’s in a jam. We have several customers that have been with us for 50 years.” Lazar and Jeff Blanke, general manager, com-

bine for almost 80 years of experi-ence in plating and metal finishing. The two are quite proud of their crew and provide extra bonuses and incentives to keep everyone motivated.

Modern Plating serves a diverse group of industries across the mid-America region including: recreation, military, sporting goods, petroleum and electronics.

The family-owned firm oper-ates in a 10,000-sq.-ft. facility with a staff of 18.

Blanke pointed out that the company strives to maintain a 3-5 day turnaround on orders and is happy to provide tours to educate customers about the services the company provides.

The company has continually updated and improved its equip-ment and processes to maintain its high quality standards.

Modern Plating can be con-tacted at: (918) 836-5081; Fax (918) 834-3300; 1125 South Norwood, Tulsa Oklahoma 74112; www.modernplatingok.com.

Modern Plating Celebrates 50th AnniversaryTulsa, Oklahoma

Above: Examples of the finishing work done at Modern Plating.

JANUARY, 2014 19

Scan to see more pictures of IMEC’s work

• 96” x 36” x 10’ Capacity Automated Powder Line• Up to1600-lb Capacity• 5-stage Pretreatment System• 2nd Conveyor Line (24” x 36”) for Fast Color Changes• 7’ x 8.0’ x 25’ Powder Booth & Custom Oven• Liquid Paint Booths 30‘ x 12’ & 43‘ x 14’• Fast Turnaround• CARC Approved Coatings• 8’ x 8’ x 8’ Burnoff Oven • Sand & Soda Blasting• Pickup & Delivery

The experienced professionals at PowderTech can provide the prompt service, outstanding quality and competitive pricing you require.

THE QUALITY FINISH YOU REQUIRE.THE RELIABLE SERVICE YOU DESERVE.

[email protected], LLC • 800 E 37th St. North • Wichita KS 67219

www.powdertechllc.com

Above (l-r): Modern Plating’s Terry Lazar and Lesley Lazar outside the company’s Tulsa facility.


Paxton & Vierling SteelOmaha, NE

[email protected]

Midwest Tool, Inc.3637 Enterprise Ave. • Joplin, Mo 64801(P) 417-623-6872 • (F) 417-623-6998

Midwest Tool, Inc.

www.midwest-tool-inc.com (E) [email protected]

COMPLETE JOB SHOP

Milling & Turning (CNC & Manual)Boring GrindingSawing WeldingSheet Metal Work Inspection Lab

EDITORIALRAY LIPPE, EDITOR

Before we get too far into the new year, it appears we have to re-turn to the classroom for a refresh-er course on why we should retain the economic system that gave us, and other parts of the world, this very high standard of living.

Capitalism has always come under fire from socialists and communists and various religions. But, following World War II, it was clear that unleashing free enterprise after many years of government controls was a deciding factor in our victories. However, the success of capitalism was soon forgot-ten. By the late 60’s and into the 70’s “profit” was becoming a dirty word.

Businesspeople were caught off guard. Surely the public knows that without profits the factory or store will close. Still, few people spoke up to defend free enterprise. Some schools and colleges seemed more interested in teaching about the evils of the “Robber Barons” than the successes of capitalism in building America.

Today, with CEO salaries out of control, golden parachutes for even the worst performers, the rise of crony capitalism, the housing scandal and government’s insis-tence on income equality, it’s no wonder that even Pope Francis would criticize capitalism. (Of course his experience was in Ar-gentina.)

There’s a TV show called “American Greed,” but that’s a bit misleading. It showcases swindlers.

Any financial system or gov-ernment will fail when it’s run by criminals.

In his book, Money, Greed, and God, Jay W. Richards writes

JANUARY, 2014 21

DESIGN & FABRICATIONOF CABINETS AND COMPONENTS FOR

PANELS AND BOXES ARE MADE IN QUANTITIES OF 1 TO 20,000Our complete service can deliver a cabinet to you ready for final assembly.

Specializing in the design and fabrication of low cost metal cabinetsand components for new electronic and mechanical equipment. Allnew products go through several stages of development beforebeing launched full scale. Venture can do it all, and adjust the priceaccording to volume. Let uswork for youonyour next project!DESIGN -

SINGLEPROTOTYPES -

SMALLLOTS -

SHORTRUNPRODUCTION -

CONTINUOUSPRODUCTION -

Matching to your components and style specifications. Minimizing tool cost.

To checkForm, Fit, Function.

For the field test.

From1 to 20,000.

Timely lots shipped tomeet your on going schedule.

VENTURE INDUSTRIAL PRODUCTS, INC.525 SE OLDHAM PARKWAYLEE’S SUMMIT, MISSOURI 64081

TEL: (816)524-0441 FAX: (816)524-0836

CALL TODAYAT (800)588-0441Visit our website at: www.ventureindustrial.com

ELECTRONICS & INDUSTRY

SINCE

1972

THESE

®

that “Capitalism doesn’t need greed.” This is according to Adam Smith, author of Wealth of Nations (1776). “In a free market each person can pursue ends within his or her narrow sphere of competence and concern–our self interest–and yet an order will emerge that vastly exceeds anyone’s deliberations.”

Smith believed, “Any system that required everyone to always act selflessly is doomed to failure because it’s utopian. People aren’t like that. That’s the problem with socialism: it doesn’t fit the human condition.”

“In contrast, capitalism is made for real, fallen, limited human beings. “‘In spite of their natural selfishness and rapacity,’” busi-nesspeople “‘are led by an invisible hand...and thus without intending it, without even knowing it, advance the interest of society.’”

Richards, writes, “‘Notice that he says ‘in spite of.’ His point isn’t that a butcher, for example, should be selfish, or even that his selfish-ness is particularly helpful. Rather, his point is that even if the butcher is selfish, even if the butcher would love nothing more than to sell you a spoiled chunk of beef in exchange for your worldly goods, the butcher can’t make you buy his meat in a free economy.

“He has to offer meat you’ll freely buy. The greedy butcher, in other words, has to look for ways to set up win-win scenarios. Even to satisfy his greed, he has to meet your desires. The markets make this happen.” (Perhaps it’s the thought of an “invisible hand” that causes those intellectuals to roll their eyes and dismiss capitalism as smoke and mirrors. After all, how is it possible that one entrepreneur can end up helping thousands of people when all he intended to do was to get rich and become famous?)

Now, “Does capitalism make

(Continued on page 22)


816 E. Callan Road • Monett, MO 65708Phone: 417-235-7182 • Fax: 417-235-8262

Email: [email protected] Web: www.Clark-ind.com

Recognized for our Quality, Service & On-Time Delivery

Machining / Fabrication (Sheet, Plate, & Structural) / WeldingTurning, Milling, Punching, Cutting, Stamping, & Forming

High-Definition Plasma Cutting / Blanchard Grinding

people greedy?” Richards notes that many religious scholars don’t even bother to distinguish capital-ism from greed. “However there

Heartland Fabrication & MacHine10220 E 65th St, Ste A, Raytown, MO 64133

P: 816-778-0766 • F: 816-778-0799Website: www.heartlandfab.com • E-mail: [email protected]

8a, SDB and MBE CertifiedNative American Owned

A CNC Fabrication & Machine Shop Offering:• CNC Turning (including Y-axis)• Milling (4 Axis) • Welding (MIG & TIG)• Drilling • CNC Sawing• Tapping • Tube Bending• Welding • Light Punching

Editorial...From page 21

Hard Chrome PlatingElectroless Nickel

Serving Industry since 1988

Injection Molding DiesTool & Die/MachiningAviation & Aerospace

Printing & Packaging EquipmentFood & Drug Processing Equipment

CALL 816-525-5417 FAX 816-524-561597 EAST OLDHAM PARKWAY • LEE'S SUMMIT, MO 64081

email: [email protected]

is no evidence that capitalistic countries, or Americans in particu-lar, are greedier than average. In fact a recent British study found that America is the most generous with charitable giving.”

Larry Elder, writing for Creators Syndicate, says “Greed freaks out people...” He gives an example of a talk show host that asked Nobel laureate Milton Friedman, “When you see around the globe the maldistribution of wealth, the desperate plight of millions of people in underde-veloped countries...when you see the greed and concentration of power—did you ever have a moment of doubt about capitalism and whether greed’s a good idea to run on?”

Friedman responded: “Is there some society you know that doesn’t run on greed? You think Russia doesn’t run on Greed. You think China doesn’t run on greed? What is greed? Of course, none of us are greedy; it’s only the other fellow who’s greedy. The world runs on individuals pursuing their separate interests.

“The great achievements of civilizations have not come from government bureaus...Henry Ford didn’t revolutionize the automo-bile industry that way. In the only cases in which the masses have escaped from the kind of grinding poverty we’re talking about–the only cases in recorded history–are where they have had capitalism and largely free trade.”

Elder notes that “U2 frontman Bono, the rock star, agrees with Friedman. Bono has spent three decades raising money to allevi-ate poverty and combat AIDS and HIV in the Third World. In a speech at Georgetown University, Bono talks about his epiphany.”

“‘Rock star preaches capi-talism. Wow. Sometimes I hear myself and I just can’t believe it. But commerce is real...Aid is

JANUARY, 2014 23

DROP-IN TANK LINERSPROLONG THE LIFE OF YOUR TANK WITH

A CUSTOM BUILT DROP-IN LINER

• One piece vat, or drop-in liners are designed to prevent corrosion• Prolong the life of a new or existing tank• Available in a variety of materials and thicknesses• Drop-in liners withstand high temperatures, acids, waste fluids,

water or extremely corrosive liquids• Custom fabricated with dielectric machines to form a smooth,

tear proof seam• Custom shapes and sizes

CALL US WITH YOUR SPECIFICATIONS AND WE CAN BUILD A DROP-IN LINER FOR YOU

1-800-633-4603www.unitliner.com

just a stop-gap. Commerce (and) entrepreneurial capitalism takes more people out of poverty than aid...In dealing with poverty here and around the world, welfare and foreign aid are a Band-Aid. Free enterprise is a cure.’”

We all knew that. The prob-lem is that many of our regula-tions and laws are making our markets less free every year. Let your family, friends and employ-ees know that, despite its flaws, free enterprise is the answer and worth defending.

UPCOMING ISSUE

FEBRUARY 2014Foundry,Castings &

Molding Issue


3801 NW 14th Street • Topeka, KS 66618(P) 785.234.2111 • (F) 785.234.2141

Sheet Metal Fabrication• Laser Cutting • Forming• Punching • WeldingMaterialS• Steel • Brass • Copper • Stainless Steel • Aluminum • Galvanized • Galvannealed

up to 5’x10’, 5/8” thick

No

rth

to

pek

a F

ab

ric

ati

oN

new amada 4000-watt fiber laser

Faster, more efficient, cuts materialup to 5/8” thick (call for thicker cutting options)

MoKan AFS Holds Annual Christmas Dinner & Dance

The Mo-Kan Chapter of the American Foundry Society (AFS) held its 58th annual Christmas Dinner & Dance on December 14th at the Airport Hilton in Kansas City, Missouri.

The Event had over 80 in attendance and featured a dinner buffet and entertainment by the band “KC Prime.”

Numerous sponsors helped the event be a big suc-cess.

Mo-Kan AFS can be contacted at: (913) 621-1320.Photos from the event are on these pages.

JANUARY, 2014 25

Prototypes

Punching

Braking

Laser Cutting

Laser QC

Welding

Assembly

Powder Coating

ISO 9001-2008Certified

ICF Industries, Inc.617 S Main StreetPleasant Hill, MO 64080(P) 816.540.4200(F) 816.540.4299www.icfinc.com

EmployeeOwned

ICF added a 30,000sq. ft. warehouse to its

existing facility, bringing a total of 120k under one roof.

A One-Stop Resource Committed to Your Product, Specifications and Schedule!

The Ernest-Spencer Companies 3323 East 82nd Street Meriden, KS 66512

Phone: 785/484-3165 Fax: 785/484-2032 Email: [email protected]

For our full information, visit us at: www.ernestspencer.com

We make it . . . we coat it . . . and you look like a hero!

Ernest-Spencer is your one-stop resource for fabrication, finishing and delivery!


QTE Manufacturing Solutions (QTE) has announced the expansion of its business with the acquisition of the Mastercam business from Redbird, Inc. (Kansas & Oklahoma) and East-ech, Inc. (Tennessee ) & also Arkansas. Clients in these areas will have access to QTE’s comprehensive solutions for their product manufacturing and inspection challenges. As the number one worldwide customer retention leader for Mastercam software, the goal of QTE has been to continuously improve the productivity and through-put of their manufacturing customers. In addition to Mastercam Products and related value added services, such as training and support, QTE has also been the number one reseller of Veri-surf inspection software, and is proud to offer this and other best-in-class solutions.

“QTE has demonstrated leader-ship, growth and proven customer satisfaction in the channel since they began with Mastercam in the 1980′s. They continue to do so today by providing true single-source support for the entire Mastercam product port-folio and in creating additional value for their customers. We are certain QTE will provide a high level of sup-port to clients from both Redbird and Eastech,” said Doug Nemeth, Corpo-rate Sales Manager, North America and Europe, CNC Software (Mastercam). “The team at QTE has been serving manufacturing and engineering cli-ents for the past 28 years in Missouri, Southern Illinois and Kansas. The ad-ditional products and services QTE has to offer will allow our new clients to see immediate benefits and be success-ful for years to come.”

“Our goal is to always provide the highest levels of customer service and support. We welcome the new mem-bers to our QTE family of customers and will work to ensure their success,”

QTE Expands With Acquisitions

Left: Part of QTE’s crew.

JANUARY, 2014 27

Manufacturing SolutionsProviders of Software, Training & Contract Services for Manufacturers

“Our Experience Guarantees Your Success”

Technology for CNC Machining and Inspecting Your Products

Helping You Make Better Products Faster!

877-429-5708 www.qtemfg.com

Upcoming Training Classes Near You:

St. Louis, MOFeb. 11-12 ..............3D MachiningMar. 4-6 ..................2D MachiningMar. 25-26 ...... Verisurf Inspection

Kansas City, MOFeb. 4-6 ..................2D MachiningMar. 11-12 ...............3D MachiningMar. 18-19 ........ Mastercam Lathe

Wichita, KSFeb. 18-19 ...... Verisurf InspectionMar. 25-27 ..............2D MachiningApr. 8-9 ..................3D MachiningApr. 10-11 ...........................GD&T

View the entire training schedule at:qtemfg.com/class-schedule

#1 Worldwide Reseller for Mastercam Customer Retention in 2013 (This is our Third Year in a row!)

#1 Worldwide Reseller for Verisurf Inspection Software in 2013 & 2012.

Over 170 NC Programmers produced in our state of the art training facilities in 2013.

said Jeff Quinn, President, and 38-year industry veteran. “Our cus-tomers range from small one-man shops to Fortune 500 companies (QTE is a Boeing Preferred Sup-plier),” stated Quinn. “We have the expertise and flexibility to help manufacturers utilize software to maximize efficiency and profit-ability.”

QTE has recently upgraded its three state-of-the-art training facilities (Kansas City, St. Louis and Wichita) and can also provide training at a customer’s plant or over the web. The firm has four application engineers on staff to answer questions or address problems as they come up. “We understand if your machines are not cutting you’re not making money,” noted Quinn.

QTE can be contacted at: www.qtemfg.com or (877) 429-5708.


• Quality Castings Iron (Gray, Ductile, Nihard, Niresist)

Aluminum (A356-T6, 319)

Steel (8630, WCB)

Stainless Steel (316, CF8M)

• Heat Treating• Machining 7 Mazak HCN 6800-IIs w/dual pallets 1HaasVF6•1MazakIntegrex30

• CMM Inspection

Offering Robo (Patternless) Molding!

Southern Cast Products Inc(870)972-1260•Fax(870)972-1261www.southerncast.comscpquotes@southerncast.com5701KruegerDrive,Jonesboro,AR72401

Specialists in Prototypes & Rapid

Production!

Since 1976

Precision Machining • Wire EDM Machine Repair and Rebuild

CNC Machining (4 & 5 axis) & Turning

Quality Since 1975

5015 SE 169 HwySt. Joseph, MO 64507 816-279-0906 fax 816-279-1437www.reardonmachine.com ISO 9001:2008 Certified

Since 1960

St. Louis NTMA Hears Speaking Expert

Above: Fred Miller talks about “No Sweat Public Speaking.” He discussed how to take a speech from “Blah to Ah!”

The St. Louis Chapter of the National Tooling & Machin-ing Association (NTMA) held a meeting on January 7th at Spazio Westport in St. Louis

The featured speaker was Fred Miller, an expert on public speak-ing. His presentation was “No Sweat Public Speaking.” Miller

emphasized that public speaking is a business, career and leader-ship opportunity. He discussed the components of a speech and gave numerous tips on how to take a speech from “Blah to AH!”

In other chapter business Hubbs Machine and Manufactur-ing was welcomed as a new mem-

JANUARY, 2014 29

Above (l-r): St. Louis NTMA’s Nick Berilla presents a membership plaque to Hubbs Machine & Manufacturing’s Rick Benward.

ber by chapter president Nick Berilla, Hartwig, Inc.. The St. Louis NTMA can be contacted at: (314)

378-1293 or [email protected].


Upcoming Trade Shows

May 7-8, 2014 Oklahoma City

Industrial & Tool Show, Cox Building, Oklahoma State Fairgrounds, Oklahoma City, OK; Expo Inc., 800-648-2792, www.expoindustrialshows.com

October 8-9, 2014Nebraska Products Show for Business & Industry, Fonner Park, Grand Island, NE; Mid-America Expositions, Inc., 402- 346-5412, www.showofficeonline.com

October 20-22, 2015Wichita Industrial Trade Show (WITS), Century II Expo Hall, Wichita, KS, 316-942-2401, www.witshow.org

Plastic Injection Molding

2130 Industrial Drive • McPherson, KS 67460

(620) 241-2400 [email protected]

www.fergusonproduction.com

C E R T I F I E D

I S O 9 0 0 1 - 2 0 0 0

A commitment to continuousprocess improvement since 1974

•Latemodelinjectionmoldingmachinesto1500ton.

•Gasassisttechnology.•Servorobotics.•Climatecontrolledfacility.

•In-housetoolingPMandrepair.

LASERS • PLASMA • PRESS BRAKES • SHEARS • FOLDERS • PLATE ROLLS • PRESSES

CNC FABRICATION & METALFORMING MACHINERY

Kansas City Wichita Don Patterson Mitch Brown 913.558.2121 316.640.5893

www.blackrockmachinery.com

FOUR LOCATIONS, ONE GREAT FINISH!www.microfinishco.com [email protected]

ZincPlatingDivision8353Courtney

St.Louis,MO63140Phone314-521-4142•Fax314-521-9637

This Facility ProvidesHydrogen Embrittlement Relief RoHS Trivalent Clear Yellow Chromate Black ChromateBarrel Plating Rack Plating

MetalFinishingDivision-MainOffice11048GravoisInd.Ct.St.Louis,MO.63128

Phone314-849-8181•Fax314-849-5149

This Facility ProvidesGlass Bead Blasting Vibratory DeburringVapor Degreasing Ball Burnishing

Derusting

MICROFINISHIPC,LLC4001Gratiot

St.Louis,MO63110Phone314-652-5200•Fax314-652-5202

This Facility ProvidesNickel/Chrome Plating Trivalent Zinc PlatingZinc Phosphate E-Coating

Hydrogen Embrittlement Relief

PowderCoatingDivision7000S.SpoedeLaneWarrenton,MO.63383

Phone636-456-1787•Fax636-456-1789

This Facility ProvidesClimate Controlled Powder Room

High Gloss--Low GlossAutomatic Reciprocating Guns UV Resistant PowdersTextured and Wrinkle A Rainbow of Colors

1 SETUP

5 SIDES

1/2 THE COST

WITH MORE STANDARD FEATURES . . .

The choice is simple.

The Haas UMC-750 5-Axis Universal Machining Center

Standard Features Include:

• Full 5-axis machining • 8100-rpm, 30 hp spindle • 40+1 SMTC • Wireless probing with routines for center of rotation measurement

• Dynamic work offsets and tool center point control

A Division of NYMAT Machine Tool Corp.

Kansas City (W. MO / KS)(913) 768-HAAS (4227) [email protected] www.haascncoutlet.com

St. Louis (S. IL / E. MO)(314) 567-HAAS (4227) [email protected] www.haascncoutlet.com

2014 Ads_RedSetUp_FO565.indd 1 11/25/13 1:30 PM

Documents

METAL FINISHING, PLATING, COATING