Upload
ishanweera1982
View
309
Download
24
Embed Size (px)
DESCRIPTION
GSM Training
Citation preview
Mentum Planet 5.7GSM
Mentum Planet Public Training
MP504
1
Copyright © 2014InfoVista S.A. All rights reserved.
Notice
This document contains confidential and proprietary information of InfoVista S.A. and may not be copied, transmitted, stored in a retrieval system, or reproduced in any format or media, in whole or in part, without the prior written consent of InfoVista S.A. Information contained in this document supersedes that found in
any previous manuals, guides, specifications data sheets, or other information that may have been provided or made available to the user. This document is provided for informational purposes only, and InfoVista S.A. does not warrant or guarantee the accuracy, adequacy, quality, validity, completeness or suitability for any purpose the information contained in this document. InfoVista S.A. may update, improve, and enhance this document
and the products to which it relates at any time without prior notice to the user. InfoVista S.A. MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THIS DOCUMENT OR THE INFORMATION CONTAINED HEREIN.
Trademark Acknowledgement
Mentum, Mentum Planet and Mentum Ellipse are registered trademarks owned by InfoVista S.A. MapInfo Professional is a registered trademark of PB MapInfo Corporation. iBwave Design is a trademark owned by
iBwave. This document may contain other trademarks, trade names, or service marks of other organizations, each of which is the property of its respective owner.
Last updated January 2014, MP504 GSM
2
IntroductionDefining a GSM Workflow (MP504)
12• Optionally, generate traffic maps.
13• Generate an analysis or simulation.
14• Generate and view layer statistics.
15• Optionally, generate Interference Matrices.
16• Optionally, generate Neighbor Plans.
17• Optionally, generate Frequency Plans
18• Optionally, create coverage maps.
19• Create reports.
20• Visualize in Virtual Google Earth
3
Site Editor: GSM networkCarrier configuration
4
Site EditorFrequency Planning
5
Site EditorPower Settings
6
Network Overlay Tool
• Simplifies the creation of an LTE overlay on an existing 2G or 3G network
• Supports initial creation on ongoing updates of the overlay from the underlying 2G/3G network
• Supports all technologies including CDMA/EV-DO, GSM, WCDMA/HSPA, WiMAX, and LTE
2G/3G network
LTE network
7
Traffic Map Management
• Provides detailed modeling of how and where subscribers utilize the network – A critical input for accurate
network performance modeling
• Traffic map generation distributes measured or modeled traffic
• Support for multiple traffic maps for various traffic scenarios & services
• Detailed subscriber modeling– Defines how subscribers
access the network (services, priorities, user equipments)
Detailed traffic map & Monte-Carlo simulations
8
Traffic MapsCreating from Network Data
9
Traffic MapsSector Display Schemes for Network Data
10
Traffic MapsCreating from Network Data
Instant Graphical Statistics based on imported network data:
“Top Ten Drop Call Sectors Bar Graph” and ”Top 30 Sectors Carried Traffic Line graph”
Any two columns can be defined for running statistics in Bar, Line or Point formats
11
Traffic Maps Creating from Network Data
• Using Network Data allows us to import and create traffic data based on Switch or Network Statistics for use in Mentum Planet
12
Traffic Maps Creating from Network Data
• Using Network Data as traffic data input and apply clutter weight for the traffic map generation.
13
Traffic Maps Creating from Network Data
• Use pre-bound network data and traffic spreading algorithm.
14
Traffic Maps Creating from Network Data
• Based on Sector Service Probabilities algorithm:
15
Traffic Maps Creating from Network Data
• Apply the clutter weighting to the traffic map
16
Traffic Maps Creating from Network Data
• Traffic Map with Clutter Weighting
17
Traffic MapsSocial Media and Geolocalization
18
• Ability to leverage social media information in traffic map generation
• Ability to leverage geolocated measurements in traffic map generation• Geolocated by Mentum
Planet geolocation engine
• Or geolocated by 3rd-party geolocation engine
• Very accurate traffic map generation process
Traffic Map Generator
Traffic MapsSocial Media and Geolocalization
19
Example of a Traffic Map from Twitter Feeds, in Washington DC
Changing the analysis areaCreating a custom area
Make your Cosmetic layer editable, so that your drawing toolbar becomes available
20
Changing the analysis areaCreating a custom area
Use any of the polygon tools to draw a specific shape on your map window, then use the Select tool and click on it
21
Changing the analysis areaCreating a custom area
This process will create a GRC file with a value of “Downtown” inside the selected polygon and NULL elsewhere.
22
Network AnalysesDefining a Workflow
1• Configure the Mentum Planet project including site configurations, antennas, and propagation models.
2• Optionally, generate predictions.
3• Generate the network analysis.
4• Analyze results.
23
GSM Network Analyses
24
GSM Network AnalysesSetup Wizard
25
GSM Network AnalysesOptions
26
GSM Network AnalysesOptions (cont’d)
27
GSM Network AnalysesOptions (cont’d)
• To streamline your workflow when you use the same settings for a number of analyses, you can define default analysis settings
28
GSM Analysis Layers
• Best Server analysis layers
• Interference analysis layers
• Quality Analysis layers
• Service Coverage layers
29
Network AnalysesViewing Results
Total C/I
Best Server Signal Strength
30
Layer StatisticsGenerating
31
Changing the analysis areaChoosing your area of interest
Statistics will be calculated only within the region chosen in the Analysis Area drop-down menu.New areas can be created by using the Areas function under the Project Data category in Project Explorer.
32
Ignoring invalid binsExcluding null values
Depending on the type of statistics that want to be generated, it may be interesting not to include points where the layer being analyzed has no values populated.In that case, the Exclude null values checkbox can be checked.
33
Applying filters to ignore unwanted binsSelecting a grid to filter
The grid you query can be an existing analysis layer or a any other grid you have created/generated before. Remember you can use the Areas function in Mentum Planet to create grids based on existing polygons.
34
Applying filters to ignore unwanted binsSelecting a grid to filter
Enable the Apply area filter checkbox and browse for the grid (numeric or classified) on which you will be applying the filter.
35
Applying filters to ignore unwanted binsOperators
Operator Meaning
v Reserved character to stand for "value"
== Equal
!= Not equal
> Greater than
>= Greater than or equal to
< Less than
<= Less than or equal to
&& And
|| Or
36
Applying filters to ignore unwanted binsSelecting a grid to query
The output file will exclude results for any bins where the value of the grid is “Buildings”, so that your stats reflect outdoor points only.
37
Viewing the statsSorting and exporting
In the Report Preview, results will be shown in absolute (km²) and relative (%) numbers, and can be sorted in ascending or descending order.This report can be exported to Excel or CSV format.
38
Creating graphsPDF/CDF
Highlight one of the columns in the report and click the Generate Statistics button to create a PDF or CDF of the results in that column.
39
Creating graphsX vs. Y
You can also select multiple columns in the Report Previewer and click on the Show Graph button to display a graph that will compare the multiple columns chosen. When choosing the best server, it can be used to see the ranking of all sectors on a particular metric.
40
Visualizing your resultsCreating Sector Display Schemes and Labels
By using the Sector Display Scheme button , you can color-code each sector based on its stats.There is also a Label button to help you display the per-sector values on the map.
41
Frequency PlanningDefining a Workflow
1• Check frequency-related settings
2• Generate Interference Matrices
3• Optionally, generate Neighbor Plans
4• Automatically allocate channels using the AFP module
5• Optionally, automatically allocate BSIC using the Color Code Planning module
6• Optionally, modify Frequency Plan using the IFP module
42
Check Frequency SettingsNetwork Settings
43
Check Frequency SettingsSector Settings
44
Interference MatricesCreating
45
Interference MatricesViewing
46
Neighbor Lists
• Generation, editing & management of multiple neighbor lists
• Comparison & merging of several neighbor lists
• Single or multi-technology neighbor lists neighbor list in urban Paris
47
Neighbor Lists
48
Neighbor ListsGenerating Neighbor Plans
49
Neighbor ListsGenerating Neighbor Plans
50
Neighbor listExample
• Site C0429• No Neighbor relations
• Apply Neighbor Plan
51
Neighbor listExample
• Neighbor Plan applied
• Site list contains Neighbor relations from Neighbor Plan
52
Automated Frequency Planning
53
Color Code Planning
54
Interactive Frequency Planning
55
Applying Frequency Plans
56
Raster AnalysisGrid Manager
• Fully integrated Vertical Mapper™ Raster GIS platform– Standard open raster
file format– Flexible raster map
display capabilities– Ability to edit any input
(clutter, heights…)– Advanced raster data
manipulation such as queries, calculations, etc…
Interference problem identification using raster query
57
GridsModifying
Trimming a grid brings the focus of network analysis onto the area of interest and can reduce the time it takes to generate analyses
58
Grid AnalysisUnderstanding Results
59
Spatial AnalysisPerforming
For example, you can use the:
Region Inspection tool
Point Inspection tool
Line Inspection tool
60
Point-to-Point AnalysisPerforming
61
Coverage MapsProducing
In the Layout window, you can:
• Add text by clicking the Text button on the Main toolbar.
• Move and resize frames using the Select tool.
• Align objects by choosing Layout Align Objects.
62
Layered PDFs Printing
When you print a layered PDF, you can disable/enable layers as you want them displayed on your window
63
ExtensionsAdding
You can open PDF documents from a Mentum Planet menu
You can add a command to connect to a web site
You can open MapInfo tools automatically when the project is opened
You can open Excel spreadsheets from a Mentum Planet menu
Some of the things you can do using extensions:
64