is a “made in Italy” ball valves manufacturer company for oil & gas application and chemical process industries.

Memit Valves Head Office & Production are located in the north of Italy, close to the heart of the Italian business, Milan, next to Malpensa airportand close to Genoaport.

2

Product Range

3

• Floating Ball Valves • Trunnion mounted Ball Valves• Top Entry Ball Valves• Special service Ball Valves• D.B.&B. Ball Valves (Two balls in one piece body)

Sizes: From 1/2” to 60” Class 150 to 2500 API 2000-3000-5000-10000.

Construction: Split Body Bolted Type, Metal to Metal Seats, Soft Seats.

Ends Connection: Raised Face, Ring Joint, But Welding, Hub, Compact.

Materials: Forging in Carbon Steel, Stainless Steel, Duplex/Super Duplex Steel, Special Alloys, etc.Cast materials available upon request.

Design according to:API 6D/ISO 14313Pressure Range: ASME 150 ÷ 2500API 6A/ISO 10423Pressure Range: API 2’000 ÷ 15.000

Applicable code: ASME, ANSI, BS, API.

Bore: Full Bore, Reduced Bore.

Fire Safe: API 6FA, API607, BS 6755.

Nace: MR0175 Latest Issue.

Special Feature: Available upon request.

Memit Valves production is in conformity to the main certification requirements.

Floating Ball Valves

4

Mod. (FXX)

General Description

Additional Requirements

Range

Floating Ball valve - Two (2) pieces Split bolted body - API 6D/ISO 14313 or BS 5351 - “O-ring” primary seals - Soft seated - antistatic device & anti-blow-out stem - Fire Safe Design to API 6FA or API 607 or BS 6755 part. 2.

Floating Ball valve - Two (2) pieces Split bolted body - API 6D/ISO 14313 or BS 5351 - “PTFE and/or Graphite” primary seals - Soft seated - antistatic device & anti-blow-out stem - Fire Safe Design to API 6FA or API 607 or BS 6755 part.2 .

Floating Ball valve - Two (2) pieces FULLY WELDED body - API 6D/ISO 14313 or BS 5351 - Soft seated - antistatic device & anti-blow-out stem - Fire Safe Design to API 6FA or API 607 or BS 6755 part.2 .

M= Metal Seated

C= Cryogenic Service with Extended Bonnet

M= Metal seated C= Cryogenic Service with Extended Bonnet

M= Metal seated

Size: 1/2” ÷ 6”x4”Pressure Class:ASME 150 ÷ 2500

Size: 1/2” ÷ 6”x4”Pressure Class:ASME 150 ÷ 2500

Size: 1/2” ÷ 6”x4”Pressure Class:ASME 150 ÷ 2500

F2A

F2E

FWA

• Special execution for any customer requirements.• Adjustable Stem Packing.

• ISO 5211 drilling on Top work.• Locking Device with or without padlock.

Other:

5

Floating Ball Valve 3” Class 300 RF

A350 LF2

Floating Ball Valve 8” Class 150 RF - A350 LF2

Painting according to spec. Norsok M501 - System 1.

Floating Ball Valve 2” Class 300 RF - A350 LF2

Mod. (FXX)

General Description

Additional Requirements

Range

Trunnion Mounted Ball valve - Two (2) pieces Split bolted body - API 6D/ISO 14313 - “O-ring” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part.2 .

Trunnion Mounted Ball valve - Three (3) pieces Split bolted body - API 6D/ISO 14313 - “O-ring” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part.2.

Trunnion Mounted Ball valve - Two (2) pieces Split bolted body - API 6D/ISO 14313 - “Lip seals” primary seals - Soft seated - antistatic device & anti-blow-out stem . Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part.2.

Trunnion Mounted Ball valve - Three (3) pieces Split bolted body - API 6D/ISO 14313 - “Lip seals” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part.2.

Trunnion Mounted Ball valve - Two (2) or Three (3) pieces Fully Welded body - API 6D/ISO 14313 - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part.2.

M = Metal Seated.

M = Metal Seated.

C = Cryogenic Service with Extended Bonnet.

M = Metal Seated. C = Cryogenic Service with Extended Bonnet.

M = Metal Seated.

C = Cryogenic Service with Extended Bonnet.

M = Metal Seated.

Size: 1/2” ÷ 6”x4”Pressure Class:ASME 150 ÷ 2500API 2000 ÷ 10’000 Size: 6” and overPressure Class:ASME 150 ÷ 2500API 2000 ÷ 10’000 Size: 1/2” ÷ 6”x4”Pressure Class:ASME 150 ÷ 2500API 2000 ÷ 10’000 Size: 6” and overPressure Class:ASME 150 ÷ 2500API 2000 ÷ 10’000 Size: 1/2” ÷ 24”Pressure Class:ASME 150 ÷ 2500API 2000 ÷ 10’000

T2A

T3A

T2E

T3E

TWA

Other:• Special execution for any customer requirements• Adjustable Stem Packing

• ISO 5211 drilling on Top work.• Locking Device with or without padlock.

6

Trunnion MountedBall Valves

7

Mod. (FXX)

General Description

Additional Requirements

Range

Top Entry Trunnion Mounted Ball valve - One (1) piece body type - API 6D/ISO 14313 - “O-ring” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part. 2.

Top Entry Trunnion Mounted Ball valve - One (1) piece body type - API 6D/ISO 14313 - “Lip-seals” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part. 2.

M= Metal Seated

M= Metal seated

Size : 1/2” ÷ 24”Pressure Class :ASME 150 ÷ 2500API 2000 ÷ 10’000

Size : 1/2” ÷ 24”Pressure Class :ASME 150 ÷ 2500API 2000 ÷ 10’000

TEA

TEE

• Special execution for any customer requirements.• Adjustable Stem Packing.

• ISO 5211 drilling on Top work.• Locking Device with or without padlock.

Other:

8

Top Entry Ball Valves Trunnion Type

9

Combined D.B. & B. Ball Valves

Mod. (FXX)

General Description

Additional Requirements

Range

Combined Floating Ball valve - Two (2) Balls in one (1) piece Split body - “O-ring” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part. 2.

Combined Trunnion Mounted Ball valve - Two (2) Balls in one (1) piece Split body -“O-ring” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part. 2.

Combined Trunnion Mounted Ball valve - Two (2) Balls in one (1) piece Split body - “Lip seals” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part. 2.

Combined Top Entry Trunnion Mounted Ball valve - Two (2) Balls in one (1) piece Split body - “O-ring” primary seals - Soft seated - antistatic device & anti-blow-out stem. Double Block & Bleed - Self relieving - Fire Safe Design to API 6FA or API 607 or BS 6755 part. 2.

C = Cryogenic Service with Extended Bonnet

M = Metal seated M = Metal seated

C = Cryogenic Service with Extended Bonnet

M = Metal seated M = Metal seated

Size: 1/2” ÷ 6”x4”Pressure Class:ASME 150 ÷ 2500 Size: 1/2” ÷ 12”Pressure Class:ASME 150 ÷ 2500API 2000 ÷ 10’000 Size: 1/2” ÷ 12”Pressure Class:ASME 150 ÷ 2500API 2000 ÷ 10’000

Size: 1/2” ÷ 12”Pressure Class:ASME 150 ÷ 2500API 2000 ÷ 10’000

CFA

CTA

CTE

CTT

• Special execution for any customer requirements• Adjustable Stem Packing

• ISO 5211 drilling on Top work.• Locking Device with or without padlock.

Other:

10

11

Combined Trunnion Mounted Ball Valve (Two ball into one body)

Combined Floating Ball Valve 3/4” Class 600 RTJ/NPT - ASTM A182 F44 - Metal Seated.

Combined Trunnion Ball Valve12” Class 1500 RTJ

Technical Features

12

Base MaterialsCS, LTCS Carbon Steel, Low temperature carbon steelSS Austenitic Stainless steel; type 316DPX, SDP Ferritic/Austenitic Duplex steel, Superduplex steel6Mo Austenitic Stainless steel; type 6Mo

HS High strength low alloyed steelsNi Nickel alloy Ti TitaniumENP Electroless Nickel Plated on Base Materials.

Inspections and TestsHP Hydraulic High Pressure Shell & Seats testLP Gas Low Pressure Gas testHP Gas High Pressure Gas testFE Fugitive Emission test

PMI Positive Material Identification (check analysis)Functional Torque & Functional testCertifications All tests, Pressure and wetted steel parts to EN 10204 3.1

Special executionWOS Weld Overlay on Stem Seals AreaWOP Weld Overlay on Seat Seals Area (Seat pocket area)WOSP Weld overlay on Stem seals and Seat Seals Area (Stem & Seat pocket area)WOL Clad Weld overlay on all wetted internal surface

EGS Emergency Grease Injector for StemEGSS Emergency Grease Injector for Stem & SeatsEXB Extended Bonnet suitable for Cryogenic ServiceHOVF Tungsten or Chrome carbide overlay; High Velocity Oxygen Fuel (HVOF).

End Lateral ConnectionsRF Flanged End to ASME B16.5 - Riced Face typeRTJ Flanged End to ASME B16.5 - Ring Joint typeBW/WE* Welding End to ASME B16.25 Butt Weld type

CLAMP Hub Clamp end to Customer Machining drawingsSW* Socket Weld to ASME B16.11NPT Screwed End to ASME B2.1 NPT Female

* BW/WE or SW Ends may be supplied with transition pipe pieces (Pups) to avoid any risk of seat and seal damage during welding and post-welding heat treatment operations.

Finite Elements Analysis

Technical Data

13

Flow coefficient, or CV, by definition, is the volume of water in gallons per minutes at 60°F that will flow through a given element with a pressure drop of 1 psig .

Note: KV is the metric equivalent of CV; KV = CV x 0.85

Flow Coefficients (Cv)

1/2 16 14 12 11 11 103/4 44 38 34 31 30 291 90 78 69 65 63 471.1/2 227 211 187 167 163 902x1.1/2 145 145 140 120 120 1002 420 420 400 330 330 2502.1/2 690 690 610 520 510 3203×2 200 200 200 190 180 2003 1200 1050 1000 910 820 5004×3 600 600 600 590 550 5604 2200 2100 1850 1800 1700 11006×4 800 800 790 790 780 7456 5150 5100 4600 4380 3800 25008×6 2150 2150 2150 2150 2150 21508 9500 9400 9000 8500 7400 530010×8 4300 4300 4300 4450 4450 410010 15000 15000 14700 14500 11500 830012×10 7550 7550 7550 8000 9000 755014×10 6000 6000 6000 6100 6100 -12 23000 23000 22500 21100 18000 1300014×12 14000 14000 14000 12800 13000 -16×12 9100 9100 9100 8900 8900 -14 28000 28000 28000 25000 21000 -16×14 15000 15000 15000 14200 14100 -16 37200 37200 37200 34500 27500 -18×16 21000 21000 21000 19200 19000 -20×16 15300 15300 15300 13800 12000 -18 49000 49000 49000 45000 37000 -20×18 28400 28400 28400 25000 25000 -20 59000 59000 59000 55200 47800 -24×20 28200 28200 28000 25100 20600 -22 68200 68200 68200 62000 54000 -24 92000 92000 92000 83800 70000 -30×24 36000 36000 36000 32900 - -26 110000 110000 110000 98500 - -28 121000 121000 121000 113000 - -30 145000 144000 144000 130000 - -36×30 64000 64000 64000 61500 - -32 170000 170000 170000 151000 - -36×32 87000 87000 87000 69500 - -36 210000 210000 210000 198200 - -

NS (inch.) ASME 150 ASME 300 ASME 600 ASME 900 ASME 1500 ASME 2500

Maximum Allowable Stem Torque

1/2 15 18 464 18 464 18 464 18 464 18 464 21,5 790 3/4 20 18 464 18 464 18 464 18 464 18 464 21,5 790 1 25 18 464 18 464 18 464 18 464 18 464 21,5 790 1,5 40 21,5 790 21,5 790 21,5 790 21,5 790 21,5 790 32 2606 2 50 21,5 790 21,5 790 21,5 790 21,5 790 21,5 790 32 2606 3 80 32 2606 32 2606 32 2606 32 2606 32 2606 42 5892 4 100 32 2606 32 2606 42 5892 42 5892 48 8794 48 8794 6 150 42 5892 42 5892 48 8794 48 8794 55 13230 67 23917 8 200 48 8794 48 8794 48 8794 48 8794 80 40715 80 40715 10 250 55 13230 55 13230 55 13230 55 13230 80 40715 90 57971 12 300 55 13230 55 13230 65 21839 85 48836 90 57971 90 57971 14 350 65 21839 65 21839 85 48836 85 48836 95 68180 120 137414 16 400 65 21839 65 21839 85 48836 85 48836 95 68180 120 137414 18 450 80 40715 80 40715 95 68180 120 137414 120 137414 150 268386 20 500 80 40715 80 40715 95 68180 120 137414 120 137414 175 426187 22 550 85 48836 85 48836 120 137414 120 137414 150 268386 175 426187 24 600 90 57971 90 57971 120 137414 150 268386 150 268386 175 426187 26 650 95 68180 95 68180 120 137414 175 426187 175 426187 175 426187 28 700 110 105843 110 105843 150 268386 175 426187 175 426187 175 426187 30 750 120 137414 120 137414 150 268386 150 268386 175 426187 175 426187 32 800 120 137414 120 137414 150 268386 175 426187 175 426187 175 426187 34 850 120 137414 120 137414 150 268386 175 426187 175 426187 175 426187 36 900 120 137414 120 137414 150 268386 175 426187 175 426187 200 636174

Stem Material Group: F51 - AISI4140 - F6a Cl.2 - 17-4PH® - NITRONIC 50®.

NS DN 150# 300# 600# 900# 1500# 2500# (inch) (mm) Stem MAST Stem MAST Stem MAST Stem MAST Stem MAST Stem MAST

14

Special Features

15

Trunnion Mounted Ball Valve 10” Class 900 RF - ASTM A182 F51Metal seated

Trunnion Mounted Ball Valve 10” Class 2500 HUB - A694 F52

Actuated Trunnion Mounted Ball Valve 12” Class 1500 HUB

Trunnion Mounted Ball Valve 6” API 10’000 HUB - ASTM A182 F55 - Metal seated

Actuated Trunnion Mounted Ball Valve - 6” Class 900 RTJASTM A182 F44 Metal Seated

Top Entry Ball Valve (Trunnion Ball Type) - 3” Class 1500 HUB ends ASTM A182 F55 (MDS D54)

Actuated Trunnion Mounted Ball Valve 10” Class 1500 HUB

Actuated Trunnion Mounted Ball Valve 7.1/16” Class API 10’000 6BX-RTJ - A694 F60 (60K)

Test

16

48 hours Body High Pressure Gas TestRecording Equipment

Test EquipmentsPressure test

Trunnion Mounted Ball Valve 12” Class 900 RTJASTM A182 F51

17

Test Equipments Cryogenic Test Area

Test Equipments Fuggitive Emission (FE) & High Pressure Gas Test Area

Trunnion Mounted Ball Valve 20” Class 300 RF - ASTM 350 LF2 Fully Cladded Inconel 625

Applicable StandardsAnd RegulationsAPI - American Petroleum Institute

Spec. 6AISO 10423 Specification for Wellhead and Christmas Tree Equipment.Spec. 6DISO 14313 Specification for Pipeline Valves.Q1 Specification for Quality Programs for the Petroleum and Natural Gas.

17D Specification for Subsea Wellhead and Christmas Tree Equipment.598 Valve Inspection and Testing.607 Fire Test for Soft-Seated Quarter-Turn Valves.6FA Specification for Fire Test for Valves.

ASME - American Society of Mechanical EngineersB1.1 Unified Inch Screw ThreadsB16.5 Pipe Flanges and Flanged Fittings - (NPS ½ Through NPS 24)B16.10 Face-to-Face and End-to-End Dimensions of ValveB16.25 Butt-welded EndsB16.34 Valves Flanged, Threaded, and Butt-welded End

B16.47 Large Diameter Steel Flanges - (NPS 26 Through NPS 60)B31.8 Gas Transmission and distribution Piping SystemB36.10M Welded and Seamless Wrought Steel Pipe

EN - Euro Norme97/23/EC Pressure Equipment Directive (PED)94/9/EC Equipment and Protective systems intended for use in a potentially Explosive Atmospheres “ATEX”NACE National Association of Corrosion Engineers

MR 0175 Standard Material Requirements Sulfide Stress Cracking Resistant Metallic Material for Oilfield Equipment

ISO - International Organization Standardisation EN UNI ISO 9001: 2000 Quality Managenet System requirements EN UNI ISO 9000 Quality Managenet System - Foundaments and vocabulary

5211 Part-Turn Valve Actuator Attachment14313 Petroleum and Natural gas industries - Pipeline valves5208 Industrial Valves - Pressure testing of valves

BSI - British Standards Institution5351 Steel Ball Valves6364 Valves for Cryogenic Service6755-1 Testing of Valves6755-2 Testing of valves - Part 2. Specification for fire type testing requirements

BS EN 1503 Valves - Materials for bodies, bonnets and covers BS EN 10222 Steel forgings for pressure purposes

MSS - Manufacturers Standardization SocietySP-25 Standard Marking System for Valves, Fittings, Flanges and UnionsSP 44 Steel Pipeline FlangesSP 45 By-pass and drain connection standardSP-53 Magnetic Particle Examination MethodSP-54 Radiographic Examination Method

SP-55 Visual Method for Evaluation of surface IrregularitiesSP-72 Ball valves with flanged or butt-welding ends for general serviceSP-94 Ultrasonic Examination Method

18

ASTM - American Society for Testing and MaterialsA 105 Forgings, Carbon Steel, for Piping Components.A 350 Forgings, Carbon and Low-Alloy Steel, requiring Notch Toughness Testing for Piping Components.A 182 Forged or Rolled Alloy - Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High Temperature Service.A694 Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service.A564 Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes.A193 Alloy-Steel and Stainless Steel Bolting Materials for High-Temperature Service.A320 Alloy-Steel and Stainless Steel Bolting Materials for Low-Temperature Service.A194 Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service or Both.A453 High-Temperature Bolting Materials, with Expansion Coefficients Comparable to Austenitic Stainless Steels.A 216 Carbon Steel Castings Suitable for Fusion Welding for High-Temperature Service.

A 351 Austenitic Steel Castings for High Temperature Service.A 352 Ferritic Steel Castings for Pressure Containing Parts Suitable for Low Temperature Service.A276 Stainless Steel Bars.A479 Stainless Steel Bars and Shapes for use in Boilers and Other Pressure Vessels.A217 Martensitic Stainless Steel and Alloy Steel Castings for Pressure Containing Parts Suitable for High Temperature Service.A 370 Mechanical Testing of Steel Products.A106 Seamless Carbon Steel Pipe for High-Temperature Service.A333 Seamless and Welded Carbon Steel Pipe for Low-Temperature Service.A312 Seamless and Welded Austenitic Stainless Steel Pipes.B446 Standard Specification for Nickel Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel Chromium-Molybdenum-Tungsten Alloy (UNS N06650)* Rod and Bar.B564 Standard Specification for Nickel Alloy Forgings.

19

Memit Valves srlHead OfficeVia alla Chiesa, 4520030 Senago (MI) ItalyWorkshop & WarehouseVia Celeste Milani, 18/20 21040 Origgio (VA) ItalyPh. (+39) 02.96734128 Fax (+39) 02.96732549info@memitvalves.com

memitvalves.com

P. IVA 09929080969

Milano

Malpensa

Brescia

Bergamo

Bologna

Genova

Torino

A1

A4

A8

A2

A7

Origgio

AdverTime - MI