Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
© CompX National 2008
2
Through your CompX National distributor . . . a program to meet your lock requirements.CompX National manufactures a wide variety of locks for residential, commercial and industrial use. We’ve been solving security problems since the need for metal cabinet locks brought about the founding of our company in 1903.
The locks shown in this catalog are particularly well-suited to serve the replacement market...as well as component manufacturers. They have been proven in use.
Our experience in serving this market has shown us the importance of product quality, competitive pricing, proper packaging and immediate service and delivery. Working through your CompX National distributor, we offer a program that is committed to serving your needs.
ASSOCIATE MEMBER
ASSOCIATE MEMBER
ASSOCIATE MEMBER
A complete selection of locks• Dooranddrawerlocksforvirtuallyeveryapplication,everysecurity requirement.• Mailboxlocksforextraprofit,aswellasprotection.• Lockingdevicesofeverydescriptionforuseinschools,institutional and commercial buildings.• Keyblanksandkeyingkitstocomplementeachofourlocks.
Packaged for your convenience• All hardware is individually packed in see-thru poly-bags for product protection and easy inspection.• Poly-bagsoflikehardwarearegroupedinpopularquantitiesand placed in handy cases.• Casedesignedforconvenienceinstorageandeaseinhandling.• Casesarelabeledforquickidentification.
how cabinet locks are usedDOOR APPLICATION
Bolt or cam at side locks to frame.
LEFT HAND RIGHT HAND
Atwhichedgeofdoorhingesarelocateddetermines hand of door when facing door.
LID APPLICATION
Lockengagesstrikemounted on underside of lid.
SLIDING (By-pass) DOOR APPLICATION
Lockengagesstrikemountedonrear door.
SINGLE DRAWER APPLICATIONS
Drawermountedlock–Boltorcamlocks on frame.
Framemountedlock–Camlockson back of drawer front with hook cam engaging strike.
MULTIPLE DRAWER APPLICATIONS (Wood construction)
PEDESTAL/FILE
Side mounted gang lock –verticalbarmovementlocks all drawers simultaneously.
DESK
Centerdrawermountedlock–Boltlocks on frame or top. Side drawer mechanism(s) actuated by locked center drawer secures drawers.
PEDESTAL/FILE
Top drawer mounted lock activates side mechanism securing other drawers.
LATERAL FILE
Top drawer mounted lock activates side mechanisms securing other drawer(s); also allows only opening one drawer at a time.
finish codesFinish code applies to exposed portions of lock and is indicated by part number suffix, i.e.: C8053-3 Bright Brass finish.
2C–ZincPlated 4G–AntiqueBrass 26–BrightChrome 3–BrightBrass 14A–BrightNickel 26D–DullChrome 4–SatinBrass 19–Black (brushed)
key codesKeycodesstampingmayappearwithorwithoutzerosprecedingothernumbers,i.e.:C001AandC1Aarethesame key code.
3
table of contents
numerical index
Description Page
Cams ................................................................................... 17 & 23CamLocks .................................................................. 5, 7, 12 & 13CenterDrawerLockingHardware ................................................18ChestLocks .................................................................................19CircuitBreakerCabinetLock .......................................................21Code Books .................................................................................25CoolerLockingHandle .................................................................21DeskLocks ....................................................6,10,11,14,16&17DiscTumblerLocks ................................................................ 11-21Door&DrawerLocks ..........................6,7,10,11,14,16,17&22DualAxess® ..................................................................................22FileCabinetLocks ............................................................... 10 & 11FurnitureLocks ...................................................................... 14-19GangLocks ................................................................... 14,16&17GarageDoorLock ........................................................................21HandleLocks ...............................................................................20InterchangeableCylinderLocks .............................................. 6&7KeyBlanks .......................................................................... 24&25KeyHoleEscutcheon ...................................................................22KeyingKitsandParts ...................................................................26
Description Page
KnobLocks ..................................................................................10LateralFileLockingHardware .....................................................18LeverTumblerLocks ....................................................................22LidLocks ......................................................................................19LockerLocks ................................................................................22MailBoxLocks ........................................................................ 8 & 9MasterKeys .................................................................................25PedestalLockingHardware ......................................... 16,17,&18PinTumblerLocks .................................................................... 5-10RemovaCoreFurnitureLocks ................................................ 15-17Sample Boards .............................................................................27SCAdvantage ..............................................................................19ScrewdriverCamLatch ................................................................13Springs .........................................................................................26SlidingDoorLocks .............................................................. 10 & 11ShowcaseLocks ..........................................................................10Strikes ..........................................................................................22Tumblers .......................................................................................26WardedBarrelKeyLocks.............................................................19
Part No. Page
V69B-1 ..................... 27V69B-2 ..................... 27V69B-3 ..................... 27V69B-4 ..................... 27V69B-5 ..................... 27V69B-6 ..................... 27V69B-7 ..................... 27V69B-8 ..................... 27V69B-10 ................... 27V69B-12 ................... 27V69B-13 ................... 27V70P-1 ...................... 26V70P-2 ...................... 26V71D-3 ..................... 26V71D-4 ..................... 26C2001 ....................... 22C2002 ....................... 22C2003 ....................... 22C2004 ....................... 22C2005 ....................... 22C2006 ....................... 22C2007 ....................... 22C2008 ....................... 22C2015 ....................... 22C2016 ....................... 22C2017 ....................... 22C2018 ....................... 17C2073 ......................... 6C3730 ....................... 26C3731 ....................... 26C3732 ....................... 26C3733 ....................... 26C3734 ....................... 26C3735 ....................... 26C3736 ....................... 26C3737 ....................... 26C3738 ....................... 26C3740 ....................... 26C3741 ....................... 26C3742 ....................... 26C3743 ....................... 26C3744 ....................... 26C3745 ....................... 26C3746 ....................... 26C3747 ....................... 26C3750 ....................... 26C3751 ....................... 26C3752 ....................... 26C3753 ....................... 26C3754 ....................... 26C3755 ....................... 26C3756 ....................... 26C3757 ....................... 26C3758 ....................... 26
Part No. Page
C8764 ....................... 21C8765 ....................... 21D8776 ....................... 24D8777 ....................... 24D8778 ....................... 24D8779 ....................... 15D8780 ....................... 24D8781 ....................... 24D8782 ....................... 24D8783 ....................... 24D8784 ....................... 24D8785 ....................... 24D8786 ....................... 24D8787 ....................... 24D8788 ....................... 24D8789 ....................... 24D8790 ....................... 24D8791 ....................... 24D8792 ....................... 24D8793 ....................... 24D8794 ....................... 24D8795 ....................... 24D8796 ....................... 24C8797 ....................... 21C8798 ....................... 21D8798 ....................... 24D8799 ....................... 25 C8803 ....................... 14C8804 ....................... 14C8826 ....................... 19C8830 ....................... 16C8832 ....................... 16C8834 ....................... 16D8836 ....................... 16D8838 ....................... 17D8840 ....................... 17C8850 ....................... 15D8890 ....................... 25C8896 ....................... 11D8950 ....................... 18D8951 ....................... 18D8952 ....................... 18D8999 ....................... 25 C9001 ....................... 19C9003 ....................... 19C9009 ....................... 19C9011 ....................... 19C9100 ......................... 9C9200 ......................... 9
Part No. Page
C7111 ....................... 23C7112 ....................... 23C7113 ....................... 23C7114 ....................... 23C7115 ....................... 23C7116 ....................... 23C7163 ......................... 7D8001 ....................... 25D8002 ....................... 25C8030 ....................... 22C8031 ....................... 22C8042 ....................... 11C8043 ....................... 11C8046 ....................... 11C8047 ....................... 11C8051 ....................... 12C8052 ....................... 12C8053 ....................... 12C8054 ....................... 12C8055 ....................... 12C8060 ....................... 13C8062 ....................... 12C8065 ....................... 13C8070 ....................... 21C8073 ....................... 13C8075 ....................... 13C8080 ....................... 13D8090 ....................... 14C8101 ......................... 5C8102 ......................... 5C8103 ......................... 5C8106 ......................... 5C8108 ......................... 5C8109 ......................... 5C8131 ......................... 6C8133 ......................... 6C8135 ......................... 6C8137 ....................... 10C8139 ......................... 6C8140 ....................... 10C8142 ....................... 10C8143 ....................... 10C8150 ....................... 10C8154 ....................... 10C8155 ....................... 10C8160 ......................... 7C8161 ......................... 7C8163 ......................... 7C8173 ......................... 6C8174 ......................... 6C8175 ......................... 6C8177 ......................... 6C8178 ......................... 6C8179 ......................... 6
Part No. Page
C3759 ....................... 26D4290 ....................... 24D4291 ....................... 24D4292 ....................... 24D4293 ....................... 24D4295 ....................... 24D4296 ....................... 24D4297 ....................... 24D4299 ....................... 25D6676 ....................... 26D6680 ....................... 26D6682 ....................... 26D6686 ....................... 26C6782 ....................... 26C6783 ....................... 26C6784 ....................... 26C6785 ....................... 26C6786 ....................... 26C6787 ....................... 26C6788 ....................... 26C6789 ....................... 26C6790 ....................... 26C6791 ....................... 26C6792 ....................... 26C6793 ....................... 26C6794 ....................... 26C6795 ....................... 26C6796 ....................... 26C6797 ....................... 26C6798 ....................... 26C7001 ....................... 23C7002 ....................... 23C7003 ....................... 23C7004 ....................... 23C7005 ....................... 23C7006 ....................... 23C7007 ....................... 23C7008 ....................... 23C7009 ....................... 23C7010 ....................... 23C7011 ....................... 23C7012 ....................... 23C7013 ....................... 23C7014 ....................... 23C7015 ....................... 17C7020 ....................... 17C7021 ....................... 17C7022 ....................... 17C7101 ....................... 23C7102 ....................... 23C7103 ....................... 23 C7104 ....................... 23C7105 ....................... 23C7110 ....................... 23
Part No. Page
C8183 ......................... 7C8188 ......................... 7D8192 ....................... 25D8193 ....................... 25D8194 ....................... 25C8207 ....................... 19C8252 ....................... 19C8253 ....................... 19C8384 ....................... 19C8402 ....................... 22C8410 ....................... 22C8414 ....................... 19D8419 ....................... 25C8422 ....................... 22D8491 ....................... 25D8590 ....................... 25D8591 ....................... 25C8701 ....................... 11C8703 ....................... 14C8704 ....................... 14C8705 ....................... 14C8706 ....................... 14C8710 ......................8-9C8711 ......................8-9C8712 ......................8-9C8713 ......................8-9C8714 ......................8-9C8715 ......................8-9C8716 ......................8-9C8717 ......................8-9C8718 ......................8-9C8719 ......................8-9C8720 ......................8-9C8721 ......................8-9C8722 ......................8-9C8723 ......................8-9C8724 ......................8-9C8725 ......................8-9C8726 ......................8-9C8730 ......................... 9C8732 ......................... 9C8733 ......................... 9C8735 ......................... 9C8747 ....................... 20C8749 ....................... 20C8751 ....................... 20C8754 ....................... 20 C8755 ....................... 20C8756 ....................... 20C8757 ....................... 20C8758 ....................... 20C8759 ....................... 20C8762 ....................... 21C8763 ....................... 21
© CompX National 2008
4
The Family Of...
POBox200Mauldin,SC29662Phone:864-297-6655Fax:864-297-9987E-Mail:[email protected]
715 Center StreetGrayslake,IL60030Phone:847-752-2500Fax:847-752-2419E-Mail:[email protected]
715 Center StreetGrayslake,IL60030Phone:847-752-2600Fax:847-752-2420E-Mail:[email protected]
POBox200Mauldin,SC29662Phone:864-297-6655Fax:864-297-9987E-Mail:[email protected]
For more information, visit: compx.com
5
Position Position Applications: of shifter Applications: of shifter solid lines show locked on back solid lines show locked on back position of cam of lock position of cam of lock
Maximum Key Changes Type of Cylinder Material KA* Case Reference Key Part No. Mounting Length Thickness Codes KD MKKD Quantity Number Blank C8101-26D Liped/ 15/16” 5/8” 4 850 650 10 M2-0106B D4291
C8101-4 Overlay 15/16” 5/8” 2 850 10 M2-0106B D4291
C8102-26D Flush 1-1/16” 3/4” 4 850 650 10 M2-0106DF D4291
C8102-4 Flush 1-1/16” 3/4” 2 850 10 M2-0106DF D4291
C8103-26D 1-3/16” 7/8” 4 850 650 10 M2-0106L D4291
C8103-4 1-3/16” 7/8” 2 850 10 M2-0106L D4291
C8106-26D Flush 1-7/16” 1-1/8” 4 850 650 10 M2-0106MF D4291
C8106-4 Flush 1-7/16” 1-1/8” 2 850 10 M2-0106MF D4291
C8108-26D Flush 1-3/4” 1-3/8” 4 850 650 10 M2-0106NF D4291
C8108-4 Flush 1-3/4” 1-3/8” 2 850 10 M2-0106NF D4291
C8109-26D 1-3/4” 1-1/2” 4 850 650 10 M2-0106N D4291
C8109-4 1-3/4” 1-1/2” 2 850 10 M2-0106N D4291
Lipped/Overlay
Lipped/Overlay
pin tumbler cylinder cam locksThroughtheuseofashifter,the360°keyturnturnsthecam90°ineitherdirection.Actual applicationdetermineswhichcamposition is the lockedposition.Eachlock is furnished with an alternate cam for opposite cam turn.
APPLICATION – For drawer, R.H. or L.H. doors. C8103 andC8109 are for lipped or overlay construction. For overlay application, the combined thickness of front and frame cannot exceed thecylinder length.Alsoseeoverlaydetailbelow.Theother locks are for flush application.OPERATION–90°camturn,keyremovableinbothlockedandunlocked positions.KEYING – Will key together with all other pin tumbler locksusingD4291keyblankexceptlocksshownonpages8and9.Seetableforavailablekeying.MasterkeyingtoGM1.PACKAGING – Supplied with two keys, trim washer, spurwasher for wood, mounting nut and two cams. If flat washer (for metal) is needed, order C2015-2C separately. See page 22.
CAM DIMENSIONS
LIPPED/OVERLAY
C8102
OVERLAYSpecific cams to be used with C8102 lock are available for overlay construction using a 3/4” thick frontand 3/4” thickframe. See page 23 for details.
LIPPED/OVERLAY
C8101C8103C8109
*KeyCodesused:2Codes–107and915. 4Codes–101,103,107and915.
FLUSH
C8106C8108
FLUSH
TheC8102,asshownabove inbothpictures, isaMulti-FunctionalPinTumblerCamLockwitha1–1/16”CylinderLength. The lock ispackagedwith four (4)cams, twostraight and two double formed. This allows the lock to be used for multiple applications foreitherdrawerorrighthand/lefthanddoorswithlippedoroverlayconstruction.
OVERLAY
MOUNTING HOLES FOR CYLINDER CAM LOCKS
Metal Wood
BRASS CONSTRUCTION
Lipped/Overlay
© CompX National 2008
6
Bolt Cylinder Bolt KA* Key Changes Case Reference Key Part No. Installation Type Length Travel Codes KD MKKD Quantity Number Blank C8173-26D Door Dead 7/8” 3/4” 4 850 650 10 M2-3713-301 D4291
C8173-4 Door Dead 7/8” 3/4” 2 850 650 10 M2-3713-301 D4291
C8173-4G Door Dead 7/8” 3/4” 2 850 — 10 M2-3713-301 D4291
C8174-26D Door Dead 1-1/8” 3/4” 4 850 650 10 M2-3713-311 D4291
C8175-26D Door Dead 1-3/8” 3/4” 4 850 650 10 M2-3713-321 D4291
C8178-26D Drawer Dead 7/8” 3/4” 4 850 650 10 M2-3718-301 D4291
C8178-4 Drawer Dead 7/8” 3/4” 2 850 — 10 M2-3718-301 D4291
C8178-4G Drawer Dead 7/8” 3/4” 2 850 — 10 M2-3718-301 D4291
C8177-26D Drawer Dead 1-1/8” 3/4” 4 850 — 10 M2-3718-311 D4291
C8179-26D Drawer Dead 1-3/8” 3/4” 4 850 650 10 M2-3718-321 D4291
C8179-4 Drawer Dead 1-3/8” 3/4” 2 850 — 10 M2-3718-321 D4291
pin tumbler door & drawer locks
APPLICATION–Fordrawers,R.H.orL.H.doors.Surfacemounted.Requires57/64”dia.holeforcylinder.OPERATION – Key removable in both locked and unlockedpositions.KEYING–Willkey togetherwithallotherpin tumbler locksusingD4291keyblankexceptlocksshownonpages8and9.Seetableforavailablekeying.MasterkeyingtoGM1.PACKAGING–Suppliedwithtwokeys,strikeandmountingscrews.If trim ring is required, order C2017 separately. See page 22.
APPLICATION–Fordrawers.Halfmortisetyperequiresmortisefor housing and 57/64” dia. hole for cylinder. C8139 is surfacemounted.OPERATION – Key removable in both locked and unlockedpositions except C8131 and C8139.KEYING–WillkeytogetherwithallotherpintumblerlocksusingD4291keyblankexceptlocksshownonpages8and9.Seetableforavailablekeying.MasterkeyingtoGM1.PACKAGING–Supplied with two keys, strike and mounting screws. If trim ring is required, order C2017 separately. See page 22.
C8177, C8178, C8179
C8173, C8174, C8175
C8133, C8135 C8131C8139
Bolt Cylinder Bolt KA* Key Changes Case Reference Key Part No. Installation Type Length Travel Codes KD MKKD Quantity Number Blank C8131-26D** Drawer Spring 7/8” 7/32” 4 850 650 10 M2-3701-121 D4291
C8131-4** Drawer Spring 7/8” 7/32” 2 850 — 10 M2-3701-121 D4291
C8133-26D Drawer Dead 7/8” 1/4” 4 850 — 10 M2-3700-111 D4291
C8133-4 Drawer Dead 7/8” 1/4” 2 850 — 10 M2-3700-111 D4291
C8135-26D Drawer Dead 1-1/8” 1/4” 4 850 — 10 M2-3700-159 D4291
C8139-26D** Door Spring 3/4” 7/32” 4 850 650 10 M2-3719-092 D4291
*KeyCodesused:2Codes–107and915. 4Codes–101,103,107and915.**Keyremovableinlockedpositiononly.
MOUNTING HOLE
ThePLUSfeatureallowsyoutoremovethe cylinder from our pin tumbler box locks while the lock remains in place. No mounting screws need to beremoved.Simplyusea5/64”allenwrench from the back to remove the cylinder and plug for re-keying.
“THE ADVANTAGE PLUS”
MOUNTING HOLEAdditionalmortise
required for mounting.
1/8”blackplasticspacer for pin tumbler door and drawer locks. Packed25pcs.per bag.
C2073
To see a video of Advantage PLUS+ visit CompX online:compx.com/advplus
For more information, visit: compx.com
7
Bolt Cylinder Bolt KA* Key Changes Case Reference Key Part No. Installation Type Length Travel Codes KD MKKD Quantity Number Blank C8163-26D Drawer Dead 15/16” 11/32” 4 850 650 10 M2-3705 D4291
C8163-4 Drawer Dead 15/16” 11/32” 4 850 650 10 M2-3705 D4291
Type of Minimum Mounting or Bolt Material Bolt Key changes Case Reference Key Part No. Installation Type Thickness Travel KD Quantity Number Blank C8160-26D InHousing — — — 100 10 M2-3720-025 D4292
C8161-26 Drawer Dead 7/8” 9/32” — 10 M3-3720-011 —
pin tumbler drawer locks
pin tumbler door & drawer locks
pin tumbler drawer lock
APPLICATION–Fordrawers.Surfacemounted.Requires57/64”dia.hole for cylinder.OPERATION–Keyremovableinbothlockedandunlockedpositions.KEYING–WillkeytogetherwithallotherpintumblerlocksusingD4291key blank except locks shown on pages 8 and 9. See table for available keying.MasterkeyingtoGM1.PACKAGING–Supplied with two keys and mounting screws. If trim ring is required, order C2017 separately. See page 22.
APPLICATION–Replacementlockhousingandcylinderfordrawerswith7/8”thickfronts.Halfmortisedesign.OPERATION – Key removable in both locked and unlocked positions.Interchangeable cylinders are attached or removed through the use of a special key at back of lock.KEYING–Keyeddifferently(100changes).PACKAGING – C8160 cylinder supplied with two keys. C8161 lockhousing supplied with cylinder removal key and mounting screws.
PACKAGING –Suppliedwith twokeys, extrabackplate, twocams and two mounting screws. If trim ring is required, order C2017 separately. See page 22. Note: If formed cam is required, orderC7113orC7116.Seepage23.
C8163 locks feature easyremoval of cylinder from lock housing while lock remains in place. Bolt has access hole for cylinder retention screw at back of lock. U.S. Patent No.4.899.563.
Extended bolt forC8163 drawer lockprovides3”extension,can be cut to required length. Packed 20pcs. per bag.
“THE ADVANTAGE PLUS”CAM LOCKS
The locks are fastened in place with two screws for easy installation. Re-keying or servicing is accomplished by removingthecamretainingscrewandcam.Usea5/64”allen wrench to remove the plug cylinder assembly. The mounting plate remains installed on the cabinet. Re-key as required and reinstall cylinder plug assembly on mounting plate.
U.S. PATENT NO. 5.678.438
C8163
C7163-2C
“THE ADVANTAGE PLUS”
C8183AssembledasaDoorLock
C8161 C8160
Maximum Key Changes Type of Cylinder Material KA* Case Reference Key Part No. Mounting Length Thickness Codes KD MKKD Quantity Number Blank C8183-26D 7/8” 7/8” 4 850 650 10 M2-8183 D4291
C8188-26D 1-3/8” 1-3/8” 4 850 650 10 M2-8188 D4291Flush
*KeyCodesused:4Codes–101,103,107and915.
MOUNTINGHOLE
ONELOCK,TWOFUNCTIONSDOORORDRAWER
MOUNTINGHOLE
C8188AssembledasaDrawerLock
PartNo.:M337201341W010J for replacement cylinder removal keys.
APPLICATION–Fordrawer,R.H.orL.H.doors.C8183assembledfor door function. C8188 assembled for drawer function.OPERATION–90°camturn,keyremovableinbothlockedandunlocked positions.KEYING–WillkeytogetherwithallotherpintumblerlocksusingD4291keyblankexceptlocksshownonpages8and9.Seetableforavailablekeying.MasterkeyingtoGM1.
© CompX National 2008
8
pin tumbler mail box locksGENUINE FACTORY REPLACEMENT LOCKS
APPLICATION – For doors on architecturalmail boxes serviced byUnitedStatesPostalService.OPERATION–90°camturn.Seedrawingforspecificoperation.Keyremoval in locked position only.KEYING–Availablekeyeddifferentlyonly(100changes).PACKAGING – Suppliedwith two keys and a springmounting clip.C8720 furnished with trim ring.
*C8712 and C8720 are provided with a threaded cylinder, with proper clip grooving.
C8710
C8711 C8712* C8713 C8714
C8715 C8716 C8717 C8718
C8719 C8720* C8721 C8722
SPRINGMOUNTING
CLIP
MOUNTINGHOLE FORALL LOCKS
C8723 C8724 C8725 C8726
For more information, visit: compx.com
9
Locked Direction Key Cam of Turn Changes Case Key Part No. Position to Open Replaces KD Qty. Blank C8710 Left 90°c/cw BommerIndustries 100 25 D4291
C8711 Up 90°c/cw BommerIndustries 100 25 D4291
C8712 Down 90°c/cw BommerIndustries 100 25 D4291
C8713 Left 90°c/cw AuthElectric—Alsoreplaces 100 25 D4291 BommerLockB25-300usedon Bommer Box No. 9015 (sleeve inside box must be removed) C8714 Left 90°c/cw AmericanDevice 100 25 D4291
C8715 Up 90°c/cw FlorenceMfg. 100 25 D4291
C8716 Up 90°cw S.H.Couch 100 25 D4291
C8717 Left 90°c/cw Nutone 100 25 D4291
C8718 Left 90°c/cw CutlerMailChute 100 25 D4291
C8719 Up 90°c/cw Miami-Carey 100 25 D4291
C8720 Down 90°cw DuraSteel 100 25 D4291
C8721 Left 90°c/cw Permabit—XL-201 100 25 D4291
C8722 Down 90°cw DuraSteel—XL-202 100 25 D4291
C8723 Left 90°c/cw JensenGeneral 100 25 D4291
C8724 Left 90°c/cw BommerIndustries 100 25 D4291
C8725 Left 90°c/cw CutlerFederal 100 25 D4291
C8726 Right 90°cw Riopel—Canada 100 25 D4291
Direction of Key Changes Case Key Part No. Installation Turn to Open KD Quantity Blank C8730 Architecturalmail 90°c/cw 100 25 D4291 box fronts C8732 SameasC8735w/ocams 90°cw 100 25 D4291
C8733 SameasC8735w/ocams 90°c/cw 100 25 D4291
C8735 Doorofpedestalmounted 90°cw 100 25 D4291 neighborhood boxes
pin tumbler mail box locks
pin tumbler “multi-cam”™ mail box locks
APPLICATION – Interior architectural mail boxes used inapartments, condominiums, schools, lobbies. Nut or clip mounted.OPERATION–90°counter-clockwisecamturntoopen.Keyremovable in locked position only.KEYING–Availablekeyeddifferentlyonly(100changes).PACKAGING–Suppliedwithselectionoffivecams,twokeys,mounting nut, mounting clip and cam screw.
APPLICATION – Exterior pedestal-mounted neighborhoodboxes. Has keyway dust shutter for lock protection. Clipmounted.OPERATION–90°clockwisecamturntoopen.Keyremovablein locked position.KEYING–Availablekeyeddifferentlyonly(100changes).PACKAGING – Supplied with a selection of five cams, twokeys, mounting clip, cam locking nut.
Auth Electric
AmericanDevice
Florence Mfg.
Bommer Industries Miami-Carey
Auth Electric
Florence Mfg.
Bommer Industries
Cutler-Federal
Superior
C8730
C8735
THIS LOCK MEETS U.S.P.S. SPECIFICATION #L-1172 AND DRAWING #1003833 FOR NDCBU AND CBU APPLICATIONS.
MOUNTINGHOLE FORALL LOCKS
“MULTI-PURPOSE”
New Mailbox Lock – C9100 & C9200
w Only mailbox lock to meet and exceed UnitedStatesPostalService specification “USPS-L-1172C”
w Lockcanwithstand1000pounds of force applied to the cam.
w Accommodatesup to3/16”thickcam
w Drainholesonthebottomof the cylinder
w Includes: a spring clip, mounting nut and (3) keys
w C9100 operates clockwise
w C9200 operates counter clockwise
w Willbeshippedw/ocamfor replacement of locks for newStandard4CboxesshippedonlytoUSPS
KeyBlankcodes:StandardPartno.D4300
ReversePartno.D4301
1000 - 1999 2000 - 29993000 - 3999 4000-4999
New cutout
© CompX National 2008
10
pin tumbler drawer locks
pin tumbler sliding door, file cabinet locks
pin tumbler knob locks
APPLICATION–Forcenterdrawersofmetaldesks.Fitsspecialpiercingofdrawerfront and selvedge (see drawing).OPERATION–Keyremovableinbothlockedandunlockedpositions.KEYING–Willkey togetherwithallotherpin tumble locksusingD4291keyblankexceptlocksshownonpages8&9.Seetableforavailablekeying.MasterkeyingtoGM1.PACKAGING–Suppliedwithtwokeysandmountingnut.Part No.: M337272116X150J–Replacementinsertablebolts.
APPLICATION–C8140isforslidingglassdoors.C8142andC8143areforwoodslidingdoorsandrequirea7/8”dia.holeinfront door for cylinder. C8150 is used internally on filing cabinets to gang lock drawers.OPERATION – C8140 and C8150: key removable in lockedpositiononly.C8142andC8143:keyremovableinbothlockedand unlocked positions.KEYING – Will key together with all other pin tumbler locksusingD4291keyblankexceptlocksshownonpages8&9.Seetableforavailablekeying.MasterkeyingtoGM1.PACKAGING – Supplied with two keys. C8142 and C8143furnished with strike and mounting screws. If trim ring is required, order C2017 separately. See page 22.
APPLICATION–Formetalcabinetsdoors.ReversibleforR.H.orL.H.application.Latchplate is used for either in 2** or 3 point latching.OPERATION–90°turntoopen.Choiceofkeyoperation,seetable.KEYING–WillkeytogetherwithallotherpintumblerlocksusingD4291keyblankexceptlocksshownonpages8&9.Seetableforavailablekeying.MasterkeyingtoGM1.PACKAGING–Suppliedwithtwokeys,mountingnutandscrewforlatchplate.
**Install with tongue pointing away from jamb.
C8137
C8142C8143
C8140
C8150
C8154, C8155
Bolt Cylinder Bolt KA* Key Changes Case Reference Key Part No. Installation Type Length Travel Codes KD MKKD Quantity Number Blank C8137-26D MetalDrawer, Reinforced 19/32” 7/16” 4 850 650 10 M2-3727-001 D4291 1/4”MaxMat’l Insertable Thickness DeadBolt
*KeyCodesused:4Codes–101,103,107and915.
Bolt Cylinder Bolt KA* Key Changes Case Reference Key Part No. Installation Type Length Travel Codes KD MKKD Quantity Number Blank C8140-26D PlateGlass Internal — — 4 100 — 10 M2-0225-001 D4291 SlidingDoors Spring C8142-26D SlidingDoors Plunger 1-1/8” 7/16” 6 100 100 10 M2-3707-157 D4291 C8142-4 SlidingDoors Plunger 1-1/8” 7/16” 2 100 — 10 M2-3707-157 D4291 C8143-26D SlidingDoors Plunger 1-3/8” 7/16” 4 100 — 10 M2-3707-160 D4291 C8143-4 SlidingDoors Plunger 1-3/8” 7/16” 2 100 — 10 M2-3707-160 D4291 C8150-26D FilingCabinet Spring — 1/8” 5 850 — 10 M2-4847-001 D4291
*KeyCodesused:2Codes–107and915. 4Codes–101,103,107and915. 5Codes–101,102,103,107and915. 6Codes–101,103,105,106,107and915.
Maximum Material KA* Key Case Reference Key Part No. Installation Operation of Key Thickness Codes Changes KD Qty. Number BlankC8154-26D Door KeyRemovableinBoth 1/8” 3 650 10 M2-0721-010 D4291 LockedandUnlockedPositions w/M3-6921C8155-26D Door KeyRemovableinLocked 1/8” 1 650 10 M2-0721-060 D4291 PositionOnly w/M3-6921
*KeyCodesused:1Code–915. 3Codes–103,107and915.
MOUNTING HOLES
L.H. Door R.H. Door
MOUNTING HOLES
For more information, visit: compx.com
11
C8047
Key Changes Non MK
Bolt Cylinder Bolt KA* Case Reference Key Part No. Installation Type Length Travel Codes KD MKKD Quantity Number Blank C8701-14A MetalDrawer,1/4” ReinforcedInsertable 19/32” 11/32” 6 200 200 25 M4-0344-001 D8785 max.mat’l.thickness DeadBolt
C8896-26D DeskDrawer Dead 1/2” 5/8” 1 50 — 10 M4-5596-001 D8785
disc tumbler drawer locks
disc tumbler sliding door locks
disc tumbler file cabinet locks
APPLICATION – C8701: for center drawers of metal desks.Fits special piercing of drawer front and selvedge (see drawing). C8896isaspecificreplacementlock.OPERATION – Key removable in both locked and unlockedpositions.KEYING–C8701willkey togetherwithallotherdisc tumblerlocks using D8785 key blank. See table for available keying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING–Suppliedwithtwokeys.C8701furnishedwithmounting nut.Part No.: M503441026X150J–Replacementinsertableboltsfor C8701.
APPLICATION–Forwoodslidingdoors.Requiresa7/8”dia.holein front door for cylinder.OPERATION – C8042: push in cylinder, key turn engages boltbehindstrike.C8043:pushingincylinderlocksdoors.Keyremovablein both locked and unlocked positions.KEYING–WillkeytogetherwithallotherdisctumblerlocksusingD8785keyblank.Seetableforkeying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING–Supplied with two keys, strike and mounting screws. If trim ring is required, order C2017 separately. See page 22.
APPLICATION–Usedinternallyonfilingcabinetstoganglockdrawers.OPERATION–Keyremovableinlockedpositiononly.KEYING–Keyedonlyto“Pundra”keyway.Seetableforavailablekeying.PACKAGING–Suppliedwithtwokeys.
C8701C8896
C8046
Key Changes Non MK
Bolt Cylinder Bolt KA* Case Reference Key Part No. Installation Type Length Travel Codes KD MKKD Quantity Number Blank C8042-26D SlidingDoors 90°TurnHook 7/8” 7/16” 3 200 — 10 M4-0057-001 D8785
C8043-26D SlidingDoors Plunger 1” 7/16” 6 200 200 10 M4-0055 D8785
C8043-3 SlidingDoors Plunger 1” 7/16” 6 200 — 10 M4-0055 D8785
C8043-14A SlidingDoors Plunger 1” 7/16” 6 200 — 10 M4-0055 D8785
*KeyCodesused:1Code–C415A. 3Codes–C346A,C413AandC415A. 6Codes–C346A,C390A,C413A,C415A,C420AandC642A.
Bolt Bolt KA* Key Changes Case Reference Key Part No. Installation Type Travel Codes KD MKKD Quantity Number Blank C8046-26 FilingCabinet Spring 1/8” 1 200 — 10 P4-3003 D8776
C8047-26 FilingCabinet Spring 1/8” 1 200 — 10 P4-3012 D8776
*KeyCodesused:1Code–P141A.
MOUNTING HOLES
C8042
C8043
MOUNTING HOLE
REPLACEMENT FOR“SHAW WALKER”
© CompX National 2008
12
Maximum Key Type of Cylinder Material KA* Changes Case Reference Key Part No. Mounting Length Thickness Codes KD Quantity Number Blank C8062-14A Overlayor 7/8” 9/16” 1 100 25 M4-0300 D8777 Flush SK1
disc tumbler cylinder cam locks
disc tumbler reversible key cam locks
APPLICATION – Fordrawers,R.H.or L.H.doorswith lipped/overlay construction (straight cam) or flush construction (formed cam). For overlay application, the combined thickness of front and framecannotexceed thecylinder length.Alsoseeoverlaydetail at above right.OPERATION–90°camturnonalllocks.Keyremovableinbothlocked and unlocked positions.KEYING – Will key together with all other disc tumbler locksusing D8785 key blank. See table for available keying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING – Supplied with two keys, trim washer, spurwasher (for wood), mounting nut and two cams. If flat washer (for metal) is needed, order C2015-2C separately. See page 22.
APPLICATION – For drawers, R.H. or L.H. doorswith overlay (straightcam) or flush (formed cam) construction. For overlay application, the combined thickness of front and frame cannot exceed the 7/8” cylinderlength. See above for mounting hole detail.OPERATION–90°camturn.Keyremovableinbothlockedandunlockedpositions.KEYING–Reversiblekeyoperation.KeyedtoSKSeries;doesnotkeywithother disc tumbler locks in this catalog. See table for available keying.PACKAGING–Suppliedwithtwokeys,spurwasher(forwood),mountingnut and two cams. If flat washer (for metal) is needed, order C2015-2C separately. See page 22.
Lock furnishedwith straight cam assembled.
TheC8053lockusingtheC7014cam accommodates overlay constructionusinga3/4” thickfrontand3/4”thickframe.Seepage 23 for details.
LOCK APPLICATION
LIPPED/OVERLAY
OVERLAY
FLUSH
C8051C8052, C8053C8054, C8055
Locksfurnishedwithstraight cams assembled
OVERLAYFLUSH
C8062 REVERSIBLEKEY
Maximum Key Changes Non MK Type of Cylinder Material KA* Case Reference Key Part No. Mounting Length Thickness Codes KD MKKD Quantity Number Blank C8051-14A 7/16” 7/64” 6 200 200 25 M4-0553 D8785
C8051-3 7/16” 7/64” 3 200 — 25 M4-0553 D8785
C8052-14A 5/8” 15/64” 6 200 200 25 M4-0054 D8785
C8052-3 5/8” 15/64” 3 200 — 25 M4-0054 D8785
C8054-14A 15/16” 5/8” 6 200 200 25 M4-0054B D8785
C8054-3 15/16” 5/8” 3 200 — 25 M4-0054B D8785
C8054-4G 15/16” 5/8” 3 200 — 25 M4-0054B D8785
C8053-14A 1-3/16” 7/8” 6 200 200 25 M4-0054C D8785
C8053-3 1-3/16” 7/8” 6 200 200 25 M4-0054C D8785
C8053-4G 1-3/16” 7/8” 6 200 200 25 M4-0054C D8785
C8055-14A 1-7/16” 1-1/8” 6 200 200 25 M4-0054L D8785
C8055-3 1-7/16” 1-1/8” 6 200 200 25 M4-0054L D8785
C8055-4G 1-7/16” 1-1/8” 6 200 200 25 M4-0054L D8785
Lipped/Overlay
orFlush
*KeyCodesused:3Codes–C346A,C413AandC415A. 6Codes–C346A,C390A,C413A,C415A,C420AandC642A.
MOUNTING HOLES FOR ALL CAM LOCKS
Metal Wood
CAM DIMENSIONS
For more information, visit: compx.com
13
C8080
Maximum Type of Cylinder Material Case Reference Part No. Mounting Length Thickness Quantity Number*C8065-14A Lipped,Overlay 5/8” 1/4” 25 M6-4540 or Flush
disc tumbler cylinder cam locks
screwdriver cam latch
APPLICATION – Fordrawers,R.H.or L.H.doorswith lipped/overlay construction (straight cam) or flush construction (formed cam). For overlay application, the combined thickness of front and framecannotexceed thecylinder length.Alsoseeoverlaydetail at above right.OPERATION – Choice of either 90° or 180° cam turn. Keyremovable in both locked and unlocked positions.KEYING – Will key together with all other disc tumbler locksusing D8785 key blank. See table for available keying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING–Suppliedwithtwokeys,trimwasher,spurwasher(for wood), mounting nut, two cams and two stop washers. If flat washer (for metal) is needed, order C2015-2C separately. See pg. 22.
APPLICATION – For doors and drawers. Surface mounted.Requires3/4”dia.holeforcylinderOPERATION – Choice of either 90° or 180° cam turn. Keyremovable in both locked and unlocked positions.KEYING –Will key together with all other disc tumbler locksusingD8785 key blank. See table for available keying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING–Supplied with two keys, two mounting screws, two formedcamsandtwostopwashers.Assembledfor90°camturn.
APPLICATION–Fordrawersordoorsthatdonotrequireakeyforlocking.OPERATION–flexafunction™featureprovideschoiceof90°or180°camturn.Camsaredouble punched for flexability in mounting latch.PACKAGING–Supplied with two cams, two stop washers, spur washer and mounting nut.
C8060, C8073, C8075Assembledwithstraightcamand90°camrotation.
MOUNTING HOLES FOR CYLINDER CAM LOCKS
Metal Wood TheC8073lockusingtheC7014cam accommodates overlay constructionusinga3/4” thickfrontand3/4”thickframe.Seepage 23 for details.
LOCK APPLICATION
LIPPED/OVERLAY
OVERLAY
FLUSH
with flexafunction™180°90°
with flexafunction™90°180°
90°180°with flexafunction™
C8065
Maximum Key Changes Non MK Type of Cylinder Material KA* Case Reference Key Part No. Mounting Length Thickness Codes KD MKKD Quantity Number Blank C8060-14A 1-3/4” 1-7/16” 6 200 200 25 M4-8060 D8785
C8060-3 1-3/4” 1-7/16” 6 200 200 25 M4-8060 D8785
C8060-4G 1-3/4” 1-7/16” 6 200 200 25 M4-8060 D8785
C8073-14A 1-3/16” 7/8” 6 200 200 25 M4-8073 D8785
C8073-3 1-3/16” 7/8” 6 200 200 25 M4-8073 D8785
C8073-4G 1-3/16” 7/8” 6 200 200 25 M4-8073 D8785
C8075-14A 1-7/16” 1-1/8” 6 200 200 25 M4-8075 D8785
C8075-3 1-7/16” 1-1/8” 6 200 200 25 M4-8075 D8785
C8075-4G 1-7/16” 1-1/8” 6 200 200 25 M4-8075 D8785
**C8080-14A 7/8” 7/8” 6 200 200 25 M4-8080 D8785
**C8080-3 7/8” 7/8” 6 200 200 25 M4-8080 D8785
**C8080-4G 7/8” 7/8” 6 200 200 25 M4-8080 D8785
Lipped/Overlay
orFlush
*KeyCodesused:6Codes–C346A,C390A,C413A,C415A,C420AandC642A.
CAM DIMENSIONS
* Not available with FlexaCamTM
** Not available with FlexaCamTM
Alllocksfeature
flexafunction™Stop washers provide for either180°or90°camturn.
AlllocksfeatureFlexaCam™
Three spacers enclosed with every CompX National threaded disc tumbler cam lock offerthreethicknesses–providingupto12
different dimensional variations.
© CompX National 2008
14
disc tumbler door & drawer locks
disc tumbler gang lock
APPLICATION – For drawers and doors. Surface mounted.Requires7/8”dia.holeforcylinder.OPERATION – Key removable in both locked and unlockedpositionsexceptC8706.KEYING –Will key togetherwith all other disc tumbler locksusingD8785keyblank.See table foravailablekeying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING–Suppliedwithtwokeysandmountingscrews.C8706furnishedwithstrike.Iftrimringisrequired,orderC2017separately. See page 22.
APPLICATION – For locking drawers in deskpedestals and other multiple drawer applications. Requires7/8”dia.holeforcylinderanddadoforbar,measuring7/8”x1/8”deeponinsideofpanel.OPERATION –Key removable inboth lockedandunlocked positions. Turning the key locks all drawers simultaneously (drawers must be in closed position). Bar moves studs into notch in drawer or slide, thus preventing drawer movement.KEYING – Will key together with all other disctumbler locksusingD8785keyblank.Seetableforavailablekeying.MasterkeyingtoE41AusingD8783key blank.PACKAGING – Supplied with two keys, threelocking studs, three stud slides, saddle and mounting screws. If trim ring is required, order C2017 separately. See page 22.
Cylinder is located near
top of pedestal.
Saddle reverses for mortise application.
C8703, C8705
C8803
*C8804
C8706
C8704
D8090
Key Changes Non MK Bolt Cylinder Bolt KA* Case Reference Key Part No. Installation Type Length Travel Codes KD MKKD Quantity Number BlankC8703-14A Drawer Dead 15/16” 11/32” 6 200 200 25 M4-6707-170 D8785
C8703-3 Drawer Dead 15/16” 11/32” 6 200 200 25 M4-6707-170 D8785
C8703-4G Drawer Dead 15/16” 11/32” 6 200 200 25 M4-6707-170 D8785
C8704-14A Door Dead 15/16” 11/32” 6 200 200 25 M4-6707-172 D8785
C8704-3 Door Dead 15/16” 11/32” 6 200 200 25 M4-6707-172 D8785
C8704-4G Door Dead 15/16” 11/32” 6 200 200 25 M4-6707-172 D8785
C8705-14A Drawer Dead 1-3/16” 11/32” 3 200 200 25 M4-6707-171 D8785
C8705-3 Drawer Dead 1-3/16” 11/32” 3 200 200 25 M4-6707-171 D8785
C8705-4G Drawer Dead 1-3/16” 11/32” 3 200 — 25 M4-6707-171 D8785
C8706-3 Drawer Spring 15/16” 9/32” 3 200 — 25 M4-6708-170 D8785
C8803-14A Drawer Dead 15/16” 11/32” 6 200 200 25 M4-8803-001 D8785
C8803-3 Drawer Dead 15/16” 11/32” 6 200 200 25 M4-8803-001 D8785
C8803-4G Drawer Dead 15/16” 11/32” 6 200 200 25 M4-8803-001 D8785
C8804-14A Door Dead 15/16” 11/32” 6 200 200 25 M4-8804-001 D8785
C8804-3 Door Dead 15/16” 11/32” 6 200 200 25 M4-8804-001 D8785
C8804-4G Door Dead 15/16” 11/32” 6 200 200 25 M4-8804-001 D8785
*KeyCodesused:3Codes–C346A,C413AandC415A. 6Codes–C346A,C390A,C413A,C415A,C420AandC642A.
MOUNTING HOLE
Additional7/8”x1/8”deepdado for bar required on inside of panel.
MOUNTING HOLE
Key Changes Non MK Bar Cylinder Bar KA* Case Reference Key Part No. Installation Operation Length Travel Codes KD MKKD Quantity Number BlankD8090-14A 15/16” 11/32” 6 200 200 5 M4-6709-124 D8785
D8090-3 15/16” 11/32” 6 200 — 5 M4-6709-124 D8785
D8090-4G 15/16” 11/32” 6 200 — 5 M4-6709-124 D8785
*KeyCodesused:6Codes–C346A,C390A,C413A,C415A,C420AandC642A.
DeskPedestalsor Similar
Multi-DrawerConditions
DeadLocking
* This item will be discontinued when inventory
is depleted.
For more information, visit: compx.com
15
disc tumbler furniture locks
plug core for furniture locksAPPLICATION–OnePlugFitsAllforRemovaCorelocksonfurnitureapplications.OPERATION–InallRemovaCoreapplications,keyisremovableinbothlockedandunlocked positions.KEYING – All Cores are Master keyed to E13A. Will key together with all otherdisctumblerlocksusingD8783keyblank,exceptC8051andC8052.Seetableforavailablekeying.KAto20changes,includingallsixstandarddisctumblercodes.PACKAGING–Suppliedwithtwokeys.
Aspecialcontrolkeysimplyunlocksthecoreforeasyremovalfromthe front of the lock. The replacement core slips right in and you have it, security restored!
Replacement cores are readily available.
Now an entire furniture locking system can be changed in a matter of minutes, not days, through flexible key control.
Housing assemblies andplug cores are packaged and sold separately. See pages16and17.
SMALL DIAMETER FURNITURE LOCKS
LOCK CORE...
ONE PLUGFITS ALL!
C8834DrawerLock
D8840SideMountedGangLock
D8836“Mini”
GangLock C8830, C8832CamLocks
D8838FrontMountedGangLock
C8850
KA* KD Case Key Part No. Codes Codes Quantity Blank C8850-14A 20 200 25 D8783 C8850-3 20 200 25 D8783 C8850-19 20 200 25 D8783
*KeyCodesused:D003A,D054A,D071A,D084A,D091A, D177A,D233A,D256A,D284A,D313A, D346A,D362A,D390A,D413A,D415A, D420A,D435A,D512A,D554AandD642A.
IT’SEASY!
D8779ControlKey
© CompX National 2008
16
Lock Maximum Type of Cam Cylinder Material Case Part No. Description Installation Rotation Length Thickness Quantity
C8830 HousingAssembly Pedestal 90° 3/4” 3/4” 25
C8832 HousingAssembly Pedestal 180° 3/4” 3/4” 25
Lock Type of Bar/Bolt Cylinder Bar/Bolt Case Part No. Description Installation Operation Length Travel Quantity
D8834 HousingAssembly SingleDrawer Dead 3/4” 11/32” 25
D8836 HousingAssembly DeskPedestals DeadLocking 3/4” 11/32” 10 on two drawer applications
disc tumbler furniture locks
APPLICATION – Forwoodpedestals, door or drawer,R.H. or L.H.SurfaceMounted.For flipperdooruseC7015offsetcamandC2003strike. See pages 17 and 22.OPERATION–Choiceof90°or180°camrotation,CCWtolock.KEYING–Ordercoreplugseparately,C8850,seepg.15.PACKAGING–Housingassemblysuppliedwithtwomountingscrewsandstraightcam.Housingsareunplated.
APPLICATION – Two drawer “Mini Gang” lock for desk orpedestals, and single locking drawer for desk or pedestals. SurfaceMounted.OPERATION–KeyturnontheD8836movesthe6”barfromabove or below the plastic stops, which are mounted on drawer sides, thuspreventingdrawermovement.C8834hasa11/32”bolt throw.KEYING–Ordercoreplugseparately,C8850,seepage15.PACKAGING – Housing assemblies supplied with fourmountingscrewsandbolt.D8836comeswithtwoplasticstopsandmountingscrews.Housingsareunplated.
CAM LOCKS
SIDE MOUNTED TWO DRAWER“MINI” GANG LOCK
DRAWER LOCK
C8830 (90°)CamLockC8832 (180°)CamLock(shown)
Can also be used with pin cams.See page 17.
UseC8850Core
D8836 “Mini”GangLock
C8834DrawerLock
UseC8850Core
THESE LOCKS ALL FEATURE
MOUNTING HOLE
UseC8850Core
MOUNTING HOLE
MOUNTING HOLE
For more information, visit: compx.com
17
disc tumbler furniture locks
accessories
APPLICATION – For locking drawers in desk pedestals and othermultipledrawerapplications.Lockmountsinrightcorner.Canalsobemountedforleftcornerapplication.Surfacemounted.Requires21/32”dia.holeforcylinder,andwhenrequired,adadoforbar,measuring7/8”x3/16”deepininsideofpanel.OPERATION – Turning the key locks all drawers simultaneously(drawers must be in closed position). Bar moves studs from above or below the plastic stops, which are mounted on drawer sides, thus preventing drawer movement.KEYING–Ordercoreplugseparately,C8850,seepage15.PACKAGING–Housingassemblysuppliedwiththreesetscrewsfor1/2”projection,threeslides,saddle,threeplasticstops,andmountingscrews.If1”projectionisrequired,orderlockingstudsseparately.
APPLICATION – For locking drawers in desk pedestals and othermultiple drawer applications. Lockmounts on inside of unit. Surfacemounted.Requires21/32”dia.holeforcylinder.OPERATION – Turning the key locks all drawers simultaneously(drawers must be in closed position). Bar moves studs from above or below the plastic stops, which are mounted on drawer sides, thus preventing drawer movement.KEYING–Ordercoreplugseparately,C8850,seepage15.PACKAGING–Housingassemblysuppliedwiththreesetscrewsfor1/2”projection,threeslides,saddle,threeplasticstops,andmountingscrews.If1”projectionisrequired,orderlockingstudsseparately.
Additional 7/8” x3/16” dado for barrequired on inside of side panel.
Shownwith1”projection, not provided. See packaging below.
Shown with 1”projection,not provided. See packaging below.
GANG LOCKS WITH
BothLocksUse
C8850Core
D8838 FrontMountedGangLock D8840 SideMountedGangLock
C2018
Fits 17mmHole
C7020 C7021 C7022 C7015
Bag Part No. Description Dimensions Material Quantity
C2018-19 TrimRing 21/32”Dia. Plastic 25 C7015-2C 5/16”OffsetCam 1-1/16tohook Steel 25 C7020-2C PinCam 1” DieCast 25 C7021-2C PinCam 1-1/2” DieCast 25 C7022-2C PinCam 1-7/8” DieCast 25
Note: Order by number of pieces, not by bag. Full bags only. Orders must be in multiples of 25 pieces.
MOUNTINGHOLE MOUNTING
HOLE
Lock Type of Cylinder Bar Case
Part No. Description Installation Bar Operation Length Travel Quantity
D8838 HousingAssembly DeadLocking 3/4” 5/8” 5
D8840 HousingAssembly DeadLocking 3/4” 11/32” 5
DeskPedestal&Multi-Drawerapplications
© CompX National 2008
18
Non MK Bolt Cyl. Bolt KA* KD Case Key Part No. Type Length Throw Codes Changes Qty. BlankD8950-3 Dead 15/16” 11/32” 1 100 5 D8785
D8950-4G Dead 15/16” 11/32” 1 100 5 D8785
Non MK Bar Cyl. Bolt KA* KD Case Key Part No. Operation Length Throw Codes Changes Qty. BlankD8951-3 Reversible 15/16” 11/32” 1 100 5 D8785
D8951-4G Reversible 15/16” 11/32” 1 100 5 D8785
disc tumbler central locking systems
CENTER DRAWER LOCKING
APPLICATION–Forinstallinginwooddeskswithcenterdraweranduptosixsidedrawers,threeperpedestal.Drawerlockisinstalledincenterdrawer.OPERATION–Movementof thecenterdraweroperates thesystem.Whencenter drawer is closed, the closing motion is transferred to the pedestals via mounted ramps. Flags are pivoted into the path of side drawer mounted stops preventing opening of side drawers.KEYING–WillkeytogetherwithallotherdisctumblerlocksusingD8785keyblank.Seetableforavailablekeying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING – Supplied with two keys and all components shown andnecessary mounting screws. See installation sheet for complete parts listing.
PEDESTAL LOCKING
APPLICATION–Formultipledrawerlockingofwooddeskpedestalonlyormobile pedestal unit. Bar lock is installed in top drawer. For inside case width upto15-1/2”.OPERATION – Locking the top drawer rotates rod with attached flagswhich pivot into path of drawer mounted stops preventing opening of lower drawers.KEYING–WillkeytogetherwithallotherdisctumblerlocksusingD8785keyblank.Seetableforavailablekeying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING – Supplied with two keys and all components shown andnecessary mounting screws. See installation sheet for complete parts listing.
LATERAL FILE LOCKING
APPLICATION – Forwood constructed twodrawer lateral fileswith insidecasewidthupto42”.Doublethrowbarisinstalledintopdrawer.OPERATION–Lateralfilesrequire“anti-tilt”performanceofthehardwareforsafe operation. This permits only one drawer at a time to be opened. Opening adrawerresultsinasidemountedrailrotatingtheadjacentrod.Attachedflagswings into path of stop mounted on other drawer preventing its opening. Lockingthetopdrawerproducesthesame“lock-up”describedabove.KEYING–WillkeytogetherwithallotherdisctumblerlocksusingD8785keyblank.Seetableforavailablekeying.MasterkeyingtoE41AusingD8783keyblank.PACKAGING – Supplied with two keys and all components shown andnecessary mounting screws. See installation sheet for complete parts listing.
For convenience, we have gathered together in one package all components, fasteners and installation guidelines to provide security for three typical wood office furniture applications.
For simplification, only one pedestal application is shown.
HOW IT
WORKS
HOW IT WORKS
HOW IT
WORKS
*KeyCodesused:1Code–C415A.
Non MK Bar Cyl. Bolt KA* KD Case Key Part No. Operation Length Throw Codes Changes Qty. BlankD-8952-3 15/16” 11/32” 1 100 5 D8785
D8952-4G 15/16” 11/32” 1 100 5 D8785Doublethrow
For more information, visit: compx.com
19
APPLICATION–Lidlocksforcedarchestapplicationandother lid locking requirements. C8414 is surface mountedand requires a 9/16” dia. hole for cylinder.C8384 requires11/32” wide x depth of lock full mortise plus mortise forselvedge plus hole for key entry.OPERATION–Keyremovableinbothlockedandunlockedpositions.C8414hasasafetyfeaturerequiringoperationofpushbutton to lock or latch lid closed.KEYING–Eachlockfurnishedkeyedalike.PACKAGING–Suppliedwithonekey.Appropriatestrikesandmountingscrewssuppliedw/locksw/additionalkeyholeescutcheonfurnishedw/C8384.
APPLICATION – This group of locks is used primarilyon furniture and other fine cabinetry. C8826 is surfacemounted and requires hole for key entry, all other locks require full 11/32” x depth of lock. Additionalmortising,required for lock selvedge plus hole for key entry.OPERATION – Key removable in both locked andunlocked positions.KEYING–Eachlockfurnishedkeyedalike.PACKAGING –Suppliedwithonekey.All locksexceptC8826aresuppliedwithstrikes.KeyholeescutcheonsarepackedwithC8207andC8826.
Bolt Bolt Case Reference Key Part No. Installation Type Travel Quantity Number Blank
C8207-3 Dead 3/16” 25 N0-0274-001 D8890 C8252-3 Dead 3/16” 25 N0-0252-001 D8890 C8253-3 L.H.Door,FullMortise Dead 3/16” 25 N0-0252-002 D8890 C8826-3 Door/Drawer, Dead 21/64” 25 N0-0826-001 D8890 SurfaceMounted
R.H.Door,Drawer,FullMortise
Bolt Cylinder Bolt Case Reference Key Part No. Installations Type Length Travel Quantity Number Blank C8384-3 ChestLid, Hook — 5/16” 25 N0-0384-001 D8890 FullMortise .200”side shift C8414-4G ChestLid, Internal, 7/8” — 25 N0-8414-001 D8194 Surface Engages Mounted Strike
furniture locks
chest/lid locks
SCAdvantagelocksareavailableinfollowingoptions:k 11/8”&13/8”cylindersizesinbrightbrass(US3) ordullchrome(US26D)finishesk Keyingoptions:keyedalike,masterkeyed to schedule using Schlage C keywayk Zerobitted:6pinstandardk Available“LessCylinder”
Acceptsothermanufacturers’compatiblecylinders:k Schlageoriginalcylinders,includingPrimusk ASSAcylinder#65611k Medecocylinders wOriginal6pin#20-009S4&5pin#20-008S4 wBiaxial6pin#20W009S4&5pin#20W008S4 wKeymark6pin#20K009S4 wKeyretaining6pin#20W200S1
C8207
C8826
C8414(Replaces C8412)
C8384
C8252, C8253
FormoreinformationonSCAdvantageoperationorinstallation,visitcompx.com/scadvantage.html
Part No. Installation Bolt TypeCylinder Length
Bolt Travel
KA Codes
Master Keyed
Case Quantity
C9001-26D Drawer Dead 11/8” 1” 3Availablefor these products
10C9001-3 Drawer Dead 11/8” 1” 3 10C9003-26D Door Dead 11/8” 1” 3 10C9003-3 Door Dead 11/8” 1” 3 10C9001-26D Drawer Dead 11/8” 1” N/A N/A 10C9001-3 Drawer Dead 11/8” 1” N/A N/A 10C9003-26D Door Dead 11/8” 1” N/A N/A 10C9003-3 Door Dead 11/8” 1” N/A N/A 10Description:Largepinformatcabinetlockfordoor&drawerwith“Schlage”Ckeyway;alsoavailable“LessCylinder”Keyedalikecodes:101,102,and0bitted(non-bitted)Packaging:Suppliedwithtwokeys,2strikes,2spacersandmountingscrews;LC(“LessCylinder”)nokeysincluded
Recommended Mounting Hole Sizes
Drawer application
Door application
Part No. Installation Bolt TypeCylinder Length
Bolt Travel
KA Codes
Master Keyed
Case Quantity
C9009-26D Drawer Dead 13/8” 1” 3Availablefor these products
10C9009-3 Drawer Dead 13/8” 1” 3 10C9011-26D Door Dead 13/8” 1” 3 10C9011-3 Door Dead 13/8” 1” 3 10C9009-26D Drawer Dead 13/8” 1” N/A N/A 10C9009-3 Drawer Dead 13/8” 1” N/A N/A 10C9011-26D Door Dead 13/8” 1” N/A N/A 10C9011-3 Door Dead 13/8” 1” N/A N/A 10Description:Largepinformatcabinetlockfordoor&drawerwith“Schlage”Ckeyway;alsoavailable“LessCylinder”Keyedalikecodes:101,102,and0bitted(non-bitted)Packaging:Suppliedwithtwokeys,strikeandmountingscrews;LC(“LessCylinder”)locksdonotincludekeys
© CompX National 2008
20
Method of Attachment Case Reference Part No. Description to Spindle Quantity Number C8756-2C 3PointLatchPlate HexNutswithLock 25 M3-6931-001 withTongue,Used WashersThreaded withLockingBars onSpindle C8757-2C SinglePoint SideMounted 25 H2-0082-003 LatchTongue SetScrew
disc tumbler handle locks
APPLICATION –Fordoorsonmetal lockersandcabinets.ForR.H.doors,install with escutcheon vertical. For L.H. doors, install with escutcheonhorizontal. See above drawings. Choice of spindle lengths and mounting.Spindles accept both C8756 latch plate and C8757 tongue except C8747whichhas8-32tappedendholeandC8749whichwillacceptonlytheC8757tongue. Spindles can be cut to fit special requirements.OPERATION–Keyremovableinbothlockedandunlockedpositions.KEYING–WillkeytogetherwithallotherdisctumblerlocksusingD8785keyblank. See table for available keying. PACKAGING – Supplied with two keys (except C8755) and mountinghardware.
C8751 C8754 C8755
C8749 C8747
C8758 C8759
LATCH PLATE & TONGUE FOR ABOVE HANDLE LOCKS
C8756
C8757
MOUNTINGHOLES MOUNTING HOLES
*KeyCodesused:1Code–C415A. 3Codes–C413A,C415AandC420A.**5/16”sq.spindlew/8-32tappedendhole.
†5/16”sq.spindle††Non-LockingHandle.
Key Non MK
Type of Spindle Direction of KA* Changes Case Reference Key Part No. Mounting Length Turn to Open Codes KD Qty Number Blank C8747-26D Rear 1”** 90°c/cw 1 200 10 M4-0428-420 D8785
C8749-26D Rear 4”† 90°c/cw 1 200 10 M4-0428-293 D8785
C8751-26D Rear 1” 90°c/cw 3 200 10 M4-0428-620 D8785
C8754-26D Rear 3” 90°c/cw 3 200 10 M4-0428-684 D8785
C8755-26D†† Rear 3” 90°c/cw — — 10 M6-0429-684 —
C8758-26D 1” 90°c/cw 3 200 10 M4-0294-620 D8785
C8759-26D 3” 90°c/cw 3 200 10 M4-0294-684 D8785
Thru-theEscutcheon
For more information, visit: compx.com
21
Bolt Case Key Part No. Installation Type Quantity Blank C8764-26 CurrentC8765Handles — 25 D8780 C8763-26 N.L.59-1105Handles — 25 D8780 C8762-26 EarlyModels,N.L.59-1105 — 25 D8780 Handles
disc tumbler circuit breaker cabinet locks
garage door mechanism-locking handle
cooler locking handle replacement plugs
APPLICATION–Forrighthandedmetaldoorsofelectricalcircuitbreakercabinets.OPERATION –Key removable in both locked andunlockedpositions.Pushplateoperatesspringbolt.Unlocked,pushplateactsasspringlatch.KEYING–SuppliedkeyedalikeonlytoB135A.PACKAGING–Suppliedwithtwokeys;nomountinghardware.
APPLICATION – For mounting on sectional overhead doors. Factory assembled for R.H. mounting.Mechanisminstallsatrightsideofdoor(insidegarage)to lock into track.Handle can replaceOverheadDoorlocking handles.Mechanism can be reversed for L.H.application.OPERATION – Turning key releases mechanism,unlockingdoor.Handleturnsdowntoverticalposition.
Turnhandletohorizontaltolockdoor.Keyremovableinboth locked and unlocked positions.KEYING – Available keyed differently only (10changes).PACKAGING–C8797furnishedwithmountingscrews.C8798 supplied with two keys and mounting screws.
APPLICATION–C8762andC8763replacementplugsareforearliermodelsofC8765lockinghandles(NationalLock59-1105seriesofhandles).OPERATION–Keyremovableinbothlockedandunlockedpositions.KEYING–KeyedaliketoXC-3.PACKAGING–C8762andC8763plugssuppliedwithtwokeysandspecificretainer.C8764plugsuppliedwithtwokeys,retainer/stopandscrew.
C8070MOUNTINGHOLE
C8797
C8798
C8764 C8762 C8763
Type of Bolt Bolt Case Reference Key Part No. Mounting Type Travel Quantity Number Blank
C8070-2C* R.H.Door Spring 7/32” 10 M4-0226-001 D8786 Pivot*AluminumEnamelFinish.
MOUNTING HOLESFOR HANDLE
Key Changes Case Reference Key Part No. Installation Operation KD Quantity Number Blank C8797-2C Insidedoor Slidingboltlocks — 5 M6-0492-001 — near track into track
C8798-26 Outsidedoor Keyreleasesbolt, 10 5 M4-0498-001 D8785 overmechanism Handlelocksbolt
© CompX National 2008
22
Bolt Cylinder Bolt Case Reference Key Part No. Installation Type Length Travel Quantity Number Blank C8422-3 Door Dead 7/8” 7/32” 25 N0-2422-097 —
lever tumbler door lock
strikes, escutcheon, flat washer
APPLICATION–Surfacemountedlock,holerequiredforcylinders.C8422usedon doors with with narrow stiles such as display cases with wood framing. OPERATION–Keyremovableinbothlockedandunlockedpositions.KEYING–Eachlockfurnishedkeyedalike.PACKAGING–Suppliedwithmountingscrewsandtwokeys.
Our most popular strikes are offered in two finishes. They are furnished with screws finished to match the strike.
Accessthelockbycombinationorwithatwistofthekey.
w Replaces any standard cam lock to get instant keyless access
w 10,000 possible code combinations
w Retrofitsintoexisting3/4”woodormetalmountingholes-noneedfordrilling or modification
w Small profile fits most doors & drawers
w Combinations secure - code can only be changed with the proper key and correct combination
w Heavydutydiecastconstruction
w 100%mechanical–nobatteriesneeded
ToseevideosofDualAxess® in use, please visit http://compx.com/dualaxess.html
Ornamental escutcheon for furniture. Supplied with mounting pins..
Flat washer used to convert 3/4”dia.holesinsteelfrontstoadouble“D”hole for installingcam locks. Spot weld to backside of hole.
7/8” dia. trim ring to be usedto cover ragged edges around bored mounting holes.
Mounting plate for cylindercam locks, screw mounted. Used where spur washer willnot embed into hard surface. Packed25pcs.perbag.
C2001
C2003
C2005
C2002
C2004
C2006
C2007
C2008 C2015
C2017
C2016 Note: Order by number of pieces, not by bag. Full bags only. Orders must be in multiples of 25 or 50 pieces.
MOUNTINGHOLE
Recommended Mounting Hole Sizes
Recommended Hole Location for Door or Drawer Applications
Flush door application Flush drawer application
C8422
– keyless combination cam lock
Part No.Cylinder Length
MaximumMaterial
ThicknessMKKACodes*
MKKD Codes
CaseQty.
KeyBlank
Plug Removal
KeyMaster
KeyD8030 7/8” 5/8” 3 60 10 D8770 D8771 D8772D8031 13/8” 11/8” 3 60 10 D8770 D8771 D8872*KeyCodes:DA108,DA120,DA124
Overall Qty Per Part No. Description Dimensions BagC2001-14A 25
C2001-3 25
C2002-14A 25
C2002-3 25
C2003-14A 25
C2003-3 25
C2004-14A 25
C2004-3 25
C2005-14A 25
C2005-3 25
C2006-14A 25
C2006-3 25
C2007-14A 25
C2007-3 25
C2008-3 Keyholeescutcheon 1”Dia. 50
C2015-2C Flatwasherforcamlocks 1-1/8”Dia. 25
Mountingplateforcamlocks 2-3/16”x1-1/4” 25C2016-2C Screwmounted,useNo.8 screws, not furnished.C2017-14A 25
C2017-26D 25
C2017-3 25
C2017-4 25
C2017-4G 25
Formed strike, no bolt hole
Formed strike, no bolt holecountersunk holes reversed
Flat strike with rounded ends,3/4”x7/32”bolthole
Flat strike with square ends,7/8”x17/64”bolthole
Flat strike, no bolt hole
Flatstrikewithsq.endsand15/16”x1/4”tongue,15/16”x1/4”hole
Flat strike with rounded ends,1-1/16”x17/64”bolthole
Trim ring for alllockswitha7/8”mounting hole.
1-3/4”x1/2”with3/16”form
1-3/4”x1/2”with3/16”form
1-15/16”x3/8”
2-5/32”x1/2”
1-15/16”x3/8”
2”x3/4”
2-5/32”x1/2”
7/8”Dia.
For more information, visit: compx.com
23
disc tumbler cams
pin tumbler cams
.284" mounting hole for all disc tumbler cams
Selection of cams that permit adaption of disc tumbler cylinder cam locks to meet nearly every application need.
Straight Hook Cams and DoubleFormed Cams can be reversed when required.
Cams for pin tumbler cylinder cam locks.All camshavedualfunction. See “Applications”column in table for details.
C7001 C7002 C7003 C7004 C7005 C7006 C7007 C7008 C7010 C7012 C7011 C7013 C7009 C7014
STRAIGHT CAMS STRAIGHT HOOK CAMS SINGLE FORMED CAMS DOUBLE FORMED CAMS
DOUBLE FORMED CAMS
STRAIGHT CAMS
C7110 C7111C7112 C7115 C7114 C7116 C7113
C7101
C7104 C7103 C7102 C7105
Qty Per Qty Per Part No. Description Length Bag Part No. Description Length Offset Bag C7001-2C StraightCam 3/4” 25 C7008-2C StraightHookCam 1-1/2” — 25
C7002-2C StraightCam 1” 25 C7009-2C DoubleFormedCam 1-3/4” 1/2” 25
C7003-2C StraightCam 1-1/8” 25 C7010-2C SingleFormedCam 5/8” 7/32” 25
C7004-2C StraightCam 2” 25 C7011-2C SingleFormedCam 1-1/8” 7/16” 25
C7005-2C StraightCam 3’ 25 C7012-2C SingleFormedCam 1” 7/16” 25
C7006-2C StraightHookCam 1” 25 C7013-2C DoubleFormedCam 1-1/8” 3/8” 25
C7007-2C StraightHookCam 1-1/8” 25 C7014-2C DoubleFormedCam* 1-5/8” 5/16” 25
*Foroverlayconstructionusing3/4”thickfrontand3/4”thickframematerial.UsewithC8053disctumblerlock.
*Foroverlayconstructionusing3/4”thickfrontand3/4”thickframematerial.UsewithC8102pintumblerlocks.
Note: Order by number of pieces, not by bag. Full
bags only. Orders must be in multiples of 25 or 20 pieces.
Position Applications of shifter Solid lines show locked on back Qty Per position of cam of lock Part No. Description Length Offset Bag C7101-2C StraightCam 1-1/4” — 20
C7104-2C StraightCam 3” — 20
C7110-2C DoubleFormedCam 1-1/4” 9/32” 20
C7115-2C DoubleFormedCam* 1-5/8” 7/16” 20
C7102-2C StraightCam 1-1/4” — 20
C7103-2C StraightCam 1-1/8” — 20
C7105-2C StraightCam 3” — 20
C7111-2C DoubleFormedCam 1-1/4” 9/32” 20
C7112-2C DoubleFormedCam 1-1/8” 1/4” 20
C7114-2C DoubleFormedCam* 1-5/8” 7/16” 20
C7113-2C DoubleFormedCam* 1-5/8” 7/16” 20
C7116-2C DoubleFormedCam* 1-5/8” 7/16” 20
© CompX National 2008
24
Carton Reference Part No. Description Material Quantity Number
D4290 3PinTumbler Brass 50 M3-0679-111 D4291 4PinTumbler Brass 50 M3-0558-111 D4292 5PinTumbler Brass 50 M3-0676-111 D4293 5PinTumbler Brass 50 M3-0676-211 D4295 5PinTumbler Brass 50 M3-0600-111 D4296 4PinTumbler(short) Brass 50 M3-5655-111 D4297 4PinTumbler(long) Brass 50 M3-5450-212
original pin tumbler key blanks
original disc tumbler key blanks
IDENTIFYINGKEY BLANKS
Blanks are listed with related actual sizecrosssection.
Sight down the end of the blank to identify the cross section or profile.
PIN TUMBLER BLANKS 4 PIN TUMBLER BLANKS 5 PIN TUMBLER BLANK
4 DISC TUMBLER BLANKS 5 DISC TUMBLER BLANKS 6 DISC TUMBLER BLANKS
5 or 6 DISC TUMBLERREVERSIBLE KEY BLANKS
Carton Reference Part No. Description Material Quantity Number D8776 5DiscTumblerPassKey Brass 50 P5-6613-301 D8777 5or6DiscTumblerPassKey Brass 50 M5-0650-111 D8778 5or6DiscTumblerPassKey Brass 50 M5-0650-906 D8780 4DiscTumblerPassKey Brass 50 M5-0682-111 D8781 4DiscTumblerMasterKey Brass 50 M5-0682-112 D8782 4DiscTumblerPassKey Brass 50 M5-0688-111 D8790 4DiscTumblerPassKey Brass 50 M5-0693-111 D8783 5DiscTumblerPassKey Brass 50 M5-0680-111 D8784 5DiscTumblerMasterKey Brass 50 M5-0680-112 D8785 5DiscTumblerPassKey Brass 50 M5-0687-111 D8786 5DiscTumblerPassKey Brass 50 M5-0691-111 D8787 6DiscTumblerPassKey Brass 50 M5-0694-117 D8788 6DiscTumblerMasterKey Brass 50 M5-0694-119 D8789 6DiscTumblerPassKey Brass 50 M5-0694-115 D8791 5DiscTumblerPassKey Brass 50 M5-0692-111 D8792 5DiscTumblerPassKey Brass 50 M5-0695-114 D8793 5DiscTumblerPassKey Brass 50 M5-0695-112 D8794 5DiscTumblerMasterKey Brass 50 M5-0695-113 D8795 6DiscTumblerPassKey Brass 50 M5-0694-113 D8796 6DiscTumblerPassKey Brass 50 M5-0694-112 D8798 6DiscTumblerMasterKey Brass 50 M5-0694-114
AllDiscTumblerKeyBlanks,D8780throughD8798,arestampedwithlasttwodigitsofpartnumbertoaidinidentification.Example:D8788isstamped“88”.
3 Pin Tumbler D42904 Pin Tumbler D42915 Pin Tumbler D42925 Pin Tumbler D4293
D4296
D4297
D4295
D8780D8781D8782D8790
DECR
D8783D8784D8785D8786D8791D8792D8793D8794
DECBRNMK
D8787D8788D8789D8795D8796D8798
DECNMK
D8777 D8778
D8776
For more information, visit: compx.com
25
Carton Reference Part No. Description Material Quantity Number D8194 LeverTumbler(cut)–Flat Steel 50 N1-8414-105 D8192 LeverTumblerBlank–Flat Steel 50 N1-0651-101 D8193 LeverTumblerBlank–Flat Steel 50 N1-0656-113 D8491 LeverTumblerBlank–Paracentric Brass 50 N1-0640-119
Reference Part No. Description Material Number D4299 PinTumblerGM1Masterkey Brass M3-0686-399 D8419 LeverTumbler5LMFlatMasterkey Steel N1-0651-399 D8799 DiscTumblerE41AMasterkey Brass M5-0680-399 D8999 DiscTumblerE13AMasterkey Brass M5-0680-399
Carton Reference Part No. Description Material Quantity Number D8590 FreezerLockKeyWrench DieCast 50 N5-0811-001 –CrossShape D8591 FreezerLockKeyWrench DieCast 50 N5-0812-001 –PentagonShape D8890 WardedBarrelKey DieCast 50 M5-0689-102
original lever tumbler key blanks
original master keys
keys
D8001 Pin Tumbler Key Codes — Includes the mostpopularNationalkeycodes:GM1series,GM2series, GM2A series, GM300 series, GM600 seriesandGM700series.
D8002 Disc Tumbler and Lever Tumbler Key Codes — Includes the most popular National key codes:standard4tumblerseries,standard5tumblerseries,standard6tumblerseries,5tumblerprefixRDseries,5tumblerprefixGFseries,5tumblerprefixSKandKSseries,6tumblerprefixSKandKSseriesand5levertumblerseries8LLT.
D8890
D8002
D8001
FLAT LEVER TUMBLER BLANKS PARACENTRIC LEVER TUMBLER BLANKS
FREEZER LOCK KEYS WARDED BARREL KEY
key code books
D8194(Replaces D8191)
D8192D8193
D8491
D4299 D8419 D8799D8999
E
D8590
D8591
© CompX National 2008
26
Identifying Qty Per Qty Per Part No. Description Color Bag Part No. Description Bag C3730 #1Driver Blue 250
C3731 #2Driver SlateGray 250
C3732 #3Driver Copper 250
C3733 #4Driver Violet 250
C3734 PlugRetainer — 100
C3735 PlugRetainer — 100
C3736 TumblerRetainer — 100
C3737 TumblerSpring — 500
C3738 PlugRetainer — 100 C6782 #00Tumbler 250
C3740 #2MasterDriver Violet 250 C6783 #22Tumbler 250
C3741 #3MasterDriver Red 250 C6784 #44Tumbler 250
C3742 #4MasterDriver Blue 250 C6785 #66Tumbler 250
C3743 #5MasterDriver Fuchsia 250 C6786 #02Tumbler 250
C3744 #6MasterDriver SlateGray 250 C6787 #04Tumbler 250
C3745 #7MasterDriver Brass 250 C6788 #06Tumbler 250
C3746 #8MasterDriver Copper 250 C6789 #20Tumbler 250
C3747 #9MasterDriver Brown 250 C6790 #24Tumbler 250
C3750 #0Tumbler Silver 250 C6791 #26Tumbler 250
C3751 #1Tumbler Black 250 C6792 #40Tumbler 250
C3752 #2Tumbler Violet 250 C6793 #42Tumbler 250
C3753 #3Tumbler Red 250 C6794 #46Tumbler 250
C3754 #4Tumbler Blue 250 C6795 #60Tumbler 250
C3755 #5Tumbler Fuchsia 250 C6796 #62Tumbler 250
C3756 #6Tumbler SlateGray 250 C6797 #64Tumbler 250
C3757 #7Tumbler Brass 250 C6798 TumblerSpring 500
C3758 #8Tumbler Copper 250
C3759 #9Tumbler Brown 250
keying kits
keying kit replacement parts
V71D-4
C3740-C3747
C3734
C3735 C3736 C3737 C3738C6782-C6797
C6798
PIN TUMBLER KEYING KIT
REPLACEMENT PARTS
D6676D6686
DISC TUMBLER KEYING KIT REPLACEMENT PARTS
V70P-1 Pin Tumbler Keying Kit –Includes: 100Pcs.ea.1,2,3and4Drivers. 100Pcs.ea.0,1,2,3,4,5,6,7,8and9Tumblers. 250Pcs.TumblerSprings 100Pcs.TumblerRetainers 50Pcs.ea.C3735andC3738PlugRetainers.
V70P-2 Pin Tumbler Master Keying Kit –Includes: 100Pcs.ea.2,3,4,5,6,7,8and9MasterDrivers.
V71D-3 Disc Tumbler Keying Kit –Includes: 100Pcs.ea.00,22,44and66Tumblers. 250Pcs.TumblerSprings.
V71D-4 Disc Tumbler Master Keying Kit –Includes: 100Pcs.ea.02,04,06,20,24,26,40,42,46,60,62and64Tumblers. 250Pcs.TumblerSprings.
C3730-C3733
C3750-C3759
D6676
D6680
D6682
D6686
5PinTumblerDepthKeys–Setof10Keys
5DiscTumblerDepthKeys–Setof4Keys
4DiscTumblerDepthKeys–Setof4Keys
4PinTumblerDepthKeys–Setof10Keys
1 Set
1 Set
1 Set
1 Set
V70P-1 V70P-2 V71D-3
D6680D6682
For more information, visit: compx.com
27
sample boards
V69B-1 Board
V69B-1 Board displays C8101, C8102,C8103, C8106, C8108, C8109 and C8183(C8188),with“TheAdvantagePlus”feature.
Help your customers select the right lock.Sample boards are invaluable aids to complete a sale. CompX National display boards make your business the center for qualitylocks.Boardsareorganizedbytypeoflocks and can be hung or fastened in place. Available individually or in sets. All boardsfinished with descriptive information.
V69B-2 Board
V69B-2 Board displays pin tumbler door anddrawerlockswith“TheAdvantagePlus”feature,C8163,C8173andC8178.Alsoshown,C8131,C8133 and C8139; along with furnished strikes.
V69B-3 Board
V69B-3Boarddisplayspintumblermailboxlocks,C8710thruC8726.17lockstotal.
V69B-4 Board
V69B-4 Board displays the popular C8730and C8735 mail box locks; each having a selection of five cams to meet specific mounting requirements.
V69B-5 Board
V69B-5BoarddisplaysC8043,C8140andC8142slidingdoorlocks.AlsoincludesC8402lockerlock,C8154 knob lock, C8150 file cabinet lock, C8070panellock,andC8065screwdriverCamLatch.
V69B-6 Board
V69B-6 Board displays disc tumbler camlocks C8051 thru C8055, with reference to C8073 and C8075 flexafunction locks. C8060andC8080withflexafunction feature. AlsoshownisC8062.
V69B-7 Board
V69B-7Board displaysC8747,C8751 andC8759 representing a selection of handle locks.AlsodisplayedareC8756andC8757latch plate and tongue.
V69B-8 Board
V69B-8 Board displays all the availablecams for both disc tumbler and pin tumbler cylinder cam locks. Also displayed areexamples of available strikes, flat washer and barrel key escutcheon.
V69B-10 Board
V69B-10BoarddisplaysC8384andC8414lid locks. Other locks displayed include C8207, C8252, C8826, and C8422, alongwith furnished strikes and escutcheons.
V69B-13 Board
V69B-13BoarddisplayssamplesofC8703thruC8706locks;C8803andC8804,D8090gang lock and C8701 lock with reference to C8137 pin tumbler lock.
CAM LOCKSPin Tumbler
DOOR & DRAWER LOCKSPin Tumbler
MAIL BOX LOCKSPin Tumbler
MAIL BOX LOCKSMulti-Cam-Pin Tumbler
SLIDING DOOR LOCKS-SPECIAL USE LOCKS
CAM LOCKSDisc Tumbler
HANDLE LOCKSDisc Tumbler
CAM ASSORTMENTPin Tumbler - Disc Tumbler
STRIKES
FURNITURE LOCKS DRAWER & DOOR LOCKSDisc Tumbler
V69B-12 Board
V69B-12 Board displays disc tumblerRemovaCore locks D8840, D8836, D8838,C8834,C8830andC8850plugcore.
FURNITURE LOCKSSmall Diameter Disc Tumbler
28th Edition
MAINOFFICE-FACTORYP.O.Box200
Mauldin,SC29662PH:864-297-6655FAX:864-297-9987
compx.com
WESTERNDISTRIBUTIONCENTER9370BuffaloAvenue,Unit104RanchoCucamonga,CA91730
PH:909-476-7933FAX:909-476-8553
Reorder#:F2644-001July2008PrintedinU.S.A.
COMPXNATIONALREGISTEREDTOISO9001CERTIFICATENO.A2695
SINCE1903
CRAFTING
LOCKS
IN
AMERICA
Copyright 2008 © CompX Security Products