BIRLA INSTITUTE OF TECHNOLOGY AND SCIENCE, PILANI INSTRUCTION DIVISION II SEMESTER 2009-2010

Course Handout Part II

Date: 06-01-2011In addition to part -I (General Handout for all courses appended to the time-table) this portion gives further specific details regarding the course.

Course No. : MEL G632Course Title : Analog IC Design (5 unit)Instructor-in-charge : Prof. M. B. Srinivas

Wg Cdr V Sanjay (M.Tech Working Professional)

1. Scope and Objective of the Course:Despite the emergence of powerful simulation tools, there can be no substitute for a thorough understanding of the behavior of analog circuits and systems. This course aims at teaching the basic concepts in Analog IC design; different Design techniques for analog and mixed-signal VLSI circuits like operational amplifiers, trans-conductance amplifiers, finite-gain amplifiers, current amplifiers, and switched capacitance circuits. In-depth understanding of linear building block like differential amplifiers, current mirrors, references, cascoding and buffering. Performance characterization of linear integrated circuits in terms of offset, noise, sensitivity and stability will be discussed. Layout considerations, simulation, yield and modeling for high-performance linear integrated circuits using EDA tools: Cadence, Synopsys, VHDL-AMS are also included. 2. Text Book:

Design of Analog CMOS Integrated CircuitsAuthor: Behzad RazaviPublisher: TATA McGRAW Hill 2001

3. Reference Books:

R 1. Analysis and Design of Analog Integrated CircuitsAuthor : Paul R. Gray & Robert G. MeyerPublishers : Wiley (International edition)

R 2. Analog Integrated Circuit DesignAuthor : David Johns & Ken MartinPublishers : John Wiley & Sons 1997.

R 3. Analog VLSI Design – NMOS and CMOSAuthor : Malcom R. Haskard & Ian C. May

R 4. Analog VLSI: signal and Information ProcessingAuthor : Mohammed Ismail, Terri FiezPublishers : McGRAW-HILL International Edition, 1994.

R5 CMOS Analog Circuit DesignAuthor : Phillip E. Allen & Dogulas R. HolbergPublishers : Harcourt Bruce Jovanovich College Publishers, 1987

R6. Design of analog Integrated Circuits and SystemsAuthor : K. R. Laker & Willy M. C. SansenPublishers : McGRAW-HILL International Edition, 1994.

R7. IEEE Journal of Solid St. Circuits and other Journals.

R8 Analog MOS Integrated Circuits for Signal Processing Author : R . Gregorian & G .C Temes Publishers : Wiley (International edition, 1986)

R9. CMOS MIXED SIGNAL CIRCUIT DESIGN Author : R . Jacob Baker Publishers : IEEE Press (Wiley Inter-science 2002)

4. Course Plan:

S. No. Topic No. of Lectures Reference to text book/ref book

01. Introduction, MOS models for Analog Circuits MOS switch, Noise, Capacitors, Resistors

2 Chap-1/ R5

02. Single Stage Amplifiers, frequency response of amplifiers

3 Chap-3/ R5

03. Source Coupled Amplifiers 2 Chap-4/ R504. Advanced Current Biasing Circuits 6 Chap-5, 11/ R505 Noise 4 Chap. 706. Operational Amplifiers, Offset voltage,

Uncompensated Compensated op-amp, Op-amp, frequency response

8 Chap-9, 10/ R5

07. Comparators and Latch 4 R508. Switched Capacitor circuits 5 Chap-12/ R509. Analog Technology and Layouts 3 Chap-13, 1810. Case studies-Low Power Circuits, analog

testing CAD, A/D and D/A converters(overview), PLL (overview) , Gm-C filters (overview)

5 R5, and other references , IEEE papers

42

5. Evaluation Scheme :

Component Duration Weightage Date, & Time Venue Remarks

Test-I 50 min 20 09/02 11-11.50 AM CBTest-II 50 min 20 13/04 11-11.50 AM OBAnalog design project + lab-assignments, lab test

continuous 15+15 Spread through the semester

-

Comprehensive 3 hrs. 30 01/05 AN CB and OB100

6. Laboratory: Regular 3 hrs lab every week. Lab timings will be announced in the class7. Chamber Consultation Hour: To be announced in the class.8. Make-up: Make-up will be given only on genuine reasons. Prior permission is necessary.9. Notice: Notice will be displayed on EEE Notice Board ONLY

Instructor-in-charge MEL G632