Upload
nav4evr
View
235
Download
0
Embed Size (px)
DESCRIPTION
hW 8
Citation preview
MEE 342 Dr. Masoud Yekani Fard HW 8, Due 04/29/2015 1.(75points)Figure1showsabarwelded toabasewith3/16infilletweldson threesidesusingan E70electrode.MaterialisA572Grade50hot-rolledsteel(Sy=50ksi,Sut=65ksi).Whatisthe maximum static load P that can safely be applied? Figure 1. 2.(75 points) Figure 2 shows a bracket welded to a wall with a fillet weld using an E70 electrode. Determine the fillet weld size needed between the tube and wall for a static load F = 2.5 kips. The material properties of pipe and wall are Sy = 60 ksi, Sut = 80 ksi. OD = 3.5 in, ID = 3.068in, b = 0.5 in, h = 4.2 in, a = 7in, l = 8.75 in. Figure 2.