Mechanism presencial vote a) Board Box president secretary first teller second teller Three general...
If you can't read please download the document
Mechanism presencial vote a) Board Box president secretary first teller second teller Three general substitutes b) Election Observers c) Representatives
Mechanism presencial vote a) Board Box president secretary
first teller second teller Three general substitutes b) Election
Observers c) Representatives of political parties and independent
candidates
Slide 4
Mechanism presencial vote Installing box
Slide 5
Mechanism presencial vote Opening the election day 07:30 hs
18:00 hs 08:00 hs
Slide 6
Mechanism presencial vote Reception of citizens to vote
Slide 7
Mechanism presencial vote Location of citizen Marking nominal
list
Slide 8
Mechanism presencial vote Suffrage vote
Slide 9
Mechanism presencial vote They deposit the ballots in the
ballot box
Slide 10
Mechanism presencial vote Marked badge Placing indelible ink
and return of the citizen voter
Slide 11
Monitoring Election Day : SIJE The data will be received and
captured at the headquarters of the district boards executive of
the Institute, and transmitted through the redine for consultation,
in real time, by the General, local and district Councils INE and
the corresponding OPL.
Slide 12
Features ballot Measures 22 x 28. Type of choice. Removable
numbered stub. Emblems of political parties. Signatures Director
Chairman and Executive Secretary. Printed on security paper
90g.
Slide 13
Ballot and security measures Latent image (front ) Water seal
with the national emblem (front ) 22 x 28 cm Visible and hidden
optical fibers Printing inverted microprint Using invisible ink INE
E N T I D A D
Slide 14
Polling and counting Mechanism presencial vote
Slide 15
A vote for independent candidate A vote for the candidate NOT
registered A vote for only one candidate A vote for a coalition
Valid votes for political parties
Slide 16
Mechanism presencial vote Invalid ballots for political parties
In overturning the ballot Mark two candidate does not
coaligados
The night of the election day results seated in each tally and
count box will be captured in the System Registry Records
Slide 23
Absentee voting mechanism Citizens residing abroad may exercise
their right to vote for: President of the United States of Mexico
Senators Governors of the states Head of Government of the Federal
District, In so far as determined by the Constitutions of the
States or the Statute of the Federal District. Art. 329 LGIPE Vote
of Mexicans Abroad
Slide 24
Slide 25
Absentee voting mechanism. Postal vote Delivery ballot in
person at consulates or embassies Art. 329 LGIPE In the terms
determined by the Institute
Slide 26
Absentee voting mechanism. E-voting According to the guidelines
issued by the Institute, they should ensure that complete certainty
and proven security. Art. 329 LGIPE
Slide 27
Slide 28
Voting mechanism abroad Filling the Application for entry to
the Nominal List of Voters Abroad.
Slide 29
Voting mechanism abroad Shipping and forwarding Electoral
Postal Package citizen
Slide 30
Voting mechanism abroad Is the reception, registration,
classification and receipt of envelopes with ballot.
Slide 31
Voting mechanism abroad On the day of open tables that receive
voting envelopes to perform the calculation.
Slide 32
Voting mechanism abroad Is completed and supplied to each state
the minutes and counting.
Slide 33
Slide 34
Electronic voting mechanism Location of the citizen in the list
nominal Marking nominal list " VOTED "
Slide 35
Access to electronic voting Enabling Electronic Ballot
Electronic voting mechanism
Slide 36
Citizen's vote is received Electronic voting mechanism
Slide 37
Marked badge Placing indelible ink and return of the citizen
voter Electronic voting mechanism
Slide 38
At the end of the vote should raise the switch to close vote.
At the close of voting ballot Viewer will open by pulling the
lever.
Slide 39
The activation button was pressed to obtain the record of
results. Electronic voting mechanism
Slide 40
The final results sheet shall be printed immediately. E-voting
mechanisms
Slide 41
Slide 42
Slide 43
Portable Booth The booth package is integrated by: A suitcase
form table, 3 booths sheets (2 siders and 1 centerfold), 4 bumpers,
2 tubes for curtains, 4 taps for curtains, 4 aluminum posters, 2
aluminum tightens, 1frame and 1 description letter to facilitate
the ensemble. The total weight for the suitcase is 6 kilograms. The
suitcase contains all up mentioned materials and has a dimension of
70 cm large, 35 cm wide and 8 cm deeper. Once ensemble the
dimensions are 120 cm large, 70 cm wide and 170 cm height.
Slide 44
Manufactured in: The dimensions are 38 cm long by 38 cm wide by
38 cm high with a capacity to hold 750 ballots. The weight of empty
urn is 870 g ( Support up to 4 kg ). In The top cover has a label
with braille recorded to support people with visual disabilities.
In the top cover slot for which the ballot is introduced is
located, the dimensions of this is 12 cm long and 3 mm wide,
sufficient to introduce a ballot folded into quarters space. Ballot
box
Slide 45
Manufactured in: The dimensions are 47 cm long and 25 cm wide
by 30 cm ato, sufficient to contain documentation of a square inner
space. The weight of the empty box is 901 g ( Supports
documentation 3 choices, Case Stand up to 16.5 kg). On the outside
has three compartments : One to hold the indelible ink marker
credentials and located in one of the side covers. Two more on the
faces of greater area to protect the envelopes containing copies of
the minutes to the preliminary results. For transportation includes
a plastic handle and adjustable straps Box electoral package
Slide 46
Manufactured in: CredencialesLmina marker punched steel, bent
and formed, with engravings obtained in the die. The dimensions are
290 cm long by 2.4 cm wide by 9.1 cm high Its approximate weight of
237g. The clamp has at one end an aluminum element hosting the
given type marker interchangeable, which is steel and having at its
free end corresponding to the election year and at the opposite end
the anvil is located at close and press the mark applied uniformly
on credentials. 15 Marker credentials
Slide 47
Manufactured in: Its dimensions are 1 cm diameter by 18 cm long
with outer surface finish magenta enamel paint. The weight of each
pen is 9 g Ten parts box as presented is 92 g. For identification
features embossed in white identity of the Institute. Marker
ballot
Slide 48
Formula developed by: The National School of Biological
Sciences, National Polytechnic Institute. It is resistant to
commonly used solvents and retention in the skin is 10 hours. Color
is immediately observable and the drying time is 15 seconds.
Indelible ink
Slide 49
Manufactured in: Opaque white plastic polypropylene to ensure
mechanical resistance to tensile and impact properties. The weight
of the particular screen is 668 g. The dimensions are 54 cm long by
35 cm wide by 49 cm ato, enough to provide voter secrecy when
marking your ballot space. Presented to bend the pipe character
slots and the walls and get a symmetrical assembly It features a
reinforced instructive. Special Screens
Slide 50
Election materials Production Dates 1 January 26 to April 18,
2015 Distribution Dates 2 April 11 to April 25, 2015