ME SEP Module Mapping Reference-Sem 1& 2me.nus.edu.sg/.../2017/02/ME-SEP-Module-Mapping-Reference-Sem-1-2.pdfME SEP Module Mapping Reference for Summer ... 14/15 SEM 2 MATS4004 FRACTURE

ME SEP Module Mapping Reference (Approved Modules)

ME SEP Module Mapping Reference for SummerBelow module mappings have been approved, students may use this list for reference.*Modules in red will have to make up for the shortfall of contact hours*Students going for exchange from AY2017/18 onwards need not look at contact hours, to look at credits/ECTS instead. For more info, go to ME SEP website.

Country Partner University AY & Sem Credit TypeCode MC Remarks

14/15 SEM 2 ENGN3810 BIOMECHANICS AND BIOMATERIALS ME4253 BIOMATERIALS ENGINEERING 12 414/15 SEM 2 ENGN 3212 MANUFACTURING TECHNOLOGIES ME3162 MANUFACTURING PROCESSES 11 4

17/18 SEM 2 ENGR90024 COMPUTATIONAL FLUID DYNAMICS 12.5 ME4233 COMP MTDS IN FLUID MECHANICS 12 416/17 SEM 2 MCEN90015 THERMODYNAMICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MCEN90012 DESIGN FOR MANUFACTURE ME3162 MANUFACTURING PROCESSES

ELEN90046 MAJOR DESIGN PROJECTMCEN90036 CAPSTONE PROJECT A

16/17 SEM 2 MCEN30020 SYSTEMS MODELLING AND ANALYSIS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MCEN90028 ROBOTICS AND AUTOMATION SYSTEMS ME4245 ROBOT MECHANICS AND CONTROL 12 416/17 SEM 2 *MCEN30018 THERMODYNAMICS AND FLUID MECHANICS16/17 SEM 2 *MCEN90015 *THERMODYNAMICS15/16 SEM 2 MCEN90026 SOLID MECHANICS ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MCEN90018 ADVANCED FLUID MECHANICS ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MCEN90029 ADVANCED SOLID MECHANICS ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 MCEN90012 DESIGN FOR MANUFACTURE ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MCEN90014 MATERIALS ME3251 MATERIALS FOR ENGINEERS 12 414/15 SEM 2 BMEN90023 BIOMATERIALS ME4253 BIOMATERIALS ENGINEERING 12 414/15 SEM 2 CHEN30005 HEAT AND MASS TRANSPORT PROCESSES ME3122 HEAT TRANSFER 11 414/15 SEM 2 MCEN90011 MANUFACTURING SYSTEM ME3162 MANUFACTURING PROCESSES 11 414/15 SEM 2 ENGR90024 COMPUTATIONAL FLUID DYNAMICS ME4233 COMPUTATION METHODS IN FLUID MECHANICS 12 414/15 SEM 2 MCEN90020 ADVANCED MATERIALS ME3251 MATERIALS FOR ENGINEERS 12 414/15 SEM 2 MCEN90015 THERMODYNAMICS ME3122 HEAT TRANSFER 11 414/15 SEM 2 ELEN90055 CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 4

15/16 SEM 2 MECH9761 AUTOMOBILE ENGINE TECHNOLOGY ME4227 INTERNAL COMBUSTION ENGINE 12 415/16 SEM 2 NMAN4410 FINITE ELEMENT METHODS ME4291 FINITE ELEMENT ANALYSIS 12 414/15 SEM 2 AERO3410 AEROSPACE STRUCTURES 6 ME4212 AIRCRAFT STRUCTURES 12 414/15 SEM 2 MECH9620 COMPUTATIONAL FLUID DYNAMICS ME4233 COMPUTATIONAL METHODS IN FLUID MECHANICS 12 414/15 SEM 2 MECH3610 ADVANCED THERMOFLUIDS ME3122 HEAT TRANSFER 11 414/15 SEM 2 MECH9720 SOLAR THERMAL ENERGY DESIGN ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH9400 MECHANICS OF FRACTURE AND FATIGUE ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MMAN3200 LINEAR SYSTEM AND CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 414/15 SEM 2 MMAN2300 ENGINEERING MECHANICS 2 ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 MTRN3200 ELEMENTS OF MECHATRONIC SYSTEMS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 AVEN2230 AVIATION TECHNOLOGIES ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MANF3100 PRODUCT AND MANUFACTURING DESIGN 6 ME3102 MECHANICAL SYSTEMS DESIGN II 11 414/15 SEM 2 MECH4305 FUNDAMENTAL AND ADVANCED VIBRATION ANALYSIS 6 ME4213 VIBRATION THEORY AND APPLICATIONS 12 414/15 SEM 2 MTRN4230 ROBOTICS ME4245 ROBOT KINEMATICS, DYNAMICS AND CONTROL 12 414/15 SEM 2 MECH4320 ENGINEERING MECHANICS 3 ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 MATS4004 FRACTURE MECHANICS AND FAILURE ANALYSIS 6 ME4255 MATERIALS FAILURE 12 4

17/18 SEM 1 AMME2262 THERMAL ENGINEERING 1 ME2121 ENGINEERING THERMODYNAMICS 11 417/18 SEM 1 AMME2301 MECHANICS OF SOLIDS 1 ME2112 STRENGTH OF MATERIALS 11 4 COHORT AY15/16 AND EARLIER TO MAP TO ME2113.17/18 SEM 1 MECH3361 MECHANICS OF SOLIDS 2 ME2114 MECHANICS OF MATERIALS 11 417/18 SEM 1 AMME2262 THERMAL ENGINEERING 1 ME2121 ENGINEERING THERMODYNAMICS 11 417/18 SEM 1 MECH1400 MECHANICAL CONSTRUCTION 6 ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 AERO3360 AEROSPACE STRUCTURES 1 ME3663 TECHNICAL ELECTIVE 12 415/16 SEM 2 AMME2700 INSTRUMENTATION ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 MTRX2700 MECHATRONICS 2 ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 AMME5510 VIBRATION AND ACOUSTICS ME4213 VIBRATION THEORY AND APPLICATION 12 415/16 SEM 2 AMME3500 SYSTEM DYNAMICS AND CONTROL ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 AMME5101 ENERGY AND THE ENVIRONMENT ME4226 ENERGY AND THERMAL SYSTEMS 12 415/16 SEM 2 MECH5310 ADVANCED ENGINEERING MATERIALS ME3251 MATERIALS FOR ENGINEERING 12 4

15/16 SEM 2 ENSC3009 GEOMECHANICS ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 ENSC3014 ELECTRONIC MATERIALS AND DEVICES ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MECH4428 DEGRADATION OF MATERIALS ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 GENG 5514 FINITE ELEMENT METHODS ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 MECH4401 MECHANICAL ENGINEERING PROJECT PART 1 ME3101 MECHANICAL SYSTEMS DESIGN I 11 413/14 SEM 2 MECH4404 ACOUSTICAL ENGINEERING ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 ENSC2002 ENERGY 6 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 ENSC3003 FLUID MECHANICS 6 ME2134 FLUID MECHANICS 1 11 413/14 SEM 2 MECH3403 MECHANICAL DESIGN [UG] ME3101 MECHANICAL SYSTEMS DESIGN I 11 415/16 SEM 2 PQI3301 TRANSPORT PHENOMENA II ME3122 HEAT TRANSFER 11 415/16 SEM 2 PME2341 VIBRATIONS IN MECHANICAL SYSTEMS ME4213 VIBRATION THEORY AND APPLICATION 12 415/16 SEM 2 PHA3304 GENERAL HYDRAULICS I ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 PME2542 VEHICULAR TRANSMISSION SYSTEMS ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 PNV3210 INTRODUCTION TO NAVAL ARCHITECTURE AND OCEAN ENGINEERING ME4663 TECHNICAL ELECTIVE 12 415/16 SEM 2 PME2557 AERODYNAMICS ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 PNV2614 HYDRODYNAMICS PORT ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 PME2361 HEAT TRANSFER PROCESSES ME3122 HEAT TRANSFER 11 4

SIMON FRASER UNIVERSITY 16/17 SEM 2 ENSC488 INTRODUCTION TO ROBOTICS ME4245 ROBOT MECHANICS AND CONTROL 12 414/15 SEM 2 CHE 314 HEAT TRANSFER ME3122 HEAT TRANSFER 11 414/15 SEM 2 BME 320 HUMAN ANATOMY AND PHYSIOLOGY:CELLS AND TISSUE 3 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECE 370 HEAT TRANSFER 3.5 ME3122 HEAT TRANSFER 11 4

BRAZIL

11 4

AUSTRALIA

Convert to NUS

THE UNIVERSITY OF MELBOURNE

UNIVERSITY OF NEW SOUTH WALES

UNIVERSITY OF WESTERN AUSTRALIA

Partner University Module & Title

AUSTRALIAN NATIONAL UNIVERSITY

UNIVERSITY OF ALBERTA

ME2121 ENGINEERING THERMODYNAMICS

UNIVERSITY OF SYDNEY

UNIVERSITY OF SAO PAULO

16/17 SEM 2 ME3103 MECHANICAL SYSTEMS DESIGN 11 6

Updated as of 2/3/2017 1



Country Partner University AY & Sem Credit TypeCode MC RemarksConvert to NUSPartner University Module & Title

14/15 SEM 2 MECE 451 VIBRATIONS AND SOUNDS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECE 362 MECHANICS OF MACHINES ME3112 MECHANICS OF MACHINES 11 4

13/14 SEM 2 MME4452B ROBOTICS AND MANUFACTURING AUTOMATION 0.5 ME3242 INDUSTRIAL AUTOMATION 12 413/14 SEM 2 MME2213B ENGINEERING DYNAMICS 0.5 ME3112 MECHANICS OF MACHINES 11 413/14 SEM 2 MME4452B ROBOTICS AND MANUFACTURING AUTOMATION 0.5 ME3661 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 MECH462 FINITE ELEMENT ANALYSIS ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 MECH491 COMPUTER-AIDED MANUFACTURING ME3261 COMPUTER-AIDED DESIGN AND MANUFACTURING 12 415/16 SEM 2 MECH464 INDUSTRIAL ROBOTICS ME4245 ROBOT KINEMATICS, DYNAMICS AND CONTROL 12 415/16 SEM 2 MECH481 AERODYNAMICS AND PROPULSION ME4231 AERODYNAMICS AND PROPULSION 12 413/14 SEM 2 MECH478 INTERNAL COMBUSTION ENGINES 3 ME4227 INTERNAL COMBUSTION ENGINES 11 413/14 SEM 2 MECH358 ENGINEERING ANALYSIS ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MECHENG713 ENERGY TECHNOLOGY ME3221 ENERGY CONVERSION PROCESSES 12 413/14 SEM 2 MECH327 THERMAL SYSTEM DESIGN ME3221 ENERGY CONVERSION PROCESSES 12 413/14 SEM 2 MECH468 MODERN CONTROL ENGINEERING ME4246 LINEAR SYSTEMS 12 4

16/17 SEM 2 MIE311H1S THERMAL ENERGY CONVERSION ME3221 SUSTAINABLE ENERGY CONVERSION 12 416/17 SEM 2 MIE550H1S ADVANCED MOMENTUM, HEAT AND MASS TRANSFER ME4225 APPLIED HEAT TRANSFER 12 415/16 SEM 2 AER310H1 GASDYNAMICS ME3232 COMPRESSIBLE FLOW 12 415/16 SEM 2 MSE351 DESIGN AND SIMULATION OF MATERIAL PROCESSES ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 MIE334H1 NUMERICAL METHODS I ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 AER373H1 MECHANICS OF SOLIDS AND STRUCTURES ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MIE411H1 THERMAL ENERGY CONVERSION ME3221 ENERGY CONVERSION PROCESSES 12 415/16 SEM 2 AER302H1 S AIRCRAFT FLIGHT ME4241 AIRCRAFT PERFORMANCE, STABILITY AND CONTR12 414/15 SEM 2 MSE332H1 HEAT AND MASS TRANSFER FOR MATERIALS PROCESSING ME3122 HEAT TRANSFER 11 414/15 SEM 2 MIE303H1 F MECHANICAL AND THERMAL ENERGY CONVERSION PROCESSES ME3221 ENERGY CONVERSION PROCESSES 12 414/15 SEM 2 MIE504H1 APPLIED COMPUTATIONAL FLUID DYNAMICS ME4233 COMPUTATION METHODS IN FLUID MECHANICS 12 414/15 SEM 2 MIE438 MICROPROCESSORS AND EMBEDDED MICROCONTROLLERS ME3661 TECHNICAL ELECTIVE 12 4

17/18 SEM 1 ME322 MECHANICAL DESIGN 1 ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE SHORTFALL OF 0.25 CREDITS17/18 SEM 1 ME456 HEAT TRANSFER 2 0.5 ME4225 APPLIED HEAT TRANSFER 12 417/18 SEM 1 CHE313 APPLICATIONS OF HEAT AND MASS TRANSFER 0.5 ME4225 APPLIED HEAT TRANSFER 12 416/17 SEM 2 ME535 WELDING METALLURGY ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME531 PHYSICAL METALLURGY APPLIED TO MANUFACTURING ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME321 KINEMATICS AND DYNAMICS OF MACHINES ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 ME524 ADVANCED DYNAMICS AND VIBRATIONS ME4213 VIBRATION THEORY AND APPLICATIONS 12 416/17 SEM 2 *ME380 *MECHANICAL ENGINEERING DESIGN WORKSHOP ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE SHORTFALL OF 0.25 CREDITS16/17 SEM 2 ME360 INTRODUCTION TO CONTROL SYSTEM ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 ME526 FATIGUE AND FRACTURE ANALYSIS ME4255 MATERIALS FAILURE 12 416/17 SEM 2 ME353 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 ME436 WELDING AND JOINING PROCESSES ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MNS331 BIOMATERIALS ME4253 BIOMATERIALS ENGINEERING 12 415/16 SEM 2 CHE 313 APPLICATIONS OF HEAT AND MASS TRANSFER ME4225 APPLIED HEAT TRANSFER 12 415/16 SEM 2 ECE457B FUNDAMENTALS OF COMPUTATIONAL INTELLIGENCE ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME456 HEAT TRANSFER 2 ME4225 INDUSTRIAL HEAT TRANSFER 12 414/15 SEM 2 ME563 TURBOMACHINERY ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MTE360 AUTOMATIC CONTROL SYSTEM 0.5 ME2142 FEEDBACK CONTROL SYSTEMS 11 414/15 SEM 2 ME452 ENERGY TRANSFER IN BUILDINGS 0.5 ME4223 THERMAL ENVIRONMENTAL ENGINEERING 12 413/14 SEM 2 ME564 AERODYNAMCIS 0.5 ME4231 AERODYNAMICS AND PROPULSION 12 413/14 SEM 2 CIVE422 FINITE ELEMENT ANALYSIS ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 2 ME340 MANUFACTURING PROCESSES 0.5 ME3162 MANUFACTURING PROCESSES 11 413/14 SEM 2 ME360 INTRODUCTION TO CONTROL SYSTEM 0.5 ME3661 TECHNICAL ELECTIVE 12 4

13/14 SEM 2 LE/ENG 4370.300 FINITE ELEMENT METHODS IN ENGINEERING DESIGN ME4291 FINITE ELEMENT ANALYSIS 11 4

16/17 SEM 2 EP26001 ADVANCED FLUID MECHANICS ME2135 FLUID MECHANICS II 11 416/17 SEM 2 EM151 THEORETICAL MECHANICS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 ME208 *DESIGN AND MANUFACTURING II ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE 1.9 CONTACT HOURS 16/17 SEM 2 PO334 WIND ENERGY TECHNOLOGY AND IMPLEMENTATION ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME402 DYNAMICS OF MACHINERY ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 PO328 PRINCIPLE AND TECHNOLOGY OF ENERGY CONSERVATION ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 BE411 ENGINEERING DESIGN - PRODUCT DESIGN & DEVELOPMENT ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 ME200 ENGINEERING THERMODYNAMICS I ME2121 ENGINEERING THERMODYNAMICS 11 416/17 SEM 2 ME206 DYNAMICS AND MECHANICAL VIBRATIONS ME4213 VIBRATION THEORY AND APPLICATIONS 12 416/17 SEM 2 ME315 HEAT AND MASS TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 ME350 DESIGN AND MANUFACTURING II ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 ME204 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 ME400 AIR CONDITIONING ENGINEERING ME4223 THERMAL ENVIRONMENTAL ENGINEERING 12 416/17 SEM 2 ME300 THEORY AND DESIGN OF MACHINES AND MECHANISMS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 ME345 ENGINEERING MATERIALS ME2151 PRINCIPLES OF MECHANICAL ENGINEERING MATE11 416/17 SEM 2 BU354 QUALITY MANAGEMENT ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME373 MANUFACTURING PROCESSES I ME3162 MANUFACTURING PROCESSES 11 414/15 SEM 2 BE411 PRODUCT DESIGN AND DEVELOPMENT ME3102 MECHANICAL SYSTEMS DESIGN 2 11 4

CANADA

CHINA

UNIVERSITY OF WATERLOO

THE UNIVERSITY OF WESTERN ONTARIO

UNIVERSITY OF BRITISH COLUMBIA (For this Uni, 3ECS = 4MCs)

UNIVERSITY OF TORONTO

YORK UNIVERSITY

SHANGHAI JIAOTONG UNIVERSITY





14/15 SEM 2 - MECHANICAL DESIGN 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 - CIVIL AVIATION ENGINEERING ENGLISH ME3662 TECHNICAL ELECTIVE 12 4

13/14 SEM 2 - INTRODUCTION TO FUEL CELL TECHNOLOGY 2.013/14 SEM 2 - AUTOMOBILE TECHNOLOGY 2.013/14 SEM 2 - AUTOMATIC MANUFACTURING SYSTEM 1.515/16 SEM 2 84476 INNOVATION MANAGEMENT IN PRODUCT DEVELOPMENT ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 84474 DESIGN FOR SUSTAINABILITY - ECO DESIGN ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 103308 FATIGUE STRENGTH OF STRUCTURE ME3663 TECHNICAL ELECTIVE 12 415/16 SEM 2 18781 MECHANICS OF COMPOSITE MATERIALS ME3661 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 41742 INTRODUCTION TO MICRO MECHANICAL SYSTEMS DESIGN AND MANUFACTURE ME4661 TECHNICAL ELECTIVE 12 4

13/14 SEM 2 41632 ROBUST DESIGN OF PRODUCTS AND MECHANISMS ME3612 TECHNICAL ELECTIVE 12 413/14 SEM 2 41078 INDUSTRIAL DESIGN 2 ME3102 MECHANICAL SYSTEM DESIGN 2 11 4

ME3103 MECHANICAL SYSTEMS DESIGN 11 6EX3888 EXCHANGE UEM 27 4

15/16 SEM 2 M-COM-U1 COMPOSITE MATERIALS AND MANUFACTURING ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 X-GEE-U01 ERP AND EXCEL ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 SB6-POM-U1 PROJECT ORGANIZATION & MANAGEMENT ME4663 TECHNICAL ELECTIVE 12 415/16 SEM 2 OB-AP-U1 ANDROID PROGRAMMING ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 X-GMAA2-U4 MANAGERIAL ACCOUNTING 2 ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 *M-COM-U1. COMPOSITE MATERIALS AND MANUFACTURING ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 *X-SCM1-U02 SUPPLY CHAIN MANAGEMENT 1 ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 *X-PMA1-U02. *PROJECT MANAGEMENT 1 ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 X-MDP1-U1 MECHANICAL DESIGN PROJECT ME3102 MECHANICAL SYSTEM DESIGN II 11 415/16 SEM 2 X-VIB1-U06 STRUCTURAL VIBRATIONS ME4213 VIBRATION THEORY AND APPLICATION 12 4

14/15 SEM 2 IBDAMP DEVELOPING ENGINEERING APPLICATIONS FOR MOBILE PLATFORMS ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 SOB4IB STARTING YOUR OWN BUSINESS 15 ME4662 TECHNICAL ELECTIVE 12 4

14/15 SEM 2 EMB4 EMBEDDED SYSTEMS 4 5 ME3241DIGITAL ELECTRONICS, MICROPROCESSORS AND APPLICATIONS 12 4

14/15 SEM 2 NAUCD1 USER CENTRED DESIGN 5 ME3663 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 EN1120 HEAT TRANSFER 3 ME3122 HEAT TRANSFER 11 415/16 SEM 2 *EN1600 *RENEWABLE ENERGY

15/16 SEM 2 *EN1700 *INTRODUCTION TO NEUTRONICS AND NUCLEAR REACTOR PHYSICS15/16 SEM 2 *MG2817 *APPLICATIONS OF THE FINITE ELEMENT METHOD15/16 SEM 2 EN2910 AIRCRAFT DESIGN 3 ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 HUM-408(B) INDUSTRIAL DESIGN VI 2 ME3102 MECHANICAL SYSTEMS DESIGN II 11 414/15 SEM 2 ME-417 COMPUTER-AIDED ENGINEERING 5 ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME452 ENERGY CONVERSION ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME-432 FRACTURE MECHANICS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 BIOENG-442 BIOMATERIALS ME4253 BIOMATERIALS ENGINEERING 12 414/15 SEM 2 ME-343 COMPRESSIBLE-FLUID DYNAMICS 4 ME3232 COMPRESSIBLE FLOW 12 414/15 SEM 2 *ME-606 *INTRODUCTION TO AEROELASTICITY ME4235 INTRODUCTION TO AEROELASTICITY 12 414/15 SEM 2 ME-341 HEAT AND MASS TRANSFER ME3122 HEAT TRANSFER 11 414/15 SEM 2 ME452 ENERGY CONVERSION ME3221 ENERGY CONVERSION PROCESSES 11 414/15 SEM 2 CS-487 INDUSTRIAL AUTOMATION 3 ME3242 INDUSTRIAL AUTOMATION 12 416/17 SEM 2 EN2910 AIRCRAFT DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 6 *TO COMPENSATE FOR 16 CONTACT HOURS16/17 SEM 2 EN1920 AERODYNAMICS AND ENERGY SCIENCE LABORATORY ME3663 TECHNICAL ELECTIVE 12 4 *TO COMPENSATE FOR 5 CONTACT HOURS16/17 SEM 2 MG2818 INTRODUCTION TO OIL & GAS EXPLORATION & PRODUCTION ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 PR4300 COGENERATION AND ENERGY PRODUCTION ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 EN1120 HEAT TRANSFER ME3122 HEAT TRANSFER 11 4

15/16 SEM 2 *MG2812 *INTRODUCTION TO ACOUSTICS: INDUSTRIAL AND MUSICAL ACOUSTICS15/16 SEM 2 *MG2816 *MICRO-ELECTRO-MECHANICAL SYSTEMS (MEMS)14/15 SEM 2 MG2816 MICRO-ELECTRO-MECHANICAL SYSTEMS (MEMS) ME4282 MICRO SENSORS AND MICRO ACTUATORS 11 414/15 SEM 2 MG2817 APPLICATION OF THE DINITE ELEMENT METHOD ME4291 FINITE ELEMENT ANALYSIS 11 413/14 SEM 2 EN1500 NUCLEAR ENGINEERING 3 ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 EN1400JB COMBUSTION MODELING AND SIMULATION 3 ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 EN2920 POWERTRAIN DESIGN 3 ME3661 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 *GMD-4-THERMI *HEAT TRANSFER15/16 SEM 2 *GEN-3-RAY *HEAT RADIATION TRANSFER15/16 SEM 2 *GMC-4-THEMT2 *APPLIED THERMODYNAMICS AND ENERGY CONVERSION15/16 SEM 2 *GEN-3-THERMO-S2 *THERMODYNAMICS15/16 SEM 2 GMD-4-MFA APPLIED FLUID MECHANICS 4 ME2135 FLUID MECHANICS II 11 4

ME3661 TECHNICAL ELECTIVE 12 4

ENGINEERING THERMODYNAMICS 11 4

8

DENMARK

16/17 SEM 2 M-PTE4U01 MECHANICAL DESIGN

ME3122

TECHNICAL ELECTIVE

ME2121

8

4

TECHNICAL UNIVERSITY OF DENMARK (DTU)

ZHEJIANG UNIVERSITY

UNIVERSITY OF SOUTHERN DENMARK

ECOLE CENTRALE PARIS

ECOLE POLYTECHNIQUE FEDERALE DE LAUSANNE

CROATIA UNIVERSITY OF ZAGREB

12

ME3661 AND ME3662

11HEAT TRANSFER

12

TECHNICAL ELECTIVEME3661 and ME3662

XIAMEN UNIVERSITY





15/16 SEM 2 *GM GMD-5 *DYNAMIQUE DES MACHINESC15/16 SEM 2 *GMC-4-VAVIB2 *VIBRATIONS DES SYSTÈMES CONTINUS15/16 SEM 2 GMC-3-MGMEC2 KINEMATICS AND DYNAMICS OF MACHINERY ME3663 TECHNICAL ELECTIVE 12 415/16 SEM 2 GMC-3-CMCON2 MECHANICAL ENGINEERING 2 ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 GMC-3-AUTOM2 LINEAR SYSTEMS AND CONTROL ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 GMC-3-AUTOM2 LINEAR SYSTEMS AND CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 415/16 SEM 2 *GMGMC-5-CIM2S-M3C*AUTOM ETUDE DES MATÉRIAUX COMPOSITES2GMC15/16 SEM 2 *GMD-4-CINT *CONCEPTION INTÉGRÉEM215/16 SEM 2 *GMC-3-ANANUM2 *MÉTHODES NUMÉRIQUES15/16 SEM 2 *GMD-4-MOT *MOTEURS15/16 SEM 2 *GMD-5-MECATR *MÉCATRONIQUE - CONTRÔLE ACTIF DES STRUCTURES15/16 SEM 2 *GMD-5-RDTRIB *RECHERCHE ET DÉVELOPPEMENT EN TRIBOLOGIEM215/16 SEM 2 *GMC-3-PRODU2 *MÉTHODES15/16 SEM 2 *GMGMC-3-MFMAH2C *MACHINES HYDRAULIQUES

15/16 SEM 2 *M1-NANONANO-07 *INTRODUCTION À LA CONCEPTION DE SYSTEMS

15/16 SEM 2 *GMC-4-PRODU2

*COMMANDE NUMÉRIQUE ET FABRICATION ASSISTÉE PAR ORDINATEUR (CN ETFAO)

15/16 SEM 2 *GMC-4-THEMT2 APPLIED THERMODYNAMICS AND ENERGY CONVERSION ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 GMD-3-CMAO1 COMPUTER AIDED MECHANICAL DESIGN AND MACHINE ELEMENTS ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 *GMC-3-AUTOGMC-5-C*OUTILS CAO PRODUITS PROCESSM2GMC-3-AUTOM215/16 SEM 2 *GMC-4-MSEF2 *ELÉMENTS FINIS 15/16 SEM 2 *GMC-3-M1-NANONAN*VECTORISATION DE MÉDICAMENTS-3-AUTOM2

15/16 SEM 2 *M1-NANONANO-10 *MEMS 2ET NEMS 15/16 SEM 2 *M1-NANONANO- 06 *NANOMÉCANIQUEAUTOM2GMC15/16 SEM 2 *GMC-GMC-5-CIM2S-M*FATIGUE ET MÉCANIQUE DE LA RUPTURE-AUTOM2GMC15/16 SEM 2 GMGMC-4-AUTOM2 MODÉLISATION DES SYSTÈMES DYNAMIQUES ET COMMANDE AVANCÉE C- ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 SGM-4-ELEFIN FINITE ELEMENTS ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 GMD-3-ANEF NUMERICAL ANALYSIS AND FINITE ELEMENT METHOD ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 GMC-4-CMCON2 ME3101 MECHANICAL SYSTEMS DESIGN I 11 415/16 SEM 2 GMC-3-MFLUI 1 FLUID MECHANICS ME2134 FLUID MECHANICS I 11 413/14 SEM 2 GMD-4-MFA APPLIED FLUID MECHANICS 4 ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 SEM4EUS4COE ENERGY CONVERSION ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 4EUS4HMT HEAT AND MASS TRANSFERS ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 3PMEAUT6 *AUTOMATICS ME2142 FEEDBACK CONTROL SYSTEMS 11 4 TO COMPENSATE FOR SHORTFALL OF 16.40 CONTACT HOURS16/17 SEM 2 4EUS4HMT HEAT AND MASS TRANSFERS ME2121 ENGINEERING THERMODYNAMICS 11 416/17 SEM 2 4EUS4PRO TEAM PROJECT ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 4EUS4MSR SOIL AND ROCK MECHANICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 4EUS4HSL FREE SURFACE HYDRAULICS ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 4EUS4AUT *AUTOMATICS 2 ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 1.8 CONTACT HOURS16/17 SEM 2 PD4GMP0825 COLLABORATIVE ENGINEERING DESIGN PROJECT ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 ME4EUS4PRO ENGINEERING PROJECT IN ENERGY, WATER OR ENVIRONMENTAL SCIENCES ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 WGUS2024 DISCRETE EVENT SIMULATION ME4663 TECHNICAL ELECTIVE 12 415/16 SEM 2 WGUS2054 QUALITY AND PROCESS DEVELOPMENT ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 WGUS2044 INFORMATION SYSTEMS MANAGEMENT ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 WGUS2034 GLOBAL FIRM AND ECONOMIC DYNAMICS ME4661 TECHNICAL ELECTIVE 12 4 NOT SUITABLE TO MAP TO TE (PROF QUAN)15/16 SEM 2 4GUL0705 INVENTORY MANAGEMENT ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 *4GUP10A5 *INNOVATIVE PRODUCTS: TECHNOLOGIES FOR INTELLIGENT PRODUCTS ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 4EUS4PSJ PRODUCTION AND STORAGE OF ENERGY ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 4GUP10B5 EVALUATION TECHNIQUE OF A PRODUCT ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 4GMPO0825 COLLABORATIVE ENGINEERING DESIGN PROJECT ME3102 MECHANICAL SYSTEMS DESIGN II 11 415/16 SEM 2 WGUS2014 CREATIVITY AND INNOVATIVE DESIGN ME4263 FUNDAMENTALS OF PRODUCT DEVELOPMENT 12 4

UNIVERSITY OF TECHNOLOGY OF COMPIEGNE 15/16 SEM 2 MQ17 INTRODUCTION TO MECHANICAL PROPERTIES AND ENGINEERING OF MATERIALS ME3251 MATERIALS FOR ENGINEERS 12 4

14/15 SEM 2 CS03 PROJECT MANAGEMENT ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MQ03 DYNAMICS AND VIBRATIONS OF MECHANICAL SYSTEMS ME4213 VIBRATION THEORY AND APPLICATION 11 413/14 SEM 2 MQ6A MODELING STRUCTURES USIG FINITE ELEMENTS 6 ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MAB1 MATERIALS ANALYSIS AND MACROSCOPIC CHARACTERISTICS 6 ME4662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MAB0 MATERIALS ANALYSIS AND MICROSCOPIC CHARATERISTICS 6 ME4661 TECHNICAL ELECTIVE 12 4

17/18 SEM 1 MOL32306 MATERIALS PERFORMANCE 6 ME3662 TECHNICAL ELECTIVE 12 417/18 SEM 1 MEI51016 DIGITAL MANUFACTURING 2 2 ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE SHORTFALL OF 4 CREDITS17/18 SEM 1 MEI51006 DIGITAL MANUFACTURING 1 2 ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE SHORTFALL OF 4 CREDITS17/18 SEM 1 MEI71006 DESIGN OF MECHTRONIC SYSTEMS 517/18 SEM 1 MEI71056 CONTROL OF MECHATRONIC SYSTEMS 5

MEI41206 SYSTEMS ENGINEERINGMEI19006 ADVANCED PROJECT WORK

TECHNICAL ELECTIVE 12 8

12 8

ME3112 MECHANICS OF MACHINES 11 4

4

TECHNICAL ELECTIVE 12


TECHNICAL ELECTIVE

ME4661 and ME4662

4

12

ME4663

4

4

12

FRANCEINSTITUT NATIONAL DES SCIENCES APPLIQUÉES DE LYON (INSA, LYON)

UNIVERSITY OF TECHNOLOGY OF TROYES

NATIONAL POLYTECHNIC INSTITUTE OF GRENOBLE (INSTITUT NATIONAL

POLYTECHNIQUE DE GRENOBLE [INPG])

4

MECHANICAL SYSTEMS DESIGN 11 6

ME4661

ME4662

ME4661 TECHNICAL ELECTIVE

MECHANICAL SYSTEMS DESIGN 11 6



ME3103

ME4662 and ME4663

16/17 SEM 2

ME3103





16/17 SEM 2 MEI41206 SYSTEMS ENGINEERING ME3661 TECHINICAL ELECTIVE 12 4

16/17 SEM 2 MOL22226 *JOINING METHODS FOR METALS ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 7 CONTACT HOURS

16/17 SEM 2 MOL32326 *ANALYSIS OF MATERIALS PERFORMANCE ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 7 CONTACT HOURS16/17 SEM 2 ASE1258 INTRODUCTION TO CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 4

16/17 SEM 2 MOL22226 *JOINING METHODS FOR METALS ME3663 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 7 CONTACT HOURS

16/17 SEM 2 MOL42136 *EXTRUSION ME3662 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 21 CONTACT HOURS

16/17 SEM 2 *MEI41206 *SYSTEMS ENGINEERING ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 43.5 CONTACT HOURS16/17 SEM 2 TTI55006 DEMOLA PROJECT WORKS ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 ASE2116 SYSTEMS AND CONTROLS ME4246 LINEAR SYSTEMS 12 416/17 SEM 2 MOL4222 COMPOSITES ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 MOL42196 *ADHESION AND SURFACE MODIFICATIONS ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 21 CONTACT HOURS15/16 SEM 2 MEI-62006 INTRODUCTION TO INDUSTRIAL INTERNET ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 ELT-22246 SEMICONDUCTOR DEVICE PHYSICS ME3663 TECHNICAL ELECTIVE 12 415/16 SEM 2 IHA-2377 SIMULATION OF MACHINE SYSTEMS ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 MOL-42027 POLYMER COMPOSITES ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 ASE-2316 INTRODUCTION TO MICROSYSTEM TECHNOLOGY 5 ME3281 MICROSYSTEM DESIGN & APPLICATION 12 414/15 SEM 2 MOL-32246 INTRODUCTION TO NDT TECHNIQUES 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 IHA-2376 SIMULATION OF MACHINE SYSTEMS 6 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MEI-24406 FACTORY INFORMATION SYSTEM ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MEI-45606 ASSEMBLY TECHNOLOGIES AND SYSTEMS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MEI-64106 MECHANICAL VIBRATION 6 ME4213 VIBRATION THEORY AND APPLICATIONS 12 414/15 SEM 2 MEI-62106 DESIGN OF MECHATRONIC SYSTEMS 5 ME3102 MECHANICAL SYSTEM DESIGN 2 11 413/14 SEM 2 TTE-30106 PRODUCT DEVELOPMENT 4 ME4263 FUNDAMENTALS OF PRODUCT DEVELOPMENT 12 413/14 SEM 2 MOL-32266 FAILURE ANALYSIS 5 ME4255 MATERIALS FAILURE 12 413/14 SEM 2 EDE-31106 DESIGN OF MECHATRONIC SYSTEMS 5 ME3102 MECHANICAL SYSTEMS DESIGN II 11 413/14 SEM 2 TTE-58026 DESIGN OF ROBOT SYSTEMS 5 ME3101 MECHANICAL SYSTEMS DESIGN I 11 413/14 SEM 2 MOL-42026 COMPOSITES ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MOL-3316 WEAR OF MATERIALS ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MOL-3116 INTRODUCTION TO NDT TECHNIQUES 3 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MOL-62276 PRODUCT DEVELOPMENT AND INNOVATIONS ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 TTE-50306 CONTROL IN ROBOTICS AND AUTOMATION ME4245 ROBOT KINEMATICS, DYNAMICS AND CONTROL 11 413/14 SEM 2 EDE-33156 MACHINERY DIAGNOSTICS, 5 CR ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 EDE-34106 MECHANICAL VIBRATIONS 6 ME4213 VIBRATION THEORY AND APPLICATION 11 413/14 SEM 2 MOL-53236 CORROSION AND ITS PREVENTION 6 ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 MOL-32256 WEAR OF MATERIALS 6 ME3662 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 477524S PROCESS OPTIMIZATION ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 *477508S *AUTOMATION IN METALLURGICAL INDUSTRY ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 477607S ADVANCED CONTROL AND SYSTEMS ENGINEERING ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 461026S CONTINUUM MECHANICS 6 ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 461019S MECHANICAL VIBRATION 6 ME4213 VIBRATION THEORY AND APPLICATION 12 414/15 SEM 2 461021S FRACTURE MECHANICS 5 ME4255 MATERIALS FAILURE 12 4

16/17 SEM 2 MSCAME1011/12 FINITE ELEMENT METHODS FOR ENGINEERS ME4291 FINITE ELEMENT ANALYSIS 12 416/17 SEM 2 MSAE2003/13 ELECTRIC DRIVES AND STORAGE SYSTEMS ME4662 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 MSAE1109/13 CONTROL ENGINEERING ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MSMMECAM2211 MODELING, MODEL REDUCTION AND SIMULATION IN LASER PROCESSING - DESIGN ME3663 TECHNICAL ELECTIVE 12 416/17 SEM 2 *MSPSE2101/13 *CONTROL ENGINEERING ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MSPSE2111/13 MACHINE DESIGN PROCESS ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MSPSE-1105/13 PRODUCTION METROLOGY ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 - ENGINE ACOUSTICS 5 ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MSALLGMB-1018 CONTINUUM MECHANICS 6 ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 MSSISC-5104 ALTERNATIVE VEHICLE PROPULSION SYSTEMS ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MSCAME-2303/12 STRUCTURAL DESIGN OF VEHICLES ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MSSISC-5102 INTERNAL COMBUSTION ENGINE I ME4227 INTERNAL COMBUSTION ENGINE 12 413/14 SEM 2 BSCES-1102/11 MATERIAL AND MATERIAL SCIENCE OR INTRODUCTION TO MATERIALS SCIE4 ME2151 PRINCIPLES OF MECHANICAL ENGINEERING MATE11 413/14 SEM 2 MSCAME-2201/12 FINITE ELEMENT METHODS IN LIGHTWEIGHT DESIGN 5 ME4291 FINITE ELEMENT ANALYSIS 12 4

13/14 SEM 2 BSMB-6810/11 FLUGDYNAMIK ME4241AIRCRAFT PERFORMANCE, STABILITY AND CONTROL 11 4

13/14 SEM 2 MSLRT-1003STRUKTURENTWURF FUR LUFT-UND RAUMFAHRT (STRUCUTRE DESIGN FOR AEROSPACE) ME4212 AICRAFT STRUCTURES 11 4

13/14 SEM 2 MSSiSc-5401 COMPUTATIONAL FLUID DYNAMICS I 4 ME4233 COMPUTATIONAL METHODS IN FLUIDS MECHANIC 11 413/14 SEM 2 MSAE2112/13 MOBILITY RESEARCH AND TRANSPORTATION MODELING ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MSAE2006/13 STRUCTURAL DESIGN OF VEHICLES ME3661 TECHNICAL ELECTIVE 12 4

13/14 SEM 2 MSTKW-201/13 WERKSTOFFWISSENSCHAFT DER METALLE II (MATERIAL SCIENCE OF METALS II) ME2151 PRINCIPLES OF MECHANICAL ENGINEERING MATERIALS 11 4

13/14 SEM 2 MSCAME-2103/12 WELDING AND JOINING TECHNOLOGIES 6 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MSMME-1105/13 MACHINE TOOLS ME3664 TECHNICAL ELECTIVE 12 413/14 SEM 2 MSPSE-1102/13 INDUSTRIAL LOGISTICS ME3663 TECHNICAL ELECTIVE 12 4

TAMPERE UNIVERSITY OF TECHNOLOGY

FINLAND

UNIVERSITY OF OULU

RWTH AACHEN UNIVERSITY





13/14 SEM 2 MSPSE-1106/13 FACTORY PLANNING ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 0330L477 ENERGY ENGINEERING II ME3663 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 0330L161THERMALLY DRIVEN COOLING COMPONENTS AND SYSTEMS (KALTETECHNIK II) ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 0334L173A SINTERING AND ADDITIVE MANUFACTURING ME3662 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 0334L172*NANOMATERIALS: SYNTHESIS, SIZE DEPENDENT PROPERTIES AND APPLICATIONS ME3662 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 7 CONTACT HOURS

16/17 SEM 2 ENERGY AND DEVELOPMENT PROJECT ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 TECHNOLOGY MANAGEMENT ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 SIMULATION OF PRODUCTION SYSTEMS ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 0430 L 282 WIND POWER GENERATION ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 - CAD MODELING AND COLLABORATION IN ENGINEERING DESIGN ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 - CONSTRUCTION PROJECT - ENGINEERING DESIGN PROJECT ME3102 MECHANICAL SYSTEMS DESIGN 11 4

16/17 SEM 2 NIL16-25-5120 ENGINEERING MECHANICS III (DYNAMICS) ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 NIL16-11-5010 FUNDAMENTAL FLUID MECHANICS ME2135 FLUID MECHANICS II 11 4

16/17 SEM 2 NIL16-05-5080 APPLIED PRODUCT DEVELOPMENT ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 6.5 CONTACT HOOURS

16/17 SEM 2 1698-3023 PRODUCT DESIGN PROJECT ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 26 CONTACT HOOURS

16/17 SEM 2 1614-5030 HEAT AND MASS TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM2 1623-5010 CONTROL ENGINEERING ME2142 FEEDBACK CONTROL SYSTEMS 12 4

16/17 SEM 2ADVANCES IN DIGITAL SIGNAL PROCESSING: IMAGING AND INAGE PROCESSING ME3361 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 16-04-3114 SPACE PROPULSION AND SPACE TRANSPORTATION SYSTEMS ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 *16-27-5030-VL *AUTOMOTIVE DEVELOPMENT TRENDS 4

15/16 SEM 2 *16-20-5020*ENERGIESYSTEME II (REGENERATIVE ENERGIESYSTEME) ENGERGY SYSTEM II

14/15 SEM 2 *16-27-5030-VL *AUTOMOTIVE DEVELOPMENT TRENDS 414/15 SEM 2 *16-11-5100-VL *FLUID MECHANICS IN EMERGING TECHNOLOGIES 414/15 SEM 2 *16-08-5040 *MATERIALS TECHNOLOGY AND APPLICATIONS14/15 SEM 2 *16-12-5020-VL *DESIGN WITH ADVANCED COMPOSITE MATERIALS II

14/15 SEM 2 *18-ZO-2080-UE*ADVANCES IN DIGITAL SIGNAL PROCESSING: IMAGING AND IMAGE PROCESSING

14/15 SEM 2 *18-ZO-2080-VL*ADVANCES IN DIGITAL SIGNAL PROCESSING: IMAGING AND IMAGE PROCESSING

14/15 SEM 2 *16-12-5010-VL *DESIGN WITH ADVANCED COMPOSITE MATERIAL I14/15 SEM 2 *16-61-5010-VL *ENGINEERING MECHANICS II (ELASTOSTATICS)14/15 SEM 2 *16-27-5030-VL *AUTOMOTIVE DEVELOPMENT TRENDS14/15 SEM 2 *16-07-5060-VL *PRINCIPLES OF CAE/CAD (LECTURE)14/15 SEM 2 *16-07-5060-UE *PRINCIPLES OF CAE/CAD (PRACTICE)

14/15 SEM 2 16-64-5180-VL HIGHER ORDER METHODS FOR FLOW SIMULATION AND OPTIMIZATION 4 ME4233 COMPUTATIONAL METHODS IN FLUIDS MECHANICS 12 4

14/15 SEM 2 16-11-5060-VL AERODYNAMIC II 6 ME3232 COMPRESSIBLE FLOW 12 4

16/17 SEM 2 METHODS OF INTEGRATED PRODUCT DEVELOPMENT ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 INTEGRATED PRODUCT DEVELOPMENT AND LIGHTWEIGHT DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 416/17 SEM 2 INTRODUCTION TO CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 VIBRATION THEORY ME4213 VIBRATION THEORY AND APPLNS 12 416/17 SEM 2 AERODYNAMICS AND FLIGHT MECHANICS 1 ME4231 AERODYNAMICS AND PROPULSION 12 416/17 SEM 2 HEAT AND MASS TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 FINITE ELEMENTS METHODS ME4291 FINITE ELEMENTS ANALYSIS 12 416/17 SEM 2 MECHANICAL DESIGN METHODOLOGY ME3103 MECHANICAL SSTEMS DESIGN 11 616/17 SEM 2 INTRODUCTION TO CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 4

15/16 SEM 2 MOLECULAR MODELING AND COMPUTATIONAL FLUID DYNAMICS ME4233COMPUTATIONAL METHODS IN FLUIDS MECHANICS 12 4

15/16 SEM 2 HIGH-ORDER FEM ME4291 FINITE ELEMENT ANALYSIS 12 4

15/16 SEM 2PRACTICAL COURSE PRODUCT DEVELOPMENT, MATERIALS AND PRODUCTION ME3102 MECHANICAL SYSTEMS DESIGN II 11 4

15/16 SEM 2 - HEAT TRANSFER 6 ME3122 HEAT TRANSFER 11 4

15/16 SEM 2 -MECHANICS IV (KINETICS II, OSCILLATIONS, ANALYTICAL MECHANICS, MULTIBODY SYSTEMS) ME3112 MECHANICS OF MACHINES 11 4

15/16 SEM 2 - INTEGRATED PRODUCT DEVELOPMENT AND LIGHTWEIGHT DESIGN ME3102 MECHANICAL SYSTEMS DESIGN II 11 4

16/17 SEM 2 WM0799WM0799 INTRODUCTION TO NUCLEAR ENERGY ME4661 EXCHANGE ELECTIVE 12 416/17 SEM 2 MW2267 DESIGN OF WIND TURBINE ROTORS ME3103 MECHNICAL SYSTEMS DESIGN 11 616/17 SEM 2 MW2152 MODELING, CONTROL AND DESIGN OF WIND ENERGY SYSTEMS ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSTATE 30 CONTACT HOURS16/17 SEM 2 MW2152 MODELING, CONTROL AND DESIGN OF WIND ENERGY SYSTEMS ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 MW0085 MULTIDISCIPLINARY DESIGN OPTIMIZATION ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MW2314 AIRCRAFT SYSTEMS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MW1364 INTERNAL COMBUSTION ENGINE ME4227 INTERNAL COMBUSTION ENGINES 12 4

5

4

4

12

12

12 4

TECHNICAL ELECTIVEME3661

TECHNICAL UNIVERSITY OF DARMSTADT

4


GERMANY

TECHNICAL UNIVERSITY OF BERLIN

TECHNICAL UNIVERSITY OF HAMBURG


ME3662


TECHNICAL ELECTIVEME3661

12

12

4ME3662 TECHNICAL ELECTIVE

4





16/17 SEM 2 BV430008 (MW0236) STRUCTURAL DYNAMICS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 *MW2152 *MODELING, CONTROL AND DESIGN OF WIND ENERGY SYSTEMS ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MW1410 HEAT TRANSFER (MSE) ME3122 HEAT TRANSFER 11 416/17 SEM 2 0000000408 NANOSTRUCTURED SOFT MATERIALS 1 ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MW0884 FUNDAMENTALS OF NUCLEAR ENGINEERING ME4661 TECHNICAL ELECTIVE 12 416/17 SEM 1 MW1421 DYNAMICS OF MECHANICAL SYSTEMS ME3112 MECHANICS OF MACHINES 11 415/16 SEM 2 MW0642 AN INTRODUCTION TO MICRO-FLUIDIC SIMULATIONS 3 ME3661 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 IN2314DISTRIBUTED RECONFIGURABLE INDUSTRIAL AUTOMATION AND CONTROL SYSTEMS ME3242 AUTOMATION 12 4

15/16 SEM 2 MW2149 INTRODUCTION TO WIND ENERGY 5 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 0000000882 SEMINAR ON RENEWABLE AND SUSTAINABLE ENERGY SYSTEMS 5 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 *0000003287 *HELICOPTER AERODYNAMICS: ADVANCED TOPICS14/15 SEM 2 *0000001292 *MEMBRANE STRUCTURES14/15 SEM 2 820090348 ON-ORBIT DYNAMICS AND ROBOTICS ME3661 TECHNICAL ELECTIVE 12 4

14/15 SEM 2 220009881 PRINCIPLES OF ENGINEERING DESIGN AND PRODUCTION SYSTEMS ME4263 FUNDAMENTALS OF PRODUCT DEVELOPMENT 12 4

14/15 SEM 20000002805 / 0000002806 MODELING, CONTROL AND DESIGN OF WIND ENERGY SYSTEMS 5 ME3662 TECHNICAL ELECTIVE 12 4

14/15 SEM 2 MW1354 RENEWABLE ENERGY TECHNOLOGY I + II - ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 0000002639 MATERIALS IN ENGINEERING ME3251 MATERIALS IN ENGINEERS 12 414/15 SEM 2 MW2228 AEROELASTICITY 5 ME4235 INTRODUCTION TO AEROELASTICITY 12 414/15 SEM 2 MW0461 VIBRATION MEASUREMENT ME4213 VIBRATION THEORY AND APPLICATIONS 12 414/15 SEM 2 *MW0144 *AEROELASTICS ME4235 INTRODUCTION TO AEROELASTICITY 12 414/15 SEM 2 0021351782 HEAT TRANSFER (MSE) ME3122 HEAT TRANSFER 11 414/15 SEM 2 2400918400 USER EXPERIENCE ENGINEERING ME3664 TECHNICAL ELECTIVE 12 414/15 SEM 2 - NEURAL ENGINEERING: IMPLANTS, INTERFACES AND ALGORITHMS ME4661 TECHNICAL ELECTIVE 12 4

13/14 SEM 2 0000002251ENGINEERING MODELS IN STRUCTURAL DYNAMICS AND VIBROACOUSTICS ME4213 VIBRATIONS THEORY & APPLICATIONS 12 4

13/14 SEM 2 *MW2136 *DYNAMICS OF STRUCTURES 3 ME4213 VIBRATION THEORY AND APPLICATIONS 11 4 TO COMPENSATE FOR SHORTFALL OF 5 CONTACT HOURS13/14 SEM 2 0000000849 THERMAL POWER PLANTS ME3221 ENERGY CONVERSION PROCESSES 12 413/14 SEM 2 MW0376 BIOFLUID MECHANICS - ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MWI1581 FLUID MACHINERY ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MWI1532 THERMAL POWER PLANTS ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 MW1422 THERMAL SEPARATION PROCESSES ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 BV430008 STRUCTURAL DYNAMICS ME4213 VIBRATION THEORY AND APPLICATIONS 12 4

16/17 SEM 2 MB402 PROJECT WORK 1 ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 - DESIGN AND DEVELOPMENT 1 ME3663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 - LIGHTWEIGHT DESIGN ME4661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 - RELIABILITY ME3663 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 10 CONTACT HOURS

16/17 SEM 2 - TOLERANCING (GD&T) ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 10 CONTACT HOURS16/17 SEM 2 - QUALITY AND PROJECT MANAGEMENT ME4662 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 - ECOLOGIC AND ECONOMIC DESIGN (ECO) ME3663 EXCHANGE TECHNICAL ELECTIVE 12 4

16/17 SEM 2 NIL0000 PRODUCT LIFE CYCLE MANAGEMENT ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 10 CONTACT HOURS16/17 SEM 2 MB6342 RENEWABLE ENERGY SOURCES AND CARRIERS ME3663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 ME401 CONTROL ENGINEERING ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MB603 PROJECT WORK 2 ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 - ADVANCED FLUID MECHANICS ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 - *SUSTAINABLE, EFFICIENT AND DECENTRALIZED ENERGY SYSTEMS 213/14 SEM 2 - *LABORATORY SUSTAINABLE ENERGY SYSTEMS 213/14 SEM 2 - DESIGN AND DEVELOPMENT METHODOLOGY 2 ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MB601 LASER MATERIAL AND PROCESSING 2 ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 55920 COMPUTATIONAL MECHANICS OF STRUCTURES ME4291 FINITE ELEMENT ANALYSIS 12 416/17 SEM 2 18640 NONLINEAR CONTROL ME4662 TECHNICAL ELECTIVE 12 416/17 SEM 2 51850 NETWORKED CONTROL SYSTEMS ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 39860 AIRCRAFT CONSTRUCTION 3 ME3102 MECHANICAL SYSTEM DESIGN II 11 413/14 SEM 2 46280 BASICS OF RAILWAYS ME4662 TECHNICAL ELECTIVE 12 413/14 SEM 2 21410 AEROSPACE ENGINEERING ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 14230 AUTOMATION AND INDUSTRIAL ROBOTS ME4663 TECHNICAL ELECTIVE 12 413/14 SEM 2 14070 BASICS OF THERMO TURBOMACHINES ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 14180 COMPUTATIONAL FLUID DYNAMICS ME4662 TECHNICAL ELECTIVE 12 413/14 SEM 2 13940 ENERGY AND ENVIRONMENT ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 14030 FUNDAMENTALS OF MICROELECTRONICS 6 ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 39960 NON DESTRUCTIVE TESTING ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 32290 VEHICLE TRANSMISSION SYSTEM ME4663 TECHNICAL ELECTIVE 12 413/14 SEM 2 30820 THERMAL TURBOMACHINERY ME3221 ENERGY CONVERSION PROCESSES 12 4

15/16 SEM 2 2170460 NUCLEAR POWER PLANT TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 2161224 MACHINE DYNAMICS ME3663 TECHNICAL ELECTIVE 12 4

UNIVERISTY OF STUTTGART

TECHNICAL UNIVERSITY OF MUNICH ME3661 TECHNICAL ELECTIVE

4

412

TECHNICAL ELECTIVEME4662 12

UNIVERSITY OF APPLIED SCIENCE, ESSLINGEN





15/16 SEM 2 2189921 NUCLEAR POWER AND REACTOR TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 2114856 VEHICLE RIDE COMFORT & ACOUSTICS I15/16 SEM 2 2114857 VEHICLE RIDE COMFORT & ACOUSTICS II15/16 SEM 2 2185000 MACHINERY AND PROCESSES ME3221 SUSTAINABLE ENERGY CONVERSION 12 4

16/17 SEM 2 MBE2016 ENGINEERING GRAPHICS ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 MBE2016 ENGINEERING GRAPHICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MBE2102 INTRODUCTION TO BIOMECHANICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MBE2034 ENGINERRING MATERIALS AND PROCESSING ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 AP4171 ELECTRONIC PACKAGING AND MATERIALS ME4661 EXCHANGE ELECTIVE 12 416/17 SEM 2 MBE3059 INTELLIGENT ROBOT DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 MBE4105 NUCLEAR REACTOR SAFETY ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MBE3059 INTELLIGENT ROBOT DESIGN ME3102 MECHANICAL SYSTEMS DESIGN II 11 415/16 SEM 2 MBE4011 INDUSTRIAL MECHATRONIC SYSTEMS ME3242 INDUSTRIAL AUTOMATION 12 415/16 SEM 2 AP2105 ENIGNEERING MECHANICS: DYNAMICS ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 MBE3050 DESIGN FOR MANUFACTURING SYSTEMS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MBE4046 GREEN INDUSTRIAL SYSTEMS ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 CA3791 COMPUTER AIDED DESIGN PRACTICES ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MBE3010 MECHANICAL DESIGN 3 ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 AP4171 ELECTRONIC PACKAGING AND MATERIALS ME4293 MICROELECTRONICS PACKAGING 12 414/15 SEM 2 MBE2034 ENGINEERING MATERIALS AND PROCESSING ME3162 MANUFACTURING PROCESSES 11 414/15 SEM 2 MBE4011 INDUSTRIAL MECHATRONIC SYSTEMS ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MBE4046 GREEN INDUSTRIAL SYSTEMS 3 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MBE4005 FINITE ELEMENT ANALYSIS 3 ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 AP3190 THERMODYNAMICS AOF MATERIALS ME3122 HEAT TRANSFER 11 413/14 SEM 2 MBE4032 ROBOTICS AND MACHINE VISION ME4245 ROBOT KINEMATICS,DYNAMICS AND CONTROL 12 413/14 SEM 2 MBE3112 ACTUATORS AND POWER ELECTRONICS 3 ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 MBE3050 DESIGN FOR MANUFACTURE ME3162 MANUFACTURING PROCESSES 11 413/14 SEM 2 MBE3049 CONTROL PRINCIPLES 3 ME2142 FEEDBACK CONTROL SYSTEMS 11 413/14 SEM 2 MBE3019 METROLOGY AND APPLICATIONS ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MBE4006 CONSUMER MECHATRONICS 3 ME4661 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 CSCI1510 COMPUTER PRINCIPLE & C PROG ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 CSCI1520 COMPUTER PRINCIPLES AND C++ PROGRAMMING ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 MAEG3030 FLUID MECHANICS ME2134 FLUID MECHANICS 1 11 415/16 SEM 2 MAEG3030 FLUID MECHANICS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MAE4010 COMPUTER-INTEGRATED MANUFACTURING 3 ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 MAEG4050 MODERN CONTROL SYSTEMS ANALYSIS AND DESIGN ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MAEG4060 VIRTUAL REALITY SYSTEMS AND APPLICATIONS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MAEG4030 HEAT TRANSFER ME3122 HEAT TRANSFER 11 414/15 SEM 2 MAEG3020 MANUFACTURING TECHNOLOGY 3 ME3162 MANUFACTURING PROCESSES 11 413/14 SEM 2 MAEG3100 ENERGY SYSTEMS ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MAEG3920 ENGINEERING DESIGN AND APPLICATIONS 3 ME3102 MECHANICAL SYSTEMS DESIGN II 11 413/14 SEM 2 MAEG4020 FINITE ELEMENT MODELLING AND ANALYSIS 3 ME4291 FINITE ELEMENT ANALYSIS 12 4

16/17 SEM 2 MECH3416 FUNDAMENTALS OF AERONAUTICAL ENGINEERING ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 *MECH4423 *BUILDING ENERGY MANAGEMENT AND CONTROL SYSTEMS ME3662 TECHNICAL ELECTIVE 12 4 TO COMPENSATE SHORTFALL OF 2.5 CONTACT HOURS16/17 SEM 2 *MECH3423 *BUILDING SERVICES ENGINEERING II ME3663 EXCHANGE TECHNICAL ELECTIVE 12 4 TO COMPENSATE SHORTFALL OF 2.5 CONTACT HOURS16/17 SEM 2 *MECH4412 *PRODUCT DESIGN AND DEVELOPMENT ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE SHORTFALL OF 20 CONTACT HOURS16/17 SEM 2 MECH4404 AUTOMATIC CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MECH4411 HEAT TRANSFER ME3122 HEAT TRANSFER 11 4

16/17 SEM 2 ME37004 FLIGHT MECHANICS AND CONTROL ME4241 AIRCRAFT PERFORMANCE AND STABI 12 416/17 SEM 2 ME45006 AIRCRAFT STRUCTURE AND ENGINEERING COMPOSITES ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME31003 SYSTEM DYNAMICS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 ME34004 FLUID MECHANICS ME2135 FLUID MECHANICS II 11 416/17 SEM 2 ME37003 FUNDAMENTALS OF AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 12 4

16/17 SEM 2 ME42006 *PRODUCT MODELING AND PROTOTYPING ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMEPENSATE FOR SHORTFALL OF 17 CONTACT HOURS

16/17 SEM 2 ME22002 *INTEGRATED PRODUCT DEVELOPMENT FUNDAMENTALS ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMEPENSATE FOR SHORTFALL OF 20 CONTACT HOURS

16/17 SEM 2 ME42007 *DESIGN FOR PRODUCT SAFETY AND RELIABILITY ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 15 CONTACT HOURS

16/17 SEM 2 ME23001 ENGINEERING MECHANICS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 ME42004 DEVELOPMENT OF GREEN PRODUCTS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 *ME32002 *ENGINEERING DESIGN FUNDAMENTALS ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 ME4409 ENGINE TECHNOLOGY ME4227 INTERNAL COMBUSTION ENGINES 12 416/17 SEM 2 ME4216 DESIGN OF AUTOMOTIVE MECHANICAL SYSTEMS ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 ME44001 AIR CONDITIONING FOR INDOOR THERMAL AND ENVIRONMENTAL QUALITY ME4223 THERMAL ENVIRONMENTAL ENGINEERING 12 415/16 SEM 2 ME44004 HEAT AND MASS TRANSFER 3 ME3122 HEAT TRANSFER 11 4

CITY UNIVERSITY OF HONG KONG

HONG KONG POLYTECHNIC UNIVERSITY

ME3662 TECHNICAL ELECTIVE 12

THE UNIVERSITY OF HONG KONG

4

KARLSRUHE INSTITUTE OF TECHNOLOGY

THE CHINESE UNIVERSITY OF HONG KONG





15/16 SEM 2 ME31001 DYNAMICS AND VIBRATIONS 3 ME3112 MECHANICS OF MACHINES 11 415/16 SEM 2 ME45006 AIRCRAFT STRUCTURE AND ENGINEERING COMPOSITES ME4212 AIRCRAFT STRUCTURES 12 415/16 SEM 2 ME47005 AIRCRAFT PERFORMANCE AND FLIGHT MANAGEMENT ME4241 AIRCRAFT PERFORMANCE, STABILITY AND CONTR12 415/16 SEM 2 ME42009 MANUFACTURING AND PROTOTYPING 3 ME3102 MECHANICAL SYSTEMS DESIGN II 11 415/16 SEM 2 ME41002 NOISE ABATEMENT AND CONTROL ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 ME41001 AUTOMATIC CONTROL SYSTEMS 3 ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 ME44002 ENGINE TECHNOLOGY 3 ME4227 INTERNAL COMBUSTION ENGINES 12 414/15 SEM 2 ME4502 AIRCRAFT SYSTEMS 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME4906 NUMERICAL METHODS FOR PRODUCT ANALYSIS ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME4308 AUTOMATIC CONTROL SYSTEMS 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME4216 DESIGN OF AUTOMOTIVE MECHANICAL SYSTEMS 3 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME4210 DESIGN FOR PACKAGING AND NO-ASSEMBLY 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME42005 CAD/CAE TECHNOLOGIES FOR PRODUCT DEVELOPMENT ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME4303 PRODUCT TESTING TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME4214 DESIGN FOR PRODUCT SAFETY ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME31002 LINEAR SYSTEMS AND CONTROLS 3 ME2142 FEEDBACK CONTROL SYSTEMS 11 414/15 SEM 2 ME3905 NUMERICAL METHODS 2 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 EE3051 SYSTEMS AND CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 413/14 SEM2 ME4505 FLIGHT MECHANICS AND AIRPLANE PERFORMANCE 3 ME4231 AERODYNAMICS AND PROPULSION 12 413/14 SEM 2 ME4411 AIRCONDITIONING FOR INDOOR THERMAL AND ENVIRONMENTAL QUALITY 3 ME4223 THERMAL ENVIRONMENTAL ENGINEERING 12 413/14 SEM 2 BSE2217 HEAT AND MASS TRANSFER 3 ME3122 HEAT TRANSFER 11 4

17/18 SEM 1 MECH1902 ENERGY SYSTEM FOR A SUSTAINABLE WORLD ME3663 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 1 MECH3420 ENGINEERING MATERIALS II ME3251 MATERIALS FOR ENGINEERS 12 417/18 SEM 1 MECH3510 COMPUTER-AIDED DESIGN AND MANUFACTURING ME3261 COMPUTER-AIDED DESIGN AND MFG 12 417/18 SEM 1 MECH3300 ENERGY CONVERSION ME3221 SUSTAINABLE ENERGYCONVERSION 12 416/17 SEM 2 MECH4740 NUMERICAL METHODS IN ENGINEERING ME4662 TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH4740 NUMERICAL METHODS IN ENGINEERING ME3663 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 *MECH3620 AIRCRAFT DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 7.5 CONTACT HOURS16/17 SEM 2 MECH3660 GAS TURBINES AND JET PROPULSION ME4231 AERODYNAMICS AND PROPULSION 12 416/17 SEM 2 ELEC3200 SYSTEM MODELING, ANALYSIS AND CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MECH3710 MANUFACTURING PROCESSES AND SYSTEMS ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 CENG3220 HEAT AND MASS TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 MECH1905 BUILDING FOR CONTEMPORARY LIVING ME3663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH2907 MECHATRONIC DESIGN AND PROTOTYPING ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MECH3020 MECHANICS OF SOLIDS II ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH3901 GREEN BUILDING TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH3650 AIRCRAFT STRUCTURE ME4212 AIRCRAFT STRUCTURES 12 416/17 SEM 2 MECH3520 DESIGN AND MANUFACTURING II ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 MECH5010 FOUNDATION OF SOLID MECHANICS ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MECH3670 AIRCRAFT PERFORMANCE AND STABILITY ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MECH4740 NUMERICAL METHODS IN ENGINEERING ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MECH3660 GAS TURBINES AND JET PROPULSION ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 *MECH4710 *INTRODUCTION TO ROBOTICS ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 *ELEC 1010 *ELECTRONIC AND INFORMATION TECHNOLOGY 3 ME4663 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH2520 DESIGN AND MANUFACTURING I 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH 4630 GAS TURBINES AND JET PROPULSION 3 ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH4720 INTRODUCTION TO PRECISION ENGINEERING ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH3830 LABORATORY ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH3630 ELECTRICAL TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH4620 AIRCRAFT STRUCTURE ME4212 AIRCRAFT STRUCTURES 11 414/15 SEM 2 MECH1901 AUTOMOTIVE ENGINEERING ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH3310 HEAT TRANSFER 3 ME3122 HAET TRANSFER 11 414/15 SEM 2 CIVL2510 FLUID MECHANICS 3 ME2134 FLUID MECHANICS I 11 414/15 SEM 2 MECH2310 THERMODYNAMICS ME2121 ENGINEERING THERMODYNAMICS 11 414/15 SEM 2 MECH3520 DESIGN AND MANUFACTURING II ME3101 MECHANICAL SYSTEM DESIGN I 11 414/15 SEM 2 MECH3610 CONTROL PRINCIPLES 3 ME2142 FEEDBACK CONTROL SYSTEMS 11 414/15 SEM 2 MECH2030 MECHANISMS AND DYNAMICS OF MACHINERY ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 MECH3710 MANUFACTURING PROCESSES AND SYSTEMS ME3102 MECHANICAL SYSTEMS DESIGN II 11 414/15 SEM 2 MECH3710 MANUFACTURING PROCESSES AND SYSTEMS ME3162 MANUFACTURING PROCESSES 11 414/15 SEM 2 MECH3030 MECHANISMS OF MACHINERY 3 ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 MECH4720 INTRODUCTION TO PRECISION ENGINEERING ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH3510 COMPUTER-AIDED DESIGN AND MANUFACTURING ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH4340 AIR CONDITIONING SYSTEMS ME4223 THERMAL ENVIRONMENTAL ENGINEERING 12 414/15 SEM 2 MECH3210 FLUID MECHANICS ME2134 FLUID MECHANICS I 11 414/15 SEM 2 MECH4430 MATERIALS CHARACTERIZATION ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH4010 MATERIALS FAILURE IN MECHANICAL APPLICATIONS ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH4450 INTRODUCTION TO FINITE ELEMENTS ANALYSIS 3 ME4291 FINITE ELEMENT ANALYSIS 12 414/15 SEM 2 MECH2907 MECHATRONIC DESIGN AND PROTOTYPING 3 ME3102 MECHANICAL SYSTEMS DESIGN II 11 414/15 SEM 2 MECH2520 DESIGN AND MANUFACTURING II ME3101 MECHANICAL SYSTEM DESIGN I 11 414/15 SEM 2 MECH4350 INDOOR AIR QUALITY IN BUILDINGS ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH3300 ENERGY CONVERSION ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH4340 AIR CONDITIONING SYSTEMS ME4662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECH3610 CONTROL PRINCIPLES ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MECH4010 MATERIALS FAILURE IN MECHANICAL APPLICATIONS 3 ME4255 MATERIAL FAILURE 12 4

HONG KONG UNIVERSITY OF SCIENCE AND TECHNOLOGY

HONG KONG





16/17 SEM 2 ME779 CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 *ME316 *KINEMATICS AND DYNAMICS OF MACHINES ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 EE302 CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 AE460 HEAT TRANSFER - AEROSPACE APPLICATIONS ME3122 HEAT TRANSFER 11 416/17 SEM 2 AE220 AEROSPACE STRUCTURAL MECHANICS ME4212 AIRCRAFT STRUCTURES 12 416/17 SEM 2 ME206 MANUFACTURING PROCESSES I ME3162 MANUFACTURING PROCESSES 11 415/16 SEM 2 AE332 AIRCRAFT DESIGN ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 AE330 AEROSPACE PROPULSION ME4661 TECHNICAL ELECTIVE 12 4

13/14 SEM 2 MEEN40200 ENERGY SYSTEMS IN BUILDINGS II 5 ME4223 THERMAL ENVIRONMENTAL ENGINEERING 12 413/14 SEM 2 MEEN40040 MATERIALS SCIENCE AND ENGINEERING III 5 ME3251 MATERIALS FOR ENGINEERING 11 413/14 SEM 2 MEEN30010 APPLIED DYNAMICS II ME4213 VIBRATION THEORY AND APPLICATIONS 11 4

15/16 SEM 2 81237 FINITE ELEMENT ANALYSIS AND CAE ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 80205 FINITE ELEMENT METHOD SIMULATION ME4291 FINITE ELEMENT ANALYSIS 12 4

16/17 SEM 2 - INDIVIDUAL RESEARCH TRAINING A ME3663 TECHNICAL ELECTIVE 12 415/16 SEM 2 - INDIVIDUAL RESEARCH TRAINING B ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 - *SEPARATION SCIENCE AND ENGINEERING 213/14 SEM 2 - *SCIENCE, TECHNOLOGY AND INDUSTRY OF JAPAN 213/14 SEM 2 - *MATERIALS SCIENCE AND ENGINEERING B 213/14 SEM 2 - *BIOTECHNOLOGY 2

16/17 SEM 2 08D1420 SIMULATION METHODS ME3291 NUMERICAL MTDS IN ENGINEERING 12 4

14/15 SEM 2 12360029 VIBRATION OF MECHANICAL SYSTEMS 2 ME4213 VIBRATION THEORY AND APPLICATIONS 12 414/15 SEM 2 12360040 NON-TRADITIONAL MACHINING 2 ME3661 TECHNICAL ELECTIVE 12 4

17/18 SEM 1 MECH300 CREATIVITY IN MACHINE DESIGN: A CAPSTONE DESIGN 3 ME3103 MECHANICAL SYSTEMS DESIGN 11 6 *SHORTFALL OF 1.5 CREDITS

17/18 SEM 1 IE321 PRODUCTION MANAGEMENT I ME3662 TECHNICAL ELECTIVE 12 4

17/18 SEM 1 CE202 STRUCTURAL MECHANICS ME2112 STRENGTH OF MATERIALS 11 3IF STUDENT HAS NOT TAKEN EG1109M STATICS AND MECHANICS OF MATERIALS.

17/18 SEM 1 ME453 INTRODUCTION TO ROBOTICS ENGINEERING 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MAE400 CAPSTONE DESIGN I 3 ME3102 MECHANICAL SYSTEMS DESIGN II 11 414/15 SEM 2 MAE552 INTRODUCTION TO ACOUSTICS ME3661 TEACHNICAL ELECTIVE 12 4

16/17 SEM 2 AMSE464 PHYSICAL PROPERTIES OF POLYMERS ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 AMSE501 ADVANCED THERMODYNAMICS OF MATERIALS ME3995 TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH371 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 MECH541 MECHANICS OF COMPOSITE MATERIALS ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH323 SYSTEMS CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MECH579 INTRO TO MICROFLUIDS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH678 FLOW VISUALISATION ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MECH450 APPLIED THERMAL ENGINEERING ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MECH471 AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 12 415/16 SEM 2 ADMS568 NANO BIOMATERIALS ME4253 BIOMATERIALS ENGINEERING 12 413/14 SEM 2 MECH441 METAL FORMING 3 ME4661 TECHNICAL ELECTIVE 12 4

13/14 SEM 2 EECE565 ROBOTICS ME4245 ROBOTS KINEMATICS, DYNAMICS AND CONTORL 12 413/14 SEM 2 MECH433 SYSTEMS DESIGN II 3 ME3102 MECHANICAL SYSTEMS DESIGN II 11 413/14 SEM 2 MECH311 MECHANICAL VIBRATIONS 3 ME4213 VIBRATIONS THEORY & APPLICATIONS 12 413/14 SEM 2 MEIE583 INTRO TO FINITE ELEMENT METHOD ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 2 MECH330 MATERIALS PROCESSING 3 ME3162 MANUFACTURING PROCESSES 11 4

13/14 SEM 2 MECH439 INTRODUCTION TO ROBOTICS ME4245 ROBOTS KINEMATICS, DYNAMICS AND CONTORL 12 4

13/14 SEM 2 MECH686 COMPUTATIONAL FLUID MECHANICS ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

12

ME3662 TECHNICAL ELECTIVE 12

TECHNICAL ELECTIVE

TOHOKU UNIVERSITY

INDIAN INSTITUTE OF TECHNOLOGY (MADRAS)

OSAKA UNIVERSITY

4

4

INDIAN INSTITUTE OF TECHNOLOGY (BOMBAY)

ME3661

INDIA

UNIVERSITY OF TOKYO

UNIVERSITY COLLEGE DUBLIN, IRELAND IRELAND

KOREA

KOREAN ADVANCE INSTITUTE OF SCIENCE & TECHNOLOGY (KAIST)

KYOTO INSTITUTE OF TECHNOLOGY

POHANG UNIVERSITY OF SCIENCE AND TECHNOLOGY

KOREA UNIVERSITY

JAPAN





16/17 SEM 2 NILM2794.0040 MICRO-NANO MECHANICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 NILM2794.00017 MECHANICAL PRODUCT DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE 1.26 CONTACT HOURS16/17 SEM 2 ZXX4582.503 FUNCTIONAL POLYMER NANOMATERIALS ME4661 TECHNICAL ELECTIVE 12 416/17 SEM 2 M2794.00200 APPLIED FLUID MECHANICS ME2135 FLUID MECHANICS II 11 416/17 SEM 2 M2794.00270 INTRODUCTION TO ROBOTICS ME4245 ROBOT MECHANICS AND CONTROL 12 416/17 SEM 2 ZXX458.305 PROCESS FLUID MECHANICS ME2135 FLUID MECHANICS II 11 416/17 SEM 2 409.330 SYSTEMS ENGINEERING THERMODYNAMICS ME3221 ENERGY CONVERSION PROCESSES 12 416/17 SEM 2 M2794.008600 INVISCID FLOW ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 M2795.006500 AIR BREATHING PROPULSION THEORY ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 457.206 SOIL MECHANICS ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 M2795.002600 PRINCIPLES OF FLIGHT VEHICLE CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 415/16 SEM 2 M2795.004300 ROCKET PROPULSION ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 M2795.00400 HIGH ENERGY THERMOFLUID DYNAMICS ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 M2794.002600 HEAT TRANSFER ME3122 HEAT TRANSFER 11 415/16 SEM 2 406.436 MANUFACTURING PROCESS DESIGN FOR INDUSTRIAL ENGINEERS ME3162 MANUFACTURING PROCESSES 11 415/16 SEM 2 M2794.012000 MECHANICAL STRENGTHS AND BEHAVIORS OF SOLIDS ME4255 MATERIAL FAILURE 12 414/15 SEM 2 M2794.007300 FINITE ELEMENT ANALYSIS ME4291 FINITE ELEMENT ANALYSIS 12 414/15 SEM 2 400.505 INTRODUCTION TO THE FINITE ELEMENT METHOD ME4291 FINITE ELEMENT ANALYSIS 12 414/15 SEM 2 M2794.003000 COMPUTER SIMULATION & DESIGN ME4291 FINITE ELEMENT ANALYSIS 12 414/15 SEM 2 ME446.632 CONTROL SYSTEM I ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 M2795.002600 PRINCIPLES OF FLIGHT VEHICLE CONTROL ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 446.781 DECISION MAKING FOR AUTONOMOUS AEROSPACE SYSTEMS ME3661 TECHNICAL ELECTIVE 12 4

14/15 SEM 2 446.542 COMPUTATIONAL FLUID MECHANICS ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

13/14 SEM 2 406.752 VEHICLE ERGONOMICS 3 ME4661 TECHNICAL ELECTIVE 4 12 4

13/14 SEM 2 446.345 INTRODUCTION TO ROBOTICS 3 ME4245 ROBOT KINEMATICS, DYNAMICS AND CONTROL 11 413/14 SEM 2 446.482 DESIGN, MANUFACTURING PROCESS AND LABORATORY 3 ME3102 MECHANICAL SYSTEMS DESIGN II 11 4

15/16 SEM 2 DAA3250 CHEM ENG THERMODYNAMICS I ME3221 SUSTAINABLE ENERGY CONVERSION 12 4

13/14 SEM 2 - NON-STADANRD SOURCES OF ENERGY ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 - MECHANICS OF COMPOSITE MATERIALS 4.5 ME3211 MECHANICS OF SOLIDS 12 413/14 SEM 2 - ROTARY MACHINES 4.5 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 - VIBROTECHNOLOGY AND VIBROMACHINES 6.0 ME4213 VIBRATION THEORY AND APPLICATION 12 413/14 SEM 2 - FRACTURE THEORY 4.5 ME4663 TECHNICAL ELECTIVE 12 413/14 SEM 2 - MECHANICS OF COMPOSITE MATERIALS 4.5 ME3662 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 IN3047 LEAN SIX SIGMA METHODOLOGY ME3663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 IN2025 PROJECT EVALUATION AND MANAGEMENT ME3663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 IN2028 KNOWLEDGE SYSTEMS IN ORGANISATIONS ME3663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 IN2030 MANUFACTURING MODELS ME3663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 M2025 NUMERICAL METHODS IN ENGINEERING ME3291 NUMERICAL METHODS IN ENGINEERING 12 416/17 SEM 2 MR2004 CONTROL ENGINEERING ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 M1005 DYNAMICS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 M3017 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 M2028 MATERIALS TECHNOLOGY ME3251 MATERIALS FOR ENGINEERS 12 4

16/17 SEM 2 AE3212-I AEROSPACE FLIGHT DYNAMICS & SIMULATION, INCLUDING FLIGHT TEST ME4241 AIRCRAFT PERFORMANCE AND STABILITY 12 416/17 SEM 2 ME46115 COMPLIANT MECHANISMS ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 BM41070 MEDICAL DEVICE PROTOTYPING ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MT218 MECHATRONICS IN MT ME2143 SENSORS & ACTUATORS 11 416/17 SEM 2 WB2436-12 BIO INSPIRED DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 6

16/17 SEM 2 *WB1428-3 *COMPUTATIONAL FLUID DYNAMICS ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

16/17 SEM 2 ME41055 MULTIBODY DYNAMICS B ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 AE1130-II DYNAMICS ME3112 MECHANICS OF MACHINES 11 4

16/17 SEM 2 AE2220-II COMPUTATIONAL MODELLING ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

16/17 SEM 2 AE2235-I AEROSPACE SYSTEMS & CONTROL THEORY ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 AE1222-I DESIGN & CONSTRUCTION ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 WB1418-07 ENGINEERING DYNAMICS ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 *WB4300B-13 *FLUID MACHINERY 314/15 SEM 2 ME1615 *MICRO-ASSEMBLY, PACKAGING AND TEST 315/16 SEM 2 *ME1120 *SPACE ROBOTICS ME3661 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 *ME1640 *MICRO- & NANOSYSTEMS DESIGN & FABRICATION, INCL. MEMS LAB ME3281 MICROSYSTEMS DESIGN AND APPLICATIONS 12 4

412TECHNICAL ELECTIVEME4661

SEOUL NATIONAL UNIVERSITY

RIGA TECHNICAL UNIVERSITY LATVIA

YONSEI UNIVERSITY

INST TECN Y DE ESTUDIOS SUPERIORES DE MONTERREYMEXICO





15/16 SEM 2 *ME1612-10 *INTRO TO NANOSCIENCE AND TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 *ME1130 *ROBOTICS PRACTICAL ME3662 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 *SC4045 *CONTROL FOR HIGH RESOLUTION IMAGING TECHNICAL ELECTIVE ME3663 TECHNICAL ELECTIVE 12 415/16 SEM 2 *WB1450-05 *MECHANICAL ANALYSIS FOR ENGINEERING ME4661 ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 *WI4062TU *TRANSPORT, ROUTING AND SCHEDULING ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 *WB1418-07 *ENGINEERING DYNAMICS ME4213 VIBRATION THEORY AND APPLICATIONS 12 4

15/16 SEM 2 *ME1100 *AUTOMATED DRIVING, AUTOMOTIVE HUMAN FACTORS AND SAFETY ME4264 AUTOMOBILE DESIGN & ENGINEERING 12 414/15 SEM 2 *WB4300B-13 *FLUID MACHINERY14/15 SEM 2 *OE4680 *ARCTIC ENGINEERING14/15 SEM 2 WB4408A DIESEL ENGINES A 4 ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 *AE4W21-14 *WIND TURBINE AEROELASTICITY14/15 SEM 2 *WB1406-07 *EXPERIMENTAL DYNAMICS14/15 SEM 2 OE4653 MARINE PIPELINES 4 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME1306 MATERIALS AT HIGH TEMPERATURE 5 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 CIE4140 STRUCTURAL DYNAMICS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 WB4408B DIESEL ENGINES B14/15 SEM 2 WB4408A DIESEL ENGINES A 414/15 SEM 2 WB2436-12 BIO INSPIRED DESIGN 4 ME3102 MECHANICAL SYSTEMS DESIGN II 11 414/15 SEM 2 WB4402 PROJECT ENGINEERING ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 *AE4AS506 AEROELASTICITY ME4235 INTRODUCTION TO AEROELASTICITY 12 414/15 SEM 2 CIE5123 INTRODUCTION TO FINITE ELEMENT METHOD ME4291 FINITE ELEMENT ANALYSIS 12 414/15 SEM 2 *MT816 COMPOSITE MATERIALS 14/15 SEM 2 *ME1120 SPACE ROBOTICS14/15 SEM 2 WB4422-11 THERMAL POWER PLANTS 6 ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 *WB1440 ENG. OPTIMIZATION: CONCEPT & APPLICATIONS 14/15 SEM 2 *WB1441 ENGINEERING OPTIMIZATION 214/15 SEM 2 BM1101 BIOMATERIALS ME4253 BIOMATERIALS ENGINEERING 12 4

16/17 SEM 2 4RM00 INTRODUCTION TO COMPUTATIONAL FLUID DYNAMICS ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 16.38 CONTACT HOURS

16/17 SEM 2 4GB20 PROJECT (ROBOT ARM) ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 4EC10 DYNAMICS OF ENERGY SYSTEM ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 4LB00 STRENGTH AND STRUCTURE ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 5XWD0 PROJECT "ENERGY MANAGEMENT IN HYBRID VEHICLES" ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 4LB00 STRENGTH AND STRUCTURE ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 4BM10 HYDRAULIC TURBOMACHINES ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 DAB311 CARDBOARD MODELLING ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 4EM20 ENERGY CONVERSION SYSTEMS ME3221 SUSTAINABLE ENERGY CONVERSION 12 415/16 SEM 2 4J400 MULTIBODY DYNAMICS ME3112 MECHANICS OF MACHINES 11 415/16 SEM 2 4GB20 PROJECT (ROBOT ARM) ME3102 MECHANICAL SYSTEMS II 11 415/16 SEM 2 4EM60 ADVANCED DISCRETIZATION TECHNIQUES ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 4CC10 MECHATRONICS DESIGN ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 4EM30 SCIENTIFIC COMPUTING FOR MECHANICAL ENGINEERING ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 4AUB0 INTRODUCTION VEHICLE DYNAMICS AND POWERTRAINS ME4214 VEHICLE DYNAMICS 12 415/16 SEM 2 2WN12 APPLIED FINITE ELEMENTS ME4291 FINITE ELEMENT ANALYSIS 12 4

15/16 SEM 2 4DC00 DYNAMICS AND CONTROL OF ROBOTIC SYSTEMS 5 ME4245 ROBOT KINEMATICS, DYNAMICS AND CONTROL 12 4

14/15 SEM 2 6E8X0 DYNAMICS AND PROCESS CONTROL 5 ME2142 FEEDBACK CONTROL SYSTEMS 11 414/15 SEM 2 5ESB0 SYSTEMS 5 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 OHV20 PERCEPTION AND MOTOR CONTROL 5 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 *4H300 *DEFORMATION AND FAILURE OF MATERIALS 313/14 SEM 2 *4T400 *STOCHASTIC MODELS OF MANUFACTURING SYSTEMS 3

14/15 SEM 2 ENME406 ENGINEERING PRODUCT DESIGN AND ANALYSIS ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 *ENGR403 FIRE ENGINEERING 15 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 ENGR401 COMPUTATIONAL FLUID DYNAMICS 15 ME4233 COMPUTATIONAL METHODS IN FLUID MECHANICS 12 414/15 SEM 2 ENME303 CONTROLS AND VIBRATIONS 15 ME2142 FEEDBACK CONTROL SYSTEMS 11 4

15/16 SEM 2 MECHENG 334 ENGINEERING DESIGN 3M ME3102 MECHANICAL SYSTEMS DESIGN II 11 414/15 SEM 2 MECHENG 334 ENGINEERING DESIGN 3M ME3101 MECHANICAL SYSTEMS DESIGN I 11 414/15 SEM 2 MECHENG743 COMPOSITE MATERIALS ME4662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECHENG722 ENGINEERING VIBRATIONS ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECHENG713 ENERGY TECHNOLOGY 15 ME3221 ENERGY CONVERSION PROCESSES 12 414/15 SEM 2 MECHENG712 AEROHYDRODYNAMICS 15 ME4231 AERODYNAMICS AND PROPULSION 12 4

16/17 SEM 2 - MACHINE DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 - REGRIGERATION AND AC PLANTS ME4223 THERMAL ENVIRONMENTAL ENGRG 12 416/17 SEM 2 - THERMAL POWER ENGINEERING ME3221 SUSTAINABLE ENERGY CONVERSION 12 414/15 SEM 2 - ENVIRONMENT PROTECTION 6 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 - ADVANCED STRUCTURAL MATERIALS ME3251 MATERIALS FOR ENGINEERS 12 414/15 SEM 2 - INTRODUCTION TO AUTOMATION ME2142 FEEDBACK CONTROL SYSTEMS 11 413/14 SEM 2 - HYDRAULIC AND PNEUMATIC DRIVE AND CONTROL ME4661 TECHNICAL ELECTIVE 12 4

ME3661

ME3661

ME4227

ME3661

4

12

12

12

12

12

INTERNAL COMBUSTION ENGINE

TECHNICAL ELECTIVE

TECHNICAL ELECTIVE

TECHNICAL ELECTIVE

4

4

4

TECHNICAL ELECTIVE

NETHERLANDS

UNIVERSITY OF CANTERBURY

12 4

ME4661 TECHNICAL ELECTIVE 4 4

DELFT UNIVERSITY OF TECHNOLOGY

UNIVERSITY OF AUCKLAND

AGH UNIVERSITY OF SCIENCE & TECHNOLOGY

NEW ZEALAND

CRACOW UNIVERSITY OF TECHNOLOGY

EINDHOVEN UNIVERSITY OF TECHNOLOGY

ME3662





13/14 SEM 2 - ADVANCED CNC MACHINE TOOLS PROGRAMMING WITH CAD/CAM CATIA 6 ME3261 CAD AND MANUFACTURING 12 413/14 SEM 2 - HEAT TRNASFER 6 ME3122 HEAT TRANSFER 11 413/14 SEM 2 - COMBUSTION ENGINES 6 ME4227 INTERNAL COMBUSTION ENGINE 12 413/14 SEM 2 - INTRODUCTION TO ENGINEERING APPLICATION OF FEM 6 ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 2 - MECHANICS OF COMPOSITE MATERIALS 6 ME3661 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 ANK443 ENERGY MANAGEMENT15/16 SEM 2 ANK472 MECHANICS OF FLIGHT15/16 SEM 2 - AUTOMATION ME2142 FEEDBACK CONTROL SYSTEMS 11 415/16 SEM 2 EDYCO DYNAMIC SYSTEMS AND CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 415/16 SEM 2 *ANK468 *ASTRONAUTICS 4 ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 *ANK400 *MANUFACTURING TECHNOLOGY 215/16 SEM 2 *ANK380 *COMBUSTION AND FUELS15/16 SEM 2 ANS534 ADVANCED RENEWABLE ENERGY SOURCES ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 ANK425 HEAT TRANSFER IN AEROSPACE ME3122 HEAT TRANSFER 11 414/15 SEM 2 ML.ANW116 THERMODYNAMICS 1 5 ME2121 THERMODYNAMICS 11 314/15 SEM 2 *ANK341 *FLUID MECHANICS 3 214/15 SEM 2 *ANK473 AERODYNAMICS 1 2

16/17 SEM 2 MA3003 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 MA4001 ENGINEERING DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MA3005 CONTROL THEORY ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MA4001 ENGINEERING DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 6

16/17 SEM 1 MA4814 COMPUTATIONAL FLUID DYNAMICS ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

16/17 SEM 1 MA3701 AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 12 416/17 SEM 1 MA3700 AIRCRAFT STRUCTURES I ME4212 AIRCRAFT STRUCTURES 12 416/17 SEM 1 MA4705 AIRCRAFT NAVIGATION AND FLIGHT COMPUTERS ME4661 TECHNICAL ELECTIVE 12 416/17 SEM 1 MA2701 FLIGHT PERFORMANCE16/17 SEM 1 MA3703 FLIGHT DYNAMICS15/16 SEM 2 MA4837 NET SHAPE MANUFACTURING ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 MA4845 MANUFACTURING AUTOMATION ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MA4801 FINITE ELEMENT METHOD ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 2 MP4005 FLUID DYNAMICS 3 ME2135 FLUID MECHANICS II 11 413/14 SEM 2 MA2002 THEORY OF MECHANISM 3 ME3112 MECHANICS OF MACHINES 11 4

13/14 SEM 2 MA4825 ROBOTICS ME4245 ROBOT KINEMATICS, DYNAMICS AND CONTROL 12 4

13/14 SEM 2 EE4268 ROBOTICS AND AUTOMATION ME4245 ROBOT KINEMATICS, DYNAMICS AND CONTROL 12 4

16/17 SEM 216/17 SEM 2 MECE08009 DYNAMICS 2 ME3112 MECHANICS OF MACHINE 11 416/17 SEM 2 SCEE09002 CONTROL AND INSTRUMENTATION ENGINEERING 3 ME2142 FEEDBACK CONTROL SYSTEMS 11 415/16 SEM 2 *CIVE09031 *INFRASTRUCTURE AND TRANSPORT 315/16 SEM 2 *SCEE08008 *POWER ENGINEERING 215/16 SEM 2 MECE10009 POLYMERS AND COMPOSITE MATERIALS 4 ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 CIVE09023 FIRE SAFETY ENGINEERING 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 MECE09013 MANUFACTURING TECHNOLOGY 3 ME3162 MANUFACTURING PROCESSES 11 414/15 SEM 2 MECE09008 DYNAMICS 3 ME4213 VIBRATION THEORY AND APPLICATIONS 12 4

16/17 SEM 2 31423965 CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS16/17 SEM 2 33928326 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 14400324 FLOW THEORY AND PIPE FLOW ME2135 FLUID MECHANICS II 11 416/17 SEM 2 20753224 DYNAMICS OF RIGID BODIES ME3112 MECHANICS OF MACHINES 11 4

14/15 SEM 2 MEN-031 COMBUSTION ENGINEERING ME4227 INTERNAL COMBUSTION ENGINE 12 414/15 SEM 2 MTF114 HEAT TRANSFER ME3122 HEAT TRANSFER 11 413/14 SEM 2 MEN115 ENERGY SYSTEMS MODELING & PLANNING 7.5 ME4663 TECHNICAL ELECTIVE 12 413/14 SEM 2 MTF270 TURBULENCE MODELING 7.5 ME4662 TECHNICAL ELECTIVE 12 413/14 SEM 2 SSY261 APPLIED MECHATRONICS DESIGN ME4661 TECHNICAL ELECTIVE 12 4

16/17/ SEM 2 TMMV56 AERODYNAMICS, CONTINUES COURSE ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TNG208 AUTOMATIC CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 4

TMAL51 CONCEPTUAL AIRCRAFT DESIGNTMAL06 AIRCRAFT CONCEPTUAL DESIGN - PROJECT COURSE

16/17 SEM 2 TFYA85 ALTERNATIVE ENERGY SOURCES AND THEIR APPLICATIONS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMHL61 DAMAGE MECHANICS AND LIFE ANALYSIS ME3663 TECHNICAL ELECTIVE 12 4

4

SOUTH AFRICA STELLENBOSCH UNIVERSITY


4

TECHNICAL ELECTIVE 12 4

AIRCRAFT PERFORMANCE AND STABILITY 12

UNIVERSITY OF EDINBURGH

CHALMERS UNIVERISTY OF TECHNOLOGY

COMPRESSIBLE FLOW

ME4661

ME4241 4

ME3661

SCOTLAND

NANYANG TECHNOLOGICAL UNIVERSITY (NTU)SINGAPORE

POLAND

WARSAW UNIVERSITY OF TECHNOLOGY

16/17 SEM 2 ME3103 MECHANICAL SYSTEMS DESIGN 11 6

TECHNICAL ELECTIVE 12 4ME3663

ME3232 12





16/17 SEM 2 TMHL41 CONTINUUM MECHANICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMHL62 THE FINITE ELEMENT METHOD; ADVANCED COURSE ME4291 FINITE ELEMENT ANALYSIS 12 416/17 SEM 2 TMHL63 INTRODUCTION TO COMPUTATIONAL MECHANICS ME4662 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMES17 BUILDING ENERGY SYSTEMS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMKM09 ENGINEERING MATERIALS FOR LIGHTWEIGHT APPLICATIONS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMKM40 ENGINEERING MATERIALS - NEW MATERIALS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMMS10 FLUID POWER SYSTEMS AND TRANSMISSIONS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TSFS03 VEHICLE PROPULSION SYSTEMS ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 TMKM18 ENGINEERING MATERIALS, WELDING AND MANUFACTURING TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 TPPE54 ADVANCED PLANNING AND SCHEDULING ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMHL61 DAMAGE MECHANICS AND LIFE ANALYSIS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMME11 ROAD VEHICLE DYNAMICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 TMMV01 AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 12 4

16/17 SEM 2 TMMV07 COMPUTATIONAL FLUID MECHANICS, ADVANCED COURSE ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

16/17 SEM 2 TMMV56 AERODYNAMICS, CONTINUES COURSE ME4231 AERODYNAMICS AND PROPULSION 12 416/17 SEM 2 TMAL06 AIRCRAFT CONCEPTUAL DESIGN ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 TMKM40 ENGINEERING MATERIALS - NEW MATERIALS ME4663 TECHNICAL ELECTIVE 12 415/16 SEM 2 TMAL06 AIRCRAFT CONCEPTUAL DESIGN - PROJECT COURSE ME3101 MECHANICAL SYSTEMS DESIGN I 11 415/16 SEM 2 TMHL62 THE FINITE ELEMENT METHOD; ADVANCED COURSE ME4291 FINITE ELEMENT ANALYSIS 12 4

15/16 SEM 2 TMMV08 COMPUTATIONAL FLUID DYNAMICS ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

15/16 SEM 2 TMMS30 MULTI BODY DYNAMICS AND ROBOTICS ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 TMMS21 MECHATRONICS 6 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 TMES17 BUILDING ENERGY SYSTEMS 6 ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 TPMM06 ANALYSING AND IMPROVING MANUFACTURING OPERATIONS 6 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 - DESIGN OPTIMIZATION 6 ME4662 TECHNICAL ELECTIVE 12 413/14 SEM 2 TMPS27 PRODUCTION SYSTEMS 6 ME3662 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 FRTN25 AUTOMATIC PROCESS CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MMV031 HEAT TRNASFER ME3122 HEAT TRANSFER 11 414/15 SEM 2 FMEN02 MULTIBODY DYNAMICS 7.5 ME3112 MECHANICS OF MACHINES 11 413/14 SEM 2 MMK135 TURBULENT COMBUSTION ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 FHLN10 MODERN EXPERIMENTAL MECHANICS ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 FHL090 FRACTURE MECHANICS, ADVANCED COURSE ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 FRTN20 MARKET DRIVEN SYSTEMS 4 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MMTF05 PRODUCTION AND MATERIALS 5 ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MMKN20 DESIGN IN THERMOPLASTIC MATERIALS ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 FKMN10 HIGHT TEMPERATURE MATERIALS ME4662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MVK160 HEAT AND MASS TRANSFER 9 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MVKN45 APPLIED COMPUTATIONAL FLUID MECHANICS 7.5 ME4233 COMPUTATIONAL METHODS IN FLUIDS MECHANIC 12 413/14 SEM 2 FMEN01 MULTIBODY DYNAMICS 8 ME4213 VIBRATION THEORY AND APPLICATION 12 413/14 SEM 2 FMEN15 ANALYTICAL MECHANICS ME4213 VIBRATION THEORY AND APPLICATION 12 4

16/17 SEM 2 MF2020 PROJECT WORK ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 SF2561 THE FINITE ELEMENT METHOD ME4291 FINITE ELEMENT ANALYSIS 12 416/17 SEM 2 AK1213 SWEDISH SOCIETY, CULTURE AND INDUSTRY IN HISTORICAL ME3991 EXCHANGE ELECTIVE 1 12 416/17 SEM 2 EI2430 HIGH-VOLTAGE ENGINEERING ME3991 EXCHANGE ELECTIVE 1 12 416/17 SEM 2 MJ2412 RENEWABLE ENERGY TECHNOLOGY, ADVANCED COURSE ME3663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 MG2040 *ASSEMBLY TECHNOLOGY ME3663 EXCHANGE TECHNICAL ELECTIVE 12 4 3016/17 SEM 2 MJ2500 *LARGE SCALE SOLAR POWER ME3663 EXCHANGE TECHNICAL ELECTIVE 12 415/16 SEM 2 MF2023 INDUSTRIAL DESIGN ME3102 MECHANICAL SYSTEMS DESIGN II 11 415/16 SEM 2 41742 INTRODUCTION TO MICRO MECHANICAL SYSTEMS DESIGN AND MANUFACTURE ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 SE2134 DYNAMIC PROBLEMS IN SOLID MECHANICS ME3112 MECHANICS OF MACHINES 11 415/16 SEM 2 *MJ2246 *ROCKET PROPULSION ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 SG2215 COMPRESSIBLE FLOW ME3232 COMPRESSIBLE FLOW 12 413/14 SEM 2 MG2020 MODULARISATION OF PRODUCTS 6 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MF2031 ADVANCED PROTOTYPING ME4661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MG2103 INDUSTRIAL PROCESS ENGINEERING ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 MH2300 FUNCTIONAL MATERIALS ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MG2033 QUALITY CONTROL ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MJ2424 COMPUTATIONAL METHODS IN ENERGY TECHNOLOGY ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 MF2018 TRIBOLOGY 6 ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 MH2037 CREAMICS ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 AF2024 FINITE ELEMENT METHODS IN ANALYSIS AND DESIGN ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 2 SG2212 COMPUTATIONAL FLUID DYNAMICS ME4233 COMPUTATIONAL METHODS IN FLUID MECHANICS 12 413/14 SEM 2 SE2134 DYNAMIC PROBLEMS IN SOLID MECHANICS ME4211 APPLIED MECHANICS 12 416/17 SEM 2 1GV114 WIND POWER BASICS ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 *1TE061 *INDUSTRIAL PROJECT MANAGEMENT ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 1TE012 INNOVATION MANAGEMENT, ENTREPRENEURSHIP AND IPR ME3661 TECHNICAL ELECTIVE 12 4

UPPSALA UNIVERSITY

ROYAL INSTITUTE OF TECHNOLOGY STOCKHOLM, KTH

LINKOPING UNIVERSITY

LUND UNIVERSITY

ETH, ZURICH

SWEDEN





16/17 SEM 2 1510261 THERMODYNAMICS III ME3221 SUSTAINABLE ENERGY CONVERSION 12 4

16/17 SEM 2 1510182 FUNDAMENTALS OF CFD METHODS ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

16/17 SEM 2 MICRO565 FUNDAMENTALS AND PROCESSES FOR PHOTOVOLTAIC DEVICES ME3663 TECHNICAL ELECTIVE 12 4SHORTFALL OF 2.38 CONTACT HOURS TO BE COMPENSATED FROM OTHER MODULE

16/17 SEM 2 MICRO530 NANOTECHNOLOGY ME3663 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME 343 COMPRESSIBLE-FLUID DYNAMICS ME3232 COMPRESSIBLE FLOW 12 416/17 SEM 2 ME 454 MODELLING AND OPTIMIZATION OF ENERGY SYSTEMS ME3663 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME 417 COMPUTER-AIDED DESIGN AND MANUFACTURING ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME 460 RENEWABLE ENERGY ME4662 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME 415 METHODS FAR RAPID PRODUCTION AND DEVELOPMENT ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 ME-516 LIFECYCLE ECONOMIC AND ENVIRONMENTAL PERFORMANCE OF PRODUCT SYSTE ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 ME452 ENERGY CONVERSION 3 ME3221 ENERGY CONVERSION PROCESSES 12 413/14 SEM 2 MSE-464 ASSEMBLY TECHNIQUES 2 ME3663 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 F041000 ENERGY SAVINGS IN BUILDING ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 IBPE3109E SOLAR THERMAL ENERGY ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 F031400 BIOENERGY ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 N157800 THEORY OF COBUSTION ME4663 TECHNICAL ELECTIVE 12 415/16 SEM 2 P556800 GREEN ENERGY TECHNOLOGY ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 F031200 HEAT TRANSFER ME3122 HEAT TRANSFER 11 415/16 SEM 2 P180600 OCEAN RENEWABLE ENERGY ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 IBPE2111E HEAT ENGINE ME4227 INTERNAL COMBUSTION ENGINES 12 4

15/16 SEM 2 F012000 ENGINEERING MATERIAL SCIENCE ME2151PRINCIPLES OF MECHANICAL ENGINEERING MATERIALS 11 4

16/17 SEM 2 10520ESS325000 FEEDBACK CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 IME6520 MECHANICS OF COMPOSITE MATERIALS ME3211 MECHANICS OF SOLIDS 12 41617 SEM 2 IME5317 MICRO/NANO SCALE ENERGY TRANSPORT ME3663 EXCHANGE TECHNICAL ELECTIVE 12 4

1617 SEM 2 IME5324 THE OBJECTIVE OF THIS LECTURE IS TO PROVIDE OVERVIEW OF THE HVAC&R SYSTEM, INCLUDING COMPONENTS A ME4223 THERMAL ENVIRONMENTAL ENGRG 12 4

1617 SEM 2 DME3310 ENERGY TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 IME5324 REFRIGERATION AND AIR-CONDITIONING ENGINEERING ME4223 THERMAL ENVIRONMENTAL ENGRG 12 416/17 SEM 2 IME5520 HEAT CONVECTION ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 IME5598 DIGITAL CONTROL SYSTEM ME4246 LINEAR SYSTEMS 12 416/17 SEM 2 DME4611 AUTOMATIC CONTROL (II) ME2142 FEEDBACK CONTROL SYSTEMS 11 4

16/17 SEM 2 ME3604301 AUTOMATIC CONTROL (1) ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 ME3214301 MECHANICAL SYSTEM AND DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 ME4104301 MECHANISMS AND DYNAMICS OF MACHINERY ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 ME3705301 HEAT TRANSFER ME3122 HEAT TRANSFER 11 415/16 SEM 2 ME4701701 POWER PLANT ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME4405 CORROSION AND CORROSION CONTROL 3 ME4991 TECHNICAL ELECTIVE (OOGT) 12 413/14 SEM 2 ME3210701 INTRODUCTION TO COMPUTER-AIDED STRUCTURAL ANALYSIS 3 ME3663 TECHNICAL ELECTIVE 12 413/14 SEM 2 ME4415701 INTRODUCTION TO BATTERIES 3 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 ME4711701 INTRODUCTION TO ENERGY SOURCES 3 ME3662 TECHNICAL ELECTIVE 12 4

14/15 SEM 2 IEEM536600 MANUFACTURING SYSTEMS AND AUTOMATION 3 ME4262 AUTOMATION IN MANUFACTURING 12 414/15 SEM 2 PME511200 GAS PHASE DYNAMICS ME3232 COMPRESSIBLE FLOW 12 414/15 SEM 2 PME443200 COMPUTER AIDED DESIGN AND MANUFACTURING ME3261 COMPUTER-AIDED DESIGN AND MANUFACTURING 12 414/15 SEM 2 PME 334700 INTRODUCTION TO FINITE ELEMENTS METHODS ME4291 FINITE ELEMENT ANALYSIS 12 414/15 SEM 2 PME 312000 HEAT AND MASS TRANSFER 3 ME3122 HEAT TRANSFER 11 4

17/18 SEM 1 AM7021 DYNAMICS 3 ME4662 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 1 AM7050 ELASTICITY (Ⅰ) 3 ME4662 EXCHANGE TECHNICAL ELECTIVE 12 4

14/15 SEM 2 ME582 FUNDAMENTALS OF DESIGN FOR RELIABILITY ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 ME557 METAL CUTTING PRINCIPLES ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 1&216/17 SEM 1&2 ME3MMSD MACHINE SYSTEM DYNAMICS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 1&2 ME1-HTHD THERMODYNAMICS 12 416/17 SEM 1&2 ME2HTHD THERMODYNAMICS 11 416/17 SEM 1&2 ME2HDMF DESIGN AND MANUFACTURING ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 1&2 ME3HTRB TRIBOLOGY ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 1&2 ME1-HMTX MECHATRONICS SENSORS AND ACTUATORS 11 416/17 SEM 1&2 ME2-HMTX MECHATRONICS 5.5 EXCHANGE UEM 27 416/17 SEM 1&2 ME3-HSAN STRESS ANALYSIS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 1&2 ME3-HFFM FUNDAMENTALS OF FRACTURE MECHANICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 1&2 ME2-HSAN STRESS ANALYSIS 5 ME2113 MECHANICS OF MATERIALS I 11 314/15 SEM 1&2 *ME-HSPAP *STRUCTURE, PROPERTIES AND APPLICATIONS OF POLYMERS 6 ME3662 TECHNICAL ELECTIVE 12 4

SWITZERLAND

IMPERIAL COLLEGE LONDON

NATIONAL CHIAO TUNG UNIVERSITY

TAIWAN

NATIONAL TAIWAI UNIVERSITY

NATIONAL TSING HUA UNIVERSITY

SWISS FEDERAL INSTITUTE OF TECHNOLOGY OF LAUSANNE

NATIONAL TAIWAN UNIVERSITY OF SCIENCE AND TECHNOLOGY

BILKENT UNIVERSITY

ME2143 and EX3888

SUSTAINABLE ENERGY CONVERSION AND ENGINEERING THERMODYNAMICS

NATIONAL CHENG KUNG UNIVERSITY

TURKEY

ME3221 AND ME2121





14/15 SEM 1&2 ME1-HFMX FLUID MECHANICS 5.5 ME2134 FLUID MECHANICS I 11 414/15 SEM 1&2 *ME3-HNUCN *INTRODUCTION TO NUCLEAR ENERGY 6 ME3663 TECHNICAL ELECTIVE 12 4

ME3101 MECHANICAL SYSTEM DESIGN I 11 4ME3102 MECHANICAL SYSTEM DESIGN II 11 4

14/15 SEM 1&2 ME3-MTDE THERMODYNAMICS AND ENERGY ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 1&2 ME2-HDYN DYNAMICS 4.5 ME3112 MECHANICS OF MACHINES 11 414/15 SEM 1&2 ME2-HHTR HEAT TRANSFER 4.5 ME3122 HEAT TRANSFER 11 414/15 SEM 1&2 ME2-HMATL MATERIALS 5.5 ME4255 MATERIALS FAILURE 11 414/15 SEM 1&2 ME3-HFEAA FINITE ELEMENTS ANALYSIS AND APPLICATIONS ME4291 FINITE ELEMENT ANALYSIS 11 414/15 SEM 1&2 ME1-HMATL MATERIALS 5.5 ME2151 PRINCIPLES OF MECHANICAL ENGINEERING MATE11 4

16/17 SEM 2 16MMC203 MANUFACTURING PLANNING & CONTROL ME3661 TECHNICAL ELECTIVE 12 416MMC401 PRODUCT DESIGN12MMC300 PRODUCT INFORMATION SYSTEMS - COMPUTER AIDED DESIGN SHORT OF 0.5 CONTACT HOURS TO BE COMPENSATED

16/17 SEM 2 16MMC300 PRODUCT INFORMATION SYSTEMS – COMPUTER AIDED DESIGN ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 16MMC803 BALLISTICS AND ROCKET PROPULSION ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 16MMC401 PRODUCT DESIGN ME3661 TECHNICAL ELECTIVE 12 4 SHORTFALL OF 3 CONTACT HOURS TO BE COMPENSDTED

16/17 SEM 2 12MMC300 PRODUCT INFORMATION SYSTEMS - COMPUTER AIDED DESIGN ME3261 COMPUTER-AIDED DESIGN AND MFG 12 4SHORTFALL OF 15 CONTACT HOURS TO BE COMPENSATED FROM OTHER MODULE.

16MMC401 PRODUCT DESIGN16MMC203 MANUFACTURING PLANNING AND CONTROL

16/17 SEM 2 16MMC802 COMPUTATIONAL FLUID DYNAMICS I ME4233 COMP MTDS IN FLUID MECHANICS 12 4 TO COMPENSATE FOR SHORTFALL OF 6 CONTACT HOURS

16/17 SEM 2 16MMC200 ENGINEERING MANAGEMENT: FINANCE, LAW AND QUALITY ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 3 CONTACT HOURS

16/17 SEM 2 16TTB107 VEHICLE LOADING AND SUSPENSIONS ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE FOR SHORTFALL OF 3 CONTACT HOURS16/17 SEM 2 16MMC105 KINEMATICS OF MACHINERY ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 16MMB802 FLUID MECHANICS II ME2135 FLUID MECHANICS II 11 4

16/17 SEM 2 16ELD568 SENSORS AND ACTUATORS FOR CONTROL ME2143 SENSORS AND ACTUATORS 11 4 TO COMPENSATE FOR SHORTFALL OF 1 CONTACT HOUR16/17 SEM 2 16MMB404 COMPUTER AIDED DESIGN MANUFACTURE AND TEST (CADMAT) ME3261 COMPUTER-AIDED DESIGN AND MFG 12 4

16/17 SEM 2 16MMB104 CONTROL ENGINEERING ME2142 FEEDBACK CONTROL SYSTEMS 11 4 TO COMPENSATE FOR SHORTFALL OF 1.34 CONTACT HOURS

16/17 SEM 2 16MMP602 MANUFACTURING SYSTEMS AND INTEGRATED DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 16 CONTACT HOURS16/17 SEM 2 ME15TTB201 HIGH SPEED AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 12 416/17 SEM 2 *ME15MMB404 *COMPUTER AIDED DESIGN MANUFACTURE AND TEST (CADMAT) ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 ME15MMD900 MECHATRONICS ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 15TTB110 INTERNAL COMBUSTION ENGINES ME4227 INTERNAL COMBUSTION ENGINES 12 416/17 SEM 2 00ELB004 CONTROL SYSTEM DESIGN ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 15MMB801 HEAT TRANSFER 10 ME3122 HEAT TRANSFER 11 416/17 SEM 2 15TTB107 VEHICLE DESIGN 10 ME4264 AUTOMOBILE DESIGN AND ENGINEERING 12 414/15 SEM 2 14MMC203 MANUFACTURING PLANNING & CONTROL ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 13MMC106 FINITE ELEMENT ANALYSIS 10 ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 2 13MMC105 KINEMATICS OF MACHINERY 10 ME3112 MECHANICS OF MACHINES 11 413/14 SEM 2 13MMC101 VIBRATION AND NOISE 10 ME4213 VIBRATION THEORY AND APPLICATIONS 12 4

13/14 SEM 2 *13TTC068 *CRASHWORTHINESS 10 ME3662 TECHNICAL ELECTIVE 12 4SHORTFALL OF 6 CONTACT HOURS TO BE COMPENSATED FROM OTHER MODULE.

13/14 SEM 2 13MMB404 COMPUTER AIDED DESIGN MANUFACTURE AND TEST (CADMAT) 10 ME3102 MECHANICAL SYSTEMS DESIGN II 11 413/14 SEM 2 13MMC106 FINITE ELEMENT ANALYSIS 10 ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 2 13MMD900 MECHATRONICS 10 ME3102 MECHANICAL SYSTEM DESIGN II 11 413/14 SEM 2 13MMC802 COMPUTATIONAL FLUID DYNAMICS I 10 ME4233 COMPUTATIONAL METHOD IN FLUID DYNANICS 11 413/14 SEM 2 13TTB107 VEHICLE DESIGN 10 ME4264 AUTOMOBILE DESIGN AND ENGINEERING 11 413/14 SEM 2 13TTC051 AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 11 413/14 SEM 2 13MMB801 HEAT TRANSFER 10 ME3122 HEAT TRANSFER 11 4

16/17 SEM 2 MECH302P DYNAMICS AND CONTROL ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 MECH202P CONTROL AND INSTRUMENTATION ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 *MECH201P *MANUFACTURING AND DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 CENG203P PROCESS HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 MECH1008 APPLIED MECHANICS ME3112 MECHANICS OF MACHINES 11 4

LOUGHBOROUGH UNIVERSITY

16/17 SEM 2

16/17 SEM 2 ME3103 MECHANICAL SYSTEMS DESIGN

11

DESIGN AND MANUFACTURE

ME3103 MECHANICAL SYSTEMS DESIGN 6

10.5ME2-HDMF

UNIVERSITY COLLEGE LONDON, UNIVERSITY OF LONDON

14/15 SEM 1&2





14/15 SEM 2 MM3ITM INTRODUCTION TO TRANSPORT MATERIALS 10 ME3251 MATERIALS FOR ENGINEERS 12 414/15 SEM 2 MM3SV2 STRUCTURAL VIBRATION 2 10 ME4213 VIBRATION THEORY AND APPLICATIONS 12 414/15 SEM 2 MM4AER AERODYNAMICS 10 ME4231 AERODYNAMICS AND PROPULSION 12 414/15 SEM 2 MM3HTR HEAT TRANSFER 10 ME3122 HEAT TRANSFER 11 4

17/18 SEM 1 EM40JN HEAT AND MOMENTUM TRANSFER ME3662 EXCHANGE ELECTIVE 1 12 417/18 SEM 1 EM501Q ADVANCED COMPOSITE MATERIALS ME4662 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 1 EG3007 ENGINEERING ANALYSIS AND METHODS 1 ME3662 EXCHANGE ELECTIVE 1 12 417/18 SEM 1 EG501S NUMERICAL SIMULATION OF WAVES ME4662 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 1 EE3043 CONTROL SYSTEMS A ME2142 FEEDBACK CONTROL SYSTEMS 11 417/18 SEM 1 EM40JN HEAT AND MOMENTUM TRANSFER ME3662 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 1 EM501Q ADVANCED COMPOSITE MATERIALS ME4662 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 1 EG3007 ENGINEERING ANALYSIS AND METHODS 1 ME3662 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 1 EG501S NUMERICAL SIMULATION OF WAVES ME4662 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 1 EG501V COMPUTATIONAL FLUID DYNAMICS 15 ME4233 COMP MTDS IN FLUID MECHANICS 12 417/18 SEM 1 EX3030 HEAT, MASS & MOMENTUM TRANSFER 15 ME3122 HEAT TRANSFER 11 416/17 SEM 2 EP3595 DRILLING AND WELL ENGINEERING ME3991 EXCHANGE ELECTIVE 1 12 416/17 SEM 2 EX3502 SEPERATION PROCESS ME3992 EXCHANGE ELECTIVE 2 12 416/17 SEM 2 EG2501 DESIGN AND COMPUTING ME3663 TECHNICAL ELECTIVE 12 416/17 SEM 2 EM3522 DESIGN OF MECHANICAL ELEMENTS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 EM3511 DYNAMICS 1 ME4213 VIBRATION THEORY AND APPLICATIONS 12 416/17 SEM 2 EM3521 ENGINEERING THERMODYNAMICS ME3221 SUSTAINABLE ENERGY CONVERSION 12 416/17 SEM 2 *EM4529 *NON LINEAR MECHANICS ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 EG4578 GROUP DESIGN PROJECT (BENG) ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 EX3502 SEPARATION PROCESSES 1 ME3991 TECHNICAL ELECTIVE 12 416/17 SEM 2 EP3596 RESERVOIR ENGINEERING I - FUNDAMENTALS ME3992 TECHNICAL ELECTIVE (OOGT) 12 415/16 SEM 2 EP3595 DRILLING AND WELL ENGINEERING ME4992 TECHNICAL ELECTIVE (OOGT) 12 415/16 SEM 2 EP4531 FIELD DEVELOPMENT AND PETROLEUM ECONOMICS ME4991 TECHNICAL ELECTIVE (OOGT) 12 414/15 SEM 2 EG3576 COMMUNICATIONS ENGINEERING 2 ME4662 TECHNICAL ELECTIVE 12 414/15 SEM 2 EG2504 ELECTRONIC SYSTEMS 15 ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 EG3501 CHEMICAL REACTION ENGINEERING ME4662 TECHNICAL ELECTIVE 12 414/15 SEM 2 EG4546 COMMUNICATIONS ENGINEERING 2 ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 EG3598 WELL TESTING ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 EG3596 RESERVOIR ENGINEERING I - FUNDAMENTALS 15 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 CS1520 COMPUTER ARCHITECTURE ME3241 MICROPROCESSOR APPLICATIONS 12 413/14 SEM 2 EG3502 SEPARATION PROCESSES 1 15 ME3991 TECHNICAL ELECTIVE 12 413/14 SEM 2 GL2512 INTRODUCTION TO GEOLOGY FOR PETROLEUM ENGINEERS 15 ME3992 TECHNICAL ELECTIVE 12 413/14 SEM 2 EG3595 DRIILLING AND WELL ENGINEERING 15 ME3991 TECHNICAL ELECTIVE 12 413/14 SEM 2 EG3511 DYNAMICS 1 15 ME3112 MECHANICS OF MACHINES 11 4

16/17 SEM 216/17 SEM 216/17 SEM 216/17 SEM 2 MENG31101 HEAT TRANSFER ME3122 HEAT TRANSFER 11 4

16/17 SEM 1 ME3F7 INFORMATION THEORY AND CODING ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME3C9 FRACTURE MECHANICS OF MATERIALS & STRUCTURES ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 1 & 2 3F2 SYSTEMS AND CONTROL ME4246 MODERN CONTROL SYSTEM 12 416/17 SEM 1 & 2 GM1 MULTIDISCIPLINARY DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 1 & 2 - LIGHT AIRCRAFT DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 1 & 2 4C4 DESIGN METHODS ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 1 & 2 3A6 HEAT & MASS TRANSFER ME3122 HEAT TRANSFER 11 415/16 SEM 1 & 2 3B4 ELECTRIC DRIVE SYSTEMS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 1&2 3A3 FLUID MECHANICS II ME3232 COMPRESSIBLE FLOW 12 413/14 SEM 1 & 2 3C5 DYNAMICS 16 ME3112 MECHANICS OF MACHINE 11 413/14 SEM 1 & 2 - YEAR 3 DESIGN PROJECTS, FULL TECHNICAL REPORTS, ENGINEERING AREA ACTIVME3102 MECHANICAL SYSTEMS DESIGN II 11 413/14 SEM 1 & 2 3A3 FLUID MECHANICS II 32 ME3232 COMPRESSIBLE FLOW 12 413/14 SEM 1 & 2 3C6 VIBRATION 16 ME4213 VIBRATION THEORY AND APPLICATION 12 413/14 SEM 1 & 2 3C7 MECHANICS OF SOLIDS 16 ME3211 MECHANICS OF SOLIDS 12 413/14 SEM 1 & 2 3D7 FINITE ELEMENT METHODS 16 ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 1 & 2 4M16 NUCLEAR POWER ENGINEERING 16 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 1 & 2 3A5 THERMODYNAMICS & POWER GENERATION 16 ME2121 ENGINEERING THERMODYNAMICS 11 4

UNITED KINGDOM

UNIVERSITY OF CAMBRIDGE

UNIVERSITY OF NOTTINGHAM

UNIVERSITY OF BRISTOL

UNIVERSITY OF ABERDEEN





17/18 SEM 1 ENG3059011 AIRCRAFT PERFORMANCE 3 ME4241 AIRCRAFT PERFORMANCE AND STABILITY 12 4 SHORTFALL OF 1 MC17/18 SEM 1 ENG3035007 MATERIALS AND MANUFACTURING 3 ME3251 MATERIALS FOR ENGINEERS 12 4 SHORTFALL OF 1 MC17/18 SEM 1 ENG5294010 FINITE ELEMENT ANALYSIS M ME4291 FINITE ELEMENT ANALYSIS 12 4 SHORTFALL OF 1 MC16/17 SEM 2 *ENG3024 *ELECTRONIC CIRCUIT DESIGN 3 ME3103 MECHANICAL SYSTEMS DESIGN 11 6 SHORTFALL OF 30.5 CONTACT HOURS16/17 SEM 2 *ENG2037 *INTRODUCTION TO AERODYNAMICS 2 ME4231 AERODYNAMICS AND PROPULSION 12 4 SHORTFALL OF 6 CONTACT HOURS16/17 SEM 2 *PHYS4006 *ENERGY AND ENVIRONMENT ME4662 TECHNICAL ELECTIVE 12 416/17 SEM 2 *ENG4067 *FLIGHT DYNAMICS 4 ME4662 TECHNICAL ELECTIVE 12 4 SHORTFALL OF 15 CONTACT HOURS16/17 SEM 2 *ENG3053 *THERMODYNAMICS OF ENGINES M3 ME4227 INTERNAL COMBUSTION ENGINES 12 4 SHORTFALL OF 5 CONTACT HOURS16/17 SEM 2 ENG5283 CIVIL DESIGN PROJECT M ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 ENG3022 DYNAMICS AND CONTROL M3 ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 ENG3032 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 ENG3015 CONTROL EE3 ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 ENG4179 ADVANCED THERMAL ENGINEERING 4 ME4661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ENG2028 ELEMENTS OF THERMODYNAMICS FOR AEROSPACE PROPULSION 2 ME3221 SUSTAINABLE ENERGY CONVERSION 12 416/17 SEM 2 ENG5008 AEROSPACE CONTROL I 10 ME2142 FEEDBACK CONTROL SYSTEMS 11 4 SHORTFALL OF 2 CREDITS16/17 SEM 2 ENG4102 PHYSICS OF FLUIDS 4 ME2135 FLUID MECHANICS II 11 415/16 SEM 2 *ENG4079 *INDUSTRIAL AERODYNAMICS 415/16 SEM 2 *ENG4023 *AIRCRAFT VIBRATION AND AEROELASTICITY 414/15 SEM 2 ENG5299 DYNAMIC M5 10 ME3112 MECHANICS OF MACHINES 11 4

16/17 SEM 1 C1 AUTOMOTIVE ENGINEERING ME4662 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 B8 MATERIALS ME3251 MATERIALS FOR ENGINEERS 12 416/17 SEM 2 C26 ELECTROCHEMICAL ENERGY TECHNOLOGY ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 B3 GROUP PROJECT ME3101 MECHANICAL SYSTEMS DESIGN I 11 415/16 SEM 2 C13 PRODUCTION ENGINEERING ME3162 MANUFACTURING PROCESSESS 11 415/16 SEM 2 C2 AEROTHERMAL ENGINEERING ME4231 AERODYNAMICS AND PROPULSION 12 415/16 SEM 2 C4 MECHANICAL PERFORMANCE AND INTERGRITY ME4291 FINITE ELEMENT ANALYSIS 12 4

16/17 SEM 2 *MEC421 *SPORTS ENGINEERING ME3662 TECHNICAL ELECTIVE 12 4 TO COMENSATE SHORTFALL OF 13.68 CONTACT HOURS16/17 SEM 2 *MEC310 *ENERGY: PROPERTIES AND OPTIMISATION ME3662 TECHNICAL ELECTIVE 12 4 TO COMPENSATE SHORTFALL OF 11 CONTACT HOURS16/17 SEM 2 *MEC302 *ENGINEERING COMPOSITE MATERIALS ME3661 TECHNICAL ELECTIVE 12 4 TO COMPENSATE SHORTFALL OF 11.7 CONTACT HOURS

1617 SEM 2 *MEC410 *STRUCCTURAL VIBRATION: ANALYSIS AND PRACTICE ME4213 VIBRATION THEORY AND APPLNS 12 4 TO COMPENSATE SHORTFALL OF 12.40 CONTACT HOURS16/17 SEM 2 MEC201 DYNAMICS OF STRUCTURES AND MACHINES ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 *ASC6342 *FEEDBACK SYSTEMS DESIGN ME2142 FEEDBACK CONTROL SYSTEMS 11 4

16/17 SEM 2 *MEC313 *FINITE ELEMENT TECHNIQUES ME4291 FINITE ELEMENT ANALYSIS 12 4 TO COMPENSATE FOR SHORTFALL OF 10.1 CONTACT HOURS16/17 SEM 2 MEC308 VIBRATIONS AND ACOUSTICS ME4213 VIBRATION THEORY AND APPLICATIONS 12 4

16/17 SEM 2 MEC301MECHATRONICS (TITLE CHANGED TO "CONTROL ENGINEERING FOR MECHANICAL ENGINEERS") ME2142 FEEDBACK CONTROL SYSTEMS 11 4

15/16 SEM 2 *MEC413 *AIRCRAFT AERO-ELASTICITY AND LOADS ME4235 INTRODUCTION TO AEROELASTICITY 12 4

15/16 SEM 2 MEC320 COMPUTATIONAL FLUID DYNAMICS ME4233COMPUTATIONAL METHODS IN FLUID MECHANICS 12 4

15/16 SEM 2 *MEC203 *HEAT TRANSFER ME3122 HEAT TRANSFER 11 4 TO COMPENSATE FOR SHORTFALL OF 2.4 CONTACT HOURS14/15 SEM 2 MEC414 TECHNOLOGY STRATEGY AND BUSINESS PLANNING ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 *MEC406 *ENGINEERING COMPOSITE MATERIALS 10 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 MEC201 DYNAMICS OF STRUCTURES AND MACHINES 10 ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 MAT2410 BIOMATERIALS II ME4253 BIOMATERIALS ENGINEERING 12 413/14 SEM 2 MEC345 AERO PROPULSION 1013/14 SEM 2 MEC407 FUNDAMENTAL BIOMECHANICS 1013/14 SEM 2 MEC308 VIBRATIONS AND ACOUSTICS 10 ME3661 TECHNICAL ELECTIVE 12 4

15/16 SEM 2 SESM3028 BIOMATERIALS ME4663 TECHNICAL ELECTIVE 12 415/16 SEM 2 MATH3082 OPTIMISATION ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 SESM3029 ENGINEERING DESIGN WITH MANAGEMENT ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 SESM6037 AUTOMOTIVE PROPULSION ME3662 TECHNICAL ELECTIVE 12 415/16 SEM 2 FEEG3002 VEHICLE POWERTRAIN, NOISE AND VIBRATION ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 FEEG6010 ADVANCED FINITE ELEMENT ANALYSIS ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 SESG6040 FAILURE OF MATERIALS AND COMPONENTS ME4255 MATERIALS FAILURE 12 415/16 SEM 2 ISVR6133 ADVANCED VIBRATION ME4213 VIBRATION THEORY AND APPLICATIONS 12 415/16 SEM 2 SESA6064 AIRCRAFT STRUCTURES ME4212 AIRCRAFT STRUCTURES 12 415/16 SEM 2 SESM3032 HEAT TRANSFER AND APPLICATIONS ME3122 HEAT TRANSFER 11 4

UNIVERSITY OF MANCHESTER

TECHNICAL ELECTIVE

UNIVERSITY OF OXFORD

UNIVERSITY OF SOUTHAMPTON

UNIVERSITY OF SHEFFIELD

12

ME4235

ME3662

INTRODUCTION TO AEROELASTICITY 12 4

UNIVERSITY OF GLASGOW

4





13/14 SEM 2 ENG 4370 FINITE ELEMENT METHODS 3 ME4291 FINITE ELEMENT ANALYSIS 12 4

14/15 SEM 2 ENG419 HEAT TRANSFER 4 ME3122 HEAT TRANSFER 11 414/15 SEM2 ENG ME302 ENGINEERING MECHANICS II 4 ME3112 MECHANICS OF MACHINES 11 413/14 SEM 2 ENG ME526 SIMULATION OF PHYSICAL PROCESSES ME4291 FINITE ELEMENT ANALYSIS 12 4

13/14 SEM 2 ME411 INTRODUCTION TO HEAT TRANSFER 3 ME3122 HEAT TRANSFER 11 413/14 SEM 2 ME446 INTEGRATED DESIGN II 3 ME3102 MECHANICAL SYSTEM DESIGN II 11 413/14 SEM 2 ME442 ENGINEERING ANALYSIS USING THE FINITE ELEMENT METHOD ME4291 FINITE ELEMENT ANALYSIS 12 413/14 SEM 2 ES223 RIGID BODY DYNAMICS 3 ME3112 MECHANICS OF MACHINES 11 413/14 SEM 2 ME326 INTERMEDIATE FLUID MECHANICS 3 ME2135 FLUID MECHANICS II 11 413/14 SEM 2 EE324 DYNAMICAL SYSTEMS 3 ME2142 FEEDBACK CONTROL SYSTEMS 11 4

15/16 SEM 2 ENGR3370 CONTROLS ME2142 FEEDBACK CONTROL SYSTEMS 11 415/16 SEM 2 ENGR2340 DYNAMICS ME3112 MECHANICS OF MACHINES 11 4

16/17 SEM 2 EN.530.366 SPACECRAFT INSTRUMENTATION PROJECT ME4662 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 EN.530.417 FABRICATOLOGY – ADVANCED MATERIALS PROCESSING ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 EN..530.486 MECHANICS OF LOCOMTION ME4662 TECHNICAL ELECTIVE 12 416/17 SEM 2 EN.530.470 SPACE VEHICLE DYNAMICS AND CONTROL ME4663 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 MEAM415 PRODUCT DESIGN ME4662 EXCHANGE TECHNICAL ELECTIVE 12 4 TO COMPENSATE 9 CONTACT HOURS.16/17 SEM 2 MSE393 MATERIALS SELECTION ME3251 MATERIALS FOR ENGINEERS 12 416/17 SEM 2 MEAM513 FEEDBACK CONTROL DESIGN AND ANALYSIS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MEAM333 HEAT AND MASS TRANSFER ME3122 HEAT TRANSFER 11 414/15 SEM 2 ME340 MECHANICAL ENGINEERING DESIGN METHODOLOGY ME3101 MECHANICAL SYSTEMS DESIGN I 11 414/15 SEM 2 ME370 VIBRATIONS OF MECHANICAL SYSTEMS 3 ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 E MCH 213 STRENGTH OF MATERIALS ME2113 MECHANICS OF MATERIALS I 11 314/15 SEM 2 ME400 THERMODYNAMICS OF PROPULSION AND POWER SYSTEMS ME4227 INTERNAL COMBUSTION ENGINE 12 414/15 SEM 2 ME410 HEAT TRANSFER ME3122 HEAT TRANSFER 11 414/15 SEM 2 ME315 HEAT TRANSFER LABORATORY14/15 SEM 2 ME410 HEAT TRANSFER14/15 SEM 2 ME370 VIBRATION OF MECHANICAL SYSTEMS ME4213 VIBRATION THEORY AND APPLICATION 12 4

16/17 SEM 2 ME43000 POWER ENGINEERING ME3221 SUSTAINABLE ENERGYCONVERSION16/17 SEM 2 ME35200 MACHINE DESIGN I ME3103 MECHANICAL SYSTEMS DESIGN 11 416/17 SEM 2 ME44400 COMPUTER-AIDED DESIGN AND PROTOTYPING ME3261 COMPUTER-AIDED DESIGN AND MFG 12 416/17 SEM 2 ME46300 ENGINEERING DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MSE270 ATOMISTIC MATERIALS SCIENCE ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 MSE330 PROCESSING AND PROPERTIES OF MATERIALS ME3251 MATERIALS FOR ENGINEERS 12 415/16 SEM 2 ME440 AUTOMOTIVE PRIME MOVERS: GREEN ENGINES AND CLEAN FUELS ME4227 INTERNAL COMBUSTION ENGINE 12 415/16 SEM 2 ME315 HEAT AND MASS TRANSFER ME3122 HEAT TRANSFER 11 415/16 SEM 2 ME363 PRINCIPLES AND PRACTICES OF MANUFACTURING PROCESSESS ME3162 MANUFACTURING PROCESSES 11 415/16 SEM 2 ME274 BASIC MACHINES II ME3112 MECHANICS OF MACHINES 11 415/16 SEM 2 ME497 MEASUREMENT AND CONTROL SYSTEMS I ME2142 FEEDBACK CONTROL SYSTEMS 11 415/16 SEM 2 ME463 ENGINEERING DESIGN ME3102 MECHANICAL SYSTEMS DESIGN II 11 4

16/17 SEM 2 MECH572 AEROSPACE SYSTEMS ENGINEERING ME4662 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH311 MECHANICS OF SOLIDS ME4663 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH488 DESIGN OF MECHATRONIC SYSTEMS ME4662 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH404 DESIGN OF MECHATRONIC SYSTEMS ME4662 EXCHANGE TECHNICAL ELECTIVE 12 416/17 SEM 2 MECH412 001 VIBRATIONS ME4213 VIBRATION THEORY AND APPLNS 12 416/17 SEM 2 MECH420 FUNDAMENTALS OF CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MECH404 001 MECHANICAL DESIGN PROJECT ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MECH417 FINITE ELEMENT ANALYSIS ME4291 FINITE ELEMENT ANALYSIS 12 4

FRANKLIN W. OLIN COLLEGE OF ENGINEERING

HEAT TRANSFERME3122

JOHNS HOPKINS UNIVERSITY

RICE UNIVERSITY

YORK UNIVERSITY

BOSTON UNIVERSITY

CARNEGIE MELLON UNIVERSITY

PENNSYLVANIA STATE UNIVERSITY

CLARKSON UNIVERSITY

PURDUE UNIVERSITY

411





16/17 SEM 2 MECH498 001 INTRODUCTION TO ROBOTICS ME4245 ROBOT MECHANICS AND CONTROL 12 4

15/16 SEM 2 MATSCI316 NANOSCALE SCIENCE, ENGINEERING, AND TECHNOLOGY ME4663 TECHNICAL ELECTIVE 12 415/16 SEM 2 AA252 TECHNIQUES OF FAILURE ANALYSIS ME4662 TECHNICAL ELECTIVE 12 415/16 SEM 2 CS225A EXPERIMENTAL ROBOTICS ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 CS223A INTRODUCTION TO ROBOTICS ME3664 TECHNICAL ELECTIVE 12 415/16 SEM 2 AA210A FUNDAMENTALS OF COMPRESSIBLE FLOW ME3232 COMPRESSIBLE FLOW 12 415/16 SEM 2 ME131A HEAT TRANSFER ME3122 HEAT TRANSFER 11 4

16/17 SEM 2 MEEN489 CUNSTOM MANUFACTURING ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TP COMPENSTE SHORTFALL OF 15 CONTACT HOURS16/17 SEM 2 MEEN401 INTRO TO MECHANICAL ENGINEERING DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 PETE225 INTRODUCTION TO DRILLING SYSTEMS ME4991 TECHNICAL ELECTIVE (OOGT) 12 416/17 SEM 2 PETE310 RESERVOIR FLUIDS ME4992 TECHNICAL ELECTIVE (OOGT) 12 416/17 SEM 2 PETE321 FORMATION EVALUATION ME4992 TECHNICAL ELECTIVE (OOGT) 12 416/17 SEM 2 PETE323 FUNDAMENTALS OF RESERVOIR ENGINEERING ME4991 TECHNICAL ELECTIVE (OOGT) 12 416/17 SEM 2 PETE324 WELL TESTING ME4995 TECHNICAL ELECTIVE (OOGT) 12 416/17 SEM 2 PETE325 PETROLEUM PRODUCTION SYSTEMS ME4993 TECHNICAL ELECTIVE (OOGT) 12 416/17 SEM 2 PETE353 PETROLEUM PROJECT EVALUATION ME4994 TECHNICAL ELECTIVE (OOGT) 12 416/17 SEM 2 PETE355 DRILLING ENGINEERING ME4993 TECHNICAL ELECTIVE (OOGT) 12 416/17 SEM 2 MEEN363 DYNAMICS AND VIBRATIONS ME3112 MECHANICS OF MACHINES 11 4

16/17 SEM 2 MEEN222 MATERIALS SCIENCE ME2151 PRINCIPLES OF MECHANICAL ENGINEERING MATERIALS 11 4

16/17 SEM 2 MEEN315 PRINCIPLES OF THERMODYNAMICS ME2121 ENGINEERING THERMODYNAMICS 11 416/17 SEM 2 MEEN461 HEAT TRANSFER ME3122 HEAT TRANSFER 11 4

16/17 SEM 2 AEE471 COMPUTATIONAL FLUID DYNAMICS ME4233 COMP MTDS IN FLUID MECHANICS 11 416/17 SEM 2 AEE362 HIGH SPEED AERODYNAMICS ME3232 COMPRESSIBLE FLOW 12 41617 SEM 2 MAE404 FINITE ELEMENTS IN ENGINEERING ME4291 FINITE ELEMENT ANALYSIS 11 416/17 SEM 2 AEE325 AEROSPACE STRUCTURES AND MATERIALS ME4212 AIRCRAFT STRUCTURES 12 416/17 SEM 2 AEE313 AIRCRAFT DYNAMICS AND CONTROL ME4241 AIRCRAFT PERFORMANCE AND STABILITY 12 416/17 SEM 2 AME400 *SENIOR MECHANICAL LABORATORY ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE SHORTFALL OF 17 CONTACT HOURS16/17 SEM 2 EM508 FRACTURE MECHANICS ME4661 EXCHANGE ELECTIVE 12 416/17 SEM 2 MAE494 TOPIC: SPACE PROPULSION ME3661 TECHNICAL ELECTIVE 12 4

1617 SEM 2 ENGR102B *INTRODUCTION TO ENGINEERING DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE SHORTFALL OF 12.5 CONTACT HOURS

16/17 SEM 2 MAE589 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 AEE466 ROTARY WING AERODYNAMICS AND PERFORMANCE ME3661 TECHNICAL ELECTIVE 12 4

AME442 HVAC SYSTEM DESIGNAME487 GUIDED SELF-STUDIES IN MECHATRONICS

16/17 SEM 2 AME445 RENEWABLE ENERGY SYSTEMS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 AME487 GUIDED SELF-STUDIES IN MECHATRONICS ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MEE482 THERMODYNAMICS ME3221 SUSTAINABLE ENERGY CONVERSION 12 416/17 SEM 2 *AME422 *AEROSPACE ENGINEERING DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 AME455 CONTROL SYSTEMS DESIGN ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 EEE480 FEEDBACK SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MET440 FINITE ELEMENT ANALYSIS ME4291 FINITE ELEMENT ANALYSIS 12 416/17 SEM 2 MSE355 STRUCTURE AND DEFECTS ME3663 TECHNICAL ELECTIVE 12 416/17 SEM 2 AEE360 AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 12 416/17 SEM 2 MET434 ENGINEERING THERMO-FLUIDS III ME3122 HEAT TRANSFER 11 416/17 SEM 2 AEE463 AIRCRAFT PROPULSION ME4661 TECHNICAL ELECTIVE 12 416/17 SEM 2 MAE318 SYSTEM DYNAMICS AND CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MAE436 COMBUSTION ME4662 TECHNICAL ELECTIVE 12 416/17 SEM 2 AEE360 AERODYNAMICS ME4661 TECHNICAL ELECTIVE 12 415/16 SEM 2 BME318 BIOMATERIALS ME4253 BIOMATERIALS ENGINEERING 12 415/16 SEM 2 AME454 SPACECRAFT ATTITUDE DYNAMICS AND CONTROL ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 AME446 FUEL CELLS FUNDAMENTALS AND DESIGN ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME352 DYNAMICS OF MACHINES ME3112 MECHANICS OF MACHINES 11 414/15 SEM 2 AME432 HEAT TRANSFER ME3122 HEAT TRANSFER 11 414/15 SEM 2 AME463 FINITE ELEMENT ANALYSIS WITH ANSYS ME4661 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME321 AIRCRAFT PERFORMANCE ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME324A MECHANICAL BEHAVIOUR OF ENGINEERING MATERIALS 3 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME460 MECHANICAL VIBRATIONS ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME474 RELIABILITY AND QUALITY ANALYSIS ME4663 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME320 AERODYNAMICS ME3663 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME302 NUMERICAL METHODS 3 ME3662 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME301 ENGINEERING ANALYSIS 3 ME3661 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME457 ORBITAL MECHANICS AND SPACE FLIGHT ME4662 TECHNICAL ELECTIVE 12 414/15 SEM 2 AME442 HVAC SYSTEM DESIGN ME4661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 EME172 AUTOMATIC CONTROL OF ENGINEERING SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 41617 SEM 2 EME171 MECHATRONIC SYSTEMS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ENG102 DYNAMICS ME3112 MECHANICS OF MACHINES 11 4

MECHANICAL SYSTEMS DESIGN

UNIVERISTY OF ARIZONA

TEXAS A&M UNIVERSITY

16/17 SEM 2 ME3103

USA

STANFORD UNIVERSITY

11 6





16/17 SEM 2 EME185A *MECH SYSEM DESIGN PROJECT ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 32.1 CONTACT HOURS

16/17 SEM 2 ME142 MECHATRONICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 EME223 MULTIBODY DYNAMICS ME3112 MECHANICS OF MACHINES 11 4

16/17 SEM 2 EME150B MECHANICAL DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 15.4 CONTACT HOURS

16/17 SEM 2 ENGR190 ENGINEERING CAPSTONE DESIGN ME3103 MECHANICAL SYSTEMS DESIGN 11 615/16 SEM 2 EAE129 STABILITY AND CONTROL OF AEROSPACE VEHICLES ME4241 AIRCRAFT PERFORMANCE AND STABILITY 12 415/16 SEM 2 EME150B MECHANICAL DESIGN ME3102 MECHANICAL SYSTEMS DESIGN II 11 415/16 SEM 2 EM165 HEAT TRANSFER ME3122 HEAT TRANSFER 11 415/16 SEM 2 MAE133 FINITE ELEMENT METHODS IN STRUCTURES ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 EME185A MECHANICAL ENGINEERING SYSTEMS DESIGN PROJECT ME3102 MECHANICAL SYSTEMS DESIGN II 11 415/16 SEM 2 EAE 138 AIRCRAFT PROPULSION ME4231 AERODYNAMICS AND PROPULSION 12 415/16 SEM 2 EME150B MECHANICAL DESIGN ME3102 MECHANICAL SYSTEMS DESIGN II 11 415/16 SEM 2 EM165 HEAT TRANSFER ME3122 HEAT TRANSFER 11 415/16 SEM 2 MAE133 FINITE ELEMENT METHODS IN STRUCTURES ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 EAE 138 AIRCRAFT PROPULSION ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 EAE 135 AEROSPACES STRUCTURES ME4212 AIRCRAFT STRUCTURES 12 415/16 SEM 2 EME 161 COMBUSTION AND THE ENVIRONMENT ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 EAE 129 STABILITY AND CONTROL OF AEROSPACE VEHICLES ME3661 TECHNICAL ELECTIVE 12 4

16/17 SEM 2 ENGRMAE 120 HEAT AND MASS TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 ENGRMAE 170 INTRODUCTION TO CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 ENGRMAE 130B INTRODUCTION TO VISCOUS AND COMPRESSIBLE FLOWS ME2135 FLUID MECHANICS II 11 416/17 SEM 2 ENGRMAE 145 THEORY OF MACHINES AND MECHANISMS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 ENGRMAE 110 COMBUSTION AND FUEL CELL SYSTEMS ME4663 TECHNICAL ELECTIVE 12 416/17 SEM 2 ENGRMAE 188 ENGINEERING DESIGN IN INDUSTRY ME3103 MECHANICAL SYSTEMS DESIGN 11 6

15/16 SEM 2 ENGRMAE 158 AIRCRAFT PERFORMANCE ME4241 AIRCRAFT PERFORMANCE, STABILITY AND CONTROL 12 4

15/16 SEM 2 ENGRMAE 146 ASTRONAUTICS ME4663 TECHNICAL ELECTIVE 12 415/16 SEM 2 ENGRMAE 147 VIBRATIONS ME4213 VIBRATION THEORY AND APPLICATIONS 12 415/16 SEM 2 ENGRMAE 112 PROPULSION ME4231 AERODYNAMICS AND PROPULSION 12 415/16 SEM 2 ENGRMAE 164 AIR POLLUTION AND CONTROL ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 ENGRMAE 157 LIGHTWEIGHT STRUCTURES ME4212 AIRCRAFT STRUCTURES 12 4

16/17 SEM 2 ME140 VIBRATION AND CONTROLS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 EME172 AUTOMATIC CONTROL OF ENGINEERING SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 ME135 FINITE ELEMENT ANALYSIS ME4291 FINITE ELEMENT ANALYSIS 12 416/17 SEM 2 ME165 OCEAN ENVIRONMENT MECHANICS ME3661 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME141 LINEAR CONTROLS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 ME261 ENERGY STORAGE ME3662 TECHNICAL ELECTIVE 12 416/17 SEM 2 ME135 DESIGN OF MICROPROCESSOR-BASED MECHANICAL SYSTEMS ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 1 ME110 INTRODUCTION TO PRODUCT DEVELOPMENT ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MEC ENG260A ADVANCED FLUID MECHANICS I ME2135 FLUID MECHANICS II 11 416/17 SEM 2 ME136 AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 12 416/17 SEM 2 ME144 INTRODUCTION TO MULTI-BODY DYNAMICS ME3112 MECHANICS OF MACHINES 11 4

16/17 SEM 2 MAE171AINTRODUCTION TO FEEDBACK AND CONTROL SYSTEMS: DYNAMIC SYSTEMS CONTROL I ME2142 FEEDBACK CONTROL SYSTEMS 11 4

16/17 SEM 2 MECENG130 DESIGN OF PLANAR MACHINERY ME3112 MECHANICS OF MACHINES 11 415/16 SEM 2 ME101 INTRODUCTION TO LEAN MANUFACTURING ME3661 TECHNICAL ELECTIVE 12 415/16 SEM 2 ME102B MECHATRONICS DESIGN ME3102 MECHANICAL SYSTEMS DESIGN II 11 4

15/16 SEM 2 ME110 INTRODUCTION TO PRODUCT DEVELOPMENT ME4263 FUNDAMENTALS OF PRODUCT DEVELOPMENT 12 415/16 SEM 2 ME146 ENERGY CONVERSION PRINCIPLES ME3221 ENERGY CONVERSION PROCESSES 12 414/15 SEM 2 ME106 FLUID MECHANICS ME2134 FLUID MECHANICS I 11 413/14 SEM 2 ME170 ENGINEERING MECHANICS III (48L/16T) 3 ME3112 MECHANICS OF MACHINES 11 413/14 SEM 2 ME109 HEAT TRANSFER (48L/16T) 3 ME3122 HEAT TRANSFER 11 413/14 SEM 2 ME101 HIGH MIX/LOW VOLUME MANUFACTURING 3 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 2 MATSCI 121 METALS PROCESSING ME3662 TECHNICAL ELECTIVE 12 413/14 SEM 2 ME135 DESIGN OF MICROPROCESSOR-BASED MECHANICAL SYSTEMS 4 ME3102 MECHANICAL SYSTEMS DESIGN 2 11 413/14 SEM 2 ME131 VEHICLE DYNAMICS AND CONTROL ME4214 VEHICLE DYNAMICS 11 4*13/14 SEM 2 *ME40 THERMODYNAMICS ME2121 ENGINEERING THERMODYNAMICS 11 313/14 SEM 1 - DESIGN OF PLANAR MACHINERY 3 ME3112 MECHANICS OF MACHINES 11 413/14 SEM 1 - DYNAMIC SYSTEMS AND FEEDBACK 3 ME2142 FEEDBACK CONTROL SYSTEMS 11 413/14 SEM 1 - ENGINEERING AERODYNAMICS 3 ME4231 AERODYNAMICS AND PROPULSION 12 413/14 SEM 1 - MECHANICS OFFSHORE SYSTEMS 3 ME3661 TECHNICAL ELECTIVE 12 413/14 SEM 1 - FEEDBACK CONTROL SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 4

17/18 SEM 2 ME360 SIGNAL PROCESSING ME2142 FEEDBACK CONTROL SYSTEMS 11 417/18 SEM 2 ME403 INTERNAL COMBUSTION ENGINES ME4227 INTERNAL COMBUSTION ENGINES 12 4

UNIVERSITY OF CALIFORNIA, BERKELEY

UNIVERSITY OF CALIFORNIA, IRVINE

UNIVERSITY OF CALIFORNIA, DAVIS





17/18 SEM 2 NPRE470 FUEL CELLS AND HYDROGEN SOURCES 3 ME4662 EXCHANGE TECHNICAL ELECTIVE 12 417/18 SEM 2 ME320 HEAT TRANSFER 4 ME3122 HEAT TRANSFER 11 416/17 SEM 2 ME470 SENIOR DESIGN PROJECT ME3103 MECHANICAL SYSTEMS DESIGN 11 6 NO NEED FOR COMPENSATION15/16 SEM 2 TAM412 INTERMEDIATE DYNAMICS ME4213 VIBRATION THEORY AND APPLICATION 12 415/16 SEM 2 ME370 MECHANICAL DESIGN I ME3102 MECHANICAL SYSTEM DESIGN II 11 415/16 SEM 2 ME471 FINITE ELEMENT ANALYSIS 3 ME4291 FINITE ELEMENT ANALYSIS 12 415/16 SEM 2 GE422 ROBOT DYNAMICS AND CONTROL ME4245 ROBOT DYNAMICS AND CONTROL 12 414/15 SEM 2 AE312 COMPRESSIBLE FLUID FLOW I 3 ME3232 COMPRESSIBLE FLOW 12 413/14 SEM 2 AE323 APPLIED AEROSPACE STRUCTURES 3 ME4212 AIRCRAFT STRUCTURES 12 413/14 SEM 2 TAM412 INTERMEDIATE DYNAMICS 4 ME3112 MECHANICS OF MACHINES 11 4

16/17 SEM 2 MAE342 MECHANICAL DESIGN II ME3103 MECHANICAL SYSTEMS DESIGN 11 6 TO COMPENSATE FOR SHORTFALL OF 10 CONTACT HOURS16/17 SEM 2 MAE371 AERODYNAMICS ME4231 AERODYNAMICS AND PROPULSION 12 416/17 SEM 2 MAE415 AUTOMATIC CONTROL ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 MAE310 HEAT TRANSFER ME3122 HEAT TRANSFER 11 416/17 SEM 2 MAE470 INTRODUCTION TO AEROSPACE STRUCTURES ME4212 AIRCRAFT STRUCTURES 12 4

16/17 SEM 2 MEMS1015 RIGID-BODY DYNAMICS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 MEMS1014 DYNAMICS SYSTEMS ME2142 FEEDBACK CONTROL SYSTEMS 11 416/17 SEM 2 *MEMS1043 *SENIOR DESIGN PROJECT ME3103 MECHANICAL SYSTEMS DESIGN 11 616/17 SEM 2 MEMS1020 MECHANICAL VIBRATIONS ME4213 VIBRATION THEORY AND APPLICATIONS 12 414/15 SEM 2 BIOENG 2810 BIOMATRL & BIOCOMPATIBILITY 3 ME4253 BIOMATERIALS ENGINEERING 12 4

14/15 SEM 2 ME2055 COMPUTER ANAL TRANSPORT PHENOMNA ME4233 COMPUTATIONAL METHODS IN FLUID MECHANIC 12 4

14/15 SEM 2 ENGR 1050 PRODUCT REALIZATION 3 ME4263 FUNDAMENTALS OF PRODUCT DEVELOPMENT 12 4

13/14 SEM 2 BME430 BIOLOGICAL INTERACTIONS WITH MATERIALS ME4253 BIOMATERIALS ENGINEERING 12 4

16/17 SEM 2 ME2190 DYNAMICS ME3112 MECHANICS OF MACHINES 11 416/17 SEM 2 ME3248 HEAT TRANSFER ME3122 HEAT TRANSFER 11 4

UNIVERSITY OF MIAMI

UNIVERSITY OF WISCONSIN, MADISON

UNIVERSITY OF ILLINOIS AT URBANA-CHAMPAIGN

UNIVERSITY OF WISCONSIN, MADISON

UNIVERSITY OF PITTSBURGH


Documents

ME SEP Module Mapping Reference-Sem 1& 2me.nus.edu.sg/.../2017/02/ME-SEP-Module-Mapping-Reference-Sem-1-2.pdfME SEP Module Mapping Reference for Summer ... 14/15 SEM 2 MATS4004 FRACTURE