Upload
others
View
13
Download
0
Embed Size (px)
Citation preview
1 2 3 4
A
B
C
D
B
C
A
E
D
41 2 3
Order NumberISO2768-MK/ISO13920-BE Project
Title/Description
Tol.
Reference ModelDrawn
Appr.
Sign.Date Weight (kg)
Comment
Drawing number
Scale
Rev
Sheet
1/1
First angle projection
Product
Article Number
Shee
t for
mat
A4
1:1 F
Mast Attachment
MD45 & MD60
MD45 & MD60, for anchoring and blast holes
Remote control
MD45 Technical data
Drilling MastMast weight 1200 kg
Mast total length 4.800 mm
Recommended Excavator 16 - 30 ton
Feeding push force 2.500 daN
Feeding pull force 2.500 daN
Feeding stroke 4.200 mm
Lateral slewing 360°
Feeding speed 0 - 0,5 m/s
Clamp table
Min. clamp diam. 40 mm
Max. clamp diam. 250 mm
Clamp force 12.000 daN
Break out torque 4.000 daNm
Standard Top Hammer for blast hole drilling
Model Doofor DF550L
Weight 152 kg
Rotation speed 100 - 250 Rpm
Torque (160 cm3@210bar)
975 Nm
Percussion power 17 kW
Shank adaptor R32, R38, T38 (std), T45
Standard Top Hammer for foundation drilling
Model Eurodrill HD2004
Weight 210 kg
Rotation speed 144 rpm
Torque 440 daNm
Stroke Impact < 320 Nm
Frequency < 2.500 bpm
Shank adaptor H64 L/R
MD60 Technical data
Drilling MastMast weight 1300 kg
Mast total length 6.800 mm
Recommended Excavator 18 - 30 ton
Feeding push force 2.500 daN
Feeding pull force 2.500 daN
Feeding stroke 6.200 mm
Lateral slewing 360°
Feeding speed 0 - 0,5 m/s
Clamp table
Min. clamp diam. 40 mm
Max. clamp diam. 250 mm
Clamp force 12.000 daN
Break out torque 4.000 daNm
Standard Top Hammer for blast hole drilling
Model Doofor DF550L
Weight 152 kg
Rotation speed 100 - 250 Rpm
Torque (160 cm3@210bar)
975 Nm
Percussion power 17 kW
Shank adaptor R32, R38, T38 (std), T45
Standard Top Hammer for foundation drilling
Model Eurodrill HD2004
Weight 210 kg
Rotation speed 144 rpm
Torque 440 daNm
Stroke Impact < 320 Nm
Frequency < 2.500 bpm
Shank adaptor H64 L/R
The remote system has potentiometers for rotation speed, rotation torque, and hammer -freqencyIntegrated drilling start-automatics,and drilling automatics (anti jamming)
Mast attachment
MD45 & MD60, for anchoring and blast holes “Flexibility when at it´s best”
The mast could be used as a blast hole drilling mast or a foundation mast.
For foundation drilling SPD mounts Eurodrill top hammers as first choicefor anchoring, bolting or soil nailing etc.
For blast hole drilling SPD mounts top hammers from finnish Doofor as first choice.
Other brands could be mounted for anadditional cost.
MD45 och MD60 has SPD´s standardboltflange on a 45 degree console, wherethe machine conection should be bolted on, with other words you could switch the mast between your different excavators.
The mast tilting is a Heavy Duty type together with an IMO slew drive, for tilting angles up to 360 degrees.
As option an oil lubricator could be mounted on the mast for the top hammerlubrication, but it is recommended to have it mounted at the compressor, or on the carrier.
The mast has a Heavy Duty type clamp table mounted, together with a centralizer, with a through hole of 140 mm.
The cylinders are used for holding the drillstring while breaking out the joints.
Below the clamps there is a dustcollector mounted. A rubber sealing is also avail-able to mount on to the collector.
Mast attachment
HD 2002 HD 2004
Hydraulikhämmer Hydraulic Drifters
HD 1001 HD 1002
Hydraulikhämmer Hydraulic Drifters
Choice of top hammers for foundation Overview
Mast attachment
HD 2002 HD 2004
Hydraulikhämmer Hydraulic Drifters
Choice of top hammers for foundation Overview
E
C
D
F
1 2 3 4
A
321 5
C
D
4 6 7 8
A
B
Shee
t for
mat
A3
Order NumberISO2768-MK/ISO13920-BE
Under ProgressProject
Title/Description
210-MD45
2014-07-16
Tol.
Reference ModelDrawn
Appr.
Sign.Date Weight (kg)
Comment
Drawing number
Scale
Rev
Sheet
1/3
First angle projection
Product
Article Number
1:100Alf
E
B
F
C
D
F
1 2 3 4
A
321 5
C
D
4 6 7 8
A
B
Shee
t for
mat
A3
Order NumberISO2768-MK/ISO13920-BE
Under ProgressProject
Title/Description
210-MD45
2014-07-16
Tol.
Reference ModelDrawn
Appr.
Sign.Date Weight (kg)
Comment
Drawing number
Scale
Rev
Sheet
1/1
First angle projection
Product
Article Number
1:100Alf
H H
F
1 2 3 4
A
321 5
C
D
4 6 7 8
A
B
Shee
t for
mat
A3
Order NumberISO2768-MK/ISO13920-BE
Under ProgressProject
Title/Description
210-MD45
2014-07-16
Tol.
Reference ModelDrawn
Appr.
Sign.Date Weight (kg)
Comment
Drawing number
Scale
Rev
Sheet
3/3
First angle projection
Product
Article Number
1:70Alf
360°
Scandinavian Pile Driving ABFridhemsgatan 16, 733 39 Sala, Sweden
Telefon +46 (0)224 138 10Mobiltelefon +46 (0)70 545 45 27
www.spd.se
All technical data can be subject to change without notice
Dealer stamp