The Munitions Capable BRAT tests smart weapons systems. It initiates Built-In-Test (BIT), provides BIT status, and uploads/downloads and verifies applicable software, including mission planning data resident in the smart weapon. MCBRAT® is designed for operation in harsh flight line environments.

MCBRAT® is compatible with MIL-STD-1760 Class II interface and links with the weapon via a common MIL-STD-1760 connector. MCBRAT® consists of:

• A ruggedized and self-contained laptop computer controller

• Serial RS-232 Communications• Serial RS-422 Communications• MIL-STD-1553 Interface• PCMCIA Interface (external accessible) • Test Adapter Unit (TAU)• MIL-STD-1760 Class II Port• Self-Test Wraparound Port • Interconnecting cables, transit cases

MCBRAT® is compatible with:Joint Direct Attack Munition (JDAM), Joint Standoff Weapon (JSOW), Wind Corrected Munitions Dispenser (WCMD), Joint Air-to-Surface Standoff Missile (JASSM), Standoff Land Attack Missile Expanded Response (SLAM-ER), Hard Target Smart Fuze (HTSF), Miniature Air Launched Decoy (MALD), Paveway, AGM-142, and AIM-9X missile.

Advanced Testing Technologies, Inc.

029 Rev A 10-8-14

MCBRAT®

ATTI Company ProfileThe corporation:• Has designed, developed and manufactured ATE since 1987• Has delivered and supported many test systems in both the commercial and military sectors• Is an innovator in developing and implementing VXI technology solutions• Has developed over one thousand test program sets, covering the test spectrum from simple to extremely complex• Has numerous satisfied customers, including:- Agusta, Italy - Lockheed Martin- Boeing - NATO- Esdas, Turkey - Northrop Grumman- Havelsan, Turkey - Palomar Products, Inc.- Hellenic Air Force - Royal Saudi Air Force- Japanese Air Force - US Air Force- KLM Royal Dutch Airlines - US Navy

ATTI Worldwide SupportThe corporation:• Has developed Obsolescence Mitigation Replacement (OMR) technology which represents ATTI's corporate commitment to customer use and TPS investment in our test systems• Has delivered BRAT test systems worldwide• Offers one of the most experienced service, training and support teams in the world• Has worked with our customers solving diverse test challenges in digital, analog, and RF applications• Is committed to total hardware and software support including service, spares, upgrades, documentation, training, and configuration control• Has the financial efficacy to guarantee long-term commitments

ATTI OfficesCorporate Headquarters 110 Ricefield Lane, Hauppauge, NY 11788,phone: (631) 231-8777, 1-800-ATTI-VXI, fax: (631) 231-7174www.attinet.com

Field Offices

Warner Robins, GA 127 Osigian Blvd., Warner Robins, GA 31088 phone: (478) 953-6356, fax: (478) 953-6494

Oklahoma City, OK 4600 SE 29th Street, Suite 530, Del City, OK 73115 phone: (405) 670-0384, fax: (405) 670-0388

Layton, UT 2985 N 935 E, Suite 1, Layton, UT 84041 phone: (801) 771-7259

Options

Remote Terminal OperationFeatures• Place your keyboard, monitor, and mouse up to 1000 feet (304.8 m)

from a CPU or ServSwitch.• Use a single inexpensive CAT5 UTP cable!• Capable of 1600 x 1280 at 200 feet (60.9 m), 1280 x 1024 at 300 feet

(91.4 m), or 1024 x 768 at 1000 feet (304.8 m).

Video

FeaturesSome of the features of the Programmable Video Generator and Analyzer are as follows:• Four video functions integrated into a single slot, ‘C’ sized, register-

based VXI instrument• All functions completely autonomous• Compatible with both analog and digital video systems• Sophisticated control structure provides the ability to simulate

dynamic and interactive displays• Automatic run time alignment of all analog parameters• Separate programmable clocks (0.25% resolution) for each function• User programmable timing pulses for internal/external

synchronization• Comprehensive API interfaces directly with TBasic or other high level

languages• Can operate as a 3 Channel Function Generator as well as an

Acquisition System• Plug & Play compatible• Standard video programming simplified with predefined macros• Video acquisition mode interfaces directly to the ATTI Virtual

Spectrum Analyzer software package for visual image analysis• Built-in test• Turnkey operation

REV: 11-20-03

Dual-Access Application (ACU1008A)

CAT5 KVM Extender withSerial Extension Load Unit

CAT5 KVM Extender withSerial Extension, Remote Unit

CPU KEYBOARD, Monitor, and Mouse

KEYBOARD, Monitor, and Mouse

Category 5 UnshieldedBulk Cable (EYN842A)

Serial Printer, Touch Screen,or other Serial Device

• Processor:Intel Mobile Pentium- III 750MHz • Memory:Support 3.3V Sync DRAM 256MB, one 144 pins SO-DIMM for expansion • Display:12.1” LCD display with touch screen panel and well suited rubber damper for shock/drop resistance • Hardisk:Removable HDD, 2.5", Ultra DMA support, 20 GB or higher

Specifications:Processor: Intel Mobile Pentium-III 750MHz Memory: Support 3.3V Sync DRAMCache: 256KB on die BIOS: Systemsoft flash BIOS Storage: Removable 20GB HDD with shock resistance damper, support Ultra DMA, 2.5" / 9.5 mm heightRemovable CDRW VGA: 32-bit PCI bus, 8 MB video memory AGP 2XMotionComp capability, support hardware aid for DVD playbackSupports Dual View function LCD/ CRT simultaneous display capability1600 x 1200 x 32bpp maximum resolution for single CRTDisplay: 12.1” LCD touch screen– sunlight readableKeyboard: 87-key, shower-proof and dust-proof Win95 rubber keyboard with backlight Pointing device: Shower-proof and dust-proof pressure sensitive touch padI/O ports: One RS-232C serial portOne parallel port , support EPP/ECPOne USB port One IEEE 1394 port One external CRT monitor port One PS/2 keyboard/mouse portOne FIR port,ASK and IrDA compliantOne 200-pin expansion unit port One 80-pin port replicator port Shock-mounted case Operating System: Windows 98 SE Communication: 56K modem/100 Base-T Ethernet module

PCMCIA: Two type-II or one type-III PCMCIA slots, support ZV-port; CardBus functionAudio System: Supports PCI 3D Audio Soundblaster Pro compatibleBuilt-in dual stereo speakers (waterproof )Expansion: 1553B and 1760A PCI augmentationPCI-MXI2 augmentationBattery: Removable & rechargeable main Li-Ion battery pack (64watts) with the functions of on-line chargeand hot swapPower Intelligent Power Management: Management APM1.2/ACPI compliantAC input 100~240 VAC, 50~60 Hz AC adapter with CP mode, 60 watts DC inputDimension: 310 mm (W) x 255 mm (D) x 122 mm (H)Weight 6.36 KgChassis Sealed magnesium alloy die-castEnvironmental: Temperature: According to IEC 68-2-1, 2, 14 / MIL-STD-810E, Method 501.3, 502.3Operating: -20° C to +50° C (Tested)Non-operating: -40° C to +70° C (Tested) Humidity: According to IEC 68-2-30 / MIL-STD-810E, Method 507.3 5 % to 95 % RH, non-condensing Altitude: According to IEC 68-2-13 / MIL-STD-810E, Method 500.3 Operating: 15,000 ft Non-operating: 40,000 ft, altitude change rate : 2,000 ft/minShock: According to IEC 68-2-27 / MIL-STD-810E, Method 516.4 Operating: 15 g, 11 ms, half sine waveNon-operating: 50 g, 11 ms, half sine wave Vibration: According to IEC 68-2-6 / MIL-STD-810E, Method 514.4 Operating: 10-50 Hz, 0.075 mm / 55-500 Hz 1.0 g Non-operating: 10-50 Hz, 0.15 mm / 55-500 Hz 2.0 g Drop: According to IEC 68-2-32 / MIL-STD-810E , Method 516.4 -3 feet height free drop; survive (test surface: concrete) for basic unit only Enclosure class (Rain & Dust): According to IEC 529, NEMA, MIL-STD-810E, Method 506.3, 510.3 -IP 54 / NEMA 12Regulation: EMI: FCC part 15, Subpart B, Class BApproval: Safety: UL, CUL, TUV -CE marking

Additional Computer Options:Option C-01 13.3" LCD (Sunlight Readable, but not Touch Screen )Option C-02 Upgrade CPU to Pentium PIII / 850 MHzOption C-03 Upgrade RAM to 512 MBOption C-04 Upgrade HDD to 30 GBOption C-05 Upgrade HDD to 40 GBOption C-06 2ND Bay 1 Battery PackOption C-07 DVD-ROM Module 8xOption C-08 Removable 2ND HDD in Bay 1, 10 GBOption C-09 Two type-II or one type-III PCMCIA slots (in Bay 2)Option C-10 Bay 2 RS232 moduleOption C-11 Bay 2 RS422 moduleOption C-12 Bay 2 RS485 moduleOption C-13 Bay 2 SCSI moduleOption C-14 DGPS with mouse type antennaOption C-15 Bay 2 battery pack

Ruggedized Computer

REV: 11-20-03

Function SpecificationDC Voltage Range: 100mv to 300 V in decade stepsResolution: 6 1/2 digitsAccuracy: 90 days Room Temperature 100mv Range - (0.005% of Reading + 0.003% Full Scale) 1 Volt Range - (0.004% of Reading + 0.003% Full Scale) 10 Volt Range - (0.005% of Reading + 0.003% Full Scale) 100 Volt Range - (0.005% of Reading + 0.003% Full Scale) 300 Volt Range - (0.005% of Reading + 0.003% Full Scale)Reading Rate: 6.5 Readings/sec at 6 1/2 digits to 2000 Rdgs/sec at 4 1/2 digitsAC True RMS Voltage Range: 100mv to 300 V in decade stepsResolution: 5 1/2 digits, 100 mVAccuracy: 90 days Room Temperature for signals >1% of Full Scale 200Hz-10KHz Range - 0.08% of Reading + 0.15% of F.S. 10-50KHz Range - 0.23% of Reading + 0.15% F.S. 50-100KHz Range - 0.7% of Reading + 0.25% F.S. 100-300KHz Range - 4.0% of Reading + 0.6% F.S.Accuracy: (1-300 Volt Ranges) 200Hz-10KHz Range - 0.05% of Reading + 0.03% of F.S. 10-50KHz Range - 0.1% of Reading + 0.05% F.S. 50-100KHz Range - 0.4% of Reading + 0.15% F.S. 100-300KHz Range - 4.0% of Reading + 0.6% F.S.Reading Rate: 45 Reading per second @ 5 1/2 digitsCMRR: >70dBc from 1 to 60 HzCrest Factor: 5:1 states that signals with harmonics (e.g. pulses = sinx/x)Resistance Range: 100Ω to 10 MΩ in decade stepsResolution: 6 1/2 digitsAccuracy: 90 days (Room Temperature) 20Ω Range - 0.005% of Reading + 0.008% of F.S. 200Ω Range - 0.005% of Reading + 0.008% of F.S. 2KΩ Range - 0.005% of Reading + 0.002% of F.S. 20KΩ Range - 0.005% of Reading + 0.003% of F.S. 2MegΩ Range - 0.01% of Reading + 0.003% of F.S. 20MegΩ Range - 0.02% of Reading + 0.003% of F.S.Reading Rate: 45 Reading per second @ 5 1/2 digitsDC Current Range: 10 mA to 1 mA in decade stepsResolution: 6 1/2 digitsAccuracy: 90 days (Room Temperature) 10 mA Range - 0.015% of Reading + 0.01% of F.S. 100 mA Range - 0.015% of Reading + 0.004% of F.S. 1 A Range - 0.05% of Reading + 0.01% of F.S.AC True RMS Current Range: 10 mA to 1 A in decade stepsResolution: 5 1/2 digits, 10 mA - 1 AAccuracy: 90 days (Room Temperature) for signals >1% of Full Scale 20Hz-50Hz Range - 1.1% of Reading + 0.2% of F.S. 50-200Hz Range - 0.3% of Reading + 0.2% F.S. 200Hz-10KHz Range - 0.15% of Reading + 0.2% F.S.

Digital Multimeter

3 Channel Function Generator

1 Channel Waveform Generator

Universal Counter-TimerFunction SpecificationFrequency Range 500 µHz to 200 MHz Resolution: 9 digits, 10 digits averagedPeriod Range: 5 nanoseconds to 2000 seconds Resolution: 1 nanosecond; 9 digits/sec max, 10 digits averageTime Interval Range: 2 nanosecond to 106 sec Resolution: 1 nanosecondTotalize 0 to 1010 eventsRise & Fall Time Range: 10 nanoseconds to 1000 seconds Resolution: 1 nanosecondPulse Width Range: 5 nanoseconds to 20 milliseconds Resolution: 1 nanosecondVoltages Range: 50 V, 5 V (1 MΩ) Coupling: AC or DC

Impedance: 50Ω or 1MegΩ @ 10pF Attenuation: X1, X10 Hysteresis: Programmable Low Pass Filter: <50 KHz Sensitivity: 20 mV RMS - 50 MHzExternal Arm Input Pulse Width: >50 nanoseconds Voltage Range: TTL or ECL

Waveforms Sine, Triangle, Square, Pulse, Sinc, Gaussian, Exponential, Positive/Negative Ramp, Noise & Arbitrary (User defined) Frequency Resolution: 8 digits for sine and square waves (5 digits all others) Frequency Range: Sine (0.1Hz to 20 MHz) Amplitude: +/- 10 V into >200Ω +/- 6 V into 50Ω Accuracy: 1% Output Impedance: 50Ω

Amplitude CharacteristicsAmplitude (Hi outputs) 20mV-10Vpk-pk, output open circuit 10mV-5Vpk-pk, into 50ΩAmplitude (Lo outputs, chs. 2&3): 1Vpk-pk, into 50ΩResolution: 3.5 digitsAccuracy (at 1kHz): ±1%DC Offset Range: 0 to ± 4.5VDC Offset Accuracy: ±1%Output Impedance: 50Ω ±1%Low-Pass Filters (selectable) Chan. 1: 25MHz, 50MHz, 7-pole Chan. 2: 12.5MHz, 25MHz, 7-pole Chan. 3: 250kHz, 25MHz, 7-poleStandby: (Output Disconnected)Output: On or OffOutput Protection: Short circuit

SineFrequency RangeCh. 1: 10mHz to 50MHzChs. 2&3: 10mHz to 6.25MHz, usable to 25MHzStart Phase Range: 0-360Total Harmonic Distortion (max vertical and horizontal resolution): 0.3%Harmonics and Spurious (max vertical and horizontal resolution)Frequency High Output Low-Level Output <10MHz <-35dBc N/A <5MHz <-40dBc <-45dBc <1MHz <-55dBc <-60dBcIn-Band Spurious and Non-Harmonic (Ch. 1 @ 40MHz, Chs. 2&3 @ 20MHz)Amplitude Ch. 1 Chs. 2&3 •5Vpk-pk <-22dBc <-25dBc •10Vpk-pk <-8dBc <-15dBcTwo Tone Intermodulation (Ch. 1 @ 23.1 & 24.1MHz, Chs. 2&3 @ 12.1 & 13.1MHz)Amplitude Ch. 1 Chs. 2&3 •5Vpk-pk <-35dBc <-35dBc •10Vpk-pk <-25dBc <-30dBc

REV: 11-20-03

Dc Power Supply Specifications

AC Power Control and Distribution

Power and Control System

Monitors 3-phase AC power, provides automatic sequenced shut down for system protection. In addition, provides AC and DC power distribution to instrument system and allows for external interrupts which will remove power sequentially and orderly.

Thermostat-controlled heaters and cooling assembly mounted on rear of transit case (not shown).

Programmable AC SuppliesOutput Voltage Output Current Number of Channels Output Resolution Ripple and Noise Load Regulation

+/-100 Vpk 0.1 A <= 15 KHz 12 Bits 60 mVrms* +/- 1%

+/-65 Vpk 0.1 A <= 75 KHz 12 Bits 60 mVrms* +/- 1%

* 60 mVrms for 70.7 Vrms signal (<= 40 dBc)

Programmable Regulated DC Supplies (Switched)Output Voltage Output Current Number of Channels Output Resolution Ripple and Noise Load Regulation

+/-15 V 0.1 A 5 12 Bits 10 mVpk +/- 0.1% + 3 mV

Fixed Regulated DC Supplies (Switched) Output Voltage Output Current Number of Channels Ripple and Noise Load Regulation

+28 V 20 A 10 280 mV pk-pk 224 mV

+28 V 3.6 A 10 280 mV pk-pk 224 mV

+20 V 0.1 A 1 280 mV pk-pk 224 mV

-28 V 3.6 A 1 280 mV pk-pk 224 mV

+15 V 0.1 A 1 10 mVpk +/- 0.1% + 3 mV

+5 V 0.1 A 1 10 mVpk +/- 0.1% + 3 mV

+100 V 0.1 A 1 100 mV pk-pk 500 mV

REV: 11-20-03

Programmable Loads

Digitizer

Function SpecificationResistive (Low Current) Range: 0.5 to 1.5 MΩ; 0-200 V / 0.5 A / 5 W Accuracy: ≤ 0.25% Resolution: 0.1ΩElectronic (High Current) Channels: 10 Max. Power: 100 W Current: 0 - 10 A Programmable Voltage: 0 -150 V

Analog Input Bandwidth DC to 100 MHz Signal Range ±0.5 V to ±25 V (programmable) Input Impedance 50 Ω or 1 MΩ (programmable) Input Coupling DC or AC (programmable) Connector BNCDigitizer Number of Channels: 2 Sample Rate 10 to 200 MSamples/s (programmable) Resolution 8 Bits Record Length 4 Msample per Channel Signal-to-Noise + Distortion 43 dB @ fIN = 30 MHz Effective Bits 6.85 @ fIN = 30 MHzTrigger Function Input or Output (programmable) Trigger Source Front Panel, TTLTRGn, ELCTRGn, Software (programmable) Trigger Edge Rising or Falling (programmable) Triggering Modes Pre-Trigger and Post-Trigger Acquisition (programmable) Input Trigger Level -5 V to +5V (programmable) Front-Panel Trigger Input 10 kΩ Input Impedance, SMB Connector Front-Panel Trigger Output TTL Compatible into 50 Ω, SMB ConnectorClock Reference Clock Source Internal, External or VXI Backplane

SwitchingFeatures2 (8 x 88) switch matrices (>1 MHz BandWidth)1 (4 x 4) > 1 GHz1 (4 x 64) >50 MHz1 (8 x 16) >45 MHz1 (4 x 4) >45 MHz>547 total pins for systemUndedicated Switching1 (1 x 18) >20 MHz1 (1 x 60) >50 MHz

Environmental ControlsThermostatic control heaters and cooling assemblies at rear are not shown

SquareFrequency Range Ch. 1: 10mHz to 50MHz Chs. 2&3: 10mHz to 25MHzDuty Cycle Range: 0% to 99.9%Rise/Fall Time: (10%-90%) <17nsAberration: <7%+10mV

TriangleFrequency Range10mHz to 1MHz, usable >1MHzStart Phase Range: 0-360Pulse and Ramp FunctionsFrequency Range: 10mHz to 1MHz, usable >1MHzDelay, Rise/Fall Time, High Time Ranges: 0%-99.9% of period (each independently)Gaussian Pulse Time Constant Range: 10-200Sinc Pulse “Zero Crossings” Range: 4-100Exponential Pulse Time Constant Range: -100 to 100DC Output Function Range: -100% to 100% of amplitude

Trigger CharacteristicsInput Sources Internal: 1mHz-50kHz timer (1) Accuracy: ±(1%+1s)External: Front Panel SMB (3)VXI Backplane: TTLTrg0-3, ECLTrg0Software: *TRG, WS Trigger Cmd.Trigger Start PhaseRange: 0 to Number of points (0 to 360)Resolution: 4 pointsJitter: 1 clock cyclePulse Width: 20ns, min.Slope: + or -, selectableTrigger Level (Ch. 1) Range: ±10VResolution: 50mVTrigger Level (Chs. 2&3): TTLInput Frequency Range: DC to 12.5MHzSync Out: Front Panel: BNC VXI Backplane: TTLTrg0-3, ECLTrg0Trigger Out: VXI Backplane: TTLTrg4-6 (Chs. 1-3)Sync/Trigger Width: 4 to 800 points, programmableSync/Trigger Out Sources: BIT: Selected point in segment. LCOM: Loop complete. SREP: Start of each segment repetition within a sequence. SEG: Start of each segment within a sequence.Sync Delay: Programmable in points System Delay (trigger I/P to waveform O/P) Separate: 1 sample clock cycle+150ns Synchronized: 2 slowest sample clock cycles+150ns

REV: 11-20-03

Digital (continued)Features (optional)

+7 to -5V I/O Modules

Feature SR214

Bi-directional I/O Channels 16

Memory Depth 128K

Realtime Compare yes

Max. Data Rate 25 MHz*

Skew <5ns

Data Formats (RTO,RTZ,RTC,NR) yes

Algorithmic Data Generation yes

Multiplex Mode yes

Serial Mode yes

*May be operated up to 50 MHz in 8 channel multiplexed mode

+/- 15V I/O Modules

Feature SR106

Bi-directional I/O Channels* 16*

Memory Depth 128K

Realtime Compare n/a

Max. Data Rate Static

Skew <5ns

Data Formats (RTO,RTZ,RTC,NR) -

Algorithmic Data Generation -

Multiplex Mode -

Serial Mode -

*Provides eight +/- 15V and eight TTL driver/receivers

Differential I/O Modules

Feature SR122 SR123

Bi-directional I/O Channels 8 8

Memory Depth 128K 128K

Realtime Compare yes n/a

Max. Data Rate 25 MHz 25 MHz*

Skew <5ns <5ns

Data Formats (RTO,RTZ,RTC,NR) yes yes

Algorithmic Data Generation yes yes

Multiplex Mode yes yes

Serial Mode yes yes

* May be operated up to 50 MHz in multiplexed mode

Digital

Discretes10 Channels 28 V / Open10 Channels Gnd. / OpenFixed Regulated DC SuppliesSwitched+28 V @ 20 A 10 Channels+28 V @ 3.6 A 10 Channels+20 V @ .1 A 1 Channel-28 V @ 3.6 A 1 Channel+100 V @ .1 A 1 Channel+15 V @ .1 A 1 Channel+5 V @ .1 A 1 ChannelProgrammable Reg. DC PSSwitched+/- 15 V Reg. 12 Bits .1 A 5 Channels

Programmable AC+/- 100 V peak @ ≤ 5 KHz- 100 mA+/- 65 V peak @ ≤75 KHz- 100 mA

Features (standard)6 channels of Bi-directional I/O with 16 driver/receivers per channelMemory depth 128KRealtime Compare yesMax. Data Rate 25 Mhz*Skew <5nsData Formats (RTO,RTZ,RTC,NR) yesAlgorithmic Data Generation yesMultiplex Mode yesSerial Mode yes* May be operated up to 50Mhz in 8 channel multiplexed mode

Analog OutputCharacteristicsNumber of Channels: 8Scan Rate16 Channels: >2.7 kHz8 Channels: >4.7 kHz1 Channel: >14 kHzResolution: 12 bitsAccuracy: (23° C ± 5° C)Standard: ±(0.1% FSR + 0.3 mV)

Analog InputCharacteristicsNumber of Channels: 8Scan Rate16 Channels: >2.5 kHz8 Channels: >4.3 kHz1 Channel: >11 kHzResolution: 12 bitsAccuracy (23° C ± 5° C)

Analog Input (continued)Characteristics±10 V Range: ±0.1% FSRAll Other Ranges: ±0.15%FSRRanges1 V, 5 V, 10 V, ±1 V, ±5 V, ±10 V

Digital I/OCharacteristicsTypesStandard: Current Receiver Inputs,Open Collector OutputsNumber of ChannelsStandard: 16 Input, 16 OutputOption 2: 32 Input/Output(Software Configurable)Scan Rate16 Channels: >2.7 kHz8 Channels: >5 kHz1 Channel: >16.6 kHz

TTL I/O Modules

Feature SR115

Bi-directional I/O Channels 16

Memory Depth 128K

Realtime Compare yes

Max. Data Rate 25 MHz*

Skew <5ns

Data Formats (RTO,RTZ,RTC,NR) yes

Algorithmic Data Generation yes

Multiplex Mode yes

Serial Mode yes

* May be operated up to 50 MHz in multiplexed mode

REV: 11-20-03