Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
01 / 2019, Signify Holding. All rights reserved
4MX850
Maxos LEDGeneral Lighting
Not included
50
782
1462
A
63
indoor 50Hz60Hz
220V240V IP20LEDs
GLOWWIRE
650 °C
Max.35 °CMin.
-20 °C
©4443 160 16476 - 01
LEDsType A
kg
4MX8504MX8664MX883
CCT
830/840/850/86540S/55S/66S/80S1478 1.80491
1528 1.85581
Printed in HungaryData subject to change without noticeKeep for future reference: www.philips.com/lighting
!
The light source contained in this luminaireshall only be replaced by the manufacturer or his service agent or a similar quali�ed person.
Service
L
350 - 370 mm
Trunking4MX056 (TL-D) / 4MX656 (TL5)(not included)
1 (2x)
2
3
1 23
350 - 370 mm
CLICK
2x
!
A
A
A
L [mm]
Asymmetric
Emergency Light
350-370
Standard 350-370
60-80
Check suspensiondistances. See pag. 4
1
Trunking
Electricalunit
Mirrorinlay
Louvers
4
3
2
24
2
2
5
5
5
4
3
1
2 1
4
3
3*A
Trunking
Bracket
* Clip (optional)
5
5 4
2
C
A
B
5
4
3
Optic/Raster
1
Optic/Raster
B
2
Electricalunit
L
4.00 X4.00 4.00 X
4,00 m
kgmax. 30
kgmax. 30
Maxos LED4MX850
Trucking4MX056 (TLD) / 4MX656 (TL5)
Coupling piece
2x
!1a
Suspension distances with coupling piece
x = 0.1 - 0.7 m
Check suspension distances.
Type L kg
=
Trucking4MX056 (TLD) / 4MX656 (TL5)
max. 30
kgmax. 30
2x
2x
!
190 - 225 mm
190 - 225 mm
!
kg
A
A A
TL5 / TLD - Trunking Perfomer A20 - PSU
=
190 - 225 mm
190 - 225 mm
A
A
Driver
=
Driver
Driver
kgmax. 30
2x
!
Trucking4MX056 (TLD) / 4MX656 (TL5)
2x
A
A
TL5 / TLD - Trunking Perfomer A20 - PSD
kgmax. 30
Option: DALI C-2R
Disassembly of hook
Mounting of electrical unit
A
Hook
Hook GEALUXTrunking
B
CLICK2x
ConnectorElectrical unit
Electrical unit
Plug connector
ConnectorAdels 160BU/2SOrder-No / Best.-Nr.441250600132
I mains (A)
I nom.
Time (us)Tref
max/2
I max
Inrush current
Given the choices made in this unique lighting concept, there are a few instructions regarding the maintenance.• Prevent water from entering on or in the luminaire at installation and during use of the luminaire• During installation or maintaining the luminaire please use gloves to avoid spots on the cover.• Do not clean with a dry cloth as it will cause the product to attract dust. Dirty spots can be removed: Only dust: use a damped cloth (no dripping water), preferably anti-static. Fingerprints etc: use a damped cloth (no dripping water) with a cleaner approriate for polycarbonate/PMMA plastics• Do not touch electronic components as they are ESD sensitive.• Do not stare into LED beam.• Luminaire should not be used for illumination during building activities.
due to dust accumulation inside the luminaire.
LASER RADIATIONAVOID DIRECT EYE EXPOSURE
CLASS 2M LASER PRODUCT210J/M2/10S 443.533.552nm
wg PN-EN 60825-1 -2005
© 2019 Signify HoldingAll rights reserved. This document contains information relating to the product portfolio of Signify which information may be subject to change. No representation or warranty as to the accuracy or completeness of the information included herein is given and any liability for any action in reliance thereon is disclaimed. The information presented in this document is not intended as any commercial o�er and does not form part of any quotation or contract. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.. All other trademarks are owned by Signify Holding or their respective owners.
Signify Holding.The Netherlands
PSD
Imax (A) 21Tref (µs) 280MCB Drivers Max.B-10 A 14 14B-16 A 24 24C-10 A 24 24C-16 A 40 40
PSU
17,8282