14
MAXIMO MXH Heated Formwork The cost-effective solution for concreting operations at low temperatures Product brochure

MAXIMO MXH Heated Formwork The cost-effective ... - peri.fi258652ae-8568-402d-99d... · For aligning PERI formwork systems and precast concrete elements. Note Permissible load see

  • Upload
    others

  • View
    18

  • Download
    0

Embed Size (px)

Citation preview

MAXIMO MXH Heated FormworkThe cost-effective solution for concreting operations at low temperatures

Product brochure

MAXIMO MXH Heated FormworkThe cost-effective solution for concreting operationsat low temperatures

Especially for markets with colder climates, PERI has developed the MXH Formwork System which can be heated whereby the MAXIMO Wall Formwork System is combined with heating elements. This means that concreting operations can also take place at low temperatures as the hydration process is not affec-ted.

Assembly of the panel formwork and heating elements is carried out hori-zontally; only two mounting bolts are required on the four frame corners

each time. The standard height of the heating elements is 2.70 m with stand-ard widths of 2.40 m and 1.20 m. Corresponding extension elements and practical details such as suitable box outs for the BFD Couplers as well as for connecting the bracket system MXK ensure efficient application of the system. MAXIMO thus provides a further enhanced range of applications in the area of panel formwork with sin-gle-sided operations. The numerous reference customers along with independent time measurements confirm the formwork´s exceptional level of efficiency.

Quickly mountedEasily fixed using only 2 screws in eachof the 4 panel corners

Particularly cost-effectiveSummer and winter utilization with only one formwork system

With innovative tie technologyCan be used with the MX 15 as well asMX 18 anchor systems

Product advantages

2

Panel overview

Product advantages

Combined with a heating element, MAXIMO now also offers the right solu-tion for concreting at low temperatures. By means of the heating control, the set point value can be adjusted from + 20 °C to + 80 °C.

Installation bracket*

Attachment point for Scaffold bracket MXK*

Attachment point for Control box and Tie holder*

Tie point

Attachment point for Ladder strut*

Attachment point for Connector RS MXH*

Notch for electrical connection

Lifting point crane eye

Attachment point for Alignment coupler BFD

Attachment point for Compensation Waler MAR*

*Not available on panels

3

Panel sizes

Standard Heated Panels MXH 270 cm x 240 cm270 cm x 120 cm

Extension Heated Panels MXH

120 cm x 240 cm120 cm x 120 cm 60 cm x 240 cm 60 cm x 120 cm

MXH Heated Formwork

4

Item no. Weight kg

129370 119.000 Extension Heated Panel MXH 120 x 2402.880 m². Extension Heated Panel MXH for Panel MX 120 x 240.

540 1320 540

2400

600

600

1200

199

129133 147.000 Heated Panel MXH 270 x 1203.240 m². Heated Panel for Panel MX 270 x 120.

600 600

1200

600

1500

600

2700

221100

129132 233.000 Heated Panel MXH 270 x 2406.480 m². Heated Panel for Panel MX 270 x 240.

540 1320 540

2400

600

1500

2700

221

600

100

MXH Heated Formwork

5

Item no. Weight kg

129139 3.440 Adapter Connector MXH

150

150 186

117990 0.132 Fixing Bolt M14 MXH

93

M 14

129135 44.000 Extension Heated Panel MXH 60 x 1200.720 m². Extension Heated Panel MXH for Panel MX 120 x 60.

300

300 60

0

600600

1200

199

129134 72.400 Extension Heated Panel MXH 60 x 2401.440 m². Extension Heated Panel MXH for Panel MX 60 x 240.

540 1320 540

2400

300

300 60

0

199

129375 73.400 Extension Heated Panel MXH 120 x 1201.440 m². Extension Heated Panel MXH for Panel MX 120 x 120.

600

600

600 600

1200

1200

199

MXH Heated Formwork

6

Item no. Weight kg

128875 0.450 Connecting Cable MXHPower supply cable for connection between MXH Panels and MXH Extension Heated Panels.

128874 0.755 Connector Cable MXHPower supply cable for Control Box MXH to MXH Panel.

129330 19.100 Control Box MXH Complete with1 pc. 129137 Control Box Connector MXHNoteFollow Instructions for Use!

947

483 283

129137 5.590AccessoriesControl Box Connector MXH

129136 3.260 Connector RS MXHFor connecting push-pull props and kicker braces on MXH Panels.

126

233

211

MXH Heated Formwork

7

Item no. Weight kg

117466 10.600 Push-Pull Prop RS 210, galv.Extension length l = 1.30 – 2.10 m.For aligning PERI formwork systems and precast concrete elements.

NotePermissible load see PERI Design Tables.

1300min max 2100

Ø21

1178

60,6

Ø

9

Ø17

Ø48,3

115168 7.470 Lifting Hook MAXIMO 1.5 tFor transporting MAXIMO and TRIO Panels.

NoteFollow Instructions for Use!Technical DataPermissible load-bearing capacity:Steel elements 1.5 tAlu elements 750 kg

60 110

218

110

332

58

185

117321 31.000 Lifting Gear Combi MXFor transporting stacks of MAXIMO and TRIOPanels. For attaching Lifting Hook MAXIMO 1.5 t and Stacking Device MAXIMO.

NoteFollow Instructions for Use!

.

129141 8.430 Tie Holder MXHParking position of MX Anchors on MXH Panels.

947

1050 256

MXH Heated Formwork

8

Item no. Weight kg

117469 40.000 Push-Pull Prop RS 650, galv.Extension length l = 4.30 – 6.50 m.For aligning PERI formwork systems and precast concrete elements.

NotePermissible load see PERI Design Tables.

4300min max 6500

88,9

Ø4140

Ø21

Ø48,3

Ø17

117468 23.000 Push-Pull Prop RS 450, galv.Extension length l = 2.80 – 4.50 m.For aligning PERI formwork systems and precast concrete elements.

NotePermissible load see PERI Design Tables.

min 2800 max 4500

2670

73ØØ21

Ø48,3

Ø17

9

117467 15.500 Push-Pull Prop RS 300, galv.Extension length l = 1.90 – 3.00 m.For aligning PERI formwork systems and precast concrete elements.

NotePermissible load see PERI Design Tables.

min 1900 max 3000

1773

64,5

Ø

Ø21

Ø48,3

9

Ø17

118238 12.200 Push-Pull Prop RS 260, galv.Extension length l = 2.30 – 2.60 m.For aligning PERI formwork systems and precast concrete elements.

NotePermissible load see PERI Design Tables.

min 2300 max 2600

60,6

Ø2178

Ø21

9

Ø17

Ø48,3

MXH Heated Formwork

9

Item no. Weight kg

117343 3.250 Base Plate-2 for RS 210 – 1400, galv.For assembly of Push-Pull Props RS 210, 260, 300, 450, 650, 1000 and 1400.

Complete with2 pc. 105400 Pin Ø 20 x 140, galv.2 pc. 018060 Cotter Pin 4/1, galv.

261

106

52

64

Ø21

124777 0.210AccessoriesAnchor Bolt PERI 14/20 x 130

103800 271.000 Push-Pull Prop RS 1400, galv.Extension length l = 6.40 – 14.00 m.For aligning PERI formwork systems.

NotePermissible load see PERI Design Tables. Chain can be operated from bottom.

6400min max 14000

6290

400020 x 200 = 400020 x 200 =

Ø48,3

Ø21 Ø21Ø17

Ø48,3

10

028990 115.000 Push-Pull Prop RS 1000, galv.Extension length l = 6.40 – 10.00 m.For aligning PERI formwork systems.

NotePermissible load see PERI Design Tables.

min 6325 max 10000

10

102

Ø

Ø21

Ø48,3

Ø21

Ø17

MXH Heated Formwork

10

Item no. Weight kg

028020 22.000 Push-Pull Prop RSS IIExtension length l = 2.91 – 3.80 m.For aligning PERI formwork systems.

NotePermissible load see PERI Design Tables.

min 2910 max 3800

Ø16,5Ø16,52775

Ø32

10

70Ø

15

113397 1.600 Spindle Handle RSS / AVSpindle Handle for screwing on Push-Pull-Props RSS I, RSS II, RSS III and Kickers AV 210 and AV 190 complete with 2 bolts and nuts M8.

196

179

130

028010 17.900 Push-Pull Prop RSS IExtension length l = 2.05 – 2.94 m.For aligning PERI formwork systems.

NotePermissible load see PERI Design Tables.

2050min max 2940

1915

Ø16,5

10

Ø32

70Ø

126666 3.070 Base Plate-3 for RS 210 - 1400For assembly of Push-Pull Props RS 210, 260, 300, 450, 650, 1000 and 1400.

Complete with2 pc. 105400 Pin Ø 20 x 140, galv.2 pc. 018060 Cotter Pin 4/1, galv.1 pc. 113063 Bolt ISO 4014 M12 x 80-8.8, galv.1 pc. 113064 Hex Nut ISO7042-M12-8-G, galv.

264

64

52

105

Ø21

124777 0.210AccessoriesAnchor Bolt PERI 14/20 x 130

MXH Heated Formwork

11

Item no. Weight kg

057087057088

3.720 4.410

Kicker AVKicker AV 82Kicker AV 111For aligning PERI formwork systems.

min. L max. L 500 820 790 1110 Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load see PERI Design Tables.

min 790 max 1110min 500 max 820

38Ø

390

10 10

Ø16,5

Ø30

Ø16x42

690

106000 1.820 Base Plate-2 for RSS, galv.For assembly of RSS Push-Pull Props.

Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.

150

Ø21

Ø11

100 1285

124777 0.210AccessoriesAnchor Bolt PERI 14/20 x 130

028030 38.400 Push-Pull Prop RSS IIIExtension length l = 4.60 – 6.00 m.For aligning PERI formwork systems.

NotePermissible load see PERI Design Tables.

min 4600 max 6000

4399Ø16,5 Ø16,5

Ø48,3

915

82,5

Ø

MXH Heated Formwork

12

Item no. Weight kg

028120 17.000 Kicker AV RSS IIIExtension length l = 2.03 – 2.92 m.For aligning PERI formwork systems.

Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load see PERI Design Tables.

min 2030 max 2920

1915Ø16x42 Ø16,5

Ø32

10 10

70Ø

108135 12.900 Kicker AV 210Extension length l = 1.28 – 2.10 m.For aligning PERI formwork systems.

Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load see PERI Design Tables.

min 1280 max 2100

Ø16x42 Ø16,5

Ø36

70Ø

1171

1010

028110 5.180 Kicker AV 140Extension length l = 1.08 – 1.40 m.For aligning PERI formwork systems.

Complete with1 pc. 027170 Pin Ø 16 x 42, galv.1 pc. 018060 Cotter Pin 4/1, galv.NotePermissible load see PERI Design Tables.

min 1080 max 1400

38Ø Ø16x42Ø16,5

Ø30

980

10 10

MXH Heated Formwork

13

Item no. Weight kg124777 0.210 Anchor Bolt PERI 14/20 x 130

For temporary fixation to reinforced concrete structures.

NoteSee PERI data sheet!Drilling Ø 14 mm.

130

SW 24Ø14

DE

en 0

4 | 2

016

3sm

793

982

© P

ER

I Gm

bH

The optimal System for every Project and every Requirement

PERI GmbHFormwork Scaffolding EngineeringRudolf-Diesel-Strasse 1989264 WeissenhornGermanyTel. +49 (0)7309.950- 0Fax +49 (0)7309.951- [email protected]

System-Independent Accessories

Column FormworkWall Formwork Slab Formwork

Climbing Systems Bridge Formwork Tunnel Formwork Shoring Systems

Construction Scaffold Industrial ScaffoldFacade Scaffold Access

Protection Scaffold Safety Systems Services

Important NotesWithout exception, all current safety regulations and guidelines must be observed in those countries where our products are used. The photos shown in this brochure feature construction sites in progress. For this reason, safety and anchor details in particular cannot always be considered as conclusive or final. The information contained herein is subject to tech-nical changes in the interests of progress. Errors and typographical mistakes reserved.