Matsushita FP1-Series Programmable Logic C SUNX,NAIS,MATSUSHITA/PLC...Matsushita FP1-Series Programmable Logic Controllers Content: ... FP1 series Programmable Logic Controllers

  • View
    243

  • Download
    10

Embed Size (px)

Text of Matsushita FP1-Series Programmable Logic C SUNX,NAIS,MATSUSHITA/PLC...Matsushita FP1-Series...

  • Matsushita

    FP1-Series Programmable

    Logic Controllers

    Content: 1998Product Numbers: up-to-date

  • The FP1 Compact Controllerfrom Matsushita is one of themost powerful programmablelogic controllers in its class.The continuous developmentof our proven PLC technologyhas allowed us to offer theperformance of much largersystems in a small compactPLC. Practical application andinnovation has produced a fastand reliable PLC system whichcan solve a wide range of con-trol tasks. Flexible expansionmodules in addition to power-ful local and wide area net-working capabilities open upapplication field not previouslyconsidered possible with thissize of PLC.FPWIN Pro is an advanced pro-gramming software packagedesigned to complement theadvanced features of the FP1system. Five IEC61131-3 stadardizedprogramming languages and astandard addressing structureallow the user to developdetailed application programs.The WINDOWS based userinterface allows flexibilitynever before found with pre-vious packages and lets soft-ware developers operate withmaximum efficiency and costeffectiveness.

    Quality Management andProduct Safety

    ISO90001

    Matsushita, known for deca-des for producing high-qualityindustrial products, has alwaysmade every effort to ensurequality at all stages, fromdesign through production tocustomer service. In order todemonstrate these strict internal quality guidelines toits customers, MatsushitaElectric Works Ltd., Japanalong with its European sub-sidiaries, has been certifiedaccording to ISO9000 for manyyears.

    CE label

    As from 01.01.96 the compo-nents in our FP1 as well as inall other FP series bear the CEmark.

    UL/CSA

    The UL/CSA symbol showsthat Matsushita PLC moduleshave been tested and certifiedas complying with the de-manding safety requirementsof North America.

    Service as well as Quality

    By selecting the FP1 series youhave chosen a flexible andfuture-proof investment. Aswell as strict control of pro-duct quality, Matsushita offersexemplary customer service.Product training courses, structured in accordance withtarget groups, are a keystoneof the overall product concept.And where there are a numberof different ways of implemen-ting your application we willbe glad to advise you.

    Compact yet PowerfulFP1 seriesProgrammable Logic Controllers.

    * Registered trademark of Microsoft 3

  • The FP1, available for applica-tions with as few as 14 I/O,offers many opportunities toquickly and reliably automatemanufacturing, control ormonitoring processes. Due toits very small size, the FP1 canbe installed almost every-where even in mobile applications using the 24 VDCpowered version. The FP1 isnot just an intelligent alterna-tive to simple hard-wired relayor contactor circuits. Instead itis a complete control systemwhich, because of its powerfulyet simple operation, offerssignificant overall cost reductions.

    Some general data:High processing speed,

    1,6 s per logical instruction 32 bit word processingUp to 16 programmable

    subprogrammesRS422 interfaceRS232C interface (from C24)Plug-in screw terminals

    (from C24)Pulse catch inputs from 500 sPulse outputsNetwork capabilityDIN rail mountingUniversal power supplyUniversal software for all

    Matsushita PLCsProgramming languages:

    Ladder logic programming, Instruction list, Function block diagram, Sequential function chart, Structured text

    Programmable using IBM compatible AT PC

    Type description FP1 C14 FP1 C16

    Inputs / Outputs (I /O) 8 / 6 8 / 8Max. number of I /O 54 (14 / 40) 56 (16/ 40)Programme capacity 900 commandsMemory type EEPROMNumber of commandsBasic commands 41Additional commands 85Dimensions (mm) 120 x 81 x 45 / 74 (DC / AC)

    Type description FP1 C24 (C) FP1 C40 (C)

    Inputs / Outputs (I /O) 16/ 8 24/16Max. number of I /O 104 (24 / 40 /40) 120 (40 / 40 / 40)Programme capacity 2720 commandsMemory type RAM Standard, EPROM/

    EEPROM plug-inNumber of commandsBasic commands 80Additional commands 111Dimensions (mm) 190x96x45/74 (DC/AC) 260x96x45/74 (DC/AC)

    Type description FP1 C56 (C) FP1 C72 (C)

    Inputs / Outputs (I /O 32 / 24 40 /32Max. number of I /O 136 (56 / 40 / 40) 152 (72 / 40 / 40)Programme capacity 5000 commandsMemory type RAM Standard, EPROM/

    EEPROM plug-inNumber of commandsBasic commands 81Additional commands 111Dimensions (mm) 260x120x45/74 (DC/AC) 300x120x45/74 (DC/AC)

    Small size High Intelligence.The Basic Controller.

    4

  • All Data.At a glance.

    1. PLC Data.

    2. High Speed Counter.

    3. General Data.

    4. Input Data.

    5. Output Data.

    AC-Version DC-Version

    Supply Voltage 100 to 240 V 24V

    Input VoltageRange 85 to 264 V 20,4 to 26,4V

    Max. Current consumptionC14/ 16 0,2 A at 200V 0,3 A at 24 VC24 0,3 A at 200V 0,4 A at 24 VC40 0,3 A at 200V 0,5 A at 24 VC56 0,4 A at 200V 0,6 A at 24 VC72 0,4 A at 200V 0,6 A at 24 V

    Working temperaturerange 0C to +55 C

    Storage temperature -20 C to + 70 C

    Max. relative humidity 30% to 85% non condensing

    Insulation 100 M (measured with a 500VDC megger testing)Resistance between external terminal and frame ground

    Vibration 10Hz to 55 Hz, 1 cycle/min. with Double amplitude 0,75mmResistance 10min. per axis (x, y, z)

    Shock Resistance min. 98 m/s2, 4x each axis (x, y, z)

    Noise 1000 Vpp with impulse width 50 ns and 1 s sensitivity from noise generator

    Sensor/actuator C14, C16: 110 mApower supply (24 VDC) C24 (C), C40 (C): 230 mA

    C56 (C), C72 (C): 400 mA

    Description

    Counting method 1Channel(On-/Off mode, 2-phase mode)

    Counting range from -8.388.608 to 8.388.607

    Max. On-/Off mode: 10kHzCounting speed 2-phase mode: 5kHz

    6

    Input Voltage 10.2 to 26.4 VDC

    Type of isolation Optocoupler

    On/Off ON: > 10 VCurrent OFF: < 2.5 V

    Input Resistance: approx. 3 k

    Relay Output

    Output type 1 Normally Open contact

    Rated control capacity 2 A 250 VAC, 2 A 30 VDC (resistive load), max. 5 A / Common

    Operational life (mech.) Min. 5 million ops

    Operational life (electr.) Min. 100.000 ops at max. load

    Transistor Output

    Output type Open Collector

    Isolation Optocoupler

    Switched voltage 5 to 24 VDC

    Rated control capacity 0.5 A

    Type description C14/ 16 C24 (C) C40 (C) C56(C)/ 72(C)

    Inputs / Outputs 8/6 8/8 16/8 24/16 32/24 40/ 32

    Max. no. of I/O 54 56 104 120 136 15214/40 16/40 24/40/40 40/40/40 56/40/40 72/40/40

    Processingspeed 1,6 s per logical instruction

    Programme capacity 900 Commands 2720 Commands 5000 Commands

    Memory Type EEPROM RAM Standard, EPROM and EEPROM plug-in

    Number of CommandsBasic Commands 41 80 81Additional Commands 85 111 111

    Flags 256 1008

    Special Flags 64

    Timers / Counters 128 144

    Data Registers 256 1660 6144

    System Registers 70

    Index Registers 2 words

    Master Control Relays 16 32

    Label (JMP, LOOP) 32 64

    Step ladders 64 128

    Subroutines 8 16

    Interrupts 9

    Input time filtering(Selectable) 1 ms to 128 ms

    Pulse Catch Inputs(Selectable) 4 8

    Pulse outputs 1 (45 Hz-4,9 kHz) 2 (Multiplex)

    (45 Hz-4,9 kHz)

    Analogue Timers 1 2 4

    Communications optional 1 RS232C Interface (300 - 19200 Bit/s)

    Real Time Clock available

    Self Diagnosis Functions Watch-dog-Timer, Back-up Battery Supervision, Syntax Control

    Battery life appr. 27 000 h (C24C, C40C, C56C, C72C)(at 25 C) appr. 53 000 h (C24, C40, C56, C72)

  • The FP1 allows you to controlup to 152 individually-con-figured digital inputs and outputs. It is a simple matterof expanding the FP1 basicunit by connecting input andoutput modules using ribboncables in either one or twoexpansion stages. Relay and transistor outputs,PNP and NPN, 24 V DC and230 V AC supply voltages allexpansions can be combinedon a project-oriented basis.

    E8. The smallest expansion module:4 Inputs / 4 Outputs,

    8 Inputs or 8 OutputsRelays, transistor or triacDimensions (mm):

    80 x 81 x 45 (DC)

    E16 expansion module:8 Inputs / 8 Outputs,

    16 Inputs or 16 outputsRelays or transistorDimensions (mm):

    120 x 81 x 45 (DC)

    E24 expansion module:16 Inputs / 8 OutputsRelays or transistorDimensions (mm):

    190 x 96 x 45/74 (DC/AC)

    E40 expansion module:24 inputs / 16 outputsRelays or transistorDimensions (mm):

    260 x 96 x 45/74 (DC/AC)

    7

    E84 inputs and 4 outputs or8 inputs or 8 outputs

    Type

    E168 inputs and 8 outputs or16 inputs or 16 outputs

    E2416 inputs and8 outputs

    E4024 inputs and16 outputs

    E84 inputs and 4 outputs or8 inputs or 8 outputs

    E168 inputs and 8 outputs or16 inputs or 16 outputs

    E2416 inputs and8 outputs

    E4024 inputs and16 outputs

    E84 inputs and 4 outputs or8 inputs or 8 outputs

    E168 inputs and 8 outputs or16 inputs or 16 outputs

    E2416 inputs and8 outputs

    E4024 inputs and16 outputs

    C14C16

    Type C24C40

    Type C56C72

    First expansion Second expansion

    Intelligent Expansion.FP1 Expansion Modules.

  • Analogue Input Module.

    A maximum of one analogueinput module can be used foreach CPU base unit.

    Analogue Output Module.

    A maximum of two analogueoutput modules can be used foreach CPU base unit.

    No. of Inputs 4

    Voltage range 0-5 V DC / 0-10 V DC

    Current range 0-20 mA DC

    (Selectable with link)

    Resolution 1 / 1000 of full range (10 bit)

    Conversion time 2.5 ms per channel

    Dimensions (mm) 120 x 81 x45/74 (DC/AC)

    No. of Outputs 2

    Voltage range 0-5 V DC / 0-10 V DC

    Current range 0-20 mA DC

    (Selectable with link)

    Resolution 1 / 1000 of full range (10 bit)

    Conversion