MAST

DRAWWORKS

ENGINES/GENERATOR

SUBSTRUCTURE

ROTARY

TOP DRIVE

TRTRAVELING BLOCK

DRILLER CONTROLS

BOP

MUD PUMPS

MUD SYSTEM

DRILL PIPE

DRILL COLLARS

AUXILIAAUXILIARY EQUIPMENT

IDM 136' telescoping mast with 750,000# hookload & 20,000'+ racking capacity with 5'' drill pipe; Traveling block transports in mast; Raises and lowers using hydraulic cylinders

IDM DC 1500HP with 1-3/8" drill line

Three (3) Cummins KTA50 diesel engines each rated at 1470HP; Engines unitized with 1100kW generators; Includes 12,000-gallon fuel tank

IDM 22' substructure with 17.5' clear height, 750,000# rotary load, & 500,000# setback load; Raises and lowers using hydraulic cylindersRaises and lowers using hydraulic cylinders

37-1/2'' rotary independently driven by one (1) 800HP traction motor

Canrig 350-ton AC (with ''Rockit'' capability)

One (1) 400-ton, 6-sheave block, with a 12-line string-up

NOV Electronic Driller and Block Control System enable near steady state WOB while drilling; Block speed controls minimize swab and surge pressures and increase tripping efficiency; Drawworks speed is joystick-controlled with touch screen and manual control of E-Drill and SCR

One (1) 13-5/8'' 10M Single Ram BOPOne (1) 13-5/8'' 10M Single Ram BOPOne (1) 13-5/8'' 10M Double Ram BOPOne (1) 13-5/8'' 5M AnnularOne (1) 6-station accumulatorOne (1) 4'' 10K choke manifold

Two (2) 1600HP Triplex DC pumps with 7500PSI working pressure in the system

850 barrels total active capacity; Two (2) covered 425-barrel tanks with round bottoms and electric agitators for optimum mixing/blending and ease of clean out; Each tank contains two (2) 5x6x75HP agitators for optimum mixing/blending and ease of clean out; Each tank contains two (2) 5x6x75HP centrifugal pumps; Hopper is remote for ease of use with bulk tanks; Three (3) Brandt King Cobra shakers, one (1) Brandt DG-10 degasser, and one (1) Brandt SE-16 desilter are all unitized on a hydraulically raised mud processing skid; A separate skid incorporates one (1) 100-barrel trip tank with 2x3x40HP centrifugal pump; One (1) '' Mud gas separator

5" S-135 Drill pipe as required by contract

3-8" 21-6.5" Drill collars (quantity and size subject to availability)

Iron roughneckIron roughneck Hydraulic catwalkMotorized drill line spool Totco electronic drilling recorderMathey wireline unit with 25,000' of 0.092'' wireline Toolpusher & Crew Quarters Meeting and Change House Combo with A/C Pressure washer Water tank Walking system - 150’

ORION DRILLING COMPANY, LLC674 FLATO RD | CCTX 78405(361)299-9800

FOR MORE INFORMATION - ORIONDRILLING.COM