EC-2800

• Thank you for purchasing a Fujiiryoki massage chair.• Carefully read this operation manual before use and only use as directed.• Please read the Safety Precautions on pages 2-5 before use.• Keep this operation manual where it will be readily available for future referral.• Please recycle the outer packaging material where possible.

IMPORTANT SAFETY INSTRUCTIONS ............ 2Names and Function .......................................... 6Before Use ......................................................... 8Before using the chair ....................................... 10Before using the chair every time ..................... 14Adjusting the chair ............................................. 15How to use the massage ................................. 17How to use the recommended course............... 18Adjustment during massaging ........................... 20How to use the auto course .............................. 24How to use the basic course ........................... 26How to use the expert course ........................... 28Settings ............................................................ 31Changing massages during a massage ............ 33Maintenance and storage ................................. 34Q&A .................................................................. 36Trouble-shooting ............................................. 38Inspection ......................................................... 38After-sale service ............................................. 38Specifications ................................................... 39

Effect / EfficacySubstitution of massagefor home use

Massage ChairOperation manual

Please refer to pages 8-13 for assembling instructions.

• Read these 'Important Safety Instructions' before use and use this product properly.• These important safety instructions are prescribed to ensure correct usage of the product, and to

prevent injury and damage to the user and other persons.• To define the degree of injury and damage which may result from the incorrect handling of this product,

these important safety instructions have been segmented into two classifications; WARNING and CAUTION. Both are important matters regarding safety so please abide by both.

Improper usage may result in serious injury or death.

Improper usage may result in injury or damage to property.*

Prohibited actionsThe prohibited action is illustrated inside the illustration (for example,the illustration on the left refers to 'prohibiting disassembling')

Directives, actions which are compulsoryThe prohibited action is illustrated inside the illustration (for example,the illustration on the left refers to 'unplugging the power plug')

•Always keep this operation manual where it will be readily available for referral.

* property refers to houses, household belongings, domestic animals and pets.

When disposing of this product and/or its accessories, do so in accordance with local laws and regulations. For details please refer to your local authority.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

CAUTION

(Example of pictorial indication)

Attention

2

Immediately stop using the product if the cover is torn or holes are in the cover.Do not intentionally remove, tear or cut the cover.Never use the chair with the cover removed or torn as clothes and hair may get caughtin the knead balls.

The following persons must consult a medical physician before using this product.1. Persons using a medical electronic device embedded in the body such as a pacemaker susceptible to

the electromagnetic disturbances.2. Persons with malignant tumors. 3. Persons with heart diseases.4. Persons who are pregnant or those immediately after childbirth.5. Persons who suffer from paresthesia related to peripheral circulatory disturbance due to diabetes etc.6. Persons with wounds on their skin. 7. Persons in need of repose.8. Persons with body temperatures exceeding 38℃. (when strong acute inflammation symptoms,malaise,

hills, blood pressure fluctuations are observed, when debilitated)9. Persons who suffer from osteoporosis, spinal column fractures, or acute pains.10.Persons with abnormalities in the spine, or those whose spines are bent.11.Persons suffering from inflammation such as sprains and muscle strains.12.Persons with herniated disks.13.Persons who feel an abnormality on the body not prescribed above.If the chair stops moving or any abnormalities occur, unplug the power plug and contact the point of purchase for an inspection/repairs.Electrification, short circuits and fire may occur.Take care of the movements of the knead balls when massaging around the neck. Avoid excessive massaging or massaging the front of the neck.Accidents or injuries may occur.When lowering the footrest, be careful not to get hands or feet caught underneath the footrest.Always check underneath the footrest for people, pets, and other items.Injury may occur.

Do not use the chair when the power cord or its plug is damaged, or when the receptacleis loose. Contact your point of purchase for repairs if the power cord or power plug aredamaged in anyway.Continued usage may result in electric shocks, shortage, or even fire.

Do not use the chair other than on the designated voltage.Fire or electrification many occur.

The following persons are strongly recommended not to use this product.Certain physical abnormalities may occur.Persons prohibited from receiving a massage by a medical physician.(for example those suffering from thrombosis, severe aneurysm, acute varicose veins, various kinds of dermatitis and skin infections (including inflammations of subcutaneous tissue), etc.)

Do not damage the power cord. Do not process, unreasonably bend, pull, twist or tie the power cord. Do not place heavy items on the power cord. Do not get the power cord caught, especially when moving the chair.Doing so may cause damage, fire and electrification.

This appliance is not intended for use by persons (including children) with reduced physical,　sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Do not allow unattended children or persons unable to declare their own intentions to use this chair. Do not allow infants near the chair.Electrification or injuries may occur.Do not allow children to play or get on the chair. Accidents or injuries may occur.

(1) Below the chair. (2) Clearance between the seat backrest, the seat and the armrest.(3) Clearance between the footrest, the seat and the armrest. (4) Below the footrest and backside of the footrest.Otherwise, trouble or injury may be caused.

Always check behind the chair, and the area in front of and under the footrest for people, pets and items before reclining the seat back, or lowering/raising the footrest.

Continued use with rips or tears in the cloth of the seat back may cause electric shocks or injuries.

Before use, check underneath the back pad to make sure that there are no rips or tears in the cover cloth of the seat back. (should there be any rips or tears, no matter how small, immediatelydiscontinue use, disconnect the power cord, and ask for repairs to be conducted).

WARNING

3

Usage of this product should be limited to 15 minutes for each use. Continual use on the same part of the body should be limited to 5 minutes.Prolonged use may damage muscles and nerves (Only use for 30 minutes per day).

The following persons should consult a medical physician before using this product.1) Persons whose muscles have become weak due to increasing age, and those who are of slim build.2) Persons suffering from lower back pain caused by bones or internal organs.3) Persons easily bruised, susceptible to sprains. 4) Persons who suffer from intense motion sickness.5) Persons who have undergone internal organ or heart operations.

If you feel any physical abnormality during use, stop using the chair immediately and consult a doctor.

If any rashes, reddening of the skin, itches or similar symptoms appear after using this product,immediately stop using the product and consult a physician. Accidents and ill health may occur.

Turn the power switch OFF and unplug the power cord after use.This may result in accidents due to children's mischief.

Use the chair on a level surface. Damage or accidents may occur.

Make sure operation buttons and timers are operating normally before use.Accidents or injury may occur.

Read the operation manual once again and confirm the product is operating normally beforeusing the chair after a prolonged period of non-use. Accidents or injury may occur.

Consult a doctor or specialist if no benefits are realized after using the chair.

Sit down slowly after confirming the location of the knead balls. Accidents or injury may occur.

Install the chair carefully. Otherwise, the floor may be damaged.

When maintaining the chair always unplug the power cord. Do not unplug the power cordwith wet hands. This may cause electrification or injury.

Turn the power switch OFF and unplug the power cord in times of power shortages.When power is restored accidents may occur.

Pull out the power plug by holding the actual power plug and not the cord.This may cause electrification, short circuits, or fire.

Unplug the power plug when not using the chair.There is a danger that moisture may lead to insulation aging, which may cause electrification. or fire.

Check the main unit (seat, backrest and footrest) for any wedged foreign matter .An accident or injury may be caused.

Do not use or store in bathrooms or places of high humidity or moisture.Electrification, fire, accidents, and moulding may occur.

Never modify, disassemble nor repair the massage chair by yourself.Otherwise, the chair may catch fire or malfunction, resulting in injury.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

CAUTION

4

Do not try to sit or get up from the chair whilst the footrest is elevated.Doing so may result in damage to the chair or injury.

Do not use the chair whilst wearing earrings, necklaces, scarfs, or other ornaments.This may cause injury.

If you massage your hands and arms, remove any accessories such as fake finger nails, wrist watch, finger ring, bracelet, etc. Injury may be caused.

Do not use the chair whilst wearing hard objects on the head, such as hair ornaments. This may cause injury.

Do not use the thigh or hip massages with hard objects in pockets.This may cause accidents or injury.

Do not pull out the power cord, or turn off the power switch whilst using the chair. This may cause injury.

Do not sleep whilst using the chair. This may cause ill health or injury.

Do not use close to stoves or other sources of fire, nor smoke whilst using the chair.This may cause fire.

Do not stretch the cloth unreasonably or pierce with sharp objects.This may cause accidents or injury.

Do not wipe with benzine, paint thinner or alcohol, nor spray with any pharmaceutical sprays.This may cause fire or electrification.

Do not stand on the seat, or get on the seat back, footrest, arm or shoulder portion of the chair.The user or the chair may rollover and injury or accidents may result.

Make sure no more than 1 person is on the chair at any one time. Doing so may result in damage to the chair or injury.

Do not use while naked. Direct massages on the naked body may damage the skin.

Do not use on the elbow, knee, head, abdomen areas. Do not get hands or feet caughtin the knead balls. Injuries may occur.

Do not place hands or other parts of the body under the footrest or chair. Accidents or injury may occur.

Do not use accessories other than those which accompany the chair. Doing so may cause product malfunction.

Do not use other therapeutic equipment whilst using this product.

Not to be used for purposes other than massage purposes. This may cause damage or accidents.

Do not move the chair using the casters on easily scratchable surfaces.Be careful not to scratch the flooring.

Do not move the chair while people or items are on the chair. Damage or injuries may occur.

Do not allow the power cord and the remote control cord to get caught in the legs or casters.Injury may be caused.

Make sure the power plug is inserted firmly, and that there are no pins or debris on the plug.This may cause electrification, short circuits, or fire.

Do not overturn the chair or subject the chair to any strong shocks. Damage or injuries may occur.

Do not use immediately after eating. Nausea or illness may occur.

Do not use the chair after consuming alcohol. Accidents or injury may occur.

In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

CAUTION

5

Quick operation guide

Remote control stand

Ornament

Handle

Caster

Power cord plugPower cord

Massaging points

Back padSit back on this in acomfortable position.

Shoulder unitProvides an air massagefor the shoulders.

Arm unitAir massage for the arms.

Waist unitProvides an air massage for the waist andboth sides of thighs.

SeatProvides an airmassage for the hipand thighs (behind).

FootrestProvides an air massagefor the legs and feet.

PillowFlip over to the back when massaging.

Seat backProvides an air massage for the whole back.

Remote controllerOperates the main unit.

Power switchAlways turn OFF after use.

Hip Thigh(behind)

Calf

Ankle

Feet soles

Arm

Waist

Shoulder

Cord clip

Massage area covered by the mecha(knead ball) massage

Names and Functions

Chair

6

Displays the main menu screen.

● If the chair is not operated for more than 5 minutes, the display on the LED screen will turn off automatically.If the LED screen is not displayed, press the button.

● The reclining button, footrest button and storage button are operable when the power switch of the main unit (see page 6) is in the ON position.

Remote control

"ON/OFF" button

"Power" lamp

Stops all operations.(Press this button to stop massages immediately)

"STOP" button

"MENU" button

Information will be displayed.

LCD screen

The selection key for various functions.

"CROSS KEY"

Finalise your selection."OK" button

Adjusts the angle of the footrest.

"FOOTREST" RAISE and LOWER button

"RECLINING" RAISE and RECLINE buttonAdjusts the angle of the seat back and footrest. The footrest moves in concert with the seat back.

"RESET" buttonRaising of the seat back and lowering of the footrest.

7

Prepares and ends massage operations, and moves the kneading balls to the stored position after the end of the massage.

Turning on the massage chair by pressing the ON/OFF button will light up the power lamp.

7

Back pad

Screws

Hexagonal wrench

Remote control stand

Pillow• Operation manual• Quick operation guide

(2 pcs.)

Before Use

Operation manual and other documents

Attention

(Cross section)

Do not use any accessoriesother than those which comewith the chair.

Place the chair on a level surface with enough surrounding space.When the seat back is reclined, the footrest will elevate. Keep more than 40cm of space in front of the chair and more than 45cm of space behind the chair.

Attention 40cm or more 45cm or more

4mm

Using a mat of some kind underneath the chair is recommended to prevent from scratches in the flooring.

Attention

Avoid placing the chair in a place exposed to direct sunlight for prolonged hours, or in places susceptible to high temperatures, e.g.. close to heating appliances.There may be a possibility of the chair or the accessories discoloring or transforming.

Attention

Chair Accessories

Remove the chair and the accessories from the carton

Where to place the chair

8

How to move the chair

CAUTION

< When moving the massage chair by yourself >● Lift up the front side of the chair, and push it forward.

< When moving the massage chair in twos >● Lift up and move the massage chair while holding the front bottom and rear back side.

Caster

Lift up the frontof the chair.

● Do not move the chair with persons or items on the chair as the chair may overturn. Damage or injuries may occur.● Do not move the chair using the casters, or drag the chair as this may result in floor damage. ● Do not hold onto the seat and footrest. ● Be careful when lifting up the front side of the chair as the chair is very heavy. ● Do not allow the power cord and the remote control cord to get caught in the legs or casters. ● Work in twos or more persons when lifting and moving the massage chair.

9

Before using the chair

● Check whether the power cord, remote control cord or power plug are not damaged, and that there are no pins or debris on the plug.

Plug in the power cord.

Switch on the power switch.2

11

2● The power switch is located to the bottom, behind the chair.

Switch on the power

WARNING● Do not use the chair other than on the

designated voltage.● Do not use the chair when the power cord or its plug

is damaged, or when the receptacle is loose.Contact your point of purchase for repairs if the power cord or power plug are damaged in anyway.Damage or injuries may occur.

10

How to install the back pad and the pillow

Back pad

Zipper

2

1

Pillow

Pillow attachment surface

Velcro tape2)

1)

Raising the seat back

Press the button of the remote control to raise the seat back.

● Use the seat pad and remove the pillow when using the chair.

● If the massage feels strong, use the pillow.● When not using the massage functions of

the chair, attach the back pad and pillow, and use as a reclining chair.

● Operate the chair as explained in “How to use the reclining feature” (see page 15).

WARNINGBefore use, check underneath the back pad to make sure that there are no rips or tears in the cover cloth of the seat back (should there be any rips or tears, no matter how small, immediately discontinue use, disconnect the power cord, and ask for repairs to be conducted).Continued use with rips or tears in the cloth of the seat back may cause electric shocks or injuries.

Attach the pillow to the Velcro tape of the back pad.1) Turn up the Velcro tape on the pillow

attachment surface of the seat backrest so that the tape faces upward.

2) Attach the pillow to the Velcro tape 1) .

Attach the back pad to the zipper of the backrest.● When massaging, attach the back pad.

11

Ornament (with holes)

Concave portion

Anchor the remote control stand securely with the set screws.Anchor the remote control stand to the arm unit.Anchor the remote control stand in 2 positions using the set screws.

Attach the ornament (with holes).3

Detach the ornament.

When attaching the remote control stand on the left hand side.

1

2

How to install the remote control stand

Attach the ornament without holes on the right hand side.

Before using the chair

CAUTIONAttach the remote control stand properly. Failure to do so may result in the remote control stand coming loose which may result in accidents or injuries.

Hexagonal wrench

Remote control stand screws

Remote control stand

Left hand side

Ornament (with holes)

Ornament (without holes)

Right hand side

12

Tighten

Loosen

Fixing screw

How to install the remote control

Clamp the remote control cord so that it does not sag.1) Hang the cord on the cord clip from above.2) Clamp the remote control cord with Velcro tape.

1

Insert the remote control into the remote control stand.1) [Installation]

Insert the remote control from the bottom to the top.[Removal] Hold the top of the remote control and remove it while pulling toward you.

2) Turn the fixing screw and attach the remote control in a desired position.

2

Cord clip(Remote control cord)

Cord clip

1) 2)

2)1)

13

Always check the surrounding area of the chair.Always check behind the chair, and the area in front of and under the footrest for people, pets and other items.<the standby position>● When the button is pressed to start the massage, the

footrest will automatically elevate to the standby position.

Check the chair itself.1) Check underneath the back pad and

pillow to make sure that there are no rips or tears in the cover cloth of the seat back.

* Should there be any rips or tears, no matter how small, immediately discontinue use, disconnect the power cord, and ask for repairs to be conducted.

2) Check whether the power cord, remote control cord or any other items are not caught in the chair.

3) Check the position of the seat back and footrest before use.

● You may be injured if you sit on the chair recklessly with the seat backrest reclined or the footrest raised. Press and hold the button to store the seat backrest and footrest.

4) Check the position of the knead balls before use.● If the kneading balls are not in the stored

position, press the button to move them to the top position.

Back pad

Stored position

Pillow

<the standby position>

Before using the chair every time

Plug in the power cord.● Check whether the power cord, remote control cord

or power plug are not damaged, and that there are no pins or debris on the plug.

Switch on the power switch.● The power switch is located to the bottom,

behind the chair.

2

1 1

2

2

1

3)

4)

Switch on the power

Checklist

WARNING● Do not use the chair other than on the

designated voltage.● Do not use the chair when the power cord or its plug

is damaged, or when the receptacle is loose.Contact your point of purchase for repairs if the power cord or power plug are damaged in anyway.Damage or injuries may occur.

14

To recline the seat back, press the button.Stop pressing the button at the desired seat back angle.● The seat back continues to recline while the button is pressed and held,

until a beep sound is emitted.● The lower the seat backrest is reclined, the stronger the knead ball

pressure becomes.● The footrest also moves up and down in conjunction with the seat

back movement.● The reclining operation is disabled while the kneading balls are

stored.Recline the chair again after the kneading balls move to the storage position.

Adjusting the chair

How to use the reclining feature

WARNINGAlways check behind the chair, and the area in front of and under the footrest for people, pets and items before reclining the seat back, or lowering/raising the footrest.Not doing so may result in accidents and injury, or damage to property.

CAUTIONDo not stand on the seat, or seat back, footrest, shoulder or arm units.The user and/or chair may overturn, and may result in accidents or injuries.

When reclining the seat back while massaging, do so slowly taking the strength of the massage into consideration.If the seat back is reclined while massaging, the massage operation stops.

15

1

1

Attention

15

To adjust the footrest, press the button.Stop pressing the button at the desired angle.● The footrest continues to rise while the button is pressed and

held until a beep sound is emitted. * If the footrest is “OFF”, a beep sound is emitted also when it passes

the standby position. * The footrest will not return to the stored position when the "foot air"

option is "ON". * Turn the "foot air" option "OFF" to return the footrest to the stored

position (refer to page 23).

Push the footrest with the soles of the feet to adjust the footrest extension length.● The footrest returns to the original length when you raise your

legs.

2

1

If you press and hold the 　　button, the footrest lowers and the seat backrest rises.● If the button is pressed while massaging,

the massage operation ends.16

stored position

1

Adjusting the chair

How to use the footrest

How to use the reset function

CAUTION● Check the footrest for any foreign matter before use. An accident or injury may be caused.● Always check behind the chair, and the area in front of and under the footrest for people,

pets and items before reclining the seat back, or lowering/raising the footrest. Not doing so may result in accidents and injury, or damage to property.

● Be careful not to get your feet or hands caught under the footrest when lowering the footrest. This may result in injury.

16

Choose from 9 auto courses

Whole body rejuvenation course

Basic kneading and tapping massages

Expert knead massages

Select the desired massage course from the main menu.

Recommended Course

Auto Course

Basic Course

Expert Course

SettingsTo adjust strength level and shoulder position

● Sit deep in the chair and sit in a comfortable position with the head laid back on the seat back.● Adjust the reclining angle and the footrest angle (see pages 15 and 16).● If the LED screen is not displayed, press the button to display the LED screen.

● The selected course starts with the “AIR MASSAGE” and “FOOT STRETCH” ON. To turn "OFF" these options, refer to "Adjustments during massages" (see page 22).

17

Massage Chair Meister

Introductory Note

P18

P24

P26

P28

P31

1

How to use the massage

CAUTION● Usage of this product should be limited to 15 minutes for each use.

Continual use on the same part of the body should be limited to 5 minutes. Prolonged use may damage muscles and nerves.● If you massage your hands and arms, remove any accessories such

as fake finger nails, wrist watch, finger ring, bracelet, etc. Injury may be caused.

17

How to use the recommended course

To manually set the shoulder position

If you press the button during the automatic detection of the shoulder position, automatic detection is changed over to the manual setting mode.Using the buttons, set the kneading balls to the desired shoulder position and press the button.If the button is not pressed, the operation changes automatically to the massage operation in the last selected position.The shoulder position can be selected from 9 positions.

2

1

1

Select the “Recommended Course” from the main menu using the buttons, and press the button.

Automatic detection of the shoulder position starts.● During automatic detection, lean

back in the chair so that your head touches the seat back.

● When automatic detection ends, the main menu screen changes to the massage screen and massaging starts.

Position of knead balls Set the knead balls in between the base of the neck and the base of shoulder.

18

Target shoulder position

Shoulder Position

High

Low

18

To discontinue massage immediately To stop the massage during a massage

Mechanical massage strength

Status of air-operation

Name of current course

Remaining time

Position of kneading balls

3

4

5

Adjustment during massage

refer to page 25

refer to page 21

refer to page 22

19

CAUTIONTurn the power OFF and unplug the power cord from the power outlet after use.This will prevent possible accidents from misuse by children.

The course starts.● To set the mechanical/air-massage strength, function and shoulder position, refer to “Adustment

during massages” (see page 20).

The massage operation ends in about 15 min.● The main menu is displayed on the LED screen and the knead balls return to the stored positions.● After the knead balls are stored, press the button to raise the seat back and lower the footrest.

Turn the power OFF and unplug the power cord from the power outlet after use.● This is to prevent mis-operation by remote control.

Press the button.● The knead balls will stop in their present

position.

Press the button.● The knead balls will return to their stored

position.

19

Adjustment during massaging

Select a region using the buttons and select the desired massage strength using the buttons.● To make numerous changes, use the buttons to

select the next items without pressing the button.

To adjust the massage strength

Press the button to return to the course screen.● If no buttons are pressed, the screen returns to the

massage screen in about 10 seconds.

Press the

button.

2

3

1

123

Select the massage “Strength” using the buttons while the mas-sage screen appears, and press the button.

StrengthDisplay on remote control

8 levels 2 levels

1

2

3

4

5

6

7

8

Weak

Strong

2020

To adjust the shoulder and knead ball positions.

21

2

1

21

Select the “Shoulder Position” using the buttons while the mas-sage screen appears, and press the button.

Set the massage position to the de-sired shoulder position using the buttons.The knead balls will move to the set position.Press the button to enter the shoulder position.● If the button is not pressed, the operation changes

automatically to the massage operation in the last selected position.

● The shoulder position can be selected from 9 positions.● If you select the “Shoulder Position” during the massage,

the massage operation stops and the knead balls move to the selected shoulder position.

● If no buttons are pressed, the screen returns to the massage screen in about 10 seconds.

Shoulder Position

High

Low

21

Selection of “ON/OFF”

2

3

1

123

Change over using

buttons

22

Adjustment during massaging

Select the setting item you wish to change using the buttons, and change the setting item using the buttons.● To make numerous changes, use the buttons to select the

next items without pressing the button.

When the button is pressed, the screen returns to the massage screen.● If no buttons are pressed, the screen returns to the massage

screen in about 10 seconds.

To turn the “FOOTREST” and “AIR” massages ON/OFF

Select “Status” using the buttons while the mas-sage screen appears, and press the button.

Move using the

buttons.

22

[Foot stretch] The legs are grasped with airbags and pulled down to perform the leg stretching operation. ● The foot stretch function can be turned ON/OFF.● If the “foot stretch” function is turned ON while the footrest is in the

stored position, the footrest is raised automatically up to the standby position.

● The air-massage function can be turned ON/OFF for each part of the body.● If the “Leg stretch” function is turned ON when the footrest is in the

stored position, the footrest is raised automatically.

23

Setting of the “FOOTREST”

Setting of the “AIR”

23

How to use the auto course

123

Select the “Auto Course” from the main menu using the buttons, and press the button.

2

3

4

1

24

Select the desired massage course using the buttons.● The desired course can be selected from 9 courses.

Select the course and press the button.The auto detection of the shoulder position begins.● During auto detection, lean back in the

chair so that your head touches the seat back.

● When auto detection ends, the main menu screen changes to the massage screen and massaging starts.

● If you want to manually set the shoulder position, refer to “To manually set the shoulder position” (see page 18).

The selected massage course starts.● To set the mechanical/air-massage strength, function and

shoulder position, refer to “Adustment during massages” (see page 20).

● In the “Neck / Shoulder Course”, the strength of the “Waist” mecha massage cannot be set.In the “Waist course”, the strength of the “Shoulder” mecha massage cannot be set.

Moveusing

the

buttons.

Moveusing

the

buttons.

24

Types of auto courses

Whole Body StretchStretch massage course

Whole Body RejuvenationKneading and tapping to relieve tiredness

Whole Body RelaxKneading massage course

Whole Body SoftSoft air massage

Whole Body 7 Min Course 7 minute quick massage

Neck / Shoulder RejuvenationNeck and shoulder massage course centered on kneading and tapping to relieve the stiffness and fatigue.

Neck / Shoulder RelaxNeck and shoulder massage course centered on kneading.

Waist RejuvenationWaist massage course centered on kneading and tapping to relieve the stiffness and fatigue.

Waist RelaxWaist massage course centered on kneading.

25

Massage Chair SommelierMassage CChhaiir SSommelier

25

How to use the basic course

4

Select “Basic” from the main menu using the buttons, and press the button.

Select “Status” using the 　　 buttons while the massage screen appears, and press the button.

The massage starts.

Set the shoulder position.Set the desired shoulder position using the buttons.The knead balls move to the set position.Press the button to enter the shoulder position.● If the button is not pressed, the operation changes

automatically to the massage operation in the last selected position.

● The shoulder position can be selected from 9 positions.

2

3

1

12

456

26

Shoulder Position

High

Low

26

5

6

TappingRhythmically repeated tapping to relieve muscle fatigue

WaveletTapping and kneading to alleviate fatigue

KneadKneads stiff muscles

RollingStretches your body along the spine

Types of basic courses

-

-

TYPE

KneadTappingWavelet

Off

Direction Width Speed ROLLINGKnead Up / Down

-

- -

Automatic / Fast / SlowAutomatic / Wide / Normal / Narrow

Automatic / Wide / Normal / Narrow

Whole Body / Part / Off

Automatic / Fast / Slow Whole Body / Part / Off

Knead Up / Down Automatic / Fast / Slow Whole Body / Part / Off

Whole Body / Part / Off

Table of settings for the basic course for the back

The operation can be selected fromKnead Tapping Wavelet OFF .

Change the “Back” setting to the desired settings for “Type”, “Direction”, “Width”, “Speed” and “Rolling”.Select the item you want to change using the buttons, and change the item using the buttons.

● To make numerous changes, use the buttons to select the next items without pressing the button.

● The item displayed on the screen differs according to the selected massage operation.As for the items displayed on the screen, check the following “Table of basic operation settings for the Back.”

When the button is pressed, the screen returns to the massage screen.● If no buttons are pressed, the screen returns to the massage screen in about 10 seconds.● To set the mechanical/air-massage strength, status for “FOOTREST” and “AIR”, and shoulder position,

refer to “Adjustments during massages” (see page 20).

27

How to use the expert course

Select “Expert” from the main menu using the buttons, and press the button.

Select the desired massage technique from “Spine”, “Stretch”, “Shoulder / Waist”, “Loop” and “3D” using the buttons, and press the button.

The selected massage tech-nique is displayed.Select the desired massage technique using the buttons, and press the button.

The massage starts.

Set the shoulder position.Set the massage position to the desired shoulder position using the buttons.The knead balls move to the set position.Press the button to enter the shoulder position.● If the button is not pressed, the operation changes automatically to the massage operation

in the last selected position.● The shoulder position can be selected from 9 positions.

Shoulder Position

High

Low

2

3

4

1

528

123

4678

28

Stretch Knead UpStretch Knead Down

Loop Knead DownLoop Tapping3D Knead Up3D Knead Down3D Tapping3D Wavelet

Stretch Tapping

Stretch

Shoulder / Waist

Loop

3D

Stretch

Stretch WaveletShoulder BladeShoulder CareKIWAMI-Knead Shoulder

KIWAMI-Knead WaistKIWAMI-Tapping Waist

KIWAMI-Tapping Shoulder

Loop Knead Up

Spine CareSpine

Course Type Whole Body --

--

------

-

---

------

-----

●●●

●●●

●●

● ● ●● ● ●● ● ●

● ● ●● ● ●● ● ●● ● ●● ● ●● ● ●● ● ●

Part Off

Spine StretchWave Rolling

Table of settings for the expert course for the back

Select “Status” using the buttons while the massage screen appears, and press the button.

Change the “BACK” setting to the desired setting for “Rolling” from “Whole Body”, “PART” or “OFF”.The setting can be changed using the buttons.● “Rolling” may not be selectable according to the selected type of massage.

Check the following “Table of settings for “Expert Course” for the Back.”● The massage “Direction”, “Speed” and “Width” cannot be adjusted.

When the button is pressed, the screen returns to the massage screen.● If the massage chair is not operated, the screen returns to the massage screen in about 10 sec.● To set the mechanical / air-massage strength, moving functions for “FOOTREST” and “AIR” and

shoulder position, refer to “Adjustments during massages” (see page 20).

7

8

6

2929

Types of expert coursesSpine Care

Spin

e Massages the spine at the center of the body, in ascending motion

Spine StretchMassages the entire spine in ascending motion

Wave RollingKneads the whole back

Stretch Knead UpPresses up the muscles from below while kneading

Stretch Knead DownPresses down the muscles from above while massaging

Stretch TappingPresses up the muscles from below while kneading in a rhythmical movement

Stretch

Stre

tch

Presses up the muscles from below and massages your back while stretching

Stretch WaveletPresses up the muscles from below with a delicate movement such as tapping, while kneading

Shoulder Blade

Shou

lder

/ W

aist Rolls and massages the upper backside

portion of shoulder blades centered on the shoulder position

Shoulder CareKneads the shoulder muscle and presses the base of the shoulder and neck repeatedly with the ascending and descending motion of the kneading balls

KIWAMI-Knead ShoulderKneads around the shoulder thoroughly from above

KIWAMI-Knead WaistKneads around the waist thoroughly

KIWAMI-Tapping WaistMassages around the waist in a rhythmical movement

KIWAMI-Tapping ShoulderMassages around the shoulder from above in a rhythmical movement

Loop Knead Up

Loop

Kneads the muscles extensively in ascending motion

Loop Knead DownKneads the muscles extensively in descending motion

Loop TappingMassages a wide area while tapping

3D Knead Up

3D

Kneads the muscles with 3D movement while applying a back-and-forth movement to the ascending kneading motion

3D Knead DownKneads the muscles with 3D movement while applying a back-and-forth movement to the descending kneading motion

3D TappingRepeatedly taps the region in a rhythmical movement and massages the muscles with additional back-and-forth 3D movement

3D WaveletMassages the muscles with the back-and-forth 3D movement in addition to tapping while kneading

How to use the expert course

30

Massage “Strength” setting

“Shoulder Position” of the knead balls

Select “Settings” using the buttons, and press the button.Select the item you want to change using the buttons, and press the button.

Select the “Configuration” using the buttons, and press the button.Select the part using the buttons, select the desired massage strength using the buttons and press the button.

Select “Shoulder Position” using the buttons, and press the button.Using the buttons, set the knead balls to the desired shoulder position.The knead balls will move set position.Press the button to enter the shoulder position.● If the button is not pressed, the operation changes automatically to the massage operation

in the last selected position.● The shoulder position can be selected from 9 positions.● If you select the “Shoulder Position” during the massage, the massage operation stops and the

kneading balls move to the shoulder position.

Shoulder Position

High

Low

Settings

1

2

3

31

123

31

32

4

Language settings

4

Settings

Select the “Language Settings” using the button and press the button.Select the desired language from the “English” , “Simple Chinese” and “Complex Chinese” using the button , and press the button.

32

Changing massages during a massage

1

1

2

2

Press the button to display the main menu.

Choose from 9 auto courses

Whole body rejuvenation course

Basic kneading and tapping massages

Expert knead massages

Recommended Course

Auto Course

Basic Course

Expert Course

Select the massage you want using the buttons, and press the button.● The selected massage starts.● The timer continues to count the time.● The massage of the shoulder position continues.

33

P18

P24

P26

P28

33

Cover cloth, back pad, pillow and seat pad (made of PU leather)

Remote controller

Plastics parts

For plastics parts care, Wipe them out with a tight squeezed cloth which is water containing detergent .Then wipe them out thoroughly with a dry cloth until detergent is totally removed.*Wipe the coated surface with a dry cloth.

To clean the remote controller, use a dry cloth.

After cleaning, keep the chair away from humidity.In case of no use over the long time, protect the chair from dust with a cover cloth.

For leather part care, wipe it with a tight squeezed cloth which is water containing detergent.Then wipe it out with a tight squeezed cloth which is water contained.(Overuse of the massage chair may damage the cloth cover.)

Maintenance and storage

34

Keep the chair away from high temperature, high humidity and dust.Attention

Storage

CAUTIONFor storage, avoid the place exposed to direct sunlight for a long time or the place of high temperature. e.g.. close to a stove.Negligence may result discoloration ordeterioration of the chair.

CAUTIONDo not use a wet towel.injuries may occur.

CAUTIONAvoid the use of benzene, thinner, alcohol, solvents or abrasives.The user and/or chair may overturn, and may result in accidents or injuries.

CAUTION● Please take off a power plug from

a socket for care.Do not plug in and out with wet hands.

Negligence may result in electric shock or injury.

● Do not wipe it out with benzene, thinner or alcohol.Do not spray any chemicals on it. The use of these chemicals may cause electric shock or catch fire.

● Do not iron. The cloth cover may be damaged.

34

A mechanism is used to allow the two knead balls tapping alternately for making massage comfortable. As a result, a small gap may be produced in the position between them, and it may give rise to different massaging strength.This phenomenon does not come from the trouble of the chair.

There is difference in strength between left and right.Massaging position appears not be aligned either left and right not in parallel. Why?

Never do so. Fire may outbreak. The heat element, if damaged, may cause fire.

Is there no problem in placing a hot carpet under the chair?

After body shape is detected, the knead balls are ought to move to the shoulder position as pre programmed.If the shoulder position still does not fit in to you, make fine adjustment for the shoulder position. (See page 21)* In manual massage operations, the shoulder position is not automatically detected.

The shoulder position does not fit in to me, even after my body shape is detected. Why ?

Yes, they can. There is a possibility that the body shape may not be properly detected at the shoulder position, even if it is finely adjusted. Be advised as follows:●Those who are not tall : Put the backrest at the

upright position, and raise the footrest.●Those who are tall : Recline the backrest and

lower the footrest.

Those who less than 150cm(4'9") or more than 185cm(6'1")in height can use the chair, can't they?

Put the backrest at the upright position, and adjust the arm position.

My arm does not reach the armrest. How can I do so ?

A massage mark is likely to be left on your shoulder or arm after use. This is because of massage. It will be disappeared time by time. Please avoid shoulder exposed dress in the case of air shoulder massage.

After having air-massage of the shoulders and the arms,my skin becomes red. Why ?

It is unable to descend into the stored position under leg air operation.Turn leg air operation "OFF". (See page 22)

Is leg part unable to descend into the stored position?

Try to :●Recline the backrest.●Be deeply seated, and put your body weight on the

backrest.●Remove the back pad.

Are there any ways to strengthen the massage strength?

Try to :●Raise the seat backrest.●Place a back pad or pillow.●Put a blanket or leg sheet on the seat backrest.

Are there any ways to weaken the massage strength?

Please get your physician's advice. Massage relives the muscles' stiffness by giving pressure, and promotes blood circulation. As it may have adverse effects in certain diseases, be sure to consult your physician.

I am a patient under the treatment at a hospital.Are there any problems in using the chair?

Tighten the fixing screws again.Should the remote controller holder be unfastened, loosen the fixing screws first, and then tighten them.Check to make sure that the remote controller stand is not unfastened. If so, tighten it with a hexagonal wrench.

The remote controller stand is unstable. Why?

Q&ADisplacement ofknead balls

Tighten

Loosen

Fixing screw

3535

Maximum width approximately810mm

Product width approximately

710mm

Please see the drawings below.

Please tell me the dimension of the product?

Front

Side

Height approximately1150mm

Height approximately1150mm

Heightapproximately830mm

Depth (leg part is lower position)approximately 1650mm

Depth (leg part is upper position)approximately 1750mm

Maximum depthapproximately 1890mm

Depth (leg part is lower position)approximately 1340mm

Maximum depthapproximately 1600mm

Depth (leg part is upper position)approximately 1470mm

No reclining position In the case of reclining position

36

Q&A

Q12A

36

Is the power cord plug connected?Please plug a power cord into a power socket.

Please plug the power cord into thepower socket.

Is a power switch bottom of behind the chair turned off?

Is the backrest in touch with the wall or the like?

Is there any load given to the knead balls?(Should there be any load given to the knead balls, a safety mechanism works to stop all the functions.)

Was the massage chair used continuously for a long time?

Is the power cord plug connected?

Move the chair away from the wall or the like.

Is the backrest in touch with the wall or the like?

You may encounter the following phenomena while in massage. As being due to the mechanical design, they have nothing to do with the product life.

Set the power supply switch located under the backside of the main unit in the OFF position, unplug the power cord and then plug it back in.

It may be malfunction due to external noise.

Please switch on the power.

If the massage chair is used for a long time, the motor temperature rises until possibly triggering a safety device. Stop using the chair for about 1 hour.

The chair does not operate and a beep sound is emitted continuously from the remote control.

The chair does not operate and the lamp on the remote control flickers.

The chair does not start up.

The chair stops halfway.(The remote controller does not work.)

The backrest cannot be reclined.

Symptoms Check points Trouble-shooting Refer to Page

Move the chair away from the wall or the like. Please turn the power switch under the left armrest on again.

Take your body out of backrest for a moment. Turn the power on the bottom of behind the chair again and resume operation from the beginning.

● A "clatter" noise occurs when the knead balls go up and down.● A "creak" of the gear and the motor occurs while in massage.● A friction noise occurs when the knead balls rub the cover cloth

(particularly while in the process of kneading.)● A rattling noise occurs while in the "TAPPING" or "WAVELET" massage.

(particularly when the massage moves from the shoulders to the back)● In the "KNEAD", "TAPPING" or "WAVELET" massage, massaging

speed may vary with the knead balls' strength changes.A noise becomes different when the massaging speed is changed.

● A roaring noise of the motor occurs when load is given to the chair.● The compressor's noise and the air exhausting noise occur while in air-massage.● A noise occurs when the air bag is inflated. ● A screaming noise occurs while in massage of the shoulders.● A grinding noise occurs when the backrest is reclined.● The knead balls are not aligned in parallel between left and right.

(A mechanism is used to allow the two knead balls tapping alternately. As a result, a small gap may be produced in the position between them. This phenomenon is not due to the trouble of the chair.)

If the massage chair does not work normally or the same trouble occurs frequently even when the above measures are taken, set the power supply switch of the main unit in the OFF position, unplug the power cord from the outlet and ask the dealer for assistance.

Attention

6・14

6・14

6・14

6・14・15

6・8・14

6・14

－

6・14

Absolutely do not modify, disassemble or repair by yourself.Negligence may cause fire ormechanical trouble of the chair which may result in hazard on the body.

Trouble-shooting

37

WARNING

37

38

Trouble-shootingInspection

When using the chair after long storage, check to make sure that it operetes properly. Accidents or injury may occur.

When any abnormal condition persists checking in accordance with Page 37, stop the use, disconnect the power code plug from the receptacle and consult your dealer.

• For any other questions.If you have any questions regarding the after-sale services including repair, the warranty period, etc., please contact to your dealer.

• Time for retention of functional parts for repair.Functional parts for repair of this massage chair are retained six years after the termination of manufacture. The functional parts mean the parts, which are necessary to maintain the functions of product.

Are there these symptoms?• The chair emits a scorching smell.• The power cord or plug is overheated.• Electricity runs on or off with the power cord moved.• There are some other abnormalities.

For prevention of accident or trouble, turn the power switch OFF, disconnect the power cord plug with the receptacle, and contact your dealer.

InspectionImportant!

Be sure to make inspection for longer use.

Discontinueuse

After-sale service

Attention

38

* Use only on the designated voltage

Country Country

Upright position

Reclining position

EC-2800

Massage Chair

Electric massage chair for home use

130W

220-240V~

Knead

Tapping

Up and down

Mecha (knead balls)massage speed adjustment range

Product name

Model number

Generic name

Rating

Power supply (50/60 Hz)

Rated time

Power consumption (50/60 Hz)

Rated voltage

20 min.

(Varies from country to country)

Slow : approx. 320 cycles/min.Fast : approx. 420 cycles/min.

Slow : approx. 28 cycles/min.Fast : approx. 38 cycles/min.

Approx. 120 - 155°

Approx. W710 × D1890 × H830 (mm)

Approx. 76kg

Approx. W710 × D1340 × H1150 (mm)

Approx. 48kPaAir pressure for air-massage

Shoulder / Waist : 8-step adjustment

seat pad : 2-step adjustmentMecha (knead balls) massage strength

2-step adjustmentAir massage strength

Shoulder position adjustment

Auto-timer

9-step adjustment

Approx. 15min

Approx. 2.36 cm / sec.

PU leather

Reclining angle

Dimensions

Weight

Upholstery

Country of Origin

Seat Back

Approx. 35°- 70°Footrest

When air massage is on

Approx. 0°- 70°When air massage is off

Made in China

Specifications

3939