Upload
ngoque
View
221
Download
1
Embed Size (px)
Citation preview
for an on-site demonstration contact Sutton Tools on 1800 335 350
100% Australian Owned www.sutton.com.au
Masonry prograM
Totally New Technology
MasonryTrade tough quality, 2 cutting edges, carbide percussion tip with semi positive profile for aggressive drilling in hard material. Double Rolled flute provides greater dust extraction extending drill life.
PenetratorTungsten carbide tipped. Diamond ground percussion tip. Hexagonal shank for positive non slip drive.
Multi-PurposeGround carbide tip for rotary action only. The L-profile flute design efficiently extracts concrete, metal and wood particles. Ideal for drilling in multi laminated construction, such as through a steel bracket into masonry.
The flute (spiral) with a long pitch (lead) permits a quick removal of the aggregates (dust) the new finishing (treatment) “sandblasted” strengthens the body of the drill in the surface while guaranteeing good flexibility. Ideal for soft and medium hard materials and for wet concrete. The shank is suitable for all SDS plus hammer drilling machines.
Twister SDS Plus combines hi-tech with speed and efficiency. Concentrated on two specific points the Twister Plus technical improvements are innovative in the way the bit is cut. Special outlet throats accelerate the removal of drill waste. Drill bit head is honed for greater accuracy and an optimised percussion effect resulting in this drill being 30% quicker than comparable products. Self centring carbide tip and a unique flute design for fast swarf evacuation. Twister SDS Plus masonry drills are the fastest penetrating masonry drill on the market – guaranteed.
Booster SDS - Plus Masonry Drill features a self centering, solid carbide insert with 3 cutting edges unique flute design. Above and beyond the normal standards and quite simply unique, the Booster-plus is the all concrete solution for professionals equipped with SDS plus drilling machines. Its sturdiness gives it a life expectancy which is clearly better than that of traditional drills. The Booster Plus quality is far ahead of the standards making it an essential tool. Combining powerful impact force with incursion and efficiency on concrete and reinforced concrete provides five (5) times greater productivity.
With all the physical characteristics of the Booster Plus tip and with an SDS Max Shank, the Diager B3 Max drills are an SDS masonry revolution with quality exceeding the standard, the B3 Max is an essential tool capable of withstanding powerful impact, reinforced steel and mesh in concrete.
The Ultimax with 6 cutting edges has been designed for two main reasons: 1. Technically, to improve penetration speed, by using 6 points of
contacts which results in ideal centring and regularity of effort. Its tighter spiral increases rigidity.
2. Practically, vibration during drilling is greatly reduced.
With Drill Robustness, Precision, Long Life and Speed the Ultimax was developed for drilling through reinforced concrete. Studies on material resistance and tests under extreme conditions have culminated in solutions to all mechanical constraints.More Material Resists FlexFlex exerted in the lower section of a drill bit is the most likely destructive factor. The progressive core of the spiral adds material and increases the rigidity in this area which is subject to extreme pressure.Anti-blocking System6 asymmetric cutting edges reduce the risk of blockage when in use on a particularly hard aggregate, or on reinforced bar (rebar). The progressive core and roundness of the flute allow optimal removal of dust and negates any risk of blocking due to dust accumulation.Heat TreatmentThe hardness of the concrete combined with the power of the drill unite to create compression. The heat treatment of the body allows the energy of the drill to be concentrated on the tungsten carbide tip without absorbing shock waves.
Glass & TileGlass & Tile drill bits have a precision diamond ground carbide tip for exact pilot drilling with a high-temperature brazed carbide tip, cylindrical shank and a galvanised surface. The drill bit is suitable for drilling in tiles, porcelain and glass, however is not suitable for toughened glass. The drill bit should be used at slow speed on rotary only setting on the drill
Diamond CoreDiamond core bits have diamond encrusting to cut through materials including porcelain, sandstone, terracotta, ceramics and glass.
BlueCERAM
Blue Ceram’s secret lies in its revolutionary design and diamond segment technology, which enables the bit to be dressed. The core extraction chamber of Blue Ceram allows for waste evacuation.The Blue Ceram diamond-segment tip out performs standard tile drill bits giving you fast, accurate holes in dense, hard surfaces such as monocottura and glazed tiles, marble, china, sandstone, terracotta and ceramics.
Chisel tools with SDS Plus & SDS Max shanks for hammer action machines are made from treated high-tensile steel, suitable for tough demolition work. Styles available include Pointed, Flat, Angled, Toothed, Brick chasing and Concrete chasing suited to concrete brick and stone demolition.
www.sutton.com.au
Contents
Sutton Masonry 3
Sutton Penetrator 5
Sutton Multi-Purpose 7
Sutton Runner + 9
Diager Twister Plus & Multi-Fit 11
Diager Booster Plus 13
Diager B3Max 15
Diager Ultimax 17
Sutton Glass & Tile 19
P&N Diamond Core Bit 21
Sutton Blue Ceram 23
Diager Core Bits 25
Diager Chisels 27
Shanks 28
Performance Summary 29
www.sutton.com.au1
Maso
nry
Bit
Tungsten carbide tipped for drilling bricks tiles concreteN
ew
& Im
pro
ved D
esig
n/
/
ForBlueplug
8.0mm
x 120
Hamm
er
New
&ImImI
pm
pm
rororve
dD
esig
n
0x 120
TCT
PlainShank
www.sutton.com.au2
Brick
Granite
Stone
Concrete
pErForManCE
shank
double f uted spiral
Parallel shank.
Rolled double flute provides greater dust extraction
extending drill life.
Carbide percussion tip with semi positive profile for aggressive drilling in
hard materials.
2 cutting edges
3 1/8 Yellow • 60 2207054 5/32 75 2207125 3/16 White • 85 220729
150 2208355.5 7/32 Red • 95 220736
150 2208426 - 100 220743
150 2208596.5 1/4 Green • 100 220750
150 220866400 003740
7 9/32 100 220767150 220873
8 5/16 Blue • 120 220774150 220880400 005539
9 11/32 120 22078110 3/8 Orange • 120 220798
150 220897400 003177
11 Grey • 150 10 22090312 120 10 220811
150 10 22091013 1/2 120 10 220828
150 10 220927400 10 003948
14 9/16 150 10 22093416 5/8 Black • 150 12.7 220941
400 12.7 00471620 3/4 160 12.7 221337
400 12.7 00828822 7/8 160 12.7 221344
400 12.7 01082325 1 160 12.7 221351
400 12.7 009179
SetsSMD-2 (SF): 4.0, 5.0, 5.5, 6.5, 8.0, 10.0mm 6 080055SMD-3* (SF): 5.5x95, 6.5x100, 8.0x120 3 401010
Merchandiser**SMRY-8610 each5 each
2 each
(SF): 5.5, 6.5mm(SB): 5.5, 6.5, 10.0mm(SF): 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 10.0mm(SB): 5.0, 6.0, 7.0, 8.0, 11.0, 12.0, 13.0, 16.0mm
86 009636
Product Group A0604 A0604 A0604
Surface Finish Sandblasted Sandblasted Sandblasted
Material TCT TCT TCT
Application Standard Fixing Single Brick Double Brick
Packaging Single Pack Single Pack Single Pack
Order Quantity 1 1 1Diameter Plug Colour OA Length Shank Item # Price Item # Price Item # Pricemm inch
(SF) - Standard Fixing (SB) - Single Brick (DB) - Double Brick *Not available once current stock is depleted **Please contact your Sutton Tools representative when ordering merchandisers
SMRY-86
SMD-2
Masonry Set3 Piece
Hamm
er Action
New
& Im
pro
ved D
esig
n
redplug
5.5 6.5 8.0x95mm x100mm x120mm
greenplug
blueplug
Tungsten carbide tipped for drilling bricks tiles concrete/
/Ham
mer Action
New
& Im
pro
& Im
pro
& Im
ved
ved
v D
esig
ned D
esig
ned
redplug
greenplug
blueplug
Tungsten carbide tipped for drilling brickstiles
concrete/
ungsten carbide tipped for drilling bricks/ungsten carbide tipped for drilling bricksungsten carbide tipped for drilling bricks/ungsten carbide tipped for drilling bricks/ungsten carbide tipped for drilling bricks
/tiles/tiles/
SMD-3
www.sutton.com.au3
Prices exclude GST
Masonry Drill Bits Tungsten Carbide TippedTradesman quality for rotary and percussion drilling. Product packaging is colour code marked to indicate the correct plug size. Ideal for use in natural and artificial stone, masonry brickwork and concrete.Tungsten carbide tipped for increased life. Suitable for all impact drills or rotary hammer drills fitted with a chuck.Note: When using the rotary hammer, ensure you set the tool to impact mode.
M a s o n r y D r i l l s
Maso
nry
Bit
Tungsten carbide tipped for drilling bricks concrete, stoneDesigned for trade use
//
Penetrator/Hamm
er Action
For Blue plug
8.0mm
x 150
Maso
nry
Bit
Designed for trade use
Penetrator/Hamm
er Acti
Blue plug
0mm
50
HexShank
TCT
www.sutton.com.au4
Hexagonal shank for positive non slip drive.
Ground flute with special shape to increase dust
evacuation.
Tungsten Carbide Tipped. Diamond ground percussion tip.
hex shank
spiral f ute
2 cutting edges
Brick
Granite
Stone
Concrete
pErForManCE
5.0 White • 150 92 4.1 169545
5.5 Red • 150 92 4.3 169552
6.0 150 92 4.8 169569
6.5 Green • 150 92 4.7 169576
8.0 Blue • 150 92 6.7 169583
10.0 Orange • 150 92 8.1 169590
12.0 Grey • 150 92 8.9 169606
13.0 150 91 10.0 169613
14.0 150 91 10.9 169620
16.0 Black • 150 79 11.0 169637
20.0 160 89 11.0 169651
Merchandiser Pieces
PMD-241 each2 each3 each
13.0, 14.0, 16.0, 20.05.05.5, 6.0, 6.5, 8, 10, 12
24 176970
Product Group A0608
Surface Finish Bright
Material TCT
Application Single Brick
Packaging Single Pack
Order Quantity 1
Diameter Plug Colour OA Length Flute Length Hex Across Flat Item # Price
PMD-24
www.sutton.com.au5
Prices exclude GST
Penetrator Masonry Percussion Hammer Drill BitsProfessional quality for tougher masonry applications. Suitable for rotary and percussion this range of drills have hexagonal shanks and provide a more positive drive. Packaging is colour coded to indicate the correct plug size.This range is tungsten carbide tipped with a hex shank for maximum grip and power transfer.
P e n e t r a t o r M a s o n r y D r i l l s
New
& Im
pro
ved D
esig
n
ForBlueplug
8.0mm
x 120
Tungsten carbide tipped for drilling wood steel m
asonry/
/
Drill B
itM
ulti-Purpose
New
&ImImI
pm
pm
rororve
dD
esig
n
20 Drill B
itM
ulti-Purpose
PlainShank
TCT
www.sutton.com.au6
Parallel shank.
The L-profile flute design efficiently extracts concrete, metal and wood particles.
Ground carbide tip for non-hammer
action only.* For drilling wood, metal & masonry.
* Hammer & percussion action will damage the ground tip profile resulting in poor drilling performance. Drilling masonry materials prior to wood or steel will dull tip reducing the cutting performance.
shank
spiral f ute
2 cutting edges
Concrete
Brick
Metal
Wood
pErForManCE
Stone
Glass
3 1/8 Yellow • x 60 370256006
4 5/32 x 75 370256008
5 3/16 White • x 85 370256010
5.5 7/32 Red • x 85 370256011
6 - x 100 370256012
6.5 1/4 Green • x 100 370256013
x 300 370258013
7 9/32 x 100 370256014
x 300 370258014
8 5/16 Blue • x 120 370256016
x 300 370258016
9 11/32 x 120 370256018
10 3/8 Orange • x 120 370256020
x 300 370258020
12 - x 150 370257024
x 300 370258024
13 1/2 x 150 370257026
x 300 370258026
14 9/16 x 150 370257028
15 - x 150 370257030
16 5/8 Black • x 150 370257032
Merchandiser Pieces
Single Tier5 each
(SF) 3, 4, 5, 5.5, 6, 6.5, 7, 8, 10mm (SB) 12, 13
55 3707690340
Double Tier5 each
(SF) 3, 4, 5, 5.5, 6, 6.5, 7, 8, 9, 10mm (SB) 12, 13, 14, 15, 16mm (DB) 6.5, 7, 8, 10, 12, 13mm
105 3707690342
Product Group A0604 A0604 A0604
Surface Finish Bright Bright Bright
Material TCT TCT TCT
Application Standard Fixing Single Brick Double Brick
Packaging Single Pack Single Pack Single Pack
Order Quantity 1 1 1Diameter Plug Colour OA Length Shank Item # Price Item # Price Item # Pricemm inch
(SF) - Standard Fixing (SB) - Single Brick (DB) - Double Brick
www.sutton.com.au7
Prices exclude GST
M u l t i P u r p o s e D r i l l s
Drill Bits Multi-PurposeThe Heat treated body high grade carbide tip and high melt braze 1100ºC give this drill the ability to drill very hard materials. These multi-purpose bits can be used in concrete, bricks, stone, CSRTM Hebel®, Stainless Steel, Cast Iron, Steel & Glass.Features:• Ground carbide tip for rotary use only. Hammer and percussion action will damage the ground
tip profile resulting in poor drilling performance. Drilling masonry materials prior to wood or steel will dull tip reducing the cutting performance.
• The L-profile flute design efficiently extracts concrete, metal and wood particles.• Ideal for drilling in multi laminated construction, such as through a steel bracket into masonry.
NEW
Hamm
erSDS Plus
For soft to medium
hard materials - Concrete &
Masonry
Suitable for all SDS plus hamm
er drilling machines
ForBlueplug
8.0mm
x 160
Hamm
erlus
For soft to medium
hard materials - Concrete &
Mason
0x 160
TCT
www.sutton.com.au8
Suits all SDS-plus hammer machines.
Long pitch permits quick removal of aggregates.
Self-centering tip. Clean, accurate holes.
SDS-plus
spiral f ute
2 cutting edges
Stone
Concrete
Green concrete
pErForManCE
5 3/16 White • x 110 SDS Plus 370115010x 160 SDS Plus 370115110
6 - Red • x 110 SDS Plus 370115012x 160 SDS Plus 370115112x 210 SDS Plus 370115212
6.5 1/4 Green • x 110 SDS Plus 370115013x 160 SDS Plus 370115113x 210 SDS Plus 370115213
8 5/16 Blue • x 110 SDS Plus 370115016x 160 SDS Plus 370115116x 210 SDS Plus 370115216
10 3/8 Orange • x 160 SDS Plus 370115120x 210 SDS Plus 370115220
12 - Grey • x 160 SDS Plus 370115124x 210 SDS Plus 370115224
13 1/2 x 160 SDS Plus 37011512614 9/16 x 160 SDS Plus 370115128
x 210 SDS Plus 37011522816 5/8 Black • x 210 SDS Plus 370115232
Set
• • • • • 5, 6, 6.5, 8, 10 x 160 SDS Plus 370115405Merchandiser Pieces2 Tier5 each5 each 3 each5 each 3 each2 each
(110mm): 5.0, 6.0, 6.5, 8.0mm(160mm): 5.0, 6.0, 6.5, 8.0, 10.0, 12.0mm (160mm): 13.0, 14.0mm(210mm): 6.0, 6.5, 8.0, 10.0mm (210mm): 12.0, 14.0, 16.0mm (160mm): 5 piece set
87 370115300
Product Group A0608 A0608 A0608
Surface Finish Sandblasted Sandblasted Sandblasted
Material TCT TCT TCT
Application Standard Fixing Single Brick Double Brick
Packaging Single Pack Single Pack Single Pack
Order Quantity 1 1 1Diameter Plug Colour OA Length Shank Item # Price Item # Price Item # Pricemm inch
www.sutton.com.au9
Prices exclude GST
Drill Bits Runner +• Performances:
The flute with a long pitch permits a quick removal of the aggregates (dust); the new sandblasted finish strengthens the body of the drill in surface while guaranteeing a good flexibility.
• Versatile Drill: Ideal for soft and medium hard materials and for wet concrete
R u n n e r + S D S P l u s D r i l l s
NEW
TCT
www.sutton.com.au10
Self-centering tip. 160º angle. Maximised
chiseling effect and spalling of the concrete.30% faster than
conventional drills.
Available range in SDS-plus and
SDS-multifit Shanks.
SDS-plus SDS-multif t
Combining a compression channel with
a depression chamber gives an instant result:
perfectly controlled dust removal!
square spiral
concrete breaker tip
Brick
Granite
Stone
Concrete
pErForManCE
Product Group A0608 A0608
Shank SDS Plus SDS Multi-fit
Diameter OA Length
Flute Length Item # Price Item # Price
5 110 50 008366 152189160 100 008410 152264
5.5 110 50 023253 152196160 90 152271160 100 023277
6 110 50 008373 152202160 100 008427160 90 152288210 150 008533 152400260 200 008663310 250 023291
6.5 110 50 023260 152219160 90 152295160 100 020849210 150 020856 152417260 200 076389
7 110 50 152226160 90 152301160 100 008434
8 110 50 008397 152233160 90 152318160 100 008441210 150 008540 152431260 200 008670310 250 023307410 350 008786460 400 023413610 550 008908
1000 940 0090049 160 100 00845810 110 50 008403 152257
160 90 152332160 100 008465210 150 008564 152455260 200 008687 152592310 250 023314410 350 008793 152745460 400 023420610 550 008915
1000 940 00901111 160 100 00847212 160 90 152356
160 100 008489210 150 008571 152479260 200 008694 152615310 250 023321410 350 008809 152769460 400 023437610 550 008922
1000 940 00902813 160 90 152363
160 100 008496210 150 008588 152486260 200 008700 152622
Product Group A0608 A0608
Shank SDS Plus SDS Multi-fit
Diameter OA Length
Flute Length Item # Price Item # Price
310 250 054950410 350 008816 152776460 400 023444610 550 008939
14 160 90 152370160 100 008502210 150 008595 152493260 200 008717 152639310 250 023338410 350 008823460 400 023451610 550 0089461000 940 009035
15 160 100 00851916 160 90 152394
160 100 008526210 150 008618 152516260 200 008731 152653310 250 023352410 350 008847 152806460 400 023475610 550 0089531000 940 009042
18 210 150 008625 152523260 200 008748310 250 023369410 350 008854460 400 023482610 550 0089601000 940 009059
20 210 150 008632 152530260 200 008755 152684310 250 023376410 350 008878 152820460 400 023505610 550 0089771000 940 009066
22 210 150 008649260 200 008762 152691310 250 023383410 350 008885 152837460 400 023512610 550 008984
24 210 150 014817260 200 014824 152707310 250 023390410 350 014831460 400 023529610 550 027367
25 210 150 008656260 200 008779 152714310 250 023406410 350 008892 152851460 400 023536610 550 008991
www.sutton.com.au11
Prices exclude GST
T w i s t e r S D S P l u s / S D S M u l t i - f i t D r i l l s
Twister SDS Plus / SDS Multi-fitThe Twister style of SDS drills has a unique flute style that accelerates dust removal. This results in a very fast cycle time 30% faster than conventional brands. The unique tip is designed to reduce wandering.SDS Plus suits most SDS power tools excluding later model Ramset.SDS Multi Fit also suits older Ramset power tools. Complies with PGM standards and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.
TCT
www.sutton.com.au12
Suits all SDS-plus hammer machines.
SDS-plus
triple f uted spiral
Self-centering tip. Drills through
reinforced concrete.
3 cutting edges
Granite
Stone
Concrete
Reinforced concrete
pErForManCE
Brick
Combining a compression channel with
a depression chamber gives an instant result:
perfectly controlled dust removal!
6 110 50 SDS Plus 029385
160 100 SDS Plus 029408
210 150 SDS Plus 029446
310 250 SDS Plus 084186
6.5 110 50 SDS Plus 051577
160 100 SDS Plus 051584
210 150 SDS Plus 093607
310 250 SDS Plus 059443
8 110 50 SDS Plus 029392
160 100 SDS Plus 029415
210 150 SDS Plus 029453
310 250 SDS Plus 029484
460 400 SDS Plus 093034
10 110 50 SDS Plus 055728
160 100 SDS Plus 029422
210 150 SDS Plus 029460
310 250 SDS Plus 029491
460 400 SDS Plus 054295
12 160 100 SDS Plus 029439
210 150 SDS Plus 029477
310 250 SDS Plus 029507
460 400 SDS Plus 054301
13 160 100 SDS Plus 093591
210 150 SDS Plus 093638
14 160 100 SDS Plus 077911
210 150 SDS Plus 077935
310 250 SDS Plus 077959
460 400 SDS Plus 054318
16 210 150 SDS Plus 084155
310 250 SDS Plus 054264
460 400 SDS Plus 054325
18 210 150 SDS Plus 084162
310 250 SDS Plus 054271
460 400 SDS Plus 054332
20 210 150 SDS Plus 084179
310 250 SDS Plus 054288
460 400 SDS Plus 054349
Product Group A0608
Surface Finish Sandblasted
Material TCT
Point Type & Angle 3 Cutting Edge Self Centering
Packaging Single Pack
Order Quantity 1
Diameter OA Length Flute Length Shank Item # Price
www.sutton.com.au13
Prices exclude GST
Booster SDS - PlusThe Booster style of SDS drills has a unique flute style that accelerates dust removal. This results in a very fast cycle time 30% faster than conventional brands. The unique carbide point design with 3 cutting edges allows the booster to drill through reinforced concrete mesh. The drill will not snag which causes tip damage on conventional style masonry bits. SDS Plus suits most SDS power tools excluding later model Ramset.Complies with PGM standards and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.
B o o s t e r S D S P l u s D r i l l s
TCT
www.sutton.com.au14
Booster head
SDS-max
triple f uted spiral
Booster technology with SDS-max shanks.
Combining a compression passage
and depression chamber to accelerate the expulsion
of dust.
Self-centering tip. Drills through
reinforced concrete.
Stone
Hard Stone
Concrete
Reinforced concrete
pErForManCE
Granite
12 340 200 SDS Max 111806
540 400 SDS Max 111813
14 340 200 SDS Max 111820
540 400 SDS Max 111837
16 340 200 SDS Max 119383
540 400 SDS Max 119413
18 340 200 SDS Max 119390
540 400 SDS Max 119420
20 340 200 SDS Max 119406
540 400 SDS Max 119437
Product Group A0608
Surface Finish Sandblasted
Material TCT
Point Type & Angle 3 Cutting Edge Self Centering
Packaging Single Pack
Order Quantity 1
Diameter OA Length Flute Length Shank Item # Price
www.sutton.com.au15
Prices exclude GST
B3Max SDS - MaxThis range suits all SDS Max Rotary Hammer Drills. Suited to the drilling of reinforced concrete mesh.B3Max has Booster Plus tip geometry with SDS Max shank.Complies with PGM standards and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.
B 3 M a x S D S M a x D r i l l s
TCT
www.sutton.com.au16
Suits all SDS-max hammer machines.
SDS max
With centering tip. Does not bind in concrete.
Improved hole concentricity.
Long life and robustness. Perfectly controlled
dust removal. Reduced vibration
double f uted spiral
6 cutting edges
Granite
Stone
Concrete
Reinforced concrete
pErForManCE
16 340 200 SDS Max 004849
540 400 SDS Max 004955
690 550 SDS Max 005327
920 780 SDS Max 005464
18 340 200 SDS Max 004856
540 400 SDS Max 005136
690 550 SDS Max 005334
920 780 SDS Max 005471
20 340 200 SDS Max 004870
540 400 SDS Max 005150
690 550 SDS Max 005358
920 780 SDS Max 005495
1300 850 SDS Max 063297
1500 850 SDS Max 024120
22 340 200 SDS Max 004887
540 400 SDS Max 005167
690 550 SDS Max 005365
920 780 SDS Max 005501
1300 850 SDS Max 063303
24 340 200 SDS Max 004894
540 400 SDS Max 005174
690 550 SDS Max 005372
920 780 SDS Max 005518
1500 850 SDS Max 024137
25 340 200 SDS Max 004900
540 400 SDS Max 005181
690 550 SDS Max 005389
920 780 SDS Max 005525
1300 850 SDS Max 068193
1500 850 SDS Max 037625
26 340 200 SDS Max 004917
540 400 SDS Max 005198
690 550 SDS Max 005396
28 340 200 SDS Max 068261
540 400 SDS Max 005204
690 550 SDS Max 005402
920 780 SDS Max 005549
1300 850 SDS Max 063310
1500 850 SDS Max 024144
30 340 200 SDS Max 028760
540 400 SDS Max 005228
690 550 SDS Max 005426
920 780 SDS Max 005563
32 340 200 SDS Max 068278
540 400 SDS Max 005235
690 550 SDS Max 005433
920 780 SDS Max 005570
1300 850 SDS Max 028746
1500 850 SDS Max 024151
35 1300 850 SDS Max 063327
36 340 200 SDS Max 063440
540 400 SDS Max 005259
690 550 SDS Max 005457
920 780 SDS Max 005594
1300 850 SDS Max 063334
1500 850 SDS Max 024168
38 340 200 SDS Max 063457
540 400 SDS Max 023093
690 550 SDS Max 028685
40 340 200 SDS Max 063464
540 400 SDS Max 023109
690 550 SDS Max 028692
920 780 SDS Max 005600
1500 850 SDS Max 063365
42 340 200 SDS Max 063402
540 400 SDS Max 023116
690 550 SDS Max 063389
920 780 SDS Max 021464
1300 850 SDS Max 063341
1500 850 SDS Max 063372
45 340 200 SDS Max 063471
540 400 SDS Max 063419
690 550 SDS Max 063396
920 780 SDS Max 024113
1300 850 SDS Max 063358
1500 850 SDS Max 027091
Product Group A0608
Surface Finish Sandblasted
Material TCT
Point Type & Angle 6 Cutting Edge Self Centering
Packaging Single Pack
Order Quantity 1
Diameter OA Length Flute Length Shank Item # Price
Product Group A0608
Surface Finish Sandblasted
Material TCT
Point Type & Angle 6 Cutting Edge Self Centering
Packaging Single Pack
Order Quantity 1
Diameter OA Length Flute Length Shank Item # Price
www.sutton.com.au17
Prices exclude GST
Ultimax SDS - MaxThe Ultimax style of SDS drills has a wide spiral flute for easy drilling, penetration and dust removal. The 3 carbide tips and 6 cutting edges gives this product the ability to cut through reinforced concrete mesh, granite, marble, CSRTM Hebel®, brick, stone and hard stone.This range suits all SDS Max Rotary Hammer Drills.Complies with PGM standards and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.
U l t i m a x S D S M a x D r i l l s
PlainShank
www.sutton.com.au18
Parallel shank.
Tungsten Carbide Tipped. 4 edge spear design.
Shaves rather than cuts.
4 edge tip
shank
Cement Sheet
Tile
Glass
pErForManCE
3.0 169668
4.0 169675
5.0 169743
6.0 169699
6.5 411187
8.0 169712
10.0 169729
12.0 169736
Product Group A0608
Surface Finish Bright
Material TCT
Point Type & Angle 4 Edge Spear
Packaging Single Pack
Order Quantity 1
Diameter Item # Price
www.sutton.com.au19
Prices exclude GST
G l a s s & T i l e D r i l l s
Glass & Tile Drill BitsSometimes called Spear Point Drills. Precision ground carbide tipped for exact drilling. High tempered brazed carbide tip. This design is intended to produce clean holes in ceramic tiles, porcelain and glass. NOTE: not suitable for toughened glass. These drill bits need to be used at a slow speed, non impact, with suitable coolant.
HollowShank
www.sutton.com.au20
tip
shank
Hollow core allows internal coolant.
Diamond resin bonded.For wet drilling only.
Glass (not safety)
Ceramic
Terracotta
Sandstone
pErForManCE
Glazed Tile
Product Group A0606
Surface Finish Bright
Material Diamond Plated
Point Type & Angle -
Packaging Single Pack
Order Quantity 1
Diameter Item # Price
6.0 148010006
8.0 148010008
10.0 148010010
12.0 148010012
15.0 148010015
20.0 148010020
25.0 148010025
www.sutton.com.au21
Prices exclude GST
D i a m o n d C o r e B i t s
Diamond Core BitsDiamond Tile Core bits have diamond encrusting to cut through glazed and polished porcelain, sandstone, terracotta and ceramics.Suitable for tiling, plumbing, electrical, building trade and DIY handy person applications.• Now cuts to ±0.2mm.
HexShank
www.sutton.com.au22
shank
tip
shank
10mm hexagonal
shank.
Core extraction cavity.
Trade quality.
Diamond segment tip for long life. Can be dressed
for optimal performance
Marble
Glazed & Polished
Fully Vitrified
Monocottura
pErForManCE
Sandstone
Granite
Porcelain
Terracotta
Standard Ceramics
Drill Bit Range
6 Red • 10mm Hex 3000 D605 0600
7 Green • 10mm Hex 3000 D605 0700
8 Blue • 10mm Hex 3000 D605 0800
10 Orange • 10mm Hex 3000 D605 1000
12 Grey • 10mm Hex 3000 D605 1200
15 Black • 10mm Hex 3000 D605 1500
20 10mm Hex 3000 D605 2000
25 10mm Hex 3000 D605 2500
Dressing Stone D605 ST01
Water Dripper Suits 5-35mm drills D605 WAT1
Merchandiser Contents Pieces D605 MER1
1 each2 each
7, 10, 12, 15, 20, 25, Stone6, 8
11
Product Group A0608
Surface Finish Bright
Material Diamond Composite
Point Type & Angle Segment Tip
Packaging Single Pack
Order Quantity 1
Diameter Plug Colour Shank Speed RPM* Item # Price
water dripper
*Wet drilling
BlueCERAM
www.sutton.com.au23
Prices exclude GST
B l u e C e r a m D i a m o n d C o r e B i t s
NEWBlue Ceram - Diamond Core BitSutton Tools Blue Ceram diamond core bits are manufactured to precision standards from the highest quality materials. New diamond segment technology enables the bit to be dressed. They are the ideal choice for the professional Trade & DIY person.• Diamond segment tip• Core extraction cavity• 10mm hexagonal shank
Instructions For Use1 Water the drilling area. To avoid
drill slipping start with a 45º angle.2 After the hole is started gradually straighten up the drill.3 Make a swinging movement to allow for dust evacuation.4 Make sure the core has been removed from bit after drilling.
Helpful Hints• Do not use with hammer setting
as this will damage the bit and tile.• Do not press strongly on the tool - let it do the work • Cutting speed with water <3000 RPM• Cutting speed dry <11000 RPM• Dressing the bit will increased performance
1
2
3
4
A heating up (darkened segment) causes a lower cutting power and needs to be dressed for better performance.
Dressing refreshes the cutting power of the tool. To dress the tool, make a hole in the stone with slow speed.
Dressing
Standard Ceramics
Terracotta
Porcelain
Sandstone
Marble
Polished Sandstone
Monocottura & Fully Vitrified
Glazed
TCT
www.sutton.com.au24
SDS-max
SDS-plus
Ø 30 to 125mmHeavy duty taper crown carbide
core bit for building, plumbing, and restoration work. For al types of
hammer drills over 900W.
Ø 25 to 90mmLight duty for electrical
equipment and door frames. For impact drills and light hammer drills
not exceeding 700W.
Granite
Stone
Concrete
Reinforced concrete
pErForManCE
Brick
Masonry Hammer Carbide Core Bits (Light Duty)25 60 5 SDS Plus 01593730 60 5 SDS Plus 01594435 60 5 SDS Plus 01595140 60 6 SDS Plus 01596845 60 6 SDS Plus 01597550 60 7 SDS Plus 01598260 60 8 SDS Plus 01599966 60 8 SDS Plus 01600268 60 8 SDS Plus 02425070 60 8 SDS Plus 01601980 60 9 SDS Plus 01602690 60 10 SDS Plus 016033
*Core bits & adaptors sold separatelyAdaptors For Masonry Carbide Core Bits (Including Pilot Drill)
90 SDS Plus 063730150 SDS Plus 016057200 SDS Plus 016064300 SDS Plus 016071135 Hexagonal 063747
Taper Crown Hammer Carbide Core Bits (Heavy Duty)30 90 5 SDS Max 01608835 90 5 SDS Max 01609540 90 6 SDS Max 01274545 90 6 SDS Max 01610150 90 7 SDS Max 01611860 90 8 SDS Max 01275266 90 8 SDS Max 01276970 90 8 SDS Max 01612580 90 9 SDS Max 01613290 90 10 SDS Max 016149100 90 11 SDS Max 012776110 90 11 SDS Max 016156125 90 12 SDS Max 016163
*Core bits & adaptors sold separatelyAdaptors For Crown Core Bit (Excluding Pilot Drill)
220 SDS Max 016194420 SDS Max 012790700 SDS Max 016200900 SDS Max 063969
Crown Pilot Drill Taper centring drill bit 11x120 012806Drift Key 012813
Product Group A0608
Surface Finish Sandblasted
Material High Tensile Body, TCT
Point Type & Angle
Packaging Single Pack
Order Quantity 1
Diameter Working Length Teeth Shank Item # Price
Masonry Adaptor
Masonry Hammer Carbide Core Bits (Light Duty)
Crown Adaptor Crown PilotDrift Key
Taper Crown Hammer Carbide Core Bits (Heavy Duty)
www.sutton.com.au25
Prices exclude GST
T C T C o r e B i t s
Core Bits SDS Plus & SDS MaxDiager core bits come with tungsten carbide tipped teeth to suit both SDS Plus and SDS Max power tools. Core bits are used for larger holes in masonry type products. The core tends to crumble under the hammer operation. They are used predominantly in plumbing and electrical applications such as drainage and water pipes, heating pipes, switches, junction and distribution boxes.
www.sutton.com.au26
Brick
Stone
Concrete
pErForManCE
For general purpose chiselling & breaking work in brickwork,
concrete & loose stone.
For repointing, taking out whole bricks intact, removing tiles &
plaster.
For cutting narrow channels into concrete.
concrete chasing
toothed
f at
For general purpose chiselling & breaking work in brickwork,
concrete & loose stone.
For easy removal of tiles (with ergonomically
angled working end).
For cutting channels in limestone, concrete, brick
& pumice block. Ideal for cabling & plumbing
applications.
brick chasing
angle headpointed
SDS-Plus
Concrete Chasing 22 250 SDS Plus 063686
Flat 20 250 SDS Plus 063518
40 200 SDS Plus 063525
Angled 40 200 SDS Plus 063648
Pointed 14 250 SDS Plus 022171
SDS-Max
Brick Chasing 35 380 SDS Max 063716
Concrete Chasing 26 300 SDS Max 063693
Toothed 40 280 SDS Max 063662
Flat 24 280 SDS Max 063549
24 400 SDS Max 061514
24 600 SDS Max 075368
50 360 SDS Max 063556
80 300 SDS Max 063563
115 350 SDS Max 063570
Angled 50 300 SDS Max 063655
Pointed 18 280 SDS Max 063488
18 400 SDS Max 061521
18 600 SDS Max 063495
Product Group A0608
Surface Finish Sandblasted
Material High Tensile Steel
Point Type & Angle Application
Packaging Single Pack
Order Quantity 1
Type Size OA Length Shank Item # Price
Poi
nted
Flat
Ang
led
Toot
hed
Bric
k C
hasi
ng
Con
cret
e C
hasi
ng
www.sutton.com.au27
Prices exclude GST
C h i s e l s S D S P l u s / S D S M a x
Chisels SDS Plus & SDS MaxRanges of chisels for both SDS Plus and SDS Max. These tools are used in construction, renovation, demolition, breaking through brick walls, knocking off plaster and ripping up asphalt. Specially toughened steel and optimum cutter geometry ensure long life and fast, efficient work.
ShanksParallel / Plain Shank
PlainShank
The straight shank is the most usual style on modern drill bits, by number manufactured. It is most often made with the same diameter as the drill bit, for economy. It’s then held in a 3-jaw drill chuck. Very small bits can have straight shanks larger than the drill diameter, often for holding in a standard size collet. Large drill bits can have straight shanks smaller than their drill diameter, so that medium-size chucks can be used to drill large holes. Such a drill bit is called reduced-shank or a blacksmith’s drill. • Can be held in a collet chuck • Can be held in a drill chuck, the commonest sort • Very accurate centering • Low torque transmission
Hex shank
HexShank
The flats of a hex shank can either be machined on a round shank or can be the natural flats of hex bar stock. A hex shank can be grasped by a 3-jaw drill chuck, or can be held in a custom chuck specifically for hex shanks. 1/4 inch hex shanks are common for machine screwdriver bits, and have spread from that application to be used for drill bits that are compatible with screwdriver machinery.• Can be held in a drill chuck • Can be held in a screwdriver bit chuck • High torque transmission • Moderately accurate centring • Cannot be held in a collet
SDS shankThe SDS shank has the advantage of a simple spring-loaded chuck, so that bits can be chucked with a simple and quick hand action. Further, the shank and chuck are uniquely suited to hammer drilling in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. So, SDS shanks are most often seen on masonry drills, for which hammer drilling action is most helpful.
SDS is available in four sizes, SDS, SDS plus (or SDS-plus or SDS+), SDS-Top and SDS-max. SDS-plus is the most common by count of tools manufactured, with masonry drills from 5mm diameter to 30mm diameter ordinarily available.
The SDS bit was developed in 1975 and the name comes from the German saying “Steck - Dreh - Sitz” (Insert - Twist - Stay).
German-speaking countries may use “Spannen Durch System” (Clamping System), though most use “Special Direct System” for international purposes.• Superb hammer drilling performance • Drills with a “rotation-stop” mode can use chiselling bits • One-handed quick chucking operation • Can only be held in an SDS chuck • High torque transmissionThe flute (spiral) with a long pitch (lead) permits a quick removal of the aggregates (dust) the new finishing (treatment) “sandblasted” strengthens the body of the drill in the surface while guaranteeing good flexibility. Ideal for soft and medium hard materials and for wet concrete. The shank is suitable for all SDS plus hammer drilling machines.
HollowShank
34mm
28.5mm
25mm
27.5mm
25mm
18m
m10
mm
10m
m
68mm
64mm
61.5mm
34mm
28.5mm
SDS Multi
SDS Plus
SDS Max
SDS Multi
SDS Plus
SDS Max
25mm
27.5mm
25mm
18m
m10
mm
10m
m
68mm
64mm
61.5mm
www.sutton.com.au28
Performance SummaryMaterial Selection Chart
Environmental StatementDiager and Sutton masonry drills are certified ISO 14001 for sustainable development. These products contribute to environmental protection by a “sandblasted” surface treatment which guarantees zero heavy metals and by a protection called “without VOC (Volatile Organic Compounds)” meeting the European directive 1999/13CE
Icon Descriptions Country of origin Where the product is Manufactured and sourced.
Complies with PGM standards (PGM stands for “Prufgemeinschaft Mauerbohrer” - drill bit testing) and is the only guarantee of a perfect geometry for the precise drilling and preferred setting of your anchor studs. This marking is the proof for the suitability of the masonry drill bit. It is recommended to use only drill bits with this marking for anchor fixings to prevent accidents and liability cases.
5 Best solution to perform task
✘ Not recommended
4 Most suitable to perform task
3 More suitable to perform task
2 Suitable to perform task
1 Adequate to perform task1 Adequate to perform task
pErForManCE IndICator
Material Selection Chart
Conc
rete
Gree
n Co
ncre
te
Rein
forc
ed
Conc
rete
Ston
e
Bric
k
Gran
ite
Mar
ble
Cera
mic
s
Glas
s
Fibr
o Ce
men
t
CSR
Hebe
l
Tim
ber
Stee
l
Masonry Drill 5 5 ✘ 4 4 1 1 ✘ ✘ 5 4 ✘ ✘
Penetrator Masonry Drill 5 5 ✘ 4 4 1 1 ✘ ✘ 5 4 ✘ ✘
Multi Purpose Drill 3 3 4 3 3 3 1 1 1 3 3 2 2
Runner+ 3 3 ✘ 3 3 3 ✘ ✘ ✘ 3 3 ✘ ✘
Twister SDS Plus 5 5 ✘ 4 4 3 ✘ ✘ ✘ 4 4 ✘ ✘
Booster SDS Plus 4 4 5 4 4 4 3 ✘ ✘ 3 5 ✘ ✘
B3Max SDS Max 4 4 5 4 4 4 3 ✘ ✘ 3 5 ✘ ✘
Ultimax SDS Max 5 5 3 5 5 2 2 ✘ ✘ 3 5 ✘ ✘
Glass & Tile Drill ✘ ✘ ✘ ✘ ✘ ✘ ✘ 5 5 3 ✘ ✘ ✘
TCT Core Bits 5 4 3 3 4 4 4 3 ✘ 3 ✘ ✘ ✘
Diamond Core Bit ✘ ✘ ✘ ✘ ✘ 1 1 3 2 ✘ ✘ ✘ ✘
Blue Ceram ✘ ✘ ✘ ✘ ✘ 4 4 5 ✘ ✘ ✘ ✘ ✘
Chisels SDS Plus / SDS Max 5 5 ✘ 5 5 ✘ ✘ ✘ ✘ 5 5 ✘ ✘
www.sutton.com.au29
4999
8006
9_06
10
9311963
512655
Sutton Tools Pty Ltd 100% Australian Owned Company
Head Office 378 Settlement Road Thomastown 3074 Victoria Australia T +61 3 9280 0800 F +61 3 9464 0015 E [email protected]
Customer Service T 1800 335 350 F 1800 333 127 E [email protected]
www.sutton.com.au
Distributed By: